Skip to contentSkip to conversation

Add USB support

PATCH New Biju Das 2 participants 7 messages Sep 9, 2019 – Sep 11, 2019

Subsystems (4)
lore
Share & tools
lore

Biju Das

author
#0 lore raw

cover Add USB support

This patch series add USB2.0/USB3.0 support for Hihope RZ/G2M platform.

This patch series is based on linux-4.19.y-cip and all the patches in this series are cherry-picked from linux rc tree.

Biju Das (3):
arm64: dts: renesas: r8a774a1: Fix USB 2.0 clocks
arm64: dts: renesas: hihope-common: Add USB 2.0 support
arm64: dts: renesas: hihope-common: Enable USB3.0

Yoshihiro Shimoda (1):
phy: renesas: rcar-gen3-usb2: fix imbalance powered flag

 arch/arm64/boot/dts/renesas/hihope-common.dtsi | 106 +++++++++++++++++++++++++
 arch/arm64/boot/dts/renesas/r8a774a1.dtsi      |  16 ++--
 drivers/phy/renesas/phy-rcar-gen3-usb2.c       |  19 ++++-
 3 files changed, 129 insertions(+), 12 deletions(-)
Signature · 1 line
2.7.4
author
#1 lore raw

PATCH 1/4 phy: renesas: rcar-gen3-usb2: fix imbalance powered flag

From: Yoshihiro Shimoda <[email protected]>

commit 5c9dc6379f539c68a0fdd39e39a9d359545649e9 upstream.

The powered flag should be set for any other phys anyway. Also the flag should be locked by the channel. Otherwise, after we have revised the device tree for the usb phy, the following warning happened during a second system suspend. And if the driver doesn't lock the flag, an imbalance is possible when enabling the regulator during system resume. So, this patch fixes the issues.

< The warning >

[   56.026531] unbalanced disables for USB20_VBUS0
[   56.031108] WARNING: CPU: 3 PID: 513 at drivers/regulator/core.c:2593 _regula
tor_disable+0xe0/0x1c0
[   56.040146] Modules linked in: rcar_du_drm rcar_lvds drm_kms_helper drm drm_p

anel_orientation_quirks vsp1 videobuf2_vmalloc videobuf2_dma_contig videobuf2_me mops videobuf2_v4l2 videobuf2_common videodev snd_soc_rcar renesas_usbhs snd_soc _audio_graph_card media snd_soc_simple_card_utils crct10dif_ce renesas_usb3 snd_ soc_ak4613 rcar_fcp pwm_rcar usb_dmac phy_rcar_gen3_usb3 pwm_bl ipv6

[   56.074047] CPU: 3 PID: 513 Comm: kworker/u16:19 Not tainted 5.2.0-rc3-00001-
g5f20a19 #6
[   56.082129] Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (
DT)
[   56.089524] Workqueue: events_unbound async_run_entry_fn
[   56.094832] pstate: 40000005 (nZcv daif -PAN -UAO)
[   56.099617] pc : _regulator_disable+0xe0/0x1c0
[   56.104054] lr : _regulator_disable+0xe0/0x1c0
[   56.108489] sp : ffff0000121c3ae0
[   56.111796] x29: ffff0000121c3ae0 x28: 0000000000000000
[   56.117102] x27: 0000000000000000 x26: ffff000010fe0e60
[   56.122407] x25: 0000000000000002 x24: 0000000000000001
[   56.127712] x23: 0000000000000002 x22: ffff8006f99d4000
[   56.133017] x21: ffff8006f99cc000 x20: ffff8006f9846800
[   56.138322] x19: ffff8006f9846800 x18: ffffffffffffffff
[   56.143626] x17: 0000000000000000 x16: 0000000000000000
[   56.148931] x15: ffff0000112f96c8 x14: ffff0000921c37f7
[   56.154235] x13: ffff0000121c3805 x12: ffff000011312000
[   56.159540] x11: 0000000005f5e0ff x10: ffff0000112f9f20
[   56.164844] x9 : ffff0000112d3018 x8 : 00000000000001ad
[   56.170149] x7 : 00000000ffffffcc x6 : ffff8006ff768180
[   56.175453] x5 : ffff8006ff768180 x4 : 0000000000000000
[   56.180758] x3 : ffff8006ff76ef10 x2 : ffff8006ff768180
[   56.186062] x1 : 3d2eccbaead8fb00 x0 : 0000000000000000
[   56.191367] Call trace:
[   56.193808]  _regulator_disable+0xe0/0x1c0
[   56.197899]  regulator_disable+0x40/0x78
[   56.201820]  rcar_gen3_phy_usb2_power_off+0x3c/0x50
[   56.206692]  phy_power_off+0x48/0xd8
[   56.210263]  usb_phy_roothub_power_off+0x30/0x50
[   56.214873]  usb_phy_roothub_suspend+0x1c/0x50
[   56.219311]  hcd_bus_suspend+0x13c/0x168
[   56.223226]  generic_suspend+0x4c/0x58
[   56.226969]  usb_suspend_both+0x1ac/0x238
[   56.230972]  usb_suspend+0xcc/0x170
[   56.234455]  usb_dev_suspend+0x10/0x18
[   56.238199]  dpm_run_callback.isra.6+0x20/0x68
[   56.242635]  __device_suspend+0x110/0x308
[   56.246637]  async_suspend+0x24/0xa8
[   56.250205]  async_run_entry_fn+0x40/0xf8
[   56.254210]  process_one_work+0x1e0/0x320
[   56.258211]  worker_thread+0x40/0x450
[   56.261867]  kthread+0x124/0x128
[   56.265094]  ret_from_fork+0x10/0x18
[   56.268661] ---[ end trace 86d7ec5de5c517af ]---
[   56.273290] phy phy-ee080200.usb-phy.10: phy poweroff failed --> -5
---
 drivers/phy/renesas/phy-rcar-gen3-usb2.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)
drivers/phy/renesas/phy-rcar-gen3-usb2.c +15 -4
index 132ca20..fdc81b5 100644
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
@@ -109,6 +110,7 @@ struct rcar_gen3_chan {
 	struct rcar_gen3_phy rphys[NUM_OF_PHYS];
 	struct regulator *vbus;
 	struct work_struct work;
+	struct mutex lock;	/* protects rphys[...].powered */
 	enum usb_dr_mode dr_mode;
 	bool extcon_host;
 	bool is_otg_channel;
@@ -440,15 +442,16 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p)
 	struct rcar_gen3_chan *channel = rphy->ch;
 	void __iomem *usb2_base = channel->base;
 	u32 val;
-	int ret;
+	int ret = 0;
 
+	mutex_lock(&channel->lock);
 	if (!rcar_gen3_are_all_rphys_power_off(channel))
-		return 0;
+		goto out;
 
 	if (channel->vbus) {
 		ret = regulator_enable(channel->vbus);
 		if (ret)
-			return ret;
+			goto out;
 	}
 
 	val = readl(usb2_base + USB2_USBCTR);
@@ -457,7 +460,10 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p)
 	val &= ~USB2_USBCTR_PLL_RST;
 	writel(val, usb2_base + USB2_USBCTR);
 
+out:
+	/* The powered flag should be set for any other phys anyway */
 	rphy->powered = true;
+	mutex_unlock(&channel->lock);
 
 	return 0;
 }
@@ -468,14 +474,18 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p)
 	struct rcar_gen3_chan *channel = rphy->ch;
 	int ret = 0;
 
+	mutex_lock(&channel->lock);
 	rphy->powered = false;
 
 	if (!rcar_gen3_are_all_rphys_power_off(channel))
-		return 0;
+		goto out;
 
 	if (channel->vbus)
 		ret = regulator_disable(channel->vbus);
 
+out:
+	mutex_unlock(&channel->lock);
+
 	return ret;
 }
 
@@ -642,6 +652,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 	if (!phy_usb2_ops)
 		return -EINVAL;
 
+	mutex_init(&channel->lock);
 	for (i = 0; i < NUM_OF_PHYS; i++) {
 		channel->rphys[i].phy = devm_phy_create(dev, NULL,
 							phy_usb2_ops);
Signature · 1 line
2.7.4
author
#2 lore raw

PATCH 2/4 arm64: dts: renesas: r8a774a1: Fix USB 2.0 clocks

In reply to Biju Das

commit a573cb676d54ce314f58e129f8d69ff09c9a92cf upstream.

Similarly to what done for the r8a7796 with commit 737e05bf034e ("arm64: dts: renesas: revise properties for R-Car Gen3 SoCs' usb 2.0"), this patch lists the clock for the USB High-Speed Module (HS-USB) with the USB2.0 Host (EHCI/OHCI) IP DT node, and it lists the clock for the USB2.0 Host IP with the HS-USB module DT node.

Fixes 4c2c2fb99876 ("arm64: dts: renesas: r8a774a1: Add USB2.0 phy and host(EHCI/OHCI) device nodes")
Fixes ed898d4fc19d ("arm64: dts: renesas: r8a774a1: Add USB-DMAC and HSUSB device nodes")
---
 arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
arch/arm64/boot/dts/renesas/r8a774a1.dtsi +8 -8
index bdf4292..892db7d 100644
@@ -821,7 +821,7 @@
 				     "renesas,rcar-gen3-usbhs";
 			reg = <0 0xe6590000 0 0x200>;
 			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 704>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
 			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
 			       <&usb_dmac1 0>, <&usb_dmac1 1>;
 			dma-names = "ch0", "ch1", "ch2", "ch3";
@@ -829,7 +829,7 @@
 			phys = <&usb2_phy0>;
 			phy-names = "usb";
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
-			resets = <&cpg 704>;
+			resets = <&cpg 704>, <&cpg 703>;
 			status = "disabled";
 		};
 
@@ -1655,11 +1655,11 @@
 			compatible = "generic-ohci";
 			reg = <0 0xee080000 0 0x100>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 703>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
 			phys = <&usb2_phy0>;
 			phy-names = "usb";
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
+			resets = <&cpg 703>, <&cpg 704>;
 			status = "disabled";
 		};
 
@@ -1679,12 +1679,12 @@
 			compatible = "generic-ehci";
 			reg = <0 0xee080100 0 0x100>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 703>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
 			phys = <&usb2_phy0>;
 			phy-names = "usb";
 			companion = <&ohci0>;
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
+			resets = <&cpg 703>, <&cpg 704>;
 			status = "disabled";
 		};
 
@@ -1706,9 +1706,9 @@
 				     "renesas,rcar-gen3-usb2-phy";
 			reg = <0 0xee080200 0 0x700>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 703>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
+			resets = <&cpg 703>, <&cpg 704>;
 			#phy-cells = <0>;
 			status = "disabled";
 		};
Signature · 1 line
2.7.4
author
#3 lore raw

PATCH 3/4 arm64: dts: renesas: hihope-common: Add USB 2.0 support

In reply to Biju Das

commit 734d277f412ae9e6ea9f2ee7a6b5f1b3deadf2fc upstream.

Add USB 2.0 support to the HiHope RZ/G2M.

[Fixes: SDHI3 got accidentally disabled on the original commit]
---
 arch/arm64/boot/dts/renesas/hihope-common.dtsi | 77 ++++++++++++++++++++++++++
 1 file changed, 77 insertions(+)
arch/arm64/boot/dts/renesas/hihope-common.dtsi +77 -0
index 77d183a..8373cf8 100644
@@ -55,6 +55,17 @@
 		regulator-always-on;
 	};
 
+	vbus0_usb2: regulator-vbus0-usb2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB20_VBUS0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	vccq_sdhi0: regulator-vccq-sdhi0 {
 		compatible = "regulator-gpio";
 
@@ -69,6 +80,14 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
 &extal_clk {
 	clock-frequency = <16666666>;
 };
@@ -77,6 +96,28 @@
 	clock-frequency = <32768>;
 };
 
+&gpio6 {
+	usb1-reset {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "usb1-reset";
+	};
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
 &pfc {
 	pinctrl-0 = <&scif_clk_pins>;
 	pinctrl-names = "default";
@@ -108,6 +149,23 @@
 		function = "sdhi3";
 		power-source = <1800>;
 	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		mux {
+			groups = "usb1";
+			function = "usb1";
+		};
+
+		ovc {
+			pins = "GP_6_27";
+			bias-pull-up;
+		};
+	};
 };
 
 &rwdt {
@@ -153,3 +211,22 @@
 	fixed-emmc-driver-type = <1>;
 	status = "okay";
 };
+
+&usb_extal_clk {
+	clock-frequency = <50000000>;
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	vbus-supply = <&vbus0_usb2>;
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
Signature · 1 line
2.7.4
author
#4 lore raw

PATCH 4/4 arm64: dts: renesas: hihope-common: Enable USB3.0

In reply to Biju Das

commit 3ba27637d8019d5bfea4ca25302b0d08bb6a1736 upstream.

This patch enables USB3.0 host/peripheral device node for the HiHope RZ/G2M board.

---
 arch/arm64/boot/dts/renesas/hihope-common.dtsi | 29 ++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
arch/arm64/boot/dts/renesas/hihope-common.dtsi +29 -0
index 8373cf8..de1c75f 100644
@@ -166,6 +166,11 @@
 			bias-pull-up;
 		};
 	};
+
+	usb30_pins: usb30 {
+		groups = "usb30";
+		function = "usb30";
+	};
 };
 
 &rwdt {
@@ -230,3 +235,27 @@
 
 	status = "okay";
 };
+
+&usb3_peri0 {
+	phys = <&usb3_phy0>;
+	phy-names = "usb";
+
+	companion = <&xhci0>;
+
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3s0_clk {
+	clock-frequency = <100000000>;
+};
+
+&xhci0 {
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
Signature · 1 line
2.7.4
#5 lore raw

cover Add USB support

In reply to Biju Das

Hi!

Quoted 5 lines

This patch series add USB2.0/USB3.0 support for Hihope RZ/G2M platform.

This patch series is based on linux-4.19.y-cip and all the patches in this series are cherry-picked from linux rc tree.

Quoted 7 lines

Biju Das (3):
arm64: dts: renesas: r8a774a1: Fix USB 2.0 clocks
arm64: dts: renesas: hihope-common: Add USB 2.0 support
arm64: dts: renesas: hihope-common: Enable USB3.0

Yoshihiro Shimoda (1):
phy: renesas: rcar-gen3-usb2: fix imbalance powered flag

Nothing obviously wrong here. Let me apply the series...

Best regards,
Pavel

Signature · 9 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.cip-project.org/pipermail/cip-dev/attachments/20190911/be18f014/attachment.sig>
Applied
#6 lore raw

cover Add USB support

Quoted 12 lines · Pavel Machek

Hi!

Quoted 10 lines

This patch series add USB2.0/USB3.0 support for Hihope RZ/G2M platform.

This patch series is based on linux-4.19.y-cip and all the patches in this series are cherry-picked from linux rc tree.

Biju Das (3):
arm64: dts: renesas: r8a774a1: Fix USB 2.0 clocks
arm64: dts: renesas: hihope-common: Add USB 2.0 support
arm64: dts: renesas: hihope-common: Enable USB3.0

Quoted 4 lines
Quoted 2 lines

Yoshihiro Shimoda (1):
phy: renesas: rcar-gen3-usb2: fix imbalance powered flag

Nothing obviously wrong here. Let me apply the series...

Hmm, so according to gitlab Iwamatsu already tried to apply the series, and got failure in self-test. Let me submit aa6c3bd087e5f39 for testing to see if it is problem with testing or problem with code.

https://gitlab.com/cip-project/cip-kernel/linux-cip/pipelines/81577156

...so it seems problem is with tests.

I applied the series and pushed it to kernel.org. Thanks!

Best regards,
Pavel

Signature · 9 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.cip-project.org/pipermail/cip-dev/attachments/20190911/81f6199b/attachment.sig>