net: phylink: clarify where phylink should be used
Subsystems (3)
PATCH 1/1 net: phylink: clarify where phylink should be used
Update the phylink documentation to make it clear that phylink is designed to be used on the MAC facing side of the link, rather than between a SFP and PHY.
Signed-off-by Russell King <[email protected]>
--- Documentation/networking/sfp-phylink.rst | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
Documentation/networking/sfp-phylink.rst +2 -1
@@ -8,7 +8,8 @@ Overview ======== phylink is a mechanism to support hot-pluggable networking modules -without needing to re-initialise the adapter on hot-plug events. +directly connected to a MAC without needing to re-initialise the +adapter on hot-plug events. phylink supports conventional phylib-based setups, fixed link setups and SFP (Small Formfactor Pluggable) modules at present.
Signature · 1 line
2.7.4
Quoted 5 lines · Russell King
Update the phylink documentation to make it clear that phylink is designed to be used on the MAC facing side of the link, rather than between a SFP and PHY.
Signed-off-by Russell King <[email protected]>
Reviewed-by Andrew Lunn <[email protected]>
Andrew
From: Russell King <[email protected]>
Date: Sat, 14 Sep 2019 10:44:04 +0100
Quoted 5 lines
Update the phylink documentation to make it clear that phylink is designed to be used on the MAC facing side of the link, rather than between a SFP and PHY.
Signed-off-by Russell King <[email protected]>
Applied.