Skip to contentSkip to conversation

watchdog: Correct iTCO for Cannon Lake and beyond

PATCH Applied Mika Westerberg 2 participants 5 messages Aug 31, 2019 – Sep 3, 2019

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v2 cover watchdog: Correct iTCO for Cannon Lake and beyond

Hi,

Starting from Intel Cannon Lake PCH the NO_REBOOT bit which is required by the iTCO driver was moved from private register space to be part of the TCO1_CNT register. This series introduces a new iTCO version (6) that gets set for Cannon Lake, Cedar Fork, Comet Lake, Elkhart Lake and Ice Lake which are affected by this move.

The previous version of the series can be found here:

https://lore.kernel.org/linux-watchdog/[email protected]/

Changes from v1:

* Include <linux/bits.h> for BIT()
* Re-organize code so that v4 support is before v6
* Move check for acpi_has_watchdog() to i801_add_tco()
* Added tags from Jean and Guenter.

Mika Westerberg (2):
watchdog: iTCO: Add support for Cannon Lake PCH iTCO
i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond

 drivers/i2c/busses/i2c-i801.c | 142 +++++++++++++++++++++-------------
 drivers/watchdog/iTCO_wdt.c   |  26 ++++++-
 2 files changed, 112 insertions(+), 56 deletions(-)
Signature · 1 line
2.23.0.rc1
#1 lore raw

PATCH v2 1/2 watchdog: iTCO: Add support for Cannon Lake PCH iTCO

In Intel Cannon Lake PCH the NO_REBOOT bit was moved from the private register space to be part of the TCO1_CNT register. For this reason introduce another version (6) that uses this register to set and clear NO_REBOOT bit.

---
 drivers/watchdog/iTCO_wdt.c | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)
drivers/watchdog/iTCO_wdt.c +24 -2
index c559f706ae7e..156360e37714 100644
@@ -48,6 +48,7 @@
 
 /* Includes */
 #include <linux/acpi.h>			/* For ACPI support */
+#include <linux/bits.h>			/* For BIT() */
 #include <linux/module.h>		/* For module specific items */
 #include <linux/moduleparam.h>		/* For new moduleparam's */
 #include <linux/types.h>		/* For standard types (like size_t) */
@@ -215,6 +216,23 @@ static int update_no_reboot_bit_mem(void *priv, bool set)
 	return 0;
 }
 
+static int update_no_reboot_bit_cnt(void *priv, bool set)
+{
+	struct iTCO_wdt_private *p = priv;
+	u16 val, newval;
+
+	val = inw(TCO1_CNT(p));
+	if (set)
+		val |= BIT(0);
+	else
+		val &= ~BIT(0);
+	outw(val, TCO1_CNT(p));
+	newval = inw(TCO1_CNT(p));
+
+	/* make sure the update is successful */
+	return val != newval ? -EIO : 0;
+}
+
 static void iTCO_wdt_no_reboot_bit_setup(struct iTCO_wdt_private *p,
 		struct itco_wdt_platform_data *pdata)
 {
@@ -224,7 +242,9 @@ static void iTCO_wdt_no_reboot_bit_setup(struct iTCO_wdt_private *p,
 		return;
 	}
 
-	if (p->iTCO_version >= 2)
+	if (p->iTCO_version >= 6)
+		p->update_no_reboot_bit = update_no_reboot_bit_cnt;
+	else if (p->iTCO_version >= 2)
 		p->update_no_reboot_bit = update_no_reboot_bit_mem;
 	else if (p->iTCO_version == 1)
 		p->update_no_reboot_bit = update_no_reboot_bit_pci;
@@ -452,7 +472,8 @@ static int iTCO_wdt_probe(struct platform_device *pdev)
 	 * Get the Memory-Mapped GCS or PMC register, we need it for the
 	 * NO_REBOOT flag (TCO v2 and v3).
 	 */
-	if (p->iTCO_version >= 2 && !pdata->update_no_reboot_bit) {
+	if (p->iTCO_version >= 2 && p->iTCO_version < 6 &&
+	    !pdata->update_no_reboot_bit) {
 		p->gcs_pmc_res = platform_get_resource(pdev,
 						       IORESOURCE_MEM,
 						       ICH_RES_MEM_GCS_PMC);
@@ -502,6 +523,7 @@ static int iTCO_wdt_probe(struct platform_device *pdev)
 
 	/* Clear out the (probably old) status */
 	switch (p->iTCO_version) {
+	case 6:
 	case 5:
 	case 4:
 		outw(0x0008, TCO1_STS(p)); /* Clear the Time Out Status bit */
Signature · 1 line
2.23.0.rc1
Applied
#2 lore raw

Re: [PATCH v2 1/2] watchdog: iTCO: Add support for Cannon Lake PCH iTCO

Quoted 8 lines · Mika Westerberg

In Intel Cannon Lake PCH the NO_REBOOT bit was moved from the private register space to be part of the TCO1_CNT register. For this reason introduce another version (6) that uses this register to set and clear NO_REBOOT bit.

Applied to for-next, thanks!

#3 lore raw

PATCH v2 2/2 i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond

In reply to Mika Westerberg

Intel Cannon Lake PCH moved the NO_REBOOT bit to reside as part of the TCO registers instead so update the i2c-i801 driver so that for Cannon Lake and beyond register platform device for iTCO using version 6. The affected PCHs are Cannon Lake, Cedar Fork, Comet Lake, Elkhart Lake and Ice Lake.

---
 drivers/i2c/busses/i2c-i801.c | 142 +++++++++++++++++++++-------------
 1 file changed, 88 insertions(+), 54 deletions(-)
drivers/i2c/busses/i2c-i801.c +88 -54
index f2956936c3f2..ebb3f7f17b95 100644
@@ -292,7 +292,8 @@ struct i801_priv {
 #define FEATURE_HOST_NOTIFY	BIT(5)
 /* Not really a feature, but it's convenient to handle it as such */
 #define FEATURE_IDF		BIT(15)
-#define FEATURE_TCO		BIT(16)
+#define FEATURE_TCO_SPT		BIT(16)
+#define FEATURE_TCO_CNL		BIT(17)
 
 static const char *i801_feature_names[] = {
 	"SMBus PEC",
@@ -1491,57 +1492,23 @@ static inline unsigned int i801_get_adapter_class(struct i801_priv *priv)
 }
 #endif
 
-static const struct itco_wdt_platform_data tco_platform_data = {
+static const struct itco_wdt_platform_data spt_tco_platform_data = {
 	.name = "Intel PCH",
 	.version = 4,
 };
 
 static DEFINE_SPINLOCK(p2sb_spinlock);
 
-static void i801_add_tco(struct i801_priv *priv)
+static struct platform_device *
+i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev,
+		 struct resource *tco_res)
 {
-	struct pci_dev *pci_dev = priv->pci_dev;
-	struct resource tco_res[3], *res;
-	struct platform_device *pdev;
+	struct resource *res;
 	unsigned int devfn;
-	u32 tco_base, tco_ctl;
-	u32 base_addr, ctrl_val;
 	u64 base64_addr;
+	u32 base_addr;
 	u8 hidden;
 
-	if (!(priv->features & FEATURE_TCO))
-		return;
-
-	pci_read_config_dword(pci_dev, TCOBASE, &tco_base);
-	pci_read_config_dword(pci_dev, TCOCTL, &tco_ctl);
-	if (!(tco_ctl & TCOCTL_EN))
-		return;
-
-	memset(tco_res, 0, sizeof(tco_res));
-
-	res = &tco_res[ICH_RES_IO_TCO];
-	res->start = tco_base & ~1;
-	res->end = res->start + 32 - 1;
-	res->flags = IORESOURCE_IO;
-
-	/*
-	 * Power Management registers.
-	 */
-	devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 2);
-	pci_bus_read_config_dword(pci_dev->bus, devfn, ACPIBASE, &base_addr);
-
-	res = &tco_res[ICH_RES_IO_SMI];
-	res->start = (base_addr & ~1) + ACPIBASE_SMI_OFF;
-	res->end = res->start + 3;
-	res->flags = IORESOURCE_IO;
-
-	/*
-	 * Enable the ACPI I/O space.
-	 */
-	pci_bus_read_config_dword(pci_dev->bus, devfn, ACPICTRL, &ctrl_val);
-	ctrl_val |= ACPICTRL_EN;
-	pci_bus_write_config_dword(pci_dev->bus, devfn, ACPICTRL, ctrl_val);
-
 	/*
 	 * We must access the NO_REBOOT bit over the Primary to Sideband
 	 * bridge (P2SB). The BIOS prevents the P2SB device from being
@@ -1577,15 +1544,76 @@ static void i801_add_tco(struct i801_priv *priv)
 	res->end = res->start + 3;
 	res->flags = IORESOURCE_MEM;
 
-	pdev = platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
-						 tco_res, 3, &tco_platform_data,
-						 sizeof(tco_platform_data));
-	if (IS_ERR(pdev)) {
-		dev_warn(&pci_dev->dev, "failed to create iTCO device\n");
+	return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
+					tco_res, 3, &spt_tco_platform_data,
+					sizeof(spt_tco_platform_data));
+}
+
+static const struct itco_wdt_platform_data cnl_tco_platform_data = {
+	.name = "Intel PCH",
+	.version = 6,
+};
+
+static struct platform_device *
+i801_add_tco_cnl(struct i801_priv *priv, struct pci_dev *pci_dev,
+		 struct resource *tco_res)
+{
+	return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
+					tco_res, 2, &cnl_tco_platform_data,
+					sizeof(cnl_tco_platform_data));
+}
+
+static void i801_add_tco(struct i801_priv *priv)
+{
+	u32 base_addr, tco_base, tco_ctl, ctrl_val;
+	struct pci_dev *pci_dev = priv->pci_dev;
+	struct resource tco_res[3], *res;
+	unsigned int devfn;
+
+	/* If we have ACPI based watchdog use that instead */
+	if (acpi_has_watchdog())
+		return;
+
+	if (!(priv->features & (FEATURE_TCO_SPT | FEATURE_TCO_CNL)))
 		return;
-	}
 
-	priv->tco_pdev = pdev;
+	pci_read_config_dword(pci_dev, TCOBASE, &tco_base);
+	pci_read_config_dword(pci_dev, TCOCTL, &tco_ctl);
+	if (!(tco_ctl & TCOCTL_EN))
+		return;
+
+	memset(tco_res, 0, sizeof(tco_res));
+
+	res = &tco_res[ICH_RES_IO_TCO];
+	res->start = tco_base & ~1;
+	res->end = res->start + 32 - 1;
+	res->flags = IORESOURCE_IO;
+
+	/*
+	 * Power Management registers.
+	 */
+	devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 2);
+	pci_bus_read_config_dword(pci_dev->bus, devfn, ACPIBASE, &base_addr);
+
+	res = &tco_res[ICH_RES_IO_SMI];
+	res->start = (base_addr & ~1) + ACPIBASE_SMI_OFF;
+	res->end = res->start + 3;
+	res->flags = IORESOURCE_IO;
+
+	/*
+	 * Enable the ACPI I/O space.
+	 */
+	pci_bus_read_config_dword(pci_dev->bus, devfn, ACPICTRL, &ctrl_val);
+	ctrl_val |= ACPICTRL_EN;
+	pci_bus_write_config_dword(pci_dev->bus, devfn, ACPICTRL, ctrl_val);
+
+	if (priv->features & FEATURE_TCO_CNL)
+		priv->tco_pdev = i801_add_tco_cnl(priv, pci_dev, tco_res);
+	else
+		priv->tco_pdev = i801_add_tco_spt(priv, pci_dev, tco_res);
+
+	if (IS_ERR(priv->tco_pdev))
+		dev_warn(&pci_dev->dev, "failed to create iTCO device\n");
 }
 
 #ifdef CONFIG_ACPI
@@ -1695,13 +1723,21 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	switch (dev->device) {
 	case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS:
 	case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS:
-	case PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS:
-	case PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS:
 	case PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS:
 	case PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS:
-	case PCI_DEVICE_ID_INTEL_CDF_SMBUS:
 	case PCI_DEVICE_ID_INTEL_DNV_SMBUS:
 	case PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS:
+		priv->features |= FEATURE_I2C_BLOCK_READ;
+		priv->features |= FEATURE_IRQ;
+		priv->features |= FEATURE_SMBUS_PEC;
+		priv->features |= FEATURE_BLOCK_BUFFER;
+		priv->features |= FEATURE_TCO_SPT;
+		priv->features |= FEATURE_HOST_NOTIFY;
+		break;
+
+	case PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS:
+	case PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS:
+	case PCI_DEVICE_ID_INTEL_CDF_SMBUS:
 	case PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS:
 	case PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS:
 	case PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS:
@@ -1711,9 +1747,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		priv->features |= FEATURE_IRQ;
 		priv->features |= FEATURE_SMBUS_PEC;
 		priv->features |= FEATURE_BLOCK_BUFFER;
-		/* If we have ACPI based watchdog use that instead */
-		if (!acpi_has_watchdog())
-			priv->features |= FEATURE_TCO;
+		priv->features |= FEATURE_TCO_CNL;
 		priv->features |= FEATURE_HOST_NOTIFY;
 		break;
 
Signature · 1 line
2.23.0.rc1
Applied
#4 lore raw

Re: [PATCH v2 2/2] i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond

Quoted 8 lines · Mika Westerberg

Intel Cannon Lake PCH moved the NO_REBOOT bit to reside as part of the TCO registers instead so update the i2c-i801 driver so that for Cannon Lake and beyond register platform device for iTCO using version 6. The affected PCHs are Cannon Lake, Cedar Fork, Comet Lake, Elkhart Lake and Ice Lake.

Applied to for-next, thanks!