Skip to contentSkip to conversation

rockchip: dts: rk3288-tinker: Fix peripheral that need to be configured at boot

PATCH New Michael Trimarchi 1 participant 1 message Sep 15, 2019 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 rockchip: dts: rk3288-tinker: Fix peripheral that need to be configured at boot

Tinker board needs to mux all the sdmmc gpio and activate the regulator connected to bank 7. Remove all the bank that are not in use an mark dm,spl the part that need to run there

---
 arch/arm/dts/rk3288-tinker-u-boot.dtsi | 26 +++++++++++++++++++-------
 configs/tinker-rk3288_defconfig        |  7 ++++++-
 2 files changed, 25 insertions(+), 8 deletions(-)
arch/arm/dts/rk3288-tinker-u-boot.dtsi +19 -7
index 2efb309d6b..f7f9d6dc72 100644
@@ -13,20 +13,20 @@
 	u-boot,dm-pre-reloc;
 };
 
-&sdmmc {
+&uart2_xfer {
 	u-boot,dm-pre-reloc;
 };
 
-&emmc {
-	u-boot,dm-pre-reloc;
+&sdmmc {
+	u-boot,dm-spl;
 };
 
-&gpio3 {
-	u-boot,dm-pre-reloc;
+&gpio7 {
+	u-boot,dm-spl;
 };
 
-&gpio8 {
-	u-boot,dm-pre-reloc;
+&vcc_sd {
+	u-boot,dm-spl;
 };
 
 &pcfg_pull_none_drv_8ma {
@@ -37,10 +37,22 @@
 	u-boot,dm-spl;
 };
 
+&pcfg_pull_none {
+	u-boot,dm-spl;
+};
+
+&pcfg_pull_up {
+	u-boot,dm-spl;
+};
+
 &sdmmc_bus4 {
 	u-boot,dm-spl;
 };
 
+&sdmmc_cd {
+	u-boot,dm-spl;
+};
+
 &sdmmc_clk {
 	u-boot,dm-spl;
 };
configs/tinker-rk3288_defconfig +6 -1
index 443f4d88b9..73496901d5 100644
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_ROCKCHIP_RK3288=y
 CONFIG_TARGET_TINKER_RK3288=y
 CONFIG_NR_DRAM_BANKS=1
@@ -8,6 +9,7 @@ CONFIG_SPL_SIZE_LIMIT=307200
 CONFIG_DEBUG_UART_BASE=0xff690000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_DEBUG_UART=y
+CONFIG_SPL_TEXT_BASE=0
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_USE_PREBOOT=y
 CONFIG_SILENT_CONSOLE=y
@@ -15,7 +17,8 @@ CONFIG_CONSOLE_MUX=y
 CONFIG_DEFAULT_FDT_FILE="rk3288-tinker.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_TEXT_BASE=0
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_POWER_SUPPORT=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
@@ -61,7 +64,9 @@ CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_DM_PMIC=y
 CONFIG_PMIC_RK8XX=y
+CONFIG_SPL_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_SPL_DM_REGULATOR_FIXED=y
 CONFIG_REGULATOR_RK8XX=y
 CONFIG_PWM_ROCKCHIP=y
 CONFIG_RAM=y
Signature · 1 line
2.17.1