Second set of new device support, cleanups etc for IIO in the 5.4 cycle.
Jonathan Cameron
maintainerThe following changes since commit 81e0da703fdba1ee126868bf8350592c79cdba13:
staging: sm750fb: fix odd license text (2019-08-15 14:43:57 +0200)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.4b-take3
for you to fetch changes up to 6fa029486b74c266c39b718b8643ed42d24f977a:
iio: imu: st_lsm6dsx: rely on IIO_G_TO_M_S_2 for gain definition for LSM9DS1 (2019-09-03 21:11:28 +0100)
----------------------------------------------------------------
Second set of new device support, cleanups and features for IIO in the 5.4 cycle
Revised pull request to fix up a missing Signed-off-by and roll in a fix in the lsm9ds1 support after I broke it when applying. Revised again because the fix changed a hash meaning a fix that previously followed it now had the wrong fixes tag.
A few fixes in here that could have gone a faster path but aren't quite worth the rush for 5.3.
New device support
* ad7606
- Support the ad7606b which adds a software controlled mode alongside the pin controlled only approach of the ad7606. Including dt-bindings.
* lsm6dsx
- Add support for the gyro and accelerometer part of the lsm9ds1 which is a compound device also including a magnetometer (st_sensors driver). Includes bindings and precursor rework of the driver.
Features
* ad7192
- Add support for low pass filter control.
- DT binding docs.
Cleanups and minor fixes
* MAINTAINERS
- Fix a typo in a path.
- Add entry for ad7606
* ad5380
- Fix a failure to dereference a pointer before atempting to assign the value.
* ad7192
- Drop platform data as not used in mainline and we now have full DT bindings.
* ad7606
- YAML conversion for dt-bindings.
* adis16240
- Rework write_raw to make it more readable using GENMASK.
* adis16460
- Fix and issue with an unsigned variable holding potential negatives.
* cros_ec
- Fix missing default of calibration vector so that we get 'something' before calibration is complete on a given axis.
* hid-sensors
- Use int_pow instead of opencoding.
* isl29501
- rename dt-binding docs to include renesas inline with other renesas parts and general current convention.
* kxcjk1013
- Improve comments on the 'unusual' ACPI ids used to identify which sensor is which in certain laptops.
* lsm6dsx
- Add one bit to the fifo status masks for a number of parts.
- Drop a reserved entry from the sensitivity values to tidy up interface.
- Use core conversion macro from G to m/s^2 for lsm9ds1 to make it easier to relate to the datasheet and consistent with other parts supported.
* max1027
- Use device managed APIs to avoid manual error handling and cleanup.
* rfd77402
- Typo in Kconfig help.
* sc27xx
- Switch to polling mode from interrupts as interrupt handling typically to slow for very short sleeps.
* st-sensors
- Fix some missing selects for regmap.
* tools
- Add a .gitignore containing the binary outputs.
----------------------------------------------------------------
Alexandru Ardelean (1):
iio: imu: adis16460: fix variable signedness
Andy Shevchenko (1):
iio: hid-sensor-attributes: Convert to use int_pow()
Bartosz Golaszewski (1):
tools: iio: add .gitignore
Beniamin Bia (3):
MAINTAINERS: Add Beniamin Bia for AD7606 driver
dt-bindings: iio: adc: Migrate AD7606 documentation to yaml
dt-bindings: iio: adc: Add AD7606B ADC documentation
Christophe JAILLET (1):
Kconfig: Fix the reference to the RFD77402 ToF sensor in the 'help' section
Chuhong Yuan (1):
iio: adc: max1027: Use device-managed APIs
Colin Ian King (1):
iio: dac: ad5380: fix incorrect assignment to val
Denis Efremov (1):
MAINTAINERS: ftm-quaddec: Fix typo in a filepath
Freeman Liu (1):
iio: adc: sc27xx: Change to polling mode to read data
Gwendal Grignou (1):
iio: cros_ec: set calibscale for 3d MEMS to unit vector
Hans de Goede (1):
iio: accel: kxcjk1013: Improve comments on KIOX010A and KIOX020A ACPI ids
Lorenzo Bianconi (3):
iio: imu: st_lsm6dsx: introduce update_fifo function pointer
iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1
iio: imu: st_lsm6dsx: rely on IIO_G_TO_M_S_2 for gain definition for LSM9DS1
Martin Kepplinger (3):
iio: imu: st_lsm6dsx: move register definitions to sensor_settings struct
iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1
dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings
Mircea Caprioru (3):
staging: iio: adc: ad7192: Remove platform data
staging: iio: adc: ad7192: Add low_pass_3db_filter_frequency
dt-bindings: iio: adc: ad7192: Add binding documentation for AD7192
Rodrigo Ribeiro (1):
staging: iio: accel: adis16240: Improve readability on write_raw function
Simon Horman (1):
dt-bindings: iio: light: isl29501: Rename bindings documentation file
Stefan Popa (1):
iio: adc: ad7606: Add support for AD7606B ADC
YueHaibing (1):
iio: st_sensors: Fix build error
mario tesi (1):
iio: imu: st_lsm6dsx: Fix FIFO diff mask for tagged fifo
.../devicetree/bindings/iio/adc/adi,ad7192.yaml | 121 +++++++++++++++
.../devicetree/bindings/iio/adc/adi,ad7606.txt | 66 ---------
.../devicetree/bindings/iio/adc/adi,ad7606.yaml | 138 +++++++++++++++++
.../devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 +
.../light/{isl29501.txt => renesas,isl29501.txt} | 0
MAINTAINERS | 5 +-
drivers/iio/accel/kxcjk-1013.c | 4 +-
drivers/iio/adc/ad7606.c | 13 +-
drivers/iio/adc/ad7606.h | 4 +
drivers/iio/adc/ad7606_spi.c | 109 +++++++++++++-
drivers/iio/adc/max1027.c | 38 +----
drivers/iio/adc/sc27xx_adc.c | 81 ++++------
.../common/cros_ec_sensors/cros_ec_sensors_core.c | 5 +-
.../iio/common/hid-sensors/hid-sensor-attributes.c | 53 +++----
drivers/iio/common/st_sensors/Kconfig | 2 +
drivers/iio/dac/ad5380.c | 2 +-
drivers/iio/imu/adis16460.c | 2 +-
drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 12 ++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 19 ++-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 139 ++++++++++++++++--
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +
drivers/iio/proximity/Kconfig | 2 +-
drivers/staging/iio/accel/adis16240.c | 5 +-
drivers/staging/iio/adc/ad7192.c | 163 +++++++++++++++++----
drivers/staging/iio/adc/ad7192.h | 37 -----
tools/iio/.gitignore | 4 +
28 files changed, 756 insertions(+), 281 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7606.txt
create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
rename Documentation/devicetree/bindings/iio/light/{isl29501.txt => renesas,isl29501.txt} (100%)
delete mode 100644 drivers/staging/iio/adc/ad7192.h
create mode 100644 tools/iio/.gitignoreQuoted 7 lines · Jonathan Cameron
The following changes since commit
81e0da703fdba1ee126868bf8350592c79cdba13:staging: sm750fb: fix odd license text (2019-08-15 14:43:57 +0200)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.gittags/iio-for-5.4b-take3
This one worked :)
Now pulled and pushed out, thanks.
greg k-h
Quoted 80 lines · Jonathan Cameron
The following changes since commit
81e0da703fdba1ee126868bf8350592c79cdba13:staging: sm750fb: fix odd license text (2019-08-15 14:43:57 +0200)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.gittags/iio-for-5.4b-take3for you to fetch changes up to
6fa029486b74c266c39b718b8643ed42d24f977a:iio: imu:
st_lsm6dsx: rely onIIO_G_TO_M_S_2for gain definition for LSM9DS1 (2019-09-03 21:11:28 +0100)----------------------------------------------------------------
Second set of new device support, cleanups and features for IIO in the 5.4 cycleRevised pull request to fix up a missing Signed-off-by and roll in a fix in the lsm9ds1 support after I broke it when applying. Revised again because the fix changed a hash meaning a fix that previously followed it now had the wrong fixes tag.
A few fixes in here that could have gone a faster path but aren't quite worth the rush for 5.3.
New device support
* ad7606
- Support the ad7606b which adds a software controlled mode alongside the pin controlled only approach of the ad7606. Including dt-bindings.
* lsm6dsx
- Add support for the gyro and accelerometer part of the lsm9ds1 which is a compound device also including a magnetometer (st_sensorsdriver). Includes bindings and precursor rework of the driver.Features
* ad7192
- Add support for low pass filter control.
- DT binding docs.Cleanups and minor fixes
*MAINTAINERS
- Fix a typo in a path.
- Add entry for ad7606
* ad5380
- Fix a failure to dereference a pointer before atempting to assign the value.
* ad7192
- Drop platform data as not used in mainline and we now have full DT bindings.
* ad7606
- YAML conversion for dt-bindings.
* adis16240
- Reworkwrite_rawto make it more readable using GENMASK.
* adis16460
- Fix and issue with an unsigned variable holding potential negatives.
*cros_ec
- Fix missing default of calibration vector so that we get 'something' before calibration is complete on a given axis.
* hid-sensors
- Useint_powinstead of opencoding.
* isl29501
- rename dt-binding docs to include renesas inline with other renesas parts and general current convention.
* kxcjk1013
- Improve comments on the 'unusual' ACPI ids used to identify which sensor is which in certain laptops.
* lsm6dsx
- Add one bit to the fifo status masks for a number of parts.
- Drop a reserved entry from the sensitivity values to tidy up interface.
- Use core conversion macro from G to m/s^2 for lsm9ds1 to make it easier to relate to the datasheet and consistent with other parts supported.
* max1027
- Use device managed APIs to avoid manual error handling and cleanup.
* rfd77402
- Typo inKconfighelp.
* sc27xx
- Switch to polling mode from interrupts as interrupt handling typically to slow for very short sleeps.
* st-sensors
- Fix some missing selects for regmap.
* tools
- Add a .gitignore containing the binary outputs.
Quoted 6 lines
----------------------------------------------------------------
Alexandru Ardelean (1):
iio: imu: adis16460: fix variable signednessAndy Shevchenko (1):
iio: hid-sensor-attributes: Convert to useint_pow()
This patch causes a linking failure on arm32 when CONFIG_HID_SENSOR_HUB and CONFIG_HID_SENSOR_IIO_COMMON are set (I caught this on arm32 allyesconfig):
arm-linux-gnueabi-ld: drivers/iio/common/hid-sensors/hid-sensor-attributes.o: in function `hid_sensor_read_raw_hyst_value':
hid-sensor-attributes.c:(.text+0x23c): undefined reference to `__aeabi_uldivmod'
arm-linux-gnueabi-ld: hid-sensor-attributes.c:(.text+0x280): undefined reference to `__aeabi_uldivmod'
arm-linux-gnueabi-ld: drivers/iio/common/hid-sensors/hid-sensor-attributes.o: in function `hid_sensor_format_scale':
hid-sensor-attributes.c:(.text+0x388): undefined reference to `__aeabi_uldivmod'
arm-linux-gnueabi-ld: hid-sensor-attributes.c:(.text+0x3b0): undefined reference to `__aeabi_uldivmod'
arm-linux-gnueabi-ld: hid-sensor-attributes.c:(.text+0x414): undefined reference to `__aeabi_uldivmod'
arm-linux-gnueabi-ld: drivers/iio/common/hid-sensors/hid-sensor-attributes.o:hid-sensor-attributes.c:(.text+0x444): more undefined references to `__aeabi_uldivmod' follow
int_pow() returns u64, which causes issues when just trying to use normal division. Looks like most of the dividends are 32-bit so not really sure how to resolve this otherwise I would have sent a patch. Please look into this when you get a chance.
Cheers,
Nathan
Quoted 101 lines · Nathan Chancellor
Quoted 80 lines · Jonathan Cameron
The following changes since commit
81e0da703fdba1ee126868bf8350592c79cdba13:staging: sm750fb: fix odd license text (2019-08-15 14:43:57 +0200)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.gittags/iio-for-5.4b-take3for you to fetch changes up to
6fa029486b74c266c39b718b8643ed42d24f977a:iio: imu:
st_lsm6dsx: rely onIIO_G_TO_M_S_2for gain definition for LSM9DS1 (2019-09-03 21:11:28 +0100)----------------------------------------------------------------
Second set of new device support, cleanups and features for IIO in the 5.4 cycleRevised pull request to fix up a missing Signed-off-by and roll in a fix in the lsm9ds1 support after I broke it when applying. Revised again because the fix changed a hash meaning a fix that previously followed it now had the wrong fixes tag.
A few fixes in here that could have gone a faster path but aren't quite worth the rush for 5.3.
New device support
* ad7606
- Support the ad7606b which adds a software controlled mode alongside the pin controlled only approach of the ad7606. Including dt-bindings.
* lsm6dsx
- Add support for the gyro and accelerometer part of the lsm9ds1 which is a compound device also including a magnetometer (st_sensorsdriver). Includes bindings and precursor rework of the driver.Features
* ad7192
- Add support for low pass filter control.
- DT binding docs.Cleanups and minor fixes
*MAINTAINERS
- Fix a typo in a path.
- Add entry for ad7606
* ad5380
- Fix a failure to dereference a pointer before atempting to assign the value.
* ad7192
- Drop platform data as not used in mainline and we now have full DT bindings.
* ad7606
- YAML conversion for dt-bindings.
* adis16240
- Reworkwrite_rawto make it more readable using GENMASK.
* adis16460
- Fix and issue with an unsigned variable holding potential negatives.
*cros_ec
- Fix missing default of calibration vector so that we get 'something' before calibration is complete on a given axis.
* hid-sensors
- Useint_powinstead of opencoding.
* isl29501
- rename dt-binding docs to include renesas inline with other renesas parts and general current convention.
* kxcjk1013
- Improve comments on the 'unusual' ACPI ids used to identify which sensor is which in certain laptops.
* lsm6dsx
- Add one bit to the fifo status masks for a number of parts.
- Drop a reserved entry from the sensitivity values to tidy up interface.
- Use core conversion macro from G to m/s^2 for lsm9ds1 to make it easier to relate to the datasheet and consistent with other parts supported.
* max1027
- Use device managed APIs to avoid manual error handling and cleanup.
* rfd77402
- Typo inKconfighelp.
* sc27xx
- Switch to polling mode from interrupts as interrupt handling typically to slow for very short sleeps.
* st-sensors
- Fix some missing selects for regmap.
* tools
- Add a .gitignore containing the binary outputs.Quoted 6 lines
----------------------------------------------------------------
Alexandru Ardelean (1):
iio: imu: adis16460: fix variable signednessAndy Shevchenko (1):
iio: hid-sensor-attributes: Convert to useint_pow()This patch causes a linking failure on arm32 when
CONFIG_HID_SENSOR_HUBandCONFIG_HID_SENSOR_IIO_COMMONare set (I caught this on arm32 allyesconfig):arm-linux-gnueabi-ld:
drivers/iio/common/hid-sensors/hid-sensor-attributes.o: in function `hid_sensor_read_raw_hyst_value':
hid-sensor-attributes.c:(.text+0x23c): undefined reference to `__aeabi_uldivmod'
arm-linux-gnueabi-ld: hid-sensor-attributes.c:(.text+0x280): undefined reference to `__aeabi_uldivmod'
arm-linux-gnueabi-ld:drivers/iio/common/hid-sensors/hid-sensor-attributes.o: in function `hid_sensor_format_scale':
hid-sensor-attributes.c:(.text+0x388): undefined reference to `__aeabi_uldivmod'
arm-linux-gnueabi-ld: hid-sensor-attributes.c:(.text+0x3b0): undefined reference to `__aeabi_uldivmod'
arm-linux-gnueabi-ld: hid-sensor-attributes.c:(.text+0x414): undefined reference to `__aeabi_uldivmod'
arm-linux-gnueabi-ld: drivers/iio/common/hid-sensors/hid-sensor-attributes.o:hid-sensor-attributes.c:(.text+0x444): more undefined references to `__aeabi_uldivmod' follow
Quoted 4 lines
int_pow()returns u64, which causes issues when just trying to use normal division. Looks like most of the dividends are 32-bit so not really sure how to resolve this otherwise I would have sent a patch. Please look into this when you get a chance.
0-day is now reporting this as well :(
Quoted 102 lines · On Thu, 5 Sep 2019 07:34:49 +0200 Greg KH <[email protected]> wrote:
Quoted 101 lines · Nathan Chancellor
Quoted 80 lines · Jonathan Cameron
The following changes since commit
81e0da703fdba1ee126868bf8350592c79cdba13:staging: sm750fb: fix odd license text (2019-08-15 14:43:57 +0200)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.gittags/iio-for-5.4b-take3for you to fetch changes up to
6fa029486b74c266c39b718b8643ed42d24f977a:iio: imu:
st_lsm6dsx: rely onIIO_G_TO_M_S_2for gain definition for LSM9DS1 (2019-09-03 21:11:28 +0100)----------------------------------------------------------------
Second set of new device support, cleanups and features for IIO in the 5.4 cycleRevised pull request to fix up a missing Signed-off-by and roll in a fix in the lsm9ds1 support after I broke it when applying. Revised again because the fix changed a hash meaning a fix that previously followed it now had the wrong fixes tag.
A few fixes in here that could have gone a faster path but aren't quite worth the rush for 5.3.
New device support
* ad7606
- Support the ad7606b which adds a software controlled mode alongside the pin controlled only approach of the ad7606. Including dt-bindings.
* lsm6dsx
- Add support for the gyro and accelerometer part of the lsm9ds1 which is a compound device also including a magnetometer (st_sensorsdriver). Includes bindings and precursor rework of the driver.Features
* ad7192
- Add support for low pass filter control.
- DT binding docs.Cleanups and minor fixes
*MAINTAINERS
- Fix a typo in a path.
- Add entry for ad7606
* ad5380
- Fix a failure to dereference a pointer before atempting to assign the value.
* ad7192
- Drop platform data as not used in mainline and we now have full DT bindings.
* ad7606
- YAML conversion for dt-bindings.
* adis16240
- Reworkwrite_rawto make it more readable using GENMASK.
* adis16460
- Fix and issue with an unsigned variable holding potential negatives.
*cros_ec
- Fix missing default of calibration vector so that we get 'something' before calibration is complete on a given axis.
* hid-sensors
- Useint_powinstead of opencoding.
* isl29501
- rename dt-binding docs to include renesas inline with other renesas parts and general current convention.
* kxcjk1013
- Improve comments on the 'unusual' ACPI ids used to identify which sensor is which in certain laptops.
* lsm6dsx
- Add one bit to the fifo status masks for a number of parts.
- Drop a reserved entry from the sensitivity values to tidy up interface.
- Use core conversion macro from G to m/s^2 for lsm9ds1 to make it easier to relate to the datasheet and consistent with other parts supported.
* max1027
- Use device managed APIs to avoid manual error handling and cleanup.
* rfd77402
- Typo inKconfighelp.
* sc27xx
- Switch to polling mode from interrupts as interrupt handling typically to slow for very short sleeps.
* st-sensors
- Fix some missing selects for regmap.
* tools
- Add a .gitignore containing the binary outputs.Quoted 6 lines
----------------------------------------------------------------
Alexandru Ardelean (1):
iio: imu: adis16460: fix variable signednessAndy Shevchenko (1):
iio: hid-sensor-attributes: Convert to useint_pow()This patch causes a linking failure on arm32 when
CONFIG_HID_SENSOR_HUBandCONFIG_HID_SENSOR_IIO_COMMONare set (I caught this on arm32 allyesconfig):arm-linux-gnueabi-ld:
drivers/iio/common/hid-sensors/hid-sensor-attributes.o: in function `hid_sensor_read_raw_hyst_value':
hid-sensor-attributes.c:(.text+0x23c): undefined reference to `__aeabi_uldivmod'
arm-linux-gnueabi-ld: hid-sensor-attributes.c:(.text+0x280): undefined reference to `__aeabi_uldivmod'
arm-linux-gnueabi-ld:drivers/iio/common/hid-sensors/hid-sensor-attributes.o: in function `hid_sensor_format_scale':
hid-sensor-attributes.c:(.text+0x388): undefined reference to `__aeabi_uldivmod'
arm-linux-gnueabi-ld: hid-sensor-attributes.c:(.text+0x3b0): undefined reference to `__aeabi_uldivmod'
arm-linux-gnueabi-ld: hid-sensor-attributes.c:(.text+0x414): undefined reference to `__aeabi_uldivmod'
arm-linux-gnueabi-ld: drivers/iio/common/hid-sensors/hid-sensor-attributes.o:hid-sensor-attributes.c:(.text+0x444): more undefined references to `__aeabi_uldivmod' follow
Quoted 6 lines
Quoted 4 lines
int_pow()returns u64, which causes issues when just trying to use normal division. Looks like most of the dividends are 32-bit so not really sure how to resolve this otherwise I would have sent a patch. Please look into this when you get a chance.0-day is now reporting this as well :(
Yes sorry about this. I'd failed to chase up on why 0-day isn't building iio.git/testing any more which I'd come to rely on for 32bit coverage. I have a question out now on that + whether we should just revert this patch and revisit in the next cycle.
Thanks,
Jonathan