dt-bindings: Convert Arm Mali GPUs to DT schema

deleted file mode 100644
index 9b298edec5b2..000000000000
@@ -1,119 +0,0 @@
-ARM Mali Midgard GPU
-====================
-
-Required properties:
-
-- compatible :
-  * Must contain one of the following:
-    + "arm,mali-t604"
-    + "arm,mali-t624"
-    + "arm,mali-t628"
-    + "arm,mali-t720"
-    + "arm,mali-t760"
-    + "arm,mali-t820"
-    + "arm,mali-t830"
-    + "arm,mali-t860"
-    + "arm,mali-t880"
-  * which must be preceded by one of the following vendor specifics:
-    + "allwinner,sun50i-h6-mali"
-    + "amlogic,meson-gxm-mali"
-    + "samsung,exynos5433-mali"
-    + "rockchip,rk3288-mali"
-    + "rockchip,rk3399-mali"
-
-- reg : Physical base address of the device and length of the register area.
-
-- interrupts : Contains the three IRQ lines required by Mali Midgard devices.
-
-- interrupt-names : Contains the names of IRQ resources in the order they were
-  provided in the interrupts property. Must contain: "job", "mmu", "gpu".
-
-
-Optional properties:
-
-- clocks : Phandle to clock for the Mali Midgard device.
-
-- clock-names : Specify the names of the clocks specified in clocks
-  when multiple clocks are present.
-    * core: clock driving the GPU itself (When only one clock is present,
-      assume it's this clock.)
-    * bus: bus clock for the GPU
-
-- mali-supply : Phandle to regulator for the Mali device. Refer to
-  Documentation/devicetree/bindings/regulator/regulator.txt for details.
-
-- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt
-  for details.
-
-- #cooling-cells: Refer to Documentation/devicetree/bindings/thermal/thermal.txt
-  for details.
-
-- resets : Phandle of the GPU reset line.
-
-Vendor-specific bindings
-------------------------
-
-The Mali GPU is integrated very differently from one SoC to
-another. In order to accommodate those differences, you have the option
-to specify one more vendor-specific compatible, among:
-
-- "allwinner,sun50i-h6-mali"
-  Required properties:
-  - clocks : phandles to core and bus clocks
-  - clock-names : must contain "core" and "bus"
-  - resets: phandle to GPU reset line
-
-- "amlogic,meson-gxm-mali"
-  Required properties:
-  - resets : Should contain phandles of :
-    + GPU reset line
-    + GPU APB glue reset line
-
-Example for a Mali-T760:
-
-gpu@ffa30000 {
-	compatible = "rockchip,rk3288-mali", "arm,mali-t760";
-	reg = <0xffa30000 0x10000>;
-	interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "job", "mmu", "gpu";
-	clocks = <&cru ACLK_GPU>;
-	mali-supply = <&vdd_gpu>;
-	operating-points-v2 = <&gpu_opp_table>;
-	power-domains = <&power RK3288_PD_GPU>;
-	#cooling-cells = <2>;
-};
-
-gpu_opp_table: opp_table0 {
-	compatible = "operating-points-v2";
-
-	opp@533000000 {
-		opp-hz = /bits/ 64 <533000000>;
-		opp-microvolt = <1250000>;
-	};
-	opp@450000000 {
-		opp-hz = /bits/ 64 <450000000>;
-		opp-microvolt = <1150000>;
-	};
-	opp@400000000 {
-		opp-hz = /bits/ 64 <400000000>;
-		opp-microvolt = <1125000>;
-	};
-	opp@350000000 {
-		opp-hz = /bits/ 64 <350000000>;
-		opp-microvolt = <1075000>;
-	};
-	opp@266000000 {
-		opp-hz = /bits/ 64 <266000000>;
-		opp-microvolt = <1025000>;
-	};
-	opp@160000000 {
-		opp-hz = /bits/ 64 <160000000>;
-		opp-microvolt = <925000>;
-	};
-	opp@100000000 {
-		opp-hz = /bits/ 64 <100000000>;
-		opp-microvolt = <912500>;
-	};
-};

165 lines not on this page · raw message

deleted file mode 100644
index b8be9dbc68b4..000000000000
@@ -1,92 +0,0 @@
-ARM Mali Bifrost GPU
-====================
-
-Required properties:
-
-- compatible :
-  * Since Mali Bifrost GPU model/revision is fully discoverable by reading
-    some determined registers, must contain the following:
-    + "arm,mali-bifrost"
-  * which must be preceded by one of the following vendor specifics:
-    + "amlogic,meson-g12a-mali"
-
-- reg : Physical base address of the device and length of the register area.
-
-- interrupts : Contains the three IRQ lines required by Mali Bifrost devices,
-  in the following defined order.
-
-- interrupt-names : Contains the names of IRQ resources in this exact defined
-  order: "job", "mmu", "gpu".
-
-Optional properties:
-
-- clocks : Phandle to clock for the Mali Bifrost device.
-
-- mali-supply : Phandle to regulator for the Mali device. Refer to
-  Documentation/devicetree/bindings/regulator/regulator.txt for details.
-
-- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt
-  for details.
-
-- resets : Phandle of the GPU reset line.
-
-Vendor-specific bindings
-------------------------
-
-The Mali GPU is integrated very differently from one SoC to
-another. In order to accommodate those differences, you have the option
-to specify one more vendor-specific compatible, among:
-
-- "amlogic,meson-g12a-mali"
-  Required properties:
-  - resets : Should contain phandles of :
-    + GPU reset line
-    + GPU APB glue reset line
-
-Example for a Mali-G31:
-
-gpu@ffa30000 {
-	compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost";
-	reg = <0xffe40000 0x10000>;
-	interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "job", "mmu", "gpu";
-	clocks = <&clk CLKID_MALI>;
-	mali-supply = <&vdd_gpu>;
-	operating-points-v2 = <&gpu_opp_table>;
-	resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>;
-};
-
-gpu_opp_table: opp_table0 {
-	compatible = "operating-points-v2";
-
-	opp@533000000 {
-		opp-hz = /bits/ 64 <533000000>;
-		opp-microvolt = <1250000>;
-	};
-	opp@450000000 {
-		opp-hz = /bits/ 64 <450000000>;
-		opp-microvolt = <1150000>;
-	};
-	opp@400000000 {
-		opp-hz = /bits/ 64 <400000000>;
-		opp-microvolt = <1125000>;
-	};
-	opp@350000000 {
-		opp-hz = /bits/ 64 <350000000>;
-		opp-microvolt = <1075000>;
-	};
-	opp@266000000 {
-		opp-hz = /bits/ 64 <266000000>;
-		opp-microvolt = <1025000>;
-	};
-	opp@160000000 {
-		opp-hz = /bits/ 64 <160000000>;
-		opp-microvolt = <925000>;
-	};
-	opp@100000000 {
-		opp-hz = /bits/ 64 <100000000>;
-		opp-microvolt = <912500>;
-	};
-};

116 lines not on this page · raw message

deleted file mode 100644
index ba895efe3039..000000000000
@@ -1,129 +0,0 @@
-ARM Mali Utgard GPU
-===================
-
-Required properties:
-  - compatible
-    * Must be one of the following:
-      + "arm,mali-300"
-      + "arm,mali-400"
-      + "arm,mali-450"
-    * And, optionally, one of the vendor specific compatible:
-      + allwinner,sun4i-a10-mali
-      + allwinner,sun7i-a20-mali
-      + allwinner,sun8i-h3-mali
-      + allwinner,sun50i-a64-mali
-      + allwinner,sun50i-h5-mali
-      + amlogic,meson8-mali
-      + amlogic,meson8b-mali
-      + amlogic,meson-gxbb-mali
-      + amlogic,meson-gxl-mali
-      + samsung,exynos4210-mali
-      + rockchip,rk3036-mali
-      + rockchip,rk3066-mali
-      + rockchip,rk3188-mali
-      + rockchip,rk3228-mali
-      + rockchip,rk3328-mali
-      + stericsson,db8500-mali
-      + hisilicon,hi6220-mali
-
-  - reg: Physical base address and length of the GPU registers
-
-  - interrupts: an entry for each entry in interrupt-names.
-    See ../interrupt-controller/interrupts.txt for details.
-
-  - interrupt-names:
-    * ppX: Pixel Processor X interrupt (X from 0 to 7)
-    * ppmmuX: Pixel Processor X MMU interrupt (X from 0 to 7)
-    * pp: Pixel Processor broadcast interrupt (mali-450 only)
-    * gp: Geometry Processor interrupt
-    * gpmmu: Geometry Processor MMU interrupt
-
-  - clocks: an entry for each entry in clock-names
-  - clock-names:
-    * bus: bus clock for the GPU
-    * core: clock driving the GPU itself
-
-Optional properties:
-  - interrupt-names and interrupts:
-    * pmu: Power Management Unit interrupt, if implemented in hardware
-
-  - memory-region:
-    Memory region to allocate from, as defined in
-    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
-
-  - mali-supply:
-    Phandle to regulator for the Mali device, as defined in
-    Documentation/devicetree/bindings/regulator/regulator.txt for details.
-
-  - operating-points-v2:
-    Operating Points for the GPU, as defined in
-    Documentation/devicetree/bindings/opp/opp.txt
-
-  - power-domains:
-    A power domain consumer specifier as defined in
-    Documentation/devicetree/bindings/power/power_domain.txt
-
-Vendor-specific bindings
-------------------------
-
-The Mali GPU is integrated very differently from one SoC to
-another. In order to accomodate those differences, you have the option
-to specify one more vendor-specific compatible, among:
-
-  - allwinner,sun4i-a10-mali
-    Required properties:
-      * resets: phandle to the reset line for the GPU
-
-  - allwinner,sun7i-a20-mali
-    Required properties:
-      * resets: phandle to the reset line for the GPU
-
-  - allwinner,sun50i-a64-mali
-    Required properties:
-      * resets: phandle to the reset line for the GPU
-
-  - allwinner,sun50i-h5-mali
-    Required properties:
-      * resets: phandle to the reset line for the GPU
-
-  - amlogic,meson8-mali and amlogic,meson8b-mali
-    Required properties:
-      * resets: phandle to the reset line for the GPU
-
-  - Rockchip variants:
-    Required properties:
-      * resets: phandle to the reset line for the GPU
-
-  - stericsson,db8500-mali
-    Required properties:
-      * interrupt-names and interrupts:
-        + combined: combined interrupt of all of the above lines
-
-  - hisilicon,hi6220-mali
-    Required properties:
-      * resets: phandles to the reset lines for the GPU
-
-Example:
-
-mali: gpu@1c40000 {
-	compatible = "allwinner,sun7i-a20-mali", "arm,mali-400";
-	reg = <0x01c40000 0x10000>;
-	interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "gp",
-			  "gpmmu",
-			  "pp0",
-			  "ppmmu0",
-			  "pp1",
-			  "ppmmu1",
-			  "pmu";
-	clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
-	clock-names = "bus", "core";
-	resets = <&ccu RST_BUS_GPU>;
-};
-

168 lines not on this page · raw message