Skip to contentSkip to conversation

tools lib traceevent: Fixes for adding tasks to the tep descriptor

PATCH Applied Steven Rostedt 2 participants 5 messages Aug 28, 2019 – Aug 29, 2019 Stable branch

lore
Share & tools
lore
#0 lore raw

cover tools lib traceevent: Fixes for adding tasks to the tep descriptor

Hi Arnaldo,

Please pull in these patches as they fix the lib tools traceevent code that has issues with adding in new tasks on large data files.

-- Steve

Steven Rostedt (VMware) (2):
tools lib traceevent: Do not free tep->cmdlines in add_new_comm() on failure tools lib traceevent: Remove unneeded qsort and uses memmove instead

----

 tools/lib/traceevent/event-parse.c | 58 ++++++++++++++++++++++++++++++++------
 1 file changed, 50 insertions(+), 8 deletions(-)
#1 lore raw

PATCH 1/2 tools lib traceevent: Do not free tep->cmdlines in add_new_comm() on failure

From: "Steven Rostedt (VMware)" <[email protected]>

If the re-allocation of tep->cmdlines succeeds, then the previous allocation of tep->cmdlines will be freed. If we later fail in add_new_comm(), we must not free cmdlines, and also should assign tep->cmdlines to the new allocation. Otherwise when freeing tep, the tep->cmdlines will be pointing to garbage.

Fixes a6d2a61ac653a ("tools lib traceevent: Remove some die() calls")
---
 tools/lib/traceevent/event-parse.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
tools/lib/traceevent/event-parse.c +1 -2
index b36b536a9fcb..13fd9fdf91e0 100644
@@ -269,10 +269,10 @@ static int add_new_comm(struct tep_handle *tep,
 		errno = ENOMEM;
 		return -1;
 	}
+	tep->cmdlines = cmdlines;
 
 	cmdlines[tep->cmdline_count].comm = strdup(comm);
 	if (!cmdlines[tep->cmdline_count].comm) {
-		free(cmdlines);
 		errno = ENOMEM;
 		return -1;
 	}
@@ -283,7 +283,6 @@ static int add_new_comm(struct tep_handle *tep,
 		tep->cmdline_count++;
 
 	qsort(cmdlines, tep->cmdline_count, sizeof(*cmdlines), cmdline_cmp);
-	tep->cmdlines = cmdlines;
 
 	return 0;
 }
Signature · 1 line
2.20.1
#2 lore raw

[tip: perf/core] tools lib traceevent: Do not free tep->cmdlines in add_new_comm() on failure

The following commit has been merged into the perf/core branch of tip:

The following commit has been merged into the perf/core branch of tip:

Commit-ID:     b0215e2d6a18d8331b2d4a8b38ccf3eff783edb1
Gitweb:        https://git.kernel.org/tip/b0215e2d6a18d8331b2d4a8b38ccf3eff783edb1
Author:        Steven Rostedt (VMware) <[email protected]>
AuthorDate:    Wed, 28 Aug 2019 15:05:28 -04:00
Committer:     Arnaldo Carvalho de Melo <[email protected]>
CommitterDate: Thu, 29 Aug 2019 08:36:12 -03:00

tools lib traceevent: Do not free tep->cmdlines in add_new_comm() on failure

If the re-allocation of tep->cmdlines succeeds, then the previous allocation of tep->cmdlines will be freed. If we later fail in add_new_comm(), we must not free cmdlines, and also should assign tep->cmdlines to the new allocation. Otherwise when freeing tep, the tep->cmdlines will be pointing to garbage.

Fixes a6d2a61ac653a ("tools lib traceevent: Remove some die() calls")
Cc Andrew Morton <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Namhyung Kim <[email protected]>
---
 tools/lib/traceevent/event-parse.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
tools/lib/traceevent/event-parse.c +1 -2
index b36b536..13fd9fd 100644
@@ -269,10 +269,10 @@ static int add_new_comm(struct tep_handle *tep,
 		errno = ENOMEM;
 		return -1;
 	}
+	tep->cmdlines = cmdlines;
 
 	cmdlines[tep->cmdline_count].comm = strdup(comm);
 	if (!cmdlines[tep->cmdline_count].comm) {
-		free(cmdlines);
 		errno = ENOMEM;
 		return -1;
 	}
@@ -283,7 +283,6 @@ static int add_new_comm(struct tep_handle *tep,
 		tep->cmdline_count++;
 
 	qsort(cmdlines, tep->cmdline_count, sizeof(*cmdlines), cmdline_cmp);
-	tep->cmdlines = cmdlines;
 
 	return 0;
 }
#3 lore raw

PATCH 2/2 tools lib traceevent: Remove unneeded qsort and uses memmove instead

In reply to Steven Rostedt

From: "Steven Rostedt (VMware)" <[email protected]>

While reading a trace data file that had 100,000s of tasks, the process took an extremely long time. I profiled it down to add_new_comm(), which was doing a qsort() call on an array that was pretty much already sorted (all but the last element. qsort() isn't very efficient when dealing with mostly sorted arrays, and this definitely showed its issues.

When adding a new task to the task list, instead of using qsort(), do another bsearch() with a function that will find the element before where the new task will be inserted in. Then simply shift the rest of the array, and insert the task where it belongs.

Fixes f7d82350e597d ("tools/events: Add files to create libtraceevent.a")
---
 tools/lib/traceevent/event-parse.c | 55 ++++++++++++++++++++++++++----
 1 file changed, 49 insertions(+), 6 deletions(-)
tools/lib/traceevent/event-parse.c +49 -6
index 13fd9fdf91e0..3e83636076b2 100644
@@ -142,6 +142,25 @@ static int cmdline_cmp(const void *a, const void *b)
 	return 0;
 }
 
+/* Looking for where to place the key */
+static int cmdline_slot_cmp(const void *a, const void *b)
+{
+	const struct tep_cmdline *ca = a;
+	const struct tep_cmdline *cb = b;
+	const struct tep_cmdline *cb1 = cb + 1;
+
+	if (ca->pid < cb->pid)
+		return -1;
+
+	if (ca->pid > cb->pid) {
+		if (ca->pid <= cb1->pid)
+			return 0;
+		return 1;
+	}
+
+	return 0;
+}
+
 struct cmdline_list {
 	struct cmdline_list	*next;
 	char			*comm;
@@ -239,6 +258,7 @@ static int add_new_comm(struct tep_handle *tep,
 	struct tep_cmdline *cmdline;
 	struct tep_cmdline key;
 	char *new_comm;
+	int cnt;
 
 	if (!pid)
 		return 0;
@@ -271,18 +291,41 @@ static int add_new_comm(struct tep_handle *tep,
 	}
 	tep->cmdlines = cmdlines;
 
-	cmdlines[tep->cmdline_count].comm = strdup(comm);
-	if (!cmdlines[tep->cmdline_count].comm) {
+	key.comm = strdup(comm);
+	if (!key.comm) {
 		errno = ENOMEM;
 		return -1;
 	}
 
-	cmdlines[tep->cmdline_count].pid = pid;
-		
-	if (cmdlines[tep->cmdline_count].comm)
+	if (!tep->cmdline_count) {
+		/* no entries yet */
+		tep->cmdlines[0] = key;
 		tep->cmdline_count++;
+		return 0;
+	}
 
-	qsort(cmdlines, tep->cmdline_count, sizeof(*cmdlines), cmdline_cmp);
+	/* Now find where we want to store the new cmdline */
+	cmdline = bsearch(&key, tep->cmdlines, tep->cmdline_count - 1,
+			  sizeof(*tep->cmdlines), cmdline_slot_cmp);
+
+	cnt = tep->cmdline_count;
+	if (cmdline) {
+		/* cmdline points to the one before the spot we want */
+		cmdline++;
+		cnt -= cmdline - tep->cmdlines;
+
+	} else {
+		/* The new entry is either before or after the list */
+		if (key.pid > tep->cmdlines[tep->cmdline_count - 1].pid) {
+			tep->cmdlines[tep->cmdline_count++] = key;
+			return 0;
+		}
+		cmdline = &tep->cmdlines[0];
+	}
+	memmove(cmdline + 1, cmdline, (cnt * sizeof(*cmdline)));
+	*cmdline = key;
+
+	tep->cmdline_count++;
 
 	return 0;
 }
Signature · 1 line
2.20.1
#4 lore raw

[tip: perf/core] tools lib traceevent: Remove unneeded qsort and uses memmove instead

The following commit has been merged into the perf/core branch of tip:

The following commit has been merged into the perf/core branch of tip:

Commit-ID:     301011ba622513cb41ced59973972204e0da2f71
Gitweb:        https://git.kernel.org/tip/301011ba622513cb41ced59973972204e0da2f71
Author:        Steven Rostedt (VMware) <[email protected]>
AuthorDate:    Wed, 28 Aug 2019 15:05:29 -04:00
Committer:     Arnaldo Carvalho de Melo <[email protected]>
CommitterDate: Thu, 29 Aug 2019 08:36:12 -03:00

tools lib traceevent: Remove unneeded qsort and uses memmove instead

While reading a trace data file that had 100,000s of tasks, the process took an extremely long time. I profiled it down to add_new_comm(), which was doing a qsort() call on an array that was pretty much already sorted (all but the last element. qsort() isn't very efficient when dealing with mostly sorted arrays, and this definitely showed its issues.

When adding a new task to the task list, instead of using qsort(), do another bsearch() with a function that will find the element before where the new task will be inserted in. Then simply shift the rest of the array, and insert the task where it belongs.

Fixes f7d82350e597d ("tools/events: Add files to create libtraceevent.a")
Cc Andrew Morton <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Namhyung Kim <[email protected]>
---
 tools/lib/traceevent/event-parse.c | 55 +++++++++++++++++++++++++----
 1 file changed, 49 insertions(+), 6 deletions(-)
tools/lib/traceevent/event-parse.c +49 -6
index 13fd9fd..3e83636 100644
@@ -142,6 +142,25 @@ static int cmdline_cmp(const void *a, const void *b)
 	return 0;
 }
 
+/* Looking for where to place the key */
+static int cmdline_slot_cmp(const void *a, const void *b)
+{
+	const struct tep_cmdline *ca = a;
+	const struct tep_cmdline *cb = b;
+	const struct tep_cmdline *cb1 = cb + 1;
+
+	if (ca->pid < cb->pid)
+		return -1;
+
+	if (ca->pid > cb->pid) {
+		if (ca->pid <= cb1->pid)
+			return 0;
+		return 1;
+	}
+
+	return 0;
+}
+
 struct cmdline_list {
 	struct cmdline_list	*next;
 	char			*comm;
@@ -239,6 +258,7 @@ static int add_new_comm(struct tep_handle *tep,
 	struct tep_cmdline *cmdline;
 	struct tep_cmdline key;
 	char *new_comm;
+	int cnt;
 
 	if (!pid)
 		return 0;
@@ -271,18 +291,41 @@ static int add_new_comm(struct tep_handle *tep,
 	}
 	tep->cmdlines = cmdlines;
 
-	cmdlines[tep->cmdline_count].comm = strdup(comm);
-	if (!cmdlines[tep->cmdline_count].comm) {
+	key.comm = strdup(comm);
+	if (!key.comm) {
 		errno = ENOMEM;
 		return -1;
 	}
 
-	cmdlines[tep->cmdline_count].pid = pid;
-		
-	if (cmdlines[tep->cmdline_count].comm)
+	if (!tep->cmdline_count) {
+		/* no entries yet */
+		tep->cmdlines[0] = key;
 		tep->cmdline_count++;
+		return 0;
+	}
 
-	qsort(cmdlines, tep->cmdline_count, sizeof(*cmdlines), cmdline_cmp);
+	/* Now find where we want to store the new cmdline */
+	cmdline = bsearch(&key, tep->cmdlines, tep->cmdline_count - 1,
+			  sizeof(*tep->cmdlines), cmdline_slot_cmp);
+
+	cnt = tep->cmdline_count;
+	if (cmdline) {
+		/* cmdline points to the one before the spot we want */
+		cmdline++;
+		cnt -= cmdline - tep->cmdlines;
+
+	} else {
+		/* The new entry is either before or after the list */
+		if (key.pid > tep->cmdlines[tep->cmdline_count - 1].pid) {
+			tep->cmdlines[tep->cmdline_count++] = key;
+			return 0;
+		}
+		cmdline = &tep->cmdlines[0];
+	}
+	memmove(cmdline + 1, cmdline, (cnt * sizeof(*cmdline)));
+	*cmdline = key;
+
+	tep->cmdline_count++;
 
 	return 0;
 }