Skip to contentSkip to conversation

QorIQ TMU multi-sensor and HWMON support

PATCH RESEND Superseded Andrey Smirnov 1 participant 13 messages Aug 21, 2019 Thermal

v6 of 8 Superseded Latest is v8 →

lore
Share & tools
lore
#0 lore raw

v6 cover QorIQ TMU multi-sensor and HWMON support

Everyone:

This series contains patches adding support for HWMON integration, bug fixes and general improvements (hopefully) for TMU driver I made while working on it on i.MX8MQ.

Feedback is welcome!

Thanks,
Andrey Smirnov

Changes since [v5]

- Rebased on recent linux-next, dropped "thermal: qoriq: Remove unnecessary DT node is NULL check" since it is already in the tree

- Dropped dependency on [rfc]

Changes since [v4]

- Collected Tested-by from Lucas

- Collected Reviewed-by from Daniel

- Converted "thermal: qoriq: Enable all sensors before registering them" to use if instead of switch statement for error checking

Changes since [v3]

- Series reabse on top of [rfc]

- Fixed incorrect goto label in "thermal: qoriq: Pass data to qoriq_tmu_calibration()"

- Added REGS_TRITSR() register description to "thermal: qoriq: Do not report invalid temperature reading"

- Reworded commit message of "thermal: qoriq: Remove unnecessary DT node is NULL check"

Changes since [v2]

- Patches rebased on v5.1-rc1

Changes since [v1]

- Rebased on "linus" branch of git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git that included latest chagnes adding multi-sensors support

- Dropped

thermal: qoriq: Add support for multiple thremal sites
thermal: qoriq: Be more strict when parsing
thermal: qoriq: Simplify error handling in qoriq_tmu_get_sensor_id()

since they are no longer relevant

- Added

thermal: qoriq: Don't store struct thermal_zone_device reference
thermal: qoriq: Add local struct qoriq_sensor pointer
thermal: qoriq: Embed per-sensor data into struct qoriq_tmu_data
thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly

to simplify latest codebase

- Changed "thermal: qoriq: Do not report invalid temperature reading" to use regmap_read_poll_timeout() to make sure that tmu_get_temp() waits for fist sample to be ready before reporting it. This case is triggered on my setup if qoriq_thermal is compiled as a module

[v1] lore.kernel.org/lkml/[email protected] [v2] lore.kernel.org/lkml/[email protected] [v3] lore.kernel.org/lkml/[email protected] [v4] lore.kernel.org/lkml/[email protected] [v5] lore.kernel.org/lkml/[email protected] [rfc] lore.kernel.org/lkml/[email protected]

Andrey Smirnov (12):
thermal: qoriq: Add local struct device pointer
thermal: qoriq: Don't store struct thermal_zone_device reference
thermal: qoriq: Add local struct qoriq_sensor pointer
thermal: qoriq: Embed per-sensor data into struct qoriq_tmu_data
thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly
thermal: qoriq: Pass data to qoriq_tmu_calibration() directly
thermal: qoriq: Convert driver to use devm_ioremap()
thermal: qoriq: Convert driver to use regmap API
thermal: qoriq: Enable all sensors before registering them
thermal: qoriq: Do not report invalid temperature reading
thermal_hwmon: Add devres wrapper for thermal_add_hwmon_sysfs()
thermal: qoriq: Add hwmon support

 drivers/thermal/qoriq_thermal.c | 272 ++++++++++++++++----------------
 drivers/thermal/thermal_hwmon.c |  28 ++++
 drivers/thermal/thermal_hwmon.h |   7 +
 3 files changed, 175 insertions(+), 132 deletions(-)
Signature · 1 line
2.21.0
#1 lore raw

PATCH RESEND v6 1/12 thermal: qoriq: Add local struct device pointer

Use a local "struct device *dev" for brevity. No functional change intended.

---
 drivers/thermal/qoriq_thermal.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/thermal/qoriq_thermal.c +4 -3
index 7b364933bfb1..91f9f49d2776 100644
@@ -192,8 +192,9 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
 	int ret;
 	struct qoriq_tmu_data *data;
 	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
 
-	data = devm_kzalloc(&pdev->dev, sizeof(struct qoriq_tmu_data),
+	data = devm_kzalloc(dev, sizeof(struct qoriq_tmu_data),
 			    GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
@@ -204,7 +205,7 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
 
 	data->regs = of_iomap(np, 0);
 	if (!data->regs) {
-		dev_err(&pdev->dev, "Failed to get memory region\n");
+		dev_err(dev, "Failed to get memory region\n");
 		ret = -ENODEV;
 		goto err_iomap;
 	}
@@ -217,7 +218,7 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
 
 	ret = qoriq_tmu_register_tmu_zone(pdev);
 	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to register sensors\n");
+		dev_err(dev, "Failed to register sensors\n");
 		ret = -ENODEV;
 		goto err_iomap;
 	}
Signature · 1 line
2.21.0
#2 lore raw

PATCH RESEND v6 2/12 thermal: qoriq: Don't store struct thermal_zone_device reference

In reply to Andrey Smirnov

Struct thermal_zone_device reference stored as sensor's private data isn't really used anywhere in the code. Drop it.

---
 drivers/thermal/qoriq_thermal.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)
drivers/thermal/qoriq_thermal.c +9 -6
index 91f9f49d2776..6d40b9788266 100644
@@ -65,7 +65,6 @@ struct qoriq_tmu_data;
  * Thermal zone data
  */
 struct qoriq_sensor {
-	struct thermal_zone_device	*tzd;
 	struct qoriq_tmu_data		*qdata;
 	int				id;
 };
@@ -114,6 +113,8 @@ static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)
 	int id, sites = 0;
 
 	for (id = 0; id < SITES_MAX; id++) {
+		struct thermal_zone_device *tzd;
+
 		qdata->sensor[id] = devm_kzalloc(&pdev->dev,
 				sizeof(struct qoriq_sensor), GFP_KERNEL);
 		if (!qdata->sensor[id])
@@ -121,13 +122,15 @@ static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)
 
 		qdata->sensor[id]->id = id;
 		qdata->sensor[id]->qdata = qdata;
-		qdata->sensor[id]->tzd = devm_thermal_zone_of_sensor_register(
-				&pdev->dev, id, qdata->sensor[id], &tmu_tz_ops);
-		if (IS_ERR(qdata->sensor[id]->tzd)) {
-			if (PTR_ERR(qdata->sensor[id]->tzd) == -ENODEV)
+
+		tzd = devm_thermal_zone_of_sensor_register(&pdev->dev, id,
+							   qdata->sensor[id],
+							   &tmu_tz_ops);
+		if (IS_ERR(tzd)) {
+			if (PTR_ERR(tzd) == -ENODEV)
 				continue;
 			else
-				return PTR_ERR(qdata->sensor[id]->tzd);
+				return PTR_ERR(tzd);
 		}
 
 		sites |= 0x1 << (15 - id);
Signature · 1 line
2.21.0
#3 lore raw

PATCH RESEND v6 3/12 thermal: qoriq: Add local struct qoriq_sensor pointer

In reply to Andrey Smirnov

Add local struct qoriq_sensor pointer in qoriq_tmu_register_tmu_zone() for brevity.

Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
Cc Zhang Rui <[email protected]>
Cc Eduardo Valentin <[email protected]>
Cc Daniel Lezcano <[email protected]>
Cc Angus Ainslie (Purism) <[email protected]>
---
 drivers/thermal/qoriq_thermal.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)
drivers/thermal/qoriq_thermal.c +9 -5
index 6d40b9788266..d74c6c494f77 100644
@@ -114,17 +114,21 @@ static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)
 
 	for (id = 0; id < SITES_MAX; id++) {
 		struct thermal_zone_device *tzd;
+		struct qoriq_sensor *sensor;
 
-		qdata->sensor[id] = devm_kzalloc(&pdev->dev,
-				sizeof(struct qoriq_sensor), GFP_KERNEL);
+		sensor = devm_kzalloc(&pdev->dev,
+				      sizeof(struct qoriq_sensor),
+				      GFP_KERNEL);
 		if (!qdata->sensor[id])
 			return -ENOMEM;
 
-		qdata->sensor[id]->id = id;
-		qdata->sensor[id]->qdata = qdata;
+		qdata->sensor[id] = sensor;
+
+		sensor->id = id;
+		sensor->qdata = qdata;
 
 		tzd = devm_thermal_zone_of_sensor_register(&pdev->dev, id,
-							   qdata->sensor[id],
+							   sensor,
 							   &tmu_tz_ops);
 		if (IS_ERR(tzd)) {
 			if (PTR_ERR(tzd) == -ENODEV)
Signature · 1 line
2.21.0
#4 lore raw

PATCH RESEND v6 4/12 thermal: qoriq: Embed per-sensor data into struct qoriq_tmu_data

In reply to Andrey Smirnov

Embed per-sensor data into struct qoriq_tmu_data so we can drop the code allocating it. This also allows us to get rid of per-sensor back reference to struct qoriq_tmu_data since now its address can be caluclated using container_of().

Cc Chris Healy <[email protected]>
Cc Lucas Stach <[email protected]>
Cc Zhang Rui <[email protected]>
Cc Eduardo Valentin <[email protected]>
Cc Daniel Lezcano <[email protected]>
Cc Angus Ainslie (Purism) <[email protected]>
---
 drivers/thermal/qoriq_thermal.c | 23 ++++++++---------------
 1 file changed, 8 insertions(+), 15 deletions(-)
drivers/thermal/qoriq_thermal.c +8 -15
index d74c6c494f77..4d5c74173f08 100644
@@ -59,22 +59,24 @@ struct qoriq_tmu_regs {
 	u32 ttr3cr;		/* Temperature Range 3 Control Register */
 };
 
-struct qoriq_tmu_data;
-
 /*
  * Thermal zone data
  */
 struct qoriq_sensor {
-	struct qoriq_tmu_data		*qdata;
 	int				id;
 };
 
 struct qoriq_tmu_data {
 	struct qoriq_tmu_regs __iomem *regs;
 	bool little_endian;
-	struct qoriq_sensor	*sensor[SITES_MAX];
+	struct qoriq_sensor	sensor[SITES_MAX];
 };
 
+static struct qoriq_tmu_data *qoriq_sensor_to_data(struct qoriq_sensor *s)
+{
+	return container_of(s, struct qoriq_tmu_data, sensor[s->id]);
+}
+
 static void tmu_write(struct qoriq_tmu_data *p, u32 val, void __iomem *addr)
 {
 	if (p->little_endian)
@@ -94,7 +96,7 @@ static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr)
 static int tmu_get_temp(void *p, int *temp)
 {
 	struct qoriq_sensor *qsensor = p;
-	struct qoriq_tmu_data *qdata = qsensor->qdata;
+	struct qoriq_tmu_data *qdata = qoriq_sensor_to_data(qsensor);
 	u32 val;
 
 	val = tmu_read(qdata, &qdata->regs->site[qsensor->id].tritsr);
@@ -114,18 +116,9 @@ static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)
 
 	for (id = 0; id < SITES_MAX; id++) {
 		struct thermal_zone_device *tzd;
-		struct qoriq_sensor *sensor;
-
-		sensor = devm_kzalloc(&pdev->dev,
-				      sizeof(struct qoriq_sensor),
-				      GFP_KERNEL);
-		if (!qdata->sensor[id])
-			return -ENOMEM;
-
-		qdata->sensor[id] = sensor;
+		struct qoriq_sensor *sensor = &qdata->sensor[id];
 
 		sensor->id = id;
-		sensor->qdata = qdata;
 
 		tzd = devm_thermal_zone_of_sensor_register(&pdev->dev, id,
 							   sensor,
Signature · 1 line
2.21.0
#5 lore raw

PATCH RESEND v6 5/12 thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly

In reply to Andrey Smirnov

Pass all necessary data to qoriq_tmu_register_tmu_zone() directly instead of passing a paltform device and then deriving it. This is done as a first step to simplify resource deallocation code.

---
 drivers/thermal/qoriq_thermal.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/thermal/qoriq_thermal.c +4 -4
index 4d5c74173f08..61700881d9f0 100644
@@ -109,9 +109,9 @@ static const struct thermal_zone_of_device_ops tmu_tz_ops = {
 	.get_temp = tmu_get_temp,
 };
 
-static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)
+static int qoriq_tmu_register_tmu_zone(struct device *dev,
+				       struct qoriq_tmu_data *qdata)
 {
-	struct qoriq_tmu_data *qdata = platform_get_drvdata(pdev);
 	int id, sites = 0;
 
 	for (id = 0; id < SITES_MAX; id++) {
@@ -120,7 +120,7 @@ static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)
 
 		sensor->id = id;
 
-		tzd = devm_thermal_zone_of_sensor_register(&pdev->dev, id,
+		tzd = devm_thermal_zone_of_sensor_register(dev, id,
 							   sensor,
 							   &tmu_tz_ops);
 		if (IS_ERR(tzd)) {
@@ -216,7 +216,7 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto err_tmu;
 
-	ret = qoriq_tmu_register_tmu_zone(pdev);
+	ret = qoriq_tmu_register_tmu_zone(dev, data);
 	if (ret < 0) {
 		dev_err(dev, "Failed to register sensors\n");
 		ret = -ENODEV;
Signature · 1 line
2.21.0
#6 lore raw

PATCH RESEND v6 6/12 thermal: qoriq: Pass data to qoriq_tmu_calibration() directly

In reply to Andrey Smirnov

We can simplify error cleanup code if instead of passing a "struct platform_device *" to qoriq_tmu_calibration() and deriving a bunch of pointers from it, we pass those pointers directly. This way we won't be force to call platform_set_drvdata() as early in qoriq_tmu_probe() and consequently would be able to drop the "err_iomap" error path.

---
 drivers/thermal/qoriq_thermal.c | 24 ++++++++++--------------
 1 file changed, 10 insertions(+), 14 deletions(-)
drivers/thermal/qoriq_thermal.c +10 -14
index 61700881d9f0..62d7a0efb837 100644
@@ -140,16 +140,16 @@ static int qoriq_tmu_register_tmu_zone(struct device *dev,
 	return 0;
 }
 
-static int qoriq_tmu_calibration(struct platform_device *pdev)
+static int qoriq_tmu_calibration(struct device *dev,
+				 struct qoriq_tmu_data *data)
 {
 	int i, val, len;
 	u32 range[4];
 	const u32 *calibration;
-	struct device_node *np = pdev->dev.of_node;
-	struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
+	struct device_node *np = dev->of_node;
 
 	if (of_property_read_u32_array(np, "fsl,tmu-range", range, 4)) {
-		dev_err(&pdev->dev, "missing calibration range.\n");
+		dev_err(dev, "missing calibration range.\n");
 		return -ENODEV;
 	}
 
@@ -161,7 +161,7 @@ static int qoriq_tmu_calibration(struct platform_device *pdev)
 
 	calibration = of_get_property(np, "fsl,tmu-calibration", &len);
 	if (calibration == NULL || len % 8) {
-		dev_err(&pdev->dev, "invalid calibration data.\n");
+		dev_err(dev, "invalid calibration data.\n");
 		return -ENODEV;
 	}
 
@@ -199,20 +199,17 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
 	if (!data)
 		return -ENOMEM;
 
-	platform_set_drvdata(pdev, data);
-
 	data->little_endian = of_property_read_bool(np, "little-endian");
 
 	data->regs = of_iomap(np, 0);
 	if (!data->regs) {
 		dev_err(dev, "Failed to get memory region\n");
-		ret = -ENODEV;
-		goto err_iomap;
+		return -ENODEV;
 	}
 
 	qoriq_tmu_init_device(data);	/* TMU initialization */
 
-	ret = qoriq_tmu_calibration(pdev);	/* TMU calibration */
+	ret = qoriq_tmu_calibration(dev, data);	/* TMU calibration */
 	if (ret < 0)
 		goto err_tmu;
 
@@ -220,17 +217,16 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
 	if (ret < 0) {
 		dev_err(dev, "Failed to register sensors\n");
 		ret = -ENODEV;
-		goto err_iomap;
+		goto err_tmu;
 	}
 
+	platform_set_drvdata(pdev, data);
+
 	return 0;
 
 err_tmu:
 	iounmap(data->regs);
 
-err_iomap:
-	platform_set_drvdata(pdev, NULL);
-
 	return ret;
 }
 
Signature · 1 line
2.21.0
#7 lore raw

PATCH RESEND v6 7/12 thermal: qoriq: Convert driver to use devm_ioremap()

In reply to Andrey Smirnov

Convert driver to use devm_ioremap() to simplify memory deallocation and error handling code. No functional change intended.

---
 drivers/thermal/qoriq_thermal.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
drivers/thermal/qoriq_thermal.c +10 -10
index 62d7a0efb837..80fe9adcc313 100644
@@ -193,6 +193,7 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
 	struct qoriq_tmu_data *data;
 	struct device_node *np = pdev->dev.of_node;
 	struct device *dev = &pdev->dev;
+	struct resource *io;
 
 	data = devm_kzalloc(dev, sizeof(struct qoriq_tmu_data),
 			    GFP_KERNEL);
@@ -201,7 +202,13 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
 
 	data->little_endian = of_property_read_bool(np, "little-endian");
 
-	data->regs = of_iomap(np, 0);
+	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!io) {
+		dev_err(dev, "Failed to get memory region\n");
+		return -ENODEV;
+	}
+
+	data->regs = devm_ioremap(dev, io->start, resource_size(io));
 	if (!data->regs) {
 		dev_err(dev, "Failed to get memory region\n");
 		return -ENODEV;
@@ -211,23 +218,17 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
 
 	ret = qoriq_tmu_calibration(dev, data);	/* TMU calibration */
 	if (ret < 0)
-		goto err_tmu;
+		return ret;
 
 	ret = qoriq_tmu_register_tmu_zone(dev, data);
 	if (ret < 0) {
 		dev_err(dev, "Failed to register sensors\n");
-		ret = -ENODEV;
-		goto err_tmu;
+		return -ENODEV;
 	}
 
 	platform_set_drvdata(pdev, data);
 
 	return 0;
-
-err_tmu:
-	iounmap(data->regs);
-
-	return ret;
 }
 
 static int qoriq_tmu_remove(struct platform_device *pdev)
@@ -237,7 +238,6 @@ static int qoriq_tmu_remove(struct platform_device *pdev)
 	/* Disable monitoring */
 	tmu_write(data, TMR_DISABLE, &data->regs->tmr);
 
-	iounmap(data->regs);
 	platform_set_drvdata(pdev, NULL);
 
 	return 0;
Signature · 1 line
2.21.0
#8 lore raw

PATCH RESEND v6 8/12 thermal: qoriq: Convert driver to use regmap API

In reply to Andrey Smirnov

Convert driver to use regmap API, drop custom LE/BE IO helpers and simplify bit manipulation using regmap_update_bits(). This also allows us to convert some register initialization to use loops and adds convenient debug access to TMU registers via debugfs.

---
 drivers/thermal/qoriq_thermal.c | 159 +++++++++++++++-----------------
 1 file changed, 74 insertions(+), 85 deletions(-)
drivers/thermal/qoriq_thermal.c +74 -85
index 80fe9adcc313..08167ebe6060 100644
@@ -8,6 +8,7 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/regmap.h>
 #include <linux/thermal.h>
 
 #include "thermal_core.h"
@@ -17,48 +18,27 @@
 /*
  * QorIQ TMU Registers
  */
-struct qoriq_tmu_site_regs {
-	u32 tritsr;		/* Immediate Temperature Site Register */
-	u32 tratsr;		/* Average Temperature Site Register */
-	u8 res0[0x8];
-};
 
-struct qoriq_tmu_regs {
-	u32 tmr;		/* Mode Register */
+#define REGS_TMR	0x000	/* Mode Register */
 #define TMR_DISABLE	0x0
 #define TMR_ME		0x80000000
 #define TMR_ALPF	0x0c000000
-	u32 tsr;		/* Status Register */
-	u32 tmtmir;		/* Temperature measurement interval Register */
+
+#define REGS_TMTMIR	0x008	/* Temperature measurement interval Register */
 #define TMTMIR_DEFAULT	0x0000000f
-	u8 res0[0x14];
-	u32 tier;		/* Interrupt Enable Register */
+
+#define REGS_TIER	0x020	/* Interrupt Enable Register */
 #define TIER_DISABLE	0x0
-	u32 tidr;		/* Interrupt Detect Register */
-	u32 tiscr;		/* Interrupt Site Capture Register */
-	u32 ticscr;		/* Interrupt Critical Site Capture Register */
-	u8 res1[0x10];
-	u32 tmhtcrh;		/* High Temperature Capture Register */
-	u32 tmhtcrl;		/* Low Temperature Capture Register */
-	u8 res2[0x8];
-	u32 tmhtitr;		/* High Temperature Immediate Threshold */
-	u32 tmhtatr;		/* High Temperature Average Threshold */
-	u32 tmhtactr;	/* High Temperature Average Crit Threshold */
-	u8 res3[0x24];
-	u32 ttcfgr;		/* Temperature Configuration Register */
-	u32 tscfgr;		/* Sensor Configuration Register */
-	u8 res4[0x78];
-	struct qoriq_tmu_site_regs site[SITES_MAX];
-	u8 res5[0x9f8];
-	u32 ipbrr0;		/* IP Block Revision Register 0 */
-	u32 ipbrr1;		/* IP Block Revision Register 1 */
-	u8 res6[0x310];
-	u32 ttr0cr;		/* Temperature Range 0 Control Register */
-	u32 ttr1cr;		/* Temperature Range 1 Control Register */
-	u32 ttr2cr;		/* Temperature Range 2 Control Register */
-	u32 ttr3cr;		/* Temperature Range 3 Control Register */
-};
 
+#define REGS_TTCFGR	0x080	/* Temperature Configuration Register */
+#define REGS_TSCFGR	0x084	/* Sensor Configuration Register */
+
+#define REGS_TRITSR(n)	(0x100 + 16 * (n)) /* Immediate Temperature
+					    * Site Register
+					    */
+#define REGS_TTRnCR(n)	(0xf10 + 4 * (n)) /* Temperature Range n
+					   * Control Register
+					   */
 /*
  * Thermal zone data
  */
@@ -67,8 +47,7 @@ struct qoriq_sensor {
 };
 
 struct qoriq_tmu_data {
-	struct qoriq_tmu_regs __iomem *regs;
-	bool little_endian;
+	struct regmap *regmap;
 	struct qoriq_sensor	sensor[SITES_MAX];
 };
 
@@ -77,29 +56,13 @@ static struct qoriq_tmu_data *qoriq_sensor_to_data(struct qoriq_sensor *s)
 	return container_of(s, struct qoriq_tmu_data, sensor[s->id]);
 }
 
-static void tmu_write(struct qoriq_tmu_data *p, u32 val, void __iomem *addr)
-{
-	if (p->little_endian)
-		iowrite32(val, addr);
-	else
-		iowrite32be(val, addr);
-}
-
-static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr)
-{
-	if (p->little_endian)
-		return ioread32(addr);
-	else
-		return ioread32be(addr);
-}
-
 static int tmu_get_temp(void *p, int *temp)
 {
 	struct qoriq_sensor *qsensor = p;
 	struct qoriq_tmu_data *qdata = qoriq_sensor_to_data(qsensor);
 	u32 val;
 
-	val = tmu_read(qdata, &qdata->regs->site[qsensor->id].tritsr);
+	regmap_read(qdata->regmap, REGS_TRITSR(qsensor->id), &val);
 	*temp = (val & 0xff) * 1000;
 
 	return 0;
@@ -135,7 +98,8 @@ static int qoriq_tmu_register_tmu_zone(struct device *dev,
 
 	/* Enable monitoring */
 	if (sites != 0)
-		tmu_write(qdata, sites | TMR_ME | TMR_ALPF, &qdata->regs->tmr);
+		regmap_write(qdata->regmap, REGS_TMR,
+			     sites | TMR_ME | TMR_ALPF);
 
 	return 0;
 }
@@ -154,10 +118,8 @@ static int qoriq_tmu_calibration(struct device *dev,
 	}
 
 	/* Init temperature range registers */
-	tmu_write(data, range[0], &data->regs->ttr0cr);
-	tmu_write(data, range[1], &data->regs->ttr1cr);
-	tmu_write(data, range[2], &data->regs->ttr2cr);
-	tmu_write(data, range[3], &data->regs->ttr3cr);
+	for (i = 0; i < ARRAY_SIZE(range); i++)
+		regmap_write(data->regmap, REGS_TTRnCR(i), range[i]);
 
 	calibration = of_get_property(np, "fsl,tmu-calibration", &len);
 	if (calibration == NULL || len % 8) {
@@ -167,9 +129,9 @@ static int qoriq_tmu_calibration(struct device *dev,
 
 	for (i = 0; i < len; i += 8, calibration += 2) {
 		val = of_read_number(calibration, 1);
-		tmu_write(data, val, &data->regs->ttcfgr);
+		regmap_write(data->regmap, REGS_TTCFGR, val);
 		val = of_read_number(calibration + 1, 1);
-		tmu_write(data, val, &data->regs->tscfgr);
+		regmap_write(data->regmap, REGS_TSCFGR, val);
 	}
 
 	return 0;
@@ -178,15 +140,32 @@ static int qoriq_tmu_calibration(struct device *dev,
 static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
 {
 	/* Disable interrupt, using polling instead */
-	tmu_write(data, TIER_DISABLE, &data->regs->tier);
+	regmap_write(data->regmap, REGS_TIER, TIER_DISABLE);
 
 	/* Set update_interval */
-	tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir);
+	regmap_write(data->regmap, REGS_TMTMIR, TMTMIR_DEFAULT);
 
 	/* Disable monitoring */
-	tmu_write(data, TMR_DISABLE, &data->regs->tmr);
+	regmap_write(data->regmap, REGS_TMR, TMR_DISABLE);
 }
 
+static const struct regmap_range qoriq_yes_ranges[] = {
+	regmap_reg_range(REGS_TMR, REGS_TSCFGR),
+	regmap_reg_range(REGS_TTRnCR(0), REGS_TTRnCR(3)),
+	/* Read only registers below */
+	regmap_reg_range(REGS_TRITSR(0), REGS_TRITSR(15)),
+};
+
+static const struct regmap_access_table qoriq_wr_table = {
+	.yes_ranges	= qoriq_yes_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(qoriq_yes_ranges) - 1,
+};
+
+static const struct regmap_access_table qoriq_rd_table = {
+	.yes_ranges	= qoriq_yes_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(qoriq_yes_ranges),
+};
+
 static int qoriq_tmu_probe(struct platform_device *pdev)
 {
 	int ret;
@@ -194,26 +173,44 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	struct device *dev = &pdev->dev;
 	struct resource *io;
+	const bool little_endian = of_property_read_bool(np, "little-endian");
+	const enum regmap_endian format_endian =
+		little_endian ? REGMAP_ENDIAN_LITTLE : REGMAP_ENDIAN_BIG;
+	const struct regmap_config regmap_config = {
+		.reg_bits		= 32,
+		.val_bits		= 32,
+		.reg_stride		= 4,
+		.rd_table		= &qoriq_rd_table,
+		.wr_table		= &qoriq_wr_table,
+		.val_format_endian	= format_endian,
+		.max_register		= SZ_4K,
+	};
+	void __iomem *base;
 
 	data = devm_kzalloc(dev, sizeof(struct qoriq_tmu_data),
 			    GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-	data->little_endian = of_property_read_bool(np, "little-endian");
-
 	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!io) {
 		dev_err(dev, "Failed to get memory region\n");
 		return -ENODEV;
 	}
 
-	data->regs = devm_ioremap(dev, io->start, resource_size(io));
-	if (!data->regs) {
+	base = devm_ioremap(dev, io->start, resource_size(io));
+	if (!base) {
 		dev_err(dev, "Failed to get memory region\n");
 		return -ENODEV;
 	}
 
+	data->regmap = devm_regmap_init_mmio(dev, base, &regmap_config);
+	if (IS_ERR(data->regmap)) {
+		ret = PTR_ERR(data->regmap);
+		dev_err(dev, "Failed to init regmap (%d)\n", ret);
+		return ret;
+	}
+
 	qoriq_tmu_init_device(data);	/* TMU initialization */
 
 	ret = qoriq_tmu_calibration(dev, data);	/* TMU calibration */
@@ -236,7 +233,7 @@ static int qoriq_tmu_remove(struct platform_device *pdev)
 	struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
 
 	/* Disable monitoring */
-	tmu_write(data, TMR_DISABLE, &data->regs->tmr);
+	regmap_write(data->regmap, REGS_TMR, TMR_DISABLE);
 
 	platform_set_drvdata(pdev, NULL);
 
@@ -244,30 +241,22 @@ static int qoriq_tmu_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM_SLEEP
-static int qoriq_tmu_suspend(struct device *dev)
+
+static int qoriq_tmu_suspend_resume(struct device *dev, unsigned int val)
 {
-	u32 tmr;
 	struct qoriq_tmu_data *data = dev_get_drvdata(dev);
 
-	/* Disable monitoring */
-	tmr = tmu_read(data, &data->regs->tmr);
-	tmr &= ~TMR_ME;
-	tmu_write(data, tmr, &data->regs->tmr);
+	return regmap_update_bits(data->regmap, REGS_TMR, TMR_ME, val);
+}
 
-	return 0;
+static int qoriq_tmu_suspend(struct device *dev)
+{
+	return qoriq_tmu_suspend_resume(dev, 0);
 }
 
 static int qoriq_tmu_resume(struct device *dev)
 {
-	u32 tmr;
-	struct qoriq_tmu_data *data = dev_get_drvdata(dev);
-
-	/* Enable monitoring */
-	tmr = tmu_read(data, &data->regs->tmr);
-	tmr |= TMR_ME;
-	tmu_write(data, tmr, &data->regs->tmr);
-
-	return 0;
+	return qoriq_tmu_suspend_resume(dev, TMR_ME);
 }
 #endif
 
Signature · 1 line
2.21.0
#9 lore raw

PATCH RESEND v6 9/12 thermal: qoriq: Enable all sensors before registering them

In reply to Andrey Smirnov

Tmu_get_temp will get called as a part of sensor registration via devm_thermal_zone_of_sensor_register(). To prevent it from retruning bogus data we need to enable sensor monitoring before that. Looking at the datasheet (i.MX8MQ RM) there doesn't seem to be any harm in enabling them all, so, for the sake of simplicity, change the code to do just that.

---
 drivers/thermal/qoriq_thermal.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)
drivers/thermal/qoriq_thermal.c +11 -12
index 08167ebe6060..5f964f806187 100644
@@ -23,6 +23,7 @@
 #define TMR_DISABLE	0x0
 #define TMR_ME		0x80000000
 #define TMR_ALPF	0x0c000000
+#define TMR_MSITE_ALL	GENMASK(15, 0)
 
 #define REGS_TMTMIR	0x008	/* Temperature measurement interval Register */
 #define TMTMIR_DEFAULT	0x0000000f
@@ -75,7 +76,10 @@ static const struct thermal_zone_of_device_ops tmu_tz_ops = {
 static int qoriq_tmu_register_tmu_zone(struct device *dev,
 				       struct qoriq_tmu_data *qdata)
 {
-	int id, sites = 0;
+	int id, ret;
+
+	regmap_write(qdata->regmap, REGS_TMR,
+		     TMR_MSITE_ALL | TMR_ME | TMR_ALPF);
 
 	for (id = 0; id < SITES_MAX; id++) {
 		struct thermal_zone_device *tzd;
@@ -86,21 +90,16 @@ static int qoriq_tmu_register_tmu_zone(struct device *dev,
 		tzd = devm_thermal_zone_of_sensor_register(dev, id,
 							   sensor,
 							   &tmu_tz_ops);
-		if (IS_ERR(tzd)) {
-			if (PTR_ERR(tzd) == -ENODEV)
+		ret = PTR_ERR_OR_ZERO(tzd);
+		if (ret) {
+			if (ret == -ENODEV)
 				continue;
-			else
-				return PTR_ERR(tzd);
-		}
 
-		sites |= 0x1 << (15 - id);
+			regmap_write(qdata->regmap, REGS_TMR, TMR_DISABLE);
+			return ret;
+		}
 	}
 
-	/* Enable monitoring */
-	if (sites != 0)
-		regmap_write(qdata->regmap, REGS_TMR,
-			     sites | TMR_ME | TMR_ALPF);
-
 	return 0;
 }
 
Signature · 1 line
2.21.0
#10 lore raw

PATCH RESEND v6 10/12 thermal: qoriq: Do not report invalid temperature reading

In reply to Andrey Smirnov

Before returning measured temperature data to upper layer we need to make sure that the reading was marked as "valid" to avoid reporting bogus data.

---
 drivers/thermal/qoriq_thermal.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)
drivers/thermal/qoriq_thermal.c +18 -1
index 5f964f806187..2f8c5feb1a25 100644
@@ -37,6 +37,7 @@
 #define REGS_TRITSR(n)	(0x100 + 16 * (n)) /* Immediate Temperature
 					    * Site Register
 					    */
+#define TRITSR_V	BIT(31)
 #define REGS_TTRnCR(n)	(0xf10 + 4 * (n)) /* Temperature Range n
 					   * Control Register
 					   */
@@ -62,8 +63,24 @@ static int tmu_get_temp(void *p, int *temp)
 	struct qoriq_sensor *qsensor = p;
 	struct qoriq_tmu_data *qdata = qoriq_sensor_to_data(qsensor);
 	u32 val;
+	/*
+	 * REGS_TRITSR(id) has the following layout:
+	 *
+	 * 31  ... 7 6 5 4 3 2 1 0
+	 *  V          TEMP
+	 *
+	 * Where V bit signifies if the measurement is ready and is
+	 * within sensor range. TEMP is an 8 bit value representing
+	 * temperature in C.
+	 */
+	if (regmap_read_poll_timeout(qdata->regmap,
+				     REGS_TRITSR(qsensor->id),
+				     val,
+				     val & TRITSR_V,
+				     USEC_PER_MSEC,
+				     10 * USEC_PER_MSEC))
+		return -ENODATA;
 
-	regmap_read(qdata->regmap, REGS_TRITSR(qsensor->id), &val);
 	*temp = (val & 0xff) * 1000;
 
 	return 0;
Signature · 1 line
2.21.0
#11 lore raw

PATCH RESEND v6 11/12 thermal_hwmon: Add devres wrapper for thermal_add_hwmon_sysfs()

In reply to Andrey Smirnov

Add devres wrapper for thermal_add_hwmon_sysfs() to simplify driver code.

---
 drivers/thermal/thermal_hwmon.c | 28 ++++++++++++++++++++++++++++
 drivers/thermal/thermal_hwmon.h |  7 +++++++
 2 files changed, 35 insertions(+)
drivers/thermal/thermal_hwmon.c +28 -0
index 40c69a533b24..4e79524182e1 100644
@@ -244,3 +244,31 @@ void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz)
 	kfree(hwmon);
 }
 EXPORT_SYMBOL_GPL(thermal_remove_hwmon_sysfs);
+
+static void devm_thermal_hwmon_release(struct device *dev, void *res)
+{
+	thermal_remove_hwmon_sysfs(*(struct thermal_zone_device **)res);
+}
+
+int devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
+{
+	struct thermal_zone_device **ptr;
+	int ret;
+
+	ptr = devres_alloc(devm_thermal_hwmon_release, sizeof(*ptr),
+			   GFP_KERNEL);
+	if (!ptr)
+		return -ENOMEM;
+
+	ret = thermal_add_hwmon_sysfs(tz);
+	if (ret) {
+		devres_free(ptr);
+		return ret;
+	}
+
+	*ptr = tz;
+	devres_add(&tz->device, ptr);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(devm_thermal_add_hwmon_sysfs);
drivers/thermal/thermal_hwmon.h +7 -0
index a160b9d62dd0..1a9d65f6a6a8 100644
@@ -17,6 +17,7 @@
 
 #ifdef CONFIG_THERMAL_HWMON
 int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz);
+int devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz);
 void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz);
 #else
 static inline int
@@ -25,6 +26,12 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
 	return 0;
 }
 
+static inline int
+devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
+{
+	return 0;
+}
+
 static inline void
 thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz)
 {
Signature · 1 line
2.21.0
#12 lore raw

PATCH RESEND v6 12/12 thermal: qoriq: Add hwmon support

In reply to Andrey Smirnov

Expose thermal readings as a HWMON device, so that it could be accessed using lm-sensors.

---
 drivers/thermal/qoriq_thermal.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/thermal/qoriq_thermal.c +6 -0
index 2f8c5feb1a25..56f9927cf63c 100644
@@ -12,6 +12,7 @@
 #include <linux/thermal.h>
 
 #include "thermal_core.h"
+#include "thermal_hwmon.h"
 
 #define SITES_MAX	16
 
@@ -115,6 +116,11 @@ static int qoriq_tmu_register_tmu_zone(struct device *dev,
 			regmap_write(qdata->regmap, REGS_TMR, TMR_DISABLE);
 			return ret;
 		}
+
+		if (devm_thermal_add_hwmon_sysfs(tzd))
+			dev_warn(dev,
+				 "Failed to add hwmon sysfs attributes\n");
+
 	}
 
 	return 0;
Signature · 1 line
2.21.0