ARM: omap2plus_defconfig: Fix missing video
Subsystems (3)
PATCH 1/3 ARM: omap2plus_defconfig: Fix missing video
When the panel-dpi driver was removed, the simple-panels driver was never enabled, so anyone who used the panel-dpi driver lost video, and those who used it inconjunction with simple-panels would have to manually enable CONFIG_DRM_PANEL_SIMPLE.
This patch makes CONFIG_DRM_PANEL_SIMPLE a module in the same way the deprecated panel-dpi was.
arch/arm/configs/omap2plus_defconfig +1 -0
@@ -363,6 +363,7 @@ CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1=m CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=m CONFIG_DRM_TILCDC=m +CONFIG_DRM_PANEL_SIMPLE=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y
Signature · 1 line
2.17.1
PATCH 2/3 ARM: dts: logicpd-torpedo-baseboard: Fix missing video
A previous commit removed the panel-dpi driver, which made the Torpedo video stop working because it relied on the dpi driver for setting video timings. Now that the simple-panel driver is available in omap2plus, this patch migrates the Torpedo dev kits to use a similar panel and remove the manual timing requirements.
arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi +6 -31
@@ -108,7 +108,6 @@ &dss { status = "ok"; vdds_dsi-supply = <&vpll2>; - vdda_video-supply = <&video_reg>; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins1>; port {
@@ -124,44 +123,20 @@ display0 = &lcd0; }; - video_reg: video_reg { - pinctrl-names = "default"; - pinctrl-0 = <&panel_pwr_pins>; - compatible = "regulator-fixed"; - regulator-name = "fixed-supply"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ - }; - lcd0: display { - compatible = "panel-dpi"; + /* This isn't the exact LCD, but the timings meet spec */ + /* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */ + compatible = "newhaven,nhd-4.3-480272ef-atxl"; label = "15"; - status = "okay"; - /* default-on; */ pinctrl-names = "default"; - + pinctrl-0 = <&panel_pwr_pins>; + backlight = <&bl>; + enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; port { lcd_in: endpoint { remote-endpoint = <&dpi_out>; }; }; - - panel-timing { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <3>; - hback-porch = <2>; - hsync-len = <42>; - vback-porch = <3>; - vfront-porch = <4>; - vsync-len = <11>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; }; bl: backlight {
Signature · 1 line
2.17.1
PATCH 3/3 ARM: dts: am3517-evm: Fix missing video
In reply to Adam FordA previous commit removed the panel-dpi driver, which made the video on the AM3517-evm stop working because it relied on the dpi driver for setting video timings. Now that the simple-panel driver is available in omap2plus, this patch migrates the am3517-evm to use a similar panel and remove the manual timing requirements.
arch/arm/boot/dts/am3517-evm.dts +4 -19
@@ -124,10 +124,11 @@ }; lcd0: display@0 { - compatible = "panel-dpi"; + /* This isn't the exact LCD, but the timings meet spec */ + /* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */ + compatible = "newhaven,nhd-4.3-480272ef-atxl"; label = "15"; - status = "okay"; - pinctrl-names = "default"; + backlight = <&bl>; enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; /* gpio176, lcd INI */ vcc-supply = <&vdd_io_reg>;
@@ -136,22 +137,6 @@ remote-endpoint = <&dpi_out>; }; }; - - panel-timing { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <3>; - hback-porch = <2>; - hsync-len = <42>; - vback-porch = <3>; - vfront-porch = <4>; - vsync-len = <11>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; }; bl: backlight {
Signature · 1 line
2.17.1
Tony Lindgren
maintainerQuoted 9 lines · Adam Ford
When the panel-dpi driver was removed, the simple-panels driver was never enabled, so anyone who used the panel-dpi driver lost video, and those who used it inconjunction with simple-panels would have to manually enable
CONFIG_DRM_PANEL_SIMPLE.This patch makes
CONFIG_DRM_PANEL_SIMPLEa module in the same way the deprecated panel-dpi was.Fixes 8bf4b1621178 ("drm/omap: Remove panel-dpi driver")
Applying all three into fixes. Not going to send out a pull request for the fixes until next week so it may not land until after the merge window starts. But looks like these have been broken since 2018, so not super urgent.
Regards,
Tony