regulator: da9211: fix obtaining "enable" GPIO
PATCH 1/1 regulator: da9211: fix obtaining "enable" GPIO
This fixes 11da04af0d3b, as devm_gpiod_get_from_of_node() does not do translation "con-id" -> "con-id-gpios" that our bindings expects, and therefore it was wrong to change connection ID to be simply "enable" when moving to using devm_gpiod_get_from_of_node().
--- drivers/regulator/da9211-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/regulator/da9211-regulator.c +1 -1
@@ -285,7 +285,7 @@ static struct da9211_pdata *da9211_parse_regulators_dt( pdata->reg_node[n] = da9211_matches[i].of_node; pdata->gpiod_ren[n] =devm_gpiod_get_from_of_node (dev, da9211_matches[i].of_node, -"enable" , +"enable-gpios" ,0 ,GPIOD_OUT_HIGH |GPIOD_FLAGS_BIT_NONEXCLUSIVE ,"da9211-enable" );
Signature · 5 lines
2.23.0.162.g0b9fbb3734-goog -- Dmitry
Mark Brown
maintainerApplied "regulator: da9211: fix obtaining "enable" GPIO" to the regulator tree
The patch
regulator: da9211: fix obtaining "enable" GPIO
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.4
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From 5eda8e95b7922cb9dd1343f7beece3cd78565216 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <[email protected]>
Date: Tue, 10 Sep 2019 10:02:46 -0700
Subject: [PATCH] regulator: da9211: fix obtaining "enable" GPIO
This fixes 11da04af0d3b, as devm_gpiod_get_from_of_node() does not do translation "con-id" -> "con-id-gpios" that our bindings expects, and therefore it was wrong to change connection ID to be simply "enable" when moving to using devm_gpiod_get_from_of_node().
--- drivers/regulator/da9211-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/regulator/da9211-regulator.c +1 -1
@@ -285,7 +285,7 @@ static struct da9211_pdata *da9211_parse_regulators_dt( pdata->reg_node[n] = da9211_matches[i].of_node; pdata->gpiod_ren[n] =devm_gpiod_get_from_of_node (dev, da9211_matches[i].of_node, -"enable" , +"enable-gpios" ,0 ,GPIOD_OUT_HIGH |GPIOD_FLAGS_BIT_NONEXCLUSIVE ,"da9211-enable" );
Signature · 1 line
2.20.1
Quoted 7 lines · Dmitry Torokhov
This fixes
11da04af0d3b, asdevm_gpiod_get_from_of_node()does not do translation "con-id" -> "con-id-gpios" that our bindings expects, and therefore it was wrong to change connection ID to be simply "enable" when moving to usingdevm_gpiod_get_from_of_node().Fixes 11da04af0d3b ("regulator: da9211: Pass descriptors instead of GPIO numbers")Signed-off-by Dmitry Torokhov <[email protected]>
Mark: please tag both of these for stable.
Yours,
Linus Walleij
Mark Brown
maintainerQuoted 1 line · Linus Walleij
Mark: please tag both of these for stable.
Too late, I already applied them. If you ping Greg I'm sure he'll pick them up (and there's a good chance Sasha will find them anyway).