pinctrl-mcp23s08: Fix property-name in dt-example
Subsystems (3)
PATCH 1/1 pinctrl-mcp23s08: Fix property-name in dt-example
The device-tree properties documentation-file specifies the property "microchip,spi-present-mask" as required for MCP23SXX chips. However, the device-tree-source example below it uses only "spi-present-mask". Without "microchip," on the front, the driver will print "missing spi-present-mask" when it initializes.
Update the device-tree example with the correct property-name.
--- Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt +1 -1
@@ -82,7 +82,7 @@ gpiom1: gpio@0 { compatible = "microchip,mcp23s17"; gpio-controller; #gpio-cells = <2>; - spi-present-mask = <0x01>; + microchip,spi-present-mask = <0x01>; reg = <0>; spi-max-frequency = <1000000>; };
Signature · 1 line
2.20.1
Quoted 9 lines · Peter Vernia
The device-tree properties documentation-file specifies the property "microchip,spi-present-mask" as required for MCP23SXX chips. However, the device-tree-source example below it uses only "spi-present-mask". Without "microchip," on the front, the driver will print "missing spi-present-mask" when it initializes.
Update the device-tree example with the correct property-name.
Signed-off-by Peter Vernia <[email protected]>
Quoted 17 lines
--- Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt +1
-1@@ -82,7 +82,7 @@ gpiom1: gpio@0 { compatible = "microchip,mcp23s17"; gpio-controller; #gpio-cells = <2>; - spi-present-mask = <0x01>; + microchip,spi-present-mask = <0x01>; reg = <0>; spi-max-frequency = <1000000>; };
Quoted 6 lines · Peter Vernia
The device-tree properties documentation-file specifies the property "microchip,spi-present-mask" as required for MCP23SXX chips. However, the device-tree-source example below it uses only "spi-present-mask". Without "microchip," on the front, the driver will print "missing spi-present-mask" when it initializes.
Quoted 7 lines
Update the device-tree example with the correct property-name.
Signed-off-by Peter Vernia <[email protected]>--- Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Applied, thanks.
Rob