colo: Add support for continious replication
Subsystems (2)
v2 cover colo: Add support for continious replication
Hello Everyone,
These Patches add support for continious replication to colo. Please review.
Regards,
Lukas Straub
v2:
- fix email formating
- fix checkpatch.pl warnings
- fix patchew error
- clearer commit messages
Lukas Straub (3):
Replication: Ignore requests after failover net/filter.c: Add Options to insert filters anywhere in the filter
list
Update Documentation
block/replication.c | 38 ++++++++- docs/COLO-FT.txt | 185 ++++++++++++++++++++++++++++++++----------- include/net/filter.h | 2 + net/filter.c | 71 ++++++++++++++++- qemu-options.hx | 10 +-- 5 files changed, 250 insertions(+), 56 deletions(-)
--
2.20.1
PATCH v2 1/3 Replication: Ignore requests after failover
After failover the Secondary side of replication shouldn't change state, because it now functions as our primary disk.
In replication_start, replication_do_checkpoint, replication_stop, ignore the request if current state is BLOCK_REPLICATION_DONE (sucessful failover) or BLOCK_REPLICATION_FAILOVER (failover in progres i.e. currently merging active and hidden images into the base image).
--- block/replication.c | 38 +++++++++++++++++++++++++++++++++++--- 1 file changed, 35 insertions(+), 3 deletions(-)
block/replication.c +35 -3
@@ -454,6 +454,17 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,aio_context_acquire (aio_context); s = bs->opaque; +if (s->stage ==BLOCK_REPLICATION_DONE || + s->stage ==BLOCK_REPLICATION_FAILOVER ) { +/* +* This case happens when a secondary is promoted to primary. +* Ignore the request because the secondary side of replication +* doesn't have to do anything anymore. +*/ +aio_context_release (aio_context); +return ; + } +if (s->stage !=BLOCK_REPLICATION_NONE ) {error_setg (errp,"Block replication is running or done" );aio_context_release (aio_context);
@@ -529,8 +540,7 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode, "Block device is in use by internal backup job"); top_bs =bdrv_lookup_bs (s->top_id, s->top_id,NULL ); -if (!top_bs || !bdrv_is_root_node (top_bs) || - !check_top_bs (top_bs, bs)) { +if (!top_bs || !check_top_bs (top_bs, bs)) {error_setg (errp,"No top_bs or it is invalid" );reopen_backing_file (bs, false,NULL );aio_context_release (aio_context);
@@ -577,6 +587,17 @@ static void replication_do_checkpoint(ReplicationState *rs, Error **errp)aio_context_acquire (aio_context); s = bs->opaque; +if (s->stage ==BLOCK_REPLICATION_DONE || + s->stage ==BLOCK_REPLICATION_FAILOVER ) { +/* +* This case happens when a secondary was promoted to primary. +* Ignore the request because the secondary side of replication +* doesn't have to do anything anymore. +*/ +aio_context_release (aio_context); +return ; + } +if (s->mode ==REPLICATION_MODE_SECONDARY ) {secondary_do_checkpoint (s, errp); }
@@ -593,7 +614,7 @@ static void replication_get_error(ReplicationState *rs, Error **errp)aio_context_acquire (aio_context); s = bs->opaque; -if (s->stage !=BLOCK_REPLICATION_RUNNING ) { +if (s->stage ==BLOCK_REPLICATION_NONE ) {error_setg (errp,"Block replication is not running" );aio_context_release (aio_context);return ;
@@ -635,6 +656,17 @@ static void replication_stop(ReplicationState *rs, bool failover, Error **errp)aio_context_acquire (aio_context); s = bs->opaque; +if (s->stage ==BLOCK_REPLICATION_DONE || + s->stage ==BLOCK_REPLICATION_FAILOVER ) { +/* +* This case happens when a secondary was promoted to primary. +* Ignore the request because the secondary side of replication +* doesn't have to do anything anymore. +*/ +aio_context_release (aio_context); +return ; + } +if (s->stage !=BLOCK_REPLICATION_RUNNING ) {error_setg (errp,"Block replication is not running" );aio_context_release (aio_context);
--
2.20.1
PATCH v2 2/3 net/filter.c: Add Options to insert filters anywhere in the filter list
In reply to Lukas StraubTo switch the Secondary to Primary, we need to insert new filters before the filter-rewriter.
Add the options insert= and position= to be able to insert filters anywhere in the filter list.
position should be either "head", "tail" or the id of another filter. insert should be either "before" or "after" to specify where to insert the new filter relative to the one specified with position.
--- include/net/filter.h | 2 ++ net/filter.c | 71 +++++++++++++++++++++++++++++++++++++++++++- qemu-options.hx | 10 +++---- 3 files changed, 77 insertions(+), 6 deletions(-)
include/net/filter.h +2 -0
@@ -62,6 +62,8 @@ struct NetFilterState {NetClientState *netdev;NetFilterDirection direction;bool on; +char *position; +bool insert_before;QTAILQ_ENTRY (NetFilterState) next; };
net/filter.c +70 -1
111 lines not on this page · raw message
qemu-options.hx +5 -5
@@ -4368,7 +4368,7 @@ applications, they can do this through this parameter. Its format is a gnutls priority string as described at @url{https://gnutls.org/manual/html_node/Priority-Strings.html}. -@item -object filter-buffer,id=@var{id},netdev=@var{netdevid},interval=@var{t}[,queue=@var{all|rx|tx}][,status=@var{on|off}] +@item -object filter-buffer,id=@var{id},netdev=@var{netdevid},interval=@var{t}[,queue=@var{all|rx|tx}][,status=@var{on|off}][,position=@var{head|tail|id}][,insert=@var{after|before}] Interval @var{t} can't be 0, this filter batches the packet delivery: all packets arriving in a given interval on netdev @var{netdevid} are delayed
@@ -4387,11 +4387,11 @@ queue @var{all|rx|tx} is an option that can be applied to any netfilter. @option{tx}: the filter is attached to the transmit queue of the netdev, where it will receive packets sent by the netdev. -@item -object filter-mirror,id=@var{id},netdev=@var{netdevid},outdev=@var{chardevid},queue=@var{all|rx|tx}[,vnet_hdr_support] +@item -object filter-mirror,id=@var{id},netdev=@var{netdevid},outdev=@var{chardevid},queue=@var{all|rx|tx}[,vnet_hdr_support][,position=@var{head|tail|id}][,insert=@var{after|before}] filter-mirror on netdev @var{netdevid},mirror net packet to chardev@var{chardevid}, if it has the vnet_hdr_support flag, filter-mirror will mirror packet with vnet_hdr_len. -@item -object filter-redirector,id=@var{id},netdev=@var{netdevid},indev=@var{chardevid},outdev=@var{chardevid},queue=@var{all|rx|tx}[,vnet_hdr_support] +@item -object filter-redirector,id=@var{id},netdev=@var{netdevid},indev=@var{chardevid},outdev=@var{chardevid},queue=@var{all|rx|tx}[,vnet_hdr_support][,position=@var{head|tail|id}][,insert=@var{after|before}] filter-redirector on netdev @var{netdevid},redirect filter's net packet to chardev @var{chardevid},and redirect indev's packet to filter.if it has the vnet_hdr_support flag,
@@ -4400,7 +4400,7 @@ Create a filter-redirector we need to differ outdev id from indev id, id can not be the same. we can just use indev or outdev, but at least one of indev or outdev need to be specified. -@item -object filter-rewriter,id=@var{id},netdev=@var{netdevid},queue=@var{all|rx|tx},[vnet_hdr_support] +@item -object filter-rewriter,id=@var{id},netdev=@var{netdevid},queue=@var{all|rx|tx},[vnet_hdr_support][,position=@var{head|tail|id}][,insert=@var{after|before}] Filter-rewriter is a part of COLO project.It will rewrite tcp packet to secondary from primary to keep secondary tcp connection,and rewrite
@@ -4413,7 +4413,7 @@ colo secondary: -object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1 -object filter-rewriter,id=rew0,netdev=hn0,queue=all -@item -object filter-dump,id=@var{id},netdev=@var{dev}[,file=@var{filename}][,maxlen=@var{len}] +@item -object filter-dump,id=@var{id},netdev=@var{dev}[,file=@var{filename}][,maxlen=@var{len}][,position=@var{head|tail|id}][,insert=@var{after|before}] Dump the network traffic on netdev @var{dev} to the file specified by @var{filename}. At most @var{len} bytes (64k by default) per packet are stored.
--
2.20.1
Re: [Qemu-devel] [PATCH v2 2/3] net/filter.c: Add Options to insert filters anywhere in the filter list
Quoted 15 lines
-----Original Message-----
From: Lukas Straub [mailto:[email protected]]
Sent: Friday, August 16, 2019 2:49 AM
To: qemu-devel <[email protected]>
Cc: Zhang, Chen <[email protected]>; Jason Wang <[email protected]>; Wen Congyang <[email protected]>; Xie Changlong <[email protected]>
Subject: [PATCH v2 2/3]net/filter.c: Add Options to insert filters anywhere in the filter listTo switch the Secondary to Primary, we need to insert new filters before the filter-rewriter.
Quoted 7 lines
Add the options insert= and position= to be able to insert filters anywhere in the filter list.
position should be either "head", "tail" or the id of another filter. insert should be either "before" or "after" to specify where to insert the new filter relative to the one specified with position.
Hi Lukas,
It looks no need to add the "insert = xxx" for this operation. For example:
We have 3 net-filters, the running order like that:
Fiter1 ----------> Filter2 ------------> Filter3
If we want to add another filter between filter1 and filter2.
The "Position = head, insert = after" always seam with "position = filter2 id, insert = before". It seems the "insert" is a redundant args. So I think it is enough with the "position", we can make the "insert" always equal "after" except the "head".
Thanks
Zhang Chen
Quoted 210 lines
Signed-off-by Lukas Straub <[email protected]>--- include/net/filter.h | 2 ++ net/filter.c | 71 +++++++++++++++++++++++++++++++++++++++++++- qemu-options.hx | 10 +++---- 3 files changed, 77 insertions(+), 6 deletions(-)include/net/filter.h index renamed from include/net/filter.h +0
-0
49da666ac0..355c178f75100644include/net/filter.h +2
-0@@ -62,6 +62,8 @@ struct NetFilterState {NetClientState *netdev;NetFilterDirection direction;bool on; +char *position; +bool insert_before;QTAILQ_ENTRY (NetFilterState) next; };net/filter.c +55
-0@@ -171,11 +171,47 @@ static void netfilter_set_status(Object *obj, const char *str, Error **errp) } } +static char *netfilter_get_position (Object *obj,Error **errp) { +NetFilterState *nf =NETFILTER (obj); + +return g_strdup (nf->position); +} + +static void netfilter_set_position (Object *obj,const char *str,Error +**errp) { +NetFilterState *nf =NETFILTER (obj); + + nf->position =g_strdup (str); +} + +static char *netfilter_get_insert (Object *obj,Error **errp) { +NetFilterState *nf =NETFILTER (obj); + +return nf->insert_before ?g_strdup ("before" ) :g_strdup ("after" ); +} + +static void netfilter_set_insert (Object *obj,const char *str,Error +**errp) { +NetFilterState *nf =NETFILTER (obj); + +if (strcmp (str,"before" ) &&strcmp (str,"after" )) { +error_setg (errp,"Invalid value for netfilter insert, " +"should be 'head' or 'tail'" ); +return ; + } + + nf->insert_before = !strcmp (str,"before" ); } +static void netfilter_init (Object *obj) {NetFilterState *nf =NETFILTER (obj); nf->on = true; + nf->insert_before = false; + nf->position =g_strdup ("tail" );object_property_add_str (obj,"netdev" , netfilter_get_netdev_id, netfilter_set_netdev_id, @@ -187,11 +223,18 @@ static void netfilter_init(Object *obj) object_property_add_str(obj, "status", netfilter_get_status, netfilter_set_status, NULL); + object_property_add_str(obj, "position", + netfilter_get_position, netfilter_set_position, + NULL); +object_property_add_str (obj,"insert" , + netfilter_get_insert, netfilter_set_insert, + NULL); }static void netfilter_complete (UserCreatable *uc,Error **errp) {NetFilterState *nf =NETFILTER (uc); +NetFilterState *position =NULL ;NetClientState *ncs[MAX_QUEUE_NUM ];NetFilterClass *nfc =NETFILTER_GET_CLASS (uc);int queues;@@ -219,6 +262,20 @@ static void netfilter_complete(UserCreatable *uc, Error **errp) return; } +if (strcmp (nf->position,"head" ) &&strcmp (nf->position,"tail" )) { +/* Search for the position to insert before/after */ +Object *container; +Object *obj; + + container =object_get_objects_root (); + obj =object_resolve_path_component (container, nf->position); +if (!obj) { +error_setg (errp,"filter '%s' not found" , nf->position); +return ; + } + position =NETFILTER (obj); + } + nf->netdev = ncs[0 ];if (nfc->setup) {net/filter.c +12
-1@@ -228,7 +285,18 @@ static void netfilter_complete(UserCreatable *uc, Error **errp) return; } } -QTAILQ_INSERT_TAIL (&nf->netdev->filters, nf, next); + +if (position) { +if (nf->insert_before) { +QTAILQ_INSERT_BEFORE (position, nf, next); + }else { +QTAILQ_INSERT_AFTER (&nf->netdev->filters, position, nf, next); + } + }else if (!strcmp (nf->position,"head" )) { +QTAILQ_INSERT_HEAD (&nf->netdev->filters, nf, next); + }else if (!strcmp (nf->position,"tail" )) { +QTAILQ_INSERT_TAIL (&nf->netdev->filters, nf, next); + } }static void
netfilter_finalize(Object *obj)@@ -245,6 +313,7 @@ static voidnetfilter_finalize(Object *obj)QTAILQ_REMOVE(&nf->netdev->filters, nf, next); } g_free(nf->netdev_id);net/filter.c +1
-0+g_free (nf->position); }static void default_handle_event (NetFilterState *nf,int event,Error **errp)qemu-options.hx index 08749a3391..f0a47a0746 renamed from qemu-options.hx +0
-0100644
qemu-options.hx +0
-0@@ -4368,7 +4368,7 @@ applications, they can do this through this parameter.Its format is a gnutls priority string as described at @url{https://gnutls.org/manual/html_node/Priority-Strings.html}.
-@item -object filter- buffer,id=@var{id},netdev=@var{netdevid},interval=@var{t}[,queue=@var{all|r x|tx}][,status=@var{on|off}]
+@item -objectqemu-options.hx +3
-0+filter-buffer,id=@var{id},netdev=@var{netdevid},interval=@var{t}[,queue +=@var{all|rx|tx}][,status=@var{on|off}][,position=@var{head|tail|id}][, +insert=@var{after|before}] Interval @var{t} can't be 0, this filter batches the packet delivery: all packetsarriving in a given interval on netdev @var{netdevid} are delayed @@ -4387,11 +4387,11 @@ queue @var{all|rx|tx} is an option that can be applied to any netfilter.
@option{tx}: the filter is attached to the transmit queue of the netdev,
where it will receive packets sent by the netdev.-@item -object filter- mirror,id=@var{id},netdev=@var{netdevid},outdev=@var{chardevid},queue=@v ar{all|rx|tx}[,vnet_hdr_support]
+@item -objectqemu-options.hx +3
-0+filter-mirror,id=@var{id},netdev=@var{netdevid},outdev=@var{chardevid}, +queue=@var{all|rx|tx}[,vnet_hdr_support][,position=@var{head|tail|id}][ +,insert=@var{after|before}] filter-mirror on netdev @var{netdevid},mirror net packet tochardev@var{chardevid}, if it has the
vnet_hdr_supportflag, filter-mirror will mirror packet withvnet_hdr_len.-@item -object filter- redirector,id=@var{id},netdev=@var{netdevid},indev=@var{chardevid},outdev= @var{chardevid},queue=@var{all|rx|tx}[,vnet_hdr_support] +@item -object
qemu-options.hx +3
-0+filter-redirector,id=@var{id},netdev=@var{netdevid},indev=@var{chardevi +d},outdev=@var{chardevid},queue=@var{all|rx|tx}[,vnet_hdr_support][,pos +ition=@var{head|tail|id}][,insert=@var{after|before}] filter-redirector on netdev @var{netdevid},redirect filter's net packet tochardev @var{chardevid},and redirect indev's packet to filter.if it has the
vnet_hdr_supportflag, @@ -4400,7 +4400,7 @@ Create a filter-redirector we need to differ outdev id from indev id, id can not be the same. we can just use indev or outdev, but at least one of indev or outdev need to be specified.-@item -object filter- rewriter,id=@var{id},netdev=@var{netdevid},queue=@var{all|rx|tx},[vnet_hdr_ support]
+@item -objectqemu-options.hx +3
-0+filter-rewriter,id=@var{id},netdev=@var{netdevid},queue=@var{all|rx|tx} +,[vnet_hdr_support][,position=@var{head|tail|id}][,insert=@var{after|be +fore}] Filter-rewriter is a part of COLO project.It will rewrite tcp packet to secondaryfrom primary to keep secondary tcp connection,and rewrite @@ -4413,7 +4413,7 @@ colo secondary:
-object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1 -object filter-rewriter,id=rew0,netdev=hn0,queue=all-@item -object filter- dump,id=@var{id},netdev=@var{dev}[,file=@var{filename}][,maxlen=@var{len}] +@item -object +filter-dump,id=@var{id},netdev=@var{dev}[,file=@var{filename}][,maxlen= +@var{len}][,position=@var{head|tail|id}][,insert=@var{after|before}]
Dump the network traffic on netdev @var{dev} to the file specified by
@var{filename}. At most @var{len} bytes (64k by default) per packet are stored. --
2.20.1
Re: [Qemu-devel] [PATCH v2 2/3] net/filter.c: Add Options to insert filters anywhere in the filter list
Quoted 26 lines · Chen
Quoted 13 lines
-----Original Message-----
From: Lukas Straub [mailto:[email protected]]
Sent: Friday, August 16, 2019 2:49 AM
To: qemu-devel <[email protected]>
Cc: Zhang, Chen <[email protected]>; Jason Wang <[email protected]>; Wen Congyang <[email protected]>; Xie Changlong <[email protected]>
Subject: [PATCH v2 2/3]net/filter.c: Add Options to insert filters anywhere in the filter listTo switch the Secondary to Primary, we need to insert new filters before the filter-rewriter.
Quoted 7 lines
Add the options insert= and position= to be able to insert filters anywhere in the filter list.
position should be either "head", "tail" or the id of another filter. insert should be either "before" or "after" to specify where to insert the new filter relative to the one specified with position.
Hi Lukas,
It looks no need to add the "insert = xxx" for this operation. For example:
Quoted 6 lines
We have 3 net-filters, the running order like that:
Fiter1 ----------> Filter2 ------------> Filter3
If we want to add another filter between filter1 and filter2.
The "Position = head, insert = after" always seam with "position = filter2 id, insert = before".
Hi Zhang,
The insert= parameter is ignored if position=head or tail. It always Inserts at the head (before Filter1) or the tail (after Filter3) of the List in these cases.
Quoted 2 lines
It seems the "insert" is a redundant args.
So I think it is enough with the "position", we can make the "insert" always equal "after" except the "head".
Yes, we still could do it without it, but its more convenient with the insert= parameter. For example our Case with inserting before the rewriter:
'filter-mirror', 'id': 'm0', 'props': { 'insert': 'before', 'position': 'rew0', 'netdev': 'hn0', 'queue': 'tx', 'outdev': 'mirror0' } 'filter-redirector', 'id': 'redire0', 'props': { 'insert': 'before', 'position': 'rew0', 'netdev': 'hn0', 'queue': 'rx', 'indev': 'compare_out' } 'filter-redirector', 'id': 'redire1', 'props': { 'insert': 'before', 'position': 'rew0', 'netdev': 'hn0', 'queue': 'rx', 'outdev': 'compare0' }
You see directly that here 3 Filters are inserted before the rewriter.
would have to become:
'filter-mirror', 'id': 'm0', 'props': { 'position': 'head', 'netdev': 'hn0', 'queue': 'tx', 'outdev': 'mirror0' } 'filter-redirector', 'id': 'redire0', 'props': { 'position': 'm0', 'netdev': 'hn0', 'queue': 'rx', 'indev': 'compare_out' } 'filter-redirector', 'id': 'redire1', 'props': { 'position': 'redire0', 'netdev': 'hn0', 'queue': 'rx', 'outdev': 'compare0' }
Which is less obvious.
Regards,
Lukas Straub
Quoted 215 lines
Thanks
Zhang ChenQuoted 210 lines
Signed-off-by Lukas Straub <[email protected]>--- include/net/filter.h | 2 ++ net/filter.c | 71 +++++++++++++++++++++++++++++++++++++++++++- qemu-options.hx | 10 +++---- 3 files changed, 77 insertions(+), 6 deletions(-)include/net/filter.h index renamed from include/net/filter.h +0
-0
49da666ac0..355c178f75100644include/net/filter.h +2
-0@@ -62,6 +62,8 @@ struct NetFilterState {NetClientState *netdev;NetFilterDirection direction;bool on; +char *position; +bool insert_before;QTAILQ_ENTRY (NetFilterState) next; };net/filter.c +55
-0@@ -171,11 +171,47 @@ static void netfilter_set_status(Object *obj, const char *str, Error **errp) } } +static char *netfilter_get_position (Object *obj,Error **errp) { +NetFilterState *nf =NETFILTER (obj); + +return g_strdup (nf->position); +} + +static void netfilter_set_position (Object *obj,const char *str,Error +**errp) { +NetFilterState *nf =NETFILTER (obj); + + nf->position =g_strdup (str); +} + +static char *netfilter_get_insert (Object *obj,Error **errp) { +NetFilterState *nf =NETFILTER (obj); + +return nf->insert_before ?g_strdup ("before" ) :g_strdup ("after" ); +} + +static void netfilter_set_insert (Object *obj,const char *str,Error +**errp) { +NetFilterState *nf =NETFILTER (obj); + +if (strcmp (str,"before" ) &&strcmp (str,"after" )) { +error_setg (errp,"Invalid value for netfilter insert, " +"should be 'head' or 'tail'" ); +return ; + } + + nf->insert_before = !strcmp (str,"before" ); } +static void netfilter_init (Object *obj) {NetFilterState *nf =NETFILTER (obj); nf->on = true; + nf->insert_before = false; + nf->position =g_strdup ("tail" );object_property_add_str (obj,"netdev" , netfilter_get_netdev_id, netfilter_set_netdev_id, @@ -187,11 +223,18 @@ static void netfilter_init(Object *obj) object_property_add_str(obj, "status", netfilter_get_status, netfilter_set_status, NULL); + object_property_add_str(obj, "position", + netfilter_get_position, netfilter_set_position, + NULL); +object_property_add_str (obj,"insert" , + netfilter_get_insert, netfilter_set_insert, + NULL); }static void netfilter_complete (UserCreatable *uc,Error **errp) {NetFilterState *nf =NETFILTER (uc); +NetFilterState *position =NULL ;NetClientState *ncs[MAX_QUEUE_NUM ];NetFilterClass *nfc =NETFILTER_GET_CLASS (uc);int queues;@@ -219,6 +262,20 @@ static void netfilter_complete(UserCreatable *uc, Error **errp) return; } +if (strcmp (nf->position,"head" ) &&strcmp (nf->position,"tail" )) { +/* Search for the position to insert before/after */ +Object *container; +Object *obj; + + container =object_get_objects_root (); + obj =object_resolve_path_component (container, nf->position); +if (!obj) { +error_setg (errp,"filter '%s' not found" , nf->position); +return ; + } + position =NETFILTER (obj); + } + nf->netdev = ncs[0 ];if (nfc->setup) {net/filter.c +12
-1@@ -228,7 +285,18 @@ static void netfilter_complete(UserCreatable *uc, Error **errp) return; } } -QTAILQ_INSERT_TAIL (&nf->netdev->filters, nf, next); + +if (position) { +if (nf->insert_before) { +QTAILQ_INSERT_BEFORE (position, nf, next); + }else { +QTAILQ_INSERT_AFTER (&nf->netdev->filters, position, nf, next); + } + }else if (!strcmp (nf->position,"head" )) { +QTAILQ_INSERT_HEAD (&nf->netdev->filters, nf, next); + }else if (!strcmp (nf->position,"tail" )) { +QTAILQ_INSERT_TAIL (&nf->netdev->filters, nf, next); + } }static void
netfilter_finalize(Object *obj)@@ -245,6 +313,7 @@ static voidnetfilter_finalize(Object *obj)QTAILQ_REMOVE(&nf->netdev->filters, nf, next); } g_free(nf->netdev_id);net/filter.c +1
-0+g_free (nf->position); }static void default_handle_event (NetFilterState *nf,int event,Error **errp)qemu-options.hx index 08749a3391..f0a47a0746 renamed from qemu-options.hx +0
-0100644
qemu-options.hx +0
-0@@ -4368,7 +4368,7 @@ applications, they can do this through this parameter.Its format is a gnutls priority string as described at @url{https://gnutls.org/manual/html_node/Priority-Strings.html}.
-@item -object filter- buffer,id=@var{id},netdev=@var{netdevid},interval=@var{t}[,queue=@var{all|r x|tx}][,status=@var{on|off}]
+@item -objectqemu-options.hx +3
-0+filter-buffer,id=@var{id},netdev=@var{netdevid},interval=@var{t}[,queue +=@var{all|rx|tx}][,status=@var{on|off}][,position=@var{head|tail|id}][, +insert=@var{after|before}] Interval @var{t} can't be 0, this filter batches the packet delivery: all packetsarriving in a given interval on netdev @var{netdevid} are delayed @@ -4387,11 +4387,11 @@ queue @var{all|rx|tx} is an option that can be applied to any netfilter.
@option{tx}: the filter is attached to the transmit queue of the netdev,
where it will receive packets sent by the netdev.-@item -object filter- mirror,id=@var{id},netdev=@var{netdevid},outdev=@var{chardevid},queue=@v ar{all|rx|tx}[,vnet_hdr_support]
+@item -objectqemu-options.hx +3
-0+filter-mirror,id=@var{id},netdev=@var{netdevid},outdev=@var{chardevid}, +queue=@var{all|rx|tx}[,vnet_hdr_support][,position=@var{head|tail|id}][ +,insert=@var{after|before}] filter-mirror on netdev @var{netdevid},mirror net packet tochardev@var{chardevid}, if it has the
vnet_hdr_supportflag, filter-mirror will mirror packet withvnet_hdr_len.-@item -object filter- redirector,id=@var{id},netdev=@var{netdevid},indev=@var{chardevid},outdev= @var{chardevid},queue=@var{all|rx|tx}[,vnet_hdr_support] +@item -object
qemu-options.hx +3
-0+filter-redirector,id=@var{id},netdev=@var{netdevid},indev=@var{chardevi +d},outdev=@var{chardevid},queue=@var{all|rx|tx}[,vnet_hdr_support][,pos +ition=@var{head|tail|id}][,insert=@var{after|before}] filter-redirector on netdev @var{netdevid},redirect filter's net packet tochardev @var{chardevid},and redirect indev's packet to filter.if it has the
vnet_hdr_supportflag, @@ -4400,7 +4400,7 @@ Create a filter-redirector we need to differ outdev id from indev id, id can not be the same. we can just use indev or outdev, but at least one of indev or outdev need to be specified.-@item -object filter- rewriter,id=@var{id},netdev=@var{netdevid},queue=@var{all|rx|tx},[vnet_hdr_ support]
+@item -objectqemu-options.hx +3
-0+filter-rewriter,id=@var{id},netdev=@var{netdevid},queue=@var{all|rx|tx} +,[vnet_hdr_support][,position=@var{head|tail|id}][,insert=@var{after|be +fore}] Filter-rewriter is a part of COLO project.It will rewrite tcp packet to secondaryfrom primary to keep secondary tcp connection,and rewrite @@ -4413,7 +4413,7 @@ colo secondary:
-object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1 -object filter-rewriter,id=rew0,netdev=hn0,queue=all-@item -object filter- dump,id=@var{id},netdev=@var{dev}[,file=@var{filename}][,maxlen=@var{len}] +@item -object +filter-dump,id=@var{id},netdev=@var{dev}[,file=@var{filename}][,maxlen= +@var{len}][,position=@var{head|tail|id}][,insert=@var{after|before}]
Dump the network traffic on netdev @var{dev} to the file specified by
@var{filename}. At most @var{len} bytes (64k by default) per packet are stored. --
2.20.1
Re: [Qemu-devel] [PATCH v2 2/3] net/filter.c: Add Options to insert filters anywhere in the filter list
Quoted 70 lines
-----Original Message-----
From: Lukas Straub <[email protected]>
Sent: Friday, August 23, 2019 2:21 PM
To: Zhang, Chen <[email protected]>
Cc: qemu-devel <[email protected]>; Jason Wang <[email protected]>; Wen Congyang <[email protected]>; Xie Changlong <[email protected]>
Subject: Re: [PATCH v2 2/3]net/filter.c: Add Options to insert filters anywhere in the filter listQuoted 6 lines · Chen
Quoted 6 lines
-----Original Message-----
From: Lukas Straub [mailto:[email protected]]
Sent: Friday, August 16, 2019 2:49 AM
To: qemu-devel <[email protected]>
Cc: Zhang, Chen <[email protected]>; Jason Wang <[email protected]>; Wen Congyang<[email protected]>; Xie
Quoted 20 lines
Quoted 7 lines
Changlong <[email protected]>
Subject: [PATCH v2 2/3]net/filter.c: Add Options to insert filters anywhere in the filter listTo switch the Secondary to Primary, we need to insert new filters before the filter-rewriter.
Quoted 7 lines
Add the options insert= and position= to be able to insert filters anywhere in the filter list.
position should be either "head", "tail" or the id of another filter. insert should be either "before" or "after" to specify where to insert the new filter relative to the one specified with position.
Hi Lukas,
It looks no need to add the "insert = xxx" for this operation. For example:
Quoted 6 lines
We have 3 net-filters, the running order like that:
Fiter1 ----------> Filter2 ------------> Filter3
If we want to add another filter between filter1 and filter2.
The "Position = head, insert = after" always seam with "position = filter2 id,insert = before".
Hi Zhang,
The insert= parameter is ignored if position=head or tail. It always Inserts at the head (before Filter1) or the tail (after Filter3) of the List in these cases.Quoted 2 lines
It seems the "insert" is a redundant args.
So I think it is enough with the "position", we can make the "insert" alwaysequal "after" except the "head".
Yes, we still could do it without it, but its more convenient with the insert= parameter. For example our Case with inserting before the rewriter:
'filter-mirror', 'id': 'm0', 'props': { 'insert': 'before', 'position': 'rew0', 'netdev':
'hn0', 'queue': 'tx', 'outdev': 'mirror0' } 'filter-redirector', 'id': 'redire0', 'props':
{ 'insert': 'before', 'position': 'rew0', 'netdev': 'hn0', 'queue': 'rx', 'indev':
'compare_out' } 'filter-redirector', 'id': 'redire1', 'props': { 'insert': 'before', 'position': 'rew0', 'netdev': 'hn0', 'queue': 'rx', 'outdev': 'compare0' }You see directly that here 3 Filters are inserted before the rewriter.
would have to become:
Quoted 7 lines
'filter-mirror', 'id': 'm0', 'props': { 'position': 'head', 'netdev': 'hn0', 'queue': 'tx', 'outdev': 'mirror0' } 'filter-redirector', 'id': 'redire0', 'props': { 'position': 'm0', 'netdev': 'hn0', 'queue': 'rx', 'indev': '
compare_out' } 'filter-redirector', 'id':
'redire1', 'props': { 'position': 'redire0', 'netdev': 'hn0', 'queue': 'rx', 'outdev':
'compare0' }Which is less obvious.
OK, It is fine for me.
But in the code have some other issues like that:
+
+static void netfilter_set_insert(Object *obj, const char *str, Error **errp) +{
+ NetFilterState *nf = NETFILTER(obj);
+
+ if (strcmp(str, "before") && strcmp(str, "after")) {
+ error_setg(errp, "Invalid value for netfilter insert, "
+ "should be 'head' or 'tail'"); -------------------------------->>> I think you should change the "head/tail" to "before/after".
+ return;
+ }
+
+ nf->insert_before = !strcmp(str, "before");
+}
And I think the "front/behind" is better than "before/after" in this status. At the same time the name of the "insert_before" change to "front_flag" is better.
Thanks
Zhang Chen
Quoted 15 lines
Regards,
Lukas StraubQuoted 8 lines
Thanks
Zhang ChenQuoted 4 lines
Signed-off-by Lukas Straub <[email protected]>--- include/net/filter.h | 2 ++ net/filter.c | 71+++++++++++++++++++++++++++++++++++++++++++-
Quoted 2 lines
Quoted 2 lines
qemu-options.hx | 10 +++---- 3 files changed, 77 insertions(+), 6 deletions(-)
Re: [Qemu-devel] [PATCH v2 2/3] net/filter.c: Add Options to insert filters anywhere in the filter list
Quoted 80 lines · Chen
Quoted 69 lines
-----Original Message-----
From: Lukas Straub <[email protected]>
Sent: Friday, August 23, 2019 2:21 PM
To: Zhang, Chen <[email protected]>
Cc: qemu-devel <[email protected]>; Jason Wang <[email protected]>; Wen Congyang <[email protected]>; Xie Changlong <[email protected]>
Subject: Re: [PATCH v2 2/3]net/filter.c: Add Options to insert filters anywhere in the filter listQuoted 6 lines · Chen
Quoted 6 lines
-----Original Message-----
From: Lukas Straub [mailto:[email protected]]
Sent: Friday, August 16, 2019 2:49 AM
To: qemu-devel <[email protected]>
Cc: Zhang, Chen <[email protected]>; Jason Wang <[email protected]>; Wen Congyang<[email protected]>; Xie
Quoted 20 lines
Quoted 7 lines
Changlong <[email protected]>
Subject: [PATCH v2 2/3]net/filter.c: Add Options to insert filters anywhere in the filter listTo switch the Secondary to Primary, we need to insert new filters before the filter-rewriter.
Quoted 7 lines
Add the options insert= and position= to be able to insert filters anywhere in the filter list.
position should be either "head", "tail" or the id of another filter. insert should be either "before" or "after" to specify where to insert the new filter relative to the one specified with position.
Hi Lukas,
It looks no need to add the "insert = xxx" for this operation. For example:
Quoted 6 lines
We have 3 net-filters, the running order like that:
Fiter1 ----------> Filter2 ------------> Filter3
If we want to add another filter between filter1 and filter2.
The "Position = head, insert = after" always seam with "position = filter2 id,insert = before".
Hi Zhang,
The insert= parameter is ignored if position=head or tail. It always Inserts at the head (before Filter1) or the tail (after Filter3) of the List in these cases.Quoted 2 lines
It seems the "insert" is a redundant args.
So I think it is enough with the "position", we can make the "insert" alwaysequal "after" except the "head".
Yes, we still could do it without it, but its more convenient with the insert= parameter. For example our Case with inserting before the rewriter:
'filter-mirror', 'id': 'm0', 'props': { 'insert': 'before', 'position': 'rew0', 'netdev':
'hn0', 'queue': 'tx', 'outdev': 'mirror0' } 'filter-redirector', 'id': 'redire0', 'props':
{ 'insert': 'before', 'position': 'rew0', 'netdev': 'hn0', 'queue': 'rx', 'indev':
'compare_out' } 'filter-redirector', 'id': 'redire1', 'props': { 'insert': 'before', 'position': 'rew0', 'netdev': 'hn0', 'queue': 'rx', 'outdev': 'compare0' }You see directly that here 3 Filters are inserted before the rewriter.
would have to become:
Quoted 7 lines
'filter-mirror', 'id': 'm0', 'props': { 'position': 'head', 'netdev': 'hn0', 'queue': 'tx', 'outdev': 'mirror0' } 'filter-redirector', 'id': 'redire0', 'props': { 'position': 'm0', 'netdev': 'hn0', 'queue': 'rx', 'indev': '
compare_out' } 'filter-redirector', 'id':
'redire1', 'props': { 'position': 'redire0', 'netdev': 'hn0', 'queue': 'rx', 'outdev':
'compare0' }Which is less obvious.
OK, It is fine for me.
But in the code have some other issues like that:
net/filter.c static void netfilter_set_status(Object *obj, const char *str, Error **errp)
Quoted 8 lines
net/filter.c +8
-0+ +static void netfilter_set_insert (Object *obj,const char *str,Error **errp) +{ +NetFilterState *nf =NETFILTER (obj); + +if (strcmp (str,"before" ) &&strcmp (str,"after" )) { +error_setg (errp,"Invalid value for netfilter insert, " + "should be 'head' or 'tail'"); -------------------------------->>> I think you should change the "head/tail" to "before/after".
Oops, that was a typo.
Quoted 9 lines
net/filter.c +5
-0+return ; + } + + nf->insert_before = !strcmp (str,"before" ); +}And I think the "front/behind" is better than "before/after" in this status. At the same time the name of the "
insert_before" change to "front_flag" is better.
What I like about the "before" is that it sounds more like an English sentence.
insert: before, position: rew0
vs.
insert: front, position: rew0
But I agree, "behind" is more clear than "after".
What do you think about "first/last" instead of "head/tail"?
Regards,
Lukas Straub
Quoted 20 lines
Thanks
Zhang ChenQuoted 15 lines
Regards,
Lukas StraubQuoted 8 lines
Thanks
Zhang ChenQuoted 4 lines
Signed-off-by Lukas Straub <[email protected]>--- include/net/filter.h | 2 ++ net/filter.c | 71+++++++++++++++++++++++++++++++++++++++++++-
Quoted 2 lines
Quoted 2 lines
qemu-options.hx | 10 +++---- 3 files changed, 77 insertions(+), 6 deletions(-)
Re: [Qemu-devel] [PATCH v2 2/3] net/filter.c: Add Options to insert filters anywhere in the filter list
Quoted 128 lines
-----Original Message-----
From: Lukas Straub <[email protected]>
Sent: Tuesday, September 3, 2019 2:51 AM
To: Zhang, Chen <[email protected]>
Cc: qemu-devel <[email protected]>; Jason Wang <[email protected]>; Wen Congyang <[email protected]>; Xie Changlong <[email protected]>
Subject: Re: [PATCH v2 2/3]net/filter.c: Add Options to insert filters anywhere in the filter listQuoted 6 lines · Chen
Quoted 6 lines
-----Original Message-----
From: Lukas Straub <[email protected]>
Sent: Friday, August 23, 2019 2:21 PM
To: Zhang, Chen <[email protected]>
Cc: qemu-devel <[email protected]>; Jason Wang <[email protected]>; Wen Congyang<[email protected]>; Xie
Quoted 38 lines
Quoted 38 lines
Changlong <[email protected]>
Subject: Re: [PATCH v2 2/3]net/filter.c: Add Options to insert filters anywhere in the filter listQuoted 6 lines · Chen
Quoted 6 lines
-----Original Message-----
From: Lukas Straub [mailto:[email protected]]
Sent: Friday, August 16, 2019 2:49 AM
To: qemu-devel <[email protected]>
Cc: Zhang, Chen <[email protected]>; Jason Wang <[email protected]>; Wen Congyang<[email protected]>; Xie
Quoted 24 lines
Quoted 7 lines
Changlong <[email protected]>
Subject: [PATCH v2 2/3]net/filter.c: Add Options to insert filters anywhere in the filter listTo switch the Secondary to Primary, we need to insert new filters before the filter-rewriter.
Quoted 7 lines
Add the options insert= and position= to be able to insert filters anywhere in the filter list.
position should be either "head", "tail" or the id of another filter. insert should be either "before" or "after" to specify where to insert the new filter relative to the one specified with position.
Hi Lukas,
It looks no need to add the "insert = xxx" for this operation. For example:
We have 3 net-filters, the running order like that:
Fiter1 ----------> Filter2 ------------> Filter3
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines
If we want to add another filter between filter1 and filter2. The "Position = head, insert = after" always seam with "position = filter2 id,
insert = before".
Hi Zhang,
The insert= parameter is ignored if position=head or tail. It always Inserts at the head (before Filter1) or the tail (after Filter3) of the List inthese cases.
Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
It seems the "insert" is a redundant args.
So I think it is enough with the "position", we can make the "insert" alwaysequal "after" except the "head".
Yes, we still could do it without it, but its more convenient with the insert= parameter. For example our Case with inserting before the
rewriter:
Quoted 2 lines
Quoted 2 lines
'filter-mirror', 'id': 'm0', 'props': { 'insert': 'before', 'position': 'rew0',
'netdev':
Quoted 1 line
Quoted 1 line
'hn0', 'queue': 'tx', 'outdev': 'mirror0' } 'filter-redirector', 'id': 'redire0',
'props':
Quoted 8 lines
Quoted 8 lines
{ 'insert': 'before', 'position': 'rew0', 'netdev': 'hn0', 'queue': 'rx', 'indev':
'compare_out' } 'filter-redirector', 'id': 'redire1', 'props': { 'insert': 'before',
'position': 'rew0', 'netdev': 'hn0', 'queue': 'rx', 'outdev':
'compare0' }You see directly that here 3 Filters are inserted before the rewriter.
Quoted 8 lines
Quoted 8 lines
would have to become:
'filter-mirror', 'id': 'm0', 'props': { 'position': 'head',
'netdev': 'hn0', 'queue': 'tx',
'outdev': 'mirror0' } 'filter-redirector', 'id': 'redire0', 'props':
{ 'position': 'm0',
'netdev': 'hn0', 'queue': 'rx', 'indev': 'compare_out' } 'filter-redirector', 'id':
'redire1', 'props': { 'position': 'redire0', 'netdev': 'hn0', 'queue': 'rx','outdev':
Quoted 7 lines
Quoted 3 lines
'compare0' }
Which is less obvious.
OK, It is fine for me.
But in the code have some other issues like that:net/filter.c static void netfilter_set_status(Object *obj, const char *str, Error **errp)
Quoted 8 lines
net/filter.c +8
-0+ +static void netfilter_set_insert (Object *obj,const char *str,Error +**errp) { +NetFilterState *nf =NETFILTER (obj); + +if (strcmp (str,"before" ) &&strcmp (str,"after" )) { +error_setg (errp,"Invalid value for netfilter insert, " + "should be 'head' or 'tail'"); -------------------------------->>> I think you should change the "head/tail" to "before/after".
Oops, that was a typo.
Quoted 8 lines
net/filter.c +4
-0+return ; + } + + nf->insert_before = !strcmp (str,"before" ); }And I think the "front/behind" is better than "before/after" in this status. At the same time the name of the "
insert_before" change to "front_flag" isbetter.
Quoted 8 lines
What I like about the "before" is that it sounds more like an English sentence.
insert: before, position: rew0
vs.
insert: front, position: rew0But I agree, "behind" is more clear than "after".
What do you think about "first/last" instead of "head/tail"?
I'm not a English native speaker, but I think head/tail is enough same as the QTAILQ.
Thanks
Zhang Chen
Quoted 24 lines
Regards,
Lukas StraubQuoted 20 lines
Thanks
Zhang ChenQuoted 15 lines
Regards,
Lukas StraubQuoted 8 lines
Thanks
Zhang ChenQuoted 4 lines
Signed-off-by Lukas Straub <[email protected]>--- include/net/filter.h | 2 ++ net/filter.c | 71+++++++++++++++++++++++++++++++++++++++++++-
Quoted 2 lines
Quoted 2 lines
qemu-options.hx | 10 +++---- 3 files changed, 77 insertions(+), 6 deletions(-)
PATCH v2 3/3 Update Documentation
In reply to Lukas StraubDocument the qemu command-line and qmp commands for continious replication
--- docs/COLO-FT.txt | 185 +++++++++++++++++++++++++++++++++++------------ 1 file changed, 138 insertions(+), 47 deletions(-)
docs/COLO-FT.txt +138 -47
@@ -145,35 +145,64 @@ The diagram just shows the main qmp command, you can get the detail in test procedure. == Test procedure == +Note: Here we are running both instances on the same Machine for testing, +change the IP Addresses if you want to run it on two Hosts + 1. Startup qemu Primary: -# qemu-system-x86_64 -accel kvm -m 2048 -smp 2 -qmp stdio -name primary \ - -device piix3-usb-uhci -vnc :7 \ - -device usb-tablet -netdev tap,id=hn0,vhost=off \ - -device virtio-net-pci,id=net-pci0,netdev=hn0 \ - -drive if=virtio,id=primary-disk0,driver=quorum,read-pattern=fifo,vote-threshold=1,\ - children.0.file.filename=1.raw,\ - children.0.driver=raw -S +# imagefolder="/mnt/vms/colo-test" + +# cp --reflink=auto $imagefolder/primary.qcow2 $imagefolder/primary-copy.qcow2 + +# qemu-system-x86_64 -enable-kvm -cpu qemu64,+kvmclock -m 512 -smp 1 -qmp stdio \ + -vnc :0 -k de -device piix3-usb-uhci -device usb-tablet -name primary \ + -netdev tap,id=hn0,vhost=off,helper=/usr/lib/qemu/qemu-bridge-helper \ + -device rtl8139,id=e0,netdev=hn0 \ + -chardev socket,id=mirror0,host=127.0.0.1,port=9003,server,nowait \ + -chardev socket,id=compare1,host=127.0.0.1,port=9004,server,wait \ + -chardev socket,id=compare0,host=127.0.0.1,port=9001,server,nowait \ + -chardev socket,id=compare0-0,host=127.0.0.1,port=9001 \ + -chardev socket,id=compare_out,host=127.0.0.1,port=9005,server,nowait \ + -chardev socket,id=compare_out0,host=127.0.0.1,port=9005 \ + -object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0 \ + -object filter-redirector,netdev=hn0,id=redire0,queue=rx,indev=compare_out \ + -object filter-redirector,netdev=hn0,id=redire1,queue=rx,outdev=compare0 \ + -object iothread,id=iothread1 \ + -object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,\ +outdev=compare_out0,iothread=iothread1 \ + -drive if=ide,id=colo-disk0,driver=quorum,read-pattern=fifo,vote-threshold=1,\ +children.0.file.filename=$imagefolder/primary.qcow2,children.0.driver=qcow2 -S + Secondary: -# qemu-system-x86_64 -accel kvm -m 2048 -smp 2 -qmp stdio -name secondary \ - -device piix3-usb-uhci -vnc :7 \ - -device usb-tablet -netdev tap,id=hn0,vhost=off \ - -device virtio-net-pci,id=net-pci0,netdev=hn0 \ - -drive if=none,id=secondary-disk0,file.filename=1.raw,driver=raw,node-name=node0 \ - -drive if=virtio,id=active-disk0,driver=replication,mode=secondary,\ - file.driver=qcow2,top-id=active-disk0,\ - file.file.filename=/mnt/ramfs/active_disk.img,\ - file.backing.driver=qcow2,\ - file.backing.file.filename=/mnt/ramfs/hidden_disk.img,\ - file.backing.backing=secondary-disk0 \ - -incoming tcp:0:8888 +# imagefolder="/mnt/vms/colo-test" + +# qemu-img create -f qcow2 $imagefolder/secondary-active.qcow2 10G + +# qemu-img create -f qcow2 $imagefolder/secondary-hidden.qcow2 10G + +# qemu-system-x86_64 -enable-kvm -cpu qemu64,+kvmclock -m 512 -smp 1 -qmp stdio \ + -vnc :1 -k de -device piix3-usb-uhci -device usb-tablet -name secondary \ + -netdev tap,id=hn0,vhost=off,helper=/usr/lib/qemu/qemu-bridge-helper \ + -device rtl8139,id=e0,netdev=hn0 \ + -chardev socket,id=red0,host=127.0.0.1,port=9003,reconnect=1 \ + -chardev socket,id=red1,host=127.0.0.1,port=9004,reconnect=1 \ + -object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0 \ + -object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1 \ + -object filter-rewriter,id=rew0,netdev=hn0,queue=all \ + -drive if=none,id=parent0,file.filename=$imagefolder/primary-copy.qcow2,driver=qcow2 \ + -drive if=none,id=childs0,driver=replication,mode=secondary,file.driver=qcow2,\ +top-id=childs0,file.file.filename=$imagefolder/secondary-active.qcow2,\ +file.backing.driver=qcow2,file.backing.file.filename=$imagefolder/secondary-hidden.qcow2,\ +file.backing.backing=parent0 \ + -drive if=ide,id=colo-disk0,driver=quorum,read-pattern=fifo,vote-threshold=1,\ +children.0.file=childs0,children.0.driver=raw \ + -incoming tcp:0:9998 + 2. On Secondary VM's QEMU monitor, issue command {'execute':'qmp_capabilities'} -{ 'execute': 'nbd-server-start', - 'arguments': {'addr': {'type': 'inet', 'data': {'host': 'xx.xx.xx.xx', 'port': '8889'} } } -} -{'execute': 'nbd-server-add', 'arguments': {'device': 'secondary-disk0', 'writable': true } } +{'execute': 'nbd-server-start', 'arguments': {'addr': {'type': 'inet', 'data': {'host': '127.0.0.1', 'port': '9999'} } } } +{'execute': 'nbd-server-add', 'arguments': {'device': 'parent0', 'writable': true } } Note: a. The qmp command nbd-server-start and nbd-server-add must be run
@@ -184,12 +213,10 @@ Note: 3. On Primary VM's QEMU monitor, issue command: {'execute':'qmp_capabilities'} -{ 'execute': 'human-monitor-command', - 'arguments': {'command-line': 'drive_add -n buddy driver=replication,mode=primary,file.driver=nbd,file.host=xx.xx.xx.xx,file.port=8889,file.export=secondary-disk0,node-name=nbd_client0'}} -{ 'execute':'x-blockdev-change', 'arguments':{'parent': 'primary-disk0', 'node': 'nbd_client0' } } -{ 'execute': 'migrate-set-capabilities', - 'arguments': {'capabilities': [ {'capability': 'x-colo', 'state': true } ] } } -{ 'execute': 'migrate', 'arguments': {'uri': 'tcp:xx.xx.xx.xx:8888' } } +{'execute': 'human-monitor-command', 'arguments': {'command-line': 'drive_add -n buddy driver=replication,mode=primary,file.driver=nbd,file.host=127.0.0.1,file.port=9999,file.export=parent0,node-name=replication0'}} +{'execute': 'x-blockdev-change', 'arguments':{'parent': 'colo-disk0', 'node': 'replication0' } } +{'execute': 'migrate-set-capabilities', 'arguments': {'capabilities': [ {'capability': 'x-colo', 'state': true } ] } } +{'execute': 'migrate', 'arguments': {'uri': 'tcp:127.0.0.1:9998' } } Note: a. There should be only one NBD Client for each primary disk.
@@ -199,27 +226,91 @@ Note: 4. After the above steps, you will see, whenever you make changes to PVM, SVM will be synced. You can issue command '{ "execute": "migrate-set-parameters" , "arguments":{ "x-checkpoint-delay": 2000 } }' -to change the checkpoint period time +to change the idle checkpoint period time 5. Failover test -You can kill Primary VM and run 'x_colo_lost_heartbeat' in Secondary VM's -monitor at the same time, then SVM will failover and client will not detect this -change. +You can kill one of the VMs and Failover on the surviving VM: -Before issuing '{ "execute": "x-colo-lost-heartbeat" }' command, we have to -issue block related command to stop block replication. -Primary: - Remove the nbd child from the quorum: - { 'execute': 'x-blockdev-change', 'arguments': {'parent': 'colo-disk0', 'child': 'children.1'}} - { 'execute': 'human-monitor-command','arguments': {'command-line': 'drive_del blk-buddy0'}} - Note: there is no qmp command to remove the blockdev now +== Primary Failover == +The Secondary died, resume on the Primary -Secondary: - The primary host is down, so we should do the following thing: - { 'execute': 'nbd-server-stop' } +{'execute': 'x-blockdev-change', 'arguments':{ 'parent': 'colo-disk0', 'child': 'children.1'} } +{'execute': 'human-monitor-command', 'arguments':{ 'command-line': 'drive_del replication0' } } +{'execute': 'object-del', 'arguments':{ 'id': 'comp0' } } +{'execute': 'object-del', 'arguments':{ 'id': 'iothread1' } } +{'execute': 'object-del', 'arguments':{ 'id': 'm0' } } +{'execute': 'object-del', 'arguments':{ 'id': 'redire0' } } +{'execute': 'object-del', 'arguments':{ 'id': 'redire1' } } +{'execute': 'x-colo-lost-heartbeat' } + +== Secondary Failover == +The Primary died, resume on the Secondary and prepare to become the new Primary + +{'execute': 'nbd-server-stop'} +{'execute': 'x-colo-lost-heartbeat'} + +{'execute': 'object-del', 'arguments':{ 'id': 'f2' } } +{'execute': 'object-del', 'arguments':{ 'id': 'f1' } } +{'execute': 'chardev-remove', 'arguments':{ 'id': 'red1' } } +{'execute': 'chardev-remove', 'arguments':{ 'id': 'red0' } } + +{'execute': 'chardev-add', 'arguments':{ 'id': 'mirror0', 'backend': {'type': 'socket', 'data': {'addr': { 'type': 'inet', 'data': { 'host': '127.0.0.1', 'port': '9003' } }, 'server': true } } } } +{'execute': 'chardev-add', 'arguments':{ 'id': 'compare1', 'backend': {'type': 'socket', 'data': {'addr': { 'type': 'inet', 'data': { 'host': '127.0.0.1', 'port': '9004' } }, 'server': true } } } } +{'execute': 'chardev-add', 'arguments':{ 'id': 'compare0', 'backend': {'type': 'socket', 'data': {'addr': { 'type': 'inet', 'data': { 'host': '127.0.0.1', 'port': '9001' } }, 'server': true } } } } +{'execute': 'chardev-add', 'arguments':{ 'id': 'compare0-0', 'backend': {'type': 'socket', 'data': {'addr': { 'type': 'inet', 'data': { 'host': '127.0.0.1', 'port': '9001' } }, 'server': false } } } } +{'execute': 'chardev-add', 'arguments':{ 'id': 'compare_out', 'backend': {'type': 'socket', 'data': {'addr': { 'type': 'inet', 'data': { 'host': '127.0.0.1', 'port': '9005' } }, 'server': true } } } } +{'execute': 'chardev-add', 'arguments':{ 'id': 'compare_out0', 'backend': {'type': 'socket', 'data': {'addr': { 'type': 'inet', 'data': { 'host': '127.0.0.1', 'port': '9005' } }, 'server': false } } } } + +== Primary resume replication == +Resume replication after new Secondary is up. + +Start the new Secondary, then: +{'execute': 'drive-mirror', 'arguments':{ 'device': 'colo-disk0', 'job-id': 'resync', 'target': 'nbd://127.0.0.1:9999/parent0', 'mode': 'existing', 'format': 'raw', 'sync': 'full'} } + +Wait until disk is synced, then: +{'execute': 'stop'} +{'execute': 'block-job-cancel', 'arguments':{ 'device': 'resync'} } + +{'execute': 'human-monitor-command', 'arguments':{ 'command-line': 'drive_add -n buddy driver=replication,mode=primary,file.driver=nbd,file.host=127.0.0.1,file.port=9999,file.export=parent0,node-name=replication0'}} +{'execute': 'x-blockdev-change', 'arguments':{ 'parent': 'colo-disk0', 'node': 'replication0' } } + +{'execute': 'object-add', 'arguments':{ 'qom-type': 'filter-mirror', 'id': 'm0', 'props': { 'netdev': 'hn0', 'queue': 'tx', 'outdev': 'mirror0' } } } +{'execute': 'object-add', 'arguments':{ 'qom-type': 'filter-redirector', 'id': 'redire0', 'props': { 'netdev': 'hn0', 'queue': 'rx', 'indev': 'compare_out' } } } +{'execute': 'object-add', 'arguments':{ 'qom-type': 'filter-redirector', 'id': 'redire1', 'props': { 'netdev': 'hn0', 'queue': 'rx', 'outdev': 'compare0' } } } +{'execute': 'object-add', 'arguments':{ 'qom-type': 'iothread', 'id': 'iothread1' } } +{'execute': 'object-add', 'arguments':{ 'qom-type': 'colo-compare', 'id': 'comp0', 'props': { 'primary_in': 'compare0-0', 'secondary_in': 'compare1', 'outdev': 'compare_out0', 'iothread': 'iothread1' } } } + +{'execute': 'migrate-set-capabilities', 'arguments':{ 'capabilities': [ {'capability': 'x-colo', 'state': true } ] } } +{'execute': 'migrate', 'arguments':{ 'uri': 'tcp:127.0.0.1:9998' } } + +Note: +If this Primary previously was a Secondary, then we need to insert the +filters before the filter-rewriter by using the +"'insert': 'before', 'position': 'rew0'" Options. See below. + +== Secondary resume replication == +Become Primary and resume replication after new Secondary is up. + +Start the new Secondary, then: +{'execute': 'drive-mirror', 'arguments':{ 'device': 'colo-disk0', 'job-id': 'resync', 'target': 'nbd://127.0.0.1:9999/parent0', 'mode': 'existing', 'format': 'raw', 'sync': 'full'} } + +Wait until disk is synced, then: +{'execute': 'stop'} +{'execute': 'block-job-cancel', 'arguments':{ 'device': 'resync' } } + +{'execute': 'human-monitor-command', 'arguments':{ 'command-line': 'drive_add -n buddy driver=replication,mode=primary,file.driver=nbd,file.host=127.0.0.1,file.port=9999,file.export=parent0,node-name=replication0'}} +{'execute': 'x-blockdev-change', 'arguments':{ 'parent': 'colo-disk0', 'node': 'replication0' } } + +{'execute': 'object-add', 'arguments':{ 'qom-type': 'filter-mirror', 'id': 'm0', 'props': { 'insert': 'before', 'position': 'rew0', 'netdev': 'hn0', 'queue': 'tx', 'outdev': 'mirror0' } } } +{'execute': 'object-add', 'arguments':{ 'qom-type': 'filter-redirector', 'id': 'redire0', 'props': { 'insert': 'before', 'position': 'rew0', 'netdev': 'hn0', 'queue': 'rx', 'indev': 'compare_out' } } } +{'execute': 'object-add', 'arguments':{ 'qom-type': 'filter-redirector', 'id': 'redire1', 'props': { 'insert': 'before', 'position': 'rew0', 'netdev': 'hn0', 'queue': 'rx', 'outdev': 'compare0' } } } +{'execute': 'object-add', 'arguments':{ 'qom-type': 'iothread', 'id': 'iothread1' } } +{'execute': 'object-add', 'arguments':{ 'qom-type': 'colo-compare', 'id': 'comp0', 'props': { 'primary_in': 'compare0-0', 'secondary_in': 'compare1', 'outdev': 'compare_out0', 'iothread': 'iothread1' } } } + +{'execute': 'migrate-set-capabilities', 'arguments':{ 'capabilities': [ {'capability': 'x-colo', 'state': true } ] } } +{'execute': 'migrate', 'arguments':{ 'uri': 'tcp:127.0.0.1:9998' } } == TODO == -1. Support continuous VM replication. -2. Support shared storage. -3. Develop the heartbeat part. -4. Reduce checkpoint VM’s downtime while doing checkpoint. +1. Support shared storage. +2. Develop the heartbeat part. +3. Reduce checkpoint VM’s downtime while doing checkpoint.
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v2 3/3] Update Documentation
Subject "Update Documentation" is too vague, because (1) it lacks a subsystem prefix, and (2) it fails to hint at what it is updated for. Suggest something like "colo: Update documentation for FIXME", or maybe "docs/COLO-FT.txt: Update for FIXME", with a suitable replacement for FIXME.
Re: [Qemu-devel] [PATCH v2 3/3] Update Documentation
In reply to Lukas StraubHi Lukas,
Please address Markus's comments change this patch's name in next version. And I wrote some comments behind, please check it.
Firstly, Please remove all the trailing whitespace in this patch.
Quoted 38 lines
-----Original Message-----
From: Lukas Straub <[email protected]>
Sent: Friday, August 16, 2019 2:49 AM
To: qemu-devel <[email protected]>
Cc: Zhang, Chen <[email protected]>; Jason Wang <[email protected]>; Wen Congyang <[email protected]>; Xie Changlong <[email protected]>
Subject: [PATCH v2 3/3] Update DocumentationDocument the qemu command-line and qmp commands for continious replication
Signed-off-by Lukas Straub <[email protected]>--- docs/COLO-FT.txt | 185 +++++++++++++++++++++++++++++++++++-------- ---- 1 file changed, 138 insertions(+), 47 deletions(-)docs/COLO-FT.txt index renamed from docs/COLO-FT.txt +0
-0
ad24680d13..c08bfbd3a8100644docs/COLO-FT.txt +0
-0@@ -145,35 +145,64 @@ The diagram just shows the main qmp command,you can get the detail in test procedure.
== Test procedure ==
docs/COLO-FT.txt +3
-1+Note: Here we are running both instances on the same Machine for +testing, change the IP Addresses if you want to run it on two Hosts + 1. Startup qemu Primary: -# qemu-system-x86_64 -accel kvm -m 2048 -smp 2 -qmp stdio -nameprimary \
docs/COLO-FT.txt +0
-4- -device piix3-usb-uhci -vnc :7 \ - -device usb-tablet -netdev tap,id=hn0,vhost=off \ - -device virtio-net-pci,id=net-pci0,netdev=hn0 \ - -drive if=virtio,id=primary-disk0,driver=quorum,read-pattern=fifo,vote-threshold=1,\
docs/COLO-FT.txt The diagram just shows the main qmp command, you can get the detail
Quoted 6 lines
docs/COLO-FT.txt +4
-2- children.0.file.filename=1.raw,\ - children.0.driver=raw -S +# imagefolder="/mnt/vms/colo-test" + +# cp --reflink=auto $imagefolder/primary.qcow2 +$imagefolder/primary-copy.qcow2
I think you can tell other people here that we need two same disk image before COLO startup. The name "primary and primary-copy" will make reader very confused.
Quoted 4 lines
docs/COLO-FT.txt +2
-0+ +# qemu-system-x86_64 -enable-kvm -cpu qemu64,+kvmclock -m 512 -smp1 -qmp stdio \
+ -vnc :0 -k de -device piix3-usb-uhci -device usb-tablet -name primary \
What's mean of the "-k de" ?
Quoted 18 lines
+ -netdev tap,id=hn0,vhost=off,helper=/usr/lib/qemu/qemu-bridge-helper
\docs/COLO-FT.txt +6
-0+ -device rtl8139,id=e0,netdev=hn0 \ + -chardev socket,id=mirror0,host=127.0.0.1,port=9003,server,nowait \ + -chardev socket,id=compare1,host=127.0.0.1,port=9004,server,wait \ + -chardev socket,id=compare0,host=127.0.0.1,port=9001,server,nowait \ + -chardev socket,id=compare0-0,host=127.0.0.1,port=9001 \ + -chardev socket,id=compare_out,host=127.0.0.1,port=9005,server,nowait\
docs/COLO-FT.txt +3
-0+ -chardev socket,id=compare_out0,host=127.0.0.1,port=9005 \ + -object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0 \ + -object filter-redirector,netdev=hn0,id=redire0,queue=rx,indev=compare_out \
+ -object filter-
redirector,netdev=hn0,id=redire1,queue=rx,outdev=compare0 \docs/COLO-FT.txt +3
-0+ -object iothread,id=iothread1 \ + -object +colo-compare,id=comp0,primary_in=compare0-
Quoted 2 lines
0,secondary_in=compare1,\
+outdev=compare_out0,iothread=iothread1 \
Please keep the space style.
Quoted 39 lines
docs/COLO-FT.txt +5
-1+ -drive +if=ide,id=colo-disk0,driver=quorum,read-pattern=fifo,vote-threshold=1,\ +children.0.file.filename=$imagefolder/primary.qcow2,children.0.driver=q +cow2 -S + Secondary: -# qemu-system-x86_64 -accel kvm -m 2048 -smp 2 -qmp stdio -namesecondary \
docs/COLO-FT.txt +0
-4- -device piix3-usb-uhci -vnc :7 \ - -device usb-tablet -netdev tap,id=hn0,vhost=off \ - -device virtio-net-pci,id=net-pci0,netdev=hn0 \ - -drive if=none,id=secondary-disk0,file.filename=1.raw,driver=raw,node-name=node0 \
docs/COLO-FT.txt +7
-7- -drive if=virtio,id=active-disk0,driver=replication,mode=secondary,\ - file.driver=qcow2,top-id=active-disk0,\ - file.file.filename=/mnt/ramfs/active_disk.img,\ - file.backing.driver=qcow2,\ - file.backing.file.filename=/mnt/ramfs/hidden_disk.img,\ - file.backing.backing=secondary-disk0 \ - -incoming tcp:0:8888 +# imagefolder="/mnt/vms/colo-test" + +# qemu-img create -f qcow2 $imagefolder/secondary-active.qcow2 10G + +# qemu-img create -f qcow2 $imagefolder/secondary-hidden.qcow2 10G + +# qemu-system-x86_64 -enable-kvm -cpu qemu64,+kvmclock -m 512 -smp1 -qmp stdio \
docs/COLO-FT.txt +2
-0+ -vnc :1 -k de -device piix3-usb-uhci -device usb-tablet -name secondary \ + -netdev tap,id=hn0,vhost=off,helper=/usr/lib/qemu/qemu-bridge-helper\
docs/COLO-FT.txt +7
-0+ -device rtl8139,id=e0,netdev=hn0 \ + -chardev socket,id=red0,host=127.0.0.1,port=9003,reconnect=1 \ + -chardev socket,id=red1,host=127.0.0.1,port=9004,reconnect=1 \ + -object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0 \ + -object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1 \ + -object filter-rewriter,id=rew0,netdev=hn0,queue=all \ + -drive if=none,id=parent0,file.filename=$imagefolder/primary-copy.qcow2,driver=qcow2 \
docs/COLO-FT.txt
Quoted 7 lines
docs/COLO-FT.txt +7
-0+ -drive +if=none,id=childs0,driver=replication,mode=secondary,file.driver=qcow2, +\ +top-id=childs0,file.file.filename=$imagefolder/secondary-active.qcow2,\ +file.backing.driver=qcow2,file.backing.file.filename=$imagefolder/secon +dary-hidden.qcow2,\ +file.backing.backing=parent0 \
Please keep the space style.
docs/COLO-FT.txt The diagram just shows the main qmp command, you can get the detail · line 200
Quoted 5 lines
docs/COLO-FT.txt +5
-0+ -drive +if=ide,id=colo-disk0,driver=quorum,read-pattern=fifo,vote-threshold=1,\ +children.0.file=childs0,children.0.driver=raw \ + -incoming tcp:0:9998 +
Here, you changed the original block design, can you explain the reasons why we need to do this? Please draw a ASCII diagram to describe COLO block detail.
Quoted 110 lines
2. On Secondary VM's QEMU monitor, issue command
{'execute':'qmp_capabilities'} -{ 'execute': 'nbd-server-start',
- 'arguments': {'addr': {'type': 'inet', 'data': {'host': 'xx.xx.xx.xx', 'port':
'8889'} } } -}
-{'execute': 'nbd-server-add', 'arguments': {'device': 'secondary-disk0', 'writable': true } }docs/COLO-FT.txt +4
-2+{'execute': 'nbd-server-start', 'arguments': {'addr': {'type': 'inet', +'data': {'host': '127.0.0.1', 'port': '9999'} } } } +{'execute': 'nbd-server-add', 'arguments': {'device': 'parent0', +'writable': true } } Note: a. The qmp command nbd-server-start and nbd-server-add must be run@@ -184,12 +213,10 @@ Note: 3. On Primary VM's QEMU monitor, issue command: {'execute':'qmp_capabilities'} -{ 'execute': 'human-monitor-command', - 'arguments': {'command-line': 'drive_add -n buddydriver=replication,mode=primary,file.driver=nbd,file.host=xx.xx.xx.xx,file.p ort=8889,file.export=secondary-disk0,node-name=nbd_client0'}}
-{ 'execute':'x-blockdev-change', 'arguments':{'parent': 'primary-disk0', 'node': 'nbd_client0' } } -{ 'execute': 'migrate-set-capabilities',docs/COLO-FT.txt +9
-2- 'arguments': {'capabilities': [ {'capability': 'x-colo', 'state': true } ] } } -{ 'execute': 'migrate', 'arguments': {'uri': 'tcp:xx.xx.xx.xx:8888' } } +{'execute': 'human-monitor-command', 'arguments': {'command-line': +'drive_add -n buddy +driver=replication,mode=primary,file.driver=nbd,file.host=127.0.0.1,fil +e.port=9999,file.export=parent0,node-name=replication0'}} +{'execute': 'x-blockdev-change', 'arguments':{'parent': 'colo-disk0', +'node': 'replication0' } } +{'execute': 'migrate-set-capabilities', 'arguments': {'capabilities': [ +{'capability': 'x-colo', 'state': true } ] } } +{'execute': 'migrate', 'arguments': {'uri': 'tcp:127.0.0.1:9998' } } Note: a. There should be only one NBD Client for each primary disk.@@ -199,27 +226,91 @@ Note: 4. After the above steps, you will see, whenever you make changes to PVM,SVM will be synced.
You can issue command '{ "execute": "migrate-set-parameters" ,
"arguments":{ "x-checkpoint-delay": 2000 } }'docs/COLO-FT.txt +1
-2-to change the checkpoint period time +to change the idle checkpoint period time 5. Failover test -You can kill Primary VM and run 'x_colo_lost_heartbeat' in Secondary VM's -monitor at the same time, then SVM will failover and client will not detect this -change.
docs/COLO-FT.txt +1
-5+You can kill one of the VMs and Failover on the surviving VM: -Before issuing '{ "execute": "x-colo-lost-heartbeat" }' command, we have to -issue block related command to stop block replication. -Primary: - Remove the nbd child from the quorum: - { 'execute': 'x-blockdev-change', 'arguments': {'parent': 'colo-disk0', 'child':'children.1'}}
- { 'execute': 'human-monitor-command','arguments': {'command-line':
'drive_delblk-buddy0'}}docs/COLO-FT.txt +15
-4- Note: there is no qmp command to remove the blockdev now +== Primary Failover == +The Secondary died, resume on the Primary -Secondary: - The primary host is down, so we should do the following thing: - { 'execute': 'nbd-server-stop' } +{'execute': 'x-blockdev-change', 'arguments':{ 'parent': 'colo-disk0', +'child': 'children.1'} } +{'execute': 'human-monitor-command', 'arguments':{ 'command-line': +'drive_del replication0' } } +{'execute': 'object-del', 'arguments':{ 'id': 'comp0' } } +{'execute': 'object-del', 'arguments':{ 'id': 'iothread1' } } +{'execute': 'object-del', 'arguments':{ 'id': 'm0' } } +{'execute': 'object-del', 'arguments':{ 'id': 'redire0' } } +{'execute': 'object-del', 'arguments':{ 'id': 'redire1' } } +{'execute': 'x-colo-lost-heartbeat' } + +== Secondary Failover == +The Primary died, resume on the Secondary and prepare to become thenew
docs/COLO-FT.txt +28
-0+Primary + +{'execute': 'nbd-server-stop'} +{'execute': 'x-colo-lost-heartbeat'} + +{'execute': 'object-del', 'arguments':{ 'id': 'f2' } } +{'execute': 'object-del', 'arguments':{ 'id': 'f1' } } +{'execute': 'chardev-remove', 'arguments':{ 'id': 'red1' } } +{'execute': 'chardev-remove', 'arguments':{ 'id': 'red0' } } + +{'execute': 'chardev-add', 'arguments':{ 'id': 'mirror0', 'backend': +{'type': 'socket', 'data': {'addr': { 'type': 'inet', 'data': { 'host': +'127.0.0.1', 'port': '9003' } }, 'server': true } } } } +{'execute': 'chardev-add', 'arguments':{ 'id': 'compare1', 'backend': +{'type': 'socket', 'data': {'addr': { 'type': 'inet', 'data': { 'host': +'127.0.0.1', 'port': '9004' } }, 'server': true } } } } +{'execute': 'chardev-add', 'arguments':{ 'id': 'compare0', 'backend': +{'type': 'socket', 'data': {'addr': { 'type': 'inet', 'data': { 'host': +'127.0.0.1', 'port': '9001' } }, 'server': true } } } } +{'execute': 'chardev-add', 'arguments':{ 'id': 'compare0-0', 'backend': +{'type': 'socket', 'data': {'addr': { 'type': 'inet', 'data': { 'host': +'127.0.0.1', 'port': '9001' } }, 'server': false } } } } +{'execute': 'chardev-add', 'arguments':{ 'id': 'compare_out', +'backend': {'type': 'socket', 'data': {'addr': { 'type': 'inet', +'data': { 'host': '127.0.0.1', 'port': '9005' } }, 'server': true } } } +} +{'execute': 'chardev-add', 'arguments':{ 'id': 'compare_out0', +'backend': {'type': 'socket', 'data': {'addr': { 'type': 'inet',
docs/COLO-FT.txt
Quoted 10 lines
docs/COLO-FT.txt +10
-0+'data': { 'host': '127.0.0.1', 'port': '9005' } }, 'server': false } } +} } + +== Primary resume replication == +Resume replication after new Secondary is up. + +Start the new Secondary, then: +{'execute': 'drive-mirror', 'arguments':{ 'device': 'colo-disk0', +'job-id': 'resync', 'target': 'nbd://127.0.0.1:9999/parent0', 'mode': +'existing', 'format': 'raw', 'sync': 'full'} }
I think the original secondary node has stopped the nbd server in failover:
docs/COLO-FT.txt Note: · line 250
Quoted 2 lines
docs/COLO-FT.txt +2
-0+{'execute': 'nbd-server-stop'} +{'execute': 'x-colo-lost-heartbeat'}
Why you can connect to it?
And please add new Secondary node start up script here, I think it is different with original secondary node script. same issue in resume secondary.
Quoted 33 lines
docs/COLO-FT.txt +33
-0+ +Wait until disk is synced, then: +{'execute': 'stop'} +{'execute': 'block-job-cancel', 'arguments':{ 'device': 'resync'} } + +{'execute': 'human-monitor-command', 'arguments':{ 'command-line': +'drive_add -n buddy +driver=replication,mode=primary,file.driver=nbd,file.host=127.0.0.1,fil +e.port=9999,file.export=parent0,node-name=replication0'}} +{'execute': 'x-blockdev-change', 'arguments':{ 'parent': 'colo-disk0', +'node': 'replication0' } } + +{'execute': 'object-add', 'arguments':{ 'qom-type': 'filter-mirror', +'id': 'm0', 'props': { 'netdev': 'hn0', 'queue': 'tx', 'outdev': +'mirror0' } } } +{'execute': 'object-add', 'arguments':{ 'qom-type': +'filter-redirector', 'id': 'redire0', 'props': { 'netdev': 'hn0', +'queue': 'rx', 'indev': 'compare_out' } } } +{'execute': 'object-add', 'arguments':{ 'qom-type': +'filter-redirector', 'id': 'redire1', 'props': { 'netdev': 'hn0', +'queue': 'rx', 'outdev': 'compare0' } } } +{'execute': 'object-add', 'arguments':{ 'qom-type': 'iothread', 'id': +'iothread1' } } +{'execute': 'object-add', 'arguments':{ 'qom-type': 'colo-compare', +'id': 'comp0', 'props': { 'primary_in': 'compare0-0', 'secondary_in': +'compare1', 'outdev': 'compare_out0', 'iothread': 'iothread1' } } } + +{'execute': 'migrate-set-capabilities', 'arguments':{ 'capabilities': [ +{'capability': 'x-colo', 'state': true } ] } } +{'execute': 'migrate', 'arguments':{ 'uri': 'tcp:127.0.0.1:9998' } } + +Note: +If this Primary previously was a Secondary, then we need to insert the
docs/COLO-FT.txt
Quoted 10 lines
docs/COLO-FT.txt +10
-0+filters before the filter-rewriter by using the +"'insert': 'before', 'position': 'rew0'" Options. See below. + +== Secondary resume replication == +Become Primary and resume replication after new Secondary is up. + +Start the new Secondary, then: +{'execute': 'drive-mirror', 'arguments':{ 'device': 'colo-disk0', +'job-id': 'resync', 'target': 'nbd://127.0.0.1:9999/parent0', 'mode': +'existing', 'format': 'raw', 'sync': 'full'} }
Same issue as primary resume.
I want to re-tested the resume function but got stuck here.
Thanks
Zhang Chen
Quoted 43 lines
docs/COLO-FT.txt +35
-5+ +Wait until disk is synced, then: +{'execute': 'stop'} +{'execute': 'block-job-cancel', 'arguments':{ 'device': 'resync' } } + +{'execute': 'human-monitor-command', 'arguments':{ 'command-line': +'drive_add -n buddy +driver=replication,mode=primary,file.driver=nbd,file.host=127.0.0.1,fil +e.port=9999,file.export=parent0,node-name=replication0'}} +{'execute': 'x-blockdev-change', 'arguments':{ 'parent': 'colo-disk0', +'node': 'replication0' } } + +{'execute': 'object-add', 'arguments':{ 'qom-type': 'filter-mirror', +'id': 'm0', 'props': { 'insert': 'before', 'position': 'rew0', +'netdev': 'hn0', 'queue': 'tx', 'outdev': 'mirror0' } } } +{'execute': 'object-add', 'arguments':{ 'qom-type': +'filter-redirector', 'id': 'redire0', 'props': { 'insert': 'before', +'position': 'rew0', 'netdev': 'hn0', 'queue': 'rx', 'indev': +'compare_out' } } } +{'execute': 'object-add', 'arguments':{ 'qom-type': +'filter-redirector', 'id': 'redire1', 'props': { 'insert': 'before', +'position': 'rew0', 'netdev': 'hn0', 'queue': 'rx', 'outdev': +'compare0' } } } +{'execute': 'object-add', 'arguments':{ 'qom-type': 'iothread', 'id': +'iothread1' } } +{'execute': 'object-add', 'arguments':{ 'qom-type': 'colo-compare', +'id': 'comp0', 'props': { 'primary_in': 'compare0-0', 'secondary_in': +'compare1', 'outdev': 'compare_out0', 'iothread': 'iothread1' } } } + +{'execute': 'migrate-set-capabilities', 'arguments':{ 'capabilities': [ +{'capability': 'x-colo', 'state': true } ] } } +{'execute': 'migrate', 'arguments':{ 'uri': 'tcp:127.0.0.1:9998' } } == TODO == -1. Support continuous VM replication. -2. Support shared storage. -3. Develop the heartbeat part. -4. Reduce checkpoint VM’s downtime while doing checkpoint. +1. Support shared storage. +2. Develop the heartbeat part. +3. Reduce checkpoint VM’s downtime while doing checkpoint. --2.20.1
Re: [Qemu-devel] [PATCH v2 3/3] Update Documentation
Quoted 55 lines · Chen
Hi Lukas,
Please address Markus's comments change this patch's name in next version. And I wrote some comments behind, please check it.
Firstly, Please remove all the trailing whitespace in this patch.Quoted 38 lines
-----Original Message-----
From: Lukas Straub <[email protected]>
Sent: Friday, August 16, 2019 2:49 AM
To: qemu-devel <[email protected]>
Cc: Zhang, Chen <[email protected]>; Jason Wang <[email protected]>; Wen Congyang <[email protected]>; Xie Changlong <[email protected]>
Subject: [PATCH v2 3/3] Update DocumentationDocument the qemu command-line and qmp commands for continious replication
Signed-off-by Lukas Straub <[email protected]>--- docs/COLO-FT.txt | 185 +++++++++++++++++++++++++++++++++++-------- ---- 1 file changed, 138 insertions(+), 47 deletions(-)docs/COLO-FT.txt index renamed from docs/COLO-FT.txt +0
-0
ad24680d13..c08bfbd3a8100644docs/COLO-FT.txt +0
-0@@ -145,35 +145,64 @@ The diagram just shows the main qmp command,you can get the detail in test procedure.
== Test procedure ==
docs/COLO-FT.txt +3
-1+Note: Here we are running both instances on the same Machine for +testing, change the IP Addresses if you want to run it on two Hosts + 1. Startup qemu Primary: -# qemu-system-x86_64 -accel kvm -m 2048 -smp 2 -qmp stdio -nameprimary \
docs/COLO-FT.txt +0
-4- -device piix3-usb-uhci -vnc :7 \ - -device usb-tablet -netdev tap,id=hn0,vhost=off \ - -device virtio-net-pci,id=net-pci0,netdev=hn0 \ - -drive if=virtio,id=primary-disk0,driver=quorum,read-pattern=fifo,vote-threshold=1,\
docs/COLO-FT.txt The diagram just shows the main qmp command, you can get the detail
Quoted 6 lines
docs/COLO-FT.txt +4
-2- children.0.file.filename=1.raw,\ - children.0.driver=raw -S +# imagefolder="/mnt/vms/colo-test" + +# cp --reflink=auto $imagefolder/primary.qcow2 +$imagefolder/primary-copy.qcow2I think you can tell other people here that we need two same disk image before COLO startup. The name "primary and primary-copy" will make reader very confused.
Quoted 6 lines
Quoted 4 lines
docs/COLO-FT.txt +2
-0+ +# qemu-system-x86_64 -enable-kvm -cpu qemu64,+kvmclock -m 512 -smp1 -qmp stdio \
+ -vnc :0 -k de -device piix3-usb-uhci -device usb-tablet -name primary \What's mean of the "-k de" ?
Hi,
Oops, thats for German Keyboard layout, will remove.
Quoted 63 lines
Quoted 18 lines
+ -netdev tap,id=hn0,vhost=off,helper=/usr/lib/qemu/qemu-bridge-helper
\docs/COLO-FT.txt +6
-0+ -device rtl8139,id=e0,netdev=hn0 \ + -chardev socket,id=mirror0,host=127.0.0.1,port=9003,server,nowait \ + -chardev socket,id=compare1,host=127.0.0.1,port=9004,server,wait \ + -chardev socket,id=compare0,host=127.0.0.1,port=9001,server,nowait \ + -chardev socket,id=compare0-0,host=127.0.0.1,port=9001 \ + -chardev socket,id=compare_out,host=127.0.0.1,port=9005,server,nowait\
docs/COLO-FT.txt +3
-0+ -chardev socket,id=compare_out0,host=127.0.0.1,port=9005 \ + -object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0 \ + -object filter-redirector,netdev=hn0,id=redire0,queue=rx,indev=compare_out \
+ -object filter-
redirector,netdev=hn0,id=redire1,queue=rx,outdev=compare0 \docs/COLO-FT.txt +3
-0+ -object iothread,id=iothread1 \ + -object +colo-compare,id=comp0,primary_in=compare0-Quoted 2 lines
0,secondary_in=compare1,\
+outdev=compare_out0,iothread=iothread1 \Please keep the space style.
Quoted 40 lines
docs/COLO-FT.txt +5
-1+ -drive +if=ide,id=colo-disk0,driver=quorum,read-pattern=fifo,vote-threshold=1,\ +children.0.file.filename=$imagefolder/primary.qcow2,children.0.driver=q +cow2 -S + Secondary: -# qemu-system-x86_64 -accel kvm -m 2048 -smp 2 -qmp stdio -namesecondary \
docs/COLO-FT.txt +0
-4- -device piix3-usb-uhci -vnc :7 \ - -device usb-tablet -netdev tap,id=hn0,vhost=off \ - -device virtio-net-pci,id=net-pci0,netdev=hn0 \ - -drive if=none,id=secondary-disk0,file.filename=1.raw,driver=raw,node-name=node0 \
docs/COLO-FT.txt +7
-7- -drive if=virtio,id=active-disk0,driver=replication,mode=secondary,\ - file.driver=qcow2,top-id=active-disk0,\ - file.file.filename=/mnt/ramfs/active_disk.img,\ - file.backing.driver=qcow2,\ - file.backing.file.filename=/mnt/ramfs/hidden_disk.img,\ - file.backing.backing=secondary-disk0 \ - -incoming tcp:0:8888 +# imagefolder="/mnt/vms/colo-test" + +# qemu-img create -f qcow2 $imagefolder/secondary-active.qcow2 10G + +# qemu-img create -f qcow2 $imagefolder/secondary-hidden.qcow2 10G + +# qemu-system-x86_64 -enable-kvm -cpu qemu64,+kvmclock -m 512 -smp1 -qmp stdio \
docs/COLO-FT.txt +2
-0+ -vnc :1 -k de -device piix3-usb-uhci -device usb-tablet -name secondary \ + -netdev tap,id=hn0,vhost=off,helper=/usr/lib/qemu/qemu-bridge-helper\
docs/COLO-FT.txt +7
-0+ -device rtl8139,id=e0,netdev=hn0 \ + -chardev socket,id=red0,host=127.0.0.1,port=9003,reconnect=1 \ + -chardev socket,id=red1,host=127.0.0.1,port=9004,reconnect=1 \ + -object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0 \ + -object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1 \ + -object filter-rewriter,id=rew0,netdev=hn0,queue=all \ + -drive if=none,id=parent0,file.filename=$imagefolder/primary-copy.qcow2,driver=qcow2 \
+ -drive
Quoted 8 lines
docs/COLO-FT.txt
Quoted 6 lines
docs/COLO-FT.txt +6
-0+if=none,id=childs0,driver=replication,mode=secondary,file.driver=qcow2, +\ +top-id=childs0,file.file.filename=$imagefolder/secondary-active.qcow2,\ +file.backing.driver=qcow2,file.backing.file.filename=$imagefolder/secon +dary-hidden.qcow2,\ +file.backing.backing=parent0 \Please keep the space style.
The Idea here is that this can simply be copy-pasted into a Terminal and it will just work without having to edit it manually.
Quoted 8 lines
docs/COLO-FT.txt The diagram just shows the main qmp command, you can get the detail · line 200
Quoted 5 lines
docs/COLO-FT.txt +5
-0+ -drive +if=ide,id=colo-disk0,driver=quorum,read-pattern=fifo,vote-threshold=1,\ +children.0.file=childs0,children.0.driver=raw \ + -incoming tcp:0:9998 +Here, you changed the original block design, can you explain the reasons why we need to do this? Please draw a ASCII diagram to describe COLO block detail.
will do.
Quoted 122 lines
Quoted 110 lines
2. On Secondary VM's QEMU monitor, issue command
{'execute':'qmp_capabilities'} -{ 'execute': 'nbd-server-start',
- 'arguments': {'addr': {'type': 'inet', 'data': {'host': 'xx.xx.xx.xx', 'port':
'8889'} } } -}
-{'execute': 'nbd-server-add', 'arguments': {'device': 'secondary-disk0', 'writable': true } }docs/COLO-FT.txt +4
-2+{'execute': 'nbd-server-start', 'arguments': {'addr': {'type': 'inet', +'data': {'host': '127.0.0.1', 'port': '9999'} } } } +{'execute': 'nbd-server-add', 'arguments': {'device': 'parent0', +'writable': true } } Note: a. The qmp command nbd-server-start and nbd-server-add must be run@@ -184,12 +213,10 @@ Note: 3. On Primary VM's QEMU monitor, issue command: {'execute':'qmp_capabilities'} -{ 'execute': 'human-monitor-command', - 'arguments': {'command-line': 'drive_add -n buddydriver=replication,mode=primary,file.driver=nbd,file.host=xx.xx.xx.xx,file.p ort=8889,file.export=secondary-disk0,node-name=nbd_client0'}}
-{ 'execute':'x-blockdev-change', 'arguments':{'parent': 'primary-disk0', 'node': 'nbd_client0' } } -{ 'execute': 'migrate-set-capabilities',docs/COLO-FT.txt +9
-2- 'arguments': {'capabilities': [ {'capability': 'x-colo', 'state': true } ] } } -{ 'execute': 'migrate', 'arguments': {'uri': 'tcp:xx.xx.xx.xx:8888' } } +{'execute': 'human-monitor-command', 'arguments': {'command-line': +'drive_add -n buddy +driver=replication,mode=primary,file.driver=nbd,file.host=127.0.0.1,fil +e.port=9999,file.export=parent0,node-name=replication0'}} +{'execute': 'x-blockdev-change', 'arguments':{'parent': 'colo-disk0', +'node': 'replication0' } } +{'execute': 'migrate-set-capabilities', 'arguments': {'capabilities': [ +{'capability': 'x-colo', 'state': true } ] } } +{'execute': 'migrate', 'arguments': {'uri': 'tcp:127.0.0.1:9998' } } Note: a. There should be only one NBD Client for each primary disk.@@ -199,27 +226,91 @@ Note: 4. After the above steps, you will see, whenever you make changes to PVM,SVM will be synced.
You can issue command '{ "execute": "migrate-set-parameters" ,
"arguments":{ "x-checkpoint-delay": 2000 } }'docs/COLO-FT.txt +1
-2-to change the checkpoint period time +to change the idle checkpoint period time 5. Failover test -You can kill Primary VM and run 'x_colo_lost_heartbeat' in Secondary VM's -monitor at the same time, then SVM will failover and client will not detect this -change.
docs/COLO-FT.txt +1
-5+You can kill one of the VMs and Failover on the surviving VM: -Before issuing '{ "execute": "x-colo-lost-heartbeat" }' command, we have to -issue block related command to stop block replication. -Primary: - Remove the nbd child from the quorum: - { 'execute': 'x-blockdev-change', 'arguments': {'parent': 'colo-disk0', 'child':'children.1'}}
- { 'execute': 'human-monitor-command','arguments': {'command-line':
'drive_delblk-buddy0'}}docs/COLO-FT.txt +15
-4- Note: there is no qmp command to remove the blockdev now +== Primary Failover == +The Secondary died, resume on the Primary -Secondary: - The primary host is down, so we should do the following thing: - { 'execute': 'nbd-server-stop' } +{'execute': 'x-blockdev-change', 'arguments':{ 'parent': 'colo-disk0', +'child': 'children.1'} } +{'execute': 'human-monitor-command', 'arguments':{ 'command-line': +'drive_del replication0' } } +{'execute': 'object-del', 'arguments':{ 'id': 'comp0' } } +{'execute': 'object-del', 'arguments':{ 'id': 'iothread1' } } +{'execute': 'object-del', 'arguments':{ 'id': 'm0' } } +{'execute': 'object-del', 'arguments':{ 'id': 'redire0' } } +{'execute': 'object-del', 'arguments':{ 'id': 'redire1' } } +{'execute': 'x-colo-lost-heartbeat' } + +== Secondary Failover == +The Primary died, resume on the Secondary and prepare to become thenew
docs/COLO-FT.txt +28
-0+Primary + +{'execute': 'nbd-server-stop'} +{'execute': 'x-colo-lost-heartbeat'} + +{'execute': 'object-del', 'arguments':{ 'id': 'f2' } } +{'execute': 'object-del', 'arguments':{ 'id': 'f1' } } +{'execute': 'chardev-remove', 'arguments':{ 'id': 'red1' } } +{'execute': 'chardev-remove', 'arguments':{ 'id': 'red0' } } + +{'execute': 'chardev-add', 'arguments':{ 'id': 'mirror0', 'backend': +{'type': 'socket', 'data': {'addr': { 'type': 'inet', 'data': { 'host': +'127.0.0.1', 'port': '9003' } }, 'server': true } } } } +{'execute': 'chardev-add', 'arguments':{ 'id': 'compare1', 'backend': +{'type': 'socket', 'data': {'addr': { 'type': 'inet', 'data': { 'host': +'127.0.0.1', 'port': '9004' } }, 'server': true } } } } +{'execute': 'chardev-add', 'arguments':{ 'id': 'compare0', 'backend': +{'type': 'socket', 'data': {'addr': { 'type': 'inet', 'data': { 'host': +'127.0.0.1', 'port': '9001' } }, 'server': true } } } } +{'execute': 'chardev-add', 'arguments':{ 'id': 'compare0-0', 'backend': +{'type': 'socket', 'data': {'addr': { 'type': 'inet', 'data': { 'host': +'127.0.0.1', 'port': '9001' } }, 'server': false } } } } +{'execute': 'chardev-add', 'arguments':{ 'id': 'compare_out', +'backend': {'type': 'socket', 'data': {'addr': { 'type': 'inet', +'data': { 'host': '127.0.0.1', 'port': '9005' } }, 'server': true } } } +} +{'execute': 'chardev-add', 'arguments':{ 'id': 'compare_out0', +'backend': {'type': 'socket', 'data': {'addr': { 'type': 'inet',docs/COLO-FT.txt
Quoted 10 lines
docs/COLO-FT.txt +10
-0+'data': { 'host': '127.0.0.1', 'port': '9005' } }, 'server': false } } +} } + +== Primary resume replication == +Resume replication after new Secondary is up. + +Start the new Secondary, then: +{'execute': 'drive-mirror', 'arguments':{ 'device': 'colo-disk0', +'job-id': 'resync', 'target': 'nbd://127.0.0.1:9999/parent0', 'mode': +'existing', 'format': 'raw', 'sync': 'full'} }I think the original secondary node has stopped the nbd server in failover:
Quoted 4 lines
docs/COLO-FT.txt Note: · line 250
Quoted 2 lines
docs/COLO-FT.txt +2
-0+{'execute': 'nbd-server-stop'} +{'execute': 'x-colo-lost-heartbeat'}Why you can connect to it?
Oh, I meant it differently. You execute this only if you killed the Secondary.
Thats what I meant with "You can kill one of the VMs and Failover on the surviving VM" above.
If you killed the Secondary, then you start a new Secondary (using the Secondary commandline above, start nbd server and add the disk to the nbd server ) then execute the commands here under "Primary resume replication". After that, if you want to resume the replication, follow "Primary resume replication"
I will try to clarify this.
Quoted 3 lines
And please add new Secondary node start up script here, I think it is different with original secondary node script. same issue in resume secondary.
No, Just the initial Primary cmdline is different. The Secondary cmdline is always the same as above. Except if you run both on the same node, then you need to choose a different Image than primary-copy.qcow2, I will clarify this.
Regards,
Lukas Straub
Quoted 94 lines
Quoted 33 lines
docs/COLO-FT.txt +33
-0+ +Wait until disk is synced, then: +{'execute': 'stop'} +{'execute': 'block-job-cancel', 'arguments':{ 'device': 'resync'} } + +{'execute': 'human-monitor-command', 'arguments':{ 'command-line': +'drive_add -n buddy +driver=replication,mode=primary,file.driver=nbd,file.host=127.0.0.1,fil +e.port=9999,file.export=parent0,node-name=replication0'}} +{'execute': 'x-blockdev-change', 'arguments':{ 'parent': 'colo-disk0', +'node': 'replication0' } } + +{'execute': 'object-add', 'arguments':{ 'qom-type': 'filter-mirror', +'id': 'm0', 'props': { 'netdev': 'hn0', 'queue': 'tx', 'outdev': +'mirror0' } } } +{'execute': 'object-add', 'arguments':{ 'qom-type': +'filter-redirector', 'id': 'redire0', 'props': { 'netdev': 'hn0', +'queue': 'rx', 'indev': 'compare_out' } } } +{'execute': 'object-add', 'arguments':{ 'qom-type': +'filter-redirector', 'id': 'redire1', 'props': { 'netdev': 'hn0', +'queue': 'rx', 'outdev': 'compare0' } } } +{'execute': 'object-add', 'arguments':{ 'qom-type': 'iothread', 'id': +'iothread1' } } +{'execute': 'object-add', 'arguments':{ 'qom-type': 'colo-compare', +'id': 'comp0', 'props': { 'primary_in': 'compare0-0', 'secondary_in': +'compare1', 'outdev': 'compare_out0', 'iothread': 'iothread1' } } } + +{'execute': 'migrate-set-capabilities', 'arguments':{ 'capabilities': [ +{'capability': 'x-colo', 'state': true } ] } } +{'execute': 'migrate', 'arguments':{ 'uri': 'tcp:127.0.0.1:9998' } } + +Note: +If this Primary previously was a Secondary, then we need to insert thedocs/COLO-FT.txt
Quoted 10 lines
docs/COLO-FT.txt +10
-0+filters before the filter-rewriter by using the +"'insert': 'before', 'position': 'rew0'" Options. See below. + +== Secondary resume replication == +Become Primary and resume replication after new Secondary is up. + +Start the new Secondary, then: +{'execute': 'drive-mirror', 'arguments':{ 'device': 'colo-disk0', +'job-id': 'resync', 'target': 'nbd://127.0.0.1:9999/parent0', 'mode': +'existing', 'format': 'raw', 'sync': 'full'} }Same issue as primary resume.
I want to re-tested the resume function but got stuck here.
Thanks
Zhang ChenQuoted 43 lines
docs/COLO-FT.txt +35
-5+ +Wait until disk is synced, then: +{'execute': 'stop'} +{'execute': 'block-job-cancel', 'arguments':{ 'device': 'resync' } } + +{'execute': 'human-monitor-command', 'arguments':{ 'command-line': +'drive_add -n buddy +driver=replication,mode=primary,file.driver=nbd,file.host=127.0.0.1,fil +e.port=9999,file.export=parent0,node-name=replication0'}} +{'execute': 'x-blockdev-change', 'arguments':{ 'parent': 'colo-disk0', +'node': 'replication0' } } + +{'execute': 'object-add', 'arguments':{ 'qom-type': 'filter-mirror', +'id': 'm0', 'props': { 'insert': 'before', 'position': 'rew0', +'netdev': 'hn0', 'queue': 'tx', 'outdev': 'mirror0' } } } +{'execute': 'object-add', 'arguments':{ 'qom-type': +'filter-redirector', 'id': 'redire0', 'props': { 'insert': 'before', +'position': 'rew0', 'netdev': 'hn0', 'queue': 'rx', 'indev': +'compare_out' } } } +{'execute': 'object-add', 'arguments':{ 'qom-type': +'filter-redirector', 'id': 'redire1', 'props': { 'insert': 'before', +'position': 'rew0', 'netdev': 'hn0', 'queue': 'rx', 'outdev': +'compare0' } } } +{'execute': 'object-add', 'arguments':{ 'qom-type': 'iothread', 'id': +'iothread1' } } +{'execute': 'object-add', 'arguments':{ 'qom-type': 'colo-compare', +'id': 'comp0', 'props': { 'primary_in': 'compare0-0', 'secondary_in': +'compare1', 'outdev': 'compare_out0', 'iothread': 'iothread1' } } } + +{'execute': 'migrate-set-capabilities', 'arguments':{ 'capabilities': [ +{'capability': 'x-colo', 'state': true } ] } } +{'execute': 'migrate', 'arguments':{ 'uri': 'tcp:127.0.0.1:9998' } } == TODO == -1. Support continuous VM replication. -2. Support shared storage. -3. Develop the heartbeat part. -4. Reduce checkpoint VM’s downtime while doing checkpoint. +1. Support shared storage. +2. Develop the heartbeat part. +3. Reduce checkpoint VM’s downtime while doing checkpoint. --2.20.1