Skip to contentSkip to conversation

blk-iocost: Implement absolute debt handling

PATCH Applied Tejun Heo 2 participants 7 messages Sep 4, 2019 – Sep 10, 2019

Subsystems (3)
lore
Share & tools
lore

Tejun Heo

author maintainer
#0 lore raw

PATCH 1/1 blk-iocost: Implement absolute debt handling

Currently, when a given cgroup doesn't have enough budget, a forced or merged bio will advance the cgroup's vtime by the cost calculated according to the hierarchical weight at the time of issue. Once vtime is advanced, how the cgroup's weight changes doesn't matter. It has to wait until global vtime catches up with the cgroup's.

This means that the cost is calculated based on the hweight at the time of issuing but may later be paid at the wrong hweight. This, for example, can lead to a scenario like the following.

1. A cgroup with a very low hweight runs out of budget.

2. A storm of swap-out happens on it. All of them are scaled according to the current low hweight and charged to vtime pushing it to a far future.

3. All other cgroups go idle and now the above cgroup has access to the whole device. However, because vtime is already wound using the past low hweight, what its current hweight is doesn't matter until global vtime catches up to the local vtime.

4. As a result, either vrate gets ramped up extremely or the IOs stall while the underlying device is idle.

This patchset fixes the behavior by accounting the cost of forced or merged bios in absolute vtime rather than cgroup-relative. This allows the cgroup to pay back the debt with whatever actual budget it has each period removing the hweight discrepancy.

Note that !forced bios' costs are already accounted in absolute vtime. This patchset puts forced charges on the same ground.

This patchset contains the following five patches and is on top of the current linux-block.git for-next 35e7ae82f62b ("Merge branch 'for-5.4/block' into for-next").

0001-blk-iocost-Account-force-charged-overage-in-absolute.patch 0002-blk-iocost-Don-t-let-merges-push-vtime-into-the-futu.patch 0003-iocost_monitor-Always-use-strings-for-json-values.patch 0004-iocost_monitor-Report-more-info-with-higher-accuracy.patch 0005-iocost_monitor-Report-debt.patch

0001-0002 implement absolute debt handling. 0003-0005 improve the monitoring script and add debt reporting.

This patchset is also available in the following git branch.

git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git iocost-vdebt

diffstat follows. Thanks.

 block/blk-iocost.c             |   93 +++++++++++++++++++++++++++++++++--------
 tools/cgroup/iocost_monitor.py |   61 ++++++++++++++------------
 2 files changed, 110 insertions(+), 44 deletions(-)

--
tejun

author maintainer
#1 lore raw

PATCH 1/5 blk-iocost: Account force-charged overage in absolute vtime

Currently, when a bio needs to be force-charged and there isn't enough budget, vtime is simply pushed into the future. This means that the cost of the whole bio is scaled using the current hweight and then charged immediately. Until the global vtime advances beyond this future vtime, the cgroup won't be allowed to issue normal IOs.

This is incorrect and can lead to, for example, exploding vrate or extended stalls if vrate range is constrained. Consider the following scenario.

1. A cgroup with a very low hweight runs out of budget.

2. A storm of swap-out happens on it. All of them are scaled according to the current low hweight and charged to vtime pushing it to a far future.

3. All other cgroups go idle and now the above cgroup has access to the whole device. However, because vtime is already wound using the past low hweight, what its current hweight is doesn't matter until global vtime catches up to the local vtime.

4. As a result, either vrate gets ramped up extremely or the IOs stall while the underlying device is idle.

This is because the hweight the overage is calculated at is different from the hweight that it's being paid at.

Fix it by remembering the overage in absoulte vtime and continuously paying with the actual budget according to the current hweight at each period.

Note that non-forced bios which wait already remembers the cost in absolute vtime. This brings forced-bio accounting in line.

---
 block/blk-iocost.c | 62 ++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 55 insertions(+), 7 deletions(-)
block/blk-iocost.c +55 -7
index 2aae8ec391ef..5b0c024ee5dd 100644
@@ -469,6 +469,7 @@ struct ioc_gq {
 	 */
 	atomic64_t			vtime;
 	atomic64_t			done_vtime;
+	atomic64_t			abs_vdebt;
 	u64				last_vtime;
 
 	/*
@@ -653,13 +654,21 @@ static struct ioc_cgrp *blkcg_to_iocc(struct blkcg *blkcg)
 
 /*
  * Scale @abs_cost to the inverse of @hw_inuse.  The lower the hierarchical
- * weight, the more expensive each IO.
+ * weight, the more expensive each IO.  Must round up.
  */
 static u64 abs_cost_to_cost(u64 abs_cost, u32 hw_inuse)
 {
 	return DIV64_U64_ROUND_UP(abs_cost * HWEIGHT_WHOLE, hw_inuse);
 }
 
+/*
+ * The inverse of abs_cost_to_cost().  Must round up.
+ */
+static u64 cost_to_abs_cost(u64 cost, u32 hw_inuse)
+{
+	return DIV64_U64_ROUND_UP(cost * hw_inuse, HWEIGHT_WHOLE);
+}
+
 static void iocg_commit_bio(struct ioc_gq *iocg, struct bio *bio, u64 cost)
 {
 	bio->bi_iocost_cost = cost;
@@ -1132,16 +1141,36 @@ static void iocg_kick_waitq(struct ioc_gq *iocg, struct ioc_now *now)
 	struct iocg_wake_ctx ctx = { .iocg = iocg };
 	u64 margin_ns = (u64)(ioc->period_us *
 			      WAITQ_TIMER_MARGIN_PCT / 100) * NSEC_PER_USEC;
-	u64 vshortage, expires, oexpires;
+	u64 abs_vdebt, vdebt, vshortage, expires, oexpires;
+	s64 vbudget;
+	u32 hw_inuse;
 
 	lockdep_assert_held(&iocg->waitq.lock);
 
+	current_hweight(iocg, NULL, &hw_inuse);
+	vbudget = now->vnow - atomic64_read(&iocg->vtime);
+
+	/* pay off debt */
+	abs_vdebt = atomic64_read(&iocg->abs_vdebt);
+	vdebt = abs_cost_to_cost(abs_vdebt, hw_inuse);
+	if (vdebt && vbudget > 0) {
+		u64 delta = min_t(u64, vbudget, vdebt);
+		u64 abs_delta = min(cost_to_abs_cost(delta, hw_inuse),
+				    abs_vdebt);
+
+		atomic64_add(delta, &iocg->vtime);
+		atomic64_add(delta, &iocg->done_vtime);
+		atomic64_sub(abs_delta, &iocg->abs_vdebt);
+		if (WARN_ON_ONCE(atomic64_read(&iocg->abs_vdebt) < 0))
+			atomic64_set(&iocg->abs_vdebt, 0);
+	}
+
 	/*
 	 * Wake up the ones which are due and see how much vtime we'll need
 	 * for the next one.
 	 */
-	current_hweight(iocg, NULL, &ctx.hw_inuse);
-	ctx.vbudget = now->vnow - atomic64_read(&iocg->vtime);
+	ctx.hw_inuse = hw_inuse;
+	ctx.vbudget = vbudget - vdebt;
 	__wake_up_locked_key(&iocg->waitq, TASK_NORMAL, &ctx);
 	if (!waitqueue_active(&iocg->waitq))
 		return;
@@ -1187,6 +1216,11 @@ static void iocg_kick_delay(struct ioc_gq *iocg, struct ioc_now *now, u64 cost)
 	u64 vmargin = ioc->margin_us * now->vrate;
 	u64 margin_ns = ioc->margin_us * NSEC_PER_USEC;
 	u64 expires, oexpires;
+	u32 hw_inuse;
+
+	/* debt-adjust vtime */
+	current_hweight(iocg, NULL, &hw_inuse);
+	vtime += abs_cost_to_cost(atomic64_read(&iocg->abs_vdebt), hw_inuse);
 
 	/* clear or maintain depending on the overage */
 	if (time_before_eq64(vtime, now->vnow)) {
@@ -1332,12 +1366,14 @@ static void ioc_timer_fn(struct timer_list *timer)
 	 * should have woken up in the last period and expire idle iocgs.
 	 */
 	list_for_each_entry_safe(iocg, tiocg, &ioc->active_iocgs, active_list) {
-		if (!waitqueue_active(&iocg->waitq) && !iocg_is_idle(iocg))
+		if (!waitqueue_active(&iocg->waitq) &&
+		    !atomic64_read(&iocg->abs_vdebt) && !iocg_is_idle(iocg))
 			continue;
 
 		spin_lock(&iocg->waitq.lock);
 
-		if (waitqueue_active(&iocg->waitq)) {
+		if (waitqueue_active(&iocg->waitq) ||
+		    atomic64_read(&iocg->abs_vdebt)) {
 			/* might be oversleeping vtime / hweight changes, kick */
 			iocg_kick_waitq(iocg, &now);
 			iocg_kick_delay(iocg, &now, 0);
@@ -1673,13 +1709,24 @@ static void ioc_rqos_throttle(struct rq_qos *rqos, struct bio *bio)
 	 * in a while which is fine.
 	 */
 	if (!waitqueue_active(&iocg->waitq) &&
+	    !atomic64_read(&iocg->abs_vdebt) &&
 	    time_before_eq64(vtime + cost, now.vnow)) {
 		iocg_commit_bio(iocg, bio, cost);
 		return;
 	}
 
+	/*
+	 * We're over budget.  If @bio has to be issued regardless,
+	 * remember the abs_cost instead of advancing vtime.
+	 * iocg_kick_waitq() will pay off the debt before waking more IOs.
+	 * This way, the debt is continuously paid off each period with the
+	 * actual budget available to the cgroup.  If we just wound vtime,
+	 * we would incorrectly use the current hw_inuse for the entire
+	 * amount which, for example, can lead to the cgroup staying
+	 * blocked for a long time even with substantially raised hw_inuse.
+	 */
 	if (bio_issue_as_root_blkg(bio) || fatal_signal_pending(current)) {
-		iocg_commit_bio(iocg, bio, cost);
+		atomic64_add(abs_cost, &iocg->abs_vdebt);
 		iocg_kick_delay(iocg, &now, cost);
 		return;
 	}
@@ -1928,6 +1975,7 @@ static void ioc_pd_init(struct blkg_policy_data *pd)
 	iocg->ioc = ioc;
 	atomic64_set(&iocg->vtime, now.vnow);
 	atomic64_set(&iocg->done_vtime, now.vnow);
+	atomic64_set(&iocg->abs_vdebt, 0);
 	atomic64_set(&iocg->active_period, atomic64_read(&ioc->cur_period));
 	INIT_LIST_HEAD(&iocg->active_list);
 	iocg->hweight_active = HWEIGHT_WHOLE;
Signature · 1 line
2.17.1
author maintainer
#2 lore raw

PATCH 2/5 blk-iocost: Don't let merges push vtime into the future

In reply to Tejun Heo

Merges have the same problem that forced-bios had which is fixed by the previous patch. The cost of a merge is calculated at the time of issue and force-advances vtime into the future. Until global vtime catches up, how the cgroup's hweight changes in the meantime doesn't matter and it often leads to situations where the cost is calculated at one hweight and paid at a very different one. See the previous patch for more details.

Fix it by never advancing vtime into the future for merges. If budget is available, vtime is advanced. Otherwise, the cost is charged as debt.

This brings merge cost handling in line with issue cost handling in ioc_rqos_throttle().

---
 block/blk-iocost.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)
block/blk-iocost.c +18 -7
index 5b0c024ee5dd..6000ce9b10bb 100644
@@ -1784,28 +1784,39 @@ static void ioc_rqos_merge(struct rq_qos *rqos, struct request *rq,
 			   struct bio *bio)
 {
 	struct ioc_gq *iocg = blkg_to_iocg(bio->bi_blkg);
+	struct ioc *ioc = iocg->ioc;
 	sector_t bio_end = bio_end_sector(bio);
+	struct ioc_now now;
 	u32 hw_inuse;
 	u64 abs_cost, cost;
 
-	/* add iff the existing request has cost assigned */
-	if (!rq->bio || !rq->bio->bi_iocost_cost)
+	/* bypass if disabled or for root cgroup */
+	if (!ioc->enabled || !iocg->level)
 		return;
 
 	abs_cost = calc_vtime_cost(bio, iocg, true);
 	if (!abs_cost)
 		return;
 
+	ioc_now(ioc, &now);
+	current_hweight(iocg, NULL, &hw_inuse);
+	cost = abs_cost_to_cost(abs_cost, hw_inuse);
+
 	/* update cursor if backmerging into the request at the cursor */
 	if (blk_rq_pos(rq) < bio_end &&
 	    blk_rq_pos(rq) + blk_rq_sectors(rq) == iocg->cursor)
 		iocg->cursor = bio_end;
 
-	current_hweight(iocg, NULL, &hw_inuse);
-	cost = div64_u64(abs_cost * HWEIGHT_WHOLE, hw_inuse);
-	bio->bi_iocost_cost = cost;
-
-	atomic64_add(cost, &iocg->vtime);
+	/*
+	 * Charge if there's enough vtime budget and the existing request
+	 * has cost assigned.  Otherwise, account it as debt.  See debt
+	 * handling in ioc_rqos_throttle() for details.
+	 */
+	if (rq->bio && rq->bio->bi_iocost_cost &&
+	    time_before_eq64(atomic64_read(&iocg->vtime) + cost, now.vnow))
+		iocg_commit_bio(iocg, bio, cost);
+	else
+		atomic64_add(abs_cost, &iocg->abs_vdebt);
 }
 
 static void ioc_rqos_done_bio(struct rq_qos *rqos, struct bio *bio)
Signature · 1 line
2.17.1
author maintainer
#3 lore raw

PATCH 3/5 iocost_monitor: Always use strings for json values

In reply to Tejun Heo

Json has limited accuracy for numbers and can silently truncate 64bit values, which can be extremely confusing. Let's consistently use string encapsulated values for json output.

While at it, convert an unnecesary f-string to str().

---
 tools/cgroup/iocost_monitor.py | 40 +++++++++++++++++-----------------
 1 file changed, 20 insertions(+), 20 deletions(-)
tools/cgroup/iocost_monitor.py +20 -20
index 2c9445e966d8..8f6b4ac377bd 100644
@@ -111,14 +111,14 @@ autop_names = {
 
     def dict(self, now):
         return { 'device'               : devname,
-                 'timestamp'            : now,
-                 'enabled'              : self.enabled,
-                 'running'              : self.running,
-                 'period_ms'            : self.period_ms,
-                 'period_at'            : self.period_at,
-                 'period_vtime_at'      : self.vperiod_at,
-                 'busy_level'           : self.busy_level,
-                 'vrate_pct'            : self.vrate_pct, }
+                 'timestamp'            : str(now),
+                 'enabled'              : str(int(self.enabled)),
+                 'running'              : str(int(self.running)),
+                 'period_ms'            : str(self.period_ms),
+                 'period_at'            : str(self.period_at),
+                 'period_vtime_at'      : str(self.vperiod_at),
+                 'busy_level'           : str(self.busy_level),
+                 'vrate_pct'            : str(self.vrate_pct), }
 
     def table_preamble_str(self):
         state = ('RUN' if self.running else 'IDLE') if self.enabled else 'OFF'
@@ -171,19 +171,19 @@ autop_names = {
 
     def dict(self, now, path):
         out = { 'cgroup'                : path,
-                'timestamp'             : now,
-                'is_active'             : self.is_active,
-                'weight'                : self.weight,
-                'weight_active'         : self.active,
-                'weight_inuse'          : self.inuse,
-                'hweight_active_pct'    : self.hwa_pct,
-                'hweight_inuse_pct'     : self.hwi_pct,
-                'inflight_pct'          : self.inflight_pct,
-                'use_delay'             : self.use_delay,
-                'delay_ms'              : self.delay_ms,
-                'usage_pct'             : self.usage }
+                'timestamp'             : str(now),
+                'is_active'             : str(int(self.is_active)),
+                'weight'                : str(self.weight),
+                'weight_active'         : str(self.active),
+                'weight_inuse'          : str(self.inuse),
+                'hweight_active_pct'    : str(self.hwa_pct),
+                'hweight_inuse_pct'     : str(self.hwi_pct),
+                'inflight_pct'          : str(self.inflight_pct),
+                'use_delay'             : str(self.use_delay),
+                'delay_ms'              : str(self.delay_ms),
+                'usage_pct'             : str(self.usage) }
         for i in range(len(self.usages)):
-            out[f'usage_pct_{i}'] = f'{self.usages[i]}'
+            out[f'usage_pct_{i}'] = str(self.usages[i])
         return out
 
     def table_row_str(self, path):
Signature · 1 line
2.17.1
author maintainer
#4 lore raw

PATCH 4/5 iocost_monitor: Report more info with higher accuracy

In reply to Tejun Heo

When outputting json:

* Don't truncate numbers.

* Report address of iocg to ease drilling down further.

When outputting table:

* Use math.ceil() for delay_ms so that small delays don't read as 0.

---
 tools/cgroup/iocost_monitor.py | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)
tools/cgroup/iocost_monitor.py +11 -7
index 8f6b4ac377bd..5d8bac603ffa 100644
@@ -13,6 +13,7 @@ import sys
 import re
 import time
 import json
+import math
 
 import drgn
 from drgn import container_of
@@ -95,7 +96,7 @@ autop_names = {
 
         self.enabled = ioc.enabled.value_()
         self.running = ioc.running.value_() == IOC_RUNNING
-        self.period_ms = round(ioc.period_us.value_() / 1_000)
+        self.period_ms = ioc.period_us.value_() / 1_000
         self.period_at = ioc.period_at.value_() / 1_000_000
         self.vperiod_at = ioc.period_at_vtime.value_() / VTIME_PER_SEC
         self.vrate_pct = ioc.vtime_rate.counter.value_() * 100 / VTIME_PER_USEC
@@ -147,6 +148,7 @@ autop_names = {
         self.inuse = iocg.inuse.value_()
         self.hwa_pct = iocg.hweight_active.value_() * 100 / HWEIGHT_WHOLE
         self.hwi_pct = iocg.hweight_inuse.value_() * 100 / HWEIGHT_WHOLE
+        self.address = iocg.value_()
 
         vdone = iocg.done_vtime.counter.value_()
         vtime = iocg.vtime.counter.value_()
@@ -157,15 +159,15 @@ autop_names = {
         else:
             self.inflight_pct = 0
 
-        self.use_delay = min(blkg.use_delay.counter.value_(), 99)
-        self.delay_ms = min(round(blkg.delay_nsec.counter.value_() / 1_000_000), 999)
+        self.use_delay = blkg.use_delay.counter.value_()
+        self.delay_ms = blkg.delay_nsec.counter.value_() / 1_000_000
 
         usage_idx = iocg.usage_idx.value_()
         self.usages = []
         self.usage = 0
         for i in range(NR_USAGE_SLOTS):
             usage = iocg.usages[(usage_idx + i) % NR_USAGE_SLOTS].value_()
-            upct = min(usage * 100 / HWEIGHT_WHOLE, 999)
+            upct = usage * 100 / HWEIGHT_WHOLE
             self.usages.append(upct)
             self.usage = max(self.usage, upct)
 
@@ -181,7 +183,8 @@ autop_names = {
                 'inflight_pct'          : str(self.inflight_pct),
                 'use_delay'             : str(self.use_delay),
                 'delay_ms'              : str(self.delay_ms),
-                'usage_pct'             : str(self.usage) }
+                'usage_pct'             : str(self.usage),
+                'address'               : str(hex(self.address)) }
         for i in range(len(self.usages)):
             out[f'usage_pct_{i}'] = str(self.usages[i])
         return out
@@ -192,9 +195,10 @@ autop_names = {
               f'{self.inuse:5}/{self.active:5} ' \
               f'{self.hwi_pct:6.2f}/{self.hwa_pct:6.2f} ' \
               f'{self.inflight_pct:6.2f} ' \
-              f'{self.use_delay:2}*{self.delay_ms:03} '
+              f'{min(self.use_delay, 99):2}*'\
+              f'{min(math.ceil(self.delay_ms), 999):03} '
         for u in self.usages:
-            out += f'{round(u):03d}:'
+            out += f'{min(round(u), 999):03d}:'
         out = out.rstrip(':')
         return out
 
Signature · 1 line
2.17.1
author maintainer
#5 lore raw

PATCH 5/5 iocost_monitor: Report debt

In reply to Tejun Heo

Report debt and rename del_ms row to delay for consistency.

---
 block/blk-iocost.c             | 6 +++---
 tools/cgroup/iocost_monitor.py | 5 ++++-
 2 files changed, 7 insertions(+), 4 deletions(-)
block/blk-iocost.c +3 -3
index 6000ce9b10bb..f0c5bfd4b4a8 100644
@@ -161,9 +161,9 @@
  * https://github.com/osandov/drgn.  The ouput looks like the following.
  *
  *  sdb RUN   per=300ms cur_per=234.218:v203.695 busy= +1 vrate= 62.12%
- *                 active      weight      hweight% inflt% del_ms usages%
- *  test/a              *    50/   50  33.33/ 33.33  27.65  0*041 033:033:033
- *  test/b              *   100/  100  66.67/ 66.67  17.56  0*000 066:079:077
+ *                 active      weight      hweight% inflt% dbt  delay usages%
+ *  test/a              *    50/   50  33.33/ 33.33  27.65   2  0*041 033:033:033
+ *  test/b              *   100/  100  66.67/ 66.67  17.56   0  0*000 066:079:077
  *
  * - per	: Timer period
  * - cur_per	: Internal wall and device vtime clock
tools/cgroup/iocost_monitor.py +4 -1
index 5d8bac603ffa..f79b23582a1d 100644
@@ -135,7 +135,7 @@ autop_names = {
 
     def table_header_str(self):
         return f'{"":25} active {"weight":>9} {"hweight%":>13} {"inflt%":>6} ' \
-               f'{"del_ms":>6} {"usages%"}'
+               f'{"dbt":>3} {"delay":>6} {"usages%"}'
 
 class IocgStat:
     def __init__(self, iocg):
@@ -159,6 +159,7 @@ autop_names = {
         else:
             self.inflight_pct = 0
 
+        self.debt_ms = iocg.abs_vdebt.counter.value_() / VTIME_PER_USEC / 1000
         self.use_delay = blkg.use_delay.counter.value_()
         self.delay_ms = blkg.delay_nsec.counter.value_() / 1_000_000
 
@@ -181,6 +182,7 @@ autop_names = {
                 'hweight_active_pct'    : str(self.hwa_pct),
                 'hweight_inuse_pct'     : str(self.hwi_pct),
                 'inflight_pct'          : str(self.inflight_pct),
+                'debt_ms'               : str(self.debt_ms),
                 'use_delay'             : str(self.use_delay),
                 'delay_ms'              : str(self.delay_ms),
                 'usage_pct'             : str(self.usage),
@@ -195,6 +197,7 @@ autop_names = {
               f'{self.inuse:5}/{self.active:5} ' \
               f'{self.hwi_pct:6.2f}/{self.hwa_pct:6.2f} ' \
               f'{self.inflight_pct:6.2f} ' \
+              f'{min(math.ceil(self.debt_ms), 999):3} ' \
               f'{min(self.use_delay, 99):2}*'\
               f'{min(math.ceil(self.delay_ms), 999):03} '
         for u in self.usages:
Signature · 1 line
2.17.1
maintainer Applied
#6 lore raw
In reply to Tejun Heo
Quoted 36 lines · Tejun Heo

Currently, when a given cgroup doesn't have enough budget, a forced or merged bio will advance the cgroup's vtime by the cost calculated according to the hierarchical weight at the time of issue. Once vtime is advanced, how the cgroup's weight changes doesn't matter. It has to wait until global vtime catches up with the cgroup's.

This means that the cost is calculated based on the hweight at the time of issuing but may later be paid at the wrong hweight. This, for example, can lead to a scenario like the following.

1. A cgroup with a very low hweight runs out of budget.

2. A storm of swap-out happens on it. All of them are scaled according to the current low hweight and charged to vtime pushing it to a far future.

3. All other cgroups go idle and now the above cgroup has access to the whole device. However, because vtime is already wound using the past low hweight, what its current hweight is doesn't matter until global vtime catches up to the local vtime.

4. As a result, either vrate gets ramped up extremely or the IOs stall while the underlying device is idle.

This patchset fixes the behavior by accounting the cost of forced or merged bios in absolute vtime rather than cgroup-relative. This allows the cgroup to pay back the debt with whatever actual budget it has each period removing the hweight discrepancy.

Note that !forced bios' costs are already accounted in absolute vtime. This patchset puts forced charges on the same ground.

This patchset contains the following five patches and is on top of the current linux-block.git for-next 35e7ae82f62b ("Merge branch 'for-5.4/block' into for-next").

Quoted 8 lines

0001-blk-iocost-Account-force-charged-overage-in-absolute.patch 0002-blk-iocost-Don-t-let-merges-push-vtime-into-the-futu.patch 0003-iocost_monitor-Always-use-strings-for-json-values.patch 0004-iocost_monitor-Report-more-info-with-higher-accuracy.patch 0005-iocost_monitor-Report-debt.patch

0001-0002 implement absolute debt handling. 0003-0005 improve the monitoring script and add debt reporting.

Applied, thanks.

Signature · 1 line
Jens Axboe