Skip to contentSkip to conversation

ath10k: add reorder and change PN check logic for mac80211

PATCH In review Wen Gong 2 participants 3 messages Aug 21, 2019 – Sep 10, 2019 Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore

Wen Gong

author
#0 lore raw

PATCH 1/1 ath10k: add reorder and change PN check logic for mac80211

For sdio chip, if the rssi is not good, then it have some retry, firmware will indicate the msdu list of a ppdu with a hole, it means it lost the hole msdu, after the msdu retry from AP, the hole msdu will indicate from firmware later. The hole msdu's PN check will fail and the hole msdu will be dropped.

PN check fail example:
Sequence number PN number PN check status

     3814         6101         success
     3815         6102         success
     3816         6103         success
     3818         6105         success
     3819         6106         success
     3820         6107         success
     3817         6104         fail

The correct logic is reorder the msdu list and then do PN check. ieee80211_rx_reorder_ampdu of mac80211 will do the reorer logic and then do PN check in ieee80211_rx_h_decrypt of mac80211.

example after reorder:
Sequence number PN number PN check status

     3814         6101         success
     3815         6102         success
     3816         6103         success
     3817         6104         success
     3818         6105         success
     3819         6106         success
     3820         6107         success

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00017-QCARMSWP-1.

---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 91 +++++++++++++++++++++++++++++++-
 1 file changed, 89 insertions(+), 2 deletions(-)
drivers/net/wireless/ath/ath10k/htt_rx.c +89 -2
index 83a7fb6..53f1095 100644
@@ -2151,6 +2151,10 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct ath10k_htt *htt,
 	struct ath10k_peer *peer;
 	struct htt_rx_indication_mpdu_range *mpdu_ranges;
 	struct fw_rx_desc_hl *fw_desc;
+	enum htt_txrx_sec_cast_type sec_index;
+	enum htt_security_types sec_type;
+	union htt_rx_pn_t new_pn = {0};
+	struct htt_hl_rx_desc *rx_desc;
 	struct ieee80211_hdr *hdr;
 	struct ieee80211_rx_status *rx_status;
 	u16 peer_id;
@@ -2158,9 +2162,11 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct ath10k_htt *htt,
 	int num_mpdu_ranges;
 	size_t tot_hdr_len;
 	struct ieee80211_channel *ch;
-	bool pn_invalid;
+	bool pn_invalid, qos, first_msdu;
+	u32 tid, rx_desc_info;
 
 	peer_id = __le16_to_cpu(rx->hdr.peer_id);
+	tid = MS(rx->hdr.info0, HTT_RX_INDICATION_INFO0_EXT_TID);
 
 	spin_lock_bh(&ar->data_lock);
 	peer = ath10k_peer_find_by_id(ar, peer_id);
@@ -2168,6 +2174,9 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct ath10k_htt *htt,
 	if (!peer && peer_id != HTT_INVALID_PEERID)
 		ath10k_warn(ar, "Got RX ind from invalid peer: %u\n", peer_id);
 
+	if (!peer)
+		return true;
+
 	num_mpdu_ranges = MS(__le32_to_cpu(rx->hdr.info1),
 			     HTT_RX_INDICATION_INFO1_NUM_MPDU_RANGES);
 	mpdu_ranges = htt_rx_ind_get_mpdu_ranges_hl(rx);
@@ -2192,10 +2201,24 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct ath10k_htt *htt,
 		goto err;
 	}
 
-	if (check_pn_type == HTT_RX_PN_CHECK) {
+	rx_desc = (struct htt_hl_rx_desc *)&rx->mpdu_ranges[num_mpdu_ranges];
+	rx_desc_info = __le32_to_cpu(rx_desc->info);
+
+	if (MS(rx_desc_info, HTT_RX_DESC_HL_INFO_MCAST_BCAST))
+		sec_index = HTT_TXRX_SEC_MCAST;
+	else
+		sec_index = HTT_TXRX_SEC_UCAST;
+
+	sec_type = peer->rx_pn[sec_index].sec_type;
+	first_msdu = rx->fw_desc.flags & FW_RX_DESC_FLAGS_FIRST_MSDU;
+
+	ath10k_htt_rx_mpdu_desc_pn_hl(rx_desc, &new_pn, peer->rx_pn[sec_index].pn_len);
+
+	if (check_pn_type == HTT_RX_PN_CHECK && tid >= IEEE80211_NUM_TIDS) {
 		spin_lock_bh(&ar->data_lock);
 		pn_invalid = ath10k_htt_rx_pn_check_replay_hl(ar, peer, rx);
 		spin_unlock_bh(&ar->data_lock);
+
 		if (pn_invalid)
 			goto err;
 	}
@@ -2211,6 +2234,7 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct ath10k_htt *htt,
 	skb_pull(skb, tot_hdr_len);
 
 	hdr = (struct ieee80211_hdr *)skb->data;
+	qos = ieee80211_is_data_qos(hdr->frame_control);
 	rx_status = IEEE80211_SKB_RXCB(skb);
 	rx_status->chains |= BIT(0);
 	if (rx->ppdu.combined_rssi == 0) {
@@ -2254,6 +2278,55 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct ath10k_htt *htt,
 		rx_status->flag |= RX_FLAG_DECRYPTED |
 				   RX_FLAG_IV_STRIPPED |
 				   RX_FLAG_MMIC_STRIPPED;
+
+		if (tid < IEEE80211_NUM_TIDS &&
+		    first_msdu &&
+		    check_pn_type == HTT_RX_PN_CHECK &&
+		   (sec_type == HTT_SECURITY_AES_CCMP ||
+		    sec_type == HTT_SECURITY_TKIP ||
+		    sec_type == HTT_SECURITY_TKIP_NOMIC)) {
+			u8 offset, *ivp, i;
+			s8 keyidx = 0;
+			__le64 pn48 = cpu_to_le64(new_pn.pn48);
+
+			hdr = (struct ieee80211_hdr *)skb->data;
+			offset = ieee80211_hdrlen(hdr->frame_control);
+			hdr->frame_control |= __cpu_to_le16(IEEE80211_FCTL_PROTECTED);
+			rx_status->flag &= ~RX_FLAG_IV_STRIPPED;
+
+			memmove(skb->data - IEEE80211_CCMP_HDR_LEN,
+				skb->data, offset);
+			skb_push(skb, IEEE80211_CCMP_HDR_LEN);
+			ivp = skb->data + offset;
+			memset(skb->data + offset, 0, IEEE80211_CCMP_HDR_LEN);
+			/* Ext IV */
+			ivp[IEEE80211_WEP_IV_LEN - 1] |= ATH10K_IEEE80211_EXTIV;
+
+			for (i = 0; i < ARRAY_SIZE(peer->keys); i++) {
+				if (peer->keys[i] &&
+				    peer->keys[i]->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+					keyidx = peer->keys[i]->keyidx;
+			}
+
+			/* Key ID */
+			ivp[IEEE80211_WEP_IV_LEN - 1] |= keyidx << 6;
+
+			if (sec_type == HTT_SECURITY_AES_CCMP) {
+				rx_status->flag |= RX_FLAG_MIC_STRIPPED;
+				/* pn 0, pn 1 */
+				memcpy(skb->data + offset, &pn48, 2);
+				/* pn 1, pn 3 , pn 34 , pn 5 */
+				memcpy(skb->data + offset + 4, ((u8 *)&pn48) + 2, 4);
+			} else {
+				rx_status->flag |= RX_FLAG_ICV_STRIPPED;
+				/* TSC 0 */
+				memcpy(skb->data + offset + 2, &pn48, 1);
+				/* TSC 1 */
+				memcpy(skb->data + offset, ((u8 *)&pn48) + 1, 1);
+				/* TSC 2 , TSC 3 , TSC 4 , TSC 5*/
+				memcpy(skb->data + offset + 4, ((u8 *)&pn48) + 2, 4);
+			}
+		}
 	}
 
 	if (tkip_mic_type == HTT_RX_TKIP_MIC)
@@ -2263,6 +2336,20 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct ath10k_htt *htt,
 	if (mpdu_ranges->mpdu_range_status == HTT_RX_IND_MPDU_STATUS_TKIP_MIC_ERR)
 		rx_status->flag |= RX_FLAG_MMIC_ERROR;
 
+	if (!qos && tid < IEEE80211_NUM_TIDS) {
+		u8 offset;
+		__le16 qos_ctrl = 0;
+
+		hdr = (struct ieee80211_hdr *)skb->data;
+		offset = ieee80211_hdrlen(hdr->frame_control);
+
+		hdr->frame_control |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
+		memmove(skb->data - IEEE80211_QOS_CTL_LEN, skb->data, offset);
+		skb_push(skb, IEEE80211_QOS_CTL_LEN);
+		qos_ctrl = cpu_to_le16(tid);
+		memcpy(skb->data + offset, &qos_ctrl, IEEE80211_QOS_CTL_LEN);
+	}
+
 	ieee80211_rx_ni(ar->hw, skb);
 
 	/* We have delivered the skb to the upper layers (mac80211) so we
Signature · 7 lines
1.9.1


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#1 lore raw
Quoted 30 lines · Wen Gong

For sdio chip, if the rssi is not good, then it have some retry, firmware will indicate the msdu list of a ppdu with a hole, it means it lost the hole msdu, after the msdu retry from AP, the hole msdu will indicate from firmware later. The hole msdu's PN check will fail and the hole msdu will be dropped.

PN check fail example:
Sequence number PN number PN check status

     3814         6101         success
     3815         6102         success
     3816         6103         success
     3818         6105         success
     3819         6106         success
     3820         6107         success
     3817         6104         fail

The correct logic is reorder the msdu list and then do PN check. ieee80211_rx_reorder_ampdu of mac80211 will do the reorer logic and then do PN check in ieee80211_rx_h_decrypt of mac80211.

example after reorder:
Sequence number PN number PN check status

     3814         6101         success
     3815         6102         success
     3816         6103         success
     3817         6104         success
     3818         6105         success
     3819         6106         success
     3820         6107         success
Quoted 5 lines

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00017-QCARMSWP-1.

Patch applied to ath-next branch of ath.git, thanks.

db8deae03271 ath10k: add reorder and change PN check logic for mac80211

Signature · 9 lines
https://patchwork.kernel.org/patch/11105545/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#2 lore raw
In reply to Wen Gong
Quoted 30 lines · Wen Gong

For sdio chip, if the rssi is not good, then it have some retry, firmware will indicate the msdu list of a ppdu with a hole, it means it lost the hole msdu, after the msdu retry from AP, the hole msdu will indicate from firmware later. The hole msdu's PN check will fail and the hole msdu will be dropped.

PN check fail example:
Sequence number PN number PN check status

     3814         6101         success
     3815         6102         success
     3816         6103         success
     3818         6105         success
     3819         6106         success
     3820         6107         success
     3817         6104         fail

The correct logic is reorder the msdu list and then do PN check. ieee80211_rx_reorder_ampdu of mac80211 will do the reorer logic and then do PN check in ieee80211_rx_h_decrypt of mac80211.

example after reorder:
Sequence number PN number PN check status

     3814         6101         success
     3815         6102         success
     3816         6103         success
     3817         6104         success
     3818         6105         success
     3819         6106         success
     3820         6107         success
Quoted 5 lines

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00017-QCARMSWP-1.

Patch applied to ath-next branch of ath.git, thanks.

db8deae03271 ath10k: add reorder and change PN check logic for mac80211

Signature · 3 lines
https://patchwork.kernel.org/patch/11105545/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches