powerpc/64s/exception: initial reworking of
Subsystems (2)
Nicholas Piggin
reviewercover powerpc/64s/exception: initial reworking of
This applies on top of the previous exception series.
Until now the focus was on making the code generation macros sane, ironing out irregularities and needless differences in handlers, and sharing code. Some change of generated code was required, but minimised as much as possible.
This series begins to change generated code in a bigger way. This is an assortment of changes, one of the big goals goals is really moving code and especially branches and logic and conditional compilation out of "unrelocated" interrupt entry points, with the hope of making KASLR more effective when it is implemented.
After this is a more significant rework of the instruction sequences with the aim of improving performance, but I will stop here for the next merge window.
Thanks,
Nick
Nicholas Piggin (10):
powerpc/64s/exception: Add ISIDE option powerpc/64s/exception: move real->virt switch into the common handler powerpc/64s/exception: move soft-mask test to common code powerpc/64s/exception: move KVM test to common code powerpc/64s/exception: remove confusing IEARLY option powerpc/64s/exception: remove the SPR saving patch code macros powerpc/64s/exception: trim unused arguments from KVMTEST macro powerpc/64s/exception: hdecrementer avoid touching the stack powerpc/64s/exception: re-inline some handlers powerpc/64s/exception: add more comments for interrupt handlers
arch/powerpc/include/asm/exception-64s.h | 4 - arch/powerpc/include/asm/time.h | 1 - arch/powerpc/kernel/exceptions-64s.S | 1151 ++++++++++++++-------- arch/powerpc/kernel/time.c | 9 - arch/powerpc/kvm/book3s_hv_rmhandlers.S | 11 - arch/powerpc/kvm/book3s_segment.S | 7 - 6 files changed, 716 insertions(+), 467 deletions(-)
Signature · 1 line
2.22.0
Nicholas Piggin
reviewerPATCH 1/10 powerpc/64s/exception: Add ISIDE option
Rather than using DAR=2 to select the i-side registers, add an explicit option.
--- arch/powerpc/kernel/exceptions-64s.S | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +16 -7
@@ -199,6 +199,7 @@ END_FTR_SECTION_NESTED(ftr,ftr,943) #define IVEC .L_IVEC_\name\() #define IHSRR .L_IHSRR_\name\() #define IAREA .L_IAREA_\name\() +#define IISIDE .L_IISIDE_\name\() #define IDAR .L_IDAR_\name\() #define IDSISR .L_IDSISR_\name\() #define ISET_RI .L_ISET_RI_\name\()
@@ -231,6 +232,9 @@ do_define_int n .ifndef IAREA .error "IAREA not defined" .endif + .ifndef IISIDE + IISIDE=0 + .endif .ifndef IDAR IDAR=0 .endif
@@ -546,7 +550,7 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) */ GET_SCRATCH0(r10) std r10,IAREA+EX_R13(r13) - .if IDAR == 1 + .if IDAR && !IISIDE .if IHSRR mfspr r10,SPRN_HDAR .else
@@ -554,7 +558,7 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) .endif std r10,IAREA+EX_DAR(r13) .endif - .if IDSISR == 1 + .if IDSISR && !IISIDE .if IHSRR mfspr r10,SPRN_HDSISR .else
@@ -629,16 +633,18 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) std r9,GPR11(r1) std r10,GPR12(r1) std r11,GPR13(r1) + .if IDAR - .if IDAR == 2 + .if IISIDE ld r10,_NIP(r1) .else ld r10,IAREA+EX_DAR(r13) .endif std r10,_DAR(r1) .endif + .if IDSISR - .if IDSISR == 2 + .if IISIDE ld r10,_MSR(r1) lis r11,DSISR_SRR1_MATCH_64S@h and r10,r10,r11
@@ -647,6 +653,7 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) .endif std r10,_DSISR(r1) .endif + BEGIN_FTR_SECTION_NESTED(66) ld r10,IAREA+EX_CFAR(r13) std r10,ORIG_GPR3(r1)
@@ -1324,8 +1331,9 @@ INT_DEFINE_BEGIN(instruction_access) IVEC=0x400 IHSRR=EXC_STD IAREA=PACA_EXGEN - IDAR=2 - IDSISR=2 + IISIDE=1 + IDAR=1 + IDSISR=1 IKVM_REAL=1 INT_DEFINE_END(instruction_access)
@@ -1355,7 +1363,8 @@ INT_DEFINE_BEGIN(instruction_access_slb) IHSRR=EXC_STD IAREA=PACA_EXSLB IRECONCILE=0 - IDAR=2 + IISIDE=1 + IDAR=1 IKVM_REAL=1 INT_DEFINE_END(instruction_access_slb)
Signature · 1 line
2.22.0
Nicholas Piggin
reviewerPATCH 2/10 powerpc/64s/exception: move real->virt switch into the common handler
In reply to Nicholas PigginThe real mode interrupt entry points currently use rfid to branch to the common handler in virtual mode. This is a significant amount of code, and forces other code (notably the KVM test) to live in the real mode handler.
In the interest of minimising the amount of code that runs unrelocated move the switch to virt mode into the common code, and do it with mtmsrd, which avoids clobbering SRRs (although the post-KVMTEST performance of real-mode interrupt handlers is not a big concern these days).
This requires CTR to always be saved (real-mode needs to reach 0xc...) but that's not a huge impact these days. It could be optimized away in future.
--- arch/powerpc/include/asm/exception-64s.h | 4 - arch/powerpc/kernel/exceptions-64s.S | 248 ++++++++++------------- 2 files changed, 106 insertions(+), 146 deletions(-)
arch/powerpc/include/asm/exception-64s.h +0 -4
@@ -33,11 +33,7 @@#include <asm/feature-fixups.h> /* PACA save area size in u64 units (exgen, exmc, etc) */ -#if defined(CONFIG_RELOCATABLE )#define EX_SIZE 10 -#else -#define EX_SIZE 9 -#endif /* * maximum recursive depth of MCE exceptions
arch/powerpc/kernel/exceptions-64s.S +106 -142
434 lines not on this page · raw message
Signature · 1 line
2.22.0
Nicholas Piggin
reviewerPATCH 3/10 powerpc/64s/exception: move soft-mask test to common code
In reply to Nicholas PigginAs well as moving code out of the unrelocated vectors, this allows the masked handlers to be moved to common code, and allows the soft_nmi handler to be generated more like a regular handler.
--- arch/powerpc/kernel/exceptions-64s.S | 108 +++++++++++++-------------- 1 file changed, 51 insertions(+), 57 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +51 -57
@@ -414,36 +414,6 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) .if (!\virt && IKVM_REAL) || (\virt && IKVM_VIRT) KVMTEST \name IHSRR IVEC .endif - .if IMASK - lbz r10,PACAIRQSOFTMASK(r13) - andi. r10,r10,IMASK - /* Associate vector numbers with bits in paca->irq_happened */ - .if IVEC == 0x500 || IVEC == 0xea0 - li r10,PACA_IRQ_EE - .elseif IVEC == 0x900 - li r10,PACA_IRQ_DEC - .elseif IVEC == 0xa00 || IVEC == 0xe80 - li r10,PACA_IRQ_DBELL - .elseif IVEC == 0xe60 - li r10,PACA_IRQ_HMI - .elseif IVEC == 0xf00 - li r10,PACA_IRQ_PMI - .else - .abort "Bad maskable vector" - .endif - - .if IHSRR == EXC_HV_OR_STD - BEGIN_FTR_SECTION - bne masked_Hinterrupt - FTR_SECTION_ELSE - bne masked_interrupt - ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) - .elseif IHSRR - bne masked_Hinterrupt - .else - bne masked_interrupt - .endif - .endif std r11,IAREA+EX_R11(r13) std r12,IAREA+EX_R12(r13)
@@ -528,6 +498,37 @@ DEFINE_FIXED_SYMBOL(\name\()_common_virt) .endm .macro __GEN_COMMON_BODY name + .if IMASK + lbz r10,PACAIRQSOFTMASK(r13) + andi. r10,r10,IMASK + /* Associate vector numbers with bits in paca->irq_happened */ + .if IVEC == 0x500 || IVEC == 0xea0 + li r10,PACA_IRQ_EE + .elseif IVEC == 0x900 + li r10,PACA_IRQ_DEC + .elseif IVEC == 0xa00 || IVEC == 0xe80 + li r10,PACA_IRQ_DBELL + .elseif IVEC == 0xe60 + li r10,PACA_IRQ_HMI + .elseif IVEC == 0xf00 + li r10,PACA_IRQ_PMI + .else + .abort "Bad maskable vector" + .endif + + .if IHSRR == EXC_HV_OR_STD + BEGIN_FTR_SECTION + bne masked_Hinterrupt + FTR_SECTION_ELSE + bne masked_interrupt + ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) + .elseif IHSRR + bne masked_Hinterrupt + .else + bne masked_interrupt + .endif + .endif + .if ISTACK andi. r10,r12,MSR_PR /* See if coming from user */ mr r10,r1 /* Save r1 */
@@ -2395,18 +2396,12 @@ EXC_VIRT_NONE(0x5800, 0x100) #ifdef CONFIG_PPC_WATCHDOG -#define MASKED_DEC_HANDLER_LABEL 3f - -#define MASKED_DEC_HANDLER(_H) \ -3: /* soft-nmi */ \ - std r12,PACA_EXGEN+EX_R12(r13); \ - GET_SCRATCH0(r10); \ - std r10,PACA_EXGEN+EX_R13(r13); \ - mfspr r11,SPRN_SRR0; /* save SRR0 */ \ - mfspr r12,SPRN_SRR1; /* and SRR1 */ \ - LOAD_HANDLER(r10, soft_nmi_common); \ - mtctr r10; \ - bctr +INT_DEFINE_BEGIN(soft_nmi) + IVEC=0x900 + IHSRR=EXC_STD + IAREA=PACA_EXGEN + ISTACK=0 +INT_DEFINE_END(soft_nmi) /* * Branch to soft_nmi_interrupt using the emergency stack. The emergency
@@ -2418,19 +2413,16 @@ EXC_VIRT_NONE(0x5800, 0x100) * and run it entirely with interrupts hard disabled. */ EXC_COMMON_BEGIN(soft_nmi_common) + mfspr r11,SPRN_SRR0 mr r10,r1 ld r1,PACAEMERGSP(r13) subi r1,r1,INT_FRAME_SIZE - __ISTACK(decrementer)=0 - __GEN_COMMON_BODY decrementer + __GEN_COMMON_BODY soft_nmi bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl soft_nmi_interrupt b ret_from_except -#else /* CONFIG_PPC_WATCHDOG */ -#define MASKED_DEC_HANDLER_LABEL 2f /* normal return */ -#define MASKED_DEC_HANDLER(_H) #endif /* CONFIG_PPC_WATCHDOG */ /*
@@ -2449,7 +2441,6 @@ masked_Hinterrupt: .else masked_interrupt: .endif - std r11,PACA_EXGEN+EX_R11(r13) lbz r11,PACAIRQHAPPENED(r13) or r11,r11,r10 stb r11,PACAIRQHAPPENED(r13)
@@ -2458,26 +2449,30 @@ masked_interrupt: lis r10,0x7fff ori r10,r10,0xffff mtspr SPRN_DEC,r10 - b MASKED_DEC_HANDLER_LABEL +#ifdef CONFIG_PPC_WATCHDOG + b soft_nmi_common +#else + b 2f +#endif 1: andi. r10,r10,PACA_IRQ_MUST_HARD_MASK beq 2f + xori r12,r12,MSR_EE /* clear MSR_EE */ .if \hsrr - mfspr r10,SPRN_HSRR1 - xori r10,r10,MSR_EE /* clear MSR_EE */ - mtspr SPRN_HSRR1,r10 + mtspr SPRN_HSRR1,r12 .else - mfspr r10,SPRN_SRR1 - xori r10,r10,MSR_EE /* clear MSR_EE */ - mtspr SPRN_SRR1,r10 + mtspr SPRN_SRR1,r12 .endif ori r11,r11,PACA_IRQ_HARD_DIS stb r11,PACAIRQHAPPENED(r13) 2: /* done */ + ld r10,PACA_EXGEN+EX_CTR(r13) + mtctr r10 mtcrf 0x80,r9 std r1,PACAR1(r13) ld r9,PACA_EXGEN+EX_R9(r13) ld r10,PACA_EXGEN+EX_R10(r13) ld r11,PACA_EXGEN+EX_R11(r13) + ld r12,PACA_EXGEN+EX_R12(r13) /* returns to kernel where r13 must be set up, so don't restore it */ .if \hsrr HRFI_TO_KERNEL
@@ -2485,7 +2480,6 @@ masked_interrupt: RFI_TO_KERNEL .endif b . - MASKED_DEC_HANDLER(\hsrr\()) .endm TRAMP_REAL_BEGIN(stf_barrier_fallback)
@@ -2592,7 +2586,7 @@ TRAMP_REAL_BEGIN(hrfi_flush_fallback) * instruction code patches (which end up in the common .text area) * cannot reach these if they are put there. */ -USE_FIXED_SECTION(virt_trampolines) +USE_TEXT_SECTION() MASKED_INTERRUPT EXC_STD MASKED_INTERRUPT EXC_HV
Signature · 1 line
2.22.0
Nicholas Piggin
reviewerPATCH 4/10 powerpc/64s/exception: move KVM test to common code
In reply to Nicholas PigginThis allows more code to be moved out of unrelocated regions. The system call KVMTEST is changed to be open-coded and remain in the tramp area to avoid having to move it to entry_64.S. The custom nature of the system call entry code means the hcall case can be made more streamlined than regular interrupt handlers.
--- arch/powerpc/kernel/exceptions-64s.S | 235 ++++++++++++------------ arch/powerpc/kvm/book3s_hv_rmhandlers.S | 11 -- arch/powerpc/kvm/book3s_segment.S | 7 - 3 files changed, 115 insertions(+), 138 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +115 -120
@@ -44,7 +44,6 @@ * EXC_VIRT_BEGIN/END - virt (AIL), unrelocated exception vectors * TRAMP_REAL_BEGIN - real, unrelocated helpers (virt may call these) * TRAMP_VIRT_BEGIN - virt, unreloc helpers (in practice, real can use) - * TRAMP_KVM_BEGIN - KVM handlers, these are put into real, unrelocated * EXC_COMMON - After switching to virtual, relocated mode. */
@@ -74,13 +73,6 @@ name: #define TRAMP_VIRT_BEGIN(name) \ FIXED_SECTION_ENTRY_BEGIN(virt_trampolines, name) -#ifdef CONFIG_KVM_BOOK3S_64_HANDLER -#define TRAMP_KVM_BEGIN(name) \ - TRAMP_VIRT_BEGIN(name) -#else -#define TRAMP_KVM_BEGIN(name) -#endif - #define EXC_REAL_NONE(start, size) \ FIXED_SECTION_ENTRY_BEGIN_LOCATION(real_vectors, exc_real_##start##_##unused, start, size); \ FIXED_SECTION_ENTRY_END_LOCATION(real_vectors, exc_real_##start##_##unused, start, size)
@@ -271,6 +263,9 @@ do_define_int n .endm .macro GEN_KVM name + .balign IFETCH_ALIGN_BYTES +\name\()_kvm: + .if IKVM_SKIP cmpwi r10,KVM_GUEST_MODE_SKIP beq 89f
@@ -281,13 +276,18 @@ BEGIN_FTR_SECTION_NESTED(947) END_FTR_SECTION_NESTED(CPU_FTR_CFAR,CPU_FTR_CFAR,947) .endif + ld r10,PACA_EXGEN+EX_CTR(r13) + mtctr r10 BEGIN_FTR_SECTION_NESTED(948) ld r10,IAREA+EX_PPR(r13) std r10,HSTATE_PPR(r13) END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) - ld r10,IAREA+EX_R10(r13) + ld r11,IAREA+EX_R11(r13) + ld r12,IAREA+EX_R12(r13) std r12,HSTATE_SCRATCH0(r13) sldi r12,r9,32 + ld r9,IAREA+EX_R9(r13) + ld r10,IAREA+EX_R10(r13) /* HSRR variants have the 0x2 bit added to their trap number */ .if IHSRR == EXC_HV_OR_STD BEGIN_FTR_SECTION
@@ -300,29 +300,16 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) .else ori r12,r12,(IVEC) .endif - -#ifdef CONFIG_RELOCATABLE - /* - * KVM requires __LOAD_FAR_HANDLER beause kvmppc_interrupt lives - * outside the head section. CONFIG_RELOCATABLE KVM expects CTR - * to be saved in HSTATE_SCRATCH1. - */ - ld r9,IAREA+EX_CTR(r13) - std r9,HSTATE_SCRATCH1(r13) - __LOAD_FAR_HANDLER(r9, kvmppc_interrupt) - mtctr r9 - ld r9,IAREA+EX_R9(r13) - bctr -#else - ld r9,IAREA+EX_R9(r13) b kvmppc_interrupt -#endif - .if IKVM_SKIP 89: mtocrf 0x80,r9 + ld r10,PACA_EXGEN+EX_CTR(r13) + mtctr r10 ld r9,IAREA+EX_R9(r13) ld r10,IAREA+EX_R10(r13) + ld r11,IAREA+EX_R11(r13) + ld r12,IAREA+EX_R12(r13) .if IHSRR == EXC_HV_OR_STD BEGIN_FTR_SECTION b kvmppc_skip_Hinterrupt
@@ -410,11 +397,6 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) mfctr r10 std r10,IAREA+EX_CTR(r13) mfcr r9 - - .if (!\virt && IKVM_REAL) || (\virt && IKVM_VIRT) - KVMTEST \name IHSRR IVEC - .endif - std r11,IAREA+EX_R11(r13) std r12,IAREA+EX_R12(r13)
@@ -478,6 +460,10 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) .macro __GEN_COMMON_ENTRY name DEFINE_FIXED_SYMBOL(\name\()_common_real) \name\()_common_real: + .if IKVM_REAL + KVMTEST \name IHSRR IVEC + .endif + ld r10,PACAKMSR(r13) /* get MSR value for kernel */ .if ! ISET_RI xori r10,r10,MSR_RI /* Clear MSR_RI */
@@ -489,6 +475,10 @@ DEFINE_FIXED_SYMBOL(\name\()_common_real) .balign IFETCH_ALIGN_BYTES DEFINE_FIXED_SYMBOL(\name\()_common_virt) \name\()_common_virt: + .if IKVM_VIRT + KVMTEST \name IHSRR IVEC + .endif + .if ISET_RI li r10,MSR_RI mtmsrd r10,1 /* Set MSR_RI */
@@ -848,8 +838,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) */ EXC_REAL_END(system_reset, 0x100, 0x100) EXC_VIRT_NONE(0x4100, 0x100) -TRAMP_KVM_BEGIN(system_reset_kvm) - GEN_KVM system_reset #ifdef CONFIG_PPC_P7_NAP TRAMP_REAL_BEGIN(system_reset_idle_wake)
@@ -927,6 +915,8 @@ EXC_COMMON_BEGIN(system_reset_common) EXCEPTION_RESTORE_REGS EXC_STD RFI_TO_USER_OR_KERNEL + GEN_KVM system_reset + INT_DEFINE_BEGIN(machine_check_early) IVEC=0x200
@@ -970,9 +960,6 @@ TRAMP_REAL_BEGIN(machine_check_fwnmi) GEN_INT_ENTRY machine_check_early, GEN_REAL #endif -TRAMP_KVM_BEGIN(machine_check_kvm) - GEN_KVM machine_check - #define MACHINE_CHECK_HANDLER_WINDUP \ /* Clear MSR_RI before setting SRR0 and SRR1. */\ li r9,0; \
@@ -1129,6 +1116,9 @@ EXC_COMMON_BEGIN(machine_check_common) bl machine_check_exception b ret_from_except + GEN_KVM machine_check + + #ifdef CONFIG_PPC_P7_NAP /* * This is an idle wakeup. Low level machine check has already been
@@ -1223,8 +1213,6 @@ EXC_REAL_END(data_access, 0x300, 0x80) EXC_VIRT_BEGIN(data_access, 0x4300, 0x80) GEN_INT_ENTRY data_access, GEN_VIRT EXC_VIRT_END(data_access, 0x4300, 0x80) -TRAMP_KVM_BEGIN(data_access_kvm) - GEN_KVM data_access EXC_COMMON_BEGIN(data_access_common) GEN_COMMON data_access ld r4,_DAR(r1)
@@ -1237,6 +1225,8 @@ MMU_FTR_SECTION_ELSE b handle_page_fault ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) + GEN_KVM data_access + INT_DEFINE_BEGIN(data_access_slb) IVEC=0x380
@@ -1254,8 +1244,6 @@ EXC_REAL_END(data_access_slb, 0x380, 0x80) EXC_VIRT_BEGIN(data_access_slb, 0x4380, 0x80) GEN_INT_ENTRY data_access_slb, GEN_VIRT EXC_VIRT_END(data_access_slb, 0x4380, 0x80) -TRAMP_KVM_BEGIN(data_access_slb_kvm) - GEN_KVM data_access_slb EXC_COMMON_BEGIN(data_access_slb_common) GEN_COMMON data_access_slb ld r4,_DAR(r1)
@@ -1280,6 +1268,8 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) bl do_bad_slb_fault b ret_from_except + GEN_KVM data_access_slb + INT_DEFINE_BEGIN(instruction_access) IVEC=0x400
@@ -1297,8 +1287,6 @@ EXC_REAL_END(instruction_access, 0x400, 0x80) EXC_VIRT_BEGIN(instruction_access, 0x4400, 0x80) GEN_INT_ENTRY instruction_access, GEN_VIRT EXC_VIRT_END(instruction_access, 0x4400, 0x80) -TRAMP_KVM_BEGIN(instruction_access_kvm) - GEN_KVM instruction_access EXC_COMMON_BEGIN(instruction_access_common) GEN_COMMON instruction_access ld r4,_DAR(r1)
@@ -1311,6 +1299,8 @@ MMU_FTR_SECTION_ELSE b handle_page_fault ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) + GEN_KVM instruction_access + INT_DEFINE_BEGIN(instruction_access_slb) IVEC=0x480
@@ -1328,8 +1318,6 @@ EXC_REAL_END(instruction_access_slb, 0x480, 0x80) EXC_VIRT_BEGIN(instruction_access_slb, 0x4480, 0x80) GEN_INT_ENTRY instruction_access_slb, GEN_VIRT EXC_VIRT_END(instruction_access_slb, 0x4480, 0x80) -TRAMP_KVM_BEGIN(instruction_access_slb_kvm) - GEN_KVM instruction_access_slb EXC_COMMON_BEGIN(instruction_access_slb_common) GEN_COMMON instruction_access_slb ld r4,_DAR(r1)
@@ -1354,6 +1342,9 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) bl do_bad_slb_fault b ret_from_except + GEN_KVM instruction_access_slb + + INT_DEFINE_BEGIN(hardware_interrupt) IVEC=0x500 IHSRR=EXC_HV_OR_STD
@@ -1369,8 +1360,6 @@ EXC_REAL_END(hardware_interrupt, 0x500, 0x100) EXC_VIRT_BEGIN(hardware_interrupt, 0x4500, 0x100) GEN_INT_ENTRY hardware_interrupt, GEN_VIRT EXC_VIRT_END(hardware_interrupt, 0x4500, 0x100) -TRAMP_KVM_BEGIN(hardware_interrupt_kvm) - GEN_KVM hardware_interrupt EXC_COMMON_BEGIN(hardware_interrupt_common) GEN_COMMON hardware_interrupt FINISH_NAP
@@ -1379,6 +1368,8 @@ EXC_COMMON_BEGIN(hardware_interrupt_common) bl do_IRQ b ret_from_except_lite + GEN_KVM hardware_interrupt + INT_DEFINE_BEGIN(alignment) IVEC=0x600
@@ -1395,8 +1386,6 @@ EXC_REAL_END(alignment, 0x600, 0x100) EXC_VIRT_BEGIN(alignment, 0x4600, 0x100) GEN_INT_ENTRY alignment, GEN_VIRT EXC_VIRT_END(alignment, 0x4600, 0x100) -TRAMP_KVM_BEGIN(alignment_kvm) - GEN_KVM alignment EXC_COMMON_BEGIN(alignment_common) GEN_COMMON alignment bl save_nvgprs
@@ -1404,6 +1393,8 @@ EXC_COMMON_BEGIN(alignment_common) bl alignment_exception b ret_from_except + GEN_KVM alignment + INT_DEFINE_BEGIN(program_check) IVEC=0x700
@@ -1418,8 +1409,6 @@ EXC_REAL_END(program_check, 0x700, 0x100) EXC_VIRT_BEGIN(program_check, 0x4700, 0x100) GEN_INT_ENTRY program_check, GEN_VIRT EXC_VIRT_END(program_check, 0x4700, 0x100) -TRAMP_KVM_BEGIN(program_check_kvm) - GEN_KVM program_check EXC_COMMON_BEGIN(program_check_common) __GEN_COMMON_ENTRY program_check
@@ -1459,6 +1448,8 @@ EXC_COMMON_BEGIN(program_check_common) bl program_check_exception b ret_from_except + GEN_KVM program_check + INT_DEFINE_BEGIN(fp_unavailable) IVEC=0x800
@@ -1474,8 +1465,6 @@ EXC_REAL_END(fp_unavailable, 0x800, 0x100) EXC_VIRT_BEGIN(fp_unavailable, 0x4800, 0x100) GEN_INT_ENTRY fp_unavailable, GEN_VIRT EXC_VIRT_END(fp_unavailable, 0x4800, 0x100) -TRAMP_KVM_BEGIN(fp_unavailable_kvm) - GEN_KVM fp_unavailable EXC_COMMON_BEGIN(fp_unavailable_common) GEN_COMMON fp_unavailable bne 1f /* if from user, just load it up */
@@ -1505,6 +1494,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_TM) b ret_from_except #endif + GEN_KVM fp_unavailable + INT_DEFINE_BEGIN(decrementer) IVEC=0x900
@@ -1520,8 +1511,6 @@ EXC_REAL_END(decrementer, 0x900, 0x80) EXC_VIRT_BEGIN(decrementer, 0x4900, 0x80) GEN_INT_ENTRY decrementer, GEN_VIRT EXC_VIRT_END(decrementer, 0x4900, 0x80) -TRAMP_KVM_BEGIN(decrementer_kvm) - GEN_KVM decrementer EXC_COMMON_BEGIN(decrementer_common) GEN_COMMON decrementer FINISH_NAP
@@ -1530,6 +1519,8 @@ EXC_COMMON_BEGIN(decrementer_common) bl timer_interrupt b ret_from_except_lite + GEN_KVM decrementer + INT_DEFINE_BEGIN(hdecrementer) IVEC=0x980
@@ -1545,8 +1536,6 @@ EXC_REAL_END(hdecrementer, 0x980, 0x80) EXC_VIRT_BEGIN(hdecrementer, 0x4980, 0x80) GEN_INT_ENTRY hdecrementer, GEN_VIRT EXC_VIRT_END(hdecrementer, 0x4980, 0x80) -TRAMP_KVM_BEGIN(hdecrementer_kvm) - GEN_KVM hdecrementer EXC_COMMON_BEGIN(hdecrementer_common) GEN_COMMON hdecrementer bl save_nvgprs
@@ -1554,6 +1543,8 @@ EXC_COMMON_BEGIN(hdecrementer_common) bl hdec_interrupt b ret_from_except + GEN_KVM hdecrementer + INT_DEFINE_BEGIN(doorbell_super) IVEC=0xa00
@@ -1569,8 +1560,6 @@ EXC_REAL_END(doorbell_super, 0xa00, 0x100) EXC_VIRT_BEGIN(doorbell_super, 0x4a00, 0x100) GEN_INT_ENTRY doorbell_super, GEN_VIRT EXC_VIRT_END(doorbell_super, 0x4a00, 0x100) -TRAMP_KVM_BEGIN(doorbell_super_kvm) - GEN_KVM doorbell_super EXC_COMMON_BEGIN(doorbell_super_common) GEN_COMMON doorbell_super FINISH_NAP
@@ -1583,6 +1572,8 @@ EXC_COMMON_BEGIN(doorbell_super_common) #endif b ret_from_except_lite + GEN_KVM doorbell_super + EXC_REAL_NONE(0xb00, 0x100) EXC_VIRT_NONE(0x4b00, 0x100)
@@ -1704,6 +1695,7 @@ EXC_VIRT_BEGIN(system_call, 0x4c00, 0x100) EXC_VIRT_END(system_call, 0x4c00, 0x100) #ifdef CONFIG_KVM_BOOK3S_64_HANDLER +TRAMP_REAL_BEGIN(system_call_kvm) /* * This is a hcall, so register convention is as above, with these * differences:
@@ -1711,20 +1703,35 @@ EXC_VIRT_END(system_call, 0x4c00, 0x100) * ctr = orig r13 * orig r10 saved in PACA */ -TRAMP_KVM_BEGIN(system_call_kvm) /* * Save the PPR (on systems that support it) before changing to * HMT_MEDIUM. That allows the KVM code to save that value into the * guest state (it is the guest's PPR value). */ - OPT_GET_SPR(r10, SPRN_PPR, CPU_FTR_HAS_PPR) +BEGIN_FTR_SECTION_NESTED(948) + mfspr r10,SPRN_PPR + std r10,HSTATE_PPR(r13) +END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) HMT_MEDIUM - OPT_SAVE_REG_TO_PACA(PACA_EXGEN+EX_PPR, r10, CPU_FTR_HAS_PPR) mfctr r10 SET_SCRATCH0(r10) - std r9,PACA_EXGEN+EX_R9(r13) - mfcr r9 - GEN_KVM system_call + mfcr r10 + std r12,HSTATE_SCRATCH0(r13) + sldi r12,r10,32 + ori r12,r12,0xc00 +#ifdef CONFIG_RELOCATABLE + /* + * Requires __LOAD_FAR_HANDLER beause kvmppc_interrupt lives + * outside the head section. + */ + __LOAD_FAR_HANDLER(r10, kvmppc_interrupt) + mtctr r10 + ld r10,PACA_EXGEN+EX_R10(r13) + bctr +#else + ld r10,PACA_EXGEN+EX_R10(r13) + b kvmppc_interrupt +#endif #endif
@@ -1741,8 +1748,6 @@ EXC_REAL_END(single_step, 0xd00, 0x100) EXC_VIRT_BEGIN(single_step, 0x4d00, 0x100) GEN_INT_ENTRY single_step, GEN_VIRT EXC_VIRT_END(single_step, 0x4d00, 0x100) -TRAMP_KVM_BEGIN(single_step_kvm) - GEN_KVM single_step EXC_COMMON_BEGIN(single_step_common) GEN_COMMON single_step bl save_nvgprs
@@ -1750,6 +1755,8 @@ EXC_COMMON_BEGIN(single_step_common) bl single_step_exception b ret_from_except + GEN_KVM single_step + INT_DEFINE_BEGIN(h_data_storage) IVEC=0xe00
@@ -1768,8 +1775,6 @@ EXC_REAL_END(h_data_storage, 0xe00, 0x20) EXC_VIRT_BEGIN(h_data_storage, 0x4e00, 0x20) GEN_INT_ENTRY h_data_storage, GEN_VIRT, GEN_OOL EXC_VIRT_END(h_data_storage, 0x4e00, 0x20) -TRAMP_KVM_BEGIN(h_data_storage_kvm) - GEN_KVM h_data_storage EXC_COMMON_BEGIN(h_data_storage_common) GEN_COMMON h_data_storage bl save_nvgprs
@@ -1783,6 +1788,8 @@ MMU_FTR_SECTION_ELSE ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_TYPE_RADIX) b ret_from_except + GEN_KVM h_data_storage + INT_DEFINE_BEGIN(h_instr_storage) IVEC=0xe20
@@ -1798,8 +1805,6 @@ EXC_REAL_END(h_instr_storage, 0xe20, 0x20) EXC_VIRT_BEGIN(h_instr_storage, 0x4e20, 0x20) GEN_INT_ENTRY h_instr_storage, GEN_VIRT, GEN_OOL EXC_VIRT_END(h_instr_storage, 0x4e20, 0x20) -TRAMP_KVM_BEGIN(h_instr_storage_kvm) - GEN_KVM h_instr_storage EXC_COMMON_BEGIN(h_instr_storage_common) GEN_COMMON h_instr_storage bl save_nvgprs
@@ -1807,6 +1812,8 @@ EXC_COMMON_BEGIN(h_instr_storage_common) bl unknown_exception b ret_from_except + GEN_KVM h_instr_storage + INT_DEFINE_BEGIN(emulation_assist) IVEC=0xe40
@@ -1822,8 +1829,6 @@ EXC_REAL_END(emulation_assist, 0xe40, 0x20) EXC_VIRT_BEGIN(emulation_assist, 0x4e40, 0x20) GEN_INT_ENTRY emulation_assist, GEN_VIRT, GEN_OOL EXC_VIRT_END(emulation_assist, 0x4e40, 0x20) -TRAMP_KVM_BEGIN(emulation_assist_kvm) - GEN_KVM emulation_assist EXC_COMMON_BEGIN(emulation_assist_common) GEN_COMMON emulation_assist bl save_nvgprs
@@ -1831,6 +1836,8 @@ EXC_COMMON_BEGIN(emulation_assist_common) bl emulation_assist_interrupt b ret_from_except + GEN_KVM emulation_assist + /* * hmi_exception trampoline is a special case. It jumps to hmi_exception_early
@@ -1862,10 +1869,6 @@ EXC_REAL_BEGIN(hmi_exception, 0xe60, 0x20) GEN_INT_ENTRY hmi_exception_early, GEN_REAL, GEN_OOL EXC_REAL_END(hmi_exception, 0xe60, 0x20) EXC_VIRT_NONE(0x4e60, 0x20) -TRAMP_KVM_BEGIN(hmi_exception_early_kvm) - GEN_KVM hmi_exception_early -TRAMP_KVM_BEGIN(hmi_exception_kvm) - GEN_KVM hmi_exception EXC_COMMON_BEGIN(hmi_exception_early_common) mfspr r11,SPRN_HSRR0 /* Save HSRR0 */
@@ -1892,6 +1895,8 @@ EXC_COMMON_BEGIN(hmi_exception_early_common) EXCEPTION_RESTORE_REGS EXC_HV GEN_INT_ENTRY hmi_exception, GEN_REAL + GEN_KVM hmi_exception_early + EXC_COMMON_BEGIN(hmi_exception_common) GEN_COMMON hmi_exception FINISH_NAP
@@ -1901,6 +1906,8 @@ EXC_COMMON_BEGIN(hmi_exception_common) bl handle_hmi_exception b ret_from_except + GEN_KVM hmi_exception + INT_DEFINE_BEGIN(h_doorbell) IVEC=0xe80
@@ -1917,8 +1924,6 @@ EXC_REAL_END(h_doorbell, 0xe80, 0x20) EXC_VIRT_BEGIN(h_doorbell, 0x4e80, 0x20) GEN_INT_ENTRY h_doorbell, GEN_VIRT, GEN_OOL EXC_VIRT_END(h_doorbell, 0x4e80, 0x20) -TRAMP_KVM_BEGIN(h_doorbell_kvm) - GEN_KVM h_doorbell EXC_COMMON_BEGIN(h_doorbell_common) GEN_COMMON h_doorbell FINISH_NAP
@@ -1931,6 +1936,8 @@ EXC_COMMON_BEGIN(h_doorbell_common) #endif b ret_from_except_lite + GEN_KVM h_doorbell + INT_DEFINE_BEGIN(h_virt_irq) IVEC=0xea0
@@ -1947,8 +1954,6 @@ EXC_REAL_END(h_virt_irq, 0xea0, 0x20) EXC_VIRT_BEGIN(h_virt_irq, 0x4ea0, 0x20) GEN_INT_ENTRY h_virt_irq, GEN_VIRT, GEN_OOL EXC_VIRT_END(h_virt_irq, 0x4ea0, 0x20) -TRAMP_KVM_BEGIN(h_virt_irq_kvm) - GEN_KVM h_virt_irq EXC_COMMON_BEGIN(h_virt_irq_common) GEN_COMMON h_virt_irq FINISH_NAP
@@ -1957,6 +1962,8 @@ EXC_COMMON_BEGIN(h_virt_irq_common) bl do_IRQ b ret_from_except_lite + GEN_KVM h_virt_irq + EXC_REAL_NONE(0xec0, 0x20) EXC_VIRT_NONE(0x4ec0, 0x20)
@@ -1978,8 +1985,6 @@ EXC_REAL_END(performance_monitor, 0xf00, 0x20) EXC_VIRT_BEGIN(performance_monitor, 0x4f00, 0x20) GEN_INT_ENTRY performance_monitor, GEN_VIRT, GEN_OOL EXC_VIRT_END(performance_monitor, 0x4f00, 0x20) -TRAMP_KVM_BEGIN(performance_monitor_kvm) - GEN_KVM performance_monitor EXC_COMMON_BEGIN(performance_monitor_common) GEN_COMMON performance_monitor FINISH_NAP
@@ -1988,6 +1993,8 @@ EXC_COMMON_BEGIN(performance_monitor_common) bl performance_monitor_exception b ret_from_except_lite + GEN_KVM performance_monitor + INT_DEFINE_BEGIN(altivec_unavailable) IVEC=0xf20
@@ -2003,8 +2010,6 @@ EXC_REAL_END(altivec_unavailable, 0xf20, 0x20) EXC_VIRT_BEGIN(altivec_unavailable, 0x4f20, 0x20) GEN_INT_ENTRY altivec_unavailable, GEN_VIRT, GEN_OOL EXC_VIRT_END(altivec_unavailable, 0x4f20, 0x20) -TRAMP_KVM_BEGIN(altivec_unavailable_kvm) - GEN_KVM altivec_unavailable EXC_COMMON_BEGIN(altivec_unavailable_common) GEN_COMMON altivec_unavailable #ifdef CONFIG_ALTIVEC
@@ -2038,6 +2043,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) bl altivec_unavailable_exception b ret_from_except + GEN_KVM altivec_unavailable + INT_DEFINE_BEGIN(vsx_unavailable) IVEC=0xf40
@@ -2053,8 +2060,6 @@ EXC_REAL_END(vsx_unavailable, 0xf40, 0x20) EXC_VIRT_BEGIN(vsx_unavailable, 0x4f40, 0x20) GEN_INT_ENTRY vsx_unavailable, GEN_VIRT, GEN_OOL EXC_VIRT_END(vsx_unavailable, 0x4f40, 0x20) -TRAMP_KVM_BEGIN(vsx_unavailable_kvm) - GEN_KVM vsx_unavailable EXC_COMMON_BEGIN(vsx_unavailable_common) GEN_COMMON vsx_unavailable #ifdef CONFIG_VSX
@@ -2087,6 +2092,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX) bl vsx_unavailable_exception b ret_from_except + GEN_KVM vsx_unavailable + INT_DEFINE_BEGIN(facility_unavailable) IVEC=0xf60
@@ -2101,8 +2108,6 @@ EXC_REAL_END(facility_unavailable, 0xf60, 0x20) EXC_VIRT_BEGIN(facility_unavailable, 0x4f60, 0x20) GEN_INT_ENTRY facility_unavailable, GEN_VIRT, GEN_OOL EXC_VIRT_END(facility_unavailable, 0x4f60, 0x20) -TRAMP_KVM_BEGIN(facility_unavailable_kvm) - GEN_KVM facility_unavailable EXC_COMMON_BEGIN(facility_unavailable_common) GEN_COMMON facility_unavailable bl save_nvgprs
@@ -2110,6 +2115,8 @@ EXC_COMMON_BEGIN(facility_unavailable_common) bl facility_unavailable_exception b ret_from_except + GEN_KVM facility_unavailable + INT_DEFINE_BEGIN(h_facility_unavailable) IVEC=0xf80
@@ -2125,8 +2132,6 @@ EXC_REAL_END(h_facility_unavailable, 0xf80, 0x20) EXC_VIRT_BEGIN(h_facility_unavailable, 0x4f80, 0x20) GEN_INT_ENTRY h_facility_unavailable, GEN_VIRT, GEN_OOL EXC_VIRT_END(h_facility_unavailable, 0x4f80, 0x20) -TRAMP_KVM_BEGIN(h_facility_unavailable_kvm) - GEN_KVM h_facility_unavailable EXC_COMMON_BEGIN(h_facility_unavailable_common) GEN_COMMON h_facility_unavailable bl save_nvgprs
@@ -2134,6 +2139,8 @@ EXC_COMMON_BEGIN(h_facility_unavailable_common) bl facility_unavailable_exception b ret_from_except + GEN_KVM h_facility_unavailable + EXC_REAL_NONE(0xfa0, 0x20) EXC_VIRT_NONE(0x4fa0, 0x20)
@@ -2160,14 +2167,15 @@ EXC_REAL_BEGIN(cbe_system_error, 0x1200, 0x100) GEN_INT_ENTRY cbe_system_error, GEN_REAL EXC_REAL_END(cbe_system_error, 0x1200, 0x100) EXC_VIRT_NONE(0x5200, 0x100) -TRAMP_KVM_BEGIN(cbe_system_error_kvm) - GEN_KVM cbe_system_error EXC_COMMON_BEGIN(cbe_system_error_common) GEN_COMMON cbe_system_error bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl cbe_system_error_exception b ret_from_except + + GEN_KVM cbe_system_error + #else /* CONFIG_CBE_RAS */ EXC_REAL_NONE(0x1200, 0x100) EXC_VIRT_NONE(0x5200, 0x100)
@@ -2188,8 +2196,6 @@ EXC_REAL_END(instruction_breakpoint, 0x1300, 0x100) EXC_VIRT_BEGIN(instruction_breakpoint, 0x5300, 0x100) GEN_INT_ENTRY instruction_breakpoint, GEN_VIRT EXC_VIRT_END(instruction_breakpoint, 0x5300, 0x100) -TRAMP_KVM_BEGIN(instruction_breakpoint_kvm) - GEN_KVM instruction_breakpoint EXC_COMMON_BEGIN(instruction_breakpoint_common) GEN_COMMON instruction_breakpoint bl save_nvgprs
@@ -2197,6 +2203,8 @@ EXC_COMMON_BEGIN(instruction_breakpoint_common) bl instruction_breakpoint_exception b ret_from_except + GEN_KVM instruction_breakpoint + EXC_REAL_NONE(0x1400, 0x100) EXC_VIRT_NONE(0x5400, 0x100)
@@ -2206,6 +2214,7 @@ INT_DEFINE_BEGIN(denorm_exception) IHSRR=EXC_HV IAREA=PACA_EXGEN IEARLY=2 + IKVM_REAL=1 INT_DEFINE_END(denorm_exception) EXC_REAL_BEGIN(denorm_exception, 0x1500, 0x100)
@@ -2215,7 +2224,6 @@ EXC_REAL_BEGIN(denorm_exception, 0x1500, 0x100) andis. r10,r10,(HSRR1_DENORM)@h /* denorm? */ bne+ denorm_assist #endif - KVMTEST denorm_exception, EXC_HV, 0x1500 mfspr r11,SPRN_HSRR0 mfspr r12,SPRN_HSRR1 GEN_BRANCH_TO_COMMON denorm_exception, GEN_REAL
@@ -2233,8 +2241,6 @@ EXC_VIRT_END(denorm_exception, 0x5500, 0x100) #else EXC_VIRT_NONE(0x5500, 0x100) #endif -TRAMP_KVM_BEGIN(denorm_exception_kvm) - GEN_KVM denorm_exception #ifdef CONFIG_PPC_DENORMALISATION TRAMP_REAL_BEGIN(denorm_assist)
@@ -2312,6 +2318,8 @@ EXC_COMMON_BEGIN(denorm_exception_common) bl unknown_exception b ret_from_except + GEN_KVM denorm_exception + #ifdef CONFIG_CBE_RAS INT_DEFINE_BEGIN(cbe_maintenance)
@@ -2326,14 +2334,15 @@ EXC_REAL_BEGIN(cbe_maintenance, 0x1600, 0x100) GEN_INT_ENTRY cbe_maintenance, GEN_REAL EXC_REAL_END(cbe_maintenance, 0x1600, 0x100) EXC_VIRT_NONE(0x5600, 0x100) -TRAMP_KVM_BEGIN(cbe_maintenance_kvm) - GEN_KVM cbe_maintenance EXC_COMMON_BEGIN(cbe_maintenance_common) GEN_COMMON cbe_maintenance bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl cbe_maintenance_exception b ret_from_except + + GEN_KVM cbe_maintenance + #else /* CONFIG_CBE_RAS */ EXC_REAL_NONE(0x1600, 0x100) EXC_VIRT_NONE(0x5600, 0x100)
@@ -2353,8 +2362,6 @@ EXC_REAL_END(altivec_assist, 0x1700, 0x100) EXC_VIRT_BEGIN(altivec_assist, 0x5700, 0x100) GEN_INT_ENTRY altivec_assist, GEN_VIRT EXC_VIRT_END(altivec_assist, 0x5700, 0x100) -TRAMP_KVM_BEGIN(altivec_assist_kvm) - GEN_KVM altivec_assist EXC_COMMON_BEGIN(altivec_assist_common) GEN_COMMON altivec_assist bl save_nvgprs
@@ -2366,6 +2373,8 @@ EXC_COMMON_BEGIN(altivec_assist_common) #endif b ret_from_except + GEN_KVM altivec_assist + #ifdef CONFIG_CBE_RAS INT_DEFINE_BEGIN(cbe_thermal)
@@ -2380,14 +2389,15 @@ EXC_REAL_BEGIN(cbe_thermal, 0x1800, 0x100) GEN_INT_ENTRY cbe_thermal, GEN_REAL EXC_REAL_END(cbe_thermal, 0x1800, 0x100) EXC_VIRT_NONE(0x5800, 0x100) -TRAMP_KVM_BEGIN(cbe_thermal_kvm) - GEN_KVM cbe_thermal EXC_COMMON_BEGIN(cbe_thermal_common) GEN_COMMON cbe_thermal bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl cbe_thermal_exception b ret_from_except + + GEN_KVM cbe_thermal + #else /* CONFIG_CBE_RAS */ EXC_REAL_NONE(0x1800, 0x100) EXC_VIRT_NONE(0x5800, 0x100)
@@ -2581,17 +2591,12 @@ TRAMP_REAL_BEGIN(hrfi_flush_fallback) GET_SCRATCH0(r13); hrfid -/* - * Real mode exceptions actually use this too, but alternate - * instruction code patches (which end up in the common .text area) - * cannot reach these if they are put there. - */ USE_TEXT_SECTION() MASKED_INTERRUPT EXC_STD MASKED_INTERRUPT EXC_HV #ifdef CONFIG_KVM_BOOK3S_64_HANDLER -TRAMP_REAL_BEGIN(kvmppc_skip_interrupt) +kvmppc_skip_interrupt: /* * Here all GPRs are unchanged from when the interrupt happened * except for r13, which is saved in SPRG_SCRATCH0.
@@ -2603,7 +2608,7 @@ TRAMP_REAL_BEGIN(kvmppc_skip_interrupt) RFI_TO_KERNEL b . -TRAMP_REAL_BEGIN(kvmppc_skip_Hinterrupt) +kvmppc_skip_Hinterrupt: /* * Here all GPRs are unchanged from when the interrupt happened * except for r13, which is saved in SPRG_SCRATCH0.
@@ -2616,16 +2621,6 @@ TRAMP_REAL_BEGIN(kvmppc_skip_Hinterrupt) b . #endif -/* - * Ensure that any handlers that get invoked from the exception prologs - * above are below the first 64KB (0x10000) of the kernel image because - * the prologs assemble the addresses of these handlers using the - * LOAD_HANDLER macro, which uses an ori instruction. - */ - -/*** Common interrupt handlers ***/ - - /* * Relocation-on interrupts: A subset of the interrupts can be delivered * with IR=1/DR=1, if AIL==2 and MSR.HV won't be changed by delivering
arch/powerpc/kvm/book3s_hv_rmhandlers.S +0 -11
@@ -1234,7 +1234,6 @@ kvmppc_interrupt_hv: * R12 = (guest CR << 32) | interrupt vector * R13 = PACA * guest R12 saved in shadow VCPU SCRATCH0 - * guest CTR saved in shadow VCPU SCRATCH1 if RELOCATABLE * guest R13 saved in SPRN_SCRATCH0 */ std r9, HSTATE_SCRATCH2(r13)
@@ -1335,12 +1334,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) 11: stw r3,VCPU_HEIR(r9) /* these are volatile across C function calls */ -#ifdef CONFIG_RELOCATABLE - ld r3, HSTATE_SCRATCH1(r13) - mtctr r3 -#else mfctr r3 -#endif mfxer r4 std r3, VCPU_CTR(r9) std r4, VCPU_XER(r9)
@@ -3184,7 +3178,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_P9_TM_HV_ASSIST) * r12 is (CR << 32) | vector * r13 points to our PACA * r12 is saved in HSTATE_SCRATCH0(r13) - * ctr is saved in HSTATE_SCRATCH1(r13) if RELOCATABLE * r9 is saved in HSTATE_SCRATCH2(r13) * r13 is saved in HSPRG1 * cfar is saved in HSTATE_CFAR(r13)
@@ -3233,11 +3226,7 @@ kvmppc_bad_host_intr: ld r5, HSTATE_CFAR(r13) std r5, ORIG_GPR3(r1) mflr r3 -#ifdef CONFIG_RELOCATABLE - ld r4, HSTATE_SCRATCH1(r13) -#else mfctr r4 -#endif mfxer r5 lbz r6, PACAIRQSOFTMASK(r13) std r3, _LINK(r1)
arch/powerpc/kvm/book3s_segment.S +0 -7
@@ -167,16 +167,9 @@ kvmppc_interrupt_pr: * R12 = (guest CR << 32) | exit handler id * R13 = PACA * HSTATE.SCRATCH0 = guest R12 - * HSTATE.SCRATCH1 = guest CTR if RELOCATABLE */ #ifdef CONFIG_PPC64 /* Match 32-bit entry */ -#ifdef CONFIG_RELOCATABLE - std r9, HSTATE_SCRATCH2(r13) - ld r9, HSTATE_SCRATCH1(r13) - mtctr r9 - ld r9, HSTATE_SCRATCH2(r13) -#endif rotldi r12, r12, 32 /* Flip R12 halves for stw */ stw r12, HSTATE_SCRATCH1(r13) /* CR is now in the low half */ srdi r12, r12, 32 /* shift trap into low half */
Signature · 1 line
2.22.0
Nicholas Piggin
reviewerPATCH 5/10 powerpc/64s/exception: remove confusing IEARLY option
In reply to Nicholas PigginReplace IEARLY=1 and IEARLY=2 with IBRANCH_COMMON, which controls if the entry code branches to a common handler; and IREALMODE_COMMON, which controls whether the common handler should remain in real mode.
These special cases no longer avoid loading the SRR registers, there is no point as most of them load the registers immediately anyway.
--- arch/powerpc/kernel/exceptions-64s.S | 48 ++++++++++++++-------------- 1 file changed, 24 insertions(+), 24 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +24 -24
@@ -174,7 +174,8 @@ END_FTR_SECTION_NESTED(ftr,ftr,943) #define IDAR .L_IDAR_\name\() #define IDSISR .L_IDSISR_\name\() #define ISET_RI .L_ISET_RI_\name\() -#define IEARLY .L_IEARLY_\name\() +#define IBRANCH_COMMON .L_IBRANCH_COMMON_\name\() +#define IREALMODE_COMMON .L_IREALMODE_COMMON_\name\() #define IMASK .L_IMASK_\name\() #define IKVM_SKIP .L_IKVM_SKIP_\name\() #define IKVM_REAL .L_IKVM_REAL_\name\()
@@ -218,8 +219,15 @@ do_define_int n .ifndef ISET_RI ISET_RI=1 .endif - .ifndef IEARLY - IEARLY=0 + .ifndef IBRANCH_COMMON + IBRANCH_COMMON=1 + .endif + .ifndef IREALMODE_COMMON + IREALMODE_COMMON=0 + .else + .if ! IBRANCH_COMMON + .error "IREALMODE_COMMON=1 but IBRANCH_COMMON=0" + .endif .endif .ifndef IMASK IMASK=0
@@ -356,6 +364,11 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) #define GEN_OOL 1 .macro GEN_BRANCH_TO_COMMON name virt + .if IREALMODE_COMMON + LOAD_HANDLER(r10, \name\()_common) + mtctr r10 + bctr + .else .if \virt #ifndef CONFIG_RELOCATABLE b \name\()_common_virt
@@ -369,6 +382,7 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) mtctr r10 bctr .endif + .endif .endm .macro GEN_INT_ENTRY name virt ool=0
@@ -424,11 +438,6 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) stw r10,IAREA+EX_DSISR(r13) .endif - .if IEARLY == 2 - /* nothing more */ - .elseif IEARLY - BRANCH_TO_C000(r11, \name\()_common) - .else .if IHSRR == EXC_HV_OR_STD BEGIN_FTR_SECTION mfspr r11,SPRN_HSRR0 /* save HSRR0 */
@@ -444,6 +453,8 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) mfspr r11,SPRN_SRR0 /* save SRR0 */ mfspr r12,SPRN_SRR1 /* and SRR1 */ .endif + + .if IBRANCH_COMMON GEN_BRANCH_TO_COMMON \name \virt .endif
@@ -923,6 +934,7 @@ INT_DEFINE_BEGIN(machine_check_early) IHSRR=EXC_STD IAREA=PACA_EXMC IVIRT=0 /* no virt entry point */ + IREALMODE_COMMON=1 /* * MSR_RI is not enabled, because PACA_EXMC is being used, so a * nested machine check corrupts it. machine_check_common enables
@@ -930,7 +942,6 @@ INT_DEFINE_BEGIN(machine_check_early) */ ISET_RI=0 ISTACK=0 - IEARLY=1 IDAR=1 IDSISR=1 IRECONCILE=0
@@ -971,9 +982,6 @@ TRAMP_REAL_BEGIN(machine_check_fwnmi) EXCEPTION_RESTORE_REGS EXC_STD EXC_COMMON_BEGIN(machine_check_early_common) - mfspr r11,SPRN_SRR0 - mfspr r12,SPRN_SRR1 - /* * Switch to mc_emergency stack and handle re-entrancy (we limit * the nested MCE upto level 4 to avoid stack overflow).
@@ -1849,7 +1857,7 @@ INT_DEFINE_BEGIN(hmi_exception_early) IHSRR=EXC_HV IAREA=PACA_EXGEN IVIRT=0 /* no virt entry point */ - IEARLY=1 + IREALMODE_COMMON=1 ISTACK=0 IRECONCILE=0 IKUAP=0 /* We don't touch AMR here, we never go to virtual mode */
@@ -1871,8 +1879,6 @@ EXC_REAL_END(hmi_exception, 0xe60, 0x20) EXC_VIRT_NONE(0x4e60, 0x20) EXC_COMMON_BEGIN(hmi_exception_early_common) - mfspr r11,SPRN_HSRR0 /* Save HSRR0 */ - mfspr r12,SPRN_HSRR1 /* Save HSRR1 */ mr r10,r1 /* Save r1 */ ld r1,PACAEMERGSP(r13) /* Use emergency stack for realmode */ subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */
@@ -2213,29 +2219,23 @@ INT_DEFINE_BEGIN(denorm_exception) IVEC=0x1500 IHSRR=EXC_HV IAREA=PACA_EXGEN - IEARLY=2 + IBRANCH_COMMON=0 IKVM_REAL=1 INT_DEFINE_END(denorm_exception) EXC_REAL_BEGIN(denorm_exception, 0x1500, 0x100) GEN_INT_ENTRY denorm_exception, GEN_REAL #ifdef CONFIG_PPC_DENORMALISATION - mfspr r10,SPRN_HSRR1 - andis. r10,r10,(HSRR1_DENORM)@h /* denorm? */ + andis. r10,r12,(HSRR1_DENORM)@h /* denorm? */ bne+ denorm_assist #endif - mfspr r11,SPRN_HSRR0 - mfspr r12,SPRN_HSRR1 GEN_BRANCH_TO_COMMON denorm_exception, GEN_REAL EXC_REAL_END(denorm_exception, 0x1500, 0x100) #ifdef CONFIG_PPC_DENORMALISATION EXC_VIRT_BEGIN(denorm_exception, 0x5500, 0x100) GEN_INT_ENTRY denorm_exception, GEN_VIRT - mfspr r10,SPRN_HSRR1 - andis. r10,r10,(HSRR1_DENORM)@h /* denorm? */ + andis. r10,r12,(HSRR1_DENORM)@h /* denorm? */ bne+ denorm_assist - mfspr r11,SPRN_HSRR0 - mfspr r12,SPRN_HSRR1 GEN_BRANCH_TO_COMMON denorm_exception, GEN_VIRT EXC_VIRT_END(denorm_exception, 0x5500, 0x100) #else
Signature · 1 line
2.22.0
Nicholas Piggin
reviewerPATCH 6/10 powerpc/64s/exception: remove the SPR saving patch code macros
In reply to Nicholas PigginThese are used infrequently enough they don't provide much help, so inline them.
--- arch/powerpc/kernel/exceptions-64s.S | 82 ++++++++++------------------ 1 file changed, 28 insertions(+), 54 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +28 -54
@@ -110,46 +110,6 @@ name: #define EXC_HV 1 #define EXC_STD 0 -/* - * PPR save/restore macros used in exceptions-64s.S - * Used for P7 or later processors - */ -#define SAVE_PPR(area, ra) \ -BEGIN_FTR_SECTION_NESTED(940) \ - ld ra,area+EX_PPR(r13); /* Read PPR from paca */ \ - std ra,_PPR(r1); \ -END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,940) - -#define RESTORE_PPR_PACA(area, ra) \ -BEGIN_FTR_SECTION_NESTED(941) \ - ld ra,area+EX_PPR(r13); \ - mtspr SPRN_PPR,ra; \ -END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,941) - -/* - * Get an SPR into a register if the CPU has the given feature - */ -#define OPT_GET_SPR(ra, spr, ftr) \ -BEGIN_FTR_SECTION_NESTED(943) \ - mfspr ra,spr; \ -END_FTR_SECTION_NESTED(ftr,ftr,943) - -/* - * Set an SPR from a register if the CPU has the given feature - */ -#define OPT_SET_SPR(ra, spr, ftr) \ -BEGIN_FTR_SECTION_NESTED(943) \ - mtspr spr,ra; \ -END_FTR_SECTION_NESTED(ftr,ftr,943) - -/* - * Save a register to the PACA if the CPU has the given feature - */ -#define OPT_SAVE_REG_TO_PACA(offset, ra, ftr) \ -BEGIN_FTR_SECTION_NESTED(943) \ - std ra,offset(r13); \ -END_FTR_SECTION_NESTED(ftr,ftr,943) - /* * Branch to label using its 0xC000 address. This results in instruction * address suitable for MSR[IR]=0 or 1, which allows relocation to be turned
@@ -278,18 +238,18 @@ do_define_int n cmpwi r10,KVM_GUEST_MODE_SKIP beq 89f .else -BEGIN_FTR_SECTION_NESTED(947) +BEGIN_FTR_SECTION ld r10,IAREA+EX_CFAR(r13) std r10,HSTATE_CFAR(r13) -END_FTR_SECTION_NESTED(CPU_FTR_CFAR,CPU_FTR_CFAR,947) +END_FTR_SECTION_IFSET(CPU_FTR_CFAR) .endif ld r10,PACA_EXGEN+EX_CTR(r13) mtctr r10 -BEGIN_FTR_SECTION_NESTED(948) +BEGIN_FTR_SECTION ld r10,IAREA+EX_PPR(r13) std r10,HSTATE_PPR(r13) -END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) +END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) ld r11,IAREA+EX_R11(r13) ld r12,IAREA+EX_R12(r13) std r12,HSTATE_SCRATCH0(r13)
@@ -389,10 +349,14 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) SET_SCRATCH0(r13) /* save r13 */ GET_PACA(r13) std r9,IAREA+EX_R9(r13) /* save r9 */ - OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR) +BEGIN_FTR_SECTION + mfspr r9,SPRN_PPR +END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) HMT_MEDIUM std r10,IAREA+EX_R10(r13) /* save r10 - r12 */ - OPT_GET_SPR(r10, SPRN_CFAR, CPU_FTR_CFAR) +BEGIN_FTR_SECTION + mfspr r10,SPRN_CFAR +END_FTR_SECTION_IFSET(CPU_FTR_CFAR) .if \ool .if !\virt b tramp_real_\name
@@ -405,8 +369,12 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) .endif .endif - OPT_SAVE_REG_TO_PACA(IAREA+EX_PPR, r9, CPU_FTR_HAS_PPR) - OPT_SAVE_REG_TO_PACA(IAREA+EX_CFAR, r10, CPU_FTR_CFAR) +BEGIN_FTR_SECTION + std r9,IAREA+EX_PPR(r13) +END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) +BEGIN_FTR_SECTION + std r10,IAREA+EX_CFAR(r13) +END_FTR_SECTION_IFSET(CPU_FTR_CFAR) INTERRUPT_TO_KERNEL mfctr r10 std r10,IAREA+EX_CTR(r13)
@@ -553,7 +521,10 @@ DEFINE_FIXED_SYMBOL(\name\()_common_virt) .endif beq 101f /* if from kernel mode */ ACCOUNT_CPU_USER_ENTRY(r13, r9, r10) - SAVE_PPR(IAREA, r9) +BEGIN_FTR_SECTION + ld r9,IAREA+EX_PPR(r13) /* Read PPR from paca */ + std r9,_PPR(r1) +END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) 101: .else .if IKUAP
@@ -593,10 +564,10 @@ DEFINE_FIXED_SYMBOL(\name\()_common_virt) std r10,_DSISR(r1) .endif -BEGIN_FTR_SECTION_NESTED(66) +BEGIN_FTR_SECTION ld r10,IAREA+EX_CFAR(r13) std r10,ORIG_GPR3(r1) -END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66) +END_FTR_SECTION_IFSET(CPU_FTR_CFAR) ld r10,IAREA+EX_CTR(r13) std r10,_CTR(r1) std r2,GPR2(r1) /* save r2 in stackframe */
@@ -1716,10 +1687,10 @@ TRAMP_REAL_BEGIN(system_call_kvm) * HMT_MEDIUM. That allows the KVM code to save that value into the * guest state (it is the guest's PPR value). */ -BEGIN_FTR_SECTION_NESTED(948) +BEGIN_FTR_SECTION mfspr r10,SPRN_PPR std r10,HSTATE_PPR(r13) -END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) +END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) HMT_MEDIUM mfctr r10 SET_SCRATCH0(r10)
@@ -2298,7 +2269,10 @@ denorm_done: mtspr SPRN_HSRR0,r11 mtcrf 0x80,r9 ld r9,PACA_EXGEN+EX_R9(r13) - RESTORE_PPR_PACA(PACA_EXGEN, r10) +BEGIN_FTR_SECTION + ld r10,PACA_EXGEN+EX_PPR(r13) + mtspr SPRN_PPR,r10 +END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) BEGIN_FTR_SECTION ld r10,PACA_EXGEN+EX_CFAR(r13) mtspr SPRN_CFAR,r10
Signature · 1 line
2.22.0
Nicholas Piggin
reviewerPATCH 7/10 powerpc/64s/exception: trim unused arguments from KVMTEST macro
In reply to Nicholas Piggin--- arch/powerpc/kernel/exceptions-64s.S | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +5 -5
@@ -224,7 +224,7 @@ do_define_int n #define kvmppc_interrupt kvmppc_interrupt_pr #endif -.macro KVMTEST name, hsrr, n +.macro KVMTEST name lbz r10,HSTATE_IN_GUEST(r13) cmpwi r10,0 bne \name\()_kvm
@@ -293,7 +293,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) .endm #else -.macro KVMTEST name, hsrr, n +.macro KVMTEST name .endm .macro GEN_KVM name .endm
@@ -440,7 +440,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR) DEFINE_FIXED_SYMBOL(\name\()_common_real) \name\()_common_real: .if IKVM_REAL - KVMTEST \name IHSRR IVEC + KVMTEST \name .endif ld r10,PACAKMSR(r13) /* get MSR value for kernel */
@@ -455,7 +455,7 @@ DEFINE_FIXED_SYMBOL(\name\()_common_real) DEFINE_FIXED_SYMBOL(\name\()_common_virt) \name\()_common_virt: .if IKVM_VIRT - KVMTEST \name IHSRR IVEC + KVMTEST \name .endif .if ISET_RI
@@ -1615,7 +1615,7 @@ INT_DEFINE_END(system_call) GET_PACA(r13) std r10,PACA_EXGEN+EX_R10(r13) INTERRUPT_TO_KERNEL - KVMTEST system_call EXC_STD 0xc00 /* uses r10, branch to system_call_kvm */ + KVMTEST system_call /* uses r10, branch to system_call_kvm */ mfctr r9 #else mr r9,r13
Signature · 1 line
2.22.0
Nicholas Piggin
reviewerPATCH 8/10 powerpc/64s/exception: hdecrementer avoid touching the stack
In reply to Nicholas PigginThe hdec interrupt handler is reported to sometimes fire in Linux if KVM leaves it pending after a guest exists. This is harmless, so there is a no-op handler for it.
The interrupt handler currently uses the regular kernel stack. Change this to avoid touching the stack entirely.
This should be the last place where the regular Linux stack can be accessed with asynchronous interrupts (including PMI) soft-masked. It might be possible to take advantage of this invariant, e.g., to context switch the kernel stack SLB entry without clearing MSR[EE].
--- arch/powerpc/include/asm/time.h | 1 - arch/powerpc/kernel/exceptions-64s.S | 25 ++++++++++++++++++++----- arch/powerpc/kernel/time.c | 9 --------- 3 files changed, 20 insertions(+), 15 deletions(-)
arch/powerpc/include/asm/time.h +0 -1
@@ -24,7 +24,6 @@ extern struct clock_event_device decrementer_clockevent;extern void generic_calibrate_decr (void ); -extern void hdec_interrupt (struct pt_regs *regs);/* Some sane defaults: 125 MHz timebase, 1GHz processor */ extern unsigned long ppc_proc_freq;
arch/powerpc/kernel/exceptions-64s.S +20 -5
@@ -1505,6 +1505,8 @@ INT_DEFINE_BEGIN(hdecrementer) IVEC=0x980 IHSRR=EXC_HV IAREA=PACA_EXGEN + ISTACK=0 + IRECONCILE=0 IKVM_REAL=1 IKVM_VIRT=1 INT_DEFINE_END(hdecrementer)
@@ -1516,11 +1518,24 @@ EXC_VIRT_BEGIN(hdecrementer, 0x4980, 0x80) GEN_INT_ENTRY hdecrementer, GEN_VIRT EXC_VIRT_END(hdecrementer, 0x4980, 0x80) EXC_COMMON_BEGIN(hdecrementer_common) - GEN_COMMON hdecrementer - bl save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - bl hdec_interrupt - b ret_from_except + __GEN_COMMON_ENTRY hdecrementer + /* + * Hypervisor decrementer interrupts not caught by the KVM test + * shouldn't occur but are sometimes left pending on exit from a KVM + * guest. We don't need to do anything to clear them, as they are + * edge-triggered. + * + * Be careful to avoid touching the kernel stack. + */ + ld r10,PACA_EXGEN+EX_CTR(r13) + mtctr r10 + mtcrf 0x80,r9 + ld r9,PACA_EXGEN+EX_R9(r13) + ld r10,PACA_EXGEN+EX_R10(r13) + ld r11,PACA_EXGEN+EX_R11(r13) + ld r12,PACA_EXGEN+EX_R12(r13) + ld r13,PACA_EXGEN+EX_R13(r13) + HRFI_TO_KERNEL GEN_KVM hdecrementer
arch/powerpc/kernel/time.c +0 -9
@@ -663,15 +663,6 @@ void timer_broadcast_interrupt(void) }#endif -/* -* Hypervisor decrementer interrupts shouldn't occur but are sometimes -* left pending on exit from a KVM guest. We don't need to do anything -* to clear them, as they are edge-triggered. -*/ -void hdec_interrupt (struct pt_regs *regs) -{ -} -#ifdef CONFIG_SUSPEND static void generic_suspend_disable_irqs (void ) {
Signature · 1 line
2.22.0
Nicholas Piggin
reviewerPATCH 9/10 powerpc/64s/exception: re-inline some handlers
In reply to Nicholas PigginThe reduction in interrupt entry size allows some handlers to be re-inlined.
--- arch/powerpc/kernel/exceptions-64s.S | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +3 -3
@@ -1187,7 +1187,7 @@ INT_DEFINE_BEGIN(data_access) INT_DEFINE_END(data_access) EXC_REAL_BEGIN(data_access, 0x300, 0x80) - GEN_INT_ENTRY data_access, GEN_REAL, GEN_OOL + GEN_INT_ENTRY data_access, GEN_REAL EXC_REAL_END(data_access, 0x300, 0x80) EXC_VIRT_BEGIN(data_access, 0x4300, 0x80) GEN_INT_ENTRY data_access, GEN_VIRT
@@ -1218,7 +1218,7 @@ INT_DEFINE_BEGIN(data_access_slb) INT_DEFINE_END(data_access_slb) EXC_REAL_BEGIN(data_access_slb, 0x380, 0x80) - GEN_INT_ENTRY data_access_slb, GEN_REAL, GEN_OOL + GEN_INT_ENTRY data_access_slb, GEN_REAL EXC_REAL_END(data_access_slb, 0x380, 0x80) EXC_VIRT_BEGIN(data_access_slb, 0x4380, 0x80) GEN_INT_ENTRY data_access_slb, GEN_VIRT
@@ -1485,7 +1485,7 @@ INT_DEFINE_BEGIN(decrementer) INT_DEFINE_END(decrementer) EXC_REAL_BEGIN(decrementer, 0x900, 0x80) - GEN_INT_ENTRY decrementer, GEN_REAL, GEN_OOL + GEN_INT_ENTRY decrementer, GEN_REAL EXC_REAL_END(decrementer, 0x900, 0x80) EXC_VIRT_BEGIN(decrementer, 0x4900, 0x80) GEN_INT_ENTRY decrementer, GEN_VIRT
Signature · 1 line
2.22.0
Nicholas Piggin
reviewerPATCH 10/10 powerpc/64s/exception: add more comments for interrupt handlers
In reply to Nicholas PigginA few of the non-standard handlers are left uncommented. Some more description could be added to some.
--- arch/powerpc/kernel/exceptions-64s.S | 408 ++++++++++++++++++++++++--- 1 file changed, 369 insertions(+), 39 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +369 -39
@@ -126,25 +126,25 @@ name: /* * Interrupt code generation macros */ -#define IVEC .L_IVEC_\name\() -#define IHSRR .L_IHSRR_\name\() -#define IAREA .L_IAREA_\name\() -#define IVIRT .L_IVIRT_\name\() -#define IISIDE .L_IISIDE_\name\() -#define IDAR .L_IDAR_\name\() -#define IDSISR .L_IDSISR_\name\() -#define ISET_RI .L_ISET_RI_\name\() -#define IBRANCH_COMMON .L_IBRANCH_COMMON_\name\() -#define IREALMODE_COMMON .L_IREALMODE_COMMON_\name\() -#define IMASK .L_IMASK_\name\() -#define IKVM_SKIP .L_IKVM_SKIP_\name\() -#define IKVM_REAL .L_IKVM_REAL_\name\() +#define IVEC .L_IVEC_\name\() /* Interrupt vector address */ +#define IHSRR .L_IHSRR_\name\() /* Sets SRR or HSRR registers */ +#define IAREA .L_IAREA_\name\() /* PACA save area */ +#define IVIRT .L_IVIRT_\name\() /* Has virt mode entry point */ +#define IISIDE .L_IISIDE_\name\() /* Uses SRR0/1 not DAR/DSISR */ +#define IDAR .L_IDAR_\name\() /* Uses DAR (or SRR0) */ +#define IDSISR .L_IDSISR_\name\() /* Uses DSISR (or SRR1) */ +#define ISET_RI .L_ISET_RI_\name\() /* Run common code w/ MSR[RI]=1 */ +#define IBRANCH_COMMON .L_IBRANCH_COMMON_\name\() /* ENTRY branch to common */ +#define IREALMODE_COMMON .L_IREALMODE_COMMON_\name\() /* Common runs in realmode */ +#define IMASK .L_IMASK_\name\() /* IRQ soft-mask bit */ +#define IKVM_SKIP .L_IKVM_SKIP_\name\() /* Generate KVM skip handler */ +#define IKVM_REAL .L_IKVM_REAL_\name\() /* Real entry tests KVM */ #define __IKVM_REAL(name) .L_IKVM_REAL_ ## name -#define IKVM_VIRT .L_IKVM_VIRT_\name\() -#define ISTACK .L_ISTACK_\name\() +#define IKVM_VIRT .L_IKVM_VIRT_\name\() /* Virt entry tests KVM */ +#define ISTACK .L_ISTACK_\name\() /* Set regular kernel stack */ #define __ISTACK(name) .L_ISTACK_ ## name -#define IRECONCILE .L_IRECONCILE_\name\() -#define IKUAP .L_IKUAP_\name\() +#define IRECONCILE .L_IRECONCILE_\name\() /* Do RECONCILE_IRQ_STATE */ +#define IKUAP .L_IKUAP_\name\() /* Do KUAP lock */ #define INT_DEFINE_BEGIN(n) \ .macro int_define_ ## n name
@@ -215,6 +215,20 @@ do_define_int n #ifdef CONFIG_KVM_BOOK3S_64_HANDLER #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE /* + * All interrupts which set HSRR registers (EXC_HV) as well as SRESET and + * MCE and syscall when invoked with "sc 1" switch to the hypervisor to + * be taken, so all generally need to test whether they were taken in guest + * context. + * + * SRESET and MCE may also be sent to the guest by the hypervisor. + * + * Interrupts which set SRR registers except SRESET and MCE and sc 1 are not + * elevated to the hypervisor, though many can be taken when running in + * hypervisor mode (e.g., bare metal kernel and userspace). These generally + * need to test whether taken in guest context for PR KVM guests. PR KVM + * does not enable AIL interrupts, so always takes them in real mode, which + * is why these generally only need test the real-mode case. + * * If hv is possible, interrupts come into to the hv version * of the kvmppc_interrupt code, which then jumps to the PR handler, * kvmppc_interrupt_pr, if the guest is a PR guest.
@@ -758,6 +772,39 @@ __start_interrupts: EXC_VIRT_NONE(0x4000, 0x100) +/** + * Interrupt 0x100 - System Reset Interrupt (SRESET aka NMI). + * This is a non-maskable, asynchronous interrupt always taken in real-mode. + * It is caused by: + * - Wake from power-saving state, on powernv. + * - An NMI from another CPU, triggered by firmware or hypercall. + * - As crash/debug signal injected from BMC, firmware or hypervisor. + * + * Handling: + * Power-save wakeup is the only performance critical path, so this is + * determined quickly as possible first. In this case volatile registers + * can be discarded and SPRs like CFAR don't need to be read. + * + * If not a powersave wakeup, then it's run as a regular interrupt, however + * it uses its own stack and PACA save area to preserve the regular kernel + * environment for debugging. + * + * This interrupt is not maskable, so triggering it when MSR[RI] is clear, + * or SCRATCH0 is in use, etc. may cause a crash. It's also not entirely + * correct to switch to virtual mode to run the regular interrupt handler + * because it might be interrupted when the MMU is in a bad state (e.g., SLB + * is clear). + * + * FWNMI: + * PAPR specifies a "fwnmi" facility which sends the sreset to a different + * entry point with a different register set up. Some hypervisors will + * send the sreset to 0x100 in the guest if it is not fwnmi capable. + * + * KVM: + * Unlike most EXC_STD interrupts, this may be taken by the host while + * executing in a guest, so a KVM test is required. KVM will pull the CPU out + * of guest mode and then raise the sreset. + */ INT_DEFINE_BEGIN(system_reset) IVEC=0x100 IHSRR=EXC_STD
@@ -834,6 +881,7 @@ TRAMP_REAL_BEGIN(system_reset_idle_wake) * Vectors for the FWNMI option. Share common code. */ TRAMP_REAL_BEGIN(system_reset_fwnmi) + /* XXX: fwnmi guest could run a nested/PR guest, so why no test? */ __IKVM_REAL(system_reset)=0 GEN_INT_ENTRY system_reset, GEN_REAL
@@ -900,6 +948,44 @@ EXC_COMMON_BEGIN(system_reset_common) GEN_KVM system_reset +/** + * Interrupt 0x200 - Machine Check Interrupt (MCE). + * This is a non-maskable interrupt always taken in real-mode. It can be + * synchronous or asynchronous, caused by hardware or software, and it may be + * taken in a power-saving state. + * + * Handling: + * Similarly to system reset, this uses its own stack and PACA save area, + * the difference is re-entrancy is allowed on the machine check stack. + * + * machine_check_early is run in real mode, and carefully decodes the + * machine check and tries to handle it (e.g., flush the SLB if there was an + * error detected there), determines if it was recoverable and logs the + * event. + * + * Then, depending on the execution context when the interrupt is taken, there + * are 3 main actions: + * - Executing in kernel mode. The event is queued with irq_work, which means + * it is handled when it is next safe to do so (i.e., the kernel has enabled + * interrupts), which could be immediately when the interrupt returns. This + * avoids nasty issues like switching to virtual mode when the MMU is in a + * bad state, or when executing OPAL code. (SRESET is exposed to such issues, + * but it has different priorities). Check to see if the CPU was in power + * save, and return via the wake up code if it was. + * + * - Executing in user mode. machine_check_exception is run like a normal + * interrupt handler, which processes the data generated by the early handler. + * + * - Executing in guest mode. The interrupt is run with its KVM test, and + * branches to KVM to deal with. KVM may queue the event for the host + * to report later. + * + * This interrupt is not maskable, so if it triggers when MSR[RI] is clear, + * or SCRATCH0 is in use, it may cause a crash. + * + * KVM: + * See SRESET. + */ INT_DEFINE_BEGIN(machine_check_early) IVEC=0x200 IHSRR=EXC_STD
@@ -1162,19 +1248,28 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) /** - * 0x300 - Data Storage Interrupt (DSI) - * This interrupt is generated due to a data access which does not have a valid - * page table entry with permissions to allow the data access to be performed. - * DAWR matches also fault here, as do RC updates, and minor misc errors e.g., - * copy/paste, AMO, certain invalid CI accesses, etc. + * Interrupt 0x300 - Data Storage Interrupt (DSI). + * This is a synchronous interrupt generated due to a data access exception, + * e.g., a load orstore which does not have a valid page table entry with + * permissions. DAWR matches also fault here, as do RC updates, and minor misc + * errors e.g., copy/paste, AMO, certain invalid CI accesses, etc. + * + * Handling: + * - Hash MMU + * Go to do_hash_page first to see if the HPT can be filled from an entry in + * the Linux page table. Hash faults can hit in kernel mode in a fairly + * arbitrary state (e.g., interrupts disabled, locks held) when accessing + * "non-bolted" regions, e.g., vmalloc space. However these should always be + * backed by Linux page tables. * - * This interrupt is delivered to the guest (HV bit unchanged). + * If none is found, do a Linux page fault. Linux page faults can happen in + * kernel mode due to user copy operations of course. * - * Linux HPT responds by first attempting to refill the hash table from the - * Linux page table, then going to a full page fault if the Linux page table - * entry was insufficient. RPT goes straight to full page fault. + * - Radix MMU + * The hardware loads from the Linux page table directly, so a fault goes + * immediately to Linux page fault. * - * PR KVM ...? + * Conditions like DAWR match are handled on the way in to Linux page fault. */ INT_DEFINE_BEGIN(data_access) IVEC=0x300
@@ -1207,6 +1302,24 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) GEN_KVM data_access +/** + * Interrupt 0x380 - Data Segment Interrupt (DSLB). + * This is a synchronous interrupt in response to an MMU fault missing SLB + * entry for HPT, or an address outside RPT translation range. + * + * Handling: + * - HPT: + * This refills the SLB, or reports an access fault similarly to a bad page + * fault. When coming from user-mode, the SLB handler may access any kernel + * data, though it may itself take a DSLB. When coming from kernel mode, + * recursive faults must be avoided so access is restricted to the kernel + * image text/data, kernel stack, and any data allocated below + * ppc64_bolted_size (first segment). The kernel handler must avoid stomping + * on user-handler data structures. + * + * A dedicated save area EXSLB is used (XXX: but it actually need not be + * these days, we could use EXGEN). + */ INT_DEFINE_BEGIN(data_access_slb) IVEC=0x380 IHSRR=EXC_STD
@@ -1250,6 +1363,15 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) GEN_KVM data_access_slb +/** + * Interrupt 0x400 - Instruction Storage Interrupt (ISI). + * This is a synchronous interrupt in response to an MMU fault due to an + * instruction fetch. + * + * Handling: + * Similar to DSI, though in response to fetch. The faulting address is found + * in SRR0 (rather than DAR), and status in SRR1 (rather than DSISR). + */ INT_DEFINE_BEGIN(instruction_access) IVEC=0x400 IHSRR=EXC_STD
@@ -1281,6 +1403,15 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) GEN_KVM instruction_access +/** + * Interrupt 0x480 - Instruction Segment Interrupt (ISLB). + * This is a synchronous interrupt in response to an MMU fault due to an + * instruction fetch. + * + * Handling: + * Similar to DSLB, though in response to fetch. The faulting address is found + * in SRR0 (rather than DAR). + */ INT_DEFINE_BEGIN(instruction_access_slb) IVEC=0x480 IHSRR=EXC_STD
@@ -1324,6 +1455,29 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) GEN_KVM instruction_access_slb +/** + * Interrupt 0x500 - External Interrupt. + * This is an asynchronous maskable interrupt in response to an "external + * exception" from the interrupt controller or hypervisor (e.g., device + * interrupt). It is maskable in hardware by clearing MSR[EE], and + * soft-maskable with IRQS_DISABLED mask (i.e., local_irq_disable()). + * + * When running in HV mode, Linux sets up the LPCR[LPES] bit such that + * interrupts are delivered with HSRR registers, guests use SRRs, which + * reqiures EXC_HV_OR_STD. + * + * On bare metal POWER9 and later, Linux sets the LPCR[HVICE] bit such that + * external interrupts are delivered as Hypervisor Virtualization Interrupts + * rather than External Interrupts. + * + * Handling: + * This calls into Linux IRQ handler. NVGPRs are not saved to reduce overhead, + * because registers at the time of the interrupt are not so important as it is + * asynchronous. + * + * If soft masked, the masked handler will note the pending interrupt for + * replay, and clear MSR[EE] in the interrupted context. + */ INT_DEFINE_BEGIN(hardware_interrupt) IVEC=0x500 IHSRR=EXC_HV_OR_STD
@@ -1350,6 +1504,10 @@ EXC_COMMON_BEGIN(hardware_interrupt_common) GEN_KVM hardware_interrupt +/** + * Interrupt 0x600 - Alignment Interrupt + * This is a synchronous interrupt in response to data alignment fault. + */ INT_DEFINE_BEGIN(alignment) IVEC=0x600 IHSRR=EXC_STD
@@ -1375,6 +1533,15 @@ EXC_COMMON_BEGIN(alignment_common) GEN_KVM alignment +/** + * Interrupt 0x700 - Program Interrupt (program check). + * This is a synchronous interrupt in response to various instruction faults: + * traps, privilege errors, TM errors, floating point exceptions. + * + * Handling: + * This interrupt may use the "emergency stack" in some cases when being taken + * from kernel context, which complicates handling. + */ INT_DEFINE_BEGIN(program_check) IVEC=0x700 IHSRR=EXC_STD
@@ -1430,6 +1597,15 @@ EXC_COMMON_BEGIN(program_check_common) GEN_KVM program_check +/* + * Interrupt 0x800 - Floating-Point Unavailable Interrupt. + * This is a synchronous interrupt in response to executing an fp instruction + * with MSR[FP]=0. + * + * Handling: + * This will load FP registers and enable the FP bit if coming from userspace, + * otherwise report a bad kernel use of FP. + */ INT_DEFINE_BEGIN(fp_unavailable) IVEC=0x800 IHSRR=EXC_STD
@@ -1476,6 +1652,23 @@ END_FTR_SECTION_IFSET(CPU_FTR_TM) GEN_KVM fp_unavailable +/** + * Interrupt 0x900 - Decrementer Interrupt. + * This is an asynchronous interrupt in response to a decrementer exception + * (e.g., DEC has wrapped below zero). It is maskable in hardware by clearing + * MSR[EE], and soft-maskable with IRQS_DISABLED mask (i.e., + * local_irq_disable()). + * + * Handling: + * This calls into Linux timer handler. NVGPRs are not saved (see 0x500). + * + * If soft masked, the masked handler will note the pending interrupt for + * replay, and bump the decrementer to a high value, leaving MSR[EE] enabled + * in the interrupted context. + * If PPC_WATCHDOG is configured, the soft masked handler will actually set + * things back up to run soft_nmi_interrupt as a regular interrupt handler + * on the emergency stack. + */ INT_DEFINE_BEGIN(decrementer) IVEC=0x900 IHSRR=EXC_STD
@@ -1501,6 +1694,16 @@ EXC_COMMON_BEGIN(decrementer_common) GEN_KVM decrementer +/** + * Interrupt 0x980 - Hypervisor Decrementer Interrupt. + * This is an asynchronous interrupt, similar to 0x900 but for the HDEC + * register. + * + * Handling: + * Linux does not use this outside KVM where it's used to keep a host timer + * while the guest is given control of DEC. It should normally be caught by + * the KVM test and routed there. + */ INT_DEFINE_BEGIN(hdecrementer) IVEC=0x980 IHSRR=EXC_HV
@@ -1540,6 +1743,20 @@ EXC_COMMON_BEGIN(hdecrementer_common) GEN_KVM hdecrementer +/** + * Interrupt 0xa00 - Directed Privileged Doorbell Interrupt. + * This is an asynchronous interrupt in response to a msgsndp doorbell. + * It is maskable in hardware by clearing MSR[EE], and soft-maskable with + * IRQS_DISABLED mask (i.e., local_irq_disable()). + * + * Handling: + * Guests may use this for IPIs between threads in a core if the + * hypervisor supports it. NVGPRS are not saved (see 0x500). + * + * If soft masked, the masked handler will note the pending interrupt for + * replay, leaving MSR[EE] enabled in the interrupted context because the + * doorbells are edge triggered. + */ INT_DEFINE_BEGIN(doorbell_super) IVEC=0xa00 IHSRR=EXC_STD
@@ -1572,18 +1789,23 @@ EXC_COMMON_BEGIN(doorbell_super_common) EXC_REAL_NONE(0xb00, 0x100) EXC_VIRT_NONE(0x4b00, 0x100) -/* - * system call / hypercall (0xc00, 0x4c00) - * - * The system call exception is invoked with "sc 0" and does not alter HV bit. - * There is support for kernel code to invoke system calls but there are no - * in-tree users. - * - * The hypercall is invoked with "sc 1" and sets HV=1. +/** + * Interrupt 0xc00 - System Call Interrupt (syscall, hcall). + * This is a synchronous interrupt invoked with the "sc" instruction. The + * sc 0 does not alter the HV mode so it goes to the currently running OS + * and is used for system calls. sc 1 elevates to hypervisor and is used for + * hypercalls from guest. * * In HPT, sc 1 always goes to 0xc00 real mode. In RADIX, sc 1 can go to * 0x4c00 virtual mode. * + * Handling: + * If the KVM test fires then it was due to a hypercall and is accordingly + * routed to KVM. Otherwise this executes a normal Linux system call. + * + * There is support for kernel code to invoke system calls but there are no + * in-tree users. + * * Call convention: * * syscall register convention is in Documentation/powerpc/syscall64-abi.rst
@@ -1729,6 +1951,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) #endif +/** + * Interrupt 0xd00 - Trace Interrupt. + * This is a synchronous interrupt in response to instruction step or + * breakpoint faults. + */ INT_DEFINE_BEGIN(single_step) IVEC=0xd00 IHSRR=EXC_STD
@@ -1752,6 +1979,18 @@ EXC_COMMON_BEGIN(single_step_common) GEN_KVM single_step +/** + * Interrupt 0xe00 - Hypervisor Data Storage Interrupt (HDSI). + * This is a synchronous interrupt in response to an MMU fault caused by a + * guest data access. + * + * Handling: + * This should always get routed to KVM. In radix MMU mode, this is caused + * by a guest nested radix access that can't be performed due to the + * partition scope page table. In hash mode, this can be caused by guests + * running with translation disabled (virtual real mode) or with VPM enabled. + * KVM will update the page table structures or disallow the access. + */ INT_DEFINE_BEGIN(h_data_storage) IVEC=0xe00 IHSRR=EXC_HV
@@ -1785,6 +2024,11 @@ ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_TYPE_RADIX) GEN_KVM h_data_storage +/** + * Interrupt 0xe20 - Hypervisor Instruction Storage Interrupt (HISI). + * This is a synchronous interrupt in response to an MMU fault caused by a + * guest instruction fetch, similar to HDSI. + */ INT_DEFINE_BEGIN(h_instr_storage) IVEC=0xe20 IHSRR=EXC_HV
@@ -1809,6 +2053,9 @@ EXC_COMMON_BEGIN(h_instr_storage_common) GEN_KVM h_instr_storage +/** + * Interrupt 0xe40 - Hypervisor Emulation Assistance Interrupt. + */ INT_DEFINE_BEGIN(emulation_assist) IVEC=0xe40 IHSRR=EXC_HV
@@ -1833,10 +2080,29 @@ EXC_COMMON_BEGIN(emulation_assist_common) GEN_KVM emulation_assist -/* - * hmi_exception trampoline is a special case. It jumps to hmi_exception_early - * first, and then eventaully from there to the trampoline to get into virtual - * mode. +/** + * Interrupt 0xe60 - Hypervisor Maintenance Interrupt (HMI). + * This is an asynchronous interrupt caused by a Hypervisor Maintenance + * Exception. It is always taken in real mode but uses HSRR registers + * unlike SRESET and MCE. + * + * It is maskable in hardware by clearing MSR[EE], and partially soft-maskable + * with IRQS_DISABLED mask (i.e., local_irq_disable()). + * + * Handling: + * This is a special case, this is handled similarly to machine checks, with an + * initial real mode handler that is not soft-masked, which attempts to fix the + * problem. Then a regular handler which is soft-maskable and reports the + * problem. + * + * The emergency stack is used for the early real mode handler. + * + * XXX: unclear why MCE and HMI schemes could not be made common, e.g., + * either use soft-masking for the MCE, or use irq_work for the HMI. + * + * KVM: + * Unlike MCE, this calls into KVM without calling the real mode handler + * first. */ INT_DEFINE_BEGIN(hmi_exception_early) IVEC=0xe60
@@ -1901,6 +2167,11 @@ EXC_COMMON_BEGIN(hmi_exception_common) GEN_KVM hmi_exception +/** + * Interrupt 0xe80 - Directed Hypervisor Doorbell Interrupt. + * This is an asynchronous interrupt in response to a msgsnd doorbell. + * Similar to the 0xa00 doorbell but for host rather than guest. + */ INT_DEFINE_BEGIN(h_doorbell) IVEC=0xe80 IHSRR=EXC_HV
@@ -1931,6 +2202,11 @@ EXC_COMMON_BEGIN(h_doorbell_common) GEN_KVM h_doorbell +/** + * Interrupt 0xea0 - Hypervisor Virtualization Interrupt. + * This is an asynchronous interrupt in response to an "external exception". + * Similar to 0x500 but for host only. + */ INT_DEFINE_BEGIN(h_virt_irq) IVEC=0xea0 IHSRR=EXC_HV
@@ -1963,6 +2239,22 @@ EXC_REAL_NONE(0xee0, 0x20) EXC_VIRT_NONE(0x4ee0, 0x20) +/* + * Interrupt 0xf00 - Performance Monitor Interrupt (PMI, PMU). + * This is an asynchronous interrupt in response to a PMU exception. + * It is maskable in hardware by clearing MSR[EE], and soft-maskable with + * IRQS_PMI_DISABLED mask (NOTE: NOT local_irq_disable()). + * + * Handling: + * This calls into the perf subsystem. + * + * Like the watchdog soft-nmi, it appears an NMI interrupt to Linux, in that it + * runs under local_irq_disable. However it may be soft-masked in + * powerpc-specific code. + * + * If soft masked, the masked handler will note the pending interrupt for + * replay, and clear MSR[EE] in the interrupted context. + */ INT_DEFINE_BEGIN(performance_monitor) IVEC=0xf00 IHSRR=EXC_STD
@@ -1988,6 +2280,12 @@ EXC_COMMON_BEGIN(performance_monitor_common) GEN_KVM performance_monitor +/** + * Interrupt 0xf20 - Vector Unavailable Interrupt. + * This is a synchronous interrupt in response to + * executing a vector (or altivec) instruction with MSR[VEC]=0. + * Similar to FP unavailable. + */ INT_DEFINE_BEGIN(altivec_unavailable) IVEC=0xf20 IHSRR=EXC_STD
@@ -2038,6 +2336,12 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) GEN_KVM altivec_unavailable +/** + * Interrupt 0xf40 - VSX Unavailable Interrupt. + * This is a synchronous interrupt in response to + * executing a VSX instruction with MSR[VSX]=0. + * Similar to FP unavailable. + */ INT_DEFINE_BEGIN(vsx_unavailable) IVEC=0xf40 IHSRR=EXC_STD
@@ -2087,6 +2391,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX) GEN_KVM vsx_unavailable +/** + * Interrupt 0xf60 - Facility Unavailable Interrupt. + * This is a synchronous interrupt in response to + * executing an instruction without access to the facility that can be + * resolved by the OS (e.g., FSCR, MSR). + * Similar to FP unavailable. + */ INT_DEFINE_BEGIN(facility_unavailable) IVEC=0xf60 IHSRR=EXC_STD
@@ -2110,6 +2421,13 @@ EXC_COMMON_BEGIN(facility_unavailable_common) GEN_KVM facility_unavailable +/** + * Interrupt 0xf60 - Hypervisor Facility Unavailable Interrupt. + * This is a synchronous interrupt in response to + * executing an instruction without access to the facility that can only + * be resolved in HV mode (e.g., HFSCR). + * Similar to FP unavailable. + */ INT_DEFINE_BEGIN(h_facility_unavailable) IVEC=0xf80 IHSRR=EXC_HV
@@ -2201,6 +2519,18 @@ EXC_COMMON_BEGIN(instruction_breakpoint_common) EXC_REAL_NONE(0x1400, 0x100) EXC_VIRT_NONE(0x5400, 0x100) +/** + * Interrupt 0x1500 - Soft Patch Interrupt + * + * Handling: + * This is an implementation specific interrupt which can be used for a + * range of exceptions. + * + * This interrupt handler is unique in that it runs the denormal assist + * code even for guests (and even in guest context) without going to KVM, + * for speed. POWER9 does not raise denorm exceptions, so this special case + * could be phased out in future to reduce special cases. + */ INT_DEFINE_BEGIN(denorm_exception) IVEC=0x1500 IHSRR=EXC_HV
Signature · 1 line
2.22.0