Skip to contentSkip to conversation

drm/i915: Restrict qgv points which don't have enough bandwidth.

PATCH Superseded Stanislav Lisovskiy 3 participants 6 messages Sep 20, 2019 – Sep 21, 2019

Subsystems (3)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 drm/i915: Restrict qgv points which don't have enough bandwidth.

According to BSpec 53998, we should try to restrict qgv points, which can't provide enough bandwidth for desired display configuration.

Currently we are just comparing against all of those and take minimum(worst case).

v2: Fixed wrong PCode reply mask, removed hardcoded
values.

---
 drivers/gpu/drm/i915/display/intel_bw.c | 58 +++++++++++++++++++++++--
 drivers/gpu/drm/i915/i915_reg.h         |  3 ++
 2 files changed, 58 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/display/intel_bw.c +55 -3
index cd58e47ab7b2..7653cbdb0ee4 100644
@@ -90,6 +90,26 @@ static int icl_pcode_read_qgv_point_info(struct drm_i915_private *dev_priv,
 	return 0;
 }
 
+static int icl_pcode_restrict_qgv_points(struct drm_i915_private *dev_priv, u32 points_mask)
+{
+	int ret;
+
+	/* bspec says to keep retrying for at least 1 ms */
+	ret = skl_pcode_request(dev_priv, ICL_PCODE_SAGV_DE_MEM_SS_CONFIG,
+				points_mask,
+				GEN11_PCODE_POINTS_RESTRICTED_MASK,
+				GEN11_PCODE_POINTS_RESTRICTED,
+				1);
+
+	if (ret < 0) {
+		DRM_ERROR("Failed to disable qgv points (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+
 static int icl_get_qgv_points(struct drm_i915_private *dev_priv,
 			      struct intel_qgv_info *qi)
 {
@@ -354,7 +374,9 @@ int intel_bw_atomic_check(struct intel_atomic_state *state)
 	unsigned int data_rate, max_data_rate;
 	unsigned int num_active_planes;
 	struct intel_crtc *crtc;
-	int i;
+	int i, ret;
+	struct intel_qgv_info qi = {};
+	u32 points_mask = 0;
 
 	/* FIXME earlier gens need some checks too */
 	if (INTEL_GEN(dev_priv) < 11)
@@ -398,10 +420,40 @@ int intel_bw_atomic_check(struct intel_atomic_state *state)
 	data_rate = intel_bw_data_rate(dev_priv, bw_state);
 	num_active_planes = intel_bw_num_active_planes(dev_priv, bw_state);
 
-	max_data_rate = intel_max_data_rate(dev_priv, num_active_planes);
-
 	data_rate = DIV_ROUND_UP(data_rate, 1000);
 
+	ret = icl_get_qgv_points(dev_priv, &qi);
+	if (ret < 0) {
+		goto fallback;
+	}
+
+	for (i = 0; i < qi.num_points; i++) {
+		max_data_rate = icl_max_bw(dev_priv, num_active_planes, i);
+		if (max_data_rate < data_rate) {
+			DRM_DEBUG_KMS("QGV point %d: max bw %d required %d restricted\n",
+				      i, max_data_rate, data_rate);
+			points_mask |= 1 << i;
+		} else
+			DRM_DEBUG_KMS("QGV point %d: max bw %d required %d unrestricted\n",
+				      i, max_data_rate, data_rate);
+	}
+
+	if (points_mask >= ((1 << qi.num_points) - 1)) {
+		DRM_DEBUG_KMS("Could not find any suitable QGV points\n");
+		return -EINVAL;
+	}
+
+	ret = icl_pcode_restrict_qgv_points(dev_priv, points_mask);
+	if (ret < 0) {
+		DRM_DEBUG_KMS("Could not restrict required gqv points(%d)\n", ret);
+		goto fallback;
+	}
+
+	return 0;
+
+fallback:
+	max_data_rate = intel_max_data_rate(dev_priv, num_active_planes);
+
 	if (data_rate > max_data_rate) {
 		DRM_DEBUG_KMS("Bandwidth %u MB/s exceeds max available %d MB/s (%d active planes)\n",
 			      data_rate, max_data_rate, num_active_planes);
drivers/gpu/drm/i915/i915_reg.h +3 -0
index bf37ecebc82f..fe327fee8781 100644
@@ -8845,6 +8845,7 @@ enum {
 #define   ICL_PCODE_MEM_SUBSYSYSTEM_INFO	0xd
 #define     ICL_PCODE_MEM_SS_READ_GLOBAL_INFO	(0x0 << 8)
 #define     ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO(point)	(((point) << 16) | (0x1 << 8))
+#define   ICL_PCODE_SAGV_DE_MEM_SS_CONFIG	0xe
 #define   GEN6_PCODE_READ_D_COMP		0x10
 #define   GEN6_PCODE_WRITE_D_COMP		0x11
 #define   HSW_PCODE_DE_WRITE_FREQ_REQ		0x17
@@ -8856,6 +8857,8 @@ enum {
 #define     GEN9_SAGV_DISABLE			0x0
 #define     GEN9_SAGV_IS_DISABLED		0x1
 #define     GEN9_SAGV_ENABLE			0x3
+#define GEN11_PCODE_POINTS_RESTRICTED		0x0
+#define GEN11_PCODE_POINTS_RESTRICTED_MASK	0x1
 #define GEN6_PCODE_DATA				_MMIO(0x138128)
 #define   GEN6_PCODE_FREQ_IA_RATIO_SHIFT	8
 #define   GEN6_PCODE_FREQ_RING_RATIO_SHIFT	16
Signature · 6 lines
2.17.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw
Quoted 59 lines · Stanislav Lisovskiy

According to BSpec 53998, we should try to restrict qgv points, which can't provide enough bandwidth for desired display configuration.

Currently we are just comparing against all of those and take minimum(worst case).

v2: Fixed wrong PCode reply mask, removed hardcoded
values.

---
 drivers/gpu/drm/i915/display/intel_bw.c | 58 +++++++++++++++++++++++--
 drivers/gpu/drm/i915/i915_reg.h         |  3 ++
 2 files changed, 58 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/display/intel_bw.c +23 -1
index cd58e47ab7b2..7653cbdb0ee4 100644
@@ -90,6 +90,26 @@ static int icl_pcode_read_qgv_point_info(struct drm_i915_private *dev_priv,
 	return 0;
 }
 
+static int icl_pcode_restrict_qgv_points(struct drm_i915_private *dev_priv, u32 points_mask)
+{
+	int ret;
+
+	/* bspec says to keep retrying for at least 1 ms */
+	ret = skl_pcode_request(dev_priv, ICL_PCODE_SAGV_DE_MEM_SS_CONFIG,
+				points_mask,
+				GEN11_PCODE_POINTS_RESTRICTED_MASK,
+				GEN11_PCODE_POINTS_RESTRICTED,
+				1);
+
+	if (ret < 0) {
+		DRM_ERROR("Failed to disable qgv points (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+
 static int icl_get_qgv_points(struct drm_i915_private *dev_priv,
 			      struct intel_qgv_info *qi)
 {
@@ -354,7 +374,9 @@ int intel_bw_atomic_check(struct intel_atomic_state *state)
 	unsigned int data_rate, max_data_rate;
 	unsigned int num_active_planes;
 	struct intel_crtc *crtc;
-	int i;
+	int i, ret;
+	struct intel_qgv_info qi = {};
+	u32 points_mask = 0;
 
 	/* FIXME earlier gens need some checks too */
 	if (INTEL_GEN(dev_priv) < 11)

drivers/gpu/drm/i915/display/intel_bw.c int intel_bw_atomic_check(struct intel_atomic_state *state) · line 427

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_bw.c +3 -2
@@ -398,10 +420,40 @@ int intel_bw_atomic_check(struct intel_atomic_state *state)
 	data_rate = intel_bw_data_rate(dev_priv, bw_state);
 	num_active_planes = intel_bw_num_active_planes(dev_priv, bw_state);
 
-	max_data_rate = intel_max_data_rate(dev_priv, num_active_planes);
-
 	data_rate = DIV_ROUND_UP(data_rate, 1000);
 
+	ret = icl_get_qgv_points(dev_priv, &qi);
+	if (ret < 0) {
+		goto fallback;

If we don't have that we don't have any idea about bw limits. So probably just return 0 here.

drivers/gpu/drm/i915/display/intel_bw.c int intel_bw_atomic_check(struct intel_atomic_state *state) · line 435

Quoted 8 lines
drivers/gpu/drm/i915/display/intel_bw.c +8 -0
+	}
+
+	for (i = 0; i < qi.num_points; i++) {
+		max_data_rate = icl_max_bw(dev_priv, num_active_planes, i);
+		if (max_data_rate < data_rate) {
+			DRM_DEBUG_KMS("QGV point %d: max bw %d required %d restricted\n",
+				      i, max_data_rate, data_rate);
+			points_mask |= 1 << i;

I think just marking the accepted levels in the mask would make things simpler...

drivers/gpu/drm/i915/display/intel_bw.c int intel_bw_atomic_check(struct intel_atomic_state *state) · line 441

Quoted 6 lines
drivers/gpu/drm/i915/display/intel_bw.c +6 -0
+		} else
+			DRM_DEBUG_KMS("QGV point %d: max bw %d required %d unrestricted\n",
+				      i, max_data_rate, data_rate);
+	}
+
+	if (points_mask >= ((1 << qi.num_points) - 1)) {

... eg. this can then just be 'if (points_mask == 0)'

drivers/gpu/drm/i915/display/intel_bw.c int intel_bw_atomic_check(struct intel_atomic_state *state) · line 449

Quoted 8 lines
drivers/gpu/drm/i915/display/intel_bw.c +8 -0
+		DRM_DEBUG_KMS("Could not find any suitable QGV points\n");
+		return -EINVAL;
+	}
+
+	ret = icl_pcode_restrict_qgv_points(dev_priv, points_mask);
+	if (ret < 0) {
+		DRM_DEBUG_KMS("Could not restrict required gqv points(%d)\n", ret);
+		goto fallback;

Seems like dead code to me.

We'll need to account for the SAGV yes/no in here as well. That is, if SAGV is off due to watermarks we'll need to restrict things to the highest QGV point only. Also using both the QGV point restriction pcode command and the legacy SAGV pcode command at the same time sounds rather risky to me. I suspect pcode might not expect that. So we need to rework this on a slightly bigger scale.

Quoted 38 lines
drivers/gpu/drm/i915/display/intel_bw.c +7 -0
+	}
+
+	return 0;
+
+fallback:
+	max_data_rate = intel_max_data_rate(dev_priv, num_active_planes);
+
 	if (data_rate > max_data_rate) {
 		DRM_DEBUG_KMS("Bandwidth %u MB/s exceeds max available %d MB/s (%d active planes)\n",
 			      data_rate, max_data_rate, num_active_planes);
drivers/gpu/drm/i915/i915_reg.h +3 -0
index bf37ecebc82f..fe327fee8781 100644
@@ -8845,6 +8845,7 @@ enum {
 #define   ICL_PCODE_MEM_SUBSYSYSTEM_INFO	0xd
 #define     ICL_PCODE_MEM_SS_READ_GLOBAL_INFO	(0x0 << 8)
 #define     ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO(point)	(((point) << 16) | (0x1 << 8))
+#define   ICL_PCODE_SAGV_DE_MEM_SS_CONFIG	0xe
 #define   GEN6_PCODE_READ_D_COMP		0x10
 #define   GEN6_PCODE_WRITE_D_COMP		0x11
 #define   HSW_PCODE_DE_WRITE_FREQ_REQ		0x17
@@ -8856,6 +8857,8 @@ enum {
 #define     GEN9_SAGV_DISABLE			0x0
 #define     GEN9_SAGV_IS_DISABLED		0x1
 #define     GEN9_SAGV_ENABLE			0x3
+#define GEN11_PCODE_POINTS_RESTRICTED		0x0
+#define GEN11_PCODE_POINTS_RESTRICTED_MASK	0x1
 #define GEN6_PCODE_DATA				_MMIO(0x138128)
 #define   GEN6_PCODE_FREQ_IA_RATIO_SHIFT	8
 #define   GEN6_PCODE_FREQ_RING_RATIO_SHIFT	16
Signature · 6 lines
2.17.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 6 lines
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw
Quoted 121 lines · Ville Syrjälä
Quoted 68 lines · Stanislav Lisovskiy

According to BSpec 53998, we should try to restrict qgv points, which can't provide enough bandwidth for desired display configuration.

Currently we are just comparing against all of those and take minimum(worst case).

v2: Fixed wrong PCode reply mask, removed hardcoded
values.

---
 drivers/gpu/drm/i915/display/intel_bw.c | 58
+++++++++++++++++++++++--
 drivers/gpu/drm/i915/i915_reg.h         |  3 ++
 2 files changed, 58 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/display/intel_bw.c +20 -0
index cd58e47ab7b2..7653cbdb0ee4 100644
@@ -90,6 +90,26 @@ static int icl_pcode_read_qgv_point_info(struct
 drm_i915_private *dev_priv,
 	return 0;
 }
 
+static int icl_pcode_restrict_qgv_points(struct drm_i915_private
 *dev_priv, u32 points_mask)
+{
+	int ret;
+
+	/* bspec says to keep retrying for at least 1 ms */
+	ret = skl_pcode_request(dev_priv,
 ICL_PCODE_SAGV_DE_MEM_SS_CONFIG,
+				points_mask,
+				GEN11_PCODE_POINTS_RESTRICTED_MASK,
+				GEN11_PCODE_POINTS_RESTRICTED,
+				1);
+
+	if (ret < 0) {
+		DRM_ERROR("Failed to disable qgv points (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+

static int icl_get_qgv_points(struct drm_i915_private *dev_priv,

drivers/gpu/drm/i915/display/intel_bw.c +3 -1
 			      struct intel_qgv_info *qi)
 {
@@ -354,7 +374,9 @@ int intel_bw_atomic_check(struct
 intel_atomic_state *state)
 	unsigned int data_rate, max_data_rate;
 	unsigned int num_active_planes;
 	struct intel_crtc *crtc;
-	int i;
+	int i, ret;
+	struct intel_qgv_info qi = {};
+	u32 points_mask = 0;
 
 	/* FIXME earlier gens need some checks too */
drivers/gpu/drm/i915/display/intel_bw.c +0 -0
 	if (INTEL_GEN(dev_priv) < 11)
@@ -398,10 +420,40 @@ int intel_bw_atomic_check(struct
 intel_atomic_state *state)
 	data_rate = intel_bw_data_rate(dev_priv, bw_state);
 	num_active_planes = intel_bw_num_active_planes(dev_priv,

drivers/gpu/drm/i915/display/intel_bw.c int intel_bw_atomic_check(struct · line 430

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_bw.c +3 -2
 bw_state);
 
-	max_data_rate = intel_max_data_rate(dev_priv,
 num_active_planes);
-
 	data_rate = DIV_ROUND_UP(data_rate, 1000);
 
+	ret = icl_get_qgv_points(dev_priv, &qi);
+	if (ret < 0) {
+		goto fallback;

If we don't have that we don't have any idea about bw limits. So probably just return 0 here.

drivers/gpu/drm/i915/display/intel_bw.c int intel_bw_atomic_check(struct intel_atomic_state *state) · line 435

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_bw.c +4 -0
+	}
+
+	for (i = 0; i < qi.num_points; i++) {
+		max_data_rate = icl_max_bw(dev_priv, num_active_planes,

i);

drivers/gpu/drm/i915/display/intel_bw.c +2 -0
+		if (max_data_rate < data_rate) {
+			DRM_DEBUG_KMS("QGV point %d: max bw %d required

%d restricted\n",

drivers/gpu/drm/i915/display/intel_bw.c +2 -0
+				      i, max_data_rate, data_rate);
+			points_mask |= 1 << i;

I think just marking the accepted levels in the mask would make things
simpler...

drivers/gpu/drm/i915/display/intel_bw.c int intel_bw_atomic_check(struct intel_atomic_state *state) · line 441

Quoted 7 lines
drivers/gpu/drm/i915/display/intel_bw.c +2 -0
+		} else
+			DRM_DEBUG_KMS("QGV point %d: max bw %d required

%d unrestricted\n",

drivers/gpu/drm/i915/display/intel_bw.c +4 -0
+				      i, max_data_rate, data_rate);
+	}
+
+	if (points_mask >= ((1 << qi.num_points) - 1)) {

... eg. this can then just be 'if (points_mask == 0)'

drivers/gpu/drm/i915/display/intel_bw.c

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_bw.c +1 -0
+		DRM_DEBUG_KMS("Could not find any suitable QGV

points\n");

drivers/gpu/drm/i915/display/intel_bw.c +6 -0
+		return -EINVAL;
+	}
+
+	ret = icl_pcode_restrict_qgv_points(dev_priv, points_mask);
+	if (ret < 0) {
+		DRM_DEBUG_KMS("Could not restrict required gqv

points(%d)\n", ret);

drivers/gpu/drm/i915/display/intel_bw.c +1 -0
+		goto fallback;

Seems like dead code to me.

Quoted 8 lines

We'll need to account for the SAGV yes/no in here as well. That is, if
SAGV is off due to watermarks we'll need to restrict things to the highest QGV point only. Also using both the QGV point restriction pcode command and the legacy SAGV pcode command at the same time sounds
rather risky to me. I suspect pcode might not expect that. So we need to rework this on a slightly bigger scale.

Well, I suspected that it's not going to be that easy..

Probably you mean that this has to be somehow put in sync with intel_disable_sagv calls, so we need to mutually exclude those and/or take into account.

Quoted 41 lines
Quoted 40 lines
drivers/gpu/drm/i915/display/intel_bw.c +6 -0
+	}
+
+	return 0;
+
+fallback:
+	max_data_rate = intel_max_data_rate(dev_priv,

num_active_planes);

drivers/gpu/drm/i915/display/intel_bw.c +1 -0
+
 	if (data_rate > max_data_rate) {
 		DRM_DEBUG_KMS("Bandwidth %u MB/s exceeds max available

%d MB/s (%d active planes)\n",
data_rate, max_data_rate,
num_active_planes);

drivers/gpu/drm/i915/i915_reg.h +1 -0
index bf37ecebc82f..fe327fee8781 100644
@@ -8845,6 +8845,7 @@ enum {
 #define   ICL_PCODE_MEM_SUBSYSYSTEM_INFO	0xd
 #define     ICL_PCODE_MEM_SS_READ_GLOBAL_INFO	(0x0 << 8)
 #define     ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO(point)	(((poin
 t) << 16) | (0x1 << 8))
+#define   ICL_PCODE_SAGV_DE_MEM_SS_CONFIG	0xe
 #define   GEN6_PCODE_READ_D_COMP		0x10
 #define   GEN6_PCODE_WRITE_D_COMP		0x11

#define HSW_PCODE_DE_WRITE_FREQ_REQ 0x17

drivers/gpu/drm/i915/i915_reg.h +2 -0
@@ -8856,6 +8857,8 @@ enum {
 #define     GEN9_SAGV_DISABLE			0x0
 #define     GEN9_SAGV_IS_DISABLED		0x1
 #define     GEN9_SAGV_ENABLE			0x3
+#define GEN11_PCODE_POINTS_RESTRICTED		0x0
+#define GEN11_PCODE_POINTS_RESTRICTED_MASK	0x1
 #define GEN6_PCODE_DATA				_MMIO(0x138128)
 #define   GEN6_PCODE_FREQ_IA_RATIO_SHIFT	8
 #define   GEN6_PCODE_FREQ_RING_RATIO_SHIFT	16
Signature · 1 line
2.17.1
Quoted 6 lines
Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#3 lore raw

✗ Fi.CI.CHECKPATCH: warning for drm/i915: Restrict qgv points which don't have enough bandwidth. (rev2)

In reply to Stanislav Lisovskiy
== Series Details ==

== Series Details ==

Series: drm/i915: Restrict qgv points which don't have enough bandwidth. (rev2)
URL : https://patchwork.freedesktop.org/series/66993/
State : warning

== Summary ==

$ dim checkpatch origin/drm-tip
58676dcb1195 drm/i915: Restrict qgv points which don't have enough bandwidth.
-:46: CHECK:LINE_SPACING: Please don't use multiple blank lines
#46: FILE: drivers/gpu/drm/i915/display/intel_bw.c:109:
+
+

-:70: WARNING:BRACES: braces {} are not necessary for single statement blocks #70: FILE: drivers/gpu/drm/i915/display/intel_bw.c:416:
+ if (ret < 0) {
+ goto fallback;
+ }

-:80: CHECK:BRACES: Unbalanced braces around else statement #80: FILE: drivers/gpu/drm/i915/display/intel_bw.c:426:
+ } else

total: 0 errors, 1 warnings, 2 checks, 93 lines checked

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#4 lore raw

✓ Fi.CI.BAT: success for drm/i915: Restrict qgv points which don't have enough bandwidth. (rev2)

In reply to Stanislav Lisovskiy
== Series Details ==

== Series Details ==

Series: drm/i915: Restrict qgv points which don't have enough bandwidth. (rev2)
URL : https://patchwork.freedesktop.org/series/66993/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_6928 -> Patchwork_14475
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/

Known issues
------------

Here are the changes found in Patchwork_14475 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_mmap_gtt@basic-read-write-distinct:
- fi-icl-u3: [PASS][1] -> [DMESG-WARN][2] ([fdo#107724]) +1 similar issue
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/fi-icl-u3/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/fi-icl-u3/igt@[email protected]

* igt@i915_module_load@reload:
- fi-icl-u3: [PASS][3] -> [DMESG-WARN][4] ([fdo#107724] / [fdo#111214])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/fi-icl-u3/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/fi-icl-u3/igt@[email protected]

* igt@i915_selftest@live_gem_contexts:
- fi-skl-6770hq: [PASS][5] -> [INCOMPLETE][6] ([fdo#111519] / [fdo#111700])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/fi-skl-6770hq/igt@i915_selftest@live_gem_contexts.html
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/fi-skl-6770hq/igt@i915_selftest@live_gem_contexts.html

* igt@kms_chamelium@hdmi-hpd-fast:
- fi-kbl-7500u: [PASS][7] -> [FAIL][8] ([fdo#111045] / [fdo#111096])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/fi-kbl-7500u/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/fi-kbl-7500u/igt@[email protected]

#### Possible fixes ####

* igt@gem_ctx_switch@legacy-render:
- fi-icl-u2: [INCOMPLETE][9] ([fdo#107713] / [fdo#111381]) -> [PASS][10]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/fi-icl-u2/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/fi-icl-u2/igt@[email protected]

* igt@i915_module_load@reload:
- fi-blb-e6850: [INCOMPLETE][11] ([fdo#107718]) -> [PASS][12]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/fi-blb-e6850/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/fi-blb-e6850/igt@[email protected]

* igt@kms_addfb_basic@addfb25-x-tiled:
- fi-icl-u3: [DMESG-WARN][13] ([fdo#107724]) -> [PASS][14] +1 similar issue
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/fi-icl-u3/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/fi-icl-u3/igt@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
[fdo#107724]: https://bugs.freedesktop.org/show_bug.cgi?id=107724
[fdo#110566]: https://bugs.freedesktop.org/show_bug.cgi?id=110566
[fdo#111045]: https://bugs.freedesktop.org/show_bug.cgi?id=111045
[fdo#111096]: https://bugs.freedesktop.org/show_bug.cgi?id=111096
[fdo#111214]: https://bugs.freedesktop.org/show_bug.cgi?id=111214
[fdo#111381]: https://bugs.freedesktop.org/show_bug.cgi?id=111381
[fdo#111519]: https://bugs.freedesktop.org/show_bug.cgi?id=111519
[fdo#111700]: https://bugs.freedesktop.org/show_bug.cgi?id=111700

Participating hosts (54 -> 47)
------------------------------

Additional (1): fi-hsw-4770r
Missing (8): fi-ilk-m540 fi-hsw-4200u fi-skl-guc fi-byt-squawks fi-bsw-cyan fi-icl-y fi-byt-clapper fi-bdw-samus

Build changes
-------------

* CI: CI-20190529 -> None
* Linux: CI_DRM_6928 -> Patchwork_14475

CI-20190529: 20190529
CI_DRM_6928: 74bb5b031ca11c7036f7be21f42a73a057fc8da8 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5194: 531d3d02d5e7a2a84d61b92b28fa01b822afc399 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_14475: 58676dcb1195c94dc8f6db8978ac7651e16e5a54 @ git://anongit.freedesktop.org/gfx-ci/linux

== Linux commits ==

58676dcb1195 drm/i915: Restrict qgv points which don't have enough bandwidth.

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/index.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#5 lore raw

✗ Fi.CI.IGT: failure for drm/i915: Restrict qgv points which don't have enough bandwidth. (rev2)

In reply to Stanislav Lisovskiy
== Series Details ==

== Series Details ==

Series: drm/i915: Restrict qgv points which don't have enough bandwidth. (rev2)
URL : https://patchwork.freedesktop.org/series/66993/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_6928_full -> Patchwork_14475_full
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with Patchwork_14475_full absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_14475_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in Patchwork_14475_full:

### IGT changes ###

#### Possible regressions ####

* igt@kms_rotation_crc@primary-rotation-180:
- shard-apl: [PASS][1] -> [TIMEOUT][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-apl4/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-apl2/igt@[email protected]

#### Suppressed ####

The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.

* {igt@gem_eio@kms}:
- shard-snb: [INCOMPLETE][3] ([fdo#105411]) -> [DMESG-WARN][4]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-snb1/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-snb7/igt@[email protected]

* {igt@i915_pm_dc@dc6-psr}:
- shard-iclb: [PASS][5] -> [FAIL][6]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb1/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-iclb8/igt@[email protected]

Known issues
------------

Here are the changes found in Patchwork_14475_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_ctx_isolation@vcs1-s3:
- shard-kbl: [PASS][7] -> [DMESG-WARN][8] ([fdo#108566])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-kbl6/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-kbl1/igt@[email protected]

* igt@gem_exec_reloc@basic-write-gtt-noreloc:
- shard-apl: [PASS][9] -> [INCOMPLETE][10] ([fdo#103927])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-apl4/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-apl2/igt@[email protected]

* igt@gem_exec_schedule@preempt-queue-bsd1:
- shard-iclb: [PASS][11] -> [SKIP][12] ([fdo#109276]) +26 similar issues
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb4/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-iclb5/igt@[email protected]

* igt@gem_exec_schedule@reorder-wide-bsd:
- shard-iclb: [PASS][13] -> [SKIP][14] ([fdo#111325]) +2 similar issues
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb3/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-iclb2/igt@[email protected]

* igt@gem_softpin@noreloc-s3:
- shard-skl: [PASS][15] -> [INCOMPLETE][16] ([fdo#104108])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-skl1/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-skl6/igt@[email protected]

* igt@kms_atomic_interruptible@universal-setplane-primary:
- shard-hsw: [PASS][17] -> [INCOMPLETE][18] ([fdo#103540])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-hsw5/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-hsw6/igt@[email protected]

* igt@kms_cursor_crc@pipe-b-cursor-128x42-sliding:
- shard-skl: [PASS][19] -> [FAIL][20] ([fdo#103232])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-skl5/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-skl2/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-shrfb-msflip-blt:
- shard-iclb: [PASS][21] -> [FAIL][22] ([fdo#103167]) +5 similar issues
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb8/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-iclb1/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-b-constant-alpha-min:
- shard-skl: [PASS][23] -> [FAIL][24] ([fdo#108145])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-skl5/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-skl2/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-b-coverage-7efc:
- shard-skl: [PASS][25] -> [FAIL][26] ([fdo#108145] / [fdo#110403])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-skl5/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-skl2/igt@[email protected]

* igt@kms_psr@psr2_sprite_plane_move:
- shard-iclb: [PASS][27] -> [SKIP][28] ([fdo#109441]) +4 similar issues
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb2/igt@kms_psr@psr2_sprite_plane_move.html
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-iclb6/igt@kms_psr@psr2_sprite_plane_move.html

* igt@kms_vblank@pipe-c-ts-continuation-suspend:
- shard-apl: [PASS][29] -> [DMESG-WARN][30] ([fdo#108566]) +3 similar issues
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-apl1/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-apl4/igt@[email protected]

* igt@perf_pmu@cpu-hotplug:
- shard-apl: [PASS][31] -> [TIMEOUT][32] ([fdo#111546])
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-apl4/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-apl2/igt@[email protected]

#### Possible fixes ####

* igt@gem_exec_balancer@smoke:
- shard-iclb: [SKIP][33] ([fdo#110854]) -> [PASS][34]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb5/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-iclb4/igt@[email protected]

* igt@gem_exec_schedule@preempt-other-chain-bsd:
- shard-iclb: [SKIP][35] ([fdo#111325]) -> [PASS][36] +8 similar issues
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb2/igt@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-iclb8/igt@[email protected]

* {igt@gem_mmap_gtt@close-race}:
- shard-apl: [INCOMPLETE][37] ([fdo#103927]) -> [PASS][38] +2 similar issues
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-apl3/igt@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-apl8/igt@[email protected]

* igt@gem_tiled_swapping@non-threaded:
- shard-glk: [DMESG-WARN][39] ([fdo#108686]) -> [PASS][40]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-glk4/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-glk3/igt@[email protected]

* igt@i915_suspend@sysfs-reader:
- shard-apl: [DMESG-WARN][41] ([fdo#108566]) -> [PASS][42] +3 similar issues
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-apl1/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-apl8/igt@[email protected]

* igt@kms_cursor_crc@pipe-c-cursor-suspend:
- shard-skl: [INCOMPLETE][43] ([fdo#110741]) -> [PASS][44]
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-skl6/igt@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-skl10/igt@[email protected]

* igt@kms_flip@flip-vs-dpms-interruptible:
- shard-iclb: [INCOMPLETE][45] ([fdo#107713]) -> [PASS][46]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb1/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-iclb3/igt@[email protected]

* igt@kms_flip@flip-vs-suspend-interruptible:
- shard-snb: [DMESG-WARN][47] ([fdo#102365]) -> [PASS][48]
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-snb4/igt@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-snb4/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-indfb-draw-pwrite:
- shard-iclb: [FAIL][49] ([fdo#103167]) -> [PASS][50] +2 similar issues
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb1/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-indfb-draw-pwrite.html
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-iclb6/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-indfb-draw-pwrite.html

* igt@kms_frontbuffer_tracking@psr-1p-offscren-pri-indfb-draw-mmap-cpu:
- shard-skl: [FAIL][51] ([fdo#103167]) -> [PASS][52]
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-skl10/igt@kms_frontbuffer_tracking@psr-1p-offscren-pri-indfb-draw-mmap-cpu.html
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-skl1/igt@kms_frontbuffer_tracking@psr-1p-offscren-pri-indfb-draw-mmap-cpu.html

* igt@kms_frontbuffer_tracking@psr-suspend:
- shard-skl: [INCOMPLETE][53] ([fdo#104108] / [fdo#106978]) -> [PASS][54]
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-skl9/igt@[email protected]
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-skl9/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-c-coverage-7efc:
- shard-skl: [FAIL][55] ([fdo#108145] / [fdo#110403]) -> [PASS][56]
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-skl4/igt@[email protected]
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-skl10/igt@[email protected]

* igt@kms_plane_cursor@pipe-a-primary-size-128:
- shard-kbl: [DMESG-WARN][57] ([fdo#103558] / [fdo#105602]) -> [PASS][58] +37 similar issues
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-kbl6/igt@[email protected]
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-kbl6/igt@[email protected]

* igt@kms_psr2_su@page_flip:
- shard-iclb: [SKIP][59] ([fdo#109642] / [fdo#111068]) -> [PASS][60]
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb4/igt@kms_psr2_su@page_flip.html
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-iclb2/igt@kms_psr2_su@page_flip.html

* igt@kms_psr@psr2_cursor_render:
- shard-iclb: [SKIP][61] ([fdo#109441]) -> [PASS][62] +1 similar issue
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb3/igt@kms_psr@psr2_cursor_render.html
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-iclb2/igt@kms_psr@psr2_cursor_render.html

* igt@perf@blocking:
- shard-skl: [FAIL][63] ([fdo#110728]) -> [PASS][64]
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-skl7/igt@[email protected]
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-skl1/igt@[email protected]

* igt@prime_busy@hang-bsd2:
- shard-iclb: [SKIP][65] ([fdo#109276]) -> [PASS][66] +22 similar issues
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb8/igt@[email protected]
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-iclb1/igt@[email protected]

#### Warnings ####

* igt@gem_mocs_settings@mocs-isolation-bsd2:
- shard-iclb: [FAIL][67] ([fdo#111330]) -> [SKIP][68] ([fdo#109276])
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb4/igt@[email protected]
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-iclb5/igt@[email protected]

* igt@gem_mocs_settings@mocs-settings-bsd2:
- shard-iclb: [SKIP][69] ([fdo#109276]) -> [FAIL][70] ([fdo#111330])
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb6/igt@[email protected]
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-iclb1/igt@[email protected]

* igt@kms_busy@extended-pageflip-modeset-hang-oldfb-render-d:
- shard-kbl: [SKIP][71] ([fdo#105602] / [fdo#109271] / [fdo#109278]) -> [SKIP][72] ([fdo#109271] / [fdo#109278]) +3 similar issues
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-kbl6/igt@[email protected]
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-kbl6/igt@[email protected]

* igt@kms_dp_dsc@basic-dsc-enable-edp:
- shard-iclb: [SKIP][73] ([fdo#109349]) -> [DMESG-WARN][74] ([fdo#107724])
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb4/igt@[email protected]
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-iclb2/igt@[email protected]

* igt@kms_panel_fitting@legacy:
- shard-kbl: [SKIP][75] ([fdo#105602] / [fdo#109271]) -> [SKIP][76] ([fdo#109271]) +30 similar issues
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-kbl6/igt@[email protected]
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/shard-kbl6/igt@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#102365]: https://bugs.freedesktop.org/show_bug.cgi?id=102365
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
[fdo#103540]: https://bugs.freedesktop.org/show_bug.cgi?id=103540
[fdo#103558]: https://bugs.freedesktop.org/show_bug.cgi?id=103558
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#104108]: https://bugs.freedesktop.org/show_bug.cgi?id=104108
[fdo#105411]: https://bugs.freedesktop.org/show_bug.cgi?id=105411
[fdo#105602]: https://bugs.freedesktop.org/show_bug.cgi?id=105602
[fdo#106978]: https://bugs.freedesktop.org/show_bug.cgi?id=106978
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#107724]: https://bugs.freedesktop.org/show_bug.cgi?id=107724
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108566]: https://bugs.freedesktop.org/show_bug.cgi?id=108566
[fdo#108686]: https://bugs.freedesktop.org/show_bug.cgi?id=108686
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109349]: https://bugs.freedesktop.org/show_bug.cgi?id=109349
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#109642]: https://bugs.freedesktop.org/show_bug.cgi?id=109642
[fdo#110403]: https://bugs.freedesktop.org/show_bug.cgi?id=110403
[fdo#110728]: https://bugs.freedesktop.org/show_bug.cgi?id=110728
[fdo#110741]: https://bugs.freedesktop.org/show_bug.cgi?id=110741
[fdo#110854]: https://bugs.freedesktop.org/show_bug.cgi?id=110854
[fdo#111068]: https://bugs.freedesktop.org/show_bug.cgi?id=111068
[fdo#111325]: https://bugs.freedesktop.org/show_bug.cgi?id=111325
[fdo#111330]: https://bugs.freedesktop.org/show_bug.cgi?id=111330
[fdo#111546]: https://bugs.freedesktop.org/show_bug.cgi?id=111546

Participating hosts (9 -> 9)
------------------------------

No changes in participating hosts

Build changes
-------------

* CI: CI-20190529 -> None
* Linux: CI_DRM_6928 -> Patchwork_14475

CI-20190529: 20190529
CI_DRM_6928: 74bb5b031ca11c7036f7be21f42a73a057fc8da8 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5194: 531d3d02d5e7a2a84d61b92b28fa01b822afc399 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_14475: 58676dcb1195c94dc8f6db8978ac7651e16e5a54 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14475/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx