PCI: tegra: Enable PCIe C5 controller of Tegra194 in p2972-0000 platform
Subsystems (5)
v4 cover PCI: tegra: Enable PCIe C5 controller of Tegra194 in p2972-0000 platform
This patch series enables Tegra194's C5 controller which owns x16 slot in p2972-0000 platform. C5 controller's PERST# and CLKREQ# are not configured as output and bi-directional signals by default and hence they need to be configured explicitly. Also, x16 slot's 3.3V and 12V supplies are controlled through GPIOs and hence they need to be enabled through regulator framework. This patch series adds required infrastructural support to address both the aforementioned requirements.
Testing done on p2972-0000 platform
- Able to enumerate devices connected to x16 slot (owned by C5 controller)
- Enumerated device's functionality verified
- Suspend-Resume sequence is verified with device connected to x16 slot
V4:
* Rebased (Patch-4/6 particularly) on top of Lorenzo's pci/tegra branch
V3:
* Addressed some more review comments from Andrew Murray and Thierry Reding
V2:
* Changed the order of patches in the series for easy merging
* Addressed review comments from Thierry Reding and Andrew Murray
Vidya Sagar (6):
dt-bindings: PCI: tegra: Add sideband pins configuration entries
dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries
PCI: tegra: Add support to configure sideband pins
PCI: tegra: Add support to enable slot regulators
arm64: tegra: Add configuration for PCIe C5 sideband signals
arm64: tegra: Add PCIe slot supply information in p2972-0000 platform
.../bindings/pci/nvidia,tegra194-pcie.txt | 16 ++++ .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 24 +++++ .../boot/dts/nvidia/tegra194-p2972-0000.dts | 4 +- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 38 +++++++- drivers/pci/controller/dwc/pcie-tegra194.c | 94 ++++++++++++++++++- 5 files changed, 172 insertions(+), 4 deletions(-)
Signature · 1 line
2.17.1
PATCH v4 1/6 dt-bindings: PCI: tegra: Add sideband pins configuration entries
Add optional bindings "pinctrl-names" and "pinctrl-0" to describe pin configuration information of a particular PCIe controller.
---
V4:
* None
V3:
* None
V2:
* None
.../devicetree/bindings/pci/nvidia,tegra194-pcie.txt | 8 ++++++++ 1 file changed, 8 insertions(+)
Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt +8 -0
@@ -83,6 +83,11 @@ Required properties: - vddio-pex-ctl-supply: Regulator supply for PCIe side band signals Optional properties: +- pinctrl-names: A list of pinctrl state names. + It is mandatory for C5 controller and optional for other controllers. + - "default": Configures PCIe I/O for proper operation. +- pinctrl-0: phandle for the 'default' state of pin configuration. + It is mandatory for C5 controller and optional for other controllers. - supports-clkreq: Refer to Documentation/devicetree/bindings/pci/pci.txt - nvidia,update-fc-fixup: This is a boolean property and needs to be present to improve performance when a platform is designed in such a way that it
@@ -120,6 +125,9 @@ Tegra194: num-lanes = <8>; linux,pci-domain = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>; + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>; clock-names = "core";
Signature · 1 line
2.17.1
PATCH v4 2/6 dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries
In reply to Vidya SagarAdd optional bindings "vpcie3v3-supply" and "vpcie12v-supply" to describe regulators of a PCIe slot's supplies 3.3V and 12V provided the platform is designed to have regulator controlled slot supplies.
---
V4:
* None
V3:
* None
V2:
* None
.../devicetree/bindings/pci/nvidia,tegra194-pcie.txt | 8 ++++++++ 1 file changed, 8 insertions(+)
Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt +8 -0
@@ -104,6 +104,12 @@ Optional properties: specified in microseconds - nvidia,aspm-l0s-entrance-latency-us: ASPM L0s entrance latency to be specified in microseconds +- vpcie3v3-supply: A phandle to the regulator node that supplies 3.3V to the slot + if the platform has one such slot. (Ex:- x16 slot owned by C5 controller + in p2972-0000 platform). +- vpcie12v-supply: A phandle to the regulator node that supplies 12V to the slot + if the platform has one such slot. (Ex:- x16 slot owned by C5 controller + in p2972-0000 platform). Examples: =========
@@ -156,6 +162,8 @@ Tegra194: 0xc2000000 0x18 0x00000000 0x18 0x00000000 0x4 0x00000000>; /* prefetchable memory (16GB) */ vddio-pex-ctl-supply = <&vdd_1v8ao>; + vpcie3v3-supply = <&vdd_3v3_pcie>; + vpcie12v-supply = <&vdd_12v_pcie>; phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>, <&p2u_hsio_5>;
Signature · 1 line
2.17.1
PATCH v4 3/6 PCI: tegra: Add support to configure sideband pins
In reply to Vidya SagarAdd support to configure sideband signal pins when information is present in respective controller's device-tree node.
---
V4:
* None
V3:
* Used 'dev' instead of 'pcie->dev'
V2:
* Addressed review comment from Andrew Murray
* Handled failure case of pinctrl_pm_select_default_state() cleanly
drivers/pci/controller/dwc/pcie-tegra194.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
drivers/pci/controller/dwc/pcie-tegra194.c +9 -2
@@ -1304,8 +1304,13 @@ static int tegra_pcie_config_rp(struct tegra_pcie_dw *pcie)if (ret <0 ) {dev_err (dev,"Failed to get runtime sync for PCIe dev: %d\n" , ret); -pm_runtime_disable (dev); -return ret; + goto fail_pm_get_sync; + } + + ret =pinctrl_pm_select_default_state (dev); +if (ret <0 ) { +dev_err (dev,"Failed to configure sideband pins: %d\n" , ret); + goto fail_pinctrl; }tegra_pcie_init_controller (pcie);
@@ -1332,7 +1337,9 @@ static int tegra_pcie_config_rp(struct tegra_pcie_dw *pcie) fail_host_init:tegra_pcie_deinit_controller (pcie); +fail_pinctrl:pm_runtime_put_sync (dev); +fail_pm_get_sync:pm_runtime_disable (dev);return ret; }
Signature · 1 line
2.17.1
PATCH v4 4/6 PCI: tegra: Add support to enable slot regulators
In reply to Vidya SagarAdd support to get regulator information of 3.3V and 12V supplies of a PCIe slot from the respective controller's device-tree node and enable those supplies. This is required in platforms like p2972-0000 where the supplies to x16 slot owned by C5 controller need to be enabled before attempting to enumerate the devices.
---
V4:
* Rebased on top of Lorenzo's pci/tegra branch
V3:
* Added a dev_err() print for failure case of tegra_pcie_get_slot_regulators() API
* Modified to make 100ms sleep valid only if at least one of the regulator handles exist
V2:
* Addressed review comments from Thierry Reding and Andrew Murray
* Handled failure case of devm_regulator_get_optional() for -ENODEV cleanly
drivers/pci/controller/dwc/pcie-tegra194.c | 83 ++++++++++++++++++++++ 1 file changed, 83 insertions(+)
drivers/pci/controller/dwc/pcie-tegra194.c +83 -0
@@ -277,6 +277,8 @@ struct tegra_pcie_dw {u32 aspm_l0s_enter_lat;struct regulator *pex_ctl_supply; +struct regulator *slot_ctl_3v3; +struct regulator *slot_ctl_12v;unsigned int phy_count;struct phy **phys;
@@ -1047,6 +1049,73 @@ static void tegra_pcie_downstream_dev_to_D0(struct tegra_pcie_dw *pcie) } } +static int tegra_pcie_get_slot_regulators (struct tegra_pcie_dw *pcie) +{ + pcie->slot_ctl_3v3 =devm_regulator_get_optional (pcie->dev,"vpcie3v3" ); +if (IS_ERR (pcie->slot_ctl_3v3)) { +if (PTR_ERR (pcie->slot_ctl_3v3) != -ENODEV ) +return PTR_ERR (pcie->slot_ctl_3v3); + + pcie->slot_ctl_3v3 =NULL ; + } + + pcie->slot_ctl_12v =devm_regulator_get_optional (pcie->dev,"vpcie12v" ); +if (IS_ERR (pcie->slot_ctl_12v)) { +if (PTR_ERR (pcie->slot_ctl_12v) != -ENODEV ) +return PTR_ERR (pcie->slot_ctl_12v); + + pcie->slot_ctl_12v =NULL ; + } + +return 0 ; +} + +static int tegra_pcie_enable_slot_regulators (struct tegra_pcie_dw *pcie) +{ +int ret; + +if (pcie->slot_ctl_3v3) { + ret =regulator_enable (pcie->slot_ctl_3v3); +if (ret <0 ) { +dev_err (pcie->dev, +"Failed to enable 3.3V slot supply: %d\n" , ret); +return ret; + } + } + +if (pcie->slot_ctl_12v) { + ret =regulator_enable (pcie->slot_ctl_12v); +if (ret <0 ) { +dev_err (pcie->dev, +"Failed to enable 12V slot supply: %d\n" , ret); + goto fail_12v_enable; + } + } + +/* +* According to PCI Express Card Electromechanical Specification +* Revision 1.1, Table-2.4, T_PVPERL (Power stable to PERST# inactive) +* should be a minimum of 100ms. +*/ +if (pcie->slot_ctl_3v3 || pcie->slot_ctl_12v) +msleep (100 ); + +return 0 ; + +fail_12v_enable: +if (pcie->slot_ctl_3v3) +regulator_disable (pcie->slot_ctl_3v3); +return ret; +} + +static void tegra_pcie_disable_slot_regulators (struct tegra_pcie_dw *pcie) +{ +if (pcie->slot_ctl_12v) +regulator_disable (pcie->slot_ctl_12v); +if (pcie->slot_ctl_3v3) +regulator_disable (pcie->slot_ctl_3v3); +} +static int tegra_pcie_config_controller (struct tegra_pcie_dw *pcie,bool en_hw_hot_rst) {
@@ -1060,6 +1129,10 @@ static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie,return ret; } + ret =tegra_pcie_enable_slot_regulators (pcie); +if (ret <0 ) + goto fail_slot_reg_en; + ret =regulator_enable (pcie->pex_ctl_supply);if (ret <0 ) {dev_err (pcie->dev,"Failed to enable regulator: %d\n" , ret);
@@ -1142,6 +1215,8 @@ static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie, fail_core_clk:regulator_disable (pcie->pex_ctl_supply); fail_reg_en: +tegra_pcie_disable_slot_regulators (pcie); +fail_slot_reg_en:tegra_pcie_bpmp_set_ctrl_state (pcie, false);return ret;
@@ -1174,6 +1249,8 @@ static int __deinit_controller(struct tegra_pcie_dw *pcie)return ret; } +tegra_pcie_disable_slot_regulators (pcie); + ret =tegra_pcie_bpmp_set_ctrl_state (pcie, false);if (ret) { dev_err(pcie->dev, "Failed to disable controller %d: %d\n",
@@ -1373,6 +1450,12 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev)return ret; } + ret =tegra_pcie_get_slot_regulators (pcie); +if (ret <0 ) { +dev_err (dev,"Failed to get slot regulators: %d\n" , ret); +return ret; + } + pcie->pex_ctl_supply =devm_regulator_get (dev,"vddio-pex-ctl" );if (IS_ERR (pcie->pex_ctl_supply)) { ret =PTR_ERR (pcie->pex_ctl_supply);
Signature · 1 line
2.17.1
PATCH v4 5/6 arm64: tegra: Add configuration for PCIe C5 sideband signals
In reply to Vidya SagarAdd support to configure PCIe C5's sideband signals PERST# and CLKREQ# as output and bi-directional signals respectively which unlike other PCIe controllers sideband signals are not configured by default.
---
V4:
* None
V3:
* None
V2:
* None
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 38 +++++++++++++++++++++++- 1 file changed, 37 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/nvidia/tegra194.dtsi +37 -1
@@ -3,8 +3,9 @@ #include <dt-bindings/gpio/tegra194-gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/tegra186-hsp.h> -#include <dt-bindings/reset/tegra194-reset.h> +#include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/power/tegra194-powergate.h> +#include <dt-bindings/reset/tegra194-reset.h> #include <dt-bindings/thermal/tegra194-bpmp-thermal.h> / {
@@ -130,6 +131,38 @@ }; }; + pinmux: pinmux@2430000 { + compatible = "nvidia,tegra194-pinmux"; + reg = <0x2430000 0x17000 + 0xc300000 0x4000>; + + status = "okay"; + + pex_rst_c5_out_state: pex_rst_c5_out { + pex_rst { + nvidia,pins = "pex_l5_rst_n_pgg1"; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,lpdr = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + }; + }; + + clkreq_c5_bi_dir_state: clkreq_c5_bi_dir { + clkreq { + nvidia,pins = "pex_l5_clkreq_n_pgg0"; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,lpdr = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + }; + }; + }; + uarta: serial@3100000 { compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; reg = <0x03100000 0x40>;
@@ -1365,6 +1398,9 @@ num-viewport = <8>; linux,pci-domain = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>; + clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>, <&bpmp TEGRA194_CLK_PEX1_CORE_5M>; clock-names = "core", "core_m";
Signature · 1 line
2.17.1
PATCH v4 6/6 arm64: tegra: Add PCIe slot supply information in p2972-0000 platform
In reply to Vidya SagarAdd 3.3V and 12V supplies regulators information of x16 PCIe slot in p2972-0000 platform which is owned by C5 controller and also enable C5 controller.
---
V4:
* None
V3:
* None
V2:
* None
.../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 24 +++++++++++++++++++ .../boot/dts/nvidia/tegra194-p2972-0000.dts | 4 +++- 2 files changed, 27 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +24 -0
@@ -289,5 +289,29 @@ gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>; enable-active-high; }; + + vdd_3v3_pcie: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + + regulator-name = "PEX_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + enable-active-high; + }; + + vdd_12v_pcie: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + + regulator-name = "VDD_12V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>; + regulator-boot-on; + enable-active-low; + }; }; };
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +3 -1
@@ -93,9 +93,11 @@ }; pcie@141a0000 { - status = "disabled"; + status = "okay"; vddio-pex-ctl-supply = <&vdd_1v8ao>; + vpcie3v3-supply = <&vdd_3v3_pcie>; + vpcie12v-supply = <&vdd_12v_pcie>; phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
Signature · 1 line
2.17.1
Lorenzo Pieralisi
AppliedQuoted 30 lines · Vidya Sagar
This patch series enables Tegra194's C5 controller which owns x16 slot in p2972-0000 platform. C5 controller's PERST# and CLKREQ# are not configured as output and bi-directional signals by default and hence they need to be configured explicitly. Also, x16 slot's 3.3V and 12V supplies are controlled through GPIOs and hence they need to be enabled through regulator framework. This patch series adds required infrastructural support to address both the aforementioned requirements.
Testing done on p2972-0000 platform
- Able to enumerate devices connected to x16 slot (owned by C5 controller)
- Enumerated device's functionality verified
- Suspend-Resume sequence is verified with device connected to x16 slotV4:
* Rebased (Patch-4/6 particularly) on top of Lorenzo's pci/tegra branchV3:
* Addressed some more review comments from Andrew Murray and Thierry RedingV2:
* Changed the order of patches in the series for easy merging
* Addressed review comments from Thierry Reding and Andrew MurrayVidya Sagar (6):
dt-bindings: PCI: tegra: Add sideband pins configuration entries
dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries
PCI: tegra: Add support to configure sideband pins
PCI: tegra: Add support to enable slot regulators
arm64: tegra: Add configuration for PCIe C5 sideband signals
arm64: tegra: Add PCIe slot supply information in p2972-0000 platform
Quoted 6 lines
.../bindings/pci/nvidia,tegra194-pcie.txt | 16 ++++ .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 24 +++++ .../boot/dts/nvidia/tegra194-p2972-0000.dts | 4 +- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 38 +++++++- drivers/pci/controller/dwc/pcie-tegra194.c | 94 ++++++++++++++++++- 5 files changed, 172 insertions(+), 4 deletions(-)
Applied to pci/tegra for v5.4, thanks.
Lorenzo