Update clone3 self-tests
v2 cover Update clone3 self-tests
Hello.
This patch set updates clone3 selftest in several aspects:
- adding checks for exit_signal invalid values handling;
- adding clone3 to selftests targets;
- enabling clone3 tests on all architectures;
- minor cleanups of the clone3 test.
Applied on top of brauer/linux.git/for-next.
Changes since v1[1]:
- exit_signal check extended to cover more cases of invalid exit_signal value.
[1] https://lkml.org/lkml/2019/9/10/416
Eugene Syromiatnikov (6):
selftests/clone3: convert test modes into an enum selftests/clone3: add a check for invalid exit_signal selftests/clone3: use uint64_t for flags parameter selftests/clone3: fix up format strings selftests/clone3: enable clone3 self-tests on all architectures
selftests: add clone3 to TARGETS
tools/testing/selftests/Makefile | 1 + tools/testing/selftests/clone3/Makefile | 4 +-- tools/testing/selftests/clone3/clone3.c | 64 ++++++++++++++++++++++++++++----- 3 files changed, 57 insertions(+), 12 deletions(-)
Signature · 1 line
2.1.4
PATCH v2 1/6 selftests/clone3: convert test modes into an enum
* tools/testing/selftests/clone3/clone3.c (CLONE3_ARGS_NO_TEST, CLONE3_ARGS_ALL_0, CLONE3_ARGS_ALL_1): Change into an enum. (call_clone3): Change test_mode parameter type to enum test_mode; use switch statement for actions that dependent on test_mode selection. (test_clone3): Change test_mode parameter type to enum test_mode.
--- tools/testing/selftests/clone3/clone3.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)
tools/testing/selftests/clone3/clone3.c +14 -7
@@ -24,16 +24,18 @@/* V1 includes set_tid */ #define CLONE3_ARGS_SIZE_V1 72 -#define CLONE3_ARGS_NO_TEST 0 -#define CLONE3_ARGS_ALL_0 1 -#define CLONE3_ARGS_ALL_1 2 +enum test_mode { +CLONE3_ARGS_NO_TEST , +CLONE3_ARGS_ALL_0 , +CLONE3_ARGS_ALL_1 , +};static pid_t raw_clone (struct clone_args *args,size_t size) {return syscall (__NR_clone3, args, size); } -static int call_clone3 (int flags,size_t size,int test_mode) +static int call_clone3 (int flags,size_t size,enum test_mode test_mode) {struct clone_args args = {0 };pid_t ppid =-1 ;
@@ -46,7 +48,8 @@ static int call_clone3(int flags, size_t size, int test_mode)if (size ==0 ) size =sizeof (struct clone_args ); -if (test_mode ==CLONE3_ARGS_ALL_0 ) { +switch (test_mode) { +case CLONE3_ARGS_ALL_0 : args.flags =0 ; args.pidfd =0 ; args.child_tid =0 ;
@@ -56,7 +59,9 @@ static int call_clone3(int flags, size_t size, int test_mode) args. stack_size =0 ; args.tls =0 ; args.set_tid =0 ; - }else if (test_mode ==CLONE3_ARGS_ALL_1 ) { +break ; + +case CLONE3_ARGS_ALL_1 : args.flags =1 ; args.pidfd =1 ; args.child_tid =1 ;
@@ -66,6 +71,7 @@ static int call_clone3(int flags, size_t size, int test_mode) args. stack_size =1 ; args.tls =1 ; args.set_tid =1 ; +break ; } pid =raw_clone (&args, size);
@@ -91,7 +97,8 @@ static int call_clone3(int flags, size_t size, int test_mode)return 0 ; } -static int test_clone3 (int flags,size_t size,int expected,int test_mode) +static int test_clone3 (int flags,size_t size,int expected, +enum test_mode test_mode) {int ret;
Signature · 1 line
2.1.4
PATCH v2 2/6 selftests/clone3: add a check for invalid exit_signal
In reply to Eugene SyromiatnikovCheck that the kernel fails calls with exit_signal with non-zero highest 32 bits, negative 32-bit exit_signal, and not failing on passing invalid exit_signal withing CSIGNAL mask, like legacy clone syscalls do.
* tools/testing/selftests/clone3/clone3.c (enum test_mode): Add CLONE3_ARGS_INVAL_EXIT_SIGNAL_BIG, CLONE3_ARGS_INVAL_EXIT_SIGNAL_NEG, CLONE3_ARGS_INVAL_EXIT_SIGNAL_CSIG, CLONE3_ARGS_INVAL_EXIT_SIGNAL_NSIG. (call_clone3): Add args.exit_signal initialisation in case test_mode is equal to one of the added enum test_mode values.
(main): Add test_clone3 clone check with test_mode equal to the added enum test_mode values.
--- tools/testing/selftests/clone3/clone3.c | 36 +++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+)
tools/testing/selftests/clone3/clone3.c +36 -0
@@ -28,6 +28,10 @@ enum test_mode {CLONE3_ARGS_NO_TEST ,CLONE3_ARGS_ALL_0 ,CLONE3_ARGS_ALL_1 , +CLONE3_ARGS_INVAL_EXIT_SIGNAL_BIG , +CLONE3_ARGS_INVAL_EXIT_SIGNAL_NEG , +CLONE3_ARGS_INVAL_EXIT_SIGNAL_CSIG , + CLONE3_ARGS_INVAL_EXIT_SIGNAL_NSIG, };static pid_t raw_clone (struct clone_args *args,size_t size)
@@ -72,6 +76,22 @@ static int call_clone3(int flags, size_t size, enum test_mode test_mode) args.tls =1 ; args.set_tid =1 ;break ; + +case CLONE3_ARGS_INVAL_EXIT_SIGNAL_BIG : + args.exit_signal =0xbadc0ded00000000ULL ; +break ; + +case CLONE3_ARGS_INVAL_EXIT_SIGNAL_NEG : + args.exit_signal =0x0000000080000000ULL ; +break ; + +case CLONE3_ARGS_INVAL_EXIT_SIGNAL_CSIG : + args.exit_signal =0x0000000000000100ULL ; +break ; + +case CLONE3_ARGS_INVAL_EXIT_SIGNAL_NSIG : + args.exit_signal =0x00000000000000f0ULL ; +break ; } pid =raw_clone (&args, size);
@@ -146,6 +166,22 @@ int main(int argc, char *argv[])/* Do a clone3() with all members set to 1 */ if (test_clone3 (0 ,CLONE3_ARGS_SIZE_V0 , -EINVAL ,CLONE3_ARGS_ALL_1 )) goto on_error; +/* Do a clone3() with exit_signal having highest 32 bits non-zero */ +if (test_clone3 (0 ,CLONE3_ARGS_SIZE_V0 , -EINVAL , +CLONE3_ARGS_INVAL_EXIT_SIGNAL_BIG )) + goto on_error; +/* Do a clone3() with negative 32-bit exit_signal */ +if (test_clone3 (0 ,CLONE3_ARGS_SIZE_V0 , -EINVAL , +CLONE3_ARGS_INVAL_EXIT_SIGNAL_NEG )) + goto on_error; +/* Do a clone3() with exit_signal not fitting into CSIGNAL mask */ +if (test_clone3 (0 ,CLONE3_ARGS_SIZE_V0 , -EINVAL , +CLONE3_ARGS_INVAL_EXIT_SIGNAL_CSIG )) + goto on_error; +/* Do a clone3() with NSIG < exit_signal < CSIG */ +if (test_clone3 (0 ,CLONE3_ARGS_SIZE_V0 ,0 , +CLONE3_ARGS_INVAL_EXIT_SIGNAL_NSIG )) + goto on_error;/* * Do a clone3() with sizeof(struct clone_args) + 8 * and all members set to 0.
Signature · 1 line
2.1.4
PATCH v2 3/6 selftests/clone3: use uint64_t for flags parameter
In reply to Eugene SyromiatnikovFlags parameter in both userspace and kernel clone args is 64-bit wide, there's little reason to have it signed and 32-bit in tests.
* tools/testing/selftests/clone3/clone3.c: Include <inttypes.h> and <stdint.h>.
(call_clone3): Change flags parameter type from int to uint64_t. (test_clone3): Change flags parameter type from int to uint64_t; change the format string that prints it accordingly.
--- tools/testing/selftests/clone3/clone3.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
tools/testing/selftests/clone3/clone3.c +6 -3
@@ -4,8 +4,10 @@#define _GNU_SOURCE#include <errno.h> +#include <inttypes.h> #include <linux/types.h> #include <linux/sched.h> +#include <stdint.h> #include <stdio.h> #include <stdlib.h> #include <sys/syscall.h>
@@ -39,7 +41,7 @@ static pid_t raw_clone(struct clone_args *args, size_t size)return syscall (__NR_clone3, args, size); } -static int call_clone3 (int flags,size_t size,enum test_mode test_mode) +static int call_clone3 (uint64_t flags,size_t size,enum test_mode test_mode) {struct clone_args args = {0 };pid_t ppid =-1 ;
@@ -117,12 +119,13 @@ static int call_clone3(int flags, size_t size, enum test_mode test_mode)return 0 ; } -static int test_clone3 (int flags,size_t size,int expected, +static int test_clone3 (uint64_t flags,size_t size,int expected,enum test_mode test_mode) {int ret; -ksft_print_msg ("[%d] Trying clone3() with flags 0x%x (size %d)\n" , +ksft_print_msg ("[%d] Trying clone3() with flags %#" PRIx64" (size %d)" +"\n" ,getpid (), flags, size); ret =call_clone3 (flags, size, test_mode); ksft_print_msg("[%d] clone3() with flags says :%d expected %d\n",
Signature · 1 line
2.1.4
PATCH v2 4/6 selftests/clone3: fix up format strings
In reply to Eugene Syromiatnikov* tools/testing/selftests/clone3/clone3.c (test_clone3): Change format qualifier for printing size field from %d to %zu; place colon right after the word "says".
--- tools/testing/selftests/clone3/clone3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
tools/testing/selftests/clone3/clone3.c +2 -2
@@ -124,11 +124,11 @@ static int test_clone3(uint64_t flags, size_t size, int expected, {int ret; -ksft_print_msg ("[%d] Trying clone3() with flags %#" PRIx64" (size %d)" +ksft_print_msg ("[%d] Trying clone3() with flags %#" PRIx64" (size %zu)" "\n" ,getpid (), flags, size); ret =call_clone3 (flags, size, test_mode); -ksft_print_msg ("[%d] clone3() with flags says :%d expected %d\n" , +ksft_print_msg ("[%d] clone3() with flags says: %d expected %d\n" ,getpid (), ret, expected);if (ret != expected) ksft_exit_fail_msg(
Signature · 1 line
2.1.4
PATCH v2 5/6 selftests/clone3: enable clone3 self-tests on all architectures
In reply to Eugene Syromiatnikovclone3() is available on most architectures, so there's no reason to restrict the respective self-tests to x86_64.
* tools/testing/selftests/clone3/Makefile (TEST_GEN_PROGS): Set always, not only ifeq ($(ARCH),x86_64).
--- tools/testing/selftests/clone3/Makefile | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
tools/testing/selftests/clone3/Makefile +1 -3
@@ -4,8 +4,6 @@ ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/) CFLAGS += -I../../../../usr/include/ -ifeq ($(ARCH),x86_64) - TEST_GEN_PROGS := clone3 clone3_set_tid -endif +TEST_GEN_PROGS := clone3 clone3_set_tid include ../lib.mk
Signature · 1 line
2.1.4
PATCH v2 6/6 selftests: add clone3 to TARGETS
In reply to Eugene Syromiatnikov* tools/testing/selftests/Makefile (TARGETS): Add clone3.
--- tools/testing/selftests/Makefile | 1 + 1 file changed, 1 insertion(+)
tools/testing/selftests/Makefile +1 -0
@@ -4,6 +4,7 @@ TARGETS += bpf TARGETS += breakpoints TARGETS += capabilities TARGETS += cgroup +TARGETS += clone3 TARGETS += cpufreq TARGETS += cpu-hotplug TARGETS += drivers/dma-buf
Signature · 1 line
2.1.4
Quoted 9 lines · Eugene Syromiatnikov
Hello.
This patch set updates clone3 selftest in several aspects:
- adding checks forexit_signalinvalid values handling;
- adding clone3 to selftests targets;
- enabling clone3 tests on all architectures;
- minor cleanups of the clone3 test.Applied on top of brauer/linux.git/for-next.
So I like this series a lot! Testing is very important. And thanks for catching the clone3() exit_signal problem. This way we got to release a non-broken kernel. :)
Some notes: I dropped the set_tid extension from the core process updates for 5.4 because we ended up in a discussion that made it clear we potentially need the ability to restore pids in multiple pid namespaces. This means we need some more discussion and the patchset is delayed for at least one release.
Unfortunately, this also means the test that you have based yours upon does not exist anymore. However, the tests should not be blocked on this. I'd encourage you to talk to Adrian (who is Cced here anyway) and come up with a clone3() test suite I can merge. You can very likely do a Co-Developed-by so no-ones work gets dropped. :)
Ideally I'd like to see:
- verifying passing different struct sizes works correctly
- verify that flag combinations work correctly
- verify that struct members have correct values etc. pp.
We definitely want the exit_signal test as a regression test so it doesn't bite us again!
(Oh, please also add tool/test/selftests/clone3/ to the pidfd/core
process MAINTAINERS entry.)
Thanks!
Christian
Quoted 31 lines · Christian Brauner
Quoted 9 lines · Eugene Syromiatnikov
Hello.
This patch set updates clone3 selftest in several aspects:
- adding checks forexit_signalinvalid values handling;
- adding clone3 to selftests targets;
- enabling clone3 tests on all architectures;
- minor cleanups of the clone3 test.Applied on top of brauer/linux.git/for-next.
So I like this series a lot! Testing is very important. And thanks for catching the
clone3()exit_signalproblem. This way we got to release a non-broken kernel. :)Some notes: I dropped the
set_tidextension from the core process updates for 5.4 because we ended up in a discussion that made it clear we potentially need the ability to restore pids in multiple pid namespaces. This means we need some more discussion and the patchset is delayed for at least one release.
Unfortunately, this also means the test that you have based yours upon does not exist anymore. However, the tests should not be blocked on this. I'd encourage you to talk to Adrian (who is Cced here anyway) and come up with aclone3()test suite I can merge. You can very likely do a Co-Developed-by so no-ones work gets dropped. :)Ideally I'd like to see:
- verifying passing different struct sizes works correctly
- verify that flag combinations work correctly
- verify that struct members have correct values etc. pp.
Quoted 5 lines
We definitely want the
exit_signaltest as a regression test so it doesn't bite us again!(Oh, please also add tool/test/selftests/clone3/ to the pidfd/core
processMAINTAINERSentry.)
Eugene and I have already discussed this. We will resubmit the clone3() selftests in the next few days with all our changes combined.
Adrian
Quoted 32 lines · Adrian Reber
Quoted 31 lines · Christian Brauner
Quoted 9 lines · Eugene Syromiatnikov
Hello.
This patch set updates clone3 selftest in several aspects:
- adding checks forexit_signalinvalid values handling;
- adding clone3 to selftests targets;
- enabling clone3 tests on all architectures;
- minor cleanups of the clone3 test.Applied on top of brauer/linux.git/for-next.
So I like this series a lot! Testing is very important. And thanks for catching the
clone3()exit_signalproblem. This way we got to release a non-broken kernel. :)Some notes: I dropped the
set_tidextension from the core process updates for 5.4 because we ended up in a discussion that made it clear we potentially need the ability to restore pids in multiple pid namespaces. This means we need some more discussion and the patchset is delayed for at least one release.
Unfortunately, this also means the test that you have based yours upon does not exist anymore. However, the tests should not be blocked on this. I'd encourage you to talk to Adrian (who is Cced here anyway) and come up with aclone3()test suite I can merge. You can very likely do a Co-Developed-by so no-ones work gets dropped. :)Ideally I'd like to see:
- verifying passing different struct sizes works correctly
- verify that flag combinations work correctly
- verify that struct members have correct values etc. pp.
Quoted 8 lines
Quoted 5 lines
We definitely want the
exit_signaltest as a regression test so it doesn't bite us again!(Oh, please also add tool/test/selftests/clone3/ to the pidfd/core
processMAINTAINERSentry.)Eugene and I have already discussed this. We will resubmit the
clone3()selftests in the next few days with all our changes combined.
Excellent! Very happy to hear this! :)
Christian