drm/i915: stop conflating HAS_DISPLAY() and disabled display
Subsystems (3)
PATCH RESEND 1/1 drm/i915: stop conflating HAS_DISPLAY() and disabled display
Stop setting ->pipe_mask to zero when display is disabled, allowing us to have different code paths for not actually having display hardware, and having display hardware disabled. This lets us develop those two avenues independently.
There are no functional changes for when there is no display. However, all uses of for_each_pipe() and for_each_pipe_masked() will start running for the disabled display case. Put one of the more significant ones behind checks for INTEL_DISPLAY_ENABLED(), otherwise the cases should not be hit with disabled display, or they seem benign. Fingers crossed.
All in all, this might not be the ideal solution. In fact we may have had something along the lines of this in the past, but we ended up conflating the two cases. Possibly even by recommendation by yours truly; I did not dare dig up that part of the history. But the perfect is the enemy of the good, this is a straightforward change, and lets us get actual work done in both fronts without interfering with each other.
--- drivers/gpu/drm/i915/display/intel_display.c | 12 +++++++----- drivers/gpu/drm/i915/intel_device_info.c | 8 ++------ 2 files changed, 9 insertions(+), 11 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +7 -5
@@ -16281,11 +16281,13 @@ int intel_modeset_init(struct drm_device *dev)INTEL_NUM_PIPES (dev_priv), INTEL_NUM_PIPES(dev_priv) > 1 ? "s" : ""); -for_each_pipe (dev_priv, pipe) { - ret =intel_crtc_init (dev_priv, pipe); -if (ret) { -drm_mode_config_cleanup (dev); -return ret; +if (HAS_DISPLAY (dev_priv) &&INTEL_DISPLAY_ENABLED (dev_priv)) { +for_each_pipe (dev_priv, pipe) { + ret =intel_crtc_init (dev_priv, pipe); +if (ret) { +drm_mode_config_cleanup (dev); +return ret; + } } }
drivers/gpu/drm/i915/intel_device_info.c +2 -6
@@ -894,12 +894,8 @@ void intel_device_info_runtime_init(struct drm_i915_private *dev_priv) runtime->num_sprites[pipe] =1 ; } -if (i915_modparams.disable_display) { -DRM_INFO ("Display disabled (module parameter)\n" ); - info->pipe_mask =0 ; - }else if (HAS_DISPLAY (dev_priv) && - (IS_GEN_RANGE (dev_priv,7 ,8 )) && -HAS_PCH_SPLIT (dev_priv)) { +if (HAS_DISPLAY (dev_priv) &&IS_GEN_RANGE (dev_priv,7 ,8 ) && +HAS_PCH_SPLIT (dev_priv)) {u32 fuse_strap =I915_READ (FUSE_STRAP );u32 sfuse_strap =I915_READ (SFUSE_STRAP );
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915: stop conflating HAS_DISPLAY() and disabled display
== Series Details ==
== Series Details ==
Series: drm/i915: stop conflating HAS_DISPLAY() and disabled display
URL : https://patchwork.freedesktop.org/series/66749/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_6897 -> Patchwork_14418
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/
Known issues
------------
Here are the changes found in Patchwork_14418 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_suspend@basic-s3:
- fi-blb-e6850: [PASS][1] -> [INCOMPLETE][2] ([fdo#107718])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/fi-blb-e6850/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/fi-blb-e6850/igt@[email protected]
* igt@gem_flink_basic@bad-open:
- fi-icl-u3: [PASS][3] -> [DMESG-WARN][4] ([fdo#107724]) +1 similar issue
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/fi-icl-u3/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/fi-icl-u3/igt@[email protected]
* igt@gem_mmap_gtt@basic:
- fi-glk-dsi: [PASS][5] -> [INCOMPLETE][6] ([fdo#103359] / [k.org#198133])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/fi-glk-dsi/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/fi-glk-dsi/igt@[email protected]
* igt@i915_selftest@live_reset:
- fi-icl-u2: [PASS][7] -> [INCOMPLETE][8] ([fdo#107713])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/fi-icl-u2/igt@i915_selftest@live_reset.html
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/fi-icl-u2/igt@i915_selftest@live_reset.html
#### Possible fixes ####
* igt@gem_ctx_create@basic-files:
- {fi-icl-u4}: [INCOMPLETE][9] ([fdo#107713] / [fdo#109100]) -> [PASS][10]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/fi-icl-u4/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/fi-icl-u4/igt@[email protected]
* igt@gem_ctx_switch@legacy-render:
- {fi-icl-guc}: [INCOMPLETE][11] ([fdo#107713] / [fdo#111381]) -> [PASS][12]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/fi-icl-guc/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/fi-icl-guc/igt@[email protected]
* igt@gem_exec_fence@nb-await-default:
- {fi-tgl-u}: [FAIL][13] ([fdo#111562] / [fdo#111597]) -> [PASS][14]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/fi-tgl-u/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/fi-tgl-u/igt@[email protected]
* {igt@i915_selftest@live_gt_timelines}:
- fi-bsw-kefka: [DMESG-WARN][15] ([fdo#111373]) -> [PASS][16]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/fi-bsw-kefka/igt@i915_selftest@live_gt_timelines.html
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/fi-bsw-kefka/igt@i915_selftest@live_gt_timelines.html
* igt@vgem_basic@dmabuf-fence-before:
- fi-icl-u3: [DMESG-WARN][17] ([fdo#107724]) -> [PASS][18] +1 similar issue
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/fi-icl-u3/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/fi-icl-u3/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#103359]: https://bugs.freedesktop.org/show_bug.cgi?id=103359
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
[fdo#107724]: https://bugs.freedesktop.org/show_bug.cgi?id=107724
[fdo#109100]: https://bugs.freedesktop.org/show_bug.cgi?id=109100
[fdo#111373]: https://bugs.freedesktop.org/show_bug.cgi?id=111373
[fdo#111381]: https://bugs.freedesktop.org/show_bug.cgi?id=111381
[fdo#111562]: https://bugs.freedesktop.org/show_bug.cgi?id=111562
[fdo#111597]: https://bugs.freedesktop.org/show_bug.cgi?id=111597
[k.org#198133]: https://bugzilla.kernel.org/show_bug.cgi?id=198133
Participating hosts (55 -> 49)
------------------------------
Additional (1): fi-apl-guc
Missing (7): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-icl-y fi-byt-clapper fi-bdw-samus
Build changes
-------------
* CI: CI-20190529 -> None
* Linux: CI_DRM_6897 -> Patchwork_14418
CI-20190529: 20190529
CI_DRM_6897: 8ee6ca77b45a87f294a219eca4b467425a3ddc73 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5183: 6ddc1a143495baa68dbc909f2a8819ec03c31c8e @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_14418: e61e022df89dd4a0058e6efe0d5828fdddf43b35 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
e61e022df89d drm/i915: stop conflating HAS_DISPLAY() and disabled display
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/index.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for drm/i915: stop conflating HAS_DISPLAY() and disabled display
In reply to Jani Nikula== Series Details ==
== Series Details ==
Series: drm/i915: stop conflating HAS_DISPLAY() and disabled display
URL : https://patchwork.freedesktop.org/series/66749/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_6897_full -> Patchwork_14418_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
Known issues
------------
Here are the changes found in Patchwork_14418_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_balancer@smoke:
- shard-iclb: [PASS][1] -> [SKIP][2] ([fdo#110854])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-iclb2/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-iclb5/igt@[email protected]
* igt@gem_exec_schedule@preempt-bsd:
- shard-iclb: [PASS][3] -> [SKIP][4] ([fdo#111325]) +4 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-iclb5/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-iclb4/igt@[email protected]
* igt@i915_pm_rc6_residency@rc6-accuracy:
- shard-kbl: [PASS][5] -> [SKIP][6] ([fdo#109271])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-kbl1/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-kbl2/igt@[email protected]
* igt@i915_suspend@fence-restore-tiled2untiled:
- shard-apl: [PASS][7] -> [DMESG-WARN][8] ([fdo#108566]) +3 similar issues
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-apl2/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-apl2/igt@[email protected]
- shard-kbl: [PASS][9] -> [DMESG-WARN][10] ([fdo#108566])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-kbl3/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-kbl2/igt@[email protected]
* igt@kms_busy@extended-pageflip-modeset-hang-oldfb-render-a:
- shard-iclb: [PASS][11] -> [INCOMPLETE][12] ([fdo#107713]) +1 similar issue
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-iclb3/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-iclb7/igt@[email protected]
* igt@kms_color@pipe-a-ctm-green-to-red:
- shard-skl: [PASS][13] -> [FAIL][14] ([fdo#107201])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-skl7/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-skl3/igt@[email protected]
* igt@kms_flip@flip-vs-expired-vblank:
- shard-glk: [PASS][15] -> [FAIL][16] ([fdo#105363])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-glk9/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-glk1/igt@[email protected]
* igt@kms_flip@flip-vs-suspend:
- shard-hsw: [PASS][17] -> [INCOMPLETE][18] ([fdo#103540])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-hsw8/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-hsw1/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-shrfb-msflip-blt:
- shard-iclb: [PASS][19] -> [FAIL][20] ([fdo#103167]) +1 similar issue
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-iclb3/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-iclb2/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-1p-rte:
- shard-iclb: [PASS][21] -> [FAIL][22] ([fdo#103167] / [fdo#110378])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-iclb5/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-iclb4/igt@[email protected]
* igt@kms_frontbuffer_tracking@psr-1p-pri-indfb-multidraw:
- shard-skl: [PASS][23] -> [FAIL][24] ([fdo#103167])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-skl7/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-skl3/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-a-coverage-7efc:
- shard-skl: [PASS][25] -> [FAIL][26] ([fdo#108145])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-skl7/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-skl3/igt@[email protected]
* igt@kms_plane_lowres@pipe-a-tiling-y:
- shard-iclb: [PASS][27] -> [FAIL][28] ([fdo#103166])
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-iclb3/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-iclb7/igt@[email protected]
* igt@kms_psr@psr2_basic:
- shard-iclb: [PASS][29] -> [SKIP][30] ([fdo#109441]) +1 similar issue
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-iclb2/igt@kms_psr@psr2_basic.html
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-iclb7/igt@kms_psr@psr2_basic.html
* igt@kms_setmode@basic:
- shard-hsw: [PASS][31] -> [FAIL][32] ([fdo#99912])
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-hsw7/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-hsw2/igt@[email protected]
* igt@prime_busy@hang-bsd2:
- shard-iclb: [PASS][33] -> [SKIP][34] ([fdo#109276]) +15 similar issues
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-iclb4/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-iclb3/igt@[email protected]
#### Possible fixes ####
* igt@gem_ctx_switch@legacy-render-heavy:
- shard-apl: [INCOMPLETE][35] ([fdo#103927]) -> [PASS][36] +1 similar issue
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-apl2/igt@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-apl4/igt@[email protected]
* igt@gem_eio@in-flight-immediate:
- shard-skl: [FAIL][37] ([fdo#105957]) -> [PASS][38]
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-skl7/igt@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-skl4/igt@[email protected]
* igt@gem_exec_schedule@in-order-bsd:
- shard-iclb: [SKIP][39] ([fdo#111325]) -> [PASS][40] +6 similar issues
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-iclb2/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-iclb8/igt@[email protected]
* igt@gem_exec_schedule@independent-bsd2:
- shard-iclb: [SKIP][41] ([fdo#109276]) -> [PASS][42] +18 similar issues
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-iclb8/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-iclb2/igt@[email protected]
* igt@i915_suspend@sysfs-reader:
- shard-apl: [DMESG-WARN][43] ([fdo#108566]) -> [PASS][44] +5 similar issues
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-apl8/igt@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-apl3/igt@[email protected]
* igt@kms_draw_crc@draw-method-xrgb8888-mmap-cpu-ytiled:
- shard-iclb: [FAIL][45] ([fdo#103184] / [fdo#103232]) -> [PASS][46]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-iclb1/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-iclb6/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-suspend:
- shard-kbl: [DMESG-WARN][47] ([fdo#108566]) -> [PASS][48]
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-kbl2/igt@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-kbl3/igt@[email protected]
- shard-iclb: [FAIL][49] ([fdo#103167]) -> [PASS][50] +6 similar issues
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-iclb7/igt@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-iclb3/igt@[email protected]
* igt@kms_plane@plane-panning-bottom-right-suspend-pipe-b-planes:
- shard-skl: [INCOMPLETE][51] ([fdo#104108]) -> [PASS][52]
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-skl1/igt@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-skl1/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-b-coverage-7efc:
- shard-skl: [FAIL][53] ([fdo#108145] / [fdo#110403]) -> [PASS][54]
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-skl6/igt@[email protected]
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-skl9/igt@[email protected]
* igt@kms_psr@psr2_cursor_plane_move:
- shard-iclb: [SKIP][55] ([fdo#109441]) -> [PASS][56] +1 similar issue
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-iclb3/igt@kms_psr@psr2_cursor_plane_move.html
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-iclb2/igt@kms_psr@psr2_cursor_plane_move.html
* igt@kms_setmode@basic:
- shard-apl: [FAIL][57] ([fdo#99912]) -> [PASS][58]
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-apl2/igt@[email protected]
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-apl2/igt@[email protected]
- shard-kbl: [FAIL][59] ([fdo#99912]) -> [PASS][60]
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-kbl3/igt@[email protected]
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-kbl2/igt@[email protected]
* igt@perf@polling:
- shard-skl: [FAIL][61] ([fdo#110728]) -> [PASS][62]
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-skl2/igt@[email protected]
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-skl9/igt@[email protected]
#### Warnings ####
* igt@gem_mocs_settings@mocs-rc6-bsd2:
- shard-iclb: [SKIP][63] ([fdo#109276]) -> [FAIL][64] ([fdo#111330])
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-iclb5/igt@[email protected]
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-iclb1/igt@[email protected]
* igt@gem_mocs_settings@mocs-reset-bsd2:
- shard-iclb: [FAIL][65] ([fdo#111330]) -> [SKIP][66] ([fdo#109276])
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6897/shard-iclb2/igt@[email protected]
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/shard-iclb8/igt@[email protected]
[fdo#103166]: https://bugs.freedesktop.org/show_bug.cgi?id=103166
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103184]: https://bugs.freedesktop.org/show_bug.cgi?id=103184
[fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
[fdo#103540]: https://bugs.freedesktop.org/show_bug.cgi?id=103540
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#104108]: https://bugs.freedesktop.org/show_bug.cgi?id=104108
[fdo#105363]: https://bugs.freedesktop.org/show_bug.cgi?id=105363
[fdo#105957]: https://bugs.freedesktop.org/show_bug.cgi?id=105957
[fdo#107201]: https://bugs.freedesktop.org/show_bug.cgi?id=107201
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108566]: https://bugs.freedesktop.org/show_bug.cgi?id=108566
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#110378]: https://bugs.freedesktop.org/show_bug.cgi?id=110378
[fdo#110403]: https://bugs.freedesktop.org/show_bug.cgi?id=110403
[fdo#110728]: https://bugs.freedesktop.org/show_bug.cgi?id=110728
[fdo#110854]: https://bugs.freedesktop.org/show_bug.cgi?id=110854
[fdo#111325]: https://bugs.freedesktop.org/show_bug.cgi?id=111325
[fdo#111330]: https://bugs.freedesktop.org/show_bug.cgi?id=111330
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
Participating hosts (10 -> 10)
------------------------------
No changes in participating hosts
Build changes
-------------
* CI: CI-20190529 -> None
* Linux: CI_DRM_6897 -> Patchwork_14418
CI-20190529: 20190529
CI_DRM_6897: 8ee6ca77b45a87f294a219eca4b467425a3ddc73 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5183: 6ddc1a143495baa68dbc909f2a8819ec03c31c8e @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_14418: e61e022df89dd4a0058e6efe0d5828fdddf43b35 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14418/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoting Jani Nikula (2019-09-16 10:29:01)
Quoted 34 lines
Stop setting ->pipe_mask to zero when display is disabled, allowing us to have different code paths for not actually having display hardware, and having display hardware disabled. This lets us develop those two avenues independently.
There are no functional changes for when there is no display. However, all uses of
for_each_pipe()andfor_each_pipe_masked()will start running for the disabled display case. Put one of the more significant ones behind checks forINTEL_DISPLAY_ENABLED(), otherwise the cases should not be hit with disabled display, or they seem benign. Fingers crossed.All in all, this might not be the ideal solution. In fact we may have had something along the lines of this in the past, but we ended up conflating the two cases. Possibly even by recommendation by yours truly; I did not dare dig up that part of the history. But the perfect is the enemy of the good, this is a straightforward change, and lets us get actual work done in both fronts without interfering with each other.
Cc Chris Wilson <[email protected]>Cc José Roberto de Souza <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by Jani Nikula <[email protected]>--- drivers/gpu/drm/i915/display/intel_display.c | 12 +++++++----- drivers/gpu/drm/i915/intel_device_info.c | 8 ++------ 2 files changed, 9 insertions(+), 11 deletions(-)drivers/gpu/drm/i915/display/intel_display.c +0
-0@@ -16281,11 +16281,13 @@ int intel_modeset_init(struct drm_device *dev) INTEL_NUM_PIPES(dev_priv),
drivers/gpu/drm/i915/display/intel_display.c int intel_modeset_init(struct drm_device *dev) · line 16286
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +3
-5INTEL_NUM_PIPES(dev_priv) > 1 ? "s" : ""); -for_each_pipe (dev_priv, pipe) { - ret =intel_crtc_init (dev_priv, pipe); -if (ret) { -drm_mode_config_cleanup (dev); -return ret; +if (HAS_DISPLAY (dev_priv) &&INTEL_DISPLAY_ENABLED (dev_priv)) { +for_each_pipe (dev_priv, pipe) { + ret =intel_crtc_init (dev_priv, pipe);
What direction are you planning to take, avoid enabling anything related to display? My worry is that in
we still see weird events like
<7> [444.313823] [drm:i915_redisable_vga_power_on [i915]] Something enabled VGA plane, disabling it
and I'm not sure how you intend to curtail that. (Or if that's even possible.)
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 49 lines · Chris Wilson
Quoting Jani Nikula (2019-09-16 10:29:01)
Quoted 34 lines
Stop setting ->pipe_mask to zero when display is disabled, allowing us to have different code paths for not actually having display hardware, and having display hardware disabled. This lets us develop those two avenues independently.
There are no functional changes for when there is no display. However, all uses of
for_each_pipe()andfor_each_pipe_masked()will start running for the disabled display case. Put one of the more significant ones behind checks forINTEL_DISPLAY_ENABLED(), otherwise the cases should not be hit with disabled display, or they seem benign. Fingers crossed.All in all, this might not be the ideal solution. In fact we may have had something along the lines of this in the past, but we ended up conflating the two cases. Possibly even by recommendation by yours truly; I did not dare dig up that part of the history. But the perfect is the enemy of the good, this is a straightforward change, and lets us get actual work done in both fronts without interfering with each other.
Cc Chris Wilson <[email protected]>Cc José Roberto de Souza <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by Jani Nikula <[email protected]>--- drivers/gpu/drm/i915/display/intel_display.c | 12 +++++++----- drivers/gpu/drm/i915/intel_device_info.c | 8 ++------ 2 files changed, 9 insertions(+), 11 deletions(-)drivers/gpu/drm/i915/display/intel_display.c +0
-0@@ -16281,11 +16281,13 @@ int intel_modeset_init(struct drm_device *dev) INTEL_NUM_PIPES(dev_priv),drivers/gpu/drm/i915/display/intel_display.c int intel_modeset_init(struct drm_device *dev) · line 16286
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +3
-5INTEL_NUM_PIPES(dev_priv) > 1 ? "s" : ""); -for_each_pipe (dev_priv, pipe) { - ret =intel_crtc_init (dev_priv, pipe); -if (ret) { -drm_mode_config_cleanup (dev); -return ret; +if (HAS_DISPLAY (dev_priv) &&INTEL_DISPLAY_ENABLED (dev_priv)) { +for_each_pipe (dev_priv, pipe) { + ret =intel_crtc_init (dev_priv, pipe);What direction are you planning to take, avoid enabling anything related to display? My worry is that in
Quoted 8 lines
we still see weird events like
<7> [444.313823] [drm:i915_redisable_vga_power_on [i915]] Something enabled VGA plane, disabling it
and I'm not sure how you intend to curtail that. (Or if that's even possible.)
The main goal here (in this specific patch) is to decouple disabled but existing display from non-existing display. That lets us develop the two cases independently, and I acknowledge I may have been simple minded enough at some point to believe they could be put in the same bucket.
This patch tries to do the decoupling with the least amount of functional changes to the disabled display case (no matter how broken the status quo is), but also without sprinkling INTEL_DISPLAY_ENABLED() checks at every for_each_display{,_masked}. Some arbitrarily chosen balance.
After this, I'm hoping we can develop the cases independently, without each of them stomping on the other's feet. Who knows, maybe the next patch should revert the hunk you quote above. I do know I'm not signing up for fixing everything about the disabled display path, at least right away, but the point is to remove obstacles.
BR,
Jani.
Signature · 5 lines
Jani Nikula, Intel Open Source Graphics Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 56 lines · Jani Nikula
Quoted 55 lines · Chris Wilson
Quoting Jani Nikula (2019-09-16 10:29:01)
Quoted 34 lines
Stop setting ->pipe_mask to zero when display is disabled, allowing us to have different code paths for not actually having display hardware, and having display hardware disabled. This lets us develop those two avenues independently.
There are no functional changes for when there is no display. However, all uses of
for_each_pipe()andfor_each_pipe_masked()will start running for the disabled display case. Put one of the more significant ones behind checks forINTEL_DISPLAY_ENABLED(), otherwise the cases should not be hit with disabled display, or they seem benign. Fingers crossed.All in all, this might not be the ideal solution. In fact we may have had something along the lines of this in the past, but we ended up conflating the two cases. Possibly even by recommendation by yours truly; I did not dare dig up that part of the history. But the perfect is the enemy of the good, this is a straightforward change, and lets us get actual work done in both fronts without interfering with each other.
Cc Chris Wilson <[email protected]>Cc José Roberto de Souza <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by Jani Nikula <[email protected]>--- drivers/gpu/drm/i915/display/intel_display.c | 12 +++++++----- drivers/gpu/drm/i915/intel_device_info.c | 8 ++------ 2 files changed, 9 insertions(+), 11 deletions(-)drivers/gpu/drm/i915/display/intel_display.c +0
-0@@ -16281,11 +16281,13 @@ int intel_modeset_init(struct drm_device *dev) INTEL_NUM_PIPES(dev_priv),drivers/gpu/drm/i915/display/intel_display.c int intel_modeset_init(struct drm_device *dev) · line 16286
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +3
-5INTEL_NUM_PIPES(dev_priv) > 1 ? "s" : ""); -for_each_pipe (dev_priv, pipe) { - ret =intel_crtc_init (dev_priv, pipe); -if (ret) { -drm_mode_config_cleanup (dev); -return ret; +if (HAS_DISPLAY (dev_priv) &&INTEL_DISPLAY_ENABLED (dev_priv)) { +for_each_pipe (dev_priv, pipe) { + ret =intel_crtc_init (dev_priv, pipe);What direction are you planning to take, avoid enabling anything related to display? My worry is that in
we still see weird events like
<7> [444.313823] [drm:i915_redisable_vga_power_on [i915]] Something enabled VGA plane, disabling it
Quoted 7 lines
Quoted 2 lines
and I'm not sure how you intend to curtail that. (Or if that's even possible.)
The main goal here (in this specific patch) is to decouple disabled but existing display from non-existing display. That lets us develop the two cases independently, and I acknowledge I may have been simple minded enough at some point to believe they could be put in the same bucket.
What's the actual use case for the "disabled but existing display"?
So far I've thought that the only use case is regression testing of the "hw has no display" case on hw which in fact has a display. If we have separate codepaths we can't do that effectively. At which point we might as well get rid of the "disable display" capability entirely.
But maybe I'm missing something...
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoting Ville Syrjälä (2019-09-16 15:27:40)
Quoted 7 lines · Jani Nikula
Quoted 4 lines
The main goal here (in this specific patch) is to decouple disabled but existing display from non-existing display. That lets us develop the two cases independently, and I acknowledge I may have been simple minded enough at some point to believe they could be put in the same bucket.
What's the actual use case for the "disabled but existing display"?
There are 2 reasons why I have it enabled for the live gem selftests. Not setting up the display makes module reload faster, and the other reason is that I hoped to avoid any spurious interactions (random hotplug events) in the middle of the stress tests.
The latter usecase I would suggest applies to headless servers, where we want to minimise random events.
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 65 lines · Ville Syrjälä
Quoted 56 lines · Jani Nikula
Quoted 55 lines · Chris Wilson
Quoting Jani Nikula (2019-09-16 10:29:01)
Quoted 34 lines
Stop setting ->pipe_mask to zero when display is disabled, allowing us to have different code paths for not actually having display hardware, and having display hardware disabled. This lets us develop those two avenues independently.
There are no functional changes for when there is no display. However, all uses of
for_each_pipe()andfor_each_pipe_masked()will start running for the disabled display case. Put one of the more significant ones behind checks forINTEL_DISPLAY_ENABLED(), otherwise the cases should not be hit with disabled display, or they seem benign. Fingers crossed.All in all, this might not be the ideal solution. In fact we may have had something along the lines of this in the past, but we ended up conflating the two cases. Possibly even by recommendation by yours truly; I did not dare dig up that part of the history. But the perfect is the enemy of the good, this is a straightforward change, and lets us get actual work done in both fronts without interfering with each other.
Cc Chris Wilson <[email protected]>Cc José Roberto de Souza <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by Jani Nikula <[email protected]>--- drivers/gpu/drm/i915/display/intel_display.c | 12 +++++++----- drivers/gpu/drm/i915/intel_device_info.c | 8 ++------ 2 files changed, 9 insertions(+), 11 deletions(-)drivers/gpu/drm/i915/display/intel_display.c +0
-0@@ -16281,11 +16281,13 @@ int intel_modeset_init(struct drm_device *dev) INTEL_NUM_PIPES(dev_priv),drivers/gpu/drm/i915/display/intel_display.c int intel_modeset_init(struct drm_device *dev) · line 16286
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +3
-5INTEL_NUM_PIPES(dev_priv) > 1 ? "s" : ""); -for_each_pipe (dev_priv, pipe) { - ret =intel_crtc_init (dev_priv, pipe); -if (ret) { -drm_mode_config_cleanup (dev); -return ret; +if (HAS_DISPLAY (dev_priv) &&INTEL_DISPLAY_ENABLED (dev_priv)) { +for_each_pipe (dev_priv, pipe) { + ret =intel_crtc_init (dev_priv, pipe);What direction are you planning to take, avoid enabling anything related to display? My worry is that in
we still see weird events like
<7> [444.313823] [drm:i915_redisable_vga_power_on [i915]] Something enabled VGA plane, disabling it
Quoted 7 lines
Quoted 2 lines
and I'm not sure how you intend to curtail that. (Or if that's even possible.)
The main goal here (in this specific patch) is to decouple disabled but existing display from non-existing display. That lets us develop the two cases independently, and I acknowledge I may have been simple minded enough at some point to believe they could be put in the same bucket.
Quoted 7 lines
What's the actual use case for the "disabled but existing display"?
So far I've thought that the only use case is regression testing of the "hw has no display" case on hw which in fact has a display. If we have separate codepaths we can't do that effectively. At which point we might as well get rid of the "disable display" capability entirely.
The problem seems to be that we simply can't have the same code paths, with e.g. bios enabling display hw behind our backs. And patching either code path with just one knob causes problems to the other. So I want to decouple the two to make our lives easier for the immediate future.
If we can think of better ways to do this, and better utilize shared code paths, the decoupling doesn't really prevent us from doing that either. One idea was probing, then disabling everything, and either using -EPROBE_DEFER or reprobing and then pretending there is no display.
But right now this is getting in the way. Need to unblock work. Later we can re-evaluate whether we need display disable or not and how to best support it.
Pushed the patch, thanks for review. Does not have to mean end of discussion though.
BR,
Jani.
Signature · 5 lines
Jani Nikula, Intel Open Source Graphics Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoting Jani Nikula (2019-09-16 10:29:01)
Quoted 19 lines
Stop setting ->pipe_mask to zero when display is disabled, allowing us to have different code paths for not actually having display hardware, and having display hardware disabled. This lets us develop those two avenues independently.
There are no functional changes for when there is no display. However, all uses of
for_each_pipe()andfor_each_pipe_masked()will start running for the disabled display case. Put one of the more significant ones behind checks forINTEL_DISPLAY_ENABLED(), otherwise the cases should not be hit with disabled display, or they seem benign. Fingers crossed.All in all, this might not be the ideal solution. In fact we may have had something along the lines of this in the past, but we ended up conflating the two cases. Possibly even by recommendation by yours truly; I did not dare dig up that part of the history. But the perfect is the enemy of the good, this is a straightforward change, and lets us get actual work done in both fronts without interfering with each other.
Quoted 4 lines
Cc Chris Wilson <[email protected]>Cc José Roberto de Souza <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by Jani Nikula <[email protected]>
It doesn't fall over, which is impressive enough.
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx