amlogic: Add Khadas VIM3 support
Subsystems (6)
v2 cover amlogic: Add Khadas VIM3 support
Hi Neil,
This mini-series adds initial support for Amlogic A311D based Khadas VIM3.
v2 fixes an oversight and adds some cleanups.
Regards,
Andreas
v1 -> v2:
* Fixed branch name in README
* Mention linux-next tag for DT/header import (Neil)
* Avoid "Unknown" SoC output for A311D, fixing a typo while at it
Andreas Färber (4):
arm: dts: Import and update DT for Khadas VIM3
configs: Add Khadas VIM3 defconfig
arm: meson: Tidy SoC information output
arm: meson: Recognize A311D SoC
arch/arm/dts/Makefile | 3 +- arch/arm/dts/meson-g12-common.dtsi | 2435 ++++++++++++++++++++ arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts | 15 + arch/arm/dts/meson-g12b-a311d.dtsi | 149 ++ arch/arm/dts/meson-g12b-khadas-vim3.dtsi | 544 +++++ arch/arm/dts/meson-g12b.dtsi | 39 +- arch/arm/mach-meson/board-info.c | 3 +- board/amlogic/w400/MAINTAINERS | 1 + board/amlogic/w400/README.khadas-vim3 | 132 ++ configs/khadas-vim3_defconfig | 54 + include/dt-bindings/clock/g12a-clkc.h | 6 + include/dt-bindings/power/meson-g12a-power.h | 13 + .../reset/amlogic,meson-g12a-audio-reset.h | 38 + 13 files changed, 3427 insertions(+), 5 deletions(-) create mode 100644 arch/arm/dts/meson-g12-common.dtsi create mode 100644 arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts create mode 100644 arch/arm/dts/meson-g12b-a311d.dtsi create mode 100644 arch/arm/dts/meson-g12b-khadas-vim3.dtsi create mode 100644 board/amlogic/w400/README.khadas-vim3 create mode 100644 configs/khadas-vim3_defconfig create mode 100644 include/dt-bindings/power/meson-g12a-power.h create mode 100644 include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h
Signature · 1 line
2.16.4
PATCH v2 1/4 arm: dts: Import and update DT for Khadas VIM3
In Linux meson-g12-common.dtsi was introduced as well as new g12b nodes and headers, as dependencies of new meson-g12b-a311d-khadas-vim3.dts.
Copied from next-20190830.
---
v1 -> v2:
* Mention linux-next tag for DT/header import (Neil)
arch/arm/dts/Makefile | 3 +- arch/arm/dts/meson-g12-common.dtsi | 2435 ++++++++++++++++++++ arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts | 15 + arch/arm/dts/meson-g12b-a311d.dtsi | 149 ++ arch/arm/dts/meson-g12b-khadas-vim3.dtsi | 544 +++++ arch/arm/dts/meson-g12b.dtsi | 39 +- include/dt-bindings/clock/g12a-clkc.h | 6 + include/dt-bindings/power/meson-g12a-power.h | 13 + .../reset/amlogic,meson-g12a-audio-reset.h | 38 + 9 files changed, 3238 insertions(+), 4 deletions(-) create mode 100644 arch/arm/dts/meson-g12-common.dtsi create mode 100644 arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts create mode 100644 arch/arm/dts/meson-g12b-a311d.dtsi create mode 100644 arch/arm/dts/meson-g12b-khadas-vim3.dtsi create mode 100644 include/dt-bindings/power/meson-g12a-power.h create mode 100644 include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h
arch/arm/dts/Makefile +2 -1
@@ -141,7 +141,8 @@ dtb-$(CONFIG_ARCH_MESON) += \ meson-axg-s400.dtb \ meson-g12a-u200.dtb \ meson-g12a-sei510.dtb \ - meson-g12b-odroid-n2.dtb + meson-g12b-odroid-n2.dtb \ + meson-g12b-a311d-khadas-vim3.dtb dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \
arch/arm/dts/meson-g12-common.dtsi new file +2435 -0
2,435 lines not on this page · raw message
arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts new file +15 -0
@@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <[email protected]> + * Copyright (c) 2019 Christian Hewitt <[email protected]> + */ + +/dts-v1/; + +#include "meson-g12b-a311d.dtsi" +#include "meson-g12b-khadas-vim3.dtsi" + +/ { + compatible = "khadas,vim3", "amlogic,a311d", "amlogic,g12b"; +};
arch/arm/dts/meson-g12b-a311d.dtsi new file +149 -0
149 lines not on this page · raw message
arch/arm/dts/meson-g12b-khadas-vim3.dtsi new file +544 -0
392 lines not on this page · raw message
include/dt-bindings/power/meson-g12a-power.h new file +13 -0
Lines of this file are not shown. View the raw message.
include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h new file +38 -0
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.16.4
Part of the diff is not shown here. View the raw message.
PATCH v2 2/4 configs: Add Khadas VIM3 defconfig
In reply to Andreas FärberDerived from odroid-n2_defconfig and README.odroid-n2.
---
v1 -> v2:
* Fixed branch name in README
board/amlogic/w400/MAINTAINERS | 1 + board/amlogic/w400/README.khadas-vim3 | 132 ++++++++++++++++++++++++++++++++++ configs/khadas-vim3_defconfig | 54 ++++++++++++++ 3 files changed, 187 insertions(+) create mode 100644 board/amlogic/w400/README.khadas-vim3 create mode 100644 configs/khadas-vim3_defconfig
board/amlogic/w400/MAINTAINERS +1 -0
@@ -3,4 +3,5 @@ M: Neil Armstrong <[email protected]> S: Maintained L: u-boot-amlogic at groups.io F: board/amlogic/w400/ +F: configs/khadas-vim3_defconfig F: configs/odroid-n2_defconfig
board/amlogic/w400/README.khadas-vim3 new file +132 -0
132 lines not on this page · raw message
configs/khadas-vim3_defconfig new file +54 -0
54 lines not on this page · raw message
Signature · 1 line
2.16.4
PATCH v2 3/4 arm: meson: Tidy SoC information output
In reply to Andreas FärberWrite SoC instead of Soc. The Linux driver is not affected.
---
v2: New
arch/arm/mach-meson/board-info.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-meson/board-info.c +1 -1
@@ -154,7 +154,7 @@ int show_board_info(void)/* print board information */ print_board_model (); - printf("Soc: Amlogic Meson %s (%s) Revision %x:%x (%x:%x)\n", + printf("SoC: Amlogic Meson %s (%s) Revision %x:%x (%x:%x)\n", socinfo_to_soc_id(socinfo), socinfo_to_package_id(socinfo), socinfo_to_major(socinfo),
Signature · 1 line
2.16.4
PATCH v2 4/4 arm: meson: Recognize A311D SoC
In reply to Andreas FärberValues imported from Linux driver, but in correct numeric order.
Khadas VIM3 prints: Amlogic Meson G12B (A311D) Revision 29:b (10:2)
---
v2: New
arch/arm/mach-meson/board-info.c | 1 + 1 file changed, 1 insertion(+)
arch/arm/mach-meson/board-info.c +1 -0
@@ -59,6 +59,7 @@ static const struct meson_gx_package_id { { "A113D", 0x25, 0x22, 0xff }, { "S905D2", 0x28, 0x10, 0xf0 }, { "S905X2", 0x28, 0x40, 0xf0 }, + { "A311D", 0x29, 0x10, 0xf0 }, { "S922X", 0x29, 0x40, 0xf0 }, };
Signature · 1 line
2.16.4
v2 cover amlogic: Add Khadas VIM3 support
In reply to Andreas FärberHi Andreas,
Quoted 6 lines · Andreas Färber
Hi Neil,
This mini-series adds initial support for Amlogic A311D based Khadas VIM3.
v2 fixes an oversight and adds some cleanups.
Quoted 7 lines
Regards,
Andreasv1 -> v2:
* Fixed branch name in README
* Mention linux-next tag for DT/header import (Neil)
* Avoid "Unknown" SoC output for A311D, fixing a typo while at it
Do you have time to rebase patch 1 on Linux v5.3-rc1 ? Or do you allow me to rebase it myself ?
Neil
Quoted 32 lines
Cc Neil Armstrong <[email protected]>Andreas Färber (4):
arm: dts: Import and update DT for Khadas VIM3
configs: Add Khadas VIM3 defconfig
arm: meson: Tidy SoC information output
arm: meson: Recognize A311D SoCarch/arm/dts/Makefile | 3 +- arch/arm/dts/meson-g12-common.dtsi | 2435 ++++++++++++++++++++ arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts | 15 + arch/arm/dts/meson-g12b-a311d.dtsi | 149 ++ arch/arm/dts/meson-g12b-khadas-vim3.dtsi | 544 +++++ arch/arm/dts/meson-g12b.dtsi | 39 +- arch/arm/mach-meson/board-info.c | 3 +- board/amlogic/w400/MAINTAINERS | 1 + board/amlogic/w400/README.khadas-vim3 | 132 ++ configs/khadas-vim3_defconfig | 54 + include/dt-bindings/clock/g12a-clkc.h | 6 + include/dt-bindings/power/meson-g12a-power.h | 13 + .../reset/amlogic,meson-g12a-audio-reset.h | 38 + 13 files changed, 3427 insertions(+), 5 deletions(-) create mode 100644 arch/arm/dts/meson-g12-common.dtsi create mode 100644 arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts create mode 100644 arch/arm/dts/meson-g12b-a311d.dtsi create mode 100644 arch/arm/dts/meson-g12b-khadas-vim3.dtsi create mode 100644 board/amlogic/w400/README.khadas-vim3 create mode 100644 configs/khadas-vim3_defconfig create mode 100644 include/dt-bindings/power/meson-g12a-power.h create mode 100644 include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h