dt-bindings: vendor-prefixes: Add Anvo-Systems
Subsystems (3)
Krzysztof Kozlowski
maintainerPATCH v7 1/4 dt-bindings: vendor-prefixes: Add Anvo-Systems
Add vendor prefix for Anvo-Systems Dresden GmbH.
---
Changes since v4:
None
Changes since v3:
1. Add Rob's tag,
2. Remove Admatec (not needed anymore).
Changes since v2:
1. Use admatecde vendor prefix.
2. Add Anvo-Systems Dresden GmbH.
Changes since v1:
New patch
--- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -81,6 +81,8 @@ patternProperties: description: Analogix Semiconductor, Inc. "^andestech,.*": description: Andes Technology Corporation + "^anvo,.*": + description: Anvo-Systems Dresden GmbH "^apm,.*": description: Applied Micro Circuits Corporation (APM) "^aptina,.*":
Signature · 1 line
2.17.1
Krzysztof Kozlowski
maintainerPATCH v7 2/4 dt-bindings: eeprom: at25: Add Anvo ANV32E61W
Document the compatible for ANV32E61W 64kb Serial SPI non-volatile SRAM. Although it is a SRAM device, it can be accessed through EEPROM interface. At least until there is no proper SRAM driver support for it.
---
Changes since v5:
1. None
Changes since v4:
1. Update commit msg.
--- Documentation/devicetree/bindings/eeprom/at25.txt | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/eeprom/at25.txt +1 -0
@@ -3,6 +3,7 @@ EEPROMs (SPI) compatible with Atmel at25. Required properties: - compatible : Should be "<vendor>,<type>", and generic value "atmel,at25". Example "<vendor>,<type>" values: + "anvo,anv32e61w" "microchip,25lc040" "st,m95m02" "st,m95256"
Signature · 1 line
2.17.1
Krzysztof Kozlowski
maintainerPATCH v7 3/4 dt-bindings: arm: fsl: Add Kontron i.MX6UL N6310 compatibles
In reply to Krzysztof KozlowskiAdd the compatibles for Kontron i.MX6UL N6310 SoM and boards.
---
Changes since v6:
1. Split entries to pass the dtbs_check.
Changes since v5:
New patch
--- Documentation/devicetree/bindings/arm/fsl.yaml | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
Documentation/devicetree/bindings/arm/fsl.yaml +14 -0
@@ -161,6 +161,20 @@ properties: items: - enum: - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board + - kontron,imx6ul-n6310-som # Kontron N6310 SOM + - const: fsl,imx6ul + + - description: Kontron N6310 S Board + items: + - const: kontron,imx6ul-n6310-s + - const: kontron,imx6ul-n6310-som + - const: fsl,imx6ul + + - description: Kontron N6310 S 43 Board + items: + - const: kontron,imx6ul-n6310-s-43 + - const: kontron,imx6ul-n6310-s + - const: kontron,imx6ul-n6310-som - const: fsl,imx6ul - description: i.MX6ULL based Boards
Signature · 1 line
2.17.1
Re: [PATCH v7 3/4] dt-bindings: arm: fsl: Add Kontron i.MX6UL N6310 compatibles
Quoted 7 lines · Krzysztof Kozlowski
Add the compatibles for Kontron i.MX6UL N6310 SoM and boards.
Signed-off-by Krzysztof Kozlowski <[email protected]>---
Quoted 8 lines
Changes since v6:
1. Split entries to pass thedtbs_check.Changes since v5:
New patch--- Documentation/devicetree/bindings/arm/fsl.yaml | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
Krzysztof Kozlowski
maintainerPATCH v7 4/4 ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards
In reply to Krzysztof KozlowskiAdd support for i.MX6UL modules from Kontron Electronics GmbH (before
acquisition: Exceet Electronics) and evalkit boards based on it:
1. N6310 SOM: i.MX6 UL System-on-Module, a 25x25 mm solderable module (LGA pads and pin castellations) with 256 MB RAM, 1 MB NOR-Flash, 256 MB NAND and other interfaces,
2. N6310 S: evalkit, w/wo eMMC, without display,
3. N6310 S 43: evalkit with 4.3" display,
The work is based on Exceet/Kontron source code (GPLv2) with numerous changes:
1. Reorganize files,
2. Rename Exceet -> Kontron,
3. Rename models/compatibles to match newest Kontron product naming,
4. Fix coding style errors and adjust to device tree coding guidelines,
5. Fix DTC warnings,
6. Extend compatibles so eval boards inherit the SoM compatible,
7. Use defines instead of GPIO and interrupt flag values,
8. Use proper vendor compatible for Macronix SPI NOR,
9. Replace deprecated bindings with proper ones,
10. Sort nodes alphabetically,
11. Remove Admatec display nodes (not yet supported).
---
Changes since v6:
1. None
Changes since v5:
1. Split Documentation/devicetree/bindings/arm/fsl.yaml update to separate patch.
Changes since v4:
1. Split Documentation/devicetree/bindings/eeprom/at25.txt update to separate patch.
Changes since v3, after Shawn's review:
1. Split bindings update to patch 2/3,
2. Remove unsupported displays from (Admatec),
3. Remove N6310 S 50 board (same as N6310 S 43 since there is no Admatec display),
4. Order iomux nodes by name, minor cleanup,
5. Use wakeup-source instead of enable-sdio-wakeup,
6. Add review tags.
Changes since v2, after Fabio's review:
1. Add "imx6ul" compatible to board name (that's what I understood from review),
2. Add vendor/device prefix to eeprom and document the compatible,
3. Use "admatecde" as vendor compatible to avoid confusion with Admatec AG in Switzerland (also making LCD panels),
4. Use generic names for nodes,
5. Use IRQ_TYPE_LEVEL_LOW,
6. Move iomux to the end of files,
7. Remove regulators node (include regulators in top level),
8. Remove cpu clock-frequency,
9. Other minor fixes pointed by Fabio.
Changes since v1, after Frieder's review:
1. Remove unneeded license notes,
2. Add Kontron copyright (2018),
3. Rename the files/models/compatibles to new naming - N6310,
4. Remove unneeded CPU operating points override,
5. Switch regulator nodes into simple children nodes without addresses (so not simple bus),
6. Use proper vendor compatible for Macronix SPI NOR.
--- arch/arm/boot/dts/Makefile | 2 + .../boot/dts/imx6ul-kontron-n6310-s-43.dts | 102 +++++ arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts | 420 ++++++++++++++++++ .../boot/dts/imx6ul-kontron-n6310-som.dtsi | 134 ++++++ 4 files changed, 658 insertions(+) create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
arch/arm/boot/dts/Makefile +2 -0
@@ -569,6 +569,8 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-geam.dtb \ imx6ul-isiot-emmc.dtb \ imx6ul-isiot-nand.dtb \ + imx6ul-kontron-n6310-s.dtb \ + imx6ul-kontron-n6310-s-43.dtb \ imx6ul-liteboard.dtb \ imx6ul-opos6uldev.dtb \ imx6ul-pico-hobbit.dtb \
arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts new file +102 -0
102 lines not on this page · raw message
arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts new file +420 -0
420 lines not on this page · raw message
arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi new file +134 -0
134 lines not on this page · raw message
Signature · 1 line
2.17.1
Shawn Guo
AppliedQuoted 4 lines · Krzysztof Kozlowski
Add vendor prefix for Anvo-Systems Dresden GmbH.
Signed-off-by Krzysztof Kozlowski <[email protected]>Reviewed-by Rob Herring <[email protected]>
Applied all, thanks.