Skip to contentSkip to conversation

power: supply: cpcap-charger: Enable vbus boost voltage

PATCH In review Tony Lindgren 3 participants 4 messages Aug 30, 2019 – Sep 2, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 power: supply: cpcap-charger: Enable vbus boost voltage

We are currently not enabling VBUS boost for cpcap when in host mode. This means the VBUS is fed at the battery voltage level, which can cause flakeyness enumerating devices.

Looks like the boost control for VBUS is CPCAP_BIT_VBUS_SWITCH that we must enable in the charger for nice 4.92 V VBUS output. And looks like we must not use the STBY pin enabling but must instead use manual VBUS control in phy-cpcap-usb.

We want to do this in cpcap_charger_vbus_work() and also set a flag for feeding_vbus to avoid races between USB detection and charger detection, and disable charging if feeding_vbus is set.

Cc Jacopo Mondi <[email protected]>
Cc Kishon Vijay Abraham I <[email protected]>
Cc Marcel Partap <[email protected]>
Cc Merlijn Wajer <[email protected]>
Cc Michael Scott <[email protected]>
Cc Pavel Machek <[email protected]>
Cc Sebastian Reichel <[email protected]>
---
 drivers/phy/motorola/phy-cpcap-usb.c |  8 +++++---
 drivers/power/supply/cpcap-charger.c | 23 ++++++++++++++++++++---
 2 files changed, 25 insertions(+), 6 deletions(-)
drivers/phy/motorola/phy-cpcap-usb.c +5 -3
@@ -231,8 +231,9 @@ static void cpcap_usb_detect(struct work_struct *work)
 			goto out_err;
 
 		error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3,
-					   CPCAP_BIT_VBUSSTBY_EN,
-					   CPCAP_BIT_VBUSSTBY_EN);
+					   CPCAP_BIT_VBUSSTBY_EN |
+					   CPCAP_BIT_VBUSEN_SPI,
+					   CPCAP_BIT_VBUSEN_SPI);
 		if (error)
 			goto out_err;
 
@@ -240,7 +241,8 @@ static void cpcap_usb_detect(struct work_struct *work)
 	}
 
 	error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3,
-				   CPCAP_BIT_VBUSSTBY_EN, 0);
+				   CPCAP_BIT_VBUSSTBY_EN |
+				   CPCAP_BIT_VBUSEN_SPI, 0);
 	if (error)
 		goto out_err;
 
drivers/power/supply/cpcap-charger.c +20 -3
@@ -108,6 +108,9 @@
 #define CPCAP_REG_CRM_ICHRG_1A596	CPCAP_REG_CRM_ICHRG(0xe)
 #define CPCAP_REG_CRM_ICHRG_NO_LIMIT	CPCAP_REG_CRM_ICHRG(0xf)
 
+/* CPCAP_REG_VUSBC register bits needed for VBUS */
+#define CPCAP_BIT_VBUS_SWITCH		BIT(0)	/* VBUS boost to 5V */
+
 enum {
 	CPCAP_CHARGER_IIO_BATTDET,
 	CPCAP_CHARGER_IIO_VOLTAGE,
@@ -130,7 +133,8 @@ struct cpcap_charger_ddata {
 	struct power_supply *usb;
 
 	struct phy_companion comparator;	/* For USB VBUS */
-	bool vbus_enabled;
+	unsigned int vbus_enabled:1;
+	unsigned int feeding_vbus:1;
 	atomic_t active;
 
 	int status;
@@ -325,7 +329,6 @@ static bool cpcap_charger_vbus_valid(struct cpcap_charger_ddata *ddata)
 }
 
 /* VBUS control functions for the USB PHY companion */
-
 static void cpcap_charger_vbus_work(struct work_struct *work)
 {
 	struct cpcap_charger_ddata *ddata;
@@ -343,6 +346,7 @@ static void cpcap_charger_vbus_work(struct work_struct *work)
 			return;
 		}
 
+		ddata->feeding_vbus = true;
 		cpcap_charger_set_cable_path(ddata, false);
 		cpcap_charger_set_inductive_path(ddata, false);
 
@@ -350,12 +354,23 @@ static void cpcap_charger_vbus_work(struct work_struct *work)
 		if (error)
 			goto out_err;
 
+		error = regmap_update_bits(ddata->reg, CPCAP_REG_VUSBC,
+					   CPCAP_BIT_VBUS_SWITCH,
+					   CPCAP_BIT_VBUS_SWITCH);
+		if (error)
+			goto out_err;
+
 		error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM,
 					   CPCAP_REG_CRM_RVRSMODE,
 					   CPCAP_REG_CRM_RVRSMODE);
 		if (error)
 			goto out_err;
 	} else {
+		error = regmap_update_bits(ddata->reg, CPCAP_REG_VUSBC,
+					   CPCAP_BIT_VBUS_SWITCH, 0);
+		if (error)
+			goto out_err;
+
 		error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM,
 					   CPCAP_REG_CRM_RVRSMODE, 0);
 		if (error)
@@ -363,6 +378,7 @@ static void cpcap_charger_vbus_work(struct work_struct *work)
 
 		cpcap_charger_set_cable_path(ddata, true);
 		cpcap_charger_set_inductive_path(ddata, true);
+		ddata->feeding_vbus = false;
 	}
 
 	return;
@@ -431,7 +447,8 @@ static void cpcap_usb_detect(struct work_struct *work)
 	if (error)
 		return;
 
-	if (cpcap_charger_vbus_valid(ddata) && s.chrgcurr1) {
+	if (!ddata->feeding_vbus && cpcap_charger_vbus_valid(ddata) &&
+	    s.chrgcurr1) {
 		int max_current;
 
 		if (cpcap_charger_battery_found(ddata))
Signature · 1 line
2.23.0
#1 lore raw

Hi!

Quoted 4 lines

We are currently not enabling VBUS boost for cpcap when in host mode. This means the VBUS is fed at the battery voltage level, which can cause flakeyness enumerating devices.

Quoted 8 lines

Looks like the boost control for VBUS is CPCAP_BIT_VBUS_SWITCH that we must enable in the charger for nice 4.92 V VBUS output. And looks like we must not use the STBY pin enabling but must instead use manual VBUS control in phy-cpcap-usb.

We want to do this in cpcap_charger_vbus_work() and also set a flag for feeding_vbus to avoid races between USB detection and charger detection, and disable charging if feeding_vbus is set.

I did not know phone is supposed to provide voltage on USB. USB mouse works for me.. in stock android, provided I conect USB hub and external power.

This does not seem to work for me.. and it does not even work on stock kernel. What is going on here?

Is there some kind of debug ineterface where I could test just the vbus switch? I do have voltmeter for the usb port...

Best regards,
Pavel

Quoted 106 lines
drivers/phy/motorola/phy-cpcap-usb.c +5 -3
@@ -231,8 +231,9 @@ static void cpcap_usb_detect(struct work_struct *work)
 			goto out_err;
 
 		error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3,
-					   CPCAP_BIT_VBUSSTBY_EN,
-					   CPCAP_BIT_VBUSSTBY_EN);
+					   CPCAP_BIT_VBUSSTBY_EN |
+					   CPCAP_BIT_VBUSEN_SPI,
+					   CPCAP_BIT_VBUSEN_SPI);
 		if (error)
 			goto out_err;
 
@@ -240,7 +241,8 @@ static void cpcap_usb_detect(struct work_struct *work)
 	}
 
 	error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3,
-				   CPCAP_BIT_VBUSSTBY_EN, 0);
+				   CPCAP_BIT_VBUSSTBY_EN |
+				   CPCAP_BIT_VBUSEN_SPI, 0);
 	if (error)
 		goto out_err;
 
drivers/power/supply/cpcap-charger.c +20 -3
@@ -108,6 +108,9 @@
 #define CPCAP_REG_CRM_ICHRG_1A596	CPCAP_REG_CRM_ICHRG(0xe)
 #define CPCAP_REG_CRM_ICHRG_NO_LIMIT	CPCAP_REG_CRM_ICHRG(0xf)
 
+/* CPCAP_REG_VUSBC register bits needed for VBUS */
+#define CPCAP_BIT_VBUS_SWITCH		BIT(0)	/* VBUS boost to 5V */
+
 enum {
 	CPCAP_CHARGER_IIO_BATTDET,
 	CPCAP_CHARGER_IIO_VOLTAGE,
@@ -130,7 +133,8 @@ struct cpcap_charger_ddata {
 	struct power_supply *usb;
 
 	struct phy_companion comparator;	/* For USB VBUS */
-	bool vbus_enabled;
+	unsigned int vbus_enabled:1;
+	unsigned int feeding_vbus:1;
 	atomic_t active;
 
 	int status;
@@ -325,7 +329,6 @@ static bool cpcap_charger_vbus_valid(struct cpcap_charger_ddata *ddata)
 }
 
 /* VBUS control functions for the USB PHY companion */
-
 static void cpcap_charger_vbus_work(struct work_struct *work)
 {
 	struct cpcap_charger_ddata *ddata;
@@ -343,6 +346,7 @@ static void cpcap_charger_vbus_work(struct work_struct *work)
 			return;
 		}
 
+		ddata->feeding_vbus = true;
 		cpcap_charger_set_cable_path(ddata, false);
 		cpcap_charger_set_inductive_path(ddata, false);
 
@@ -350,12 +354,23 @@ static void cpcap_charger_vbus_work(struct work_struct *work)
 		if (error)
 			goto out_err;
 
+		error = regmap_update_bits(ddata->reg, CPCAP_REG_VUSBC,
+					   CPCAP_BIT_VBUS_SWITCH,
+					   CPCAP_BIT_VBUS_SWITCH);
+		if (error)
+			goto out_err;
+
 		error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM,
 					   CPCAP_REG_CRM_RVRSMODE,
 					   CPCAP_REG_CRM_RVRSMODE);
 		if (error)
 			goto out_err;
 	} else {
+		error = regmap_update_bits(ddata->reg, CPCAP_REG_VUSBC,
+					   CPCAP_BIT_VBUS_SWITCH, 0);
+		if (error)
+			goto out_err;
+
 		error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM,
 					   CPCAP_REG_CRM_RVRSMODE, 0);
 		if (error)
@@ -363,6 +378,7 @@ static void cpcap_charger_vbus_work(struct work_struct *work)
 
 		cpcap_charger_set_cable_path(ddata, true);
 		cpcap_charger_set_inductive_path(ddata, true);
+		ddata->feeding_vbus = false;
 	}
 
 	return;
@@ -431,7 +447,8 @@ static void cpcap_usb_detect(struct work_struct *work)
 	if (error)
 		return;
 
-	if (cpcap_charger_vbus_valid(ddata) && s.chrgcurr1) {
+	if (!ddata->feeding_vbus && cpcap_charger_vbus_valid(ddata) &&
+	    s.chrgcurr1) {
 		int max_current;
 
 		if (cpcap_charger_battery_found(ddata))
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
#2 lore raw
Quoted 11 lines · Pavel Machek

Hi!

Quoted 9 lines

We are currently not enabling VBUS boost for cpcap when in host mode. This means the VBUS is fed at the battery voltage level, which can cause flakeyness enumerating devices.

Looks like the boost control for VBUS is CPCAP_BIT_VBUS_SWITCH that we must enable in the charger for nice 4.92 V VBUS output. And looks like we must not use the STBY pin enabling but must instead use manual VBUS control in phy-cpcap-usb.

Quoted 7 lines
Quoted 3 lines

We want to do this in cpcap_charger_vbus_work() and also set a flag for feeding_vbus to avoid races between USB detection and charger detection, and disable charging if feeding_vbus is set.

I did not know phone is supposed to provide voltage on USB. USB mouse works for me.. in stock android, provided I conect USB hub and external power.

Yup that's standard USB OTG feature when ID pin is grounded.

Quoted 2 lines

This does not seem to work for me.. and it does not even work on stock kernel. What is going on here?

Sounds like you're missing a USB micro-B cable with ID pin grounded and trying to use debugfs/sysfs instead to force the host mode.

Quoted 2 lines

Is there some kind of debug ineterface where I could test just the vbus switch? I do have voltmeter for the usb port...

Yeah well.. just ground the ID pin :) No debug interface should be needed here.

If you really wanted to add some kind of debugfs interface for forcing host mode without ID pin grounded, you could try to have the USB phy driver enable ID pin pull-down via sysfs. That's the cpcap PMIC in this case, I think some combination of CPCAP_BIT_ID* bits might do the trick.

Regards,

Tony

#3 lore raw
In reply to Tony Lindgren

Hi,

Quoted 22 lines · Tony Lindgren

We are currently not enabling VBUS boost for cpcap when in host mode. This means the VBUS is fed at the battery voltage level, which can cause flakeyness enumerating devices.

Looks like the boost control for VBUS is CPCAP_BIT_VBUS_SWITCH that we must enable in the charger for nice 4.92 V VBUS output. And looks like we must not use the STBY pin enabling but must instead use manual VBUS control in phy-cpcap-usb.

We want to do this in cpcap_charger_vbus_work() and also set a flag for feeding_vbus to avoid races between USB detection and charger detection, and disable charging if feeding_vbus is set.

Cc Jacopo Mondi <[email protected]>
Cc Kishon Vijay Abraham I <[email protected]>
Cc Marcel Partap <[email protected]>
Cc Merlijn Wajer <[email protected]>
Cc Michael Scott <[email protected]>
Cc Pavel Machek <[email protected]>
Cc Sebastian Reichel <[email protected]>
Quoted 1 line

---

Thanks, queued.

-- Sebastian

Quoted 112 lines
 drivers/phy/motorola/phy-cpcap-usb.c |  8 +++++---
 drivers/power/supply/cpcap-charger.c | 23 ++++++++++++++++++++---
 2 files changed, 25 insertions(+), 6 deletions(-)
drivers/phy/motorola/phy-cpcap-usb.c +5 -3
@@ -231,8 +231,9 @@ static void cpcap_usb_detect(struct work_struct *work)
 			goto out_err;
 
 		error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3,
-					   CPCAP_BIT_VBUSSTBY_EN,
-					   CPCAP_BIT_VBUSSTBY_EN);
+					   CPCAP_BIT_VBUSSTBY_EN |
+					   CPCAP_BIT_VBUSEN_SPI,
+					   CPCAP_BIT_VBUSEN_SPI);
 		if (error)
 			goto out_err;
 
@@ -240,7 +241,8 @@ static void cpcap_usb_detect(struct work_struct *work)
 	}
 
 	error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3,
-				   CPCAP_BIT_VBUSSTBY_EN, 0);
+				   CPCAP_BIT_VBUSSTBY_EN |
+				   CPCAP_BIT_VBUSEN_SPI, 0);
 	if (error)
 		goto out_err;
 
drivers/power/supply/cpcap-charger.c +20 -3
@@ -108,6 +108,9 @@
 #define CPCAP_REG_CRM_ICHRG_1A596	CPCAP_REG_CRM_ICHRG(0xe)
 #define CPCAP_REG_CRM_ICHRG_NO_LIMIT	CPCAP_REG_CRM_ICHRG(0xf)
 
+/* CPCAP_REG_VUSBC register bits needed for VBUS */
+#define CPCAP_BIT_VBUS_SWITCH		BIT(0)	/* VBUS boost to 5V */
+
 enum {
 	CPCAP_CHARGER_IIO_BATTDET,
 	CPCAP_CHARGER_IIO_VOLTAGE,
@@ -130,7 +133,8 @@ struct cpcap_charger_ddata {
 	struct power_supply *usb;
 
 	struct phy_companion comparator;	/* For USB VBUS */
-	bool vbus_enabled;
+	unsigned int vbus_enabled:1;
+	unsigned int feeding_vbus:1;
 	atomic_t active;
 
 	int status;
@@ -325,7 +329,6 @@ static bool cpcap_charger_vbus_valid(struct cpcap_charger_ddata *ddata)
 }
 
 /* VBUS control functions for the USB PHY companion */
-
 static void cpcap_charger_vbus_work(struct work_struct *work)
 {
 	struct cpcap_charger_ddata *ddata;
@@ -343,6 +346,7 @@ static void cpcap_charger_vbus_work(struct work_struct *work)
 			return;
 		}
 
+		ddata->feeding_vbus = true;
 		cpcap_charger_set_cable_path(ddata, false);
 		cpcap_charger_set_inductive_path(ddata, false);
 
@@ -350,12 +354,23 @@ static void cpcap_charger_vbus_work(struct work_struct *work)
 		if (error)
 			goto out_err;
 
+		error = regmap_update_bits(ddata->reg, CPCAP_REG_VUSBC,
+					   CPCAP_BIT_VBUS_SWITCH,
+					   CPCAP_BIT_VBUS_SWITCH);
+		if (error)
+			goto out_err;
+
 		error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM,
 					   CPCAP_REG_CRM_RVRSMODE,
 					   CPCAP_REG_CRM_RVRSMODE);
 		if (error)
 			goto out_err;
 	} else {
+		error = regmap_update_bits(ddata->reg, CPCAP_REG_VUSBC,
+					   CPCAP_BIT_VBUS_SWITCH, 0);
+		if (error)
+			goto out_err;
+
 		error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM,
 					   CPCAP_REG_CRM_RVRSMODE, 0);
 		if (error)
@@ -363,6 +378,7 @@ static void cpcap_charger_vbus_work(struct work_struct *work)
 
 		cpcap_charger_set_cable_path(ddata, true);
 		cpcap_charger_set_inductive_path(ddata, true);
+		ddata->feeding_vbus = false;
 	}
 
 	return;
@@ -431,7 +447,8 @@ static void cpcap_usb_detect(struct work_struct *work)
 	if (error)
 		return;
 
-	if (cpcap_charger_vbus_valid(ddata) && s.chrgcurr1) {
+	if (!ddata->feeding_vbus && cpcap_charger_vbus_valid(ddata) &&
+	    s.chrgcurr1) {
 		int max_current;
 
 		if (cpcap_charger_battery_found(ddata))
Signature · 1 line
2.23.0