Skip to contentSkip to conversation

drm/komeda: Add layer line size support

PATCH Superseded Lowry Li (Arm Technology China) 1 participant 3 messages Aug 30, 2019

Subsystems (4)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

cover drm/komeda: Add layer line size support

Hi,

Quoted 1 line

From D32 every component have a line size register to indicate internal

fifo size, instead of using the global line_sz.

This serie aims at adding the layer line size support and check accordingly on both D71 and D32 or newer.

Lowry Li (Arm Technology China) (2):
drm/komeda: Add line size support
drm/komeda: Adds layer horizontal input size limitation check for D71

 .../arm/display/komeda/d71/d71_component.c    | 105 ++++++++++++++++--
 .../gpu/drm/arm/display/komeda/d71/d71_regs.h |   8 +-
 .../drm/arm/display/komeda/komeda_pipeline.h  |   2 +
 .../display/komeda/komeda_pipeline_state.c    |  17 +++
 4 files changed, 117 insertions(+), 15 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/2 drm/komeda: Add line size support

On D71, we are using the global line size. From D32, every component have a line size register to indicate the fifo size.

So this patch is to set line size support and do the line size check.

---
 .../arm/display/komeda/d71/d71_component.c    | 56 ++++++++++++++++---
 .../gpu/drm/arm/display/komeda/d71/d71_regs.h |  8 +--
 .../drm/arm/display/komeda/komeda_pipeline.h  |  2 +
 .../display/komeda/komeda_pipeline_state.c    | 17 ++++++
 4 files changed, 68 insertions(+), 15 deletions(-)
drivers/gpu/drm/arm/display/komeda/d71/d71_component.c +48 -8
index c985932954cb..a56dc56a72fb 100644
@@ -116,6 +116,23 @@ static void dump_block_header(struct seq_file *sf, void __iomem *reg)
 			   i, hdr.output_ids[i]);
 }
 
+/* On D71, we are using the global line size. From D32, every component have
+ * a line size register to indicate the fifo size.
+ */
+static u32 __get_blk_line_size(struct d71_dev *d71, u32 __iomem *reg,
+			       u32 max_default)
+{
+	if (!d71->periph_addr)
+		max_default = malidp_read32(reg, BLK_MAX_LINE_SIZE);
+
+	return max_default;
+}
+
+static u32 get_blk_line_size(struct d71_dev *d71, u32 __iomem *reg)
+{
+	return __get_blk_line_size(d71, reg, d71->max_line_size);
+}
+
 static u32 to_rot_ctrl(u32 rot)
 {
 	u32 lr_ctrl = 0;
@@ -423,7 +440,27 @@ static int d71_layer_init(struct d71_dev *d71,
 		layer->color_mgr.fgamma_mgr = d71->glb_lt_mgr;
 	}
 
-	set_range(&layer->hsize_in, 4, d71->max_line_size);
+	if (!d71->periph_addr) {
+		/* D32 or newer product */
+		layer->line_sz = malidp_read32(reg, BLK_MAX_LINE_SIZE);
+		layer->yuv_line_sz = L_INFO_YUV_MAX_LINESZ(layer_info);
+	} else if (d71->max_line_size > 2048) {
+		/* D71 4K */
+		layer->line_sz = d71->max_line_size;
+		layer->yuv_line_sz = layer->line_sz / 2;
+	} else  {
+		/* D71 2K */
+		if (layer->layer_type == KOMEDA_FMT_RICH_LAYER) {
+			/* rich layer is 4K configuration */
+			layer->line_sz = d71->max_line_size * 2;
+			layer->yuv_line_sz = layer->line_sz / 2;
+		} else {
+			layer->line_sz = d71->max_line_size;
+			layer->yuv_line_sz = 0;
+		}
+	}
+
+	set_range(&layer->hsize_in, 4, layer->line_sz);
 	set_range(&layer->vsize_in, 4, d71->max_vsize);
 
 	malidp_write32(reg, LAYER_PALPHA, D71_PALPHA_DEF_MAP);
@@ -676,9 +713,11 @@ static int d71_wb_layer_init(struct d71_dev *d71,
 
 	wb_layer = to_layer(c);
 	wb_layer->layer_type = KOMEDA_FMT_WB_LAYER;
+	wb_layer->line_sz = get_blk_line_size(d71, reg);
+	wb_layer->yuv_line_sz = wb_layer->line_sz;
 
-	set_range(&wb_layer->hsize_in, D71_MIN_LINE_SIZE, d71->max_line_size);
-	set_range(&wb_layer->vsize_in, D71_MIN_VERTICAL_SIZE, d71->max_vsize);
+	set_range(&wb_layer->hsize_in, 64, wb_layer->line_sz);
+	set_range(&wb_layer->vsize_in, 64, d71->max_vsize);
 
 	return 0;
 }
@@ -822,8 +861,8 @@ static int d71_compiz_init(struct d71_dev *d71,
 	if (komeda_product_match(d71->mdev, MALIDP_D77_PRODUCT_ID))
 		compiz->support_channel_scaling = true;
 
-	set_range(&compiz->hsize, D71_MIN_LINE_SIZE, d71->max_line_size);
-	set_range(&compiz->vsize, D71_MIN_VERTICAL_SIZE, d71->max_vsize);
+	set_range(&compiz->hsize, 64, get_blk_line_size(d71, reg));
+	set_range(&compiz->vsize, 64, d71->max_vsize);
 
 	return 0;
 }
@@ -980,7 +1019,7 @@ static int d71_scaler_init(struct d71_dev *d71,
 	}
 
 	scaler = to_scaler(c);
-	set_range(&scaler->hsize, 4, 2048);
+	set_range(&scaler->hsize, 4, __get_blk_line_size(d71, reg, 2048));
 	set_range(&scaler->vsize, 4, 4096);
 	scaler->max_downscaling = 6;
 	scaler->max_upscaling = 64;
@@ -1089,7 +1128,7 @@ static int d71_splitter_init(struct d71_dev *d71,
 
 	splitter = to_splitter(c);
 
-	set_range(&splitter->hsize, 4, d71->max_line_size);
+	set_range(&splitter->hsize, 4, get_blk_line_size(d71, reg));
 	set_range(&splitter->vsize, 4, d71->max_vsize);
 
 	return 0;
@@ -1240,7 +1279,8 @@ static int d71_merger_init(struct d71_dev *d71,
 
 	merger = to_merger(c);
 
-	set_range(&merger->hsize_merged, 4, 4032);
+	set_range(&merger->hsize_merged, 4,
+		  __get_blk_line_size(d71, reg, 4032));
 	set_range(&merger->vsize_merged, 4, 4096);
 
 	return 0;
drivers/gpu/drm/arm/display/komeda/d71/d71_regs.h +1 -7
index c1be4594bc92..a58389e623bb 100644
@@ -340,6 +340,7 @@
 #define L_INFO_RF		BIT(0)
 #define L_INFO_CM		BIT(1)
 #define L_INFO_ABUF_SIZE(x)	(((x) >> 4) & 0x7)
+#define L_INFO_YUV_MAX_LINESZ(x)	(((x) >> 16) & 0xFFFF)
 
 /* Scaler registers */
 #define SC_COEFFTAB		0x0DC
@@ -570,13 +571,6 @@ enum d71_blk_type {
 #define D71_DEFAULT_PREPRETCH_LINE	5
 #define D71_BUS_WIDTH_16_BYTES		16
 
-#define D71_MIN_LINE_SIZE		64
-#define D71_MIN_VERTICAL_SIZE		64
-#define D71_SC_MIN_LIN_SIZE		4
-#define D71_SC_MIN_VERTICAL_SIZE	4
-#define D71_SC_MAX_LIN_SIZE		2048
-#define D71_SC_MAX_VERTICAL_SIZE	4096
-
 #define D71_SC_MAX_UPSCALING		64
 #define D71_SC_MAX_DOWNSCALING		6
 #define D71_SC_SPLIT_OVERLAP		8
drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h +2 -0
index 9fe5624172ee..31d392389566 100644
@@ -246,6 +246,8 @@ struct komeda_layer {
 	struct malidp_range hsize_in, vsize_in;
 	struct komeda_color_manager color_mgr;
 	u32 layer_type; /* RICH, SIMPLE or WB */
+	u32 line_sz;
+	u32 yuv_line_sz; /* maximum line size for YUV422 and YUV420 */
 	u32 supported_rots;
 	/* komeda supports layer split which splits a whole image to two parts
 	 * left and right and handle them by two individual layer processors
drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c +17 -0
index 6974c4e081bf..957c1c01ca78 100644
@@ -323,6 +323,7 @@ komeda_layer_check_cfg(struct komeda_layer *layer,
 		       struct komeda_data_flow_cfg *dflow)
 {
 	u32 src_x, src_y, src_w, src_h;
+	u32 line_sz, max_line_sz;
 
 	if (!komeda_fb_is_layer_supported(kfb, layer->layer_type, dflow->rot))
 		return -EINVAL;
@@ -352,6 +353,22 @@ komeda_layer_check_cfg(struct komeda_layer *layer,
 		return -EINVAL;
 	}
 
+	if (drm_rotation_90_or_270(dflow->rot))
+		line_sz = dflow->in_h;
+	else
+		line_sz = dflow->in_w;
+
+	if (kfb->base.format->hsub > 1)
+		max_line_sz = layer->yuv_line_sz;
+	else
+		max_line_sz = layer->line_sz;
+
+	if (line_sz > max_line_sz) {
+		DRM_DEBUG_ATOMIC("Required line_sz: %d exceeds the max size %d\n",
+				 line_sz, max_line_sz);
+		return -EINVAL;
+	}
+
 	return 0;
 }
 
Signature · 6 lines
2.17.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#2 lore raw

PATCH 2/2 drm/komeda: Adds layer horizontal input size limitation check for D71

In reply to Lowry Li (Arm Technology China)

Adds maximum line size check according to the AFBC decoder limitation and special Line size limitation(2046) for format: YUV420_10BIT and X0L2.

---
 .../arm/display/komeda/d71/d71_component.c    | 49 +++++++++++++++++++
 1 file changed, 49 insertions(+)
drivers/gpu/drm/arm/display/komeda/d71/d71_component.c +49 -0
index a56dc56a72fb..41b5bfcbd027 100644
@@ -401,7 +401,56 @@ static void d71_layer_dump(struct komeda_component *c, struct seq_file *sf)
 	seq_printf(sf, "%sAD_V_CROP:\t\t0x%X\n", prefix, v[2]);
 }
 
+static int d71_layer_validate(struct komeda_component *c,
+			      struct komeda_component_state *state)
+{
+	struct komeda_layer_state *st = to_layer_st(state);
+	struct komeda_layer *layer = to_layer(c);
+	struct drm_plane_state *plane_st;
+	struct drm_framebuffer *fb;
+	u32 fourcc, line_sz, max_line_sz;
+
+	plane_st = drm_atomic_get_new_plane_state(state->obj.state,
+						  state->plane);
+	fb = plane_st->fb;
+	fourcc = fb->format->format;
+
+	if (drm_rotation_90_or_270(st->rot))
+		line_sz = st->vsize - st->afbc_crop_t - st->afbc_crop_b;
+	else
+		line_sz = st->hsize - st->afbc_crop_l - st->afbc_crop_r;
+
+	if (fb->modifier) {
+		if ((fb->modifier & AFBC_FORMAT_MOD_BLOCK_SIZE_MASK) ==
+			AFBC_FORMAT_MOD_BLOCK_SIZE_32x8)
+			max_line_sz = layer->line_sz;
+		else
+			max_line_sz = layer->line_sz / 2;
+
+		if (line_sz > max_line_sz) {
+			DRM_DEBUG_ATOMIC("afbc request line_sz: %d exceed the max afbc line_sz: %d.\n",
+					 line_sz, max_line_sz);
+			return -EINVAL;
+		}
+	}
+
+	if (fourcc == DRM_FORMAT_YUV420_10BIT && line_sz > 2046 && (st->afbc_crop_l % 4)) {
+		DRM_DEBUG_ATOMIC("YUV420_10BIT input_hsize: %d exceed the max size 2046.\n",
+				 line_sz);
+		return -EINVAL;
+	}
+
+	if (fourcc == DRM_FORMAT_X0L2 && line_sz > 2046 && (st->addr[0] % 16)) {
+		DRM_DEBUG_ATOMIC("X0L2 input_hsize: %d exceed the max size 2046.\n",
+				 line_sz);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static const struct komeda_component_funcs d71_layer_funcs = {
+	.validate	= d71_layer_validate,
 	.update		= d71_layer_update,
 	.disable	= d71_layer_disable,
 	.dump_register	= d71_layer_dump,
Signature · 1 line
2.17.1