PCI: Fix misspelled words.
Subsystems (4)
PATCH 1/1 PCI: Fix misspelled words.
Fix misspelled words in include/linux/pci.h, drivers/pci/Kconfig, and in the documentation for Freescale i.MX6 and Marvell Armada 7K/8K PCIe interfaces. No functional change intended.
Related commit 96291d565550 ("PCI: Fix typos and whitespace errors").
--- Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt | 2 +- Documentation/devicetree/bindings/pci/pci-armada8k.txt | 2 +- drivers/pci/Kconfig | 2 +- include/linux/pci.h | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +1 -1
@@ -50,7 +50,7 @@ Additional required properties for imx7d-pcie and imx8mq-pcie: - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain - resets: Must contain phandles to PCIe-related reset lines exposed by SRC IP block -- reset-names: Must contain the following entires: +- reset-names: Must contain the following entries: - "pciephy" - "apps" - "turnoff"
Documentation/devicetree/bindings/pci/pci-armada8k.txt +1 -1
@@ -11,7 +11,7 @@ Required properties: - reg-names: - "ctrl" for the control register region - "config" for the config space region -- interrupts: Interrupt specifier for the PCIe controler +- interrupts: Interrupt specifier for the PCIe controller - clocks: reference to the PCIe controller clocks - clock-names: mandatory if there is a second clock, in this case the name must be "core" for the first clock and "reg" for the second
drivers/pci/Kconfig +1 -1
@@ -170,7 +170,7 @@ config PCI_P2PDMA Many PCIe root complexes do not support P2P transactions and it's hard to tell which support it at all, so at this time, - P2P DMA transations must be between devices behind the same root + P2P DMA transactions must be between devices behind the same root port. If unsure, say N.
include/linux/pci.h +1 -1
@@ -961,7 +961,7 @@ resource_size_t pcibios_align_resource(void *, const struct resource *, resource_size_t, resource_size_t); -/* Weak but can be overriden by arch */ +/* Weak but can be overridden by arch */ void pci_fixup_cardbus (struct pci_bus *);/* Generic PCI functions used internally */
Signature · 1 line
2.22.0
Quoted 10 lines · On Mon, 19 Aug 2019 13:53:06 +0200 Krzysztof Wilczynski <[email protected]> wrote:
Fix misspelled words in
include/linux/pci.h,drivers/pci/Kconfig, and in the documentation for Freescale i.MX6 and Marvell Armada 7K/8K PCIe interfaces. No functional change intended.Related commit
96291d565550("PCI: Fix typos and whitespace errors").Signed-off-by Krzysztof Wilczynski <[email protected]>--- Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt | 2 +- Documentation/devicetree/bindings/pci/pci-armada8k.txt | 2 +-
For pci-armada8k.txt:
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Quoted 6 lines · Krzysztof Wilczynski
Fix misspelled words in
include/linux/pci.h,drivers/pci/Kconfig, and in the documentation for Freescale i.MX6 and Marvell Armada 7K/8K PCIe interfaces. No functional change intended.Related commit
96291d565550("PCI: Fix typos and whitespace errors").
Quoted 8 lines
Signed-off-by Krzysztof Wilczynski <[email protected]>--- Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt | 2 +- Documentation/devicetree/bindings/pci/pci-armada8k.txt | 2 +- drivers/pci/Kconfig | 2 +- include/linux/pci.h | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)
Quoted 7 lines · Krzysztof Wilczynski
Fix misspelled words in
include/linux/pci.h,drivers/pci/Kconfig, and in the documentation for Freescale i.MX6 and Marvell Armada 7K/8K PCIe interfaces. No functional change intended.Related commit
96291d565550("PCI: Fix typos and whitespace errors").Signed-off-by Krzysztof Wilczynski <[email protected]>
Applied with Thomas' ack and Rob's reviewed-by to pci/trivial for v5.4, thanks!
Quoted 62 lines
--- Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt | 2 +- Documentation/devicetree/bindings/pci/pci-armada8k.txt | 2 +- drivers/pci/Kconfig | 2 +- include/linux/pci.h | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +1
-1@@ -50,7 +50,7 @@ Additional required properties for imx7d-pcie and imx8mq-pcie: - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain - resets: Must contain phandles to PCIe-related reset lines exposed by SRC IP block -- reset-names: Must contain the following entires: +- reset-names: Must contain the following entries: - "pciephy" - "apps" - "turnoff"Documentation/devicetree/bindings/pci/pci-armada8k.txt +1
-1@@ -11,7 +11,7 @@ Required properties: - reg-names: - "ctrl" for the control register region - "config" for the config space region -- interrupts: Interrupt specifier for the PCIe controler +- interrupts: Interrupt specifier for the PCIe controller - clocks: reference to the PCIe controller clocks - clock-names: mandatory if there is a second clock, in this case the name must be "core" for the first clock and "reg" for the seconddrivers/pci/Kconfig +1
-1@@ -170,7 +170,7 @@ config PCI_P2PDMA Many PCIe root complexes do not support P2P transactions and it's hard to tell which support it at all, so at this time, - P2P DMA transations must be between devices behind the same root + P2P DMA transactions must be between devices behind the same root port. If unsure, say N.include/linux/pci.h +1
-1@@ -961,7 +961,7 @@ resource_size_t pcibios_align_resource(void *, const struct resource *, resource_size_t, resource_size_t); -/* Weak but can be overriden by arch */ +/* Weak but can be overridden by arch */ void pci_fixup_cardbus (struct pci_bus *);/* Generic PCI functions used internally */ Signature · 1 line
2.22.0