samples: bpf: add max_pckt_size option at xdp_adjust_tail
Subsystems (4)
PATCH v2 1/1 samples: bpf: add max_pckt_size option at xdp_adjust_tail
Currently, at xdp_adjust_tail_kern.c, MAX_PCKT_SIZE is limited to 600. To make this size flexible, a new map 'pcktsz' is added.
By updating new packet size to this map from the userland, xdp_adjust_tail_kern.o will use this value as a new max_pckt_size.
If no '-P <MAX_PCKT_SIZE>' option is used, the size of maximum packet will be 600 as a default.
---
Changes in v2:
- Change the helper to fetch map from 'bpf_map__next' to 'bpf_object__find_map_fd_by_name'.
samples/bpf/xdp_adjust_tail_kern.c | 23 +++++++++++++++++++---- samples/bpf/xdp_adjust_tail_user.c | 27 +++++++++++++++++++++------ 2 files changed, 40 insertions(+), 10 deletions(-)
samples/bpf/xdp_adjust_tail_kern.c +19 -4
@@ -25,6 +25,13 @@#define ICMP_TOOBIG_SIZE 98#define ICMP_TOOBIG_PAYLOAD_SIZE 92 +struct bpf_map_def SEC("maps") pcktsz = { + .type = BPF_MAP_TYPE_ARRAY, + .key_size = sizeof(__u32), + .value_size = sizeof(__u32), + .max_entries = 1, +}; + struct bpf_map_def SEC("maps") icmpcnt = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(__u32),
@@ -64,7 +71,8 @@ static __always_inline void ipv4_csum(void *data_start, int data_size, *csum =csum_fold_helper (*csum); } -static __always_inline int send_icmp4_too_big(struct xdp_md *xdp) +static __always_inline int send_icmp4_too_big(struct xdp_md *xdp, +__u32 max_pckt_size) {int headroom = (int )sizeof (struct iphdr ) + (int )sizeof (struct icmphdr );
@@ -92,7 +100,7 @@ static __always_inline int send_icmp4_too_big(struct xdp_md *xdp) orig_iph = data + off; icmp_hdr->type =ICMP_DEST_UNREACH ; icmp_hdr->code =ICMP_FRAG_NEEDED ; - icmp_hdr->un.frag.mtu =htons (MAX_PCKT_SIZE -sizeof (struct ethhdr )); + icmp_hdr->un.frag.mtu =htons (max_pckt_size -sizeof (struct ethhdr )); icmp_hdr->checksum =0 ;ipv4_csum (icmp_hdr,ICMP_TOOBIG_PAYLOAD_SIZE , &csum); icmp_hdr->checksum = csum;
@@ -118,14 +126,21 @@ static __always_inline int handle_ipv4(struct xdp_md *xdp) {void *data_end = (void *)(long )xdp->data_end;void *data = (void *)(long )xdp->data; +__u32 max_pckt_size =MAX_PCKT_SIZE ; +__u32 *pckt_sz; +__u32 key =0 ;int pckt_size = data_end - data;int offset; -if (pckt_size >MAX_PCKT_SIZE ) { + pckt_sz =bpf_map_lookup_elem (&pcktsz, &key); +if (pckt_sz && *pckt_sz) + max_pckt_size = *pckt_sz; + +if (pckt_size > max_pckt_size) { offset = pckt_size -ICMP_TOOBIG_SIZE ;if (bpf_xdp_adjust_tail (xdp,0 - offset))return XDP_PASS ; -return send_icmp4_too_big (xdp); +return send_icmp4_too_big (xdp, max_pckt_size); }return XDP_PASS ; }
samples/bpf/xdp_adjust_tail_user.c +21 -6
@@ -72,6 +72,7 @@ static void usage(const char *cmd)printf ("Usage: %s [...]\n" , cmd);printf (" -i <ifname|ifindex> Interface\n" );printf (" -T <stop-after-X-seconds> Default: 0 (forever)\n" ); +printf (" -P <MAX_PCKT_SIZE> Default: 600\n" );printf (" -S use skb-mode\n" );printf (" -N enforce native mode\n" );printf (" -F force loading prog\n" );
@@ -85,13 +86,14 @@ int main(int argc, char **argv) .prog_type = BPF_PROG_TYPE_XDP, };unsigned char opt_flags[256 ] = {}; -const char *optstr ="i:T:SNFh" ; +const char *optstr ="i:T:P:SNFh" ;struct bpf_prog_info info = {};__u32 info_len =sizeof (info); +__u32 max_pckt_size =0 ; +__u32 key =0 ;unsigned int kill_after_s =0 ;int i, prog_fd, map_fd, opt;struct bpf_object *obj; -struct bpf_map *map;char filename[256 ];int err;
@@ -110,6 +112,9 @@ int main(int argc, char **argv)case 'T' : kill_after_s =atoi (optarg);break ; +case 'P' : + max_pckt_size =atoi (optarg); +break ;case 'S' : xdp_flags |=XDP_FLAGS_SKB_MODE ;break ;
@@ -150,12 +155,22 @@ int main(int argc, char **argv)if (bpf_prog_load_xattr (&prog_load_attr, &obj, &prog_fd))return 1 ; - map =bpf_map__next (NULL , obj); -if (!map) { -printf ("finding a map in obj file failed\n" ); +/* update pcktsz map */ +if (max_pckt_size) { + map_fd =bpf_object__find_map_fd_by_name (obj,"pcktsz" ); +if (!map_fd) { +printf ("finding a pcktsz map in obj file failed\n" ); +return 1 ; + } +bpf_map_update_elem (map_fd, &key, &max_pckt_size,BPF_ANY ); + } + +/* fetch icmpcnt map */ + map_fd =bpf_object__find_map_fd_by_name (obj,"icmpcnt" ); +if (!map_fd) { +printf ("finding a icmpcnt map in obj file failed\n" );return 1 ; } - map_fd =bpf_map__fd (map);if (!prog_fd) {printf ("load_bpf_file: %s\n" ,strerror (errno));
Signature · 1 line
2.20.1
Quoted 9 lines · Daniel T. Lee
Currently, at
xdp_adjust_tail_kern.c,MAX_PCKT_SIZEis limited to 600. To make this size flexible, a new map 'pcktsz' is added.By updating new packet size to this map from the userland, xdp_adjust_tail_kern.o will use this value as a new
max_pckt_size.If no '-P <
MAX_PCKT_SIZE>' option is used, the size of maximum packet will be 600 as a default.
Please also cc [email protected] for bpf patches.
Quoted 2 lines
Signed-off-by Daniel T. Lee <[email protected]>
With a nit below.
[...]
samples/bpf/xdp_adjust_tail_user.c static void usage(const char *cmd) · line 75
Quoted 9 lines
samples/bpf/xdp_adjust_tail_user.c +1
-0@@ -72,6 +72,7 @@ static void usage(const char *cmd)printf ("Usage: %s [...]\n" , cmd);printf (" -i <ifname|ifindex> Interface\n" );printf (" -T <stop-after-X-seconds> Default: 0 (forever)\n" ); +printf (" -P <MAX_PCKT_SIZE> Default: 600\n" );
nit: printf(" -P <MAX_PCKT_SIZE> Default: %u\n", MAX_PCKT_SIZE);
Quoted 6 lines · Song Liu
Quoted 4 lines · Daniel T. Lee
Currently, at
xdp_adjust_tail_kern.c,MAX_PCKT_SIZEis limited to 600. To make this size flexible, a new map 'pcktsz' is added.
Quoted 8 lines
Quoted 5 lines
By updating new packet size to this map from the userland, xdp_adjust_tail_kern.o will use this value as a new
max_pckt_size.If no '-P <
MAX_PCKT_SIZE>' option is used, the size of maximum packet will be 600 as a default.Please also cc [email protected] for bpf patches.
I'll make sure to have it included next time.
Quoted 9 lines
Quoted 2 lines
Signed-off-by Daniel T. Lee <[email protected]>Acked-by Song Liu <[email protected]>With a nit below.
[...]
Quoted 11 lines
samples/bpf/xdp_adjust_tail_user.c static void usage(const char *cmd) · line 75
Quoted 9 lines
samples/bpf/xdp_adjust_tail_user.c +1
-0@@ -72,6 +72,7 @@ static void usage(const char *cmd)printf ("Usage: %s [...]\n" , cmd);printf (" -i <ifname|ifindex> Interface\n" );printf (" -T <stop-after-X-seconds> Default: 0 (forever)\n" ); +printf (" -P <MAX_PCKT_SIZE> Default: 600\n" );nit:
printf(" -P <MAX_PCKT_SIZE> Default: %u\n", MAX_PCKT_SIZE);
With all due respect, I'm afraid that MAX_PCKT_SIZE constant is only defined at '_kern.c'.
Are you saying that it should be defined at '_user.c' either?
Thanks for the review!
Quoted 40 lines · Daniel T. Lee
Quoted 6 lines · Song Liu
Quoted 4 lines · Daniel T. Lee
Currently, at
xdp_adjust_tail_kern.c,MAX_PCKT_SIZEis limited to 600. To make this size flexible, a new map 'pcktsz' is added.Quoted 8 lines
Quoted 5 lines
By updating new packet size to this map from the userland, xdp_adjust_tail_kern.o will use this value as a new
max_pckt_size.If no '-P <
MAX_PCKT_SIZE>' option is used, the size of maximum packet will be 600 as a default.Please also cc [email protected] for bpf patches.
I'll make sure to have it included next time.
Quoted 9 lines
Quoted 2 lines
Signed-off-by Daniel T. Lee <[email protected]>Acked-by Song Liu <[email protected]>With a nit below.
[...]
Quoted 11 lines
samples/bpf/xdp_adjust_tail_user.c static void usage(const char *cmd) · line 75
Quoted 9 lines
samples/bpf/xdp_adjust_tail_user.c +1
-0@@ -72,6 +72,7 @@ static void usage(const char *cmd)printf ("Usage: %s [...]\n" , cmd);printf (" -i <ifname|ifindex> Interface\n" );printf (" -T <stop-after-X-seconds> Default: 0 (forever)\n" ); +printf (" -P <MAX_PCKT_SIZE> Default: 600\n" );nit:
printf(" -P <MAX_PCKT_SIZE> Default: %u\n", MAX_PCKT_SIZE);
Quoted 5 lines
With all due respect, I'm afraid that
MAX_PCKT_SIZEconstant is only defined at '_kern.c'.
Are you saying that it should be defined at '_user.c' either?Thanks for the review!
Ping?