iommu: Bounce page for untrusted devices
Subsystems (6)
v9 cover iommu: Bounce page for untrusted devices
The Thunderbolt vulnerabilities are public and have a nice name as Thunderclap [1] [3] nowadays. This patch series aims to mitigate those concerns.
An external PCI device is a PCI peripheral device connected to the system through an external bus, such as Thunderbolt. What makes it different is that it can't be trusted to the same degree as the devices build into the system. Generally, a trusted PCIe device will DMA into the designated buffers and not overrun or otherwise write outside the specified bounds. But it's different for an external device.
The minimum IOMMU mapping granularity is one page (4k), so for DMA transfers smaller than that a malicious PCIe device can access the whole page of memory even if it does not belong to the driver in question. This opens a possibility for DMA attack. For more information about DMA attacks imposed by an untrusted PCI/PCIe device, please refer to [2].
This implements bounce buffer for the untrusted external devices. The transfers should be limited in isolated pages so the IOMMU window does not cover memory outside of what the driver expects. Previously (v3 and before), we proposed an optimisation to only copy the head and tail of the buffer if it spans multiple pages, and directly map the ones in the middle. Figure 1 gives a big picture about this solution.
swiotlb System
IOVA bounce page Memory
.---------. .---------. .---------.
| | | | | |
| | | | | |
buffer_start .---------. .---------. .---------.
| |----->| |*******>| |
| | | | swiotlb| |
| | | | mapping| |
IOMMU Page '---------' '---------' '---------'
Boundary | | | |
| | | |
| | | |
| |------------------------>| |
| | IOMMU mapping | |
| | | |
IOMMU Page .---------. .---------.
Boundary | | | |
| | | |
| |------------------------>| |
| | IOMMU mapping | |
| | | |
| | | |
IOMMU Page .---------. .---------. .---------.
Boundary | | | | | |
| | | | | |
| |----->| |*******>| |
buffer_end '---------' '---------' swiotlb'---------'
| | | | mapping| |
| | | | | |
'---------' '---------' '---------'Figure 1: A big view of iommu bounce page
As Robin Murphy pointed out, this ties us to using strict mode for TLB maintenance, which may not be an overall win depending on the balance between invalidation bandwidth vs. memcpy bandwidth. If we use standard SWIOTLB logic to always copy the whole thing, we should be able to release the bounce pages via the flush queue to allow 'safe' lazy unmaps. So since v4 we start to use the standard swiotlb logic.
swiotlb System
IOVA bounce page Memory
buffer_start .---------. .---------. .---------.
| | | | | |
| | | | | |
| | | | .---------.physical
| |----->| | ------>| |_start
| |iommu | | swiotlb| |
| | map | | map | |
IOMMU Page .---------. .---------. '---------'
Boundary | | | | | |
| | | | | |
| |----->| | | |
| |iommu | | | |
| | map | | | |
| | | | | |
IOMMU Page .---------. .---------. .---------.
Boundary | | | | | |
| |----->| | | |
| |iommu | | | |
| | map | | | |
| | | | | |
IOMMU Page | | | | | |
Boundary .---------. .---------. .---------.
| | | |------->| |
buffer_end '---------' '---------' swiotlb| |
| |----->| | map | |
| |iommu | | | |
| | map | | '---------' physical
| | | | | | _end
'---------' '---------' '---------'Figure 2: A big view of simplified iommu bounce page
The implementation of bounce buffers for untrusted devices will cause a little performance overhead, but we didn't see any user experience problems. The users could use the kernel parameter defined in the IOMMU driver to remove the performance overhead if they trust their devices enough.
This series introduces below APIs for bounce page:
* iommu_bounce_map(dev, addr, paddr, size, dir, attrs)
- Map a buffer start at DMA address @addr in bounce page manner. For buffer that doesn't cross whole minimal IOMMU pages, the bounce buffer policy is applied. A bounce page mapped by swiotlb will be used as the DMA target in the IOMMU page table.
* iommu_bounce_unmap(dev, addr, size, dir, attrs)
- Unmap the buffer mapped with iommu_bounce_map(). The bounce page will be torn down after the bounced data get synced.
* iommu_bounce_sync_single(dev, addr, size, dir, target)
- Synce the bounced data in case the bounce mapped buffer is reused.
The bounce page idea:
The patch series has been tested by:
Reference:
[1] https://thunderclap.io/
[2] https://thunderclap.io/thunderclap-paper-ndss2019.pdf
[3] https://christian.kellner.me/2019/02/27/thunderclap-and-linux/
[4] https://lkml.org/lkml/2019/3/4/644
Best regards,
Baolu
Change log:
v8->v9:
- The previous v8 was posted here:
https://lkml.org/lkml/2019/8/30/170
- Remove the pci dependency in swiotlb by moving clearing padding area code to the place where the bounce buffer is really used for the untrusted devices.
- Add some extra dma map/unmap trace events.
v7->v8:
- The previous v7 was posted here:
https://lkml.org/lkml/2019/8/23/83
- Keep the swiotlb pre-allocated pages only if intel-iommu driver needs bounce buffers, a.k.a. system has untrusted devices or external ports.
v6->v7:
- The previous v6 was posted here:
https://lkml.org/lkml/2019/7/30/18
- Remove the unnecessary bounce page iommu APIs
v5->v6:
- The previous v5 was posted here:
https://lkml.org/lkml/2019/7/24/2134
- Move the per-device dma ops into another seperated series.
- Christoph Hellwig reviewed the patches and add his Reviewed-bys.
- Add Steven Rostedt's Review-by for the trace patch.
- Adress the review comments from Christoph Hellwig.
- This patch series is now based on v5.3-rc2.
v4->v5:
- The previous v4 was posted here:
https://lkml.org/lkml/2019/6/2/187 - Add per-device dma ops and use bounce buffer specific dma ops for those untrusted devices. devices with identity domains -> system default dma ops trusted devices with dma domains -> iommu/vt-d dma ops untrusted devices -> bounced dma ops
- Address various review comments received since v4.
- This patch series is based on v5.3-rc1.
v3->v4:
- The previous v3 was posted here:
https://lkml.org/lkml/2019/4/20/213
- Discard the optimization of only mapping head and tail partial pages, use the standard swiotlb in order to achieve iotlb flush efficiency.
- This patch series is based on the top of the vt-d branch of Joerg's iommu tree.
v2->v3:
- The previous v2 was posed here:
https://lkml.org/lkml/2019/3/27/157
- Reuse the existing swiotlb APIs for bounce buffer by extending it to support bounce page.
- Move the bouce page APIs into iommu generic layer.
- This patch series is based on 5.1-rc1.
v1->v2:
- The previous v1 was posted here:
https://lkml.org/lkml/2019/3/12/66
- Refactor the code to remove struct bounce_param;
- During the v1 review cycle, we discussed the possibility of reusing swiotlb code to avoid code dumplication, but we found the swiotlb implementations are not ready for the use of bounce page pool.
https://lkml.org/lkml/2019/3/19/259
- This patch series has been rebased to v5.1-rc2.
Lu Baolu (5):
swiotlb: Split size parameter to map/unmap APIs iommu/vt-d: Check whether device requires bounce buffer iommu/vt-d: Don't switch off swiotlb if bounce page is used iommu/vt-d: Add trace events for device dma map/unmap iommu/vt-d: Use bounce buffer for untrusted devices
.../admin-guide/kernel-parameters.txt | 5 + drivers/iommu/Kconfig | 1 + drivers/iommu/Makefile | 1 + drivers/iommu/intel-iommu.c | 310 +++++++++++++++++- drivers/iommu/intel-trace.c | 14 + drivers/xen/swiotlb-xen.c | 8 +- include/linux/swiotlb.h | 8 +- include/trace/events/intel_iommu.h | 106 ++++++ kernel/dma/direct.c | 2 +- kernel/dma/swiotlb.c | 30 +- 10 files changed, 449 insertions(+), 36 deletions(-) create mode 100644 drivers/iommu/intel-trace.c create mode 100644 include/trace/events/intel_iommu.h
Signature · 1 line
2.17.1
PATCH v9 1/5 swiotlb: Split size parameter to map/unmap APIs
This splits the size parameter to swiotlb_tbl_map_single() and swiotlb_tbl_unmap_single() into an alloc_size and a mapping_size parameter, where the latter one is rounded up to the iommu page size.
--- drivers/xen/swiotlb-xen.c | 8 ++++---- include/linux/swiotlb.h | 8 ++++++-- kernel/dma/direct.c | 2 +- kernel/dma/swiotlb.c | 30 +++++++++++++++++++----------- 4 files changed, 30 insertions(+), 18 deletions(-)
drivers/xen/swiotlb-xen.c +4 -4
@@ -386,8 +386,8 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,*/ trace_swiotlb_bounced (dev, dev_addr, size, swiotlb_force); - map =swiotlb_tbl_map_single (dev, start_dma_addr, phys, size, dir, - attrs); + map =swiotlb_tbl_map_single (dev, start_dma_addr, phys, + size, size, dir, attrs);if (map == (phys_addr_t )DMA_MAPPING_ERROR )return DMA_MAPPING_ERROR ;
@@ -397,7 +397,7 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,* Ensure that the address returned is DMA'ble */ if (unlikely (!dma_capable (dev, dev_addr, size))) { -swiotlb_tbl_unmap_single (dev, map, size, dir, +swiotlb_tbl_unmap_single (dev, map, size, size, dir, attrs |DMA_ATTR_SKIP_CPU_SYNC );return DMA_MAPPING_ERROR ; }
@@ -433,7 +433,7 @@ static void xen_unmap_single(struct device *hwdev, dma_addr_t dev_addr,/* NOTE: We use dev_addr here, not paddr! */ if (is_xen_swiotlb_buffer (dev_addr)) -swiotlb_tbl_unmap_single (hwdev, paddr, size, dir, attrs); +swiotlb_tbl_unmap_single (hwdev, paddr, size, size, dir, attrs); } static void xen_swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
include/linux/swiotlb.h +6 -2
@@ -46,13 +46,17 @@ enum dma_sync_target {extern phys_addr_t swiotlb_tbl_map_single (struct device *hwdev,dma_addr_t tbl_dma_addr, -phys_addr_t phys,size_t size, +phys_addr_t phys, +size_t mapping_size, +size_t alloc_size,enum dma_data_direction dir,unsigned long attrs);extern void swiotlb_tbl_unmap_single (struct device *hwdev,phys_addr_t tlb_addr, -size_t size,enum dma_data_direction dir, +size_t mapping_size, +size_t alloc_size, +enum dma_data_direction dir,unsigned long attrs); extern void swiotlb_tbl_sync_single(struct device *hwdev,
kernel/dma/direct.c +1 -1
@@ -305,7 +305,7 @@ void dma_direct_unmap_page(struct device *dev, dma_addr_t addr,dma_direct_sync_single_for_cpu (dev, addr, size, dir);if (unlikely (is_swiotlb_buffer (phys))) -swiotlb_tbl_unmap_single (dev, phys, size, dir, attrs); +swiotlb_tbl_unmap_single (dev, phys, size, size, dir, attrs); }EXPORT_SYMBOL (dma_direct_unmap_page);
kernel/dma/swiotlb.c +19 -11
@@ -444,7 +444,9 @@ static void swiotlb_bounce(phys_addr_t orig_addr, phys_addr_t tlb_addr,phys_addr_t swiotlb_tbl_map_single (struct device *hwdev,dma_addr_t tbl_dma_addr, -phys_addr_t orig_addr,size_t size, +phys_addr_t orig_addr, +size_t mapping_size, +size_t alloc_size,enum dma_data_direction dir,unsigned long attrs) {
@@ -464,6 +466,9 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,pr_warn_once ("%s is active and system is using DMA bounce buffers\n" ,sme_active () ?"SME" :"SEV" ); +if (WARN_ON (mapping_size > alloc_size)) +return (phys_addr_t )DMA_MAPPING_ERROR ; + mask =dma_get_seg_boundary (hwdev); tbl_dma_addr &= mask;
@@ -481,8 +486,8 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,* For mappings greater than or equal to a page, we limit the stride * (and hence alignment) to a page size. */ - nslots =ALIGN (size,1 <<IO_TLB_SHIFT ) >>IO_TLB_SHIFT ; -if (size >=PAGE_SIZE ) + nslots =ALIGN (alloc_size,1 <<IO_TLB_SHIFT ) >>IO_TLB_SHIFT ; +if (alloc_size >=PAGE_SIZE ) stride = (1 << (PAGE_SHIFT -IO_TLB_SHIFT ));else stride =1 ;
@@ -547,7 +552,7 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,spin_unlock_irqrestore (&io_tlb_lock, flags);if (!(attrs &DMA_ATTR_NO_WARN ) &&printk_ratelimit ())dev_warn (hwdev,"swiotlb buffer is full (sz: %zd bytes), total %lu (slots), used %lu (slots)\n" , - size, io_tlb_nslabs, tmp_io_tlb_used); + alloc_size, io_tlb_nslabs, tmp_io_tlb_used);return (phys_addr_t )DMA_MAPPING_ERROR ; found: io_tlb_used += nslots;
@@ -562,7 +567,7 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev, io_tlb_orig_addr[index+i] = orig_addr + (i <<IO_TLB_SHIFT );if (!(attrs &DMA_ATTR_SKIP_CPU_SYNC ) && (dir ==DMA_TO_DEVICE || dir ==DMA_BIDIRECTIONAL )) -swiotlb_bounce (orig_addr, tlb_addr, size,DMA_TO_DEVICE ); +swiotlb_bounce (orig_addr, tlb_addr, mapping_size,DMA_TO_DEVICE );return tlb_addr; }
@@ -571,21 +576,24 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,* tlb_addr is the physical address of the bounce buffer to unmap. */ void swiotlb_tbl_unmap_single (struct device *hwdev,phys_addr_t tlb_addr, -size_t size,enum dma_data_direction dir, -unsigned long attrs) +size_t mapping_size,size_t alloc_size, +enum dma_data_direction dir,unsigned long attrs) {unsigned long flags; -int i, count, nslots =ALIGN (size,1 <<IO_TLB_SHIFT ) >>IO_TLB_SHIFT ; +int i, count, nslots =ALIGN (alloc_size,1 <<IO_TLB_SHIFT ) >>IO_TLB_SHIFT ;int index = (tlb_addr - io_tlb_start) >>IO_TLB_SHIFT ;phys_addr_t orig_addr = io_tlb_orig_addr[index]; +if (WARN_ON (mapping_size > alloc_size)) +return ; +/* * First, sync the memory before unmapping the entry */ if (orig_addr !=INVALID_PHYS_ADDR && !(attrs &DMA_ATTR_SKIP_CPU_SYNC ) && ((dir ==DMA_FROM_DEVICE ) || (dir ==DMA_BIDIRECTIONAL ))) -swiotlb_bounce (orig_addr, tlb_addr, size,DMA_FROM_DEVICE ); +swiotlb_bounce (orig_addr, tlb_addr, mapping_size,DMA_FROM_DEVICE );/* * Return the buffer to the free list by setting the corresponding
@@ -665,14 +673,14 @@ bool swiotlb_map(struct device *dev, phys_addr_t *phys, dma_addr_t *dma_addr,/* Oh well, have to allocate and map a bounce buffer. */ *phys =swiotlb_tbl_map_single (dev,__phys_to_dma (dev, io_tlb_start), - *phys, size, dir, attrs); + *phys, size, size, dir, attrs);if (*phys == (phys_addr_t )DMA_MAPPING_ERROR )return false;/* Ensure that the address returned is DMA'ble */ *dma_addr =__phys_to_dma (dev, *phys);if (unlikely (!dma_capable (dev, *dma_addr, size))) { -swiotlb_tbl_unmap_single (dev, *phys, size, dir, +swiotlb_tbl_unmap_single (dev, *phys, size, size, dir, attrs |DMA_ATTR_SKIP_CPU_SYNC );return false; }
Signature · 6 lines
2.17.1 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [PATCH v9 1/5] swiotlb: Split size parameter to map/unmap APIs
Quoted 4 lines · Lu Baolu
This splits the size parameter to
swiotlb_tbl_map_single()andswiotlb_tbl_unmap_single()into analloc_sizeand amapping_sizeparameter, where the latter one is rounded up to the iommu page size.
It does a bit more too. You have the WARN_ON. Can you make it be
more verbose (as in details of which device requested it) and also use printk_once or so please?
Quoted 184 lines
Suggested-by Christoph Hellwig <[email protected]>Signed-off-by Lu Baolu <[email protected]>Reviewed-by Christoph Hellwig <[email protected]>--- drivers/xen/swiotlb-xen.c | 8 ++++---- include/linux/swiotlb.h | 8 ++++++-- kernel/dma/direct.c | 2 +- kernel/dma/swiotlb.c | 30 +++++++++++++++++++----------- 4 files changed, 30 insertions(+), 18 deletions(-)drivers/xen/swiotlb-xen.c +4
-4@@ -386,8 +386,8 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,*/ trace_swiotlb_bounced (dev, dev_addr, size, swiotlb_force); - map =swiotlb_tbl_map_single (dev, start_dma_addr, phys, size, dir, - attrs); + map =swiotlb_tbl_map_single (dev, start_dma_addr, phys, + size, size, dir, attrs);if (map == (phys_addr_t )DMA_MAPPING_ERROR )return DMA_MAPPING_ERROR ;@@ -397,7 +397,7 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,* Ensure that the address returned is DMA'ble */ if (unlikely (!dma_capable (dev, dev_addr, size))) { -swiotlb_tbl_unmap_single (dev, map, size, dir, +swiotlb_tbl_unmap_single (dev, map, size, size, dir, attrs |DMA_ATTR_SKIP_CPU_SYNC );return DMA_MAPPING_ERROR ; }@@ -433,7 +433,7 @@ static void xen_unmap_single(struct device *hwdev, dma_addr_t dev_addr,/* NOTE: We use dev_addr here, not paddr! */ if (is_xen_swiotlb_buffer (dev_addr)) -swiotlb_tbl_unmap_single (hwdev, paddr, size, dir, attrs); +swiotlb_tbl_unmap_single (hwdev, paddr, size, size, dir, attrs); } static void xen_swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,include/linux/swiotlb.h +6
-2@@ -46,13 +46,17 @@ enum dma_sync_target {extern phys_addr_t swiotlb_tbl_map_single (struct device *hwdev,dma_addr_t tbl_dma_addr, -phys_addr_t phys,size_t size, +phys_addr_t phys, +size_t mapping_size, +size_t alloc_size,enum dma_data_direction dir,unsigned long attrs);extern void swiotlb_tbl_unmap_single (struct device *hwdev,phys_addr_t tlb_addr, -size_t size,enum dma_data_direction dir, +size_t mapping_size, +size_t alloc_size, +enum dma_data_direction dir,unsigned long attrs); extern void swiotlb_tbl_sync_single(struct device *hwdev,kernel/dma/direct.c +1
-1@@ -305,7 +305,7 @@ void dma_direct_unmap_page(struct device *dev, dma_addr_t addr,dma_direct_sync_single_for_cpu (dev, addr, size, dir);if (unlikely (is_swiotlb_buffer (phys))) -swiotlb_tbl_unmap_single (dev, phys, size, dir, attrs); +swiotlb_tbl_unmap_single (dev, phys, size, size, dir, attrs); }EXPORT_SYMBOL (dma_direct_unmap_page);kernel/dma/swiotlb.c +19
-11@@ -444,7 +444,9 @@ static void swiotlb_bounce(phys_addr_t orig_addr, phys_addr_t tlb_addr,phys_addr_t swiotlb_tbl_map_single (struct device *hwdev,dma_addr_t tbl_dma_addr, -phys_addr_t orig_addr,size_t size, +phys_addr_t orig_addr, +size_t mapping_size, +size_t alloc_size,enum dma_data_direction dir,unsigned long attrs) {@@ -464,6 +466,9 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,pr_warn_once ("%s is active and system is using DMA bounce buffers\n" ,sme_active () ?"SME" :"SEV" ); +if (WARN_ON (mapping_size > alloc_size)) +return (phys_addr_t )DMA_MAPPING_ERROR ; + mask =dma_get_seg_boundary (hwdev); tbl_dma_addr &= mask;@@ -481,8 +486,8 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,* For mappings greater than or equal to a page, we limit the stride * (and hence alignment) to a page size. */ - nslots =ALIGN (size,1 <<IO_TLB_SHIFT ) >>IO_TLB_SHIFT ; -if (size >=PAGE_SIZE ) + nslots =ALIGN (alloc_size,1 <<IO_TLB_SHIFT ) >>IO_TLB_SHIFT ; +if (alloc_size >=PAGE_SIZE ) stride = (1 << (PAGE_SHIFT -IO_TLB_SHIFT ));else stride =1 ;@@ -547,7 +552,7 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,spin_unlock_irqrestore (&io_tlb_lock, flags);if (!(attrs &DMA_ATTR_NO_WARN ) &&printk_ratelimit ())dev_warn (hwdev,"swiotlb buffer is full (sz: %zd bytes), total %lu (slots), used %lu (slots)\n" , - size, io_tlb_nslabs, tmp_io_tlb_used); + alloc_size, io_tlb_nslabs, tmp_io_tlb_used);return (phys_addr_t )DMA_MAPPING_ERROR ; found: io_tlb_used += nslots;@@ -562,7 +567,7 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev, io_tlb_orig_addr[index+i] = orig_addr + (i <<IO_TLB_SHIFT );if (!(attrs &DMA_ATTR_SKIP_CPU_SYNC ) && (dir ==DMA_TO_DEVICE || dir ==DMA_BIDIRECTIONAL )) -swiotlb_bounce (orig_addr, tlb_addr, size,DMA_TO_DEVICE ); +swiotlb_bounce (orig_addr, tlb_addr, mapping_size,DMA_TO_DEVICE );return tlb_addr; }@@ -571,21 +576,24 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,* tlb_addr is the physical address of the bounce buffer to unmap. */ void swiotlb_tbl_unmap_single (struct device *hwdev,phys_addr_t tlb_addr, -size_t size,enum dma_data_direction dir, -unsigned long attrs) +size_t mapping_size,size_t alloc_size, +enum dma_data_direction dir,unsigned long attrs) {unsigned long flags; -int i, count, nslots =ALIGN (size,1 <<IO_TLB_SHIFT ) >>IO_TLB_SHIFT ; +int i, count, nslots =ALIGN (alloc_size,1 <<IO_TLB_SHIFT ) >>IO_TLB_SHIFT ;int index = (tlb_addr - io_tlb_start) >>IO_TLB_SHIFT ;phys_addr_t orig_addr = io_tlb_orig_addr[index]; +if (WARN_ON (mapping_size > alloc_size)) +return ; +/* * First, sync the memory before unmapping the entry */ if (orig_addr !=INVALID_PHYS_ADDR && !(attrs &DMA_ATTR_SKIP_CPU_SYNC ) && ((dir ==DMA_FROM_DEVICE ) || (dir ==DMA_BIDIRECTIONAL ))) -swiotlb_bounce (orig_addr, tlb_addr, size,DMA_FROM_DEVICE ); +swiotlb_bounce (orig_addr, tlb_addr, mapping_size,DMA_FROM_DEVICE );/* * Return the buffer to the free list by setting the corresponding @@ -665,14 +673,14 @@ bool swiotlb_map(struct device *dev, phys_addr_t *phys, dma_addr_t *dma_addr,/* Oh well, have to allocate and map a bounce buffer. */ *phys =swiotlb_tbl_map_single (dev,__phys_to_dma (dev, io_tlb_start), - *phys, size, dir, attrs); + *phys, size, size, dir, attrs);if (*phys == (phys_addr_t )DMA_MAPPING_ERROR )return false;/* Ensure that the address returned is DMA'ble */ *dma_addr =__phys_to_dma (dev, *phys);if (unlikely (!dma_capable (dev, *dma_addr, size))) { -swiotlb_tbl_unmap_single (dev, *phys, size, dir, +swiotlb_tbl_unmap_single (dev, *phys, size, size, dir, attrs |DMA_ATTR_SKIP_CPU_SYNC );return false; }Signature · 1 line
2.17.1
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [PATCH v9 1/5] swiotlb: Split size parameter to map/unmap APIs
Hi,
Quoted 7 lines · Konrad Rzeszutek Wilk
Quoted 4 lines · Lu Baolu
This splits the size parameter to
swiotlb_tbl_map_single()andswiotlb_tbl_unmap_single()into analloc_sizeand amapping_sizeparameter, where the latter one is rounded up to the iommu page size.It does a bit more too. You have the
WARN_ON. Can you make it be
more verbose (as in details of which device requested it) and also useprintk_onceor so please?
How about this change?
kernel/dma/swiotlb.c +0 -0
@@ -466,8 +466,11 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev, pr_warn_once("%s is active and system is using DMA
bounce buffers\n",
sme_active() ? "SME" : "SEV");
- if (WARN_ON(mapping_size > alloc_size))
+ if (mapping_size > alloc_size) {
+ dev_warn_once(hwdev, "Invalid sizes (mapping: %zd bytes, alloc: %zd bytes)",
+ mapping_size, alloc_size);
return (phys_addr_t)DMA_MAPPING_ERROR;+ }
mask = dma_get_seg_boundary(hwdev);
@@ -584,9 +587,6 @@ void swiotlb_tbl_unmap_single(struct device *hwdev, phys_addr_t tlb_addr,
int index = (tlb_addr - io_tlb_start) >> IO_TLB_SHIFT;
phys_addr_t orig_addr = io_tlb_orig_addr[index];- if (WARN_ON(mapping_size > alloc_size))
- return;
-
/*
* First, sync the memory before unmapping the entry
*/Best regards,
Baolu
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
Joerg Roedel
maintainerRe: [PATCH v9 1/5] swiotlb: Split size parameter to map/unmap APIs
Quoted 32 lines · Lu Baolu
How about this change?
kernel/dma/swiotlb.c +4
-1@@ -466,8 +466,11 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,pr_warn_once ("%s is active and system is using DMA bounce buffers\n",sme_active () ?"SME" :"SEV" ); -if (WARN_ON (mapping_size > alloc_size)) +if (mapping_size > alloc_size) { +dev_warn_once (hwdev,"Invalid sizes (mapping: %zd bytes, alloc: %zd bytes)", + mapping_size, alloc_size);return (phys_addr_t )DMA_MAPPING_ERROR ; + }mask = dma_get_seg_boundary(hwdev);kernel/dma/swiotlb.c +0
-3@@ -584,9 +587,6 @@ void swiotlb_tbl_unmap_single(struct device *hwdev,phys_addr_t tlb_addr, int index = (tlb_addr - io_tlb_start) >> IO_TLB_SHIFT;phys_addr_t orig_addr = io_tlb_orig_addr[index]; -if (WARN_ON (mapping_size > alloc_size)) -return ; -/* * First, sync the memory before unmapping the entry
Quoted 1 line
*/
Folded that into the commit, thanks Lu Baolu.
PATCH v9 2/5 iommu/vt-d: Check whether device requires bounce buffer
In reply to Lu BaoluThis adds a helper to check whether a device needs to use bounce buffer. It also provides a boot time option to disable the bounce buffer. Users can use this to prevent the iommu driver from using the bounce buffer for performance gain.
--- Documentation/admin-guide/kernel-parameters.txt | 5 +++++ drivers/iommu/intel-iommu.c | 7 +++++++ 2 files changed, 12 insertions(+)
Documentation/admin-guide/kernel-parameters.txt +5 -0
@@ -1732,6 +1732,11 @@ Note that using this option lowers the security provided by tboot because it makes the system vulnerable to DMA attacks. + nobounce [Default off] + Disable bounce buffer for unstrusted devices such as + the Thunderbolt devices. This will treat the untrusted + devices as the trusted ones, hence might expose security + risks of DMA attacks. intel_idle.max_cstate= [KNL,HW,ACPI,X86] 0 disables intel_idle and fall back on acpi_idle.
drivers/iommu/intel-iommu.c +7 -0
@@ -362,6 +362,7 @@ static int dmar_forcedac;static int intel_iommu_strict;static int intel_iommu_superpage =1 ;static int iommu_identity_mapping; +static int intel_no_bounce;#define IDENTMAP_ALL 1#define IDENTMAP_GFX 2
@@ -375,6 +376,9 @@ EXPORT_SYMBOL_GPL(intel_iommu_gfx_mapped);static DEFINE_SPINLOCK (device_domain_lock);static LIST_HEAD (device_domain_list); +#define device_needs_bounce (d) (!intel_no_bounce && dev_is_pci(d) && \ + to_pci_dev(d)->untrusted) +/* * Iterate over elements in device_domain_list and call the specified * callback @fn against each element.
@@ -457,6 +461,9 @@ static int __init intel_iommu_setup(char *str)printk (KERN_INFO "Intel-IOMMU: not forcing on after tboot. This could expose security risk for tboot\n" ); intel_iommu_tboot_noforce =1 ; + }else if (!strncmp (str,"nobounce" ,8 )) { +pr_info ("Intel-IOMMU: No bounce buffer. This could expose security risks of DMA attacks\n" ); + intel_no_bounce =1 ; } str +=strcspn (str,"," );
Signature · 6 lines
2.17.1 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
PATCH v9 3/5 iommu/vt-d: Don't switch off swiotlb if bounce page is used
In reply to Lu BaoluThe bounce page implementation depends on swiotlb. Hence, don't switch off swiotlb if the system has untrusted devices or could potentially be hot-added with any untrusted devices.
--- drivers/iommu/Kconfig | 1 + drivers/iommu/intel-iommu.c | 32 +++++++++++++++++--------------- 2 files changed, 18 insertions(+), 15 deletions(-)
drivers/iommu/Kconfig +1 -0
@@ -182,6 +182,7 @@ config INTEL_IOMMU select IOMMU_IOVA select NEED_DMA_MAP_STATE select DMAR_TABLE + select SWIOTLB help DMA remapping (DMAR) devices support enables independent address translations for Direct Memory Access (DMA) from devices.
drivers/iommu/intel-iommu.c +17 -15
@@ -4576,22 +4576,20 @@ const struct attribute_group *intel_iommu_groups[] = { NULL, }; -static int __init platform_optin_force_iommu (void ) +static inline bool has_untrusted_dev (void ) {struct pci_dev *pdev =NULL ; -bool has_untrusted_dev = false; -if (!dmar_platform_optin () || no_platform_optin) -return 0 ; +for_each_pci_dev (pdev) +if (pdev->untrusted) +return true; -for_each_pci_dev (pdev) { -if (pdev->untrusted) { - has_untrusted_dev = true; -break ; - } - } +return false; +} -if (!has_untrusted_dev) +static int __init platform_optin_force_iommu (void ) +{ +if (!dmar_platform_optin () || no_platform_optin || !has_untrusted_dev ())return 0 ;if (no_iommu || dmar_disabled)
@@ -4605,9 +4603,6 @@ static int __init platform_optin_force_iommu(void) iommu_identity_mapping |=IDENTMAP_ALL ; dmar_disabled =0 ; -#if defined(CONFIG_X86 ) && defined(CONFIG_SWIOTLB ) - swiotlb =0 ; -#endif no_iommu =0 ;return 1 ;
@@ -4747,7 +4742,14 @@ int __init intel_iommu_init(void)up_write (&dmar_global_lock);#if defined(CONFIG_X86 ) && defined(CONFIG_SWIOTLB ) - swiotlb =0 ; +/* +* If the system has no untrusted device or the user has decided +* to disable the bounce page mechanisms, we don't need swiotlb. +* Mark this and the pre-allocated bounce pages will be released +* later. +*/ +if (!has_untrusted_dev () || intel_no_bounce) + swiotlb =0 ;#endif dma_ops = &intel_dma_ops;
Signature · 6 lines
2.17.1 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
PATCH v9 4/5 iommu/vt-d: Add trace events for device dma map/unmap
In reply to Lu BaoluThis adds trace support for the Intel IOMMU driver. It also declares some events which could be used to trace the events when an IOVA is being mapped or unmapped in a domain.
--- drivers/iommu/Makefile | 1 + drivers/iommu/intel-iommu.c | 13 +++- drivers/iommu/intel-trace.c | 14 ++++ include/trace/events/intel_iommu.h | 106 +++++++++++++++++++++++++++++ 4 files changed, 131 insertions(+), 3 deletions(-) create mode 100644 drivers/iommu/intel-trace.c create mode 100644 include/trace/events/intel_iommu.h
drivers/iommu/Makefile +1 -0
@@ -17,6 +17,7 @@ obj-$(CONFIG_ARM_SMMU) += arm-smmu.o obj-$(CONFIG_ARM_SMMU_V3) += arm-smmu-v3.o obj-$(CONFIG_DMAR_TABLE) += dmar.o obj-$(CONFIG_INTEL_IOMMU) += intel-iommu.o intel-pasid.o +obj-$(CONFIG_INTEL_IOMMU) += intel-trace.o obj-$(CONFIG_INTEL_IOMMU_DEBUGFS) += intel-iommu-debugfs.o obj-$(CONFIG_INTEL_IOMMU_SVM) += intel-svm.o obj-$(CONFIG_IPMMU_VMSA) += ipmmu-vmsa.o
drivers/iommu/intel-iommu.c +10 -3
@@ -3541,6 +3541,9 @@ static dma_addr_t __intel_map_single(struct device *dev, phys_addr_t paddr, start_paddr = (phys_addr_t )iova_pfn <<PAGE_SHIFT ; start_paddr += paddr & ~PAGE_MASK ; + +trace_map_single (dev, start_paddr, paddr, size <<VTD_PAGE_SHIFT ); +return start_paddr; error:
@@ -3596,10 +3599,7 @@ static void intel_unmap(struct device *dev, dma_addr_t dev_addr, size_t size)if (dev_is_pci (dev)) pdev =to_pci_dev (dev); -dev_dbg (dev,"Device unmapping: pfn %lx-%lx\n" , start_pfn, last_pfn); - freelist =domain_unmap (domain, start_pfn, last_pfn); -if (intel_iommu_strict || (pdev && pdev->untrusted) || !has_iova_flush_queue (&domain->iovad)) { iommu_flush_iotlb_psi(iommu, domain, start_pfn,
@@ -3615,6 +3615,8 @@ static void intel_unmap(struct device *dev, dma_addr_t dev_addr, size_t size)* cpu used up by the iotlb flush operation... */ } + +trace_unmap_single (dev, dev_addr, size); } static void intel_unmap_page(struct device *dev, dma_addr_t dev_addr,
@@ -3705,6 +3707,8 @@ static void intel_unmap_sg(struct device *dev, struct scatterlist *sglist, }intel_unmap (dev, startaddr, nrpages <<VTD_PAGE_SHIFT ); + +trace_unmap_sg (dev, startaddr, nrpages <<VTD_PAGE_SHIFT ); } static int intel_map_sg(struct device *dev, struct scatterlist *sglist, int nelems,
@@ -3761,6 +3765,9 @@ static int intel_map_sg(struct device *dev, struct scatterlist *sglist, int nelereturn 0 ; } +trace_map_sg (dev, iova_pfn <<PAGE_SHIFT , +sg_phys (sglist), size <<VTD_PAGE_SHIFT ); +return nelems; }
drivers/iommu/intel-trace.c new file +14 -0
@@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Intel IOMMU trace support +* +* Copyright (C) 2019 Intel Corporation +* +* Author: Lu Baolu <[email protected]> +*/ + +#include <linux/string.h> +#include <linux/types.h> + +#define CREATE_TRACE_POINTS +#include <trace/events/intel_iommu.h>
include/trace/events/intel_iommu.h new file +106 -0
106 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH v9 5/5 iommu/vt-d: Use bounce buffer for untrusted devices
In reply to Lu BaoluThe Intel VT-d hardware uses paging for DMA remapping. The minimum mapped window is a page size. The device drivers may map buffers not filling the whole IOMMU window. This allows the device to access to possibly unrelated memory and a malicious device could exploit this to perform DMA attacks. To address this, the Intel IOMMU driver will use bounce pages for those buffers which don't fill whole IOMMU pages.
--- drivers/iommu/intel-iommu.c | 258 ++++++++++++++++++++++++++++++++++++ 1 file changed, 258 insertions(+)
drivers/iommu/intel-iommu.c +258 -0
@@ -41,9 +41,11 @@#include <linux/dma-direct.h> #include <linux/crash_dump.h> #include <linux/numa.h> +#include <linux/swiotlb.h> #include <asm/irq_remapping.h> #include <asm/cacheflush.h> #include <asm/iommu.h> +#include <trace/events/intel_iommu.h> #include "irq_remapping.h" #include "intel-pasid.h"
@@ -346,6 +348,8 @@ static int domain_detach_iommu(struct dmar_domain *domain,static bool device_is_rmrr_locked (struct device *dev);static int intel_iommu_attach_device (struct iommu_domain *domain,struct device *dev); +static phys_addr_t intel_iommu_iova_to_phys (struct iommu_domain *domain, +dma_addr_t iova);#ifdef CONFIG_INTEL_IOMMU_DEFAULT_ON int dmar_disabled =0 ;
@@ -3783,6 +3787,252 @@ static const struct dma_map_ops intel_dma_ops = { .dma_supported = dma_direct_supported, }; +static void +bounce_sync_single (struct device *dev,dma_addr_t addr,size_t size, +enum dma_data_direction dir,enum dma_sync_target target) +{ +struct dmar_domain *domain; +phys_addr_t tlb_addr; + + domain =find_domain (dev); +if (WARN_ON (!domain)) +return ; + + tlb_addr =intel_iommu_iova_to_phys (&domain->domain, addr); +if (is_swiotlb_buffer (tlb_addr)) +swiotlb_tbl_sync_single (dev, tlb_addr, size, dir, target); +} + +static dma_addr_t +bounce_map_single (struct device *dev,phys_addr_t paddr,size_t size, +enum dma_data_direction dir,unsigned long attrs, +u64 dma_mask) +{ +size_t aligned_size =ALIGN (size,VTD_PAGE_SIZE ); +struct dmar_domain *domain; +struct intel_iommu *iommu; +unsigned long iova_pfn; +unsigned long nrpages; +phys_addr_t tlb_addr; +int prot =0 ; +int ret; + + domain =find_domain (dev); +if (WARN_ON (dir ==DMA_NONE || !domain)) +return DMA_MAPPING_ERROR ; + + iommu =domain_get_iommu (domain); +if (WARN_ON (!iommu)) +return DMA_MAPPING_ERROR ; + + nrpages =aligned_nrpages (0 , size); + iova_pfn =intel_alloc_iova (dev, domain, +dma_to_mm_pfn (nrpages), dma_mask); +if (!iova_pfn) +return DMA_MAPPING_ERROR ; + +/* +* Check if DMAR supports zero-length reads on write only +* mappings.. +*/ +if (dir ==DMA_TO_DEVICE || dir ==DMA_BIDIRECTIONAL || + !cap_zlr (iommu->cap)) + prot |=DMA_PTE_READ ; +if (dir ==DMA_FROM_DEVICE || dir ==DMA_BIDIRECTIONAL ) + prot |=DMA_PTE_WRITE ; + +/* +* If both the physical buffer start address and size are +* page aligned, we don't need to use a bounce page. +*/ +if (!IS_ALIGNED (paddr | size,VTD_PAGE_SIZE )) { + tlb_addr =swiotlb_tbl_map_single (dev, +__phys_to_dma (dev, io_tlb_start), + paddr, size, aligned_size, dir, attrs); +if (tlb_addr ==DMA_MAPPING_ERROR ) { + goto swiotlb_error; + }else { +/* Cleanup the padding area. */ +void *padding_start =phys_to_virt (tlb_addr); +size_t padding_size = aligned_size; + +if (!(attrs &DMA_ATTR_SKIP_CPU_SYNC ) && + (dir ==DMA_TO_DEVICE || + dir ==DMA_BIDIRECTIONAL )) { + padding_start += size; + padding_size -= size; + } + +memset (padding_start,0 , padding_size); + } + }else { + tlb_addr = paddr; + } + + ret =domain_pfn_mapping (domain,mm_to_dma_pfn (iova_pfn), + tlb_addr >>VTD_PAGE_SHIFT , nrpages, prot); +if (ret) + goto mapping_error; + +trace_bounce_map_single (dev, iova_pfn <<PAGE_SHIFT , paddr, size); + +return (phys_addr_t )iova_pfn <<PAGE_SHIFT ; + +mapping_error: +if (is_swiotlb_buffer (tlb_addr)) +swiotlb_tbl_unmap_single (dev, tlb_addr, size, + aligned_size, dir, attrs); +swiotlb_error: +free_iova_fast (&domain->iovad, iova_pfn,dma_to_mm_pfn (nrpages)); +dev_err (dev,"Device bounce map: %zx@%llx dir %d --- failed\n" , + size, (unsigned long long )paddr, dir); + +return DMA_MAPPING_ERROR ; +} + +static void +bounce_unmap_single (struct device *dev,dma_addr_t dev_addr,size_t size, +enum dma_data_direction dir,unsigned long attrs) +{ +size_t aligned_size =ALIGN (size,VTD_PAGE_SIZE ); +struct dmar_domain *domain; +phys_addr_t tlb_addr; + + domain =find_domain (dev); +if (WARN_ON (!domain)) +return ; + + tlb_addr =intel_iommu_iova_to_phys (&domain->domain, dev_addr); +if (WARN_ON (!tlb_addr)) +return ; + +intel_unmap (dev, dev_addr, size); +if (is_swiotlb_buffer (tlb_addr)) +swiotlb_tbl_unmap_single (dev, tlb_addr, size, + aligned_size, dir, attrs); + +trace_bounce_unmap_single (dev, dev_addr, size); +} + +static dma_addr_t +bounce_map_page (struct device *dev,struct page *page,unsigned long offset, +size_t size,enum dma_data_direction dir,unsigned long attrs) +{ +return bounce_map_single (dev,page_to_phys (page) + offset, + size, dir, attrs, *dev->dma_mask); +} + +static dma_addr_t +bounce_map_resource (struct device *dev,phys_addr_t phys_addr,size_t size, +enum dma_data_direction dir,unsigned long attrs) +{ +return bounce_map_single (dev, phys_addr, size, + dir, attrs, *dev->dma_mask); +} + +static void +bounce_unmap_page (struct device *dev,dma_addr_t dev_addr,size_t size, +enum dma_data_direction dir,unsigned long attrs) +{ +bounce_unmap_single (dev, dev_addr, size, dir, attrs); +} + +static void +bounce_unmap_resource (struct device *dev,dma_addr_t dev_addr,size_t size, +enum dma_data_direction dir,unsigned long attrs) +{ +bounce_unmap_single (dev, dev_addr, size, dir, attrs); +} + +static void +bounce_unmap_sg (struct device *dev,struct scatterlist *sglist,int nelems, +enum dma_data_direction dir,unsigned long attrs) +{ +struct scatterlist *sg; +int i; + +for_each_sg (sglist, sg, nelems, i) +bounce_unmap_page (dev, sg->dma_address, +sg_dma_len (sg), dir, attrs); +} + +static int +bounce_map_sg (struct device *dev,struct scatterlist *sglist,int nelems, +enum dma_data_direction dir,unsigned long attrs) +{ +int i; +struct scatterlist *sg; + +for_each_sg (sglist, sg, nelems, i) { + sg->dma_address =bounce_map_page (dev,sg_page (sg), + sg->offset, sg->length, + dir, attrs); +if (sg->dma_address ==DMA_MAPPING_ERROR ) + goto out_unmap; +sg_dma_len (sg) = sg->length; + } + +return nelems; + +out_unmap: +bounce_unmap_sg (dev, sglist, i, dir, attrs |DMA_ATTR_SKIP_CPU_SYNC ); +return 0 ; +} + +static void +bounce_sync_single_for_cpu (struct device *dev,dma_addr_t addr, +size_t size,enum dma_data_direction dir) +{ +bounce_sync_single (dev, addr, size, dir,SYNC_FOR_CPU ); +} + +static void +bounce_sync_single_for_device (struct device *dev,dma_addr_t addr, +size_t size,enum dma_data_direction dir) +{ +bounce_sync_single (dev, addr, size, dir,SYNC_FOR_DEVICE ); +} + +static void +bounce_sync_sg_for_cpu (struct device *dev,struct scatterlist *sglist, +int nelems,enum dma_data_direction dir) +{ +struct scatterlist *sg; +int i; + +for_each_sg (sglist, sg, nelems, i) +bounce_sync_single (dev,sg_dma_address (sg), +sg_dma_len (sg), dir,SYNC_FOR_CPU ); +} + +static void +bounce_sync_sg_for_device (struct device *dev,struct scatterlist *sglist, +int nelems,enum dma_data_direction dir) +{ +struct scatterlist *sg; +int i; + +for_each_sg (sglist, sg, nelems, i) +bounce_sync_single (dev,sg_dma_address (sg), +sg_dma_len (sg), dir,SYNC_FOR_DEVICE ); +} + +static const struct dma_map_ops bounce_dma_ops = { + .alloc = intel_alloc_coherent, + .free = intel_free_coherent, + .map_sg = bounce_map_sg, + .unmap_sg = bounce_unmap_sg, + .map_page = bounce_map_page, + .unmap_page = bounce_unmap_page, + .sync_single_for_cpu = bounce_sync_single_for_cpu, + .sync_single_for_device = bounce_sync_single_for_device, + .sync_sg_for_cpu = bounce_sync_sg_for_cpu, + .sync_sg_for_device = bounce_sync_sg_for_device, + .map_resource = bounce_map_resource, + .unmap_resource = bounce_unmap_resource, + .dma_supported = dma_direct_supported, +}; +static inline int iommu_domain_cache_init (void ) {int ret =0 ;
@@ -5376,6 +5626,11 @@ static int intel_iommu_add_device(struct device *dev) } } +if (device_needs_bounce (dev)) { +dev_info (dev,"Use Intel IOMMU bounce page dma_ops\n" ); +set_dma_ops (dev, &bounce_dma_ops); + } +return 0 ; }
@@ -5393,6 +5648,9 @@ static void intel_iommu_remove_device(struct device *dev)iommu_group_remove_device (dev);iommu_device_unlink (&iommu->iommu, dev); + +if (device_needs_bounce (dev)) +set_dma_ops (dev,NULL ); } static void intel_iommu_get_resv_regions(struct device *device,
Signature · 1 line
2.17.1
Quoted 7 lines · Lu Baolu
Lu Baolu (5):
swiotlb: Split size parameter to map/unmap APIs iommu/vt-d: Check whether device requires bounce buffer iommu/vt-d: Don't switch off swiotlb if bounce page is used iommu/vt-d: Add trace events for device dma map/unmap iommu/vt-d: Use bounce buffer for untrusted devices
Quoted 13 lines
.../admin-guide/kernel-parameters.txt | 5 + drivers/iommu/Kconfig | 1 + drivers/iommu/Makefile | 1 + drivers/iommu/intel-iommu.c | 310 +++++++++++++++++- drivers/iommu/intel-trace.c | 14 + drivers/xen/swiotlb-xen.c | 8 +- include/linux/swiotlb.h | 8 +- include/trace/events/intel_iommu.h | 106 ++++++ kernel/dma/direct.c | 2 +- kernel/dma/swiotlb.c | 30 +- 10 files changed, 449 insertions(+), 36 deletions(-) create mode 100644 drivers/iommu/intel-trace.c create mode 100644 include/trace/events/intel_iommu.h
Applied, thanks.
Quoted 22 lines · Joerg Roedel
Quoted 7 lines · Lu Baolu
Lu Baolu (5):
swiotlb: Split size parameter to map/unmap APIs iommu/vt-d: Check whether device requires bounce buffer iommu/vt-d: Don't switch off swiotlb if bounce page is used iommu/vt-d: Add trace events for device dma map/unmap iommu/vt-d: Use bounce buffer for untrusted devicesQuoted 13 lines
.../admin-guide/kernel-parameters.txt | 5 + drivers/iommu/Kconfig | 1 + drivers/iommu/Makefile | 1 + drivers/iommu/intel-iommu.c | 310 +++++++++++++++++- drivers/iommu/intel-trace.c | 14 + drivers/xen/swiotlb-xen.c | 8 +- include/linux/swiotlb.h | 8 +- include/trace/events/intel_iommu.h | 106 ++++++ kernel/dma/direct.c | 2 +- kernel/dma/swiotlb.c | 30 +- 10 files changed, 449 insertions(+), 36 deletions(-) create mode 100644 drivers/iommu/intel-trace.c create mode 100644 include/trace/events/intel_iommu.h
Quoted 1 line
Applied, thanks.
Please un-apply the swiotlb until the WARN_ON gets fixed. Or alternatively squash the fix once that is done.
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu