Skip to contentSkip to conversation

powerpc/xmon: Improve output of XIVE commands

PATCH In review Cédric Le Goater 2 participants 4 messages Sep 10, 2019 – Sep 19, 2019 PowerPC

lore
Share & tools
lore
#0 lore raw

cover powerpc/xmon: Improve output of XIVE commands

Hello,

This series extend the interrupt command output with the PQ bit value and reworks the CPU command output to check that a CPU is started.

Thanks,

C.

Cédric Le Goater (2):
powerpc/xmon: Improve output of XIVE interrupts
powerpc/xmon: Fix output of XIVE IPI

 arch/powerpc/include/asm/xive.h   |  3 +-
 arch/powerpc/sysdev/xive/common.c | 56 +++++++++++++++++++++++--------
 arch/powerpc/xmon/xmon.c          | 15 +++------
 3 files changed, 47 insertions(+), 27 deletions(-)
Signature · 1 line
2.21.0
#1 lore raw

PATCH 1/2 powerpc/xmon: Improve output of XIVE interrupts

When looping on the list of interrupts, add the current value of the PQ bits with a load on the ESB page. This has the side effect of faulting the ESB page of all interrupts.

---
 arch/powerpc/include/asm/xive.h   |  3 +--
 arch/powerpc/sysdev/xive/common.c | 29 ++++++++++++++++++++++++++---
 arch/powerpc/xmon/xmon.c          | 15 ++++-----------
 3 files changed, 31 insertions(+), 16 deletions(-)
arch/powerpc/include/asm/xive.h +1 -2
index 967d6ab3c977..71f52f22c36b 100644
@@ -99,8 +99,7 @@ extern void xive_flush_interrupt(void);
 
 /* xmon hook */
 extern void xmon_xive_do_dump(int cpu);
-extern int xmon_xive_get_irq_config(u32 irq, u32 *target, u8 *prio,
-				    u32 *sw_irq);
+extern int xmon_xive_get_irq_config(u32 hw_irq, struct irq_data *d);
 
 /* APIs used by KVM */
 extern u32 xive_native_default_eq_shift(void);
arch/powerpc/sysdev/xive/common.c +26 -3
index ed4561e71951..85a27ec49d34 100644
@@ -258,10 +258,33 @@ notrace void xmon_xive_do_dump(int cpu)
 #endif
 }
 
-int xmon_xive_get_irq_config(u32 irq, u32 *target, u8 *prio,
-			     u32 *sw_irq)
+int xmon_xive_get_irq_config(u32 hw_irq, struct irq_data *d)
 {
-	return xive_ops->get_irq_config(irq, target, prio, sw_irq);
+	int rc;
+	u32 target;
+	u8 prio;
+	u32 lirq;
+
+	rc = xive_ops->get_irq_config(hw_irq, &target, &prio, &lirq);
+	if (rc) {
+		xmon_printf("IRQ 0x%08x : no config rc=%d\n", hw_irq, rc);
+		return rc;
+	}
+
+	xmon_printf("IRQ 0x%08x : target=0x%x prio=%02x lirq=0x%x ",
+		    hw_irq, target, prio, lirq);
+
+	if (d) {
+		struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
+		u64 val = xive_esb_read(xd, XIVE_ESB_GET);
+
+		xmon_printf("PQ=%c%c",
+			    val & XIVE_ESB_VAL_P ? 'P' : '-',
+			    val & XIVE_ESB_VAL_Q ? 'Q' : '-');
+	}
+
+	xmon_printf("\n");
+	return 0;
 }
 
 #endif /* CONFIG_XMON */
arch/powerpc/xmon/xmon.c +4 -11
index dc9832e06256..d83364ebc5c5 100644
@@ -2572,16 +2572,9 @@ static void dump_all_xives(void)
 		dump_one_xive(cpu);
 }
 
-static void dump_one_xive_irq(u32 num)
+static void dump_one_xive_irq(u32 num, struct irq_data *d)
 {
-	int rc;
-	u32 target;
-	u8 prio;
-	u32 lirq;
-
-	rc = xmon_xive_get_irq_config(num, &target, &prio, &lirq);
-	xmon_printf("IRQ 0x%08x : target=0x%x prio=%d lirq=0x%x (rc=%d)\n",
-		    num, target, prio, lirq, rc);
+	xmon_xive_get_irq_config(num, d);
 }
 
 static void dump_all_xive_irq(void)
@@ -2599,7 +2592,7 @@ static void dump_all_xive_irq(void)
 		hwirq = (unsigned int)irqd_to_hwirq(d);
 		/* IPIs are special (HW number 0) */
 		if (hwirq)
-			dump_one_xive_irq(hwirq);
+			dump_one_xive_irq(hwirq, d);
 	}
 }
 
@@ -2619,7 +2612,7 @@ static void dump_xives(void)
 		return;
 	} else if (c == 'i') {
 		if (scanhex(&num))
-			dump_one_xive_irq(num);
+			dump_one_xive_irq(num, NULL);
 		else
 			dump_all_xive_irq();
 		return;
Signature · 1 line
2.21.0
#2 lore raw

Re: [PATCH 1/2] powerpc/xmon: Improve output of XIVE interrupts

Quoted 5 lines · On Tue, 2019-09-10 at 08:18:49 UTC, =?UTF-8?q?C=C3=A9dric=20Le=20Goater?= wrote:

When looping on the list of interrupts, add the current value of the PQ bits with a load on the ESB page. This has the side effect of faulting the ESB page of all interrupts.

Series applied to powerpc next, thanks.

https://git.kernel.org/powerpc/c/5896163f7f91c0560cc41908c808661eee4c4121

cheers

#3 lore raw

PATCH 2/2 powerpc/xmon: Fix output of XIVE IPI

In reply to Cédric Le Goater

When dumping the XIVE state of an CPU IPI, xmon does not check if the CPU is started or not which can cause an error. Add a check for that and change the output to be on one line just as the XIVE interrupts of the machine.

---
 arch/powerpc/sysdev/xive/common.c | 27 ++++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)
arch/powerpc/sysdev/xive/common.c +16 -11
index 85a27ec49d34..20f45b8a52ab 100644
@@ -237,25 +237,30 @@ static notrace void xive_dump_eq(const char *name, struct xive_q *q)
 	i0 = be32_to_cpup(q->qpage + idx);
 	idx = (idx + 1) & q->msk;
 	i1 = be32_to_cpup(q->qpage + idx);
-	xmon_printf("  %s Q T=%d %08x %08x ...\n", name,
-		    q->toggle, i0, i1);
+	xmon_printf("%s idx=%d T=%d %08x %08x ...", name,
+		     q->idx, q->toggle, i0, i1);
 }
 
 notrace void xmon_xive_do_dump(int cpu)
 {
 	struct xive_cpu *xc = per_cpu(xive_cpu, cpu);
 
-	xmon_printf("XIVE state for CPU %d:\n", cpu);
-	xmon_printf("  pp=%02x cppr=%02x\n", xc->pending_prio, xc->cppr);
-	xive_dump_eq("IRQ", &xc->queue[xive_irq_priority]);
+	xmon_printf("CPU %d:", cpu);
+	if (xc) {
+		xmon_printf("pp=%02x CPPR=%02x ", xc->pending_prio, xc->cppr);
+
 #ifdef CONFIG_SMP
-	{
-		u64 val = xive_esb_read(&xc->ipi_data, XIVE_ESB_GET);
-		xmon_printf("  IPI state: %x:%c%c\n", xc->hw_ipi,
-			val & XIVE_ESB_VAL_P ? 'P' : 'p',
-			val & XIVE_ESB_VAL_Q ? 'Q' : 'q');
-	}
+		{
+			u64 val = xive_esb_read(&xc->ipi_data, XIVE_ESB_GET);
+
+			xmon_printf("IPI=0x%08x PQ=%c%c ", xc->hw_ipi,
+				    val & XIVE_ESB_VAL_P ? 'P' : '-',
+				    val & XIVE_ESB_VAL_Q ? 'Q' : '-');
+		}
 #endif
+		xive_dump_eq("EQ", &xc->queue[xive_irq_priority]);
+	}
+	xmon_printf("\n");
 }
 
 int xmon_xive_get_irq_config(u32 hw_irq, struct irq_data *d)
Signature · 1 line
2.21.0