Add lease testing
v2 cover Add lease testing
From: Ira Weiny <[email protected]>
To get to a point of developing and testing the new Lease semantics for long term file pins[1], add a simple lease test.
Currently the following tests are performed based on the fcntl() man page.
/* 1 */"Take Read Lease",
/* 2 */"Take Write Lease",
/* 3 */"Fail Write Lease if file is open somewhere else",
/* 4 */"Fail Read Lease if opened with write permissions",
/* 5 */"Read lease gets SIGIO on write open",
/* 6 */"Write lease gets SIGIO on read open",
/* 7 */"No SIGIO is sent with read lock on read open",
/* 8 */"Read lease gets SIGIO on write open",[1] https://lkml.org/lkml/2019/8/14/435
Ira Weiny (2):
src/leasetest: Add lease test executable
generic: Add Lease testing
src/Makefile | 2 +- src/leasetest.c | 859 ++++++++++++++++++++++++++++++++++++++++++ tests/generic/567 | 100 +++++ tests/generic/567.out | 2 + tests/generic/group | 1 + 5 files changed, 963 insertions(+), 1 deletion(-) create mode 100644 src/leasetest.c create mode 100755 tests/generic/567 create mode 100644 tests/generic/567.out
Signature · 1 line
2.20.1
PATCH v2 1/2 src/leasetest: Add lease test executable
From: Ira Weiny <[email protected]>
locktest uses a pattern which is suitable for lease testing so this patch copies locktest as a framework and modifies it for lease testing.
Initial tests are built based on the existing fcntl() man page declared functionality.
---
Changes:
Adds tests which were covered here: https://marc.info/?l=fstests&m=156690934513424&w=2
src/Makefile | 2 +- src/leasetest.c | 859 ++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 860 insertions(+), 1 deletion(-) create mode 100644 src/leasetest.c
src/Makefile +1 -1
@@ -28,7 +28,7 @@ LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \ attr-list-by-handle-cursor-test listxattr dio-interleaved t_dir_type \ dio-invalidate-cache stat_test t_encrypted_d_revalidate \ attr_replace_test swapon mkswap t_attr_corruption t_open_tmpfiles \ - fscrypt-crypt-util bulkstat_null_ocount + fscrypt-crypt-util bulkstat_null_ocount leasetest SUBDIRS = log-writes perf
src/leasetest.c new file +859 -0
859 lines not on this page · raw message
Signature · 1 line
2.20.1
Re: [PATCH V2 1/2] src/leasetest: Add lease test executable
Quoted 4 lines · On Thu, Sep 05, 2019 at 10:30:25AM -0700, [email protected] wrote:
From: Ira Weiny <[email protected]>
locktest uses a pattern which is suitable for lease testing so this patch copies locktest as a framework and modifies it for lease testing.
Looks like most of the framework is duplicated and only the test cases are updated to test file lease. I'd like to extend locktest.c to test file lease as well, e.g. using the expected 'tests' array to test lock or lease based on the given option.
Thanks,
Eryu
Quoted 898 lines
Initial tests are built based on the existing
fcntl()man page declared functionality.Acked-by Jeff Layton <[email protected]>Signed-off-by Ira Weiny <[email protected]>---
Changes:Adds tests which were covered here: https://marc.info/?l=fstests&m=156690934513424&w=2src/Makefile | 2 +- src/leasetest.c | 859 ++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 860 insertions(+), 1 deletion(-) create mode 100644 src/leasetest.csrc/Makefile +1
-1@@ -28,7 +28,7 @@ LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \ attr-list-by-handle-cursor-test listxattr dio-interleaved t_dir_type \ dio-invalidate-cache stat_test t_encrypted_d_revalidate \ attr_replace_test swapon mkswap t_attr_corruption t_open_tmpfiles \ - fscrypt-crypt-util bulkstat_null_ocount + fscrypt-crypt-util bulkstat_null_ocount leasetest SUBDIRS = log-writes perfsrc/leasetest.c new file +859
-0@@ -0,0 +1,859 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (c) 2000-2003 Silicon Graphics, Inc. +* Copyright (c) 2019 Intel Corp. +* All Rights Reserved. +*/ + +/* +* Synchronized lease exerciser +*/ + +#include <stdio.h> +#include <stdlib.h> +#include <malloc.h> +#include <fcntl.h> +#include <errno.h> +#include <string.h> +#include <sys/stat.h> +#include <sys/socket.h> +#include <netinet/in.h> +#include <netinet/tcp.h> + +#include <unistd.h> +#include <sys/types.h> +#include <netdb.h> +#include <endian.h> +#include <byteswap.h> +#include <errno.h> +#include <string.h> +#include <signal.h> + +#define HEX_2_ASC (x) ((x) > 9) ? (x)-10+'a' : (x)+'0' +#define FILE_SIZE 1024 +#define PLATFORM_INIT ()/*no-op*/ +#define PLATFORM_CLEANUP ()/*no-op*/ +#define LL "ll" + +extern int h_errno; + +#define inet_aton (STRING ,INADDRP ) \ + (((INADDRP)->s_addr = inet_addr(STRING)) == -1 ? 0 : 1) + +/* this assumes 32 bit pointers */ +#define PTR_TO_U64 (P ) ((unsigned __int64)(unsigned int)(P)) +#define U64_TO_PTR (T ,U ) ((T)(void *)(unsigned int)(U)) + +#if __BYTE_ORDER == __LITTLE_ENDIAN +#define bswap_uint16 (x) (uint16_t)bswap_16(x) +#define bswap_uint32 (x) (uint32_t)bswap_32(x) +#define bswap_uint64 (x) (uint64_t)bswap_64(x) +#else +#define bswap_uint16 (x) x +#define bswap_uint32 (x) x +#define bswap_uint64 (x) x +#endif + +#define SOCKET int +#define SOCKET_READ read +#define SOCKET_WRITE write +#define SOCKET_CLOSE (S ) (close(S)) +#define INVALID_SOCKET -1 + +#define O_BINARY 0 + +#define HANDLE int +#define INVALID_HANDLE -1 +#define SEEK (H ,O ) (lseek(H, O, SEEK_SET)) +#define READ (H ,B ,L ) (read(H, B, L)) +#define WRITE (H ,B ,L ) (write(H, B, L)) +#define CLOSE (H ) (close(H)) + +#define RAND () (rand()) +#define SRAND (s) (srand(s)) +#define SLEEP (s) (sleep(s)) + +#define MIN (A ,B ) (((A)<(B))?(A):(B)) +#define MAX (A ,B ) (((A)>(B))?(A):(B)) + +#define ALLOC_ALIGNED (S ) (memalign(65536, S)) +#define FREE_ALIGNED (P ) (free(P)) + +static char *prog; +static char *filename =0 ; +static int debug =0 ; +static int server =1 ; +static int port =0 ; +static int testnumber =-1 ; +static int saved_errno =0 ; +static int got_sigio =0 ; + +static SOCKET s_fd =-1 ;/* listen socket */ +static SOCKET c_fd =-1 ;/* IPC socket */ +static HANDLE f_fd =INVALID_HANDLE ;/* shared file */ + +#define CMD_SETLEASE 0 +#define CMD_GETLEASE 1 +#define CMD_CLOSE 2 +#define CMD_OPEN 3 +#define CMD_SIGIO 4 +#define CMD_WAIT_SIGIO 5 + +#define PASS 1 +#define FAIL 0 + +#define SERVER 0 +#define CLIENT 1 + +#define TEST_NUM 0 +#define COMMAND 1 +#define ARG 2 +#define FLAGS ARG/* Arg and flags are used the same */ +#define RESULT 3 +#define WHO 4 + +static char *get_cmd_str (int cmd) +{ +switch (cmd) { +case CMD_SETLEASE :return "Set Lease" ;break ; +case CMD_GETLEASE :return "Get Lease" ;break ; +case CMD_CLOSE :return "Close" ;break ; +case CMD_OPEN :return "Open" ;break ; + } +return "unknown" ; +} + +/* +* When adding tests be sure to add to both the descriptions AND tests array. +* Also, be sure to undo whatever is set for each test (eg unlock any locks) +* There is no need to have a matching client command for each server command +* (or vice versa) +*/ + +char *descriptions[] = { +/* 1 */ "Take Read Lease" , +/* 2 */ "Take Write Lease" , +/* 3 */ "Fail Write Lease if file is open somewhere else" , +/* 4 */ "Fail Read Lease if opened with write permissions" , +/* 5 */ "Read lease gets SIGIO on write open" , +/* 6 */ "Write lease gets SIGIO on read open" , +/* 7 */ "No SIGIO is sent with read lock on read open" , +/* 8 */ "Read lease gets SIGIO on write open" , +}; + +static int64_t tests[][5 ] = +/* test # Cmd Arg|Flags Result Server|Client */ + { +/* Various simple tests exercising the list */ + +/* SECTION 1: Simple verification of being able to take leases */ +/* Take Read Lease */ + {1 ,CMD_CLOSE ,0 ,PASS ,CLIENT }, + {1 ,CMD_OPEN ,O_RDONLY ,PASS ,CLIENT }, + {1 ,CMD_CLOSE ,0 ,PASS ,SERVER }, + {1 ,CMD_OPEN ,O_RDONLY ,PASS ,SERVER }, + {1 ,CMD_SETLEASE ,F_RDLCK ,PASS ,SERVER }, + {1 ,CMD_GETLEASE ,F_RDLCK ,PASS ,SERVER }, + {1 ,CMD_SETLEASE ,F_UNLCK ,PASS ,SERVER }, + {1 ,CMD_CLOSE ,0 ,PASS ,SERVER }, + {1 ,CMD_CLOSE ,0 ,PASS ,CLIENT }, +/* Take Write Lease */ + {2 ,CMD_OPEN ,O_RDWR ,PASS ,SERVER }, + {2 ,CMD_SETLEASE ,F_WRLCK ,PASS ,SERVER }, + {2 ,CMD_GETLEASE ,F_WRLCK ,PASS ,SERVER }, + {2 ,CMD_SETLEASE ,F_UNLCK ,PASS ,SERVER }, + {2 ,CMD_CLOSE ,0 ,PASS ,SERVER }, +/* Fail Write Lease with other users */ + {3 ,CMD_OPEN ,O_RDONLY ,PASS ,CLIENT }, + {3 ,CMD_OPEN ,O_RDWR ,PASS ,SERVER }, + {3 ,CMD_SETLEASE ,F_WRLCK ,FAIL ,SERVER }, + {3 ,CMD_GETLEASE ,F_WRLCK ,FAIL ,SERVER }, + {3 ,CMD_CLOSE ,0 ,PASS ,SERVER }, + {3 ,CMD_CLOSE ,0 ,PASS ,CLIENT }, +/* Fail Read Lease if opened for write */ + {4 ,CMD_OPEN ,O_RDWR ,PASS ,SERVER }, + {4 ,CMD_SETLEASE ,F_RDLCK ,FAIL ,SERVER }, + {4 ,CMD_GETLEASE ,F_RDLCK ,FAIL ,SERVER }, + {4 ,CMD_CLOSE ,0 ,PASS ,SERVER }, + +/* SECTION 2: Proper SIGIO notifications */ +/* Get SIGIO when read lease is broken by write */ + {5 ,CMD_OPEN ,O_RDONLY ,PASS ,CLIENT }, + {5 ,CMD_SETLEASE ,F_RDLCK ,PASS ,CLIENT }, + {5 ,CMD_GETLEASE ,F_RDLCK ,PASS ,CLIENT }, + {5 ,CMD_SIGIO ,0 ,PASS ,CLIENT }, + {5 ,CMD_OPEN ,O_RDWR ,PASS ,SERVER }, + {5 ,CMD_WAIT_SIGIO ,5 ,PASS ,CLIENT }, + {5 ,CMD_CLOSE ,0 ,PASS ,SERVER }, + {5 ,CMD_CLOSE ,0 ,PASS ,CLIENT }, + +/* Get SIGIO when write lease is broken by read */ + {6 ,CMD_OPEN ,O_RDWR ,PASS ,CLIENT }, + {6 ,CMD_SETLEASE ,F_WRLCK ,PASS ,CLIENT }, + {6 ,CMD_GETLEASE ,F_WRLCK ,PASS ,CLIENT }, + {6 ,CMD_SIGIO ,0 ,PASS ,CLIENT }, + {6 ,CMD_OPEN ,O_RDONLY ,PASS ,SERVER }, + {6 ,CMD_WAIT_SIGIO ,5 ,PASS ,CLIENT }, + {6 ,CMD_CLOSE ,0 ,PASS ,SERVER }, + {6 ,CMD_CLOSE ,0 ,PASS ,CLIENT }, + +/* Don't get SIGIO when read lease is taken by read */ + {7 ,CMD_OPEN ,O_RDONLY ,PASS ,CLIENT }, + {7 ,CMD_SETLEASE ,F_RDLCK ,PASS ,CLIENT }, + {7 ,CMD_GETLEASE ,F_RDLCK ,PASS ,CLIENT }, + {7 ,CMD_SIGIO ,0 ,PASS ,CLIENT }, + {7 ,CMD_OPEN ,O_RDONLY ,PASS ,SERVER }, + {7 ,CMD_WAIT_SIGIO ,5 ,FAIL ,CLIENT }, + {7 ,CMD_CLOSE ,0 ,PASS ,SERVER }, + {7 ,CMD_CLOSE ,0 ,PASS ,CLIENT }, + +/* Get SIGIO when Read lease is broken by Write */ + {8 ,CMD_OPEN ,O_RDONLY ,PASS ,CLIENT }, + {8 ,CMD_SETLEASE ,F_RDLCK ,PASS ,CLIENT }, + {8 ,CMD_GETLEASE ,F_RDLCK ,PASS ,CLIENT }, + {8 ,CMD_SIGIO ,0 ,PASS ,CLIENT }, + {8 ,CMD_OPEN ,O_RDWR ,PASS ,SERVER }, + {8 ,CMD_WAIT_SIGIO ,5 ,PASS ,CLIENT }, + {8 ,CMD_CLOSE ,0 ,PASS ,SERVER }, + {8 ,CMD_CLOSE ,0 ,PASS ,CLIENT }, + +/* indicate end of array */ +/* Must have an end for the SERVER and one for the CLIENT */ + {0 ,0 ,0 ,0 ,SERVER }, + {0 ,0 ,0 ,0 ,CLIENT } + }; + +static struct { +int32_t index; +int32_t test; +int32_t command; +int32_t arg; +int32_t result; +int32_t error; +} ctl; + + +void +usage (void ) +{ +fprintf (stderr,"Usage: %s [options] sharedfile\n\ +\n\ +options:\n\ +-p port TCP/IP port number for client-server communication\n\ +-d enable debug tracing\n\ +-n # test number to run\n\ +-h host run as client and connect to server on remote host\n\ +[default run as server]\n" , prog); +exit (1 ); +} + +#define INIT_BUFSZ 512 + +void +initialize (HANDLE fd) +{ +char * ibuf; +int j=0 ; +int nwrite; +int offset =0 ; +int togo =FILE_SIZE ; + + ibuf = (char *)malloc (INIT_BUFSZ ); +memset (ibuf,':' ,INIT_BUFSZ ); + +SEEK (fd,0L ); +while (togo) { + offset+=j; + j = togo >INIT_BUFSZ ?INIT_BUFSZ : togo; + +if ((nwrite =WRITE (fd, ibuf, j)) != j) { +if (nwrite <0 ) +perror ("initialize write:" ); +else +fprintf (stderr,"initialize: write() returns %d, not %d as expected\n" , + nwrite, j); +exit (1 ); +/*NOTREACHED*/ + } + togo -= j; + } +} + +void release_lease (int fd) +{ +int rc; + + rc =fcntl (fd,F_SETLEASE ,F_UNLCK ); +if (debug && rc !=0 ) { +fprintf (stderr,"Failed to remove lease %d : %d %s\n" , + rc, errno,strerror (errno)); + } +} + +void lease_break (int sig,siginfo_t *info,void *p) +{ +if (debug >1 ) { +fprintf (stderr,"lease break %d %p fd %d\n" , + sig, info, info->si_fd); + } + got_sigio =1 ; +release_lease (f_fd); +} + +struct sigaction lease_break_action = { + .sa_sigaction = lease_break, + .sa_flags =SA_SIGINFO , +}; + +int do_setup_sigio (int fd) +{ +int rc; + + got_sigio =0 ; + + rc =sigaction (SIGIO , &lease_break_action,NULL ); +if (rc !=0 ) +return FAIL ; + +if (debug) { +fprintf (stderr,"Set '%s' sigaction on %d\n" , +strsignal (SIGIO ), fd); + } + + rc =fcntl (fd,F_SETSIG ,SIGIO ); + +return (rc ==0 ?PASS :FAIL ); +} + +int do_wait_sigio (int32_t time) +{ +if (time <=0 ) +return FAIL ; + +while (!got_sigio && time--) { +sleep (1 ); + } + +return (got_sigio ?PASS :FAIL ); +} + +int do_open (int flag) +{ +int flags = flag|O_CREAT |O_BINARY ; + +if (debug >1 ) { +fprintf (stderr,"do_open %s 0x%x\n" , filename, flags); + } + +if ((f_fd =open (filename, flags,0666 )) ==INVALID_HANDLE ) { +perror ("shared file create" ); +return FAIL ; +/*NOTREACHED*/ + } +return PASS ; +} + +static int do_lease (int cmd,int arg,int expected) +{ +int ret; + +if (debug >1 ) { +fprintf (stderr,"do_lease: cmd=%d arg=%d exp=%X\n" , + cmd, arg, expected); + } + +if (f_fd <0 ) +return f_fd; + + errno =0 ; + + ret =fcntl (f_fd, cmd, arg); + saved_errno = errno; + +if (expected && (expected == ret)) + ret =0 ; + +if (debug >1 && ret) +fprintf (stderr,"do_lease: ret = %d, errno = %d (%s)\n" , + ret, errno,strerror (errno)); + +return (ret==0 ?PASS :FAIL ); +} + +int do_close (void ) +{ +if (debug >1 ) { +fprintf (stderr,"do_close\n" ); + } + + errno =0 ; +CLOSE (f_fd); + f_fd =INVALID_HANDLE ; + + saved_errno = errno; + +if (errno) +return FAIL ; +return PASS ; +} + +static void init_ctl (int32_t index) +{ + ctl.test= (int32_t )tests[index][TEST_NUM ]; + ctl.command = (int32_t )tests[index][COMMAND ]; + ctl.arg = (int32_t )tests[index][ARG ]; + ctl.index = index; + ctl.result = (int32_t )tests[index][RESULT ]; + ctl.error =0 ; +} + +void +send_ctl (void ) +{ +int nwrite; + +if (debug >1 ) { +fprintf (stderr,"send_ctl: test=%d, cmd=%d, arg=%d, index=%d, result=%d, error=%d\n" , + ctl.test, ctl.command, ctl.arg, ctl.index, ctl.result, ctl.error); + } + + ctl.test=bswap_uint32 (ctl.test); + ctl.command =bswap_uint32 (ctl.command); + ctl.arg =bswap_uint32 (ctl.arg); + ctl.index =bswap_uint32 (ctl.index); + ctl.result =bswap_uint32 (ctl.result); + ctl.error =bswap_uint32 (ctl.error); + nwrite =SOCKET_WRITE (c_fd, (char *)&ctl,sizeof (ctl)); + + ctl.test=bswap_uint32 (ctl.test); + ctl.command =bswap_uint32 (ctl.command); + ctl.arg =bswap_uint32 (ctl.arg); + ctl.index=bswap_uint32 (ctl.index); + ctl.result =bswap_uint32 (ctl.result); + ctl.error=bswap_uint32 (ctl.error); +if (nwrite !=sizeof (ctl)) { +if (nwrite <0 ) +perror ("send_ctl: write" ); +else +fprintf (stderr,"send_ctl[%d]: write() returns %d, not %zu as expected\n" , + ctl.test, nwrite,sizeof (ctl)); +exit (1 ); +/*NOTREACHED*/ + } +} + +void recv_ctl (void ) +{ +int nread; + +again: +if ((nread =SOCKET_READ (c_fd, (char *)&ctl,sizeof (ctl))) !=sizeof (ctl)) { +if (nread <0 ) { +if (errno ==EINTR ) + goto again; +perror ("recv_ctl: read" ); + }else { +fprintf (stderr,"recv_ctl[%d]: read() returns %d, not %zu as expected\n" , + ctl.test, nread,sizeof (ctl)); +fprintf (stderr,"socket might has been closed by other leasetest\n" ); + } +exit (1 ); +/*NOTREACHED*/ + } + ctl.test=bswap_uint32 (ctl.test); + ctl.command =bswap_uint32 (ctl.command); + ctl.arg =bswap_uint32 (ctl.arg); + ctl.index=bswap_uint32 (ctl.index); + ctl.result =bswap_uint32 (ctl.result); + ctl.error=bswap_uint32 (ctl.error); + +if (debug >1 ) { +fprintf (stderr,"recv_ctl: test=%d, cmd=%d arg=%d, index=%d, result=%d, error=%d\n" , + ctl.test, ctl.command, ctl.arg, ctl.index, ctl.result, ctl.error); + } +} + +void +cleanup (void ) +{ +if (f_fd>=0 ) +CLOSE (f_fd); + +if (c_fd>=0 ) +SOCKET_CLOSE (c_fd); + +if (s_fd>=0 ) +SOCKET_CLOSE (s_fd); + +PLATFORM_CLEANUP (); +} + +int +main (int argc,char *argv[]) +{ +int i, sts; +int c; +struct sockaddr_in myAddr; +struct linger noLinger = {1 ,0 }; +char *host =NULL ; +char *endnum; +int errflag =0 ; +char *p; +extern char *optarg; +extern int optind; +int fail_count =0 ;; + +atexit (cleanup); + +PLATFORM_INIT (); + +/* trim command name of leading directory components */ + prog = argv[0 ]; +for (p = prog; *p; p++) { +if (*p =='/' ) + prog = p+1 ; + } + +while ((c =getopt (argc, argv,"dn:h:p:?" )) !=EOF ) { +switch (c) { + +case 'd' :/* debug flag */ + debug++; +break ; + +case 'h' :/* (server) hostname */ + server =0 ; + host = optarg; +break ; + +case 'n' : + testnumber =atoi (optarg); +break ; + +case 'p' :/* TCP/IP port */ + port = (int )strtol (optarg, &endnum,10 ); +if (*endnum !='\0' ) { +fprintf (stderr,"%s: -p argument must be a numeric\n" , + prog); +exit (1 ); +/*NOTREACHED*/ + } +break ; + +case '?' : +default : + errflag++; +break ; + } + } + +if (errflag || optind != argc-1 ) { +usage (); +/*NOTREACHED*/ + } + + filename=argv[optind]; +if (debug) +fprintf (stderr,"Working on file : %s\n" , filename); +if (do_open (O_RDWR ) ==FAIL ) +exit (1 ); + +setbuf (stderr,NULL ); + +if (server) { +int one =1 ; + + s_fd =socket (AF_INET ,SOCK_STREAM ,0 ); +if (s_fd ==INVALID_SOCKET ) { +perror ("socket" ); +exit (1 ); +/*NOTREACHED*/ + } +if (setsockopt (s_fd,IPPROTO_TCP ,TCP_NODELAY , (char *)&one,sizeof (one)) <0 ) { +perror ("setsockopt(nodelay)" ); +exit (1 ); +/*NOTREACHED*/ + } +if (setsockopt (s_fd,SOL_SOCKET ,SO_REUSEADDR , (char *)&one,sizeof (one))<0 ) { +perror ("setsockopt(reuseaddr)" ); +exit (1 ); +/*NOTREACHED*/ + } +#ifdef SO_REUSEPORT +if (setsockopt (s_fd,SOL_SOCKET ,SO_REUSEPORT , (char *)&one,sizeof (one))<0 ) { +perror ("setsockopt(reuseport)" ); +exit (1 ); +/*NOTREACHED*/ + } +#endif + +memset (&myAddr,0 ,sizeof (myAddr)); + myAddr.sin_family =AF_INET ; + myAddr.sin_addr.s_addr =htonl (INADDR_ANY ); + myAddr.sin_port =htons ((short )port); + sts =bind (s_fd, (struct sockaddr *)&myAddr,sizeof (myAddr)); +if (sts <0 ) { +perror ("bind" ); +exit (1 ); +/*NOTREACHED*/ + } + + sts =listen (s_fd,5 );/* Max. of 5 pending connection requests */ +if (sts ==-1 ) { +perror ("listen" ); +exit (1 ); +/*NOTREACHED*/ + } + +if (port ==0 ) { +socklen_t addr_len =sizeof (myAddr); + +if (getsockname (s_fd, &myAddr, &addr_len)) { +perror ("getsockname" ); +exit (1 ); + } + + port =ntohs (myAddr.sin_port); + } + +printf ("server port: %d\n" , port); +fflush (stdout); + + c_fd =accept (s_fd,NULL ,NULL ); +if (c_fd ==INVALID_SOCKET ) { +perror ("accept" ); +exit (1 ); +/*NOTREACHED*/ + } + +if (debug)fprintf (stderr,"Client accepted\n" ); +SRAND (12345L ); + } +else {/* Client initialization */ +struct hostent *servInfo; + +if ((servInfo =gethostbyname (host)) ==NULL ) { +printf ("Couldn't get hostbyname for %s" , host); +if (h_errno ==HOST_NOT_FOUND ) +printf (": host not found" ); +printf ("\n" ); +exit (1 ); +/*NOTREACHED*/ + } + + c_fd =socket (AF_INET ,SOCK_STREAM ,0 ); +if (c_fd ==INVALID_SOCKET ) { +perror ("socket" ); +exit (1 ); +/*NOTREACHED*/ + } +/* avoid 200 ms delay */ +if (setsockopt (c_fd,IPPROTO_TCP ,TCP_NODELAY , (char *)&i,sizeof (i)) <0 ) { +perror ("setsockopt(nodelay)" ); +exit (1 ); +/*NOTREACHED*/ + } +/* Don't linger on close */ +if (setsockopt (c_fd,SOL_SOCKET ,SO_LINGER , (char *)&noLinger,sizeof (noLinger)) <0 ) { +perror ("setsockopt(nolinger)" ); +exit (1 ); +/*NOTREACHED*/ + } + +memset (&myAddr,0 ,sizeof (myAddr));/* Arrgh! &myAddr, not myAddr */ + myAddr.sin_family =AF_INET ; +memcpy (&myAddr.sin_addr, servInfo->h_addr, servInfo->h_length); + myAddr.sin_port =htons ((short )port); + +if (connect (c_fd, (struct sockaddr *)&myAddr,sizeof (myAddr)) <0 ) { +perror ("unable to connect" ); +fprintf (stderr,"Server might still initializing the shared file\n " ); +exit (1 ); +/*NOTREACHED*/ + } + +if (debug)fprintf (stderr,"Connected to server\n" ); +SRAND (6789L ); + } + +if (server) +/* only server need do shared file */ +initialize (f_fd); + +/* +* TCP/IP connection to be established, safe to proceed. +* +* real work is in here ... +*/ + i =0 ; +{ +int index =0 ; +int end =0 ; +int result =0 ; +int last_test =0 ; +int test_count =0 ; +int fail_flag =0 ; +while (!end) { +if (server) { +if (testnumber >0 ) { + last_test = testnumber -1 ; +while (tests[index][TEST_NUM ] != testnumber && tests[index][TEST_NUM ] !=0 ) { + index++; + } + } +/* If we have a server command, deal with it */ +if (tests[index][WHO ] ==SERVER ) { +if (debug>1 ) +fprintf (stderr,"Got a server command (%d)\n" , index); +if (tests[index][TEST_NUM ] ==0 ) { + index++; +continue ; + } +memset (&ctl,0 ,sizeof (ctl)); + ctl.test = tests[index][TEST_NUM ]; + +if (tests[index][TEST_NUM ] !=0 ) { +switch (tests[index][COMMAND ]) { +case CMD_SETLEASE : + result =do_lease (F_SETLEASE , tests[index][ARG ],0 ); +break ; +case CMD_GETLEASE : + result =do_lease (F_GETLEASE , tests[index][ARG ], tests[index][ARG ]); +break ; +case CMD_CLOSE : + result =do_close (); +break ; +case CMD_OPEN : + result =do_open (tests[index][FLAGS ]); +break ; +default : + result = !tests[index][RESULT ]; +break ; + } +if ( result != tests[index][RESULT ]) { + fail_flag++; +/* We have a failure */ +if (debug) +fprintf (stderr,"Server failure in test %d, while %sing - err = %d:%s\n" , + ctl.test, +get_cmd_str (tests[index][COMMAND ]), + saved_errno,strerror (saved_errno)); +fprintf (stderr,"Server failure in %lld:%s\n" , + (long long )tests[index][TEST_NUM ], + descriptions[tests[index][TEST_NUM ] -1 ]); + } + } +/* else send it off to the client */ + }else if (tests[index][WHO ] ==CLIENT ) { +if (tests[index][TEST_NUM ] ==0 ) + end=1 ; + +/* get the client to do something */ +init_ctl (index); +if (debug >1 ) +fprintf (stderr,"Sending command to client (%d) - %s\n" , + index, +get_cmd_str (ctl.command)); +send_ctl (); + +if (!end) { +/* Get the clients response */ +recv_ctl (); +/* this is the whether the test passed or failed, +* not what the command returned */ +if ( ctl.result ==FAIL ) { + fail_flag++; +if (debug) +fprintf (stderr,"Client failure in test %d, while %sing - err = %d:%s\n" , + ctl.test,get_cmd_str (ctl.command), + ctl.error,strerror (ctl.error)); +fprintf (stderr,"Client failure in %d:%s\n" , + ctl.test, descriptions[ctl.test -1 ]); + } + } + } +if (debug >1 ) { +fprintf (stderr,"server sleeping ...\n" ); +SLEEP (1 ); + } +if (tests[index][TEST_NUM ] !=0 ) { +if (last_test != tests[index][TEST_NUM ]) { + test_count++; +if (fail_flag) + fail_count++; + fail_flag =0 ; + + } + last_test = tests[index][TEST_NUM ]; + } + + index++; + }else {/* CLIENT */ +if (debug >2 ) +fprintf (stderr,"client: waiting...\n" ); +/* wait for the server to do something */ +recv_ctl (); + +/* check for a client command */ + index = ctl.index; +if (tests[index][WHO ] !=CLIENT ) { +fprintf (stderr,"not a client command index (%d)\n" , index); +exit (1 ); + } + +if (ctl.test ==0 ) { + end =1 ; +break ; + } + +switch (ctl.command) { +case CMD_SETLEASE : + result =do_lease (F_SETLEASE , ctl.arg,0 ); +break ; +case CMD_GETLEASE : + result =do_lease (F_GETLEASE , ctl.arg, ctl.arg); +break ; +case CMD_CLOSE : + result =do_close (); +break ; +case CMD_OPEN : + result =do_open (tests[index][FLAGS ]); +break ; +case CMD_SIGIO : + result =do_setup_sigio (f_fd); +break ; +case CMD_WAIT_SIGIO : + result =do_wait_sigio (ctl.arg); +break ; + } +if ( result != ctl.result ) { +if (debug) +fprintf (stderr,"Got %d, wanted %d\n" , + result, ctl.result); + ctl.result =FAIL ; + ctl.error = saved_errno; + fail_count++; + }else { + ctl.result =PASS ; + ctl.error =0 ; + } +if (debug >2 ) +fprintf (stderr,"client: sending result to server (%d)\n" , ctl.index); +/* Send result to the server */ +send_ctl (); +if (tests[index][TEST_NUM ] !=0 ) { +if (last_test != tests[index][TEST_NUM ]) + test_count++; + last_test = tests[index][TEST_NUM ]; + } + } + } +if (server) +printf ("%d tests run, %d failed\n" , test_count, fail_count); +} + +exit (fail_count); +/*NOTREACHED*/ +} + +Signature · 1 line
2.20.1
PATCH v2 2/2 generic: Add Lease testing
In reply to [email protected]From: Ira Weiny <[email protected]>
Now that we have a leasetest executable add in a lease test script.
--- tests/generic/567 | 100 ++++++++++++++++++++++++++++++++++++++++++ tests/generic/567.out | 2 + tests/generic/group | 1 + 3 files changed, 103 insertions(+) create mode 100755 tests/generic/567 create mode 100644 tests/generic/567.out
tests/generic/567 new file +100 -0
@@ -0,0 +1,100 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Intel Corp. All Rights Reserved. +# +# FS QA Test 567 +# +# Test Leases +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 +#debug="-d -d -d" +debug="" + +TESTFILE=$TEST_DIR/lease_file + +_cleanup() +{ + kill $leasetest_pid2 > /dev/null 2>&1 + kill $leasetest_pid1 > /dev/null 2>&1 + rm -f $TESTFILE +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_test +_require_test_fcntl_advisory_locks + +# set up log files +SERVER_LOG=$TEST_DIR/server.out +CLIENT_LOG=$TEST_DIR/client.out +rm -f $SERVER_LOG +touch $SERVER_LOG +rm -f $CLIENT_LOG +touch $CLIENT_LOG + +if [ "$debug" != "" ]; then + echo "Test directory : $TEST_DIR" + echo "Result directory : $RESULT_DIR" + echo "Client log : $CLIENT_LOG" + echo "Server log : $SERVER_LOG" +fi + +touch $TESTFILE + +# Start the server +src/leasetest $debug $TESTFILE 2>&1 > $SERVER_LOG & +leasetest_pid1=$! + +timeout=30 +while [ $timeout -gt 0 ]; do + sleep 1 + + PORT=$(cat $SERVER_LOG | grep "^server port: " | awk '{print $3}') + if [ -n "$PORT" ]; then + break + fi + + # check the existence of server process + if ! kill -s 0 $leasetest_pid1 >/dev/null 2>&1; then + echo "Server died abnormally" + exit 1 + fi + + let timeout=timeout-1 +done + +if [ -z "$PORT" ]; then + echo "Could not get server port" + exit 1 +fi + +# Start the client +src/leasetest $debug -p $PORT -h localhost $TESTFILE 2>&1 > $CLIENT_LOG +leasetest_pid2=$! +result=$? +if [ $result -eq 0 ]; then + echo success! + status=0 +else + echo "Client reported failure ($result)" + cat $TEST_DIR/*.out +fi + +if [ "$debug" != "" ]; then + echo "End file details" + ls -la $TESTFILE +fi + +exit
tests/generic/567.out new file +2 -0
@@ -0,0 +1,2 @@ +QA output created by 567 +success!
tests/generic/group +1 -0
@@ -569,3 +569,4 @@ 564 auto quick copy_range 565 auto quick copy_range 566 auto quick quota metadata +567 auto quick locks
Signature · 1 line
2.20.1
Re: [PATCH V2 2/2] generic: Add Lease testing
Quoted 5 lines · On Thu, Sep 05, 2019 at 10:30:26AM -0700, [email protected] wrote:
From: Ira Weiny <[email protected]>
Now that we have a leasetest executable add in a lease test script.
Signed-off-by Ira Weiny <[email protected]>
The new test could be merged with patch 1.
Quoted 22 lines
--- tests/generic/567 | 100 ++++++++++++++++++++++++++++++++++++++++++ tests/generic/567.out | 2 + tests/generic/group | 1 + 3 files changed, 103 insertions(+) create mode 100755 tests/generic/567 create mode 100644 tests/generic/567.outtests/generic/567 new file +8
-0@@ -0,0 +1,100 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Intel Corp. All Rights Reserved. +# +# FS QA Test 567 +# +# Test Leases +#
tests/generic/567 line 18
Quoted 10 lines
tests/generic/567 new file +10
-0+seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 +#debug="-d -d -d" +debug=""
No need to define 'debug', if you need debug output, make 'debug' the default and dump all debug output to $seqres.full file.
Quoted 53 lines
tests/generic/567 new file +53
-0+ +TESTFILE=$TEST_DIR/lease_file + +_cleanup() +{ + kill $leasetest_pid2 > /dev/null 2>&1 + kill $leasetest_pid1 > /dev/null 2>&1 + rm -f $TESTFILE +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_test +_require_test_fcntl_advisory_locks + +# set up log files +SERVER_LOG=$TEST_DIR/server.out +CLIENT_LOG=$TEST_DIR/client.out +rm -f $SERVER_LOG +touch $SERVER_LOG +rm -f $CLIENT_LOG +touch $CLIENT_LOG + +if [ "$debug" != "" ]; then + echo "Test directory : $TEST_DIR" + echo "Result directory : $RESULT_DIR" + echo "Client log : $CLIENT_LOG" + echo "Server log : $SERVER_LOG" +fi + +touch $TESTFILE + +# Start the server +src/leasetest $debug $TESTFILE 2>&1 > $SERVER_LOG & +leasetest_pid1=$! + +timeout=30 +while [ $timeout -gt 0 ]; do + sleep 1 + + PORT=$(cat $SERVER_LOG | grep "^server port: " | awk '{print $3}') + if [ -n "$PORT" ]; then + break + fi + + # check the existence of server process + if ! kill -s 0 $leasetest_pid1 >/dev/null 2>&1; then + echo "Server died abnormally"
tests/generic/567 line 81
Quoted 10 lines
tests/generic/567 new file +10
-0+ exit 1 + fi + + let timeout=timeout-1 +done + +if [ -z "$PORT" ]; then + echo "Could not get server port" + exit 1 +fi
The whole "discovering server port" part in generic/131 has been patched several times in the past to fix corner cases here and there, we'd better to refactor this hunk into a common helper, instead of duplicating the code.
Quoted 9 lines
tests/generic/567 new file +9
-0+ +# Start the client +src/leasetest $debug -p $PORT -h localhost $TESTFILE 2>&1 > $CLIENT_LOG +leasetest_pid2=$! +result=$? +if [ $result -eq 0 ]; then + echo success! + status=0 +else
tests/generic/567 line 100
Quoted 10 lines
tests/generic/567 new file +10
-0+ echo "Client reported failure ($result)" + cat $TEST_DIR/*.out +fi + +if [ "$debug" != "" ]; then + echo "End file details" + ls -la $TESTFILE +fi + +exit
echo "Silence is golden"
src/leasetest ...
leasetest_pid2=$!
result=$?
if [ $result -ne 0 ]; then
echo "Server log" >> $seqres.full
cat $SERVER_LOG >> $seqres.full
echo "Client log" >> $seqres.full
cat $CLIENT_LOG >> $seqres.full
_fail "Client reported failure ($result)"
fi
status=0
exit
_fail will output the failure message, which breaks the golden output, and prompt user to check $seqres.full file for details.
Thanks,
Eryu
Quoted 20 lines
tests/generic/567.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 567 +success!tests/generic/group +1
-0@@ -569,3 +569,4 @@ 564 auto quick copy_range 565 auto quick copy_range 566 auto quick quota metadata +567 auto quick locksSignature · 1 line
2.20.1
Re: [PATCH V2 2/2] generic: Add Lease testing
Quoted 8 lines · Eryu Guan
Quoted 5 lines · On Thu, Sep 05, 2019 at 10:30:26AM -0700, [email protected] wrote:
From: Ira Weiny <[email protected]>
Now that we have a leasetest executable add in a lease test script.
Signed-off-by Ira Weiny <[email protected]>The new test could be merged with patch 1.
Ok, I was not sure how best to submit this. Now I know.
Quoted 28 lines
Quoted 28 lines
--- tests/generic/567 | 100 ++++++++++++++++++++++++++++++++++++++++++ tests/generic/567.out | 2 + tests/generic/group | 1 + 3 files changed, 103 insertions(+) create mode 100755 tests/generic/567 create mode 100644 tests/generic/567.outtests/generic/567 new file +13
-0@@ -0,0 +1,100 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Intel Corp. All Rights Reserved. +# +# FS QA Test 567 +# +# Test Leases +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd`
Quoted 8 lines
tests/generic/567 line 18
Quoted 5 lines
tests/generic/567 new file +5
-0+tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 +#debug="-d -d -d" +debug=""No need to define 'debug', if you need debug output, make 'debug' the default and dump all debug output to $seqres.full file.
I'll check this out. I'm new to the harness so I was not sure what got output where.
FWIW I think that means we can simplify leasetest even more then. Remove all the "debug" flags and leave stderr for error condition details.
Anyway, your comment WRT leasetest is that you would like to see locktest "modernized" to include lease testing? Is that correct? If so, would you like me to make these script modifications to 131? Or would you like to see 2 "modes" of locktest?
I'm not convinced that overloading the parameters of the test array in locktest is a good idea. There are already a number of confusing overloads there. And leasetest is going to get some of its own which will further complicate things. (I have added truncate tests to lease testing as well.)
Quoted 61 lines
Quoted 61 lines
tests/generic/567 new file +60
-0+ +TESTFILE=$TEST_DIR/lease_file + +_cleanup() +{ + kill $leasetest_pid2 > /dev/null 2>&1 + kill $leasetest_pid1 > /dev/null 2>&1 + rm -f $TESTFILE +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_test +_require_test_fcntl_advisory_locks + +# set up log files +SERVER_LOG=$TEST_DIR/server.out +CLIENT_LOG=$TEST_DIR/client.out +rm -f $SERVER_LOG +touch $SERVER_LOG +rm -f $CLIENT_LOG +touch $CLIENT_LOG + +if [ "$debug" != "" ]; then + echo "Test directory : $TEST_DIR" + echo "Result directory : $RESULT_DIR" + echo "Client log : $CLIENT_LOG" + echo "Server log : $SERVER_LOG" +fi + +touch $TESTFILE + +# Start the server +src/leasetest $debug $TESTFILE 2>&1 > $SERVER_LOG & +leasetest_pid1=$! + +timeout=30 +while [ $timeout -gt 0 ]; do + sleep 1 + + PORT=$(cat $SERVER_LOG | grep "^server port: " | awk '{print $3}') + if [ -n "$PORT" ]; then + break + fi + + # check the existence of server process + if ! kill -s 0 $leasetest_pid1 >/dev/null 2>&1; then + echo "Server died abnormally" + exit 1 + fi + + let timeout=timeout-1 +done + +if [ -z "$PORT" ]; then
Quoted 8 lines
tests/generic/567 line 81
Quoted 3 lines
tests/generic/567 new file +3
-0+ echo "Could not get server port" + exit 1 +fiThe whole "discovering server port" part in generic/131 has been patched several times in the past to fix corner cases here and there, we'd better to refactor this hunk into a common helper, instead of duplicating the code.
You mean refactor this to be common between this and the generic/131 (locktest)?
But see my comment above.
Quoted 35 lines
Quoted 10 lines
tests/generic/567 new file +9
-0+ +# Start the client +src/leasetest $debug -p $PORT -h localhost $TESTFILE 2>&1 > $CLIENT_LOG +leasetest_pid2=$! +result=$? +if [ $result -eq 0 ]; then + echo success! + status=0 +elsetests/generic/567 line 100
Quoted 10 lines
tests/generic/567 new file +10
-0+ echo "Client reported failure ($result)" + cat $TEST_DIR/*.out +fi + +if [ "$debug" != "" ]; then + echo "End file details" + ls -la $TESTFILE +fi + +exitecho "Silence is golden"
src/leasetest ...
leasetest_pid2=$!
result=$?
if [ $result -ne 0 ]; then
echo "Server log" >> $seqres.full
cat $SERVER_LOG >> $seqres.full
echo "Client log" >> $seqres.full
cat $CLIENT_LOG >> $seqres.full
_fail"Client reported failure ($result)"
fi
status=0
exit
Quoted 2 lines
_failwill output the failure message, which breaks the golden output, and prompt user to check $seqres.full file for details.
Ah ok I see. Sorry I was not aware of $seqres.full My bad...
I'll see if I can clean up what is really "debugging" vs not as well within leasetest.
Thanks,
Ira
Quoted 24 lines
Thanks,
EryuQuoted 20 lines
tests/generic/567.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 567 +success!tests/generic/group +1
-0@@ -569,3 +569,4 @@ 564 auto quick copy_range 565 auto quick copy_range 566 auto quick quota metadata +567 auto quick locksSignature · 1 line
2.20.1
Re: [PATCH V2 2/2] generic: Add Lease testing
Quoted 48 lines · Ira Weiny
Quoted 8 lines · Eryu Guan
Quoted 5 lines · On Thu, Sep 05, 2019 at 10:30:26AM -0700, [email protected] wrote:
From: Ira Weiny <[email protected]>
Now that we have a leasetest executable add in a lease test script.
Signed-off-by Ira Weiny <[email protected]>The new test could be merged with patch 1.
Ok, I was not sure how best to submit this. Now I know.
Quoted 28 lines
Quoted 28 lines
--- tests/generic/567 | 100 ++++++++++++++++++++++++++++++++++++++++++ tests/generic/567.out | 2 + tests/generic/group | 1 + 3 files changed, 103 insertions(+) create mode 100755 tests/generic/567 create mode 100644 tests/generic/567.outtests/generic/567 new file +13
-0@@ -0,0 +1,100 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Intel Corp. All Rights Reserved. +# +# FS QA Test 567 +# +# Test Leases +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd`Quoted 8 lines
tests/generic/567 line 18
Quoted 5 lines
tests/generic/567 new file +5
-0+tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 +#debug="-d -d -d" +debug=""No need to define 'debug', if you need debug output, make 'debug' the default and dump all debug output to $seqres.full file.
Quoted 2 lines
I'll check this out. I'm new to the harness so I was not sure what got output where.
Basically, all stdout and stderr outputs from the test script are recorded by the harness and compared with the golden output (the .out file) after test, and fail the test if they are different. And $seqres.full is a place for holding verbose test outputs for debug purpose, which are used to help determine what's really going wrong.
Quoted 3 lines
FWIW I think that means we can simplify leasetest even more then. Remove all the "debug" flags and leave stderr for error condition details.
Only if we dump all the outputs to $seqres.full and test only depends on the return value of leasetest.
Quoted 10 lines
Anyway, your comment WRT leasetest is that you would like to see locktest "modernized" to include lease testing? Is that correct? If so, would you like me to make these script modifications to 131? Or would you like to see 2 "modes" of locktest?
I'm not convinced that overloading the parameters of the test array in locktest is a good idea. There are already a number of confusing overloads there. And leasetest is going to get some of its own which will further complicate things. (I have added truncate tests to lease testing as well.)
I was thinking of two modes, not overloading the parameters of single test array, i.e. define two test arrays, one for locktest and another for lease test, and using which array is determined by command switch. But either way is fine if we could reuse the framework from locktest.
Quoted 71 lines
Quoted 62 lines
Quoted 62 lines
tests/generic/567 new file +60
-0+ +TESTFILE=$TEST_DIR/lease_file + +_cleanup() +{ + kill $leasetest_pid2 > /dev/null 2>&1 + kill $leasetest_pid1 > /dev/null 2>&1 + rm -f $TESTFILE +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_test +_require_test_fcntl_advisory_locks + +# set up log files +SERVER_LOG=$TEST_DIR/server.out +CLIENT_LOG=$TEST_DIR/client.out +rm -f $SERVER_LOG +touch $SERVER_LOG +rm -f $CLIENT_LOG +touch $CLIENT_LOG + +if [ "$debug" != "" ]; then + echo "Test directory : $TEST_DIR" + echo "Result directory : $RESULT_DIR" + echo "Client log : $CLIENT_LOG" + echo "Server log : $SERVER_LOG" +fi + +touch $TESTFILE + +# Start the server +src/leasetest $debug $TESTFILE 2>&1 > $SERVER_LOG & +leasetest_pid1=$! + +timeout=30 +while [ $timeout -gt 0 ]; do + sleep 1 + + PORT=$(cat $SERVER_LOG | grep "^server port: " | awk '{print $3}') + if [ -n "$PORT" ]; then + break + fi + + # check the existence of server process + if ! kill -s 0 $leasetest_pid1 >/dev/null 2>&1; then + echo "Server died abnormally" + exit 1 + fi + + let timeout=timeout-1 +done + +if [ -z "$PORT" ]; thenQuoted 8 lines
tests/generic/567 line 81
Quoted 3 lines
tests/generic/567 new file +3
-0+ echo "Could not get server port" + exit 1 +fiThe whole "discovering server port" part in generic/131 has been patched several times in the past to fix corner cases here and there, we'd better to refactor this hunk into a common helper, instead of duplicating the code.
Quoted 2 lines
You mean refactor this to be common between this and the generic/131 (locktest)?
Correct.
Quoted 38 lines
But see my comment above.
Quoted 35 lines
Quoted 10 lines
tests/generic/567 new file +9
-0+ +# Start the client +src/leasetest $debug -p $PORT -h localhost $TESTFILE 2>&1 > $CLIENT_LOG +leasetest_pid2=$! +result=$? +if [ $result -eq 0 ]; then + echo success! + status=0 +elsetests/generic/567 line 100
Quoted 10 lines
tests/generic/567 new file +10
-0+ echo "Client reported failure ($result)" + cat $TEST_DIR/*.out +fi + +if [ "$debug" != "" ]; then + echo "End file details" + ls -la $TESTFILE +fi + +exitecho "Silence is golden"
src/leasetest ...
leasetest_pid2=$!
result=$?
if [ $result -ne 0 ]; then
echo "Server log" >> $seqres.full
cat $SERVER_LOG >> $seqres.full
echo "Client log" >> $seqres.full
cat $CLIENT_LOG >> $seqres.full
_fail"Client reported failure ($result)"
fi
status=0
exit
Quoted 4 lines
Quoted 2 lines
_failwill output the failure message, which breaks the golden output, and prompt user to check $seqres.full file for details.Ah ok I see. Sorry I was not aware of $seqres.full My bad...
Not a problem :)
Quoted 3 lines
I'll see if I can clean up what is really "debugging" vs not as well within leasetest.
Thanks for the test!
Eryu