Skip to contentSkip to conversation

dmaengine: ste_dma40: fix unneeded variable warning

PATCH New Sasha Levin 1 participant 12 messages Aug 20, 2019

Subsystems (8)
Stable branch USB Block layer IIO +4 more subsystems
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/12 dmaengine: ste_dma40: fix unneeded variable warning

From: Arnd Bergmann <[email protected]>

[ Upstream commit 5d6fb560729a5d5554e23db8d00eb57cd0021083 ]

clang-9 points out that there are two variables that depending on the configuration may only be used in an ARRAY_SIZE() expression but not referenced:

drivers/dma/ste_dma40.c:145:12: error: variable 'd40_backup_regs' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]

static u32 d40_backup_regs[] = {
           ^

drivers/dma/ste_dma40.c:214:12: error: variable 'd40_backup_regs_chan' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration] static u32 d40_backup_regs_chan[] = {

Mark these __maybe_unused to shut up the warning.

---
 drivers/dma/ste_dma40.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/dma/ste_dma40.c +2 -2
index c2b089af04208..90feb6a05e59b 100644
@@ -142,7 +142,7 @@ enum d40_events {
  * when the DMA hw is powered off.
  * TODO: Add save/restore of D40_DREG_GCC on dma40 v3 or later, if that works.
  */
-static u32 d40_backup_regs[] = {
+static __maybe_unused u32 d40_backup_regs[] = {
 	D40_DREG_LCPA,
 	D40_DREG_LCLA,
 	D40_DREG_PRMSE,
@@ -211,7 +211,7 @@ static u32 d40_backup_regs_v4b[] = {
 
 #define BACKUP_REGS_SZ_V4B ARRAY_SIZE(d40_backup_regs_v4b)
 
-static u32 d40_backup_regs_chan[] = {
+static __maybe_unused u32 d40_backup_regs_chan[] = {
 	D40_CHAN_REG_SSCFG,
 	D40_CHAN_REG_SSELT,
 	D40_CHAN_REG_SSPTR,
Signature · 1 line
2.20.1
author maintainer
#1 lore raw

PATCH 2/12 iio: adc: max9611: Fix temperature reading in probe

From: Jacopo Mondi <[email protected]>

[ Upstream commit b9ddd5091160793ee9fac10da765cf3f53d2aaf0 ]

The max9611 driver reads the die temperature at probe time to validate the communication channel. Use the actual read value to perform the test instead of the read function return value, which was mistakenly used so far.

The temperature reading test was only successful because the 0 return value is in the range of supported temperatures.

Fixes 69780a3bbc0b ("iio: adc: Add Maxim max9611 ADC driver")
---
 drivers/iio/adc/max9611.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/adc/max9611.c +1 -1
index f8f298c33b287..c61fbf5602718 100644
@@ -484,7 +484,7 @@ static int max9611_init(struct max9611_dev *max9611)
 	if (ret)
 		return ret;
 
-	regval = ret & MAX9611_TEMP_MASK;
+	regval &= MAX9611_TEMP_MASK;
 
 	if ((regval > MAX9611_TEMP_MAX_POS &&
 	     regval < MAX9611_TEMP_MIN_NEG) ||
Signature · 1 line
2.20.1
author maintainer
#2 lore raw

PATCH 3/12 auxdisplay: panel: need to delete scan_timer when misc_register fails in panel_attach

In reply to Sasha Levin

From: zhengbin <[email protected]>

[ Upstream commit b33d567560c1aadf3033290d74d4fd67af47aa61 ]

In panel_attach, if misc_register fails, we need to delete scan_timer, which was setup in keypad_init->init_scan_timer.

---
 drivers/auxdisplay/panel.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/auxdisplay/panel.c +2 -0
index 6911acd896d93..e30953ceb7dfd 100644
@@ -1622,6 +1622,8 @@ static void panel_attach(struct parport *port)
 	return;
 
 err_lcd_unreg:
+	if (scan_timer.function)
+		del_timer_sync(&scan_timer);
 	if (lcd.enabled)
 		charlcd_unregister(lcd.charlcd);
 err_unreg_device:
Signature · 1 line
2.20.1
author maintainer
#3 lore raw

PATCH 4/12 iommu/dma: Handle SG length overflow better

In reply to Sasha Levin

From: Robin Murphy <[email protected]>

[ Upstream commit ab2cbeb0ed301a9f0460078e91b09f39958212ef ]

Since scatterlist dimensions are all unsigned ints, in the relatively rare cases where a device's max_segment_size is set to UINT_MAX, then the "cur_len + s_length <= max_len" check in __finalise_sg() will always return true. As a result, the corner case of such a device mapping an excessively large scatterlist which is mergeable to or beyond a total length of 4GB can lead to overflow and a bogus truncated dma_length in the resulting segment.

As we already assume that any single segment must be no longer than max_len to begin with, this can easily be addressed by reshuffling the comparison.

Fixes 809eac54cdd6 ("iommu/dma: Implement scatterlist segment merging")
---
 drivers/iommu/dma-iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iommu/dma-iommu.c +1 -1
index 9d1cebe7f6cbb..c87764a4e2126 100644
@@ -684,7 +684,7 @@ static int __finalise_sg(struct device *dev, struct scatterlist *sg, int nents,
 		 * - and wouldn't make the resulting output segment too long
 		 */
 		if (cur_len && !s_iova_off && (dma_addr & seg_mask) &&
-		    (cur_len + s_length <= max_len)) {
+		    (max_len - cur_len >= s_length)) {
 			/* ...then concatenate it with the previous one */
 			cur_len += s_length;
 		} else {
Signature · 6 lines
2.20.1

_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
author maintainer
#4 lore raw

PATCH 5/12 usb: gadget: composite: Clear "suspended" on reset/disconnect

In reply to Sasha Levin

From: Benjamin Herrenschmidt <[email protected]>

[ Upstream commit 602fda17c7356bb7ae98467d93549057481d11dd ]

In some cases, one can get out of suspend with a reset or a disconnect followed by a reconnect. Previously we would leave a stale suspended flag set.

---
 drivers/usb/gadget/composite.c | 1 +
 1 file changed, 1 insertion(+)
drivers/usb/gadget/composite.c +1 -0
index b805962f51543..75c42393b64ba 100644
@@ -2008,6 +2008,7 @@ void composite_disconnect(struct usb_gadget *gadget)
 	 * disconnect callbacks?
 	 */
 	spin_lock_irqsave(&cdev->lock, flags);
+	cdev->suspended = 0;
 	if (cdev->config)
 		reset_config(cdev);
 	if (cdev->driver->disconnect)
Signature · 1 line
2.20.1
author maintainer
#5 lore raw

PATCH 6/12 usb: gadget: mass_storage: Fix races between fsg_disable and fsg_set_alt

In reply to Sasha Levin

From: Benjamin Herrenschmidt <[email protected]>

[ Upstream commit 4a56a478a525d6427be90753451c40e1327caa1a ]

If fsg_disable() and fsg_set_alt() are called too closely to each other (for example due to a quick reset/reconnect), what can happen is that fsg_set_alt sets common->new_fsg from an interrupt while handle_exception is trying to process the config change caused by fsg_disable():

fsg_disable()
...
handle_exception()
sets state back to FSG_STATE_NORMAL hasn't yet called do_set_interface() or is inside it.

---> interrupt

	fsg_set_alt
		sets common->new_fsg
		queues a new FSG_STATE_CONFIG_CHANGE

<---

Now, the first handle_exception can "see" the updated new_fsg, treats it as if it was a fsg_set_alt() response, call usb_composite_setup_continue() etc...

But then, the thread sees the second FSG_STATE_CONFIG_CHANGE, and goes back down the same path, wipes and reattaches a now active fsg, and .. calls usb_composite_setup_continue() which at this point is wrong.

Not only we get a backtrace, but I suspect the second set_interface wrecks some state causing the host to get upset in my case.

This fixes it by replacing "new_fsg" by a "state argument" (same principle) which is set in the same lock section as the state update, and retrieved similarly.

That way, there is never any discrepancy between the dequeued state and the observed value of it. We keep the ability to have the latest reconfig operation take precedence, but we guarantee that once "dequeued" the argument (new_fsg) will not be clobbered by any new event.

---
 drivers/usb/gadget/function/f_mass_storage.c | 28 +++++++++++++-------
 1 file changed, 18 insertions(+), 10 deletions(-)
drivers/usb/gadget/function/f_mass_storage.c +18 -10
index 25ba303295332..41b5baa1f43b7 100644
@@ -261,7 +261,7 @@ struct fsg_common;
 struct fsg_common {
 	struct usb_gadget	*gadget;
 	struct usb_composite_dev *cdev;
-	struct fsg_dev		*fsg, *new_fsg;
+	struct fsg_dev		*fsg;
 	wait_queue_head_t	io_wait;
 	wait_queue_head_t	fsg_wait;
 
@@ -290,6 +290,7 @@ struct fsg_common {
 	unsigned int		bulk_out_maxpacket;
 	enum fsg_state		state;		/* For exception handling */
 	unsigned int		exception_req_tag;
+	void			*exception_arg;
 
 	enum data_direction	data_dir;
 	u32			data_size;
@@ -393,7 +394,8 @@ static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
 
 /* These routines may be called in process context or in_irq */
 
-static void raise_exception(struct fsg_common *common, enum fsg_state new_state)
+static void __raise_exception(struct fsg_common *common, enum fsg_state new_state,
+			      void *arg)
 {
 	unsigned long		flags;
 
@@ -406,6 +408,7 @@ static void raise_exception(struct fsg_common *common, enum fsg_state new_state)
 	if (common->state <= new_state) {
 		common->exception_req_tag = common->ep0_req_tag;
 		common->state = new_state;
+		common->exception_arg = arg;
 		if (common->thread_task)
 			send_sig_info(SIGUSR1, SEND_SIG_FORCED,
 				      common->thread_task);
@@ -413,6 +416,10 @@ static void raise_exception(struct fsg_common *common, enum fsg_state new_state)
 	spin_unlock_irqrestore(&common->lock, flags);
 }
 
+static void raise_exception(struct fsg_common *common, enum fsg_state new_state)
+{
+	__raise_exception(common, new_state, NULL);
+}
 
 /*-------------------------------------------------------------------------*/
 
@@ -2287,16 +2294,16 @@ static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg)
 static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 {
 	struct fsg_dev *fsg = fsg_from_func(f);
-	fsg->common->new_fsg = fsg;
-	raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
+
+	__raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, fsg);
 	return USB_GADGET_DELAYED_STATUS;
 }
 
 static void fsg_disable(struct usb_function *f)
 {
 	struct fsg_dev *fsg = fsg_from_func(f);
-	fsg->common->new_fsg = NULL;
-	raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
+
+	__raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, NULL);
 }
 
 
@@ -2309,6 +2316,7 @@ static void handle_exception(struct fsg_common *common)
 	enum fsg_state		old_state;
 	struct fsg_lun		*curlun;
 	unsigned int		exception_req_tag;
+	struct fsg_dev		*new_fsg;
 
 	/*
 	 * Clear the existing signals.  Anything but SIGUSR1 is converted
@@ -2362,6 +2370,7 @@ static void handle_exception(struct fsg_common *common)
 	common->next_buffhd_to_fill = &common->buffhds[0];
 	common->next_buffhd_to_drain = &common->buffhds[0];
 	exception_req_tag = common->exception_req_tag;
+	new_fsg = common->exception_arg;
 	old_state = common->state;
 	common->state = FSG_STATE_NORMAL;
 
@@ -2415,8 +2424,8 @@ static void handle_exception(struct fsg_common *common)
 		break;
 
 	case FSG_STATE_CONFIG_CHANGE:
-		do_set_interface(common, common->new_fsg);
-		if (common->new_fsg)
+		do_set_interface(common, new_fsg);
+		if (new_fsg)
 			usb_composite_setup_continue(common->cdev);
 		break;
 
@@ -3007,8 +3016,7 @@ static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
 
 	DBG(fsg, "unbind\n");
 	if (fsg->common->fsg == fsg) {
-		fsg->common->new_fsg = NULL;
-		raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
+		__raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, NULL);
 		/* FIXME: make interruptible or killable somehow? */
 		wait_event(common->fsg_wait, common->fsg != fsg);
 	}
Signature · 1 line
2.20.1
author maintainer
#6 lore raw

PATCH 7/12 xen/blkback: fix memory leaks

In reply to Sasha Levin

From: Wenwen Wang <[email protected]>

[ Upstream commit ae78ca3cf3d9e9f914bfcd0bc5c389ff18b9c2e0 ]

In read_per_ring_refs(), after 'req' and related memory regions are allocated, xen_blkif_map() is invoked to map the shared frame, irq, and etc. However, if this mapping process fails, no cleanup is performed, leading to memory leaks. To fix this issue, invoke the cleanup before returning the error.

---
 drivers/block/xen-blkback/xenbus.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/block/xen-blkback/xenbus.c +3 -3
index 21c1be1eb2260..ed4e807791243 100644
@@ -973,6 +973,7 @@ static int read_per_ring_refs(struct xen_blkif_ring *ring, const char *dir)
 	}
 	blkif->nr_ring_pages = nr_grefs;
 
+	err = -ENOMEM;
 	for (i = 0; i < nr_grefs * XEN_BLKIF_REQS_PER_PAGE; i++) {
 		req = kzalloc(sizeof(*req), GFP_KERNEL);
 		if (!req)
@@ -995,7 +996,7 @@ static int read_per_ring_refs(struct xen_blkif_ring *ring, const char *dir)
 	err = xen_blkif_map(ring, ring_ref, nr_grefs, evtchn);
 	if (err) {
 		xenbus_dev_fatal(dev, err, "mapping ring-ref port %u", evtchn);
-		return err;
+		goto fail;
 	}
 
 	return 0;
@@ -1015,8 +1016,7 @@ static int read_per_ring_refs(struct xen_blkif_ring *ring, const char *dir)
 		}
 		kfree(req);
 	}
-	return -ENOMEM;
-
+	return err;
 }
 
 static int connect_ring(struct backend_info *be)
Signature · 1 line
2.20.1
author maintainer
#7 lore raw

PATCH 8/12 i2c: rcar: avoid race when unregistering slave client

In reply to Sasha Levin

From: Wolfram Sang <[email protected]>

[ Upstream commit 7b814d852af6944657c2961039f404c4490771c0 ]

After we disabled interrupts, there might still be an active one running. Sync before clearing the pointer to the slave device.

Fixes de20d1857dd6 ("i2c: rcar: add slave support")
---
 drivers/i2c/busses/i2c-rcar.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
drivers/i2c/busses/i2c-rcar.c +7 -4
index 3415733a93645..132c4a405bf83 100644
@@ -144,6 +144,7 @@ struct rcar_i2c_priv {
 	enum dma_data_direction dma_direction;
 
 	struct reset_control *rstc;
+	int irq;
 };
 
 #define rcar_i2c_priv_to_dev(p)		((p)->adap.dev.parent)
@@ -813,9 +814,11 @@ static int rcar_unreg_slave(struct i2c_client *slave)
 
 	WARN_ON(!priv->slave);
 
+	/* disable irqs and ensure none is running before clearing ptr */
 	rcar_i2c_write(priv, ICSIER, 0);
 	rcar_i2c_write(priv, ICSCR, 0);
 
+	synchronize_irq(priv->irq);
 	priv->slave = NULL;
 
 	pm_runtime_put(rcar_i2c_priv_to_dev(priv));
@@ -866,7 +869,7 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 	struct i2c_adapter *adap;
 	struct device *dev = &pdev->dev;
 	struct i2c_timings i2c_t;
-	int irq, ret;
+	int ret;
 
 	priv = devm_kzalloc(dev, sizeof(struct rcar_i2c_priv), GFP_KERNEL);
 	if (!priv)
@@ -927,10 +930,10 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 		pm_runtime_put(dev);
 
 
-	irq = platform_get_irq(pdev, 0);
-	ret = devm_request_irq(dev, irq, rcar_i2c_irq, 0, dev_name(dev), priv);
+	priv->irq = platform_get_irq(pdev, 0);
+	ret = devm_request_irq(dev, priv->irq, rcar_i2c_irq, 0, dev_name(dev), priv);
 	if (ret < 0) {
-		dev_err(dev, "cannot get irq %d\n", irq);
+		dev_err(dev, "cannot get irq %d\n", priv->irq);
 		goto out_pm_disable;
 	}
 
Signature · 1 line
2.20.1
author maintainer
#8 lore raw

PATCH 9/12 i2c: emev2: avoid race when unregistering slave client

In reply to Sasha Levin

From: Wolfram Sang <[email protected]>

[ Upstream commit d7437fc0d8291181debe032671a289b6bd93f46f ]

After we disabled interrupts, there might still be an active one running. Sync before clearing the pointer to the slave device.

Fixes c31d0a00021d ("i2c: emev2: add slave support")
---
 drivers/i2c/busses/i2c-emev2.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)
drivers/i2c/busses/i2c-emev2.c +12 -4
index d2e84480fbe96..dd97e5d9f49a2 100644
@@ -72,6 +72,7 @@ struct em_i2c_device {
 	struct completion msg_done;
 	struct clk *sclk;
 	struct i2c_client *slave;
+	int irq;
 };
 
 static inline void em_clear_set_bit(struct em_i2c_device *priv, u8 clear, u8 set, u8 reg)
@@ -342,6 +343,12 @@ static int em_i2c_unreg_slave(struct i2c_client *slave)
 
 	writeb(0, priv->base + I2C_OFS_SVA0);
 
+	/*
+	 * Wait for interrupt to finish. New slave irqs cannot happen because we
+	 * cleared the slave address and, thus, only extension codes will be
+	 * detected which do not use the slave ptr.
+	 */
+	synchronize_irq(priv->irq);
 	priv->slave = NULL;
 
 	return 0;
@@ -358,7 +365,7 @@ static int em_i2c_probe(struct platform_device *pdev)
 {
 	struct em_i2c_device *priv;
 	struct resource *r;
-	int irq, ret;
+	int ret;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -393,8 +400,8 @@ static int em_i2c_probe(struct platform_device *pdev)
 
 	em_i2c_reset(&priv->adap);
 
-	irq = platform_get_irq(pdev, 0);
-	ret = devm_request_irq(&pdev->dev, irq, em_i2c_irq_handler, 0,
+	priv->irq = platform_get_irq(pdev, 0);
+	ret = devm_request_irq(&pdev->dev, priv->irq, em_i2c_irq_handler, 0,
 				"em_i2c", priv);
 	if (ret)
 		goto err_clk;
@@ -404,7 +411,8 @@ static int em_i2c_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_clk;
 
-	dev_info(&pdev->dev, "Added i2c controller %d, irq %d\n", priv->adap.nr, irq);
+	dev_info(&pdev->dev, "Added i2c controller %d, irq %d\n", priv->adap.nr,
+		 priv->irq);
 
 	return 0;
 
Signature · 1 line
2.20.1
author maintainer
#9 lore raw

PATCH 10/12 drm/ast: Fixed reboot test may cause system hanged

In reply to Sasha Levin

From: "Y.C. Chen" <[email protected]>

[ Upstream commit 05b439711f6ff8700e8660f97a1179650778b9cb ]

There is another thread still access standard VGA I/O while loading drm driver. Disable standard VGA I/O decode to avoid this issue.

---
 drivers/gpu/drm/ast/ast_main.c | 5 ++++-
 drivers/gpu/drm/ast/ast_mode.c | 2 +-
 drivers/gpu/drm/ast/ast_post.c | 2 +-
 3 files changed, 6 insertions(+), 3 deletions(-)
drivers/gpu/drm/ast/ast_main.c +4 -1
index 373700c05a00f..224fa1ef87ff9 100644
@@ -131,8 +131,8 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
 
 
 	/* Enable extended register access */
-	ast_enable_mmio(dev);
 	ast_open_key(ast);
+	ast_enable_mmio(dev);
 
 	/* Find out whether P2A works or whether to use device-tree */
 	ast_detect_config_mode(dev, &scu_rev);
@@ -576,6 +576,9 @@ void ast_driver_unload(struct drm_device *dev)
 {
 	struct ast_private *ast = dev->dev_private;
 
+	/* enable standard VGA decode */
+	ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa1, 0x04);
+
 	ast_release_firmware(dev);
 	kfree(ast->dp501_fw_addr);
 	ast_mode_fini(dev);
drivers/gpu/drm/ast/ast_mode.c +1 -1
index 343867b182dd8..a09fafa270822 100644
@@ -600,7 +600,7 @@ static int ast_crtc_mode_set(struct drm_crtc *crtc,
 		return -EINVAL;
 	ast_open_key(ast);
 
-	ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa1, 0xff, 0x04);
+	ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa1, 0x06);
 
 	ast_set_std_reg(crtc, adjusted_mode, &vbios_mode);
 	ast_set_crtc_reg(crtc, adjusted_mode, &vbios_mode);
drivers/gpu/drm/ast/ast_post.c +1 -1
index f7d421359d564..c1d1ac51d1c20 100644
@@ -46,7 +46,7 @@ void ast_enable_mmio(struct drm_device *dev)
 {
 	struct ast_private *ast = dev->dev_private;
 
-	ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa1, 0xff, 0x04);
+	ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa1, 0x06);
 }
 
 
Signature · 6 lines
2.20.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#10 lore raw

PATCH 11/12 usb: host: fotg2: restart hcd after port reset

In reply to Sasha Levin

From: Hans Ulli Kroll <[email protected]>

[ Upstream commit 777758888ffe59ef754cc39ab2f275dc277732f4 ]

On the Gemini SoC the FOTG2 stalls after port reset so restart the HCD after each port reset.

---
 drivers/usb/host/fotg210-hcd.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/usb/host/fotg210-hcd.c +4 -0
index 457cc6525abd6..aa21036828084 100644
@@ -1652,6 +1652,10 @@ static int fotg210_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			/* see what we found out */
 			temp = check_reset_complete(fotg210, wIndex, status_reg,
 					fotg210_readl(fotg210, status_reg));
+
+			/* restart schedule */
+			fotg210->command |= CMD_RUN;
+			fotg210_writel(fotg210, fotg210->command, &fotg210->regs->command);
 		}
 
 		if (!(temp & (PORT_RESUME|PORT_RESET))) {
Signature · 1 line
2.20.1
author maintainer
#11 lore raw

PATCH 12/12 tools: hv: fix KVP and VSS daemons exit code

In reply to Sasha Levin

From: Adrian Vladu <[email protected]>

[ Upstream commit b0995156071b0ff29a5902964a9dc8cfad6f81c0 ]

HyperV KVP and VSS daemons should exit with 0 when the '--help' or '-h' flags are used.

Cc "K. Y. Srinivasan" <[email protected]>
Cc Haiyang Zhang <[email protected]>
Cc Stephen Hemminger <[email protected]>
Cc Sasha Levin <[email protected]>
Cc Alessandro Pilotti <[email protected]>
---
 tools/hv/hv_kvp_daemon.c | 2 ++
 tools/hv/hv_vss_daemon.c | 2 ++
 2 files changed, 4 insertions(+)
tools/hv/hv_kvp_daemon.c +2 -0
index 62c9a503ae052..0ef215061fb50 100644
@@ -1380,6 +1380,8 @@ int main(int argc, char *argv[])
 			daemonize = 0;
 			break;
 		case 'h':
+			print_usage(argv);
+			exit(0);
 		default:
 			print_usage(argv);
 			exit(EXIT_FAILURE);
tools/hv/hv_vss_daemon.c +2 -0
index 34031a297f024..514d29966ac67 100644
@@ -172,6 +172,8 @@ int main(int argc, char *argv[])
 			daemonize = 0;
 			break;
 		case 'h':
+			print_usage(argv);
+			exit(0);
 		default:
 			print_usage(argv);
 			exit(EXIT_FAILURE);
Signature · 1 line
2.20.1