drm/i915/dp: Fix dsc bpp calculations, v2.
Subsystems (5)
Re: [PATCH 11/23] drm/i915: Try to make bigjoiner work in atomic check.
In reply to Maarten LankhorstQuoted 92 lines · Maarten Lankhorst
When the clock is higher than the dotclock, try with 2 pipes enabled. If we can enable 2, then we will go into big joiner mode, and steal the adjacent crtc.
This only links the crtc's in software, no hardware or plane programming is done yet. Blobs are also copied from the master's
crtc_state, so it doesn't depend at commit time on the othercrtc_state.Signed-off-by Maarten Lankhorst <[email protected]>--- drivers/gpu/drm/i915/display/intel_atomic.c | 15 +- drivers/gpu/drm/i915/display/intel_atomic.h | 3 +- drivers/gpu/drm/i915/display/intel_display.c | 197 +++++++++++++++++- .../drm/i915/display/intel_display_types.h | 11 +- drivers/gpu/drm/i915/display/intel_dp.c | 25 ++- 5 files changed, 228 insertions(+), 23 deletions(-)drivers/gpu/drm/i915/display/intel_atomic.c +8
-7@@ -228,25 +228,26 @@ void intel_crtc_free_hw_state(struct intel_crtc_state *crtc_state)intel_crtc_put_color_blobs (crtc_state); } -void intel_crtc_copy_color_blobs (struct intel_crtc_state *crtc_state) +void intel_crtc_copy_color_blobs (struct intel_crtc_state *crtc_state, +const struct intel_crtc_state *from_crtc_state) {intel_crtc_put_color_blobs (crtc_state); -if (crtc_state->uapi.degamma_lut) +if (from_crtc_state->uapi.degamma_lut) crtc_state->hw.degamma_lut = -drm_property_blob_get (crtc_state->uapi.degamma_lut); +drm_property_blob_get (from_crtc_state->uapi.degamma_lut);else crtc_state->hw.degamma_lut =NULL ; -if (crtc_state->uapi.gamma_lut) +if (from_crtc_state->uapi.gamma_lut) crtc_state->hw.gamma_lut = -drm_property_blob_get (crtc_state->uapi.gamma_lut); +drm_property_blob_get (from_crtc_state->uapi.gamma_lut);else crtc_state->hw.gamma_lut =NULL ; -if (crtc_state->uapi.ctm) +if (from_crtc_state->uapi.ctm) crtc_state->hw.ctm = -drm_property_blob_get (crtc_state->uapi.ctm); +drm_property_blob_get (from_crtc_state->uapi.ctm);else crtc_state->hw.ctm =NULL ; }drivers/gpu/drm/i915/display/intel_atomic.h +2
-1@@ -36,7 +36,8 @@ struct drm_crtc_state *intel_crtc_duplicate_state(struct drm_crtc *crtc);void intel_crtc_destroy_state (struct drm_crtc *crtc,struct drm_crtc_state *state);void intel_crtc_free_hw_state (struct intel_crtc_state *crtc_state); -void intel_crtc_copy_color_blobs (struct intel_crtc_state *crtc_state); +void intel_crtc_copy_color_blobs (struct intel_crtc_state *crtc_state, +const struct intel_crtc_state *from_crtc_state);struct drm_atomic_state *intel_atomic_state_alloc (struct drm_device *dev);void intel_atomic_state_clear (struct drm_atomic_state *state);drivers/gpu/drm/i915/display/intel_display.c +6
-1@@ -7434,7 +7434,7 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc, struct intel_crtc_state *pipe_config) {struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev); -const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode; +struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;int clock_limit = dev_priv->max_dotclk_freq;if (INTEL_GEN (dev_priv) <4 ) {@@ -7451,6 +7451,25 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc, } } +/* +* copy hw mode to transcoder mode. +* This matters mostly for big joiner, which splits the mode in half. +*/ + pipe_config->hw.transcoder_mode = pipe_config->hw.adjusted_mode;
drivers/gpu/drm/i915/display/intel_display.c static int intel_crtc_compute_config(struct intel_crtc *crtc, · line 7468
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +10
-0+if (pipe_config->bigjoiner) { +/* Make sure the crtc config is halved horizontally */ + adjusted_mode->crtc_clock /=2 ; + adjusted_mode->crtc_hdisplay /=2 ; + adjusted_mode->crtc_hblank_start /=2 ; + adjusted_mode->crtc_hblank_end /=2 ; + adjusted_mode->crtc_hsync_start /=2 ; + adjusted_mode->crtc_hsync_end /=2 ; + adjusted_mode->crtc_htotal /=2 ; + adjusted_mode->crtc_hskew /=2 ;
If adjusted_mode is the "pipe mode," does anything other than the size have meaning or matter at that level? Not that halving the rest of these hurts anything, it just seems strange to consider them at the pipe level.
drivers/gpu/drm/i915/display/intel_display.c static void intel_set_pipe_timings(const struct intel_crtc_state *crtc_state)
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_display.c +4
-0+ + pipe_config->pipe_src_w /=2 ; + } +if (adjusted_mode->crtc_clock > clock_limit) { DRM_DEBUG_KMS("requested pixel clock (%d kHz) too high (max: %d kHz, double wide: %s)\n", adjusted_mode->crtc_clock, clock_limit,@@ -8133,7 +8152,7 @@ static void intel_set_pipe_timings(const struct intel_crtc_state *crtc_state)
We may want to rename this function to intel_set_transcoder_timings now that pipe and transcoder are starting to be different.
Quoted 111 lines
drivers/gpu/drm/i915/display/intel_display.c +61
-4struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev);enum pipe pipe = crtc->pipe;enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; -const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; +const struct drm_display_mode *adjusted_mode = &crtc_state->hw.transcoder_mode;u32 crtc_vtotal, crtc_vblank_end;int vsyncshift =0 ;@@ -11774,6 +11793,8 @@ static int intel_crtc_atomic_check(struct drm_crtc *_crtc,to_intel_crtc_state (_crtc_state);int ret;bool mode_changed =needs_modeset (crtc_state); +struct intel_atomic_state *state = +to_intel_atomic_state (crtc_state->uapi.state);if (INTEL_GEN (dev_priv) <5 && !IS_G4X (dev_priv) && mode_changed && !crtc_state->hw.active)@@ -11781,6 +11802,7 @@ static int intel_crtc_atomic_check(struct drm_crtc *_crtc,if (mode_changed && crtc_state->hw.enable && dev_priv->display.crtc_compute_clock && + !crtc_state->bigjoiner_slave && !WARN_ON (crtc_state->shared_dpll)) { ret = dev_priv->display.crtc_compute_clock (crtc, crtc_state);if (ret)@@ -11796,8 +11818,15 @@ static int intel_crtc_atomic_check(struct drm_crtc *_crtc,if (mode_changed || crtc_state->update_pipe || crtc_state->uapi.color_mgmt_changed) { +const struct intel_crtc_state *master_crtc_state = crtc_state; + +if (crtc_state->bigjoiner_slave) + master_crtc_state = +intel_atomic_get_new_crtc_state (state, + crtc_state->bigjoiner_linked_crtc); +/* Copy color blobs to hw state */ -intel_crtc_copy_color_blobs (crtc_state); +intel_crtc_copy_color_blobs (crtc_state, master_crtc_state); ret =intel_color_check (crtc_state);if (ret)@@ -12259,7 +12288,48 @@ static void copy_hw_to_uapi_state(struct intel_crtc_state *crtc_state) crtc_state->uapi.enable = crtc_state->hw.enable; crtc_state->uapi.active = crtc_state->hw.active; crtc_state->uapi.mode = crtc_state->hw.mode; - crtc_state->uapi.adjusted_mode = crtc_state->hw.adjusted_mode; + crtc_state->uapi.adjusted_mode = crtc_state->hw.transcoder_mode; +} + +static int +copy_bigjoiner_crtc_state (struct intel_crtc_state *crtc_state, +const struct intel_crtc_state *from_crtc_state) +{ +struct intel_crtc_state *saved_state; +struct intel_crtc *crtc =to_intel_crtc (crtc_state->uapi.crtc); + + saved_state =kmemdup (from_crtc_state,sizeof (*saved_state),GFP_KERNEL ); +if (!saved_state) +return -ENOMEM ; + + saved_state->uapi = crtc_state->uapi; + saved_state->scaler_state = crtc_state->scaler_state; + saved_state->shared_dpll = crtc_state->shared_dpll; + saved_state->dpll_hw_state = crtc_state->dpll_hw_state; + saved_state->crc_enabled = crtc_state->crc_enabled; + +intel_crtc_free_hw_state (crtc_state); +memcpy (crtc_state, saved_state,sizeof (*crtc_state)); +kfree (saved_state); + +/* Re-init hw state */ +memset (&crtc_state->hw,0 ,sizeof (saved_state->hw)); + crtc_state->hw.enable = from_crtc_state->hw.enable; + crtc_state->hw.active = from_crtc_state->hw.active; + crtc_state->hw.mode = from_crtc_state->hw.mode; + crtc_state->hw.adjusted_mode = from_crtc_state->hw.adjusted_mode; + +/* Some fixups */ + crtc_state->uapi.mode_changed = from_crtc_state->uapi.mode_changed; + crtc_state->uapi.connectors_changed = from_crtc_state->uapi.connectors_changed; + crtc_state->uapi.active_changed = from_crtc_state->uapi.active_changed; + crtc_state->nv12_planes = crtc_state->c8_planes = crtc_state->update_planes =0 ; + crtc_state->bigjoiner_linked_crtc =to_intel_crtc (from_crtc_state->uapi.crtc); + crtc_state->bigjoiner_slave = true; + crtc_state->cpu_transcoder = (enum transcoder )crtc->pipe; + crtc_state->has_audio = false; + +return 0 ; } static int@@ -12432,7 +12502,7 @@ intel_modeset_pipe_config(struct intel_crtc_state *pipe_config) base_bpp, pipe_config->pipe_bpp, pipe_config->dither);/* uapi wants a copy of the adjusted_mode for vblank bookkeeping */ - pipe_config->uapi.adjusted_mode = pipe_config->hw.adjusted_mode; + pipe_config->uapi.adjusted_mode = pipe_config->hw.transcoder_mode;return 0 ; }@@ -13549,6 +13619,109 @@ static void intel_crtc_check_fastset(const struct intel_crtc_state *old_crtc_sta new_crtc_state->has_drrs = old_crtc_state->has_drrs; } +static int intel_atomic_check_bigjoiner (struct intel_atomic_state *state) +{ +struct drm_i915_private *dev_priv =to_i915 (state->base.dev); +struct intel_crtc_state *old_crtc_state, *new_crtc_state, *slave_crtc_state, *master_crtc_state; +struct intel_crtc *crtc, *slave, *master; +int i, ret =0 ;
drivers/gpu/drm/i915/display/intel_display.c static void intel_crtc_check_fastset(const struct intel_crtc_state *old_crtc_sta · line 13637
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +10
-0+ +if (INTEL_GEN (dev_priv) <11 ) +return 0 ; + +for_each_oldnew_intel_crtc_in_state (state, crtc, old_crtc_state, + new_crtc_state, i) { +if (!old_crtc_state->bigjoiner_slave) +continue ; + +if (crtc->pipe ==PIPE_A ) {
Rather than a hardcoded PIPE_A check, should we have a bitmask of pipes that can be big joiner masters somewhere? mask = 0b111 for gen12, but mask = 0b010 for gen11. Then the allowable slaves
would be mask << 1, which would also ensure gen11 doesn't allow a slave on pipe B.
drivers/gpu/drm/i915/display/intel_display.c static void intel_crtc_check_fastset(const struct intel_crtc_state *old_crtc_sta · line 13638
Quoted 1 line
drivers/gpu/drm/i915/display/intel_display.c +1
-0+DRM_ERROR ("Bigjoiner slave on pipe A?\n" );
We should probably just use a WARN_ON() in the condition above since this shouldn't happen unless we screwed up somewhere in the driver.
drivers/gpu/drm/i915/display/intel_display.c static void intel_crtc_check_fastset(const struct intel_crtc_state *old_crtc_sta · line 13646
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_display.c +8
-0+return -EINVAL ; + } + +/* crtc staying in slave mode? */ +if (!new_crtc_state->uapi.enable) +continue ; + +if (needs_modeset (new_crtc_state) || new_crtc_state->update_pipe) {
Won't needs_modeset() always return true here? I.e., if we were a slave previously but didn't bail on the uapi.enable check above, then uapi.enable is flipping from false to true.
Given that enabling the previously-slave CRTC is only possible if the previously-master CRTC is also modesetting in a way that won't need a slave anymore, it seems like the next step would be
master_crtc_state = intel_get_existing_crtc_state() if (!master_crtc_state || !needs_modeset(master_crtc_state))
fail
otherwise we've now overcommitted our slave CRTC.
Quoted 4 lines
drivers/gpu/drm/i915/display/intel_display.c +4
-0+ master = old_crtc_state->bigjoiner_linked_crtc; + master_crtc_state =intel_atomic_get_crtc_state (&state->base, master); +if (IS_ERR (master_crtc_state)) +return PTR_ERR (master_crtc_state);
drivers/gpu/drm/i915/display/intel_display.c static void intel_crtc_check_fastset(const struct intel_crtc_state *old_crtc_sta · line 13660
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +10
-0+ +/* +* Force modeset on master, to recalculate bigjoiner +* state. +* +* If master_crtc_state was not part of the atomic commit, +* we will fail because the master was not deconfigured, +* but at least fail below to unify the checks. +*/ + master_crtc_state->uapi.mode_changed = true;
Should we instead update intel_pipe_config_compare to check bigjoiner fields and prevent fastsets on states currently using the bigjoiner?
Quoted 37 lines
drivers/gpu/drm/i915/display/intel_display.c +37
-0+ + ret =drm_atomic_add_affected_planes (&state->base, &crtc->base); +if (ret) +return ret; + + ret =drm_atomic_add_affected_connectors (&state->base, &crtc->base); +if (ret) +return ret; + } + } + +for_each_oldnew_intel_crtc_in_state (state, crtc, old_crtc_state, + new_crtc_state, i) { +if (!new_crtc_state->uapi.enable || !new_crtc_state->bigjoiner) { +if (!old_crtc_state->bigjoiner) +continue ; + } + +if (!needs_modeset (new_crtc_state) && !new_crtc_state->update_pipe) +continue ; + +if (new_crtc_state->bigjoiner && !new_crtc_state->bigjoiner_slave) { +if (1 + crtc->pipe >=INTEL_NUM_PIPES (dev_priv)) { +DRM_DEBUG_KMS ("Big joiner configuration requires CRTC + 1 to be used, doesn't exist\n" ); +return -EINVAL ; + } + + slave = new_crtc_state->bigjoiner_linked_crtc = +intel_get_crtc_for_pipe (dev_priv, crtc->pipe +1 ); + slave_crtc_state =intel_atomic_get_crtc_state (&state->base, slave); +if (IS_ERR (slave_crtc_state)) +return PTR_ERR (slave_crtc_state); + +if (slave_crtc_state->uapi.enable) { +DRM_DEBUG_KMS ("[CRTC:%d:%s] Big joiner configuration requires this CRTC to be unconfigured\n" , + slave->base.base.id, slave->base.name); +return -EINVAL ;
drivers/gpu/drm/i915/display/intel_display.c static void intel_crtc_check_fastset(const struct intel_crtc_state *old_crtc_sta · line 13707
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +10
-0+ }else { +DRM_DEBUG_KMS ("[CRTC:%d:%s] Used as slave for big joiner\n" , + slave->base.base.id, slave->base.name); + ret =copy_bigjoiner_crtc_state (slave_crtc_state, new_crtc_state); + } + }else { + master = new_crtc_state->bigjoiner_linked_crtc; +if (!master) +continue ; +
What about the case of a CRTC that previously needed the bigjoiner but is performing a modeset such that it no longer does? In that case new_crtc_state->bigjoiner will be false so we'll end up in this branch. But then we seem to be trying to grab the ex-master's master which doesn't make sense for this case since we actually want to grab the slave and clear it out.
The code in this branch seems to be trying to operate on a CRTC that was previously a slave, but assuming an ex-slave is staying disabled (!new_crtc_state->uapi.enable), then I think we took the 'continue' at the top of the loop and never make it down here.
Quoted 55 lines
drivers/gpu/drm/i915/display/intel_display.c +28
-2+ master_crtc_state =intel_atomic_get_crtc_state (&state->base, master); +if (IS_ERR (master_crtc_state)) +return PTR_ERR (master_crtc_state); + +if (!master_crtc_state->uapi.enable && !new_crtc_state->uapi.enable) { +DRM_DEBUG_KMS ("[CRTC:%d:%s] Disabling slave from big joiner\n" , + crtc->base.base.id, crtc->base.name); + ret =clear_intel_crtc_state (new_crtc_state); + } + } +if (ret) +return ret; + } + +return 0 ; +} +/** * intel_atomic_check - validate state object * @dev: drm device @@ -13583,7 +13756,10 @@ static int intel_atomic_check(struct drm_device *dev,if (!new_crtc_state->uapi.enable) { any_ms = true; -clear_intel_crtc_state (new_crtc_state); + +/* big joiner slave is cleared in intel_atomic_check_bigjoiner() */ +if (!new_crtc_state->bigjoiner_slave) +clear_intel_crtc_state (new_crtc_state);continue ; }@@ -13597,6 +13773,10 @@ static int intel_atomic_check(struct drm_device *dev, any_ms = true; } + ret =intel_atomic_check_bigjoiner (state); +if (ret) +return ret; + ret =drm_dp_mst_atomic_check (&state->base);if (ret) goto fail;@@ -13747,7 +13927,9 @@ static void intel_update_crtc(struct intel_crtc *crtc,commit_pipe_config (state, old_crtc_state, new_crtc_state); -if (INTEL_GEN (dev_priv) >=9 ) +if (new_crtc_state->bigjoiner) + {/* Not supported yet */ } +else if (INTEL_GEN (dev_priv) >=9 )skl_update_planes_on_crtc (state, crtc);else i9xx_update_planes_on_crtc (state, crtc);
drivers/gpu/drm/i915/display/intel_display.c static void intel_modeset_readout_hw_state(struct drm_device *dev) · line 17033
Quoted 7 lines
drivers/gpu/drm/i915/display/intel_display.c +0
-1@@ -16846,7 +17028,6 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) }intel_bw_crtc_update (bw_state, crtc_state); -copy_hw_to_uapi_state (crtc_state);intel_pipe_config_sanity_check (dev_priv, crtc_state); }
Strap whitespace change.
Quoted 93 lines
drivers/gpu/drm/i915/display/intel_display_types.h +10
-1@@ -774,7 +774,7 @@ struct intel_crtc_state {struct {bool active, enable;struct drm_property_blob *degamma_lut, *gamma_lut, *ctm; -struct drm_display_mode mode, adjusted_mode; +struct drm_display_mode mode, adjusted_mode, transcoder_mode; } hw;/** @@ -1005,6 +1005,15 @@ struct intel_crtc_state {/* enable pipe csc? */ bool csc_enable; +/* enable pipe big joiner? */ +bool bigjoiner; + +/* big joiner slave crtc? */ +bool bigjoiner_slave; + +/* linked crtc for bigjoiner, either slave or master */ +struct intel_crtc *bigjoiner_linked_crtc; +/* Display Stream compression state */ struct {bool compression_enable;drivers/gpu/drm/i915/display/intel_dp.c +19
-6@@ -2105,6 +2105,19 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp, pipe_config->port_clock = intel_dp->common_rates[limits->max_clock]; pipe_config->lane_count = limits->max_lane_count; +if (adjusted_mode->crtc_clock >intel_dp_downstream_max_dotclock (intel_dp, false)) { +if (adjusted_mode->crtc_clock >intel_dp_downstream_max_dotclock (intel_dp, true)) { +DRM_DEBUG_KMS ("Clock rate too high for big joiner\n" ); +return -EINVAL ; + } +if (intel_dp_is_edp (intel_dp)) { +DRM_DEBUG_KMS ("Cannot split eDP stream in bigjoiner configuration.\n" ); +return -EINVAL ; + } + pipe_config->bigjoiner = true; +DRM_DEBUG_KMS ("Using bigjoiner configuration\n" ); + } +if (intel_dp_is_edp (intel_dp)) { pipe_config->dsc_params.compressed_bpp = min_t(u16, drm_edp_dsc_sink_output_bpp(intel_dp->dsc_dpcd) >> 4,@@ -2122,12 +2135,12 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp, pipe_config->lane_count, adjusted_mode->crtc_clock, adjusted_mode->crtc_hdisplay, - false); + pipe_config->bigjoiner); dsc_dp_slice_count =intel_dp_dsc_get_slice_count (intel_dp, adjusted_mode->crtc_clock, adjusted_mode->crtc_hdisplay, - false); + pipe_config->bigjoiner);if (!dsc_max_output_bpp || !dsc_dp_slice_count) {DRM_DEBUG_KMS ("Compressed BPP/Slice Count not supported\n" );return -EINVAL ;@@ -2142,13 +2155,13 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,* is greater than the maximum Cdclock and if slice count is even * then we need to use 2 VDSC instances. */ -if (adjusted_mode->crtc_clock > dev_priv->max_cdclk_freq) { -if (pipe_config->dsc_params.slice_count >1 ) { - pipe_config->dsc_params.dsc_split = true; - }else { +if (adjusted_mode->crtc_clock > dev_priv->max_cdclk_freq || pipe_config->bigjoiner) { +if (pipe_config->dsc_params.slice_count <2 ) {DRM_DEBUG_KMS ("Cannot split stream to use 2 VDSC instances\n" );return -EINVAL ; } + + pipe_config->dsc_params.dsc_split = true; } ret =intel_dp_compute_dsc_params (intel_dp, pipe_config);Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 9 lines
Matt Roper Graphics Software Engineer VTT-OSGC Platform Enablement Intel Corporation (916) 356-2795 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerRe: [PATCH 11/23] drm/i915: Try to make bigjoiner work in atomic check.
Op 26-09-2019 om 05:48 schreef Matt Roper:
Quoted 99 lines · Maarten Lankhorst
Quoted 98 lines
When the clock is higher than the dotclock, try with 2 pipes enabled. If we can enable 2, then we will go into big joiner mode, and steal the adjacent crtc.
This only links the crtc's in software, no hardware or plane programming is done yet. Blobs are also copied from the master's
crtc_state, so it doesn't depend at commit time on the othercrtc_state.Signed-off-by Maarten Lankhorst <[email protected]>--- drivers/gpu/drm/i915/display/intel_atomic.c | 15 +- drivers/gpu/drm/i915/display/intel_atomic.h | 3 +- drivers/gpu/drm/i915/display/intel_display.c | 197 +++++++++++++++++- .../drm/i915/display/intel_display_types.h | 11 +- drivers/gpu/drm/i915/display/intel_dp.c | 25 ++- 5 files changed, 228 insertions(+), 23 deletions(-)drivers/gpu/drm/i915/display/intel_atomic.c +8
-7@@ -228,25 +228,26 @@ void intel_crtc_free_hw_state(struct intel_crtc_state *crtc_state)intel_crtc_put_color_blobs (crtc_state); } -void intel_crtc_copy_color_blobs (struct intel_crtc_state *crtc_state) +void intel_crtc_copy_color_blobs (struct intel_crtc_state *crtc_state, +const struct intel_crtc_state *from_crtc_state) {intel_crtc_put_color_blobs (crtc_state); -if (crtc_state->uapi.degamma_lut) +if (from_crtc_state->uapi.degamma_lut) crtc_state->hw.degamma_lut = -drm_property_blob_get (crtc_state->uapi.degamma_lut); +drm_property_blob_get (from_crtc_state->uapi.degamma_lut);else crtc_state->hw.degamma_lut =NULL ; -if (crtc_state->uapi.gamma_lut) +if (from_crtc_state->uapi.gamma_lut) crtc_state->hw.gamma_lut = -drm_property_blob_get (crtc_state->uapi.gamma_lut); +drm_property_blob_get (from_crtc_state->uapi.gamma_lut);else crtc_state->hw.gamma_lut =NULL ; -if (crtc_state->uapi.ctm) +if (from_crtc_state->uapi.ctm) crtc_state->hw.ctm = -drm_property_blob_get (crtc_state->uapi.ctm); +drm_property_blob_get (from_crtc_state->uapi.ctm);else crtc_state->hw.ctm =NULL ; }drivers/gpu/drm/i915/display/intel_atomic.h +2
-1@@ -36,7 +36,8 @@ struct drm_crtc_state *intel_crtc_duplicate_state(struct drm_crtc *crtc);void intel_crtc_destroy_state (struct drm_crtc *crtc,struct drm_crtc_state *state);void intel_crtc_free_hw_state (struct intel_crtc_state *crtc_state); -void intel_crtc_copy_color_blobs (struct intel_crtc_state *crtc_state); +void intel_crtc_copy_color_blobs (struct intel_crtc_state *crtc_state, +const struct intel_crtc_state *from_crtc_state);struct drm_atomic_state *intel_atomic_state_alloc (struct drm_device *dev);void intel_atomic_state_clear (struct drm_atomic_state *state);drivers/gpu/drm/i915/display/intel_display.c +12
-1@@ -7434,7 +7434,7 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc, struct intel_crtc_state *pipe_config) {struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev); -const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode; +struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;int clock_limit = dev_priv->max_dotclk_freq;if (INTEL_GEN (dev_priv) <4 ) {@@ -7451,6 +7451,25 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc, } } +/* +* copy hw mode to transcoder mode. +* This matters mostly for big joiner, which splits the mode in half. +*/ + pipe_config->hw.transcoder_mode = pipe_config->hw.adjusted_mode; +if (pipe_config->bigjoiner) { +/* Make sure the crtc config is halved horizontally */ + adjusted_mode->crtc_clock /=2 ; + adjusted_mode->crtc_hdisplay /=2 ; + adjusted_mode->crtc_hblank_start /=2 ; + adjusted_mode->crtc_hblank_end /=2 ;
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_display.c static int intel_crtc_compute_config(struct intel_crtc *crtc, · line 7468
Quoted 4 lines
drivers/gpu/drm/i915/display/intel_display.c +4
-0+ adjusted_mode->crtc_hsync_start /=2 ; + adjusted_mode->crtc_hsync_end /=2 ; + adjusted_mode->crtc_htotal /=2 ; + adjusted_mode->crtc_hskew /=2 ;If
adjusted_modeis the "pipe mode," does anything other than the size have meaning or matter at that level? Not that halving the rest of these hurts anything, it just seems strange to consider them at the pipe level.
Correct.
A few places look at crtc_htotal/vtotal, for example pixel rate calculations, watermarks and pipe scaler.
transcoder gets the full mode covering both pipes, anything else looks at the reduced mode in order to not break anything. :)
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c static void intel_set_pipe_timings(const struct intel_crtc_state *crtc_state)
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_display.c +4
-0+ + pipe_config->pipe_src_w /=2 ; + } +if (adjusted_mode->crtc_clock > clock_limit) { DRM_DEBUG_KMS("requested pixel clock (%d kHz) too high (max: %d kHz, double wide: %s)\n", adjusted_mode->crtc_clock, clock_limit,@@ -8133,7 +8152,7 @@ static void intel_set_pipe_timings(const struct intel_crtc_state *crtc_state)We may want to rename this function to
intel_set_transcoder_timingsnow that pipe and transcoder are starting to be different.
+1, will fix.
Quoted 379 lines
Quoted 113 lines
drivers/gpu/drm/i915/display/intel_display.c +61
-4struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev);enum pipe pipe = crtc->pipe;enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; -const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; +const struct drm_display_mode *adjusted_mode = &crtc_state->hw.transcoder_mode;u32 crtc_vtotal, crtc_vblank_end;int vsyncshift =0 ;@@ -11774,6 +11793,8 @@ static int intel_crtc_atomic_check(struct drm_crtc *_crtc,to_intel_crtc_state (_crtc_state);int ret;bool mode_changed =needs_modeset (crtc_state); +struct intel_atomic_state *state = +to_intel_atomic_state (crtc_state->uapi.state);if (INTEL_GEN (dev_priv) <5 && !IS_G4X (dev_priv) && mode_changed && !crtc_state->hw.active)@@ -11781,6 +11802,7 @@ static int intel_crtc_atomic_check(struct drm_crtc *_crtc,if (mode_changed && crtc_state->hw.enable && dev_priv->display.crtc_compute_clock && + !crtc_state->bigjoiner_slave && !WARN_ON (crtc_state->shared_dpll)) { ret = dev_priv->display.crtc_compute_clock (crtc, crtc_state);if (ret)@@ -11796,8 +11818,15 @@ static int intel_crtc_atomic_check(struct drm_crtc *_crtc,if (mode_changed || crtc_state->update_pipe || crtc_state->uapi.color_mgmt_changed) { +const struct intel_crtc_state *master_crtc_state = crtc_state; + +if (crtc_state->bigjoiner_slave) + master_crtc_state = +intel_atomic_get_new_crtc_state (state, + crtc_state->bigjoiner_linked_crtc); +/* Copy color blobs to hw state */ -intel_crtc_copy_color_blobs (crtc_state); +intel_crtc_copy_color_blobs (crtc_state, master_crtc_state); ret =intel_color_check (crtc_state);if (ret)@@ -12259,7 +12288,48 @@ static void copy_hw_to_uapi_state(struct intel_crtc_state *crtc_state) crtc_state->uapi.enable = crtc_state->hw.enable; crtc_state->uapi.active = crtc_state->hw.active; crtc_state->uapi.mode = crtc_state->hw.mode; - crtc_state->uapi.adjusted_mode = crtc_state->hw.adjusted_mode; + crtc_state->uapi.adjusted_mode = crtc_state->hw.transcoder_mode; +} + +static int +copy_bigjoiner_crtc_state (struct intel_crtc_state *crtc_state, +const struct intel_crtc_state *from_crtc_state) +{ +struct intel_crtc_state *saved_state; +struct intel_crtc *crtc =to_intel_crtc (crtc_state->uapi.crtc); + + saved_state =kmemdup (from_crtc_state,sizeof (*saved_state),GFP_KERNEL ); +if (!saved_state) +return -ENOMEM ; + + saved_state->uapi = crtc_state->uapi; + saved_state->scaler_state = crtc_state->scaler_state; + saved_state->shared_dpll = crtc_state->shared_dpll; + saved_state->dpll_hw_state = crtc_state->dpll_hw_state; + saved_state->crc_enabled = crtc_state->crc_enabled; + +intel_crtc_free_hw_state (crtc_state); +memcpy (crtc_state, saved_state,sizeof (*crtc_state)); +kfree (saved_state); + +/* Re-init hw state */ +memset (&crtc_state->hw,0 ,sizeof (saved_state->hw)); + crtc_state->hw.enable = from_crtc_state->hw.enable; + crtc_state->hw.active = from_crtc_state->hw.active; + crtc_state->hw.mode = from_crtc_state->hw.mode; + crtc_state->hw.adjusted_mode = from_crtc_state->hw.adjusted_mode; + +/* Some fixups */ + crtc_state->uapi.mode_changed = from_crtc_state->uapi.mode_changed; + crtc_state->uapi.connectors_changed = from_crtc_state->uapi.connectors_changed; + crtc_state->uapi.active_changed = from_crtc_state->uapi.active_changed; + crtc_state->nv12_planes = crtc_state->c8_planes = crtc_state->update_planes =0 ; + crtc_state->bigjoiner_linked_crtc =to_intel_crtc (from_crtc_state->uapi.crtc); + crtc_state->bigjoiner_slave = true; + crtc_state->cpu_transcoder = (enum transcoder )crtc->pipe; + crtc_state->has_audio = false; + +return 0 ; } static int@@ -12432,7 +12502,7 @@ intel_modeset_pipe_config(struct intel_crtc_state *pipe_config) base_bpp, pipe_config->pipe_bpp, pipe_config->dither);/* uapi wants a copy of the adjusted_mode for vblank bookkeeping */ - pipe_config->uapi.adjusted_mode = pipe_config->hw.adjusted_mode; + pipe_config->uapi.adjusted_mode = pipe_config->hw.transcoder_mode;return 0 ; }@@ -13549,6 +13619,109 @@ static void intel_crtc_check_fastset(const struct intel_crtc_state *old_crtc_sta new_crtc_state->has_drrs = old_crtc_state->has_drrs; } +static int intel_atomic_check_bigjoiner (struct intel_atomic_state *state) +{ +struct drm_i915_private *dev_priv =to_i915 (state->base.dev); +struct intel_crtc_state *old_crtc_state, *new_crtc_state, *slave_crtc_state, *master_crtc_state; +struct intel_crtc *crtc, *slave, *master; +int i, ret =0 ;drivers/gpu/drm/i915/display/intel_display.c static void intel_crtc_check_fastset(const struct intel_crtc_state *old_crtc_sta · line 13637
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +10
-0+ +if (INTEL_GEN (dev_priv) <11 ) +return 0 ; + +for_each_oldnew_intel_crtc_in_state (state, crtc, old_crtc_state, + new_crtc_state, i) { +if (!old_crtc_state->bigjoiner_slave) +continue ; + +if (crtc->pipe ==PIPE_A ) {Rather than a hardcoded
PIPE_Acheck, should we have a bitmask of pipes that can be big joiner masters somewhere? mask = 0b111 for gen12, but mask = 0b010 for gen11. Then the allowable slaves
would be mask << 1, which would also ensure gen11 doesn't allow a slave on pipe B.drivers/gpu/drm/i915/display/intel_display.c static void intel_crtc_check_fastset(const struct intel_crtc_state *old_crtc_sta · line 13638
Quoted 1 line
drivers/gpu/drm/i915/display/intel_display.c +1
-0+DRM_ERROR ("Bigjoiner slave on pipe A?\n" );We should probably just use a
WARN_ON()in the condition above since this shouldn't happen unless we screwed up somewhere in the driver.drivers/gpu/drm/i915/display/intel_display.c static void intel_crtc_check_fastset(const struct intel_crtc_state *old_crtc_sta · line 13646
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_display.c +8
-0+return -EINVAL ; + } + +/* crtc staying in slave mode? */ +if (!new_crtc_state->uapi.enable) +continue ; + +if (needs_modeset (new_crtc_state) || new_crtc_state->update_pipe) {Won't
needs_modeset()always return true here? I.e., if we were a slave previously but didn't bail on the uapi.enable check above, then uapi.enable is flipping from false to true.Given that enabling the previously-slave CRTC is only possible if the previously-master CRTC is also modesetting in a way that won't need a slave anymore, it seems like the next step would be
master_crtc_state=intel_get_existing_crtc_state()if (!master_crtc_state || !needs_modeset(master_crtc_state))
failotherwise we've now overcommitted our slave CRTC.
Quoted 4 lines
drivers/gpu/drm/i915/display/intel_display.c +4
-0+ master = old_crtc_state->bigjoiner_linked_crtc; + master_crtc_state =intel_atomic_get_crtc_state (&state->base, master); +if (IS_ERR (master_crtc_state)) +return PTR_ERR (master_crtc_state);drivers/gpu/drm/i915/display/intel_display.c static void intel_crtc_check_fastset(const struct intel_crtc_state *old_crtc_sta · line 13660
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +10
-0+ +/* +* Force modeset on master, to recalculate bigjoiner +* state. +* +* If master_crtc_state was not part of the atomic commit, +* we will fail because the master was not deconfigured, +* but at least fail below to unify the checks. +*/ + master_crtc_state->uapi.mode_changed = true;Should we instead update
intel_pipe_config_compareto check bigjoiner fields and prevent fastsets on states currently using the bigjoiner?Quoted 37 lines
drivers/gpu/drm/i915/display/intel_display.c +37
-0+ + ret =drm_atomic_add_affected_planes (&state->base, &crtc->base); +if (ret) +return ret; + + ret =drm_atomic_add_affected_connectors (&state->base, &crtc->base); +if (ret) +return ret; + } + } + +for_each_oldnew_intel_crtc_in_state (state, crtc, old_crtc_state, + new_crtc_state, i) { +if (!new_crtc_state->uapi.enable || !new_crtc_state->bigjoiner) { +if (!old_crtc_state->bigjoiner) +continue ; + } + +if (!needs_modeset (new_crtc_state) && !new_crtc_state->update_pipe) +continue ; + +if (new_crtc_state->bigjoiner && !new_crtc_state->bigjoiner_slave) { +if (1 + crtc->pipe >=INTEL_NUM_PIPES (dev_priv)) { +DRM_DEBUG_KMS ("Big joiner configuration requires CRTC + 1 to be used, doesn't exist\n" ); +return -EINVAL ; + } + + slave = new_crtc_state->bigjoiner_linked_crtc = +intel_get_crtc_for_pipe (dev_priv, crtc->pipe +1 ); + slave_crtc_state =intel_atomic_get_crtc_state (&state->base, slave); +if (IS_ERR (slave_crtc_state)) +return PTR_ERR (slave_crtc_state); + +if (slave_crtc_state->uapi.enable) { +DRM_DEBUG_KMS ("[CRTC:%d:%s] Big joiner configuration requires this CRTC to be unconfigured\n" , + slave->base.base.id, slave->base.name); +return -EINVAL ;drivers/gpu/drm/i915/display/intel_display.c static void intel_crtc_check_fastset(const struct intel_crtc_state *old_crtc_sta · line 13707
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +10
-0+ }else { +DRM_DEBUG_KMS ("[CRTC:%d:%s] Used as slave for big joiner\n" , + slave->base.base.id, slave->base.name); + ret =copy_bigjoiner_crtc_state (slave_crtc_state, new_crtc_state); + } + }else { + master = new_crtc_state->bigjoiner_linked_crtc; +if (!master) +continue ; +What about the case of a CRTC that previously needed the bigjoiner but is performing a modeset such that it no longer does? In that case
new_crtc_state->bigjoinerwill be false so we'll end up in this branch. But then we seem to be trying to grab the ex-master's master which doesn't make sense for this case since we actually want to grab the slave and clear it out.The code in this branch seems to be trying to operate on a CRTC that was previously a slave, but assuming an ex-slave is staying disabled (!new_crtc_state->uapi.enable), then I think we took the 'continue' at the top of the loop and never make it down here.
Quoted 55 lines
drivers/gpu/drm/i915/display/intel_display.c +28
-2+ master_crtc_state =intel_atomic_get_crtc_state (&state->base, master); +if (IS_ERR (master_crtc_state)) +return PTR_ERR (master_crtc_state); + +if (!master_crtc_state->uapi.enable && !new_crtc_state->uapi.enable) { +DRM_DEBUG_KMS ("[CRTC:%d:%s] Disabling slave from big joiner\n" , + crtc->base.base.id, crtc->base.name); + ret =clear_intel_crtc_state (new_crtc_state); + } + } +if (ret) +return ret; + } + +return 0 ; +} +/** * intel_atomic_check - validate state object * @dev: drm device @@ -13583,7 +13756,10 @@ static int intel_atomic_check(struct drm_device *dev,if (!new_crtc_state->uapi.enable) { any_ms = true; -clear_intel_crtc_state (new_crtc_state); + +/* big joiner slave is cleared in intel_atomic_check_bigjoiner() */ +if (!new_crtc_state->bigjoiner_slave) +clear_intel_crtc_state (new_crtc_state);continue ; }@@ -13597,6 +13773,10 @@ static int intel_atomic_check(struct drm_device *dev, any_ms = true; } + ret =intel_atomic_check_bigjoiner (state); +if (ret) +return ret; + ret =drm_dp_mst_atomic_check (&state->base);if (ret) goto fail;@@ -13747,7 +13927,9 @@ static void intel_update_crtc(struct intel_crtc *crtc,commit_pipe_config (state, old_crtc_state, new_crtc_state); -if (INTEL_GEN (dev_priv) >=9 ) +if (new_crtc_state->bigjoiner) + {/* Not supported yet */ } +else if (INTEL_GEN (dev_priv) >=9 )skl_update_planes_on_crtc (state, crtc);else i9xx_update_planes_on_crtc (state, crtc);drivers/gpu/drm/i915/display/intel_display.c static void intel_modeset_readout_hw_state(struct drm_device *dev) · line 17033
Quoted 7 lines
drivers/gpu/drm/i915/display/intel_display.c +0
-1@@ -16846,7 +17028,6 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) }intel_bw_crtc_update (bw_state, crtc_state); -copy_hw_to_uapi_state (crtc_state);intel_pipe_config_sanity_check (dev_priv, crtc_state); }Strap whitespace change.
Quoted 85 lines
drivers/gpu/drm/i915/display/intel_display_types.h +10
-1@@ -774,7 +774,7 @@ struct intel_crtc_state {struct {bool active, enable;struct drm_property_blob *degamma_lut, *gamma_lut, *ctm; -struct drm_display_mode mode, adjusted_mode; +struct drm_display_mode mode, adjusted_mode, transcoder_mode; } hw;/** @@ -1005,6 +1005,15 @@ struct intel_crtc_state {/* enable pipe csc? */ bool csc_enable; +/* enable pipe big joiner? */ +bool bigjoiner; + +/* big joiner slave crtc? */ +bool bigjoiner_slave; + +/* linked crtc for bigjoiner, either slave or master */ +struct intel_crtc *bigjoiner_linked_crtc; +/* Display Stream compression state */ struct {bool compression_enable;drivers/gpu/drm/i915/display/intel_dp.c +19
-6@@ -2105,6 +2105,19 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp, pipe_config->port_clock = intel_dp->common_rates[limits->max_clock]; pipe_config->lane_count = limits->max_lane_count; +if (adjusted_mode->crtc_clock >intel_dp_downstream_max_dotclock (intel_dp, false)) { +if (adjusted_mode->crtc_clock >intel_dp_downstream_max_dotclock (intel_dp, true)) { +DRM_DEBUG_KMS ("Clock rate too high for big joiner\n" ); +return -EINVAL ; + } +if (intel_dp_is_edp (intel_dp)) { +DRM_DEBUG_KMS ("Cannot split eDP stream in bigjoiner configuration.\n" ); +return -EINVAL ; + } + pipe_config->bigjoiner = true; +DRM_DEBUG_KMS ("Using bigjoiner configuration\n" ); + } +if (intel_dp_is_edp (intel_dp)) { pipe_config->dsc_params.compressed_bpp = min_t(u16, drm_edp_dsc_sink_output_bpp(intel_dp->dsc_dpcd) >> 4,@@ -2122,12 +2135,12 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp, pipe_config->lane_count, adjusted_mode->crtc_clock, adjusted_mode->crtc_hdisplay, - false); + pipe_config->bigjoiner); dsc_dp_slice_count =intel_dp_dsc_get_slice_count (intel_dp, adjusted_mode->crtc_clock, adjusted_mode->crtc_hdisplay, - false); + pipe_config->bigjoiner);if (!dsc_max_output_bpp || !dsc_dp_slice_count) {DRM_DEBUG_KMS ("Compressed BPP/Slice Count not supported\n" );return -EINVAL ;@@ -2142,13 +2155,13 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,* is greater than the maximum Cdclock and if slice count is even * then we need to use 2 VDSC instances. */ -if (adjusted_mode->crtc_clock > dev_priv->max_cdclk_freq) { -if (pipe_config->dsc_params.slice_count >1 ) { - pipe_config->dsc_params.dsc_split = true; - }else { +if (adjusted_mode->crtc_clock > dev_priv->max_cdclk_freq || pipe_config->bigjoiner) { +if (pipe_config->dsc_params.slice_count <2 ) {DRM_DEBUG_KMS ("Cannot split stream to use 2 VDSC instances\n" );return -EINVAL ; } + + pipe_config->dsc_params.dsc_split = true; }
Quoted 8 lines
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_dp.c +0
-0ret =intel_dp_compute_dsc_params (intel_dp, pipe_config);Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerPATCH 12/23 drm/i915: Enable big joiner support in enable and disable sequences.
In reply to Maarten LankhorstMake vdsc work when no output is enabled. The big joiner needs VDSC on the slave, so enable it and set the appropriate bits. Also update timestamping constants, because slave crtc's are not updated in drm_atomic_helper_update_legacy_modeset_state().
This should be enough to bring up CRTC's in a big joiner configuration, without any plane configuration on the second pipe yet.
HOWEVER, we bring up the crtc's in the wrong order. We need to make sure that the master crtc is brought up after the slave crtc, we don't do that yet. This is done correctly later in this series.
The next steps are to add atomic commit, and make sure we enable and update both master and slave in the correct order.
--- drivers/gpu/drm/i915/display/intel_ddi.c | 55 ++- drivers/gpu/drm/i915/display/intel_display.c | 402 ++++++++++++------ .../drm/i915/display/intel_display_types.h | 17 + drivers/gpu/drm/i915/display/intel_dp.c | 18 +- drivers/gpu/drm/i915/display/intel_vdsc.c | 122 ++++-- drivers/gpu/drm/i915/display/intel_vdsc.h | 2 + 6 files changed, 418 insertions(+), 198 deletions(-)
drivers/gpu/drm/i915/display/intel_ddi.c +40 -15
@@ -1694,6 +1694,13 @@ static void intel_ddi_clock_get(struct intel_encoder *encoder,skl_ddi_clock_get (encoder, pipe_config); else if (INTEL_GEN(dev_priv) <= 8) hsw_ddi_clock_get(encoder, pipe_config); + +if (pipe_config->bigjoiner) { + pipe_config->hw.transcoder_mode.crtc_clock = + pipe_config->hw.adjusted_mode.crtc_clock; + + pipe_config->hw.adjusted_mode.crtc_clock /=2 ; + } }void intel_ddi_set_pipe_settings (const struct intel_crtc_state *crtc_state)
@@ -2176,13 +2183,6 @@ static void intel_ddi_get_power_domains(struct intel_encoder *encoder, intel_phy_is_tc(dev_priv, phy))intel_display_power_get (dev_priv,intel_ddi_main_link_aux_domain (dig_port)); - -/* -* VDSC power is needed when DSC is enabled -*/ -if (crtc_state->dsc_params.compression_enable) -intel_display_power_get (dev_priv, -intel_dsc_power_domain (crtc_state)); }void intel_ddi_enable_pipe_clock (const struct intel_crtc_state *crtc_state)
@@ -3290,7 +3290,8 @@ static void tgl_ddi_pre_enable_dp(struct intel_encoder *encoder,/* 7.l */ intel_ddi_enable_fec (encoder, crtc_state); -intel_dsc_enable (encoder, crtc_state); +if (!crtc_state->bigjoiner) +intel_dsc_enable (encoder, crtc_state); } static void hsw_ddi_pre_enable_dp(struct intel_encoder *encoder,
@@ -3361,7 +3362,8 @@ static void hsw_ddi_pre_enable_dp(struct intel_encoder *encoder,if (!is_mst)intel_ddi_enable_pipe_clock (crtc_state); -intel_dsc_enable (encoder, crtc_state); +if (!crtc_state->bigjoiner) +intel_dsc_enable (encoder, crtc_state); } static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
@@ -3972,19 +3974,18 @@ void intel_ddi_compute_min_voltage_level(struct drm_i915_private *dev_priv, crtc_state->min_voltage_level =2 ; } -void intel_ddi_get_config (struct intel_encoder *encoder, -struct intel_crtc_state *pipe_config) +static void intel_ddi_read_func_ctl (struct intel_encoder *encoder, +struct intel_crtc_state *pipe_config) {struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev);struct intel_crtc *intel_crtc =to_intel_crtc (pipe_config->uapi.crtc);enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;u32 temp, flags =0 ; -/* XXX: DSI transcoder paranoia */ -if (WARN_ON (transcoder_is_dsi (cpu_transcoder))) + temp =I915_READ (TRANS_DDI_FUNC_CTL (cpu_transcoder)); +if (!(temp &TRANS_DDI_FUNC_ENABLE ))return ; - temp =I915_READ (TRANS_DDI_FUNC_CTL (cpu_transcoder));if (temp &TRANS_DDI_PHSYNC ) flags |=DRM_MODE_FLAG_PHSYNC ;else
@@ -4066,6 +4067,29 @@ void intel_ddi_get_config(struct intel_encoder *encoder,default :break ; } +} + +void intel_ddi_get_config (struct intel_encoder *encoder, +struct intel_crtc_state *pipe_config) +{ +struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); +enum transcoder cpu_transcoder = pipe_config->cpu_transcoder; + +/* XXX: DSI transcoder paranoia */ +if (WARN_ON (transcoder_is_dsi (cpu_transcoder))) +return ; + +intel_ddi_read_func_ctl (encoder, pipe_config); +if (pipe_config->bigjoiner_slave) { +/* read out pipe settings from master */ +enum transcoder save = pipe_config->cpu_transcoder; + +/* Our own transcoder needs to be disabled when reading it in intel_ddi_read_func_ctl() */ +WARN_ON (pipe_config->output_types); + pipe_config->cpu_transcoder = (enum transcoder )pipe_config->bigjoiner_linked_crtc->pipe; +intel_ddi_read_func_ctl (encoder, pipe_config); + pipe_config->cpu_transcoder = save; + } pipe_config->has_audio =intel_ddi_is_audio_enabled (dev_priv, cpu_transcoder);
@@ -4090,7 +4114,8 @@ void intel_ddi_get_config(struct intel_encoder *encoder, dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp; } -intel_ddi_clock_get (encoder, pipe_config); +if (!pipe_config->bigjoiner_slave) +intel_ddi_clock_get (encoder, pipe_config);if (IS_GEN9_LP (dev_priv)) pipe_config->lane_lat_optim_mask =
drivers/gpu/drm/i915/display/intel_display.c +281 -121
596 lines not on this page · raw message
drivers/gpu/drm/i915/display/intel_display_types.h +17 -0
@@ -786,6 +786,7 @@ struct intel_crtc_state {* accordingly. */ #define PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS (1<<0)/* unreliable sync mode.flags */ +#define PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE (1<<1)/* bigjoiner slave, partial readout */ unsigned long quirks;unsigned fb_bits;/* framebuffers to flip */
@@ -1572,4 +1573,20 @@ static inline u32 intel_plane_ggtt_offset(const struct intel_plane_state *state) return i915_ggtt_offset(state->vma); } +static inline bool +intel_crtc_supports_dsc (const struct intel_crtc_state *pipe_config) +{ +struct drm_i915_private *dev_priv =to_i915 (pipe_config->uapi.crtc->dev); + +/* On TGL, DSC is supported on all Pipes */ +if (INTEL_GEN (dev_priv) >=12 ) +return true; + +if (INTEL_GEN (dev_priv) >=10 && + pipe_config->cpu_transcoder !=TRANSCODER_A ) +return true; + +return false; +} +#endif /* __INTEL_DISPLAY_TYPES_H__ */
drivers/gpu/drm/i915/display/intel_dp.c +1 -17
@@ -1907,22 +1907,6 @@ static bool intel_dp_supports_fec(struct intel_dp *intel_dp,drm_dp_sink_supports_fec (intel_dp->fec_capable); } -static bool intel_dp_source_supports_dsc (struct intel_dp *intel_dp, -const struct intel_crtc_state *pipe_config) -{ -struct drm_i915_private *dev_priv =dp_to_i915 (intel_dp); - -/* On TGL, DSC is supported on all Pipes */ -if (INTEL_GEN (dev_priv) >=12 ) -return true; - -if (INTEL_GEN (dev_priv) >=10 && - pipe_config->cpu_transcoder !=TRANSCODER_A ) -return true; - -return false; -} -static bool intel_dp_supports_dsc (struct intel_dp *intel_dp,const struct intel_crtc_state *pipe_config) {
@@ -1930,7 +1914,7 @@ static bool intel_dp_supports_dsc(struct intel_dp *intel_dp,if (!intel_dp_is_edp (intel_dp) && !pipe_config->fec_enable &&0 )return false; -return intel_dp_source_supports_dsc (intel_dp, pipe_config) && +return intel_crtc_supports_dsc (pipe_config) &&drm_dp_sink_supports_dsc (intel_dp->dsc_dpcd); }
drivers/gpu/drm/i915/display/intel_vdsc.c +77 -45
168 lines not on this page · raw message
drivers/gpu/drm/i915/display/intel_vdsc.h +2 -0
@@ -15,6 +15,8 @@ void intel_dsc_enable(struct intel_encoder *encoder,void intel_dsc_disable (const struct intel_crtc_state *crtc_state);int intel_dp_compute_dsc_params (struct intel_dp *intel_dp,struct intel_crtc_state *pipe_config); +void intel_dsc_get_config (struct intel_crtc_state *crtc_state); +enum intel_display_power_domain intel_dsc_power_domain (const struct intel_crtc_state *crtc_state);
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 12/23] drm/i915: Enable big joiner support in enable and disable sequences.
Quoted 8 lines · Maarten Lankhorst
Make vdsc work when no output is enabled. The big joiner needs VDSC on the slave, so enable it and set the appropriate bits. Also update timestamping constants, because slave crtc's are not updated in
drm_atomic_helper_update_legacy_modeset_state().This should be enough to bring up CRTC's in a big joiner configuration, without any plane configuration on the second pipe yet.
Quoted 8 lines
HOWEVER, we bring up the crtc's in the wrong order. We need to make sure that the master crtc is brought up after the slave crtc, we don't do that yet. This is done correctly later in this series.
The next steps are to add atomic commit, and make sure we enable and update both master and slave in the correct order.
Signed-off-by Maarten Lankhorst <[email protected]>
A couple minor comments inline below, but I didn't see any clear problems with this patch so
However there's a lot of pretty complicated changes here in areas that I'm only vaguely familiar with, so I think it would be good if someone like Manasi who's more familiar with this area of the code could look it over.
Matt
Quoted 153 lines
--- drivers/gpu/drm/i915/display/intel_ddi.c | 55 ++- drivers/gpu/drm/i915/display/intel_display.c | 402 ++++++++++++------ .../drm/i915/display/intel_display_types.h | 17 + drivers/gpu/drm/i915/display/intel_dp.c | 18 +- drivers/gpu/drm/i915/display/intel_vdsc.c | 122 ++++-- drivers/gpu/drm/i915/display/intel_vdsc.h | 2 + 6 files changed, 418 insertions(+), 198 deletions(-)drivers/gpu/drm/i915/display/intel_ddi.c +40
-15@@ -1694,6 +1694,13 @@ static void intel_ddi_clock_get(struct intel_encoder *encoder,skl_ddi_clock_get (encoder, pipe_config); else if (INTEL_GEN(dev_priv) <= 8) hsw_ddi_clock_get(encoder, pipe_config); + +if (pipe_config->bigjoiner) { + pipe_config->hw.transcoder_mode.crtc_clock = + pipe_config->hw.adjusted_mode.crtc_clock; + + pipe_config->hw.adjusted_mode.crtc_clock /=2 ; + } }void intel_ddi_set_pipe_settings (const struct intel_crtc_state *crtc_state)@@ -2176,13 +2183,6 @@ static void intel_ddi_get_power_domains(struct intel_encoder *encoder, intel_phy_is_tc(dev_priv, phy))intel_display_power_get (dev_priv,intel_ddi_main_link_aux_domain (dig_port)); - -/* -* VDSC power is needed when DSC is enabled -*/ -if (crtc_state->dsc_params.compression_enable) -intel_display_power_get (dev_priv, -intel_dsc_power_domain (crtc_state)); }void intel_ddi_enable_pipe_clock (const struct intel_crtc_state *crtc_state)@@ -3290,7 +3290,8 @@ static void tgl_ddi_pre_enable_dp(struct intel_encoder *encoder,/* 7.l */ intel_ddi_enable_fec (encoder, crtc_state); -intel_dsc_enable (encoder, crtc_state); +if (!crtc_state->bigjoiner) +intel_dsc_enable (encoder, crtc_state); } static void hsw_ddi_pre_enable_dp(struct intel_encoder *encoder,@@ -3361,7 +3362,8 @@ static void hsw_ddi_pre_enable_dp(struct intel_encoder *encoder,if (!is_mst)intel_ddi_enable_pipe_clock (crtc_state); -intel_dsc_enable (encoder, crtc_state); +if (!crtc_state->bigjoiner) +intel_dsc_enable (encoder, crtc_state); } static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,@@ -3972,19 +3974,18 @@ void intel_ddi_compute_min_voltage_level(struct drm_i915_private *dev_priv, crtc_state->min_voltage_level =2 ; } -void intel_ddi_get_config (struct intel_encoder *encoder, -struct intel_crtc_state *pipe_config) +static void intel_ddi_read_func_ctl (struct intel_encoder *encoder, +struct intel_crtc_state *pipe_config) {struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev);struct intel_crtc *intel_crtc =to_intel_crtc (pipe_config->uapi.crtc);enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;u32 temp, flags =0 ; -/* XXX: DSI transcoder paranoia */ -if (WARN_ON (transcoder_is_dsi (cpu_transcoder))) + temp =I915_READ (TRANS_DDI_FUNC_CTL (cpu_transcoder)); +if (!(temp &TRANS_DDI_FUNC_ENABLE ))return ; - temp =I915_READ (TRANS_DDI_FUNC_CTL (cpu_transcoder));if (temp &TRANS_DDI_PHSYNC ) flags |=DRM_MODE_FLAG_PHSYNC ;else @@ -4066,6 +4067,29 @@ void intel_ddi_get_config(struct intel_encoder *encoder,default :break ; } +} + +void intel_ddi_get_config (struct intel_encoder *encoder, +struct intel_crtc_state *pipe_config) +{ +struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); +enum transcoder cpu_transcoder = pipe_config->cpu_transcoder; + +/* XXX: DSI transcoder paranoia */ +if (WARN_ON (transcoder_is_dsi (cpu_transcoder))) +return ; + +intel_ddi_read_func_ctl (encoder, pipe_config); +if (pipe_config->bigjoiner_slave) { +/* read out pipe settings from master */ +enum transcoder save = pipe_config->cpu_transcoder; + +/* Our own transcoder needs to be disabled when reading it in intel_ddi_read_func_ctl() */ +WARN_ON (pipe_config->output_types); + pipe_config->cpu_transcoder = (enum transcoder )pipe_config->bigjoiner_linked_crtc->pipe; +intel_ddi_read_func_ctl (encoder, pipe_config); + pipe_config->cpu_transcoder = save; + } pipe_config->has_audio =intel_ddi_is_audio_enabled (dev_priv, cpu_transcoder);@@ -4090,7 +4114,8 @@ void intel_ddi_get_config(struct intel_encoder *encoder, dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp; } -intel_ddi_clock_get (encoder, pipe_config); +if (!pipe_config->bigjoiner_slave) +intel_ddi_clock_get (encoder, pipe_config);if (IS_GEN9_LP (dev_priv)) pipe_config->lane_lat_optim_mask =drivers/gpu/drm/i915/display/intel_display.c +20
-0@@ -6449,6 +6449,45 @@ static void icl_pipe_mbus_enable(struct intel_crtc *crtc)I915_WRITE (PIPE_MBUS_DBOX_CTL (pipe), val); } +static void icl_ddi_bigjoiner_pre_enable (struct intel_atomic_state *state, +struct intel_crtc_state *crtc_state) +{ +struct intel_crtc *master =to_intel_crtc (crtc_state->uapi.crtc); +struct intel_crtc_state *master_crtc_state; +struct drm_connector_state *conn_state; +struct drm_connector *conn; +struct intel_encoder *encoder =NULL ; +int i; + +if (crtc_state->bigjoiner_slave) + master = crtc_state->bigjoiner_linked_crtc; + + master_crtc_state =intel_atomic_get_new_crtc_state (state, master); + +for_each_new_connector_in_state (&state->base, conn, conn_state, i) { +if (conn_state->crtc != &master->base) +continue ; + + encoder =to_intel_encoder (conn_state->best_encoder);
drivers/gpu/drm/i915/display/intel_display.c static void icl_pipe_mbus_enable(struct intel_crtc *crtc) · line 6481
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +10
-0+break ; + } + +if (!crtc_state->bigjoiner_slave) { +/* need to enable VDSC, which we skipped in pre-enable */ +intel_dsc_enable (encoder, crtc_state); + }else { +/* +* Enable sequence steps 1-7 on bigjoiner master +*/
I'd extend this comment to indicate that we do this on the slave (using the master's state, transcoder, and DDI) because the [will] program the slave CRTC before the master.
Quoted 386 lines
drivers/gpu/drm/i915/display/intel_display.c +168
-74+intel_encoders_pre_pll_enable (master, master_crtc_state, state); +intel_enable_shared_dpll (master_crtc_state); +intel_encoders_pre_enable (master, master_crtc_state, state); + +/* and DSC on slave */ +intel_dsc_enable (NULL , crtc_state); + } +} +static void haswell_crtc_enable (struct intel_crtc_state *pipe_config,struct intel_atomic_state *state) {@@ -6462,37 +6501,38 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,if (WARN_ON (intel_crtc->active))return ; -intel_encoders_pre_pll_enable (intel_crtc, pipe_config, state); +if (!pipe_config->bigjoiner) { +intel_encoders_pre_pll_enable (intel_crtc, pipe_config, state); -if (pipe_config->shared_dpll) -intel_enable_shared_dpll (pipe_config); +if (pipe_config->shared_dpll) +intel_enable_shared_dpll (pipe_config); -intel_encoders_pre_enable (intel_crtc, pipe_config, state); +intel_encoders_pre_enable (intel_crtc, pipe_config, state); + }else { +icl_ddi_bigjoiner_pre_enable (state, pipe_config); + } -if (intel_crtc_has_dp_encoder (pipe_config)) -intel_dp_set_m_n (pipe_config,M1_N1 ); +intel_set_pipe_src_size (pipe_config); +if (INTEL_GEN (dev_priv) >=9 ||IS_BROADWELL (dev_priv)) +bdw_set_pipemisc (pipe_config); -if (!transcoder_is_dsi (cpu_transcoder)) -intel_set_pipe_timings (pipe_config); +if (!pipe_config->bigjoiner_slave && !transcoder_is_dsi (cpu_transcoder)) { +if (intel_crtc_has_dp_encoder (pipe_config)) +intel_dp_set_m_n (pipe_config,M1_N1 ); -intel_set_pipe_src_size (pipe_config); +intel_set_pipe_timings (pipe_config); -if (cpu_transcoder !=TRANSCODER_EDP && - !transcoder_is_dsi (cpu_transcoder)) { -I915_WRITE (PIPE_MULT (cpu_transcoder), - pipe_config->pixel_multiplier -1 ); - } +if (cpu_transcoder !=TRANSCODER_EDP ) +I915_WRITE (PIPE_MULT (cpu_transcoder), + pipe_config->pixel_multiplier -1 ); -if (pipe_config->has_pch_encoder) { -intel_cpu_transcoder_set_m_n (pipe_config, - &pipe_config->fdi_m_n,NULL ); - } +if (pipe_config->has_pch_encoder) { +intel_cpu_transcoder_set_m_n (pipe_config, + &pipe_config->fdi_m_n,NULL ); + } -if (!transcoder_is_dsi (cpu_transcoder))haswell_set_pipeconf (pipe_config); - -if (INTEL_GEN (dev_priv) >=9 ||IS_BROADWELL (dev_priv)) -bdw_set_pipemisc (pipe_config); + } intel_crtc->active = true;@@ -6520,9 +6560,11 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,if (INTEL_GEN (dev_priv) >=11 )icl_set_pipe_chicken (intel_crtc); -intel_ddi_set_pipe_settings (pipe_config); -if (!transcoder_is_dsi (cpu_transcoder)) +if (!pipe_config->bigjoiner_slave && !transcoder_is_dsi (cpu_transcoder)) { +intel_ddi_set_pipe_settings (pipe_config); +intel_ddi_enable_transcoder_func (pipe_config); + }if (dev_priv->display.initial_watermarks !=NULL ) dev_priv->display.initial_watermarks (state, pipe_config);@@ -6531,8 +6573,10 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,icl_pipe_mbus_enable (intel_crtc);/* XXX: Do the pipe assertions at the right place for BXT DSI. */ -if (!transcoder_is_dsi (cpu_transcoder)) +if (!pipe_config->bigjoiner_slave && !transcoder_is_dsi (cpu_transcoder))intel_enable_pipe (pipe_config); +else +trace_intel_pipe_enable (intel_crtc);if (pipe_config->has_pch_encoder)lpt_pch_enable (state, pipe_config);@@ -6663,9 +6707,27 @@ static void haswell_crtc_disable(struct intel_crtc_state *old_crtc_state,else ironlake_pfit_disable (old_crtc_state); -intel_encoders_post_disable (intel_crtc, old_crtc_state, state); +if (old_crtc_state->bigjoiner) { +struct intel_crtc *master; +struct intel_crtc_state *master_crtc_state; -intel_encoders_post_pll_disable (intel_crtc, old_crtc_state, state); +/* ports are disabled from the slave, after it deconfigures */ +if (!old_crtc_state->bigjoiner_slave) +return ; + + master = old_crtc_state->bigjoiner_linked_crtc; + master_crtc_state =intel_atomic_get_old_crtc_state (state, master); + +intel_ddi_disable_pipe_clock (old_crtc_state); + +/* disable ports on the master crtc */ +intel_encoders_post_disable (master, master_crtc_state, state); +intel_encoders_post_pll_disable (master, master_crtc_state, state); + }else { +intel_encoders_post_disable (intel_crtc, old_crtc_state, state); + +intel_encoders_post_pll_disable (intel_crtc, old_crtc_state, state); + } }static void i9xx_pfit_enable (const struct intel_crtc_state *crtc_state)@@ -6829,6 +6891,9 @@ static u64 get_crtc_power_domains(struct intel_crtc_state *crtc_state)if (crtc_state->shared_dpll) mask |=BIT_ULL (POWER_DOMAIN_DISPLAY_CORE ); +if (crtc_state->dsc_params.compression_enable) + mask |=BIT_ULL (intel_dsc_power_domain (crtc_state)); +return mask; }@@ -7417,6 +7482,19 @@ static u32 ilk_pipe_pixel_rate(const struct intel_crtc_state *pipe_config)return pixel_rate; } +static void intel_encoder_get_config (struct intel_encoder *encoder, +struct intel_crtc_state *crtc_state) +{ + encoder->get_config (encoder, crtc_state); + + crtc_state->hw.transcoder_mode.flags = crtc_state->hw.adjusted_mode.flags; + +/* if transcoder clock is not set, assume same as adjusted_mode clock */ +if (!crtc_state->hw.transcoder_mode.crtc_clock) + crtc_state->hw.transcoder_mode.crtc_clock = + crtc_state->hw.adjusted_mode.crtc_clock; +} +static void intel_crtc_compute_pixel_rate (struct intel_crtc_state *crtc_state) {struct drm_i915_private *dev_priv =to_i915 (crtc_state->uapi.crtc->dev);@@ -8265,6 +8343,24 @@ static void intel_get_pipe_timings(struct intel_crtc *crtc, pipe_config->hw.adjusted_mode.crtc_vtotal +=1 ; pipe_config->hw.adjusted_mode.crtc_vblank_end +=1 ; } + + pipe_config->hw.transcoder_mode = pipe_config->hw.adjusted_mode; +if (pipe_config->bigjoiner) { +struct drm_display_mode *adjusted_mode = + &pipe_config->hw.adjusted_mode; + +/* +* transcoder is programmed to the full mode, +* but pipje timings are half of the transcoder mode +*/ + adjusted_mode->crtc_hdisplay /=2 ; + adjusted_mode->crtc_hblank_start /=2 ; + adjusted_mode->crtc_hblank_end /=2 ; + adjusted_mode->crtc_hsync_start /=2 ; + adjusted_mode->crtc_hsync_end /=2 ; + adjusted_mode->crtc_htotal /=2 ; + adjusted_mode->crtc_hskew /=2 ; + } } static void intel_get_pipe_src_size(struct intel_crtc *crtc,@@ -8285,20 +8381,22 @@ static void intel_get_pipe_src_size(struct intel_crtc *crtc,void intel_mode_from_pipe_config (struct drm_display_mode *mode,struct intel_crtc_state *pipe_config) { - mode->hdisplay = pipe_config->hw.adjusted_mode.crtc_hdisplay; - mode->htotal = pipe_config->hw.adjusted_mode.crtc_htotal; - mode->hsync_start = pipe_config->hw.adjusted_mode.crtc_hsync_start; - mode->hsync_end = pipe_config->hw.adjusted_mode.crtc_hsync_end; +struct drm_display_mode *hw_mode = &pipe_config->hw.transcoder_mode; - mode->vdisplay = pipe_config->hw.adjusted_mode.crtc_vdisplay; - mode->vtotal = pipe_config->hw.adjusted_mode.crtc_vtotal; - mode->vsync_start = pipe_config->hw.adjusted_mode.crtc_vsync_start; - mode->vsync_end = pipe_config->hw.adjusted_mode.crtc_vsync_end; + mode->hdisplay = hw_mode->crtc_hdisplay; + mode->htotal = hw_mode->crtc_htotal; + mode->hsync_start = hw_mode->crtc_hsync_start; + mode->hsync_end = hw_mode->crtc_hsync_end; - mode->flags = pipe_config->hw.adjusted_mode.flags; + mode->vdisplay = hw_mode->crtc_vdisplay; + mode->vtotal = hw_mode->crtc_vtotal; + mode->vsync_start = hw_mode->crtc_vsync_start; + mode->vsync_end = hw_mode->crtc_vsync_end; + + mode->flags = hw_mode->flags; mode->type =DRM_MODE_TYPE_DRIVER ; - mode->clock = pipe_config->hw.adjusted_mode.crtc_clock; + mode->clock = hw_mode->crtc_clock; mode->hsync =drm_mode_hsync (mode); mode->vrefresh =drm_mode_vrefresh (mode);@@ -10385,6 +10483,8 @@ static void haswell_get_ddi_port_state(struct intel_crtc *crtc,u32 tmp; tmp =I915_READ (TRANS_DDI_FUNC_CTL (pipe_config->cpu_transcoder)); +if (!(tmp &TRANS_DDI_FUNC_ENABLE )) +return ;if (INTEL_GEN (dev_priv) >=12 ) port =TGL_TRANS_DDI_FUNC_CTL_VAL_TO_PORT (tmp);@@ -10455,11 +10555,19 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,WARN_ON (active); active = true; } +intel_dsc_get_config (pipe_config); -if (!active) - goto out; +if (!active) { +/* bigjoiner slave doesn't enable transcoder */ +if (!pipe_config->bigjoiner_slave) + goto out; + + active = true; + pipe_config->pixel_multiplier =1 ; -if (!transcoder_is_dsi (pipe_config->cpu_transcoder) || +/* we cannot read out most state, so don't bother.. */ + pipe_config->quirks |=PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE ; + }else if (!transcoder_is_dsi (pipe_config->cpu_transcoder) ||INTEL_GEN (dev_priv) >=11 ) {haswell_get_ddi_port_state (crtc, pipe_config);intel_get_pipe_timings (crtc, pipe_config);@@ -10513,7 +10621,10 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc, } } -if (pipe_config->cpu_transcoder !=TRANSCODER_EDP && +if (pipe_config->bigjoiner_slave) { +/* Cannot be read out as a slave, set to 0. */ + pipe_config->pixel_multiplier =0 ; + }else if (pipe_config->cpu_transcoder !=TRANSCODER_EDP && !transcoder_is_dsi (pipe_config->cpu_transcoder)) { pipe_config->pixel_multiplier =I915_READ (PIPE_MULT (pipe_config->cpu_transcoder)) +1 ;@@ -11468,7 +11579,7 @@ intel_encoder_current_mode(struct intel_encoder *encoder)return NULL ; } - encoder->get_config (encoder, crtc_state); +intel_encoder_get_config (encoder, crtc_state);intel_mode_from_pipe_config (mode, crtc_state);@@ -12285,9 +12396,11 @@ static void copy_uapi_to_hw_state(struct intel_crtc_state *crtc_state)static void copy_hw_to_uapi_state (struct intel_crtc_state *crtc_state) { - crtc_state->uapi.enable = crtc_state->hw.enable; - crtc_state->uapi.active = crtc_state->hw.active; - crtc_state->uapi.mode = crtc_state->hw.mode; +if (!crtc_state->bigjoiner_slave) { + crtc_state->uapi.enable = crtc_state->hw.enable; + crtc_state->uapi.active = crtc_state->hw.active; + crtc_state->uapi.mode = crtc_state->hw.mode; + } crtc_state->uapi.adjusted_mode = crtc_state->hw.transcoder_mode; }@@ -12318,6 +12431,7 @@ copy_bigjoiner_crtc_state(struct intel_crtc_state *crtc_state, crtc_state->hw.active = from_crtc_state->hw.active; crtc_state->hw.mode = from_crtc_state->hw.mode; crtc_state->hw.adjusted_mode = from_crtc_state->hw.adjusted_mode; + crtc_state->hw.transcoder_mode = from_crtc_state->hw.transcoder_mode;/* Some fixups */ crtc_state->uapi.mode_changed = from_crtc_state->uapi.mode_changed;@@ -12833,19 +12947,41 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,PIPE_CONF_CHECK_X (output_types); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_hdisplay); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_htotal); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_hblank_start); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_hblank_end); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_hsync_start); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_hsync_end); - -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vdisplay); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vtotal); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vblank_start); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vblank_end); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vsync_start); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vsync_end); +if (!PIPE_CONF_QUIRK (PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE )) { +/* bigjoiner mode = transcoder mode / 2, for calculations */ +PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_hdisplay); +PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_htotal); +PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vdisplay); +PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vtotal); + +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_hdisplay); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_htotal); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_hblank_start); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_hblank_end); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_hsync_start); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_hsync_end); + +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_vdisplay); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_vtotal); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_vblank_start); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_vblank_end); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_vsync_start); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_vsync_end); + +PIPE_CONF_CHECK_FLAGS (hw.transcoder_mode.flags, +DRM_MODE_FLAG_INTERLACE ); + +if (!PIPE_CONF_QUIRK (PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS )) { +PIPE_CONF_CHECK_FLAGS (hw.transcoder_mode.flags, +DRM_MODE_FLAG_PHSYNC ); +PIPE_CONF_CHECK_FLAGS (hw.transcoder_mode.flags, +DRM_MODE_FLAG_NHSYNC ); +PIPE_CONF_CHECK_FLAGS (hw.transcoder_mode.flags, +DRM_MODE_FLAG_PVSYNC ); +PIPE_CONF_CHECK_FLAGS (hw.transcoder_mode.flags, +DRM_MODE_FLAG_NVSYNC ); + } + }PIPE_CONF_CHECK_I (pixel_multiplier);PIPE_CONF_CHECK_I (output_format);@@ -12857,24 +12993,11 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,PIPE_CONF_CHECK_BOOL (hdmi_scrambling);PIPE_CONF_CHECK_BOOL (hdmi_high_tmds_clock_ratio);PIPE_CONF_CHECK_BOOL (has_infoframe); -PIPE_CONF_CHECK_BOOL (fec_enable); +if (!PIPE_CONF_QUIRK (PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE )) +PIPE_CONF_CHECK_BOOL (fec_enable);PIPE_CONF_CHECK_BOOL_INCOMPLETE (has_audio); -PIPE_CONF_CHECK_FLAGS (hw.adjusted_mode.flags, -DRM_MODE_FLAG_INTERLACE ); - -if (!PIPE_CONF_QUIRK (PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS )) { -PIPE_CONF_CHECK_FLAGS (hw.adjusted_mode.flags, -DRM_MODE_FLAG_PHSYNC ); -PIPE_CONF_CHECK_FLAGS (hw.adjusted_mode.flags, -DRM_MODE_FLAG_NHSYNC ); -PIPE_CONF_CHECK_FLAGS (hw.adjusted_mode.flags, -DRM_MODE_FLAG_PVSYNC ); -PIPE_CONF_CHECK_FLAGS (hw.adjusted_mode.flags, -DRM_MODE_FLAG_NVSYNC ); - } -PIPE_CONF_CHECK_X (gmch_pfit.control);/* pfit ratios are autocomputed by the hw on gen4+ */ if (INTEL_GEN (dev_priv) <4 )@@ -12898,7 +13021,8 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config, }PIPE_CONF_CHECK_I (scaler_state.scaler_id); -PIPE_CONF_CHECK_CLOCK_FUZZY (pixel_rate); +if (!PIPE_CONF_QUIRK (PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE )) +PIPE_CONF_CHECK_CLOCK_FUZZY (pixel_rate);PIPE_CONF_CHECK_X (gamma_mode);if (IS_CHERRYVIEW (dev_priv))
drivers/gpu/drm/i915/display/intel_display.c intel_pipe_config_compare(const struct intel_crtc_state *current_config, · line 13045
Quoted 5 lines
drivers/gpu/drm/i915/display/intel_display.c +1
-0@@ -12917,48 +13041,50 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,PIPE_CONF_CHECK_BOOL (double_wide);PIPE_CONF_CHECK_P (shared_dpll); +if (!PIPE_CONF_QUIRK (PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE )) {PIPE_CONF_CHECK_X (dpll_hw_state.dpll);
Missing indent on this line?
Quoted 463 lines
drivers/gpu/drm/i915/display/intel_display.c +82
-47-PIPE_CONF_CHECK_X (dpll_hw_state.dpll_md); -PIPE_CONF_CHECK_X (dpll_hw_state.fp0); -PIPE_CONF_CHECK_X (dpll_hw_state.fp1); -PIPE_CONF_CHECK_X (dpll_hw_state.wrpll); -PIPE_CONF_CHECK_X (dpll_hw_state.spll); -PIPE_CONF_CHECK_X (dpll_hw_state.ctrl1); -PIPE_CONF_CHECK_X (dpll_hw_state.cfgcr1); -PIPE_CONF_CHECK_X (dpll_hw_state.cfgcr2); -PIPE_CONF_CHECK_X (dpll_hw_state.cfgcr0); -PIPE_CONF_CHECK_X (dpll_hw_state.ebb0); -PIPE_CONF_CHECK_X (dpll_hw_state.ebb4); -PIPE_CONF_CHECK_X (dpll_hw_state.pll0); -PIPE_CONF_CHECK_X (dpll_hw_state.pll1); -PIPE_CONF_CHECK_X (dpll_hw_state.pll2); -PIPE_CONF_CHECK_X (dpll_hw_state.pll3); -PIPE_CONF_CHECK_X (dpll_hw_state.pll6); -PIPE_CONF_CHECK_X (dpll_hw_state.pll8); -PIPE_CONF_CHECK_X (dpll_hw_state.pll9); -PIPE_CONF_CHECK_X (dpll_hw_state.pll10); -PIPE_CONF_CHECK_X (dpll_hw_state.pcsdw12); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_refclkin_ctl); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_clktop2_coreclkctl1); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_clktop2_hsclkctl); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_div0); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_div1); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_lf); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_frac_lock); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_ssc); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_bias); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_tdc_coldst_bias); - -PIPE_CONF_CHECK_X (dsi_pll.ctrl); -PIPE_CONF_CHECK_X (dsi_pll.div); - -if (IS_G4X (dev_priv) ||INTEL_GEN (dev_priv) >=5 ) -PIPE_CONF_CHECK_I (pipe_bpp); - -PIPE_CONF_CHECK_CLOCK_FUZZY (hw.adjusted_mode.crtc_clock); -PIPE_CONF_CHECK_CLOCK_FUZZY (port_clock); - -PIPE_CONF_CHECK_I (min_voltage_level); +PIPE_CONF_CHECK_X (dpll_hw_state.dpll_md); +PIPE_CONF_CHECK_X (dpll_hw_state.fp0); +PIPE_CONF_CHECK_X (dpll_hw_state.fp1); +PIPE_CONF_CHECK_X (dpll_hw_state.wrpll); +PIPE_CONF_CHECK_X (dpll_hw_state.spll); +PIPE_CONF_CHECK_X (dpll_hw_state.ctrl1); +PIPE_CONF_CHECK_X (dpll_hw_state.cfgcr1); +PIPE_CONF_CHECK_X (dpll_hw_state.cfgcr2); +PIPE_CONF_CHECK_X (dpll_hw_state.cfgcr0); +PIPE_CONF_CHECK_X (dpll_hw_state.ebb0); +PIPE_CONF_CHECK_X (dpll_hw_state.ebb4); +PIPE_CONF_CHECK_X (dpll_hw_state.pll0); +PIPE_CONF_CHECK_X (dpll_hw_state.pll1); +PIPE_CONF_CHECK_X (dpll_hw_state.pll2); +PIPE_CONF_CHECK_X (dpll_hw_state.pll3); +PIPE_CONF_CHECK_X (dpll_hw_state.pll6); +PIPE_CONF_CHECK_X (dpll_hw_state.pll8); +PIPE_CONF_CHECK_X (dpll_hw_state.pll9); +PIPE_CONF_CHECK_X (dpll_hw_state.pll10); +PIPE_CONF_CHECK_X (dpll_hw_state.pcsdw12); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_refclkin_ctl); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_clktop2_coreclkctl1); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_clktop2_hsclkctl); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_div0); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_div1); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_lf); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_frac_lock); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_ssc); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_bias); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_tdc_coldst_bias); + +PIPE_CONF_CHECK_X (dsi_pll.ctrl); +PIPE_CONF_CHECK_X (dsi_pll.div); + +if (IS_G4X (dev_priv) ||INTEL_GEN (dev_priv) >=5 ) +PIPE_CONF_CHECK_I (pipe_bpp); + +PIPE_CONF_CHECK_CLOCK_FUZZY (hw.adjusted_mode.crtc_clock); +PIPE_CONF_CHECK_CLOCK_FUZZY (port_clock); + +PIPE_CONF_CHECK_I (min_voltage_level); + }PIPE_CONF_CHECK_X (infoframes.enable);PIPE_CONF_CHECK_X (infoframes.gcp);@@ -12967,6 +13093,12 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,PIPE_CONF_CHECK_INFOFRAME (hdmi);PIPE_CONF_CHECK_INFOFRAME (drm); +PIPE_CONF_CHECK_BOOL (bigjoiner); +PIPE_CONF_CHECK_BOOL (bigjoiner_slave); +PIPE_CONF_CHECK_P (bigjoiner_linked_crtc); +PIPE_CONF_CHECK_BOOL (dsc_params.compression_enable); +PIPE_CONF_CHECK_BOOL (dsc_params.dsc_split); +#undef PIPE_CONF_CHECK_X#undef PIPE_CONF_CHECK_I#undef PIPE_CONF_CHECK_BOOL@@ -13221,6 +13353,7 @@ verify_crtc_state(struct intel_crtc *crtc,struct intel_encoder *encoder;struct intel_crtc_state *pipe_config;struct drm_atomic_state *state; +struct intel_crtc *master = crtc;bool active; state = old_crtc_state->uapi.state;@@ -13250,7 +13383,10 @@ verify_crtc_state(struct intel_crtc *crtc,"(expected %i, found %i)\n" , new_crtc_state->hw.active, crtc->active); -for_each_encoder_on_crtc (dev, &crtc->base, encoder) { +if (new_crtc_state->bigjoiner_slave) + master = new_crtc_state->bigjoiner_linked_crtc; + +for_each_encoder_on_crtc (dev, &master->base, encoder) {enum pipe pipe; active = encoder->get_hw_state (encoder, &pipe);@@ -13259,12 +13395,12 @@ verify_crtc_state(struct intel_crtc *crtc, encoder->base.base.id, active, new_crtc_state->hw.active); -I915_STATE_WARN (active && crtc->pipe != pipe, +I915_STATE_WARN (active && master->pipe != pipe,"Encoder connected to wrong pipe %c\n" ,pipe_name (pipe));if (active) - encoder->get_config (encoder, pipe_config); +intel_encoder_get_config (encoder, pipe_config); }intel_crtc_compute_pixel_rate (pipe_config);@@ -13906,6 +14042,7 @@ static void intel_update_crtc(struct intel_crtc *crtc,if (modeset) {update_scanline_offset (new_crtc_state); +drm_calc_timestamping_constants (&crtc->base, &new_crtc_state->hw.transcoder_mode); dev_priv->display.crtc_enable (new_crtc_state, state);/* vblanks work again, re-enable pipe CRC. */ @@ -13990,7 +14127,7 @@ static void intel_commit_modeset_disables(struct intel_atomic_state *state)*/ for_each_oldnew_intel_crtc_in_state_reverse (state, crtc, old_crtc_state, new_crtc_state, i) { -if (!needs_modeset (new_crtc_state)) +if (!needs_modeset (new_crtc_state) || old_crtc_state->bigjoiner_slave)continue ;intel_pre_plane_update (old_crtc_state, new_crtc_state);@@ -14000,6 +14137,19 @@ static void intel_commit_modeset_disables(struct intel_atomic_state *state) old_crtc_state, new_crtc_state, crtc); + +if (old_crtc_state->bigjoiner) { +struct intel_crtc *slave = old_crtc_state->bigjoiner_linked_crtc; +struct intel_crtc_state *old_slave_crtc_state = +intel_atomic_get_crtc_state (&state->base, slave); +struct intel_crtc_state *new_slave_crtc_state = +intel_atomic_get_crtc_state (&state->base, slave); + +intel_old_crtc_state_disables (state, + old_slave_crtc_state, + new_slave_crtc_state, + slave); + } } }@@ -16433,7 +16583,7 @@ int intel_modeset_init(struct drm_device *dev)for_each_intel_crtc (dev, crtc) {struct intel_initial_plane_config plane_config = {}; -if (!crtc->active) +if (!to_intel_crtc_state (crtc->base.state)->uapi.active)continue ;/* @@ -16923,7 +17073,17 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) crtc_state =to_intel_crtc_state (crtc->base.state); encoder->base.crtc = &crtc->base; - encoder->get_config (encoder, crtc_state); +intel_encoder_get_config (encoder, crtc_state); + +/* read out to slave crtc as well for bigjoiner */ +if (crtc_state->bigjoiner) { +/* encoder should read be linked to bigjoiner master */ +WARN_ON (crtc_state->bigjoiner_slave); + + crtc = crtc_state->bigjoiner_linked_crtc; + crtc_state =to_intel_crtc_state (crtc->base.state); +intel_encoder_get_config (encoder, crtc_state); + } }else { encoder->base.crtc =NULL ; }drivers/gpu/drm/i915/display/intel_display_types.h +17
-0@@ -786,6 +786,7 @@ struct intel_crtc_state {* accordingly. */ #define PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS (1<<0)/* unreliable sync mode.flags */ +#define PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE (1<<1)/* bigjoiner slave, partial readout */ unsigned long quirks;unsigned fb_bits;/* framebuffers to flip */ @@ -1572,4 +1573,20 @@ static inline u32 intel_plane_ggtt_offset(const struct intel_plane_state *state) return i915_ggtt_offset(state->vma); } +static inline bool +intel_crtc_supports_dsc (const struct intel_crtc_state *pipe_config) +{ +struct drm_i915_private *dev_priv =to_i915 (pipe_config->uapi.crtc->dev); + +/* On TGL, DSC is supported on all Pipes */ +if (INTEL_GEN (dev_priv) >=12 ) +return true; + +if (INTEL_GEN (dev_priv) >=10 && + pipe_config->cpu_transcoder !=TRANSCODER_A ) +return true; + +return false; +} +#endif /* __INTEL_DISPLAY_TYPES_H__ */ drivers/gpu/drm/i915/display/intel_dp.c +1
-17@@ -1907,22 +1907,6 @@ static bool intel_dp_supports_fec(struct intel_dp *intel_dp,drm_dp_sink_supports_fec (intel_dp->fec_capable); } -static bool intel_dp_source_supports_dsc (struct intel_dp *intel_dp, -const struct intel_crtc_state *pipe_config) -{ -struct drm_i915_private *dev_priv =dp_to_i915 (intel_dp); - -/* On TGL, DSC is supported on all Pipes */ -if (INTEL_GEN (dev_priv) >=12 ) -return true; - -if (INTEL_GEN (dev_priv) >=10 && - pipe_config->cpu_transcoder !=TRANSCODER_A ) -return true; - -return false; -} -static bool intel_dp_supports_dsc (struct intel_dp *intel_dp,const struct intel_crtc_state *pipe_config) {@@ -1930,7 +1914,7 @@ static bool intel_dp_supports_dsc(struct intel_dp *intel_dp,if (!intel_dp_is_edp (intel_dp) && !pipe_config->fec_enable &&0 )return false; -return intel_dp_source_supports_dsc (intel_dp, pipe_config) && +return intel_crtc_supports_dsc (pipe_config) &&drm_dp_sink_supports_dsc (intel_dp->dsc_dpcd); }drivers/gpu/drm/i915/display/intel_vdsc.c +77
-45@@ -480,11 +480,10 @@ intel_dsc_power_domain(const struct intel_crtc_state *crtc_state)return POWER_DOMAIN_TRANSCODER (cpu_transcoder); } -static void intel_configure_pps_for_dsc_encoder (struct intel_encoder *encoder, -const struct intel_crtc_state *crtc_state) +static void intel_configure_pps_for_dsc_encoder (const struct intel_crtc_state *crtc_state) {struct intel_crtc *crtc =to_intel_crtc (crtc_state->uapi.crtc); -struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); +struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev);const struct drm_dsc_config *vdsc_cfg = &crtc_state->dp_dsc_cfg;enum pipe pipe = crtc->pipe;enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;@@ -494,6 +493,9 @@ static void intel_configure_pps_for_dsc_encoder(struct intel_encoder *encoder,u8 num_vdsc_instances = (crtc_state->dsc_params.dsc_split) ?2 :1 ;int i =0 ; +if (crtc_state->bigjoiner) + num_vdsc_instances *=2 ; +/* Populate PICTURE_PARAMETER_SET_0 registers */ pps_val =DSC_VER_MAJ | vdsc_cfg->dsc_version_minor << DSC_VER_MIN_SHIFT |@@ -899,74 +901,104 @@ static void intel_dp_write_dsc_pps_sdp(struct intel_encoder *encoder, sizeof(dp_dsc_pps_sdp)); } +static i915_reg_t dss_ctl1_reg (const struct intel_crtc_state *crtc_state) +{ +enum pipe pipe =to_intel_crtc (crtc_state->uapi.crtc)->pipe; + +if (crtc_state->cpu_transcoder ==TRANSCODER_EDP ) +return DSS_CTL1 ; + +return ICL_PIPE_DSS_CTL1 (pipe); +} + +static i915_reg_t dss_ctl2_reg (const struct intel_crtc_state *crtc_state) +{ +enum pipe pipe =to_intel_crtc (crtc_state->uapi.crtc)->pipe; + +if (crtc_state->cpu_transcoder ==TRANSCODER_EDP ) +return DSS_CTL2 ; + +return ICL_PIPE_DSS_CTL2 (pipe); +} +void intel_dsc_enable (struct intel_encoder *encoder,const struct intel_crtc_state *crtc_state) {struct intel_crtc *crtc =to_intel_crtc (crtc_state->uapi.crtc); -struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); -enum pipe pipe = crtc->pipe; -i915_reg_t dss_ctl1_reg, dss_ctl2_reg; +struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev);u32 dss_ctl1_val =0 ;u32 dss_ctl2_val =0 ;if (!crtc_state->dsc_params.compression_enable)return ; -/* Enable Power wells for VDSC/joining */ -intel_display_power_get (dev_priv, -intel_dsc_power_domain (crtc_state)); +intel_configure_pps_for_dsc_encoder (crtc_state); -intel_configure_pps_for_dsc_encoder (encoder, crtc_state); +if (!crtc_state->bigjoiner_slave) +intel_dp_write_dsc_pps_sdp (encoder, crtc_state); -intel_dp_write_dsc_pps_sdp (encoder, crtc_state); - -if (crtc_state->cpu_transcoder ==TRANSCODER_EDP ) { - dss_ctl1_reg =DSS_CTL1 ; - dss_ctl2_reg =DSS_CTL2 ; - }else { - dss_ctl1_reg =ICL_PIPE_DSS_CTL1 (pipe); - dss_ctl2_reg =ICL_PIPE_DSS_CTL2 (pipe); - } dss_ctl2_val |=LEFT_BRANCH_VDSC_ENABLE ;if (crtc_state->dsc_params.dsc_split) { dss_ctl2_val |=RIGHT_BRANCH_VDSC_ENABLE ; dss_ctl1_val |=JOINER_ENABLE ; } -I915_WRITE (dss_ctl1_reg, dss_ctl1_val); -I915_WRITE (dss_ctl2_reg, dss_ctl2_val); +if (crtc_state->bigjoiner) { + dss_ctl1_val |=BIG_JOINER_ENABLE ; +if (!crtc_state->bigjoiner_slave) + dss_ctl1_val |=MASTER_BIG_JOINER_ENABLE ; + } +I915_WRITE (dss_ctl1_reg (crtc_state), dss_ctl1_val); +I915_WRITE (dss_ctl2_reg (crtc_state), dss_ctl2_val); }void intel_dsc_disable (const struct intel_crtc_state *old_crtc_state) {struct intel_crtc *crtc =to_intel_crtc (old_crtc_state->uapi.crtc);struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev); -enum pipe pipe = crtc->pipe; -i915_reg_t dss_ctl1_reg, dss_ctl2_reg; -u32 dss_ctl1_val =0 , dss_ctl2_val =0 ;if (!old_crtc_state->dsc_params.compression_enable)return ; -if (old_crtc_state->cpu_transcoder ==TRANSCODER_EDP ) { - dss_ctl1_reg =DSS_CTL1 ; - dss_ctl2_reg =DSS_CTL2 ; - }else { - dss_ctl1_reg =ICL_PIPE_DSS_CTL1 (pipe); - dss_ctl2_reg =ICL_PIPE_DSS_CTL2 (pipe); +I915_WRITE (dss_ctl1_reg (old_crtc_state),0 ); +I915_WRITE (dss_ctl2_reg (old_crtc_state),0 ); +} + +void intel_dsc_get_config (struct intel_crtc_state *crtc_state) +{ +struct intel_crtc *crtc =to_intel_crtc (crtc_state->uapi.crtc); +struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev); +u32 dss_ctl1_val, dss_ctl2_val; +intel_wakeref_t wakeref; + +if (!intel_crtc_supports_dsc (crtc_state)) +return ; + + wakeref =intel_display_power_get_if_enabled (dev_priv,intel_dsc_power_domain (crtc_state)); +if (!wakeref) +return ; + + dss_ctl1_val =I915_READ (dss_ctl1_reg (crtc_state)); + dss_ctl2_val =I915_READ (dss_ctl2_reg (crtc_state)); +if (dss_ctl2_val &LEFT_BRANCH_VDSC_ENABLE ) + crtc_state->dsc_params.compression_enable = true; + +if ((dss_ctl1_val &JOINER_ENABLE ) && (dss_ctl2_val &RIGHT_BRANCH_VDSC_ENABLE )) + crtc_state->dsc_params.dsc_split = true; + +if (dss_ctl1_val &BIG_JOINER_ENABLE ) { + crtc_state->bigjoiner = true; + +if (!(dss_ctl1_val &MASTER_BIG_JOINER_ENABLE )) { + crtc_state->bigjoiner_slave = true; +if (!WARN_ON (crtc->pipe ==PIPE_A )) + crtc_state->bigjoiner_linked_crtc = +intel_get_crtc_for_pipe (dev_priv, crtc->pipe -1 ); + }else { +if (!WARN_ON (INTEL_NUM_PIPES (dev_priv) == crtc->pipe +1 )) + crtc_state->bigjoiner_linked_crtc = +intel_get_crtc_for_pipe (dev_priv, crtc->pipe +1 ); + } } - dss_ctl1_val =I915_READ (dss_ctl1_reg); -if (dss_ctl1_val &JOINER_ENABLE ) - dss_ctl1_val &= ~JOINER_ENABLE ; -I915_WRITE (dss_ctl1_reg, dss_ctl1_val); - - dss_ctl2_val =I915_READ (dss_ctl2_reg); -if (dss_ctl2_val &LEFT_BRANCH_VDSC_ENABLE || - dss_ctl2_val &RIGHT_BRANCH_VDSC_ENABLE ) - dss_ctl2_val &= ~(LEFT_BRANCH_VDSC_ENABLE | -RIGHT_BRANCH_VDSC_ENABLE ); -I915_WRITE (dss_ctl2_reg, dss_ctl2_val); - -/* Disable Power wells for VDSC/joining */ -intel_display_power_put_unchecked (dev_priv, -intel_dsc_power_domain (old_crtc_state)); + +intel_display_power_put (dev_priv,intel_dsc_power_domain (crtc_state), wakeref); }drivers/gpu/drm/i915/display/intel_vdsc.h +2
-0@@ -15,6 +15,8 @@ void intel_dsc_enable(struct intel_encoder *encoder,void intel_dsc_disable (const struct intel_crtc_state *crtc_state);int intel_dp_compute_dsc_params (struct intel_dp *intel_dp,struct intel_crtc_state *pipe_config); +void intel_dsc_get_config (struct intel_crtc_state *crtc_state); +enum intel_display_power_domain intel_dsc_power_domain (const struct intel_crtc_state *crtc_state);Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 9 lines
Matt Roper Graphics Software Engineer VTT-OSGC Platform Enablement Intel Corporation (916) 356-2795 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 12/23] drm/i915: Enable big joiner support in enable and disable sequences.
Quoted 999 lines · Matt Roper
Quoted 8 lines · Maarten Lankhorst
Make vdsc work when no output is enabled. The big joiner needs VDSC on the slave, so enable it and set the appropriate bits. Also update timestamping constants, because slave crtc's are not updated in
drm_atomic_helper_update_legacy_modeset_state().This should be enough to bring up CRTC's in a big joiner configuration, without any plane configuration on the second pipe yet.
Quoted 8 lines
HOWEVER, we bring up the crtc's in the wrong order. We need to make sure that the master crtc is brought up after the slave crtc, we don't do that yet. This is done correctly later in this series.
The next steps are to add atomic commit, and make sure we enable and update both master and slave in the correct order.
Signed-off-by Maarten Lankhorst <[email protected]>A couple minor comments inline below, but I didn't see any clear problems with this patch so
Acked-by Matt Roper <[email protected]>However there's a lot of pretty complicated changes here in areas that I'm only vaguely familiar with, so I think it would be good if someone like Manasi who's more familiar with this area of the code could look it over.
Matt
Quoted 153 lines
--- drivers/gpu/drm/i915/display/intel_ddi.c | 55 ++- drivers/gpu/drm/i915/display/intel_display.c | 402 ++++++++++++------ .../drm/i915/display/intel_display_types.h | 17 + drivers/gpu/drm/i915/display/intel_dp.c | 18 +- drivers/gpu/drm/i915/display/intel_vdsc.c | 122 ++++-- drivers/gpu/drm/i915/display/intel_vdsc.h | 2 + 6 files changed, 418 insertions(+), 198 deletions(-)drivers/gpu/drm/i915/display/intel_ddi.c +40
-15@@ -1694,6 +1694,13 @@ static void intel_ddi_clock_get(struct intel_encoder *encoder,skl_ddi_clock_get (encoder, pipe_config); else if (INTEL_GEN(dev_priv) <= 8) hsw_ddi_clock_get(encoder, pipe_config); + +if (pipe_config->bigjoiner) { + pipe_config->hw.transcoder_mode.crtc_clock = + pipe_config->hw.adjusted_mode.crtc_clock; + + pipe_config->hw.adjusted_mode.crtc_clock /=2 ; + } }void intel_ddi_set_pipe_settings (const struct intel_crtc_state *crtc_state)@@ -2176,13 +2183,6 @@ static void intel_ddi_get_power_domains(struct intel_encoder *encoder, intel_phy_is_tc(dev_priv, phy))intel_display_power_get (dev_priv,intel_ddi_main_link_aux_domain (dig_port)); - -/* -* VDSC power is needed when DSC is enabled -*/ -if (crtc_state->dsc_params.compression_enable) -intel_display_power_get (dev_priv, -intel_dsc_power_domain (crtc_state)); }void intel_ddi_enable_pipe_clock (const struct intel_crtc_state *crtc_state)@@ -3290,7 +3290,8 @@ static void tgl_ddi_pre_enable_dp(struct intel_encoder *encoder,/* 7.l */ intel_ddi_enable_fec (encoder, crtc_state); -intel_dsc_enable (encoder, crtc_state); +if (!crtc_state->bigjoiner) +intel_dsc_enable (encoder, crtc_state); } static void hsw_ddi_pre_enable_dp(struct intel_encoder *encoder,@@ -3361,7 +3362,8 @@ static void hsw_ddi_pre_enable_dp(struct intel_encoder *encoder,if (!is_mst)intel_ddi_enable_pipe_clock (crtc_state); -intel_dsc_enable (encoder, crtc_state); +if (!crtc_state->bigjoiner) +intel_dsc_enable (encoder, crtc_state); } static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,@@ -3972,19 +3974,18 @@ void intel_ddi_compute_min_voltage_level(struct drm_i915_private *dev_priv, crtc_state->min_voltage_level =2 ; } -void intel_ddi_get_config (struct intel_encoder *encoder, -struct intel_crtc_state *pipe_config) +static void intel_ddi_read_func_ctl (struct intel_encoder *encoder, +struct intel_crtc_state *pipe_config) {struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev);struct intel_crtc *intel_crtc =to_intel_crtc (pipe_config->uapi.crtc);enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;u32 temp, flags =0 ; -/* XXX: DSI transcoder paranoia */ -if (WARN_ON (transcoder_is_dsi (cpu_transcoder))) + temp =I915_READ (TRANS_DDI_FUNC_CTL (cpu_transcoder)); +if (!(temp &TRANS_DDI_FUNC_ENABLE ))return ; - temp =I915_READ (TRANS_DDI_FUNC_CTL (cpu_transcoder));if (temp &TRANS_DDI_PHSYNC ) flags |=DRM_MODE_FLAG_PHSYNC ;else @@ -4066,6 +4067,29 @@ void intel_ddi_get_config(struct intel_encoder *encoder,default :break ; } +} + +void intel_ddi_get_config (struct intel_encoder *encoder, +struct intel_crtc_state *pipe_config) +{ +struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); +enum transcoder cpu_transcoder = pipe_config->cpu_transcoder; + +/* XXX: DSI transcoder paranoia */ +if (WARN_ON (transcoder_is_dsi (cpu_transcoder))) +return ; + +intel_ddi_read_func_ctl (encoder, pipe_config); +if (pipe_config->bigjoiner_slave) { +/* read out pipe settings from master */ +enum transcoder save = pipe_config->cpu_transcoder; + +/* Our own transcoder needs to be disabled when reading it in intel_ddi_read_func_ctl() */ +WARN_ON (pipe_config->output_types); + pipe_config->cpu_transcoder = (enum transcoder )pipe_config->bigjoiner_linked_crtc->pipe; +intel_ddi_read_func_ctl (encoder, pipe_config); + pipe_config->cpu_transcoder = save; + } pipe_config->has_audio =intel_ddi_is_audio_enabled (dev_priv, cpu_transcoder);@@ -4090,7 +4114,8 @@ void intel_ddi_get_config(struct intel_encoder *encoder, dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp; } -intel_ddi_clock_get (encoder, pipe_config); +if (!pipe_config->bigjoiner_slave) +intel_ddi_clock_get (encoder, pipe_config);if (IS_GEN9_LP (dev_priv)) pipe_config->lane_lat_optim_mask =drivers/gpu/drm/i915/display/intel_display.c +20
-0@@ -6449,6 +6449,45 @@ static void icl_pipe_mbus_enable(struct intel_crtc *crtc)I915_WRITE (PIPE_MBUS_DBOX_CTL (pipe), val); } +static void icl_ddi_bigjoiner_pre_enable (struct intel_atomic_state *state, +struct intel_crtc_state *crtc_state) +{ +struct intel_crtc *master =to_intel_crtc (crtc_state->uapi.crtc); +struct intel_crtc_state *master_crtc_state; +struct drm_connector_state *conn_state; +struct drm_connector *conn; +struct intel_encoder *encoder =NULL ; +int i; + +if (crtc_state->bigjoiner_slave) + master = crtc_state->bigjoiner_linked_crtc; + + master_crtc_state =intel_atomic_get_new_crtc_state (state, master); + +for_each_new_connector_in_state (&state->base, conn, conn_state, i) { +if (conn_state->crtc != &master->base) +continue ; + + encoder =to_intel_encoder (conn_state->best_encoder);drivers/gpu/drm/i915/display/intel_display.c static void icl_pipe_mbus_enable(struct intel_crtc *crtc) · line 6481
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +10
-0+break ; + } + +if (!crtc_state->bigjoiner_slave) { +/* need to enable VDSC, which we skipped in pre-enable */ +intel_dsc_enable (encoder, crtc_state); + }else { +/* +* Enable sequence steps 1-7 on bigjoiner master +*/ I'd extend this comment to indicate that we do this on the slave (using the master's state, transcoder, and DDI) because the [will] program the slave CRTC before the master.
Quoted 386 lines
drivers/gpu/drm/i915/display/intel_display.c +168
-74+intel_encoders_pre_pll_enable (master, master_crtc_state, state); +intel_enable_shared_dpll (master_crtc_state); +intel_encoders_pre_enable (master, master_crtc_state, state); + +/* and DSC on slave */ +intel_dsc_enable (NULL , crtc_state); + } +} +static void haswell_crtc_enable (struct intel_crtc_state *pipe_config,struct intel_atomic_state *state) {@@ -6462,37 +6501,38 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,if (WARN_ON (intel_crtc->active))return ; -intel_encoders_pre_pll_enable (intel_crtc, pipe_config, state); +if (!pipe_config->bigjoiner) { +intel_encoders_pre_pll_enable (intel_crtc, pipe_config, state); -if (pipe_config->shared_dpll) -intel_enable_shared_dpll (pipe_config); +if (pipe_config->shared_dpll) +intel_enable_shared_dpll (pipe_config); -intel_encoders_pre_enable (intel_crtc, pipe_config, state); +intel_encoders_pre_enable (intel_crtc, pipe_config, state); + }else { +icl_ddi_bigjoiner_pre_enable (state, pipe_config); + } -if (intel_crtc_has_dp_encoder (pipe_config)) -intel_dp_set_m_n (pipe_config,M1_N1 ); +intel_set_pipe_src_size (pipe_config); +if (INTEL_GEN (dev_priv) >=9 ||IS_BROADWELL (dev_priv)) +bdw_set_pipemisc (pipe_config); -if (!transcoder_is_dsi (cpu_transcoder)) -intel_set_pipe_timings (pipe_config); +if (!pipe_config->bigjoiner_slave && !transcoder_is_dsi (cpu_transcoder)) { +if (intel_crtc_has_dp_encoder (pipe_config)) +intel_dp_set_m_n (pipe_config,M1_N1 ); -intel_set_pipe_src_size (pipe_config); +intel_set_pipe_timings (pipe_config); -if (cpu_transcoder !=TRANSCODER_EDP && - !transcoder_is_dsi (cpu_transcoder)) { -I915_WRITE (PIPE_MULT (cpu_transcoder), - pipe_config->pixel_multiplier -1 ); - } +if (cpu_transcoder !=TRANSCODER_EDP ) +I915_WRITE (PIPE_MULT (cpu_transcoder), + pipe_config->pixel_multiplier -1 ); -if (pipe_config->has_pch_encoder) { -intel_cpu_transcoder_set_m_n (pipe_config, - &pipe_config->fdi_m_n,NULL ); - } +if (pipe_config->has_pch_encoder) { +intel_cpu_transcoder_set_m_n (pipe_config, + &pipe_config->fdi_m_n,NULL ); + } -if (!transcoder_is_dsi (cpu_transcoder))haswell_set_pipeconf (pipe_config); - -if (INTEL_GEN (dev_priv) >=9 ||IS_BROADWELL (dev_priv)) -bdw_set_pipemisc (pipe_config); + } intel_crtc->active = true;@@ -6520,9 +6560,11 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,if (INTEL_GEN (dev_priv) >=11 )icl_set_pipe_chicken (intel_crtc); -intel_ddi_set_pipe_settings (pipe_config); -if (!transcoder_is_dsi (cpu_transcoder)) +if (!pipe_config->bigjoiner_slave && !transcoder_is_dsi (cpu_transcoder)) { +intel_ddi_set_pipe_settings (pipe_config); +intel_ddi_enable_transcoder_func (pipe_config); + }if (dev_priv->display.initial_watermarks !=NULL ) dev_priv->display.initial_watermarks (state, pipe_config);@@ -6531,8 +6573,10 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,icl_pipe_mbus_enable (intel_crtc);/* XXX: Do the pipe assertions at the right place for BXT DSI. */ -if (!transcoder_is_dsi (cpu_transcoder)) +if (!pipe_config->bigjoiner_slave && !transcoder_is_dsi (cpu_transcoder))intel_enable_pipe (pipe_config); +else +trace_intel_pipe_enable (intel_crtc);if (pipe_config->has_pch_encoder)lpt_pch_enable (state, pipe_config);@@ -6663,9 +6707,27 @@ static void haswell_crtc_disable(struct intel_crtc_state *old_crtc_state,else ironlake_pfit_disable (old_crtc_state); -intel_encoders_post_disable (intel_crtc, old_crtc_state, state); +if (old_crtc_state->bigjoiner) { +struct intel_crtc *master; +struct intel_crtc_state *master_crtc_state; -intel_encoders_post_pll_disable (intel_crtc, old_crtc_state, state); +/* ports are disabled from the slave, after it deconfigures */ +if (!old_crtc_state->bigjoiner_slave) +return ; + + master = old_crtc_state->bigjoiner_linked_crtc; + master_crtc_state =intel_atomic_get_old_crtc_state (state, master); + +intel_ddi_disable_pipe_clock (old_crtc_state); + +/* disable ports on the master crtc */ +intel_encoders_post_disable (master, master_crtc_state, state); +intel_encoders_post_pll_disable (master, master_crtc_state, state); + }else { +intel_encoders_post_disable (intel_crtc, old_crtc_state, state); + +intel_encoders_post_pll_disable (intel_crtc, old_crtc_state, state); + } }static void i9xx_pfit_enable (const struct intel_crtc_state *crtc_state)@@ -6829,6 +6891,9 @@ static u64 get_crtc_power_domains(struct intel_crtc_state *crtc_state)if (crtc_state->shared_dpll) mask |=BIT_ULL (POWER_DOMAIN_DISPLAY_CORE ); +if (crtc_state->dsc_params.compression_enable) + mask |=BIT_ULL (intel_dsc_power_domain (crtc_state)); +return mask; }@@ -7417,6 +7482,19 @@ static u32 ilk_pipe_pixel_rate(const struct intel_crtc_state *pipe_config)return pixel_rate; } +static void intel_encoder_get_config (struct intel_encoder *encoder, +struct intel_crtc_state *crtc_state) +{ + encoder->get_config (encoder, crtc_state); + + crtc_state->hw.transcoder_mode.flags = crtc_state->hw.adjusted_mode.flags; + +/* if transcoder clock is not set, assume same as adjusted_mode clock */ +if (!crtc_state->hw.transcoder_mode.crtc_clock) + crtc_state->hw.transcoder_mode.crtc_clock = + crtc_state->hw.adjusted_mode.crtc_clock; +} +static void intel_crtc_compute_pixel_rate (struct intel_crtc_state *crtc_state) {struct drm_i915_private *dev_priv =to_i915 (crtc_state->uapi.crtc->dev);@@ -8265,6 +8343,24 @@ static void intel_get_pipe_timings(struct intel_crtc *crtc, pipe_config->hw.adjusted_mode.crtc_vtotal +=1 ; pipe_config->hw.adjusted_mode.crtc_vblank_end +=1 ; } + + pipe_config->hw.transcoder_mode = pipe_config->hw.adjusted_mode; +if (pipe_config->bigjoiner) { +struct drm_display_mode *adjusted_mode = + &pipe_config->hw.adjusted_mode; + +/* +* transcoder is programmed to the full mode, +* but pipje timings are half of the transcoder mode +*/ + adjusted_mode->crtc_hdisplay /=2 ; + adjusted_mode->crtc_hblank_start /=2 ; + adjusted_mode->crtc_hblank_end /=2 ; + adjusted_mode->crtc_hsync_start /=2 ; + adjusted_mode->crtc_hsync_end /=2 ; + adjusted_mode->crtc_htotal /=2 ; + adjusted_mode->crtc_hskew /=2 ; + } } static void intel_get_pipe_src_size(struct intel_crtc *crtc,@@ -8285,20 +8381,22 @@ static void intel_get_pipe_src_size(struct intel_crtc *crtc,void intel_mode_from_pipe_config (struct drm_display_mode *mode,struct intel_crtc_state *pipe_config) { - mode->hdisplay = pipe_config->hw.adjusted_mode.crtc_hdisplay; - mode->htotal = pipe_config->hw.adjusted_mode.crtc_htotal; - mode->hsync_start = pipe_config->hw.adjusted_mode.crtc_hsync_start; - mode->hsync_end = pipe_config->hw.adjusted_mode.crtc_hsync_end; +struct drm_display_mode *hw_mode = &pipe_config->hw.transcoder_mode; - mode->vdisplay = pipe_config->hw.adjusted_mode.crtc_vdisplay; - mode->vtotal = pipe_config->hw.adjusted_mode.crtc_vtotal; - mode->vsync_start = pipe_config->hw.adjusted_mode.crtc_vsync_start; - mode->vsync_end = pipe_config->hw.adjusted_mode.crtc_vsync_end; + mode->hdisplay = hw_mode->crtc_hdisplay; + mode->htotal = hw_mode->crtc_htotal; + mode->hsync_start = hw_mode->crtc_hsync_start; + mode->hsync_end = hw_mode->crtc_hsync_end; - mode->flags = pipe_config->hw.adjusted_mode.flags; + mode->vdisplay = hw_mode->crtc_vdisplay; + mode->vtotal = hw_mode->crtc_vtotal; + mode->vsync_start = hw_mode->crtc_vsync_start; + mode->vsync_end = hw_mode->crtc_vsync_end; + + mode->flags = hw_mode->flags; mode->type =DRM_MODE_TYPE_DRIVER ; - mode->clock = pipe_config->hw.adjusted_mode.crtc_clock; + mode->clock = hw_mode->crtc_clock; mode->hsync =drm_mode_hsync (mode); mode->vrefresh =drm_mode_vrefresh (mode);@@ -10385,6 +10483,8 @@ static void haswell_get_ddi_port_state(struct intel_crtc *crtc,u32 tmp; tmp =I915_READ (TRANS_DDI_FUNC_CTL (pipe_config->cpu_transcoder)); +if (!(tmp &TRANS_DDI_FUNC_ENABLE )) +return ;if (INTEL_GEN (dev_priv) >=12 ) port =TGL_TRANS_DDI_FUNC_CTL_VAL_TO_PORT (tmp);@@ -10455,11 +10555,19 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,WARN_ON (active); active = true; } +intel_dsc_get_config (pipe_config); -if (!active) - goto out; +if (!active) { +/* bigjoiner slave doesn't enable transcoder */ +if (!pipe_config->bigjoiner_slave) + goto out; + + active = true; + pipe_config->pixel_multiplier =1 ; -if (!transcoder_is_dsi (pipe_config->cpu_transcoder) || +/* we cannot read out most state, so don't bother.. */ + pipe_config->quirks |=PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE ; + }else if (!transcoder_is_dsi (pipe_config->cpu_transcoder) ||INTEL_GEN (dev_priv) >=11 ) {haswell_get_ddi_port_state (crtc, pipe_config);intel_get_pipe_timings (crtc, pipe_config);@@ -10513,7 +10621,10 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc, } } -if (pipe_config->cpu_transcoder !=TRANSCODER_EDP && +if (pipe_config->bigjoiner_slave) { +/* Cannot be read out as a slave, set to 0. */ + pipe_config->pixel_multiplier =0 ; + }else if (pipe_config->cpu_transcoder !=TRANSCODER_EDP && !transcoder_is_dsi (pipe_config->cpu_transcoder)) { pipe_config->pixel_multiplier =I915_READ (PIPE_MULT (pipe_config->cpu_transcoder)) +1 ;@@ -11468,7 +11579,7 @@ intel_encoder_current_mode(struct intel_encoder *encoder)return NULL ; } - encoder->get_config (encoder, crtc_state); +intel_encoder_get_config (encoder, crtc_state);intel_mode_from_pipe_config (mode, crtc_state);@@ -12285,9 +12396,11 @@ static void copy_uapi_to_hw_state(struct intel_crtc_state *crtc_state)static void copy_hw_to_uapi_state (struct intel_crtc_state *crtc_state) { - crtc_state->uapi.enable = crtc_state->hw.enable; - crtc_state->uapi.active = crtc_state->hw.active; - crtc_state->uapi.mode = crtc_state->hw.mode; +if (!crtc_state->bigjoiner_slave) { + crtc_state->uapi.enable = crtc_state->hw.enable; + crtc_state->uapi.active = crtc_state->hw.active; + crtc_state->uapi.mode = crtc_state->hw.mode; + } crtc_state->uapi.adjusted_mode = crtc_state->hw.transcoder_mode; }@@ -12318,6 +12431,7 @@ copy_bigjoiner_crtc_state(struct intel_crtc_state *crtc_state, crtc_state->hw.active = from_crtc_state->hw.active; crtc_state->hw.mode = from_crtc_state->hw.mode; crtc_state->hw.adjusted_mode = from_crtc_state->hw.adjusted_mode; + crtc_state->hw.transcoder_mode = from_crtc_state->hw.transcoder_mode;/* Some fixups */ crtc_state->uapi.mode_changed = from_crtc_state->uapi.mode_changed;@@ -12833,19 +12947,41 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,PIPE_CONF_CHECK_X (output_types); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_hdisplay); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_htotal); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_hblank_start); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_hblank_end); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_hsync_start); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_hsync_end); - -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vdisplay); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vtotal); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vblank_start); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vblank_end); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vsync_start); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vsync_end); +if (!PIPE_CONF_QUIRK (PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE )) { +/* bigjoiner mode = transcoder mode / 2, for calculations */ +PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_hdisplay); +PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_htotal); +PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vdisplay); +PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vtotal); + +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_hdisplay); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_htotal); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_hblank_start); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_hblank_end); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_hsync_start); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_hsync_end); + +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_vdisplay); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_vtotal); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_vblank_start); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_vblank_end); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_vsync_start); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_vsync_end); + +PIPE_CONF_CHECK_FLAGS (hw.transcoder_mode.flags, +DRM_MODE_FLAG_INTERLACE ); + +if (!PIPE_CONF_QUIRK (PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS )) { +PIPE_CONF_CHECK_FLAGS (hw.transcoder_mode.flags, +DRM_MODE_FLAG_PHSYNC ); +PIPE_CONF_CHECK_FLAGS (hw.transcoder_mode.flags, +DRM_MODE_FLAG_NHSYNC ); +PIPE_CONF_CHECK_FLAGS (hw.transcoder_mode.flags, +DRM_MODE_FLAG_PVSYNC ); +PIPE_CONF_CHECK_FLAGS (hw.transcoder_mode.flags, +DRM_MODE_FLAG_NVSYNC ); + } + }PIPE_CONF_CHECK_I (pixel_multiplier);PIPE_CONF_CHECK_I (output_format);@@ -12857,24 +12993,11 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,PIPE_CONF_CHECK_BOOL (hdmi_scrambling);PIPE_CONF_CHECK_BOOL (hdmi_high_tmds_clock_ratio);PIPE_CONF_CHECK_BOOL (has_infoframe); -PIPE_CONF_CHECK_BOOL (fec_enable); +if (!PIPE_CONF_QUIRK (PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE )) +PIPE_CONF_CHECK_BOOL (fec_enable);PIPE_CONF_CHECK_BOOL_INCOMPLETE (has_audio); -PIPE_CONF_CHECK_FLAGS (hw.adjusted_mode.flags, -DRM_MODE_FLAG_INTERLACE ); - -if (!PIPE_CONF_QUIRK (PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS )) { -PIPE_CONF_CHECK_FLAGS (hw.adjusted_mode.flags, -DRM_MODE_FLAG_PHSYNC ); -PIPE_CONF_CHECK_FLAGS (hw.adjusted_mode.flags, -DRM_MODE_FLAG_NHSYNC ); -PIPE_CONF_CHECK_FLAGS (hw.adjusted_mode.flags, -DRM_MODE_FLAG_PVSYNC ); -PIPE_CONF_CHECK_FLAGS (hw.adjusted_mode.flags, -DRM_MODE_FLAG_NVSYNC ); - } -PIPE_CONF_CHECK_X (gmch_pfit.control);/* pfit ratios are autocomputed by the hw on gen4+ */ if (INTEL_GEN (dev_priv) <4 )@@ -12898,7 +13021,8 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config, }PIPE_CONF_CHECK_I (scaler_state.scaler_id); -PIPE_CONF_CHECK_CLOCK_FUZZY (pixel_rate); +if (!PIPE_CONF_QUIRK (PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE )) +PIPE_CONF_CHECK_CLOCK_FUZZY (pixel_rate);PIPE_CONF_CHECK_X (gamma_mode);if (IS_CHERRYVIEW (dev_priv))drivers/gpu/drm/i915/display/intel_display.c intel_pipe_config_compare(const struct intel_crtc_state *current_config, · line 13045
Quoted 5 lines
drivers/gpu/drm/i915/display/intel_display.c +1
-0@@ -12917,48 +13041,50 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,PIPE_CONF_CHECK_BOOL (double_wide);PIPE_CONF_CHECK_P (shared_dpll); +if (!PIPE_CONF_QUIRK (PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE )) {PIPE_CONF_CHECK_X (dpll_hw_state.dpll);Missing indent on this line?
Quoted 405 lines
drivers/gpu/drm/i915/display/intel_display.c +82
-47-PIPE_CONF_CHECK_X (dpll_hw_state.dpll_md); -PIPE_CONF_CHECK_X (dpll_hw_state.fp0); -PIPE_CONF_CHECK_X (dpll_hw_state.fp1); -PIPE_CONF_CHECK_X (dpll_hw_state.wrpll); -PIPE_CONF_CHECK_X (dpll_hw_state.spll); -PIPE_CONF_CHECK_X (dpll_hw_state.ctrl1); -PIPE_CONF_CHECK_X (dpll_hw_state.cfgcr1); -PIPE_CONF_CHECK_X (dpll_hw_state.cfgcr2); -PIPE_CONF_CHECK_X (dpll_hw_state.cfgcr0); -PIPE_CONF_CHECK_X (dpll_hw_state.ebb0); -PIPE_CONF_CHECK_X (dpll_hw_state.ebb4); -PIPE_CONF_CHECK_X (dpll_hw_state.pll0); -PIPE_CONF_CHECK_X (dpll_hw_state.pll1); -PIPE_CONF_CHECK_X (dpll_hw_state.pll2); -PIPE_CONF_CHECK_X (dpll_hw_state.pll3); -PIPE_CONF_CHECK_X (dpll_hw_state.pll6); -PIPE_CONF_CHECK_X (dpll_hw_state.pll8); -PIPE_CONF_CHECK_X (dpll_hw_state.pll9); -PIPE_CONF_CHECK_X (dpll_hw_state.pll10); -PIPE_CONF_CHECK_X (dpll_hw_state.pcsdw12); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_refclkin_ctl); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_clktop2_coreclkctl1); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_clktop2_hsclkctl); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_div0); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_div1); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_lf); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_frac_lock); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_ssc); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_bias); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_tdc_coldst_bias); - -PIPE_CONF_CHECK_X (dsi_pll.ctrl); -PIPE_CONF_CHECK_X (dsi_pll.div); - -if (IS_G4X (dev_priv) ||INTEL_GEN (dev_priv) >=5 ) -PIPE_CONF_CHECK_I (pipe_bpp); - -PIPE_CONF_CHECK_CLOCK_FUZZY (hw.adjusted_mode.crtc_clock); -PIPE_CONF_CHECK_CLOCK_FUZZY (port_clock); - -PIPE_CONF_CHECK_I (min_voltage_level); +PIPE_CONF_CHECK_X (dpll_hw_state.dpll_md); +PIPE_CONF_CHECK_X (dpll_hw_state.fp0); +PIPE_CONF_CHECK_X (dpll_hw_state.fp1); +PIPE_CONF_CHECK_X (dpll_hw_state.wrpll); +PIPE_CONF_CHECK_X (dpll_hw_state.spll); +PIPE_CONF_CHECK_X (dpll_hw_state.ctrl1); +PIPE_CONF_CHECK_X (dpll_hw_state.cfgcr1); +PIPE_CONF_CHECK_X (dpll_hw_state.cfgcr2); +PIPE_CONF_CHECK_X (dpll_hw_state.cfgcr0); +PIPE_CONF_CHECK_X (dpll_hw_state.ebb0); +PIPE_CONF_CHECK_X (dpll_hw_state.ebb4); +PIPE_CONF_CHECK_X (dpll_hw_state.pll0); +PIPE_CONF_CHECK_X (dpll_hw_state.pll1); +PIPE_CONF_CHECK_X (dpll_hw_state.pll2); +PIPE_CONF_CHECK_X (dpll_hw_state.pll3); +PIPE_CONF_CHECK_X (dpll_hw_state.pll6); +PIPE_CONF_CHECK_X (dpll_hw_state.pll8); +PIPE_CONF_CHECK_X (dpll_hw_state.pll9); +PIPE_CONF_CHECK_X (dpll_hw_state.pll10); +PIPE_CONF_CHECK_X (dpll_hw_state.pcsdw12); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_refclkin_ctl); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_clktop2_coreclkctl1); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_clktop2_hsclkctl); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_div0); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_div1); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_lf); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_frac_lock); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_ssc); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_bias); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_tdc_coldst_bias); + +PIPE_CONF_CHECK_X (dsi_pll.ctrl); +PIPE_CONF_CHECK_X (dsi_pll.div); + +if (IS_G4X (dev_priv) ||INTEL_GEN (dev_priv) >=5 ) +PIPE_CONF_CHECK_I (pipe_bpp); + +PIPE_CONF_CHECK_CLOCK_FUZZY (hw.adjusted_mode.crtc_clock); +PIPE_CONF_CHECK_CLOCK_FUZZY (port_clock); + +PIPE_CONF_CHECK_I (min_voltage_level); + }PIPE_CONF_CHECK_X (infoframes.enable);PIPE_CONF_CHECK_X (infoframes.gcp);@@ -12967,6 +13093,12 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,PIPE_CONF_CHECK_INFOFRAME (hdmi);PIPE_CONF_CHECK_INFOFRAME (drm); +PIPE_CONF_CHECK_BOOL (bigjoiner); +PIPE_CONF_CHECK_BOOL (bigjoiner_slave); +PIPE_CONF_CHECK_P (bigjoiner_linked_crtc); +PIPE_CONF_CHECK_BOOL (dsc_params.compression_enable); +PIPE_CONF_CHECK_BOOL (dsc_params.dsc_split); +#undef PIPE_CONF_CHECK_X#undef PIPE_CONF_CHECK_I#undef PIPE_CONF_CHECK_BOOL@@ -13221,6 +13353,7 @@ verify_crtc_state(struct intel_crtc *crtc,struct intel_encoder *encoder;struct intel_crtc_state *pipe_config;struct drm_atomic_state *state; +struct intel_crtc *master = crtc;bool active; state = old_crtc_state->uapi.state;@@ -13250,7 +13383,10 @@ verify_crtc_state(struct intel_crtc *crtc,"(expected %i, found %i)\n" , new_crtc_state->hw.active, crtc->active); -for_each_encoder_on_crtc (dev, &crtc->base, encoder) { +if (new_crtc_state->bigjoiner_slave) + master = new_crtc_state->bigjoiner_linked_crtc; + +for_each_encoder_on_crtc (dev, &master->base, encoder) {enum pipe pipe; active = encoder->get_hw_state (encoder, &pipe);@@ -13259,12 +13395,12 @@ verify_crtc_state(struct intel_crtc *crtc, encoder->base.base.id, active, new_crtc_state->hw.active); -I915_STATE_WARN (active && crtc->pipe != pipe, +I915_STATE_WARN (active && master->pipe != pipe,"Encoder connected to wrong pipe %c\n" ,pipe_name (pipe));if (active) - encoder->get_config (encoder, pipe_config); +intel_encoder_get_config (encoder, pipe_config); }intel_crtc_compute_pixel_rate (pipe_config);@@ -13906,6 +14042,7 @@ static void intel_update_crtc(struct intel_crtc *crtc,if (modeset) {update_scanline_offset (new_crtc_state); +drm_calc_timestamping_constants (&crtc->base, &new_crtc_state->hw.transcoder_mode); dev_priv->display.crtc_enable (new_crtc_state, state);/* vblanks work again, re-enable pipe CRC. */ @@ -13990,7 +14127,7 @@ static void intel_commit_modeset_disables(struct intel_atomic_state *state)*/ for_each_oldnew_intel_crtc_in_state_reverse (state, crtc, old_crtc_state, new_crtc_state, i) { -if (!needs_modeset (new_crtc_state)) +if (!needs_modeset (new_crtc_state) || old_crtc_state->bigjoiner_slave)continue ;intel_pre_plane_update (old_crtc_state, new_crtc_state);@@ -14000,6 +14137,19 @@ static void intel_commit_modeset_disables(struct intel_atomic_state *state) old_crtc_state, new_crtc_state, crtc); + +if (old_crtc_state->bigjoiner) { +struct intel_crtc *slave = old_crtc_state->bigjoiner_linked_crtc; +struct intel_crtc_state *old_slave_crtc_state = +intel_atomic_get_crtc_state (&state->base, slave); +struct intel_crtc_state *new_slave_crtc_state = +intel_atomic_get_crtc_state (&state->base, slave); + +intel_old_crtc_state_disables (state, + old_slave_crtc_state, + new_slave_crtc_state, + slave); + } } }@@ -16433,7 +16583,7 @@ int intel_modeset_init(struct drm_device *dev)for_each_intel_crtc (dev, crtc) {struct intel_initial_plane_config plane_config = {}; -if (!crtc->active) +if (!to_intel_crtc_state (crtc->base.state)->uapi.active)continue ;/* @@ -16923,7 +17073,17 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) crtc_state =to_intel_crtc_state (crtc->base.state); encoder->base.crtc = &crtc->base; - encoder->get_config (encoder, crtc_state); +intel_encoder_get_config (encoder, crtc_state); + +/* read out to slave crtc as well for bigjoiner */ +if (crtc_state->bigjoiner) { +/* encoder should read be linked to bigjoiner master */ +WARN_ON (crtc_state->bigjoiner_slave); + + crtc = crtc_state->bigjoiner_linked_crtc; + crtc_state =to_intel_crtc_state (crtc->base.state); +intel_encoder_get_config (encoder, crtc_state); + } }else { encoder->base.crtc =NULL ; }drivers/gpu/drm/i915/display/intel_display_types.h +17
-0@@ -786,6 +786,7 @@ struct intel_crtc_state {* accordingly. */ #define PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS (1<<0)/* unreliable sync mode.flags */ +#define PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE (1<<1)/* bigjoiner slave, partial readout */ unsigned long quirks;unsigned fb_bits;/* framebuffers to flip */ @@ -1572,4 +1573,20 @@ static inline u32 intel_plane_ggtt_offset(const struct intel_plane_state *state) return i915_ggtt_offset(state->vma); } +static inline bool +intel_crtc_supports_dsc (const struct intel_crtc_state *pipe_config) +{ +struct drm_i915_private *dev_priv =to_i915 (pipe_config->uapi.crtc->dev); + +/* On TGL, DSC is supported on all Pipes */ +if (INTEL_GEN (dev_priv) >=12 ) +return true; + +if (INTEL_GEN (dev_priv) >=10 && + pipe_config->cpu_transcoder !=TRANSCODER_A ) +return true; + +return false; +} +#endif /* __INTEL_DISPLAY_TYPES_H__ */ drivers/gpu/drm/i915/display/intel_dp.c +1
-17@@ -1907,22 +1907,6 @@ static bool intel_dp_supports_fec(struct intel_dp *intel_dp,drm_dp_sink_supports_fec (intel_dp->fec_capable); } -static bool intel_dp_source_supports_dsc (struct intel_dp *intel_dp, -const struct intel_crtc_state *pipe_config) -{ -struct drm_i915_private *dev_priv =dp_to_i915 (intel_dp); - -/* On TGL, DSC is supported on all Pipes */ -if (INTEL_GEN (dev_priv) >=12 ) -return true; - -if (INTEL_GEN (dev_priv) >=10 && - pipe_config->cpu_transcoder !=TRANSCODER_A ) -return true; - -return false; -} -static bool intel_dp_supports_dsc (struct intel_dp *intel_dp,const struct intel_crtc_state *pipe_config) {@@ -1930,7 +1914,7 @@ static bool intel_dp_supports_dsc(struct intel_dp *intel_dp,if (!intel_dp_is_edp (intel_dp) && !pipe_config->fec_enable &&0 )return false; -return intel_dp_source_supports_dsc (intel_dp, pipe_config) && +return intel_crtc_supports_dsc (pipe_config) &&drm_dp_sink_supports_dsc (intel_dp->dsc_dpcd); }drivers/gpu/drm/i915/display/intel_vdsc.c +56
-30@@ -480,11 +480,10 @@ intel_dsc_power_domain(const struct intel_crtc_state *crtc_state)return POWER_DOMAIN_TRANSCODER (cpu_transcoder); } -static void intel_configure_pps_for_dsc_encoder (struct intel_encoder *encoder, -const struct intel_crtc_state *crtc_state) +static void intel_configure_pps_for_dsc_encoder (const struct intel_crtc_state *crtc_state) {struct intel_crtc *crtc =to_intel_crtc (crtc_state->uapi.crtc); -struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); +struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev);const struct drm_dsc_config *vdsc_cfg = &crtc_state->dp_dsc_cfg;enum pipe pipe = crtc->pipe;enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;@@ -494,6 +493,9 @@ static void intel_configure_pps_for_dsc_encoder(struct intel_encoder *encoder,u8 num_vdsc_instances = (crtc_state->dsc_params.dsc_split) ?2 :1 ;int i =0 ; +if (crtc_state->bigjoiner) + num_vdsc_instances *=2 ; +/* Populate PICTURE_PARAMETER_SET_0 registers */ pps_val =DSC_VER_MAJ | vdsc_cfg->dsc_version_minor << DSC_VER_MIN_SHIFT |@@ -899,74 +901,104 @@ static void intel_dp_write_dsc_pps_sdp(struct intel_encoder *encoder, sizeof(dp_dsc_pps_sdp)); } +static i915_reg_t dss_ctl1_reg (const struct intel_crtc_state *crtc_state) +{ +enum pipe pipe =to_intel_crtc (crtc_state->uapi.crtc)->pipe; + +if (crtc_state->cpu_transcoder ==TRANSCODER_EDP ) +return DSS_CTL1 ; + +return ICL_PIPE_DSS_CTL1 (pipe); +} + +static i915_reg_t dss_ctl2_reg (const struct intel_crtc_state *crtc_state) +{ +enum pipe pipe =to_intel_crtc (crtc_state->uapi.crtc)->pipe; + +if (crtc_state->cpu_transcoder ==TRANSCODER_EDP ) +return DSS_CTL2 ; + +return ICL_PIPE_DSS_CTL2 (pipe); +} +void intel_dsc_enable (struct intel_encoder *encoder,const struct intel_crtc_state *crtc_state) {struct intel_crtc *crtc =to_intel_crtc (crtc_state->uapi.crtc); -struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); -enum pipe pipe = crtc->pipe; -i915_reg_t dss_ctl1_reg, dss_ctl2_reg; +struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev);u32 dss_ctl1_val =0 ;u32 dss_ctl2_val =0 ;if (!crtc_state->dsc_params.compression_enable)return ; -/* Enable Power wells for VDSC/joining */ -intel_display_power_get (dev_priv, -intel_dsc_power_domain (crtc_state)); +intel_configure_pps_for_dsc_encoder (crtc_state); -intel_configure_pps_for_dsc_encoder (encoder, crtc_state); +if (!crtc_state->bigjoiner_slave) +intel_dp_write_dsc_pps_sdp (encoder, crtc_state); -intel_dp_write_dsc_pps_sdp (encoder, crtc_state); - -if (crtc_state->cpu_transcoder ==TRANSCODER_EDP ) { - dss_ctl1_reg =DSS_CTL1 ; - dss_ctl2_reg =DSS_CTL2 ; - }else { - dss_ctl1_reg =ICL_PIPE_DSS_CTL1 (pipe); - dss_ctl2_reg =ICL_PIPE_DSS_CTL2 (pipe); - } dss_ctl2_val |=LEFT_BRANCH_VDSC_ENABLE ;if (crtc_state->dsc_params.dsc_split) { dss_ctl2_val |=RIGHT_BRANCH_VDSC_ENABLE ; dss_ctl1_val |=JOINER_ENABLE ; } -I915_WRITE (dss_ctl1_reg, dss_ctl1_val); -I915_WRITE (dss_ctl2_reg, dss_ctl2_val); +if (crtc_state->bigjoiner) { + dss_ctl1_val |=BIG_JOINER_ENABLE ; +if (!crtc_state->bigjoiner_slave) + dss_ctl1_val |=MASTER_BIG_JOINER_ENABLE ; + } +I915_WRITE (dss_ctl1_reg (crtc_state), dss_ctl1_val); +I915_WRITE (dss_ctl2_reg (crtc_state), dss_ctl2_val); }void intel_dsc_disable (const struct intel_crtc_state *old_crtc_state) {struct intel_crtc *crtc =to_intel_crtc (old_crtc_state->uapi.crtc);struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev); -enum pipe pipe = crtc->pipe; -i915_reg_t dss_ctl1_reg, dss_ctl2_reg; -u32 dss_ctl1_val =0 , dss_ctl2_val =0 ;if (!old_crtc_state->dsc_params.compression_enable)return ; -if (old_crtc_state->cpu_transcoder ==TRANSCODER_EDP ) { - dss_ctl1_reg =DSS_CTL1 ; - dss_ctl2_reg =DSS_CTL2 ; - }else { - dss_ctl1_reg =ICL_PIPE_DSS_CTL1 (pipe); - dss_ctl2_reg =ICL_PIPE_DSS_CTL2 (pipe); +I915_WRITE (dss_ctl1_reg (old_crtc_state),0 ); +I915_WRITE (dss_ctl2_reg (old_crtc_state),0 ); +} + +void intel_dsc_get_config (struct intel_crtc_state *crtc_state) +{ +struct intel_crtc *crtc =to_intel_crtc (crtc_state->uapi.crtc); +struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev); +u32 dss_ctl1_val, dss_ctl2_val; +intel_wakeref_t wakeref; + +if (!intel_crtc_supports_dsc (crtc_state)) +return ; + + wakeref =intel_display_power_get_if_enabled (dev_priv,intel_dsc_power_domain (crtc_state)); +if (!wakeref) +return ; + + dss_ctl1_val =I915_READ (dss_ctl1_reg (crtc_state)); + dss_ctl2_val =I915_READ (dss_ctl2_reg (crtc_state));
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_vdsc.c static void intel_dp_write_dsc_pps_sdp(struct intel_encoder *encoder, · line 989
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_vdsc.c +8
-0+if (dss_ctl2_val &LEFT_BRANCH_VDSC_ENABLE ) + crtc_state->dsc_params.compression_enable = true; + +if ((dss_ctl1_val &JOINER_ENABLE ) && (dss_ctl2_val &RIGHT_BRANCH_VDSC_ENABLE )) + crtc_state->dsc_params.dsc_split = true; + +if (dss_ctl1_val &BIG_JOINER_ENABLE ) { + crtc_state->bigjoiner = true;
Is crtc_state->bigjoiner supposed to be set on both master and slave or just on the master? I thought we only set it for the master based on what I see in intel_dp_dsc_compute_config, but this appears to set in on both during readout (my interpretation of bspec #50174 is that bit 29 is set on both master and slave, whereas bit 28 is only set on the master). Should this be testing against MASTER_BIG_JOINER_ENABLE instead?
Matt
Quoted 61 lines
Quoted 50 lines
drivers/gpu/drm/i915/display/intel_vdsc.c +13
-15+ +if (!(dss_ctl1_val &MASTER_BIG_JOINER_ENABLE )) { + crtc_state->bigjoiner_slave = true; +if (!WARN_ON (crtc->pipe ==PIPE_A )) + crtc_state->bigjoiner_linked_crtc = +intel_get_crtc_for_pipe (dev_priv, crtc->pipe -1 ); + }else { +if (!WARN_ON (INTEL_NUM_PIPES (dev_priv) == crtc->pipe +1 )) + crtc_state->bigjoiner_linked_crtc = +intel_get_crtc_for_pipe (dev_priv, crtc->pipe +1 ); + } } - dss_ctl1_val =I915_READ (dss_ctl1_reg); -if (dss_ctl1_val &JOINER_ENABLE ) - dss_ctl1_val &= ~JOINER_ENABLE ; -I915_WRITE (dss_ctl1_reg, dss_ctl1_val); - - dss_ctl2_val =I915_READ (dss_ctl2_reg); -if (dss_ctl2_val &LEFT_BRANCH_VDSC_ENABLE || - dss_ctl2_val &RIGHT_BRANCH_VDSC_ENABLE ) - dss_ctl2_val &= ~(LEFT_BRANCH_VDSC_ENABLE | -RIGHT_BRANCH_VDSC_ENABLE ); -I915_WRITE (dss_ctl2_reg, dss_ctl2_val); - -/* Disable Power wells for VDSC/joining */ -intel_display_power_put_unchecked (dev_priv, -intel_dsc_power_domain (old_crtc_state)); + +intel_display_power_put (dev_priv,intel_dsc_power_domain (crtc_state), wakeref); }drivers/gpu/drm/i915/display/intel_vdsc.h +2
-0@@ -15,6 +15,8 @@ void intel_dsc_enable(struct intel_encoder *encoder,void intel_dsc_disable (const struct intel_crtc_state *crtc_state);int intel_dp_compute_dsc_params (struct intel_dp *intel_dp,struct intel_crtc_state *pipe_config); +void intel_dsc_get_config (struct intel_crtc_state *crtc_state); +enum intel_display_power_domain intel_dsc_power_domain (const struct intel_crtc_state *crtc_state);Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfxSignature · 9 lines
Matt Roper Graphics Software Engineer VTT-OSGC Platform Enablement Intel Corporation (916) 356-2795 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 9 lines
Matt Roper Graphics Software Engineer VTT-OSGC Platform Enablement Intel Corporation (916) 356-2795 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerRe: [PATCH 12/23] drm/i915: Enable big joiner support in enable and disable sequences.
Op 27-09-2019 om 01:54 schreef Matt Roper:
Quoted 1,003 lines · Matt Roper
Quoted 1,002 lines · Maarten Lankhorst
Quoted 8 lines
Make vdsc work when no output is enabled. The big joiner needs VDSC on the slave, so enable it and set the appropriate bits. Also update timestamping constants, because slave crtc's are not updated in
drm_atomic_helper_update_legacy_modeset_state().This should be enough to bring up CRTC's in a big joiner configuration, without any plane configuration on the second pipe yet.
Quoted 8 lines
HOWEVER, we bring up the crtc's in the wrong order. We need to make sure that the master crtc is brought up after the slave crtc, we don't do that yet. This is done correctly later in this series.
The next steps are to add atomic commit, and make sure we enable and update both master and slave in the correct order.
Signed-off-by Maarten Lankhorst <[email protected]>A couple minor comments inline below, but I didn't see any clear problems with this patch so
Acked-by Matt Roper <[email protected]>However there's a lot of pretty complicated changes here in areas that I'm only vaguely familiar with, so I think it would be good if someone like Manasi who's more familiar with this area of the code could look it over.
Matt
Quoted 153 lines
--- drivers/gpu/drm/i915/display/intel_ddi.c | 55 ++- drivers/gpu/drm/i915/display/intel_display.c | 402 ++++++++++++------ .../drm/i915/display/intel_display_types.h | 17 + drivers/gpu/drm/i915/display/intel_dp.c | 18 +- drivers/gpu/drm/i915/display/intel_vdsc.c | 122 ++++-- drivers/gpu/drm/i915/display/intel_vdsc.h | 2 + 6 files changed, 418 insertions(+), 198 deletions(-)drivers/gpu/drm/i915/display/intel_ddi.c +40
-15@@ -1694,6 +1694,13 @@ static void intel_ddi_clock_get(struct intel_encoder *encoder,skl_ddi_clock_get (encoder, pipe_config); else if (INTEL_GEN(dev_priv) <= 8) hsw_ddi_clock_get(encoder, pipe_config); + +if (pipe_config->bigjoiner) { + pipe_config->hw.transcoder_mode.crtc_clock = + pipe_config->hw.adjusted_mode.crtc_clock; + + pipe_config->hw.adjusted_mode.crtc_clock /=2 ; + } }void intel_ddi_set_pipe_settings (const struct intel_crtc_state *crtc_state)@@ -2176,13 +2183,6 @@ static void intel_ddi_get_power_domains(struct intel_encoder *encoder, intel_phy_is_tc(dev_priv, phy))intel_display_power_get (dev_priv,intel_ddi_main_link_aux_domain (dig_port)); - -/* -* VDSC power is needed when DSC is enabled -*/ -if (crtc_state->dsc_params.compression_enable) -intel_display_power_get (dev_priv, -intel_dsc_power_domain (crtc_state)); }void intel_ddi_enable_pipe_clock (const struct intel_crtc_state *crtc_state)@@ -3290,7 +3290,8 @@ static void tgl_ddi_pre_enable_dp(struct intel_encoder *encoder,/* 7.l */ intel_ddi_enable_fec (encoder, crtc_state); -intel_dsc_enable (encoder, crtc_state); +if (!crtc_state->bigjoiner) +intel_dsc_enable (encoder, crtc_state); } static void hsw_ddi_pre_enable_dp(struct intel_encoder *encoder,@@ -3361,7 +3362,8 @@ static void hsw_ddi_pre_enable_dp(struct intel_encoder *encoder,if (!is_mst)intel_ddi_enable_pipe_clock (crtc_state); -intel_dsc_enable (encoder, crtc_state); +if (!crtc_state->bigjoiner) +intel_dsc_enable (encoder, crtc_state); } static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,@@ -3972,19 +3974,18 @@ void intel_ddi_compute_min_voltage_level(struct drm_i915_private *dev_priv, crtc_state->min_voltage_level =2 ; } -void intel_ddi_get_config (struct intel_encoder *encoder, -struct intel_crtc_state *pipe_config) +static void intel_ddi_read_func_ctl (struct intel_encoder *encoder, +struct intel_crtc_state *pipe_config) {struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev);struct intel_crtc *intel_crtc =to_intel_crtc (pipe_config->uapi.crtc);enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;u32 temp, flags =0 ; -/* XXX: DSI transcoder paranoia */ -if (WARN_ON (transcoder_is_dsi (cpu_transcoder))) + temp =I915_READ (TRANS_DDI_FUNC_CTL (cpu_transcoder)); +if (!(temp &TRANS_DDI_FUNC_ENABLE ))return ; - temp =I915_READ (TRANS_DDI_FUNC_CTL (cpu_transcoder));if (temp &TRANS_DDI_PHSYNC ) flags |=DRM_MODE_FLAG_PHSYNC ;else @@ -4066,6 +4067,29 @@ void intel_ddi_get_config(struct intel_encoder *encoder,default :break ; } +} + +void intel_ddi_get_config (struct intel_encoder *encoder, +struct intel_crtc_state *pipe_config) +{ +struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); +enum transcoder cpu_transcoder = pipe_config->cpu_transcoder; + +/* XXX: DSI transcoder paranoia */ +if (WARN_ON (transcoder_is_dsi (cpu_transcoder))) +return ; + +intel_ddi_read_func_ctl (encoder, pipe_config); +if (pipe_config->bigjoiner_slave) { +/* read out pipe settings from master */ +enum transcoder save = pipe_config->cpu_transcoder; + +/* Our own transcoder needs to be disabled when reading it in intel_ddi_read_func_ctl() */ +WARN_ON (pipe_config->output_types); + pipe_config->cpu_transcoder = (enum transcoder )pipe_config->bigjoiner_linked_crtc->pipe; +intel_ddi_read_func_ctl (encoder, pipe_config); + pipe_config->cpu_transcoder = save; + } pipe_config->has_audio =intel_ddi_is_audio_enabled (dev_priv, cpu_transcoder);@@ -4090,7 +4114,8 @@ void intel_ddi_get_config(struct intel_encoder *encoder, dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp; } -intel_ddi_clock_get (encoder, pipe_config); +if (!pipe_config->bigjoiner_slave) +intel_ddi_clock_get (encoder, pipe_config);if (IS_GEN9_LP (dev_priv)) pipe_config->lane_lat_optim_mask =drivers/gpu/drm/i915/display/intel_display.c +20
-0@@ -6449,6 +6449,45 @@ static void icl_pipe_mbus_enable(struct intel_crtc *crtc)I915_WRITE (PIPE_MBUS_DBOX_CTL (pipe), val); } +static void icl_ddi_bigjoiner_pre_enable (struct intel_atomic_state *state, +struct intel_crtc_state *crtc_state) +{ +struct intel_crtc *master =to_intel_crtc (crtc_state->uapi.crtc); +struct intel_crtc_state *master_crtc_state; +struct drm_connector_state *conn_state; +struct drm_connector *conn; +struct intel_encoder *encoder =NULL ; +int i; + +if (crtc_state->bigjoiner_slave) + master = crtc_state->bigjoiner_linked_crtc; + + master_crtc_state =intel_atomic_get_new_crtc_state (state, master); + +for_each_new_connector_in_state (&state->base, conn, conn_state, i) { +if (conn_state->crtc != &master->base) +continue ; + + encoder =to_intel_encoder (conn_state->best_encoder);drivers/gpu/drm/i915/display/intel_display.c static void icl_pipe_mbus_enable(struct intel_crtc *crtc) · line 6481
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +10
-0+break ; + } + +if (!crtc_state->bigjoiner_slave) { +/* need to enable VDSC, which we skipped in pre-enable */ +intel_dsc_enable (encoder, crtc_state); + }else { +/* +* Enable sequence steps 1-7 on bigjoiner master +*/ I'd extend this comment to indicate that we do this on the slave (using the master's state, transcoder, and DDI) because the [will] program the slave CRTC before the master.
Quoted 386 lines
drivers/gpu/drm/i915/display/intel_display.c +168
-74+intel_encoders_pre_pll_enable (master, master_crtc_state, state); +intel_enable_shared_dpll (master_crtc_state); +intel_encoders_pre_enable (master, master_crtc_state, state); + +/* and DSC on slave */ +intel_dsc_enable (NULL , crtc_state); + } +} +static void haswell_crtc_enable (struct intel_crtc_state *pipe_config,struct intel_atomic_state *state) {@@ -6462,37 +6501,38 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,if (WARN_ON (intel_crtc->active))return ; -intel_encoders_pre_pll_enable (intel_crtc, pipe_config, state); +if (!pipe_config->bigjoiner) { +intel_encoders_pre_pll_enable (intel_crtc, pipe_config, state); -if (pipe_config->shared_dpll) -intel_enable_shared_dpll (pipe_config); +if (pipe_config->shared_dpll) +intel_enable_shared_dpll (pipe_config); -intel_encoders_pre_enable (intel_crtc, pipe_config, state); +intel_encoders_pre_enable (intel_crtc, pipe_config, state); + }else { +icl_ddi_bigjoiner_pre_enable (state, pipe_config); + } -if (intel_crtc_has_dp_encoder (pipe_config)) -intel_dp_set_m_n (pipe_config,M1_N1 ); +intel_set_pipe_src_size (pipe_config); +if (INTEL_GEN (dev_priv) >=9 ||IS_BROADWELL (dev_priv)) +bdw_set_pipemisc (pipe_config); -if (!transcoder_is_dsi (cpu_transcoder)) -intel_set_pipe_timings (pipe_config); +if (!pipe_config->bigjoiner_slave && !transcoder_is_dsi (cpu_transcoder)) { +if (intel_crtc_has_dp_encoder (pipe_config)) +intel_dp_set_m_n (pipe_config,M1_N1 ); -intel_set_pipe_src_size (pipe_config); +intel_set_pipe_timings (pipe_config); -if (cpu_transcoder !=TRANSCODER_EDP && - !transcoder_is_dsi (cpu_transcoder)) { -I915_WRITE (PIPE_MULT (cpu_transcoder), - pipe_config->pixel_multiplier -1 ); - } +if (cpu_transcoder !=TRANSCODER_EDP ) +I915_WRITE (PIPE_MULT (cpu_transcoder), + pipe_config->pixel_multiplier -1 ); -if (pipe_config->has_pch_encoder) { -intel_cpu_transcoder_set_m_n (pipe_config, - &pipe_config->fdi_m_n,NULL ); - } +if (pipe_config->has_pch_encoder) { +intel_cpu_transcoder_set_m_n (pipe_config, + &pipe_config->fdi_m_n,NULL ); + } -if (!transcoder_is_dsi (cpu_transcoder))haswell_set_pipeconf (pipe_config); - -if (INTEL_GEN (dev_priv) >=9 ||IS_BROADWELL (dev_priv)) -bdw_set_pipemisc (pipe_config); + } intel_crtc->active = true;@@ -6520,9 +6560,11 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,if (INTEL_GEN (dev_priv) >=11 )icl_set_pipe_chicken (intel_crtc); -intel_ddi_set_pipe_settings (pipe_config); -if (!transcoder_is_dsi (cpu_transcoder)) +if (!pipe_config->bigjoiner_slave && !transcoder_is_dsi (cpu_transcoder)) { +intel_ddi_set_pipe_settings (pipe_config); +intel_ddi_enable_transcoder_func (pipe_config); + }if (dev_priv->display.initial_watermarks !=NULL ) dev_priv->display.initial_watermarks (state, pipe_config);@@ -6531,8 +6573,10 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,icl_pipe_mbus_enable (intel_crtc);/* XXX: Do the pipe assertions at the right place for BXT DSI. */ -if (!transcoder_is_dsi (cpu_transcoder)) +if (!pipe_config->bigjoiner_slave && !transcoder_is_dsi (cpu_transcoder))intel_enable_pipe (pipe_config); +else +trace_intel_pipe_enable (intel_crtc);if (pipe_config->has_pch_encoder)lpt_pch_enable (state, pipe_config);@@ -6663,9 +6707,27 @@ static void haswell_crtc_disable(struct intel_crtc_state *old_crtc_state,else ironlake_pfit_disable (old_crtc_state); -intel_encoders_post_disable (intel_crtc, old_crtc_state, state); +if (old_crtc_state->bigjoiner) { +struct intel_crtc *master; +struct intel_crtc_state *master_crtc_state; -intel_encoders_post_pll_disable (intel_crtc, old_crtc_state, state); +/* ports are disabled from the slave, after it deconfigures */ +if (!old_crtc_state->bigjoiner_slave) +return ; + + master = old_crtc_state->bigjoiner_linked_crtc; + master_crtc_state =intel_atomic_get_old_crtc_state (state, master); + +intel_ddi_disable_pipe_clock (old_crtc_state); + +/* disable ports on the master crtc */ +intel_encoders_post_disable (master, master_crtc_state, state); +intel_encoders_post_pll_disable (master, master_crtc_state, state); + }else { +intel_encoders_post_disable (intel_crtc, old_crtc_state, state); + +intel_encoders_post_pll_disable (intel_crtc, old_crtc_state, state); + } }static void i9xx_pfit_enable (const struct intel_crtc_state *crtc_state)@@ -6829,6 +6891,9 @@ static u64 get_crtc_power_domains(struct intel_crtc_state *crtc_state)if (crtc_state->shared_dpll) mask |=BIT_ULL (POWER_DOMAIN_DISPLAY_CORE ); +if (crtc_state->dsc_params.compression_enable) + mask |=BIT_ULL (intel_dsc_power_domain (crtc_state)); +return mask; }@@ -7417,6 +7482,19 @@ static u32 ilk_pipe_pixel_rate(const struct intel_crtc_state *pipe_config)return pixel_rate; } +static void intel_encoder_get_config (struct intel_encoder *encoder, +struct intel_crtc_state *crtc_state) +{ + encoder->get_config (encoder, crtc_state); + + crtc_state->hw.transcoder_mode.flags = crtc_state->hw.adjusted_mode.flags; + +/* if transcoder clock is not set, assume same as adjusted_mode clock */ +if (!crtc_state->hw.transcoder_mode.crtc_clock) + crtc_state->hw.transcoder_mode.crtc_clock = + crtc_state->hw.adjusted_mode.crtc_clock; +} +static void intel_crtc_compute_pixel_rate (struct intel_crtc_state *crtc_state) {struct drm_i915_private *dev_priv =to_i915 (crtc_state->uapi.crtc->dev);@@ -8265,6 +8343,24 @@ static void intel_get_pipe_timings(struct intel_crtc *crtc, pipe_config->hw.adjusted_mode.crtc_vtotal +=1 ; pipe_config->hw.adjusted_mode.crtc_vblank_end +=1 ; } + + pipe_config->hw.transcoder_mode = pipe_config->hw.adjusted_mode; +if (pipe_config->bigjoiner) { +struct drm_display_mode *adjusted_mode = + &pipe_config->hw.adjusted_mode; + +/* +* transcoder is programmed to the full mode, +* but pipje timings are half of the transcoder mode +*/ + adjusted_mode->crtc_hdisplay /=2 ; + adjusted_mode->crtc_hblank_start /=2 ; + adjusted_mode->crtc_hblank_end /=2 ; + adjusted_mode->crtc_hsync_start /=2 ; + adjusted_mode->crtc_hsync_end /=2 ; + adjusted_mode->crtc_htotal /=2 ; + adjusted_mode->crtc_hskew /=2 ; + } } static void intel_get_pipe_src_size(struct intel_crtc *crtc,@@ -8285,20 +8381,22 @@ static void intel_get_pipe_src_size(struct intel_crtc *crtc,void intel_mode_from_pipe_config (struct drm_display_mode *mode,struct intel_crtc_state *pipe_config) { - mode->hdisplay = pipe_config->hw.adjusted_mode.crtc_hdisplay; - mode->htotal = pipe_config->hw.adjusted_mode.crtc_htotal; - mode->hsync_start = pipe_config->hw.adjusted_mode.crtc_hsync_start; - mode->hsync_end = pipe_config->hw.adjusted_mode.crtc_hsync_end; +struct drm_display_mode *hw_mode = &pipe_config->hw.transcoder_mode; - mode->vdisplay = pipe_config->hw.adjusted_mode.crtc_vdisplay; - mode->vtotal = pipe_config->hw.adjusted_mode.crtc_vtotal; - mode->vsync_start = pipe_config->hw.adjusted_mode.crtc_vsync_start; - mode->vsync_end = pipe_config->hw.adjusted_mode.crtc_vsync_end; + mode->hdisplay = hw_mode->crtc_hdisplay; + mode->htotal = hw_mode->crtc_htotal; + mode->hsync_start = hw_mode->crtc_hsync_start; + mode->hsync_end = hw_mode->crtc_hsync_end; - mode->flags = pipe_config->hw.adjusted_mode.flags; + mode->vdisplay = hw_mode->crtc_vdisplay; + mode->vtotal = hw_mode->crtc_vtotal; + mode->vsync_start = hw_mode->crtc_vsync_start; + mode->vsync_end = hw_mode->crtc_vsync_end; + + mode->flags = hw_mode->flags; mode->type =DRM_MODE_TYPE_DRIVER ; - mode->clock = pipe_config->hw.adjusted_mode.crtc_clock; + mode->clock = hw_mode->crtc_clock; mode->hsync =drm_mode_hsync (mode); mode->vrefresh =drm_mode_vrefresh (mode);@@ -10385,6 +10483,8 @@ static void haswell_get_ddi_port_state(struct intel_crtc *crtc,u32 tmp; tmp =I915_READ (TRANS_DDI_FUNC_CTL (pipe_config->cpu_transcoder)); +if (!(tmp &TRANS_DDI_FUNC_ENABLE )) +return ;if (INTEL_GEN (dev_priv) >=12 ) port =TGL_TRANS_DDI_FUNC_CTL_VAL_TO_PORT (tmp);@@ -10455,11 +10555,19 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,WARN_ON (active); active = true; } +intel_dsc_get_config (pipe_config); -if (!active) - goto out; +if (!active) { +/* bigjoiner slave doesn't enable transcoder */ +if (!pipe_config->bigjoiner_slave) + goto out; + + active = true; + pipe_config->pixel_multiplier =1 ; -if (!transcoder_is_dsi (pipe_config->cpu_transcoder) || +/* we cannot read out most state, so don't bother.. */ + pipe_config->quirks |=PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE ; + }else if (!transcoder_is_dsi (pipe_config->cpu_transcoder) ||INTEL_GEN (dev_priv) >=11 ) {haswell_get_ddi_port_state (crtc, pipe_config);intel_get_pipe_timings (crtc, pipe_config);@@ -10513,7 +10621,10 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc, } } -if (pipe_config->cpu_transcoder !=TRANSCODER_EDP && +if (pipe_config->bigjoiner_slave) { +/* Cannot be read out as a slave, set to 0. */ + pipe_config->pixel_multiplier =0 ; + }else if (pipe_config->cpu_transcoder !=TRANSCODER_EDP && !transcoder_is_dsi (pipe_config->cpu_transcoder)) { pipe_config->pixel_multiplier =I915_READ (PIPE_MULT (pipe_config->cpu_transcoder)) +1 ;@@ -11468,7 +11579,7 @@ intel_encoder_current_mode(struct intel_encoder *encoder)return NULL ; } - encoder->get_config (encoder, crtc_state); +intel_encoder_get_config (encoder, crtc_state);intel_mode_from_pipe_config (mode, crtc_state);@@ -12285,9 +12396,11 @@ static void copy_uapi_to_hw_state(struct intel_crtc_state *crtc_state)static void copy_hw_to_uapi_state (struct intel_crtc_state *crtc_state) { - crtc_state->uapi.enable = crtc_state->hw.enable; - crtc_state->uapi.active = crtc_state->hw.active; - crtc_state->uapi.mode = crtc_state->hw.mode; +if (!crtc_state->bigjoiner_slave) { + crtc_state->uapi.enable = crtc_state->hw.enable; + crtc_state->uapi.active = crtc_state->hw.active; + crtc_state->uapi.mode = crtc_state->hw.mode; + } crtc_state->uapi.adjusted_mode = crtc_state->hw.transcoder_mode; }@@ -12318,6 +12431,7 @@ copy_bigjoiner_crtc_state(struct intel_crtc_state *crtc_state, crtc_state->hw.active = from_crtc_state->hw.active; crtc_state->hw.mode = from_crtc_state->hw.mode; crtc_state->hw.adjusted_mode = from_crtc_state->hw.adjusted_mode; + crtc_state->hw.transcoder_mode = from_crtc_state->hw.transcoder_mode;/* Some fixups */ crtc_state->uapi.mode_changed = from_crtc_state->uapi.mode_changed;@@ -12833,19 +12947,41 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,PIPE_CONF_CHECK_X (output_types); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_hdisplay); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_htotal); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_hblank_start); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_hblank_end); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_hsync_start); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_hsync_end); - -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vdisplay); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vtotal); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vblank_start); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vblank_end); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vsync_start); -PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vsync_end); +if (!PIPE_CONF_QUIRK (PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE )) { +/* bigjoiner mode = transcoder mode / 2, for calculations */ +PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_hdisplay); +PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_htotal); +PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vdisplay); +PIPE_CONF_CHECK_I (hw.adjusted_mode.crtc_vtotal); + +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_hdisplay); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_htotal); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_hblank_start); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_hblank_end); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_hsync_start); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_hsync_end); + +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_vdisplay); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_vtotal); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_vblank_start); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_vblank_end); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_vsync_start); +PIPE_CONF_CHECK_I (hw.transcoder_mode.crtc_vsync_end); + +PIPE_CONF_CHECK_FLAGS (hw.transcoder_mode.flags, +DRM_MODE_FLAG_INTERLACE ); + +if (!PIPE_CONF_QUIRK (PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS )) { +PIPE_CONF_CHECK_FLAGS (hw.transcoder_mode.flags, +DRM_MODE_FLAG_PHSYNC ); +PIPE_CONF_CHECK_FLAGS (hw.transcoder_mode.flags, +DRM_MODE_FLAG_NHSYNC ); +PIPE_CONF_CHECK_FLAGS (hw.transcoder_mode.flags, +DRM_MODE_FLAG_PVSYNC ); +PIPE_CONF_CHECK_FLAGS (hw.transcoder_mode.flags, +DRM_MODE_FLAG_NVSYNC ); + } + }PIPE_CONF_CHECK_I (pixel_multiplier);PIPE_CONF_CHECK_I (output_format);@@ -12857,24 +12993,11 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,PIPE_CONF_CHECK_BOOL (hdmi_scrambling);PIPE_CONF_CHECK_BOOL (hdmi_high_tmds_clock_ratio);PIPE_CONF_CHECK_BOOL (has_infoframe); -PIPE_CONF_CHECK_BOOL (fec_enable); +if (!PIPE_CONF_QUIRK (PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE )) +PIPE_CONF_CHECK_BOOL (fec_enable);PIPE_CONF_CHECK_BOOL_INCOMPLETE (has_audio); -PIPE_CONF_CHECK_FLAGS (hw.adjusted_mode.flags, -DRM_MODE_FLAG_INTERLACE ); - -if (!PIPE_CONF_QUIRK (PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS )) { -PIPE_CONF_CHECK_FLAGS (hw.adjusted_mode.flags, -DRM_MODE_FLAG_PHSYNC ); -PIPE_CONF_CHECK_FLAGS (hw.adjusted_mode.flags, -DRM_MODE_FLAG_NHSYNC ); -PIPE_CONF_CHECK_FLAGS (hw.adjusted_mode.flags, -DRM_MODE_FLAG_PVSYNC ); -PIPE_CONF_CHECK_FLAGS (hw.adjusted_mode.flags, -DRM_MODE_FLAG_NVSYNC ); - } -PIPE_CONF_CHECK_X (gmch_pfit.control);/* pfit ratios are autocomputed by the hw on gen4+ */ if (INTEL_GEN (dev_priv) <4 )@@ -12898,7 +13021,8 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config, }PIPE_CONF_CHECK_I (scaler_state.scaler_id); -PIPE_CONF_CHECK_CLOCK_FUZZY (pixel_rate); +if (!PIPE_CONF_QUIRK (PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE )) +PIPE_CONF_CHECK_CLOCK_FUZZY (pixel_rate);PIPE_CONF_CHECK_X (gamma_mode);if (IS_CHERRYVIEW (dev_priv))drivers/gpu/drm/i915/display/intel_display.c intel_pipe_config_compare(const struct intel_crtc_state *current_config, · line 13045
Quoted 5 lines
drivers/gpu/drm/i915/display/intel_display.c +1
-0@@ -12917,48 +13041,50 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,PIPE_CONF_CHECK_BOOL (double_wide);PIPE_CONF_CHECK_P (shared_dpll); +if (!PIPE_CONF_QUIRK (PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE )) {PIPE_CONF_CHECK_X (dpll_hw_state.dpll);Missing indent on this line?
Quoted 411 lines
drivers/gpu/drm/i915/display/intel_display.c +82
-47-PIPE_CONF_CHECK_X (dpll_hw_state.dpll_md); -PIPE_CONF_CHECK_X (dpll_hw_state.fp0); -PIPE_CONF_CHECK_X (dpll_hw_state.fp1); -PIPE_CONF_CHECK_X (dpll_hw_state.wrpll); -PIPE_CONF_CHECK_X (dpll_hw_state.spll); -PIPE_CONF_CHECK_X (dpll_hw_state.ctrl1); -PIPE_CONF_CHECK_X (dpll_hw_state.cfgcr1); -PIPE_CONF_CHECK_X (dpll_hw_state.cfgcr2); -PIPE_CONF_CHECK_X (dpll_hw_state.cfgcr0); -PIPE_CONF_CHECK_X (dpll_hw_state.ebb0); -PIPE_CONF_CHECK_X (dpll_hw_state.ebb4); -PIPE_CONF_CHECK_X (dpll_hw_state.pll0); -PIPE_CONF_CHECK_X (dpll_hw_state.pll1); -PIPE_CONF_CHECK_X (dpll_hw_state.pll2); -PIPE_CONF_CHECK_X (dpll_hw_state.pll3); -PIPE_CONF_CHECK_X (dpll_hw_state.pll6); -PIPE_CONF_CHECK_X (dpll_hw_state.pll8); -PIPE_CONF_CHECK_X (dpll_hw_state.pll9); -PIPE_CONF_CHECK_X (dpll_hw_state.pll10); -PIPE_CONF_CHECK_X (dpll_hw_state.pcsdw12); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_refclkin_ctl); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_clktop2_coreclkctl1); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_clktop2_hsclkctl); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_div0); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_div1); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_lf); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_frac_lock); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_ssc); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_bias); -PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_tdc_coldst_bias); - -PIPE_CONF_CHECK_X (dsi_pll.ctrl); -PIPE_CONF_CHECK_X (dsi_pll.div); - -if (IS_G4X (dev_priv) ||INTEL_GEN (dev_priv) >=5 ) -PIPE_CONF_CHECK_I (pipe_bpp); - -PIPE_CONF_CHECK_CLOCK_FUZZY (hw.adjusted_mode.crtc_clock); -PIPE_CONF_CHECK_CLOCK_FUZZY (port_clock); - -PIPE_CONF_CHECK_I (min_voltage_level); +PIPE_CONF_CHECK_X (dpll_hw_state.dpll_md); +PIPE_CONF_CHECK_X (dpll_hw_state.fp0); +PIPE_CONF_CHECK_X (dpll_hw_state.fp1); +PIPE_CONF_CHECK_X (dpll_hw_state.wrpll); +PIPE_CONF_CHECK_X (dpll_hw_state.spll); +PIPE_CONF_CHECK_X (dpll_hw_state.ctrl1); +PIPE_CONF_CHECK_X (dpll_hw_state.cfgcr1); +PIPE_CONF_CHECK_X (dpll_hw_state.cfgcr2); +PIPE_CONF_CHECK_X (dpll_hw_state.cfgcr0); +PIPE_CONF_CHECK_X (dpll_hw_state.ebb0); +PIPE_CONF_CHECK_X (dpll_hw_state.ebb4); +PIPE_CONF_CHECK_X (dpll_hw_state.pll0); +PIPE_CONF_CHECK_X (dpll_hw_state.pll1); +PIPE_CONF_CHECK_X (dpll_hw_state.pll2); +PIPE_CONF_CHECK_X (dpll_hw_state.pll3); +PIPE_CONF_CHECK_X (dpll_hw_state.pll6); +PIPE_CONF_CHECK_X (dpll_hw_state.pll8); +PIPE_CONF_CHECK_X (dpll_hw_state.pll9); +PIPE_CONF_CHECK_X (dpll_hw_state.pll10); +PIPE_CONF_CHECK_X (dpll_hw_state.pcsdw12); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_refclkin_ctl); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_clktop2_coreclkctl1); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_clktop2_hsclkctl); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_div0); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_div1); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_lf); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_frac_lock); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_ssc); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_bias); +PIPE_CONF_CHECK_X (dpll_hw_state.mg_pll_tdc_coldst_bias); + +PIPE_CONF_CHECK_X (dsi_pll.ctrl); +PIPE_CONF_CHECK_X (dsi_pll.div); + +if (IS_G4X (dev_priv) ||INTEL_GEN (dev_priv) >=5 ) +PIPE_CONF_CHECK_I (pipe_bpp); + +PIPE_CONF_CHECK_CLOCK_FUZZY (hw.adjusted_mode.crtc_clock); +PIPE_CONF_CHECK_CLOCK_FUZZY (port_clock); + +PIPE_CONF_CHECK_I (min_voltage_level); + }PIPE_CONF_CHECK_X (infoframes.enable);PIPE_CONF_CHECK_X (infoframes.gcp);@@ -12967,6 +13093,12 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,PIPE_CONF_CHECK_INFOFRAME (hdmi);PIPE_CONF_CHECK_INFOFRAME (drm); +PIPE_CONF_CHECK_BOOL (bigjoiner); +PIPE_CONF_CHECK_BOOL (bigjoiner_slave); +PIPE_CONF_CHECK_P (bigjoiner_linked_crtc); +PIPE_CONF_CHECK_BOOL (dsc_params.compression_enable); +PIPE_CONF_CHECK_BOOL (dsc_params.dsc_split); +#undef PIPE_CONF_CHECK_X#undef PIPE_CONF_CHECK_I#undef PIPE_CONF_CHECK_BOOL@@ -13221,6 +13353,7 @@ verify_crtc_state(struct intel_crtc *crtc,struct intel_encoder *encoder;struct intel_crtc_state *pipe_config;struct drm_atomic_state *state; +struct intel_crtc *master = crtc;bool active; state = old_crtc_state->uapi.state;@@ -13250,7 +13383,10 @@ verify_crtc_state(struct intel_crtc *crtc,"(expected %i, found %i)\n" , new_crtc_state->hw.active, crtc->active); -for_each_encoder_on_crtc (dev, &crtc->base, encoder) { +if (new_crtc_state->bigjoiner_slave) + master = new_crtc_state->bigjoiner_linked_crtc; + +for_each_encoder_on_crtc (dev, &master->base, encoder) {enum pipe pipe; active = encoder->get_hw_state (encoder, &pipe);@@ -13259,12 +13395,12 @@ verify_crtc_state(struct intel_crtc *crtc, encoder->base.base.id, active, new_crtc_state->hw.active); -I915_STATE_WARN (active && crtc->pipe != pipe, +I915_STATE_WARN (active && master->pipe != pipe,"Encoder connected to wrong pipe %c\n" ,pipe_name (pipe));if (active) - encoder->get_config (encoder, pipe_config); +intel_encoder_get_config (encoder, pipe_config); }intel_crtc_compute_pixel_rate (pipe_config);@@ -13906,6 +14042,7 @@ static void intel_update_crtc(struct intel_crtc *crtc,if (modeset) {update_scanline_offset (new_crtc_state); +drm_calc_timestamping_constants (&crtc->base, &new_crtc_state->hw.transcoder_mode); dev_priv->display.crtc_enable (new_crtc_state, state);/* vblanks work again, re-enable pipe CRC. */ @@ -13990,7 +14127,7 @@ static void intel_commit_modeset_disables(struct intel_atomic_state *state)*/ for_each_oldnew_intel_crtc_in_state_reverse (state, crtc, old_crtc_state, new_crtc_state, i) { -if (!needs_modeset (new_crtc_state)) +if (!needs_modeset (new_crtc_state) || old_crtc_state->bigjoiner_slave)continue ;intel_pre_plane_update (old_crtc_state, new_crtc_state);@@ -14000,6 +14137,19 @@ static void intel_commit_modeset_disables(struct intel_atomic_state *state) old_crtc_state, new_crtc_state, crtc); + +if (old_crtc_state->bigjoiner) { +struct intel_crtc *slave = old_crtc_state->bigjoiner_linked_crtc; +struct intel_crtc_state *old_slave_crtc_state = +intel_atomic_get_crtc_state (&state->base, slave); +struct intel_crtc_state *new_slave_crtc_state = +intel_atomic_get_crtc_state (&state->base, slave); + +intel_old_crtc_state_disables (state, + old_slave_crtc_state, + new_slave_crtc_state, + slave); + } } }@@ -16433,7 +16583,7 @@ int intel_modeset_init(struct drm_device *dev)for_each_intel_crtc (dev, crtc) {struct intel_initial_plane_config plane_config = {}; -if (!crtc->active) +if (!to_intel_crtc_state (crtc->base.state)->uapi.active)continue ;/* @@ -16923,7 +17073,17 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) crtc_state =to_intel_crtc_state (crtc->base.state); encoder->base.crtc = &crtc->base; - encoder->get_config (encoder, crtc_state); +intel_encoder_get_config (encoder, crtc_state); + +/* read out to slave crtc as well for bigjoiner */ +if (crtc_state->bigjoiner) { +/* encoder should read be linked to bigjoiner master */ +WARN_ON (crtc_state->bigjoiner_slave); + + crtc = crtc_state->bigjoiner_linked_crtc; + crtc_state =to_intel_crtc_state (crtc->base.state); +intel_encoder_get_config (encoder, crtc_state); + } }else { encoder->base.crtc =NULL ; }drivers/gpu/drm/i915/display/intel_display_types.h +17
-0@@ -786,6 +786,7 @@ struct intel_crtc_state {* accordingly. */ #define PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS (1<<0)/* unreliable sync mode.flags */ +#define PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE (1<<1)/* bigjoiner slave, partial readout */ unsigned long quirks;unsigned fb_bits;/* framebuffers to flip */ @@ -1572,4 +1573,20 @@ static inline u32 intel_plane_ggtt_offset(const struct intel_plane_state *state) return i915_ggtt_offset(state->vma); } +static inline bool +intel_crtc_supports_dsc (const struct intel_crtc_state *pipe_config) +{ +struct drm_i915_private *dev_priv =to_i915 (pipe_config->uapi.crtc->dev); + +/* On TGL, DSC is supported on all Pipes */ +if (INTEL_GEN (dev_priv) >=12 ) +return true; + +if (INTEL_GEN (dev_priv) >=10 && + pipe_config->cpu_transcoder !=TRANSCODER_A ) +return true; + +return false; +} +#endif /* __INTEL_DISPLAY_TYPES_H__ */ drivers/gpu/drm/i915/display/intel_dp.c +1
-17@@ -1907,22 +1907,6 @@ static bool intel_dp_supports_fec(struct intel_dp *intel_dp,drm_dp_sink_supports_fec (intel_dp->fec_capable); } -static bool intel_dp_source_supports_dsc (struct intel_dp *intel_dp, -const struct intel_crtc_state *pipe_config) -{ -struct drm_i915_private *dev_priv =dp_to_i915 (intel_dp); - -/* On TGL, DSC is supported on all Pipes */ -if (INTEL_GEN (dev_priv) >=12 ) -return true; - -if (INTEL_GEN (dev_priv) >=10 && - pipe_config->cpu_transcoder !=TRANSCODER_A ) -return true; - -return false; -} -static bool intel_dp_supports_dsc (struct intel_dp *intel_dp,const struct intel_crtc_state *pipe_config) {@@ -1930,7 +1914,7 @@ static bool intel_dp_supports_dsc(struct intel_dp *intel_dp,if (!intel_dp_is_edp (intel_dp) && !pipe_config->fec_enable &&0 )return false; -return intel_dp_source_supports_dsc (intel_dp, pipe_config) && +return intel_crtc_supports_dsc (pipe_config) &&drm_dp_sink_supports_dsc (intel_dp->dsc_dpcd); }drivers/gpu/drm/i915/display/intel_vdsc.c +62
-30@@ -480,11 +480,10 @@ intel_dsc_power_domain(const struct intel_crtc_state *crtc_state)return POWER_DOMAIN_TRANSCODER (cpu_transcoder); } -static void intel_configure_pps_for_dsc_encoder (struct intel_encoder *encoder, -const struct intel_crtc_state *crtc_state) +static void intel_configure_pps_for_dsc_encoder (const struct intel_crtc_state *crtc_state) {struct intel_crtc *crtc =to_intel_crtc (crtc_state->uapi.crtc); -struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); +struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev);const struct drm_dsc_config *vdsc_cfg = &crtc_state->dp_dsc_cfg;enum pipe pipe = crtc->pipe;enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;@@ -494,6 +493,9 @@ static void intel_configure_pps_for_dsc_encoder(struct intel_encoder *encoder,u8 num_vdsc_instances = (crtc_state->dsc_params.dsc_split) ?2 :1 ;int i =0 ; +if (crtc_state->bigjoiner) + num_vdsc_instances *=2 ; +/* Populate PICTURE_PARAMETER_SET_0 registers */ pps_val =DSC_VER_MAJ | vdsc_cfg->dsc_version_minor << DSC_VER_MIN_SHIFT |@@ -899,74 +901,104 @@ static void intel_dp_write_dsc_pps_sdp(struct intel_encoder *encoder, sizeof(dp_dsc_pps_sdp)); } +static i915_reg_t dss_ctl1_reg (const struct intel_crtc_state *crtc_state) +{ +enum pipe pipe =to_intel_crtc (crtc_state->uapi.crtc)->pipe; + +if (crtc_state->cpu_transcoder ==TRANSCODER_EDP ) +return DSS_CTL1 ; + +return ICL_PIPE_DSS_CTL1 (pipe); +} + +static i915_reg_t dss_ctl2_reg (const struct intel_crtc_state *crtc_state) +{ +enum pipe pipe =to_intel_crtc (crtc_state->uapi.crtc)->pipe; + +if (crtc_state->cpu_transcoder ==TRANSCODER_EDP ) +return DSS_CTL2 ; + +return ICL_PIPE_DSS_CTL2 (pipe); +} +void intel_dsc_enable (struct intel_encoder *encoder,const struct intel_crtc_state *crtc_state) {struct intel_crtc *crtc =to_intel_crtc (crtc_state->uapi.crtc); -struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); -enum pipe pipe = crtc->pipe; -i915_reg_t dss_ctl1_reg, dss_ctl2_reg; +struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev);u32 dss_ctl1_val =0 ;u32 dss_ctl2_val =0 ;if (!crtc_state->dsc_params.compression_enable)return ; -/* Enable Power wells for VDSC/joining */ -intel_display_power_get (dev_priv, -intel_dsc_power_domain (crtc_state)); +intel_configure_pps_for_dsc_encoder (crtc_state); -intel_configure_pps_for_dsc_encoder (encoder, crtc_state); +if (!crtc_state->bigjoiner_slave) +intel_dp_write_dsc_pps_sdp (encoder, crtc_state); -intel_dp_write_dsc_pps_sdp (encoder, crtc_state); - -if (crtc_state->cpu_transcoder ==TRANSCODER_EDP ) { - dss_ctl1_reg =DSS_CTL1 ; - dss_ctl2_reg =DSS_CTL2 ; - }else { - dss_ctl1_reg =ICL_PIPE_DSS_CTL1 (pipe); - dss_ctl2_reg =ICL_PIPE_DSS_CTL2 (pipe); - } dss_ctl2_val |=LEFT_BRANCH_VDSC_ENABLE ;if (crtc_state->dsc_params.dsc_split) { dss_ctl2_val |=RIGHT_BRANCH_VDSC_ENABLE ; dss_ctl1_val |=JOINER_ENABLE ; } -I915_WRITE (dss_ctl1_reg, dss_ctl1_val); -I915_WRITE (dss_ctl2_reg, dss_ctl2_val); +if (crtc_state->bigjoiner) { + dss_ctl1_val |=BIG_JOINER_ENABLE ; +if (!crtc_state->bigjoiner_slave) + dss_ctl1_val |=MASTER_BIG_JOINER_ENABLE ; + } +I915_WRITE (dss_ctl1_reg (crtc_state), dss_ctl1_val); +I915_WRITE (dss_ctl2_reg (crtc_state), dss_ctl2_val); }void intel_dsc_disable (const struct intel_crtc_state *old_crtc_state) {struct intel_crtc *crtc =to_intel_crtc (old_crtc_state->uapi.crtc);struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev); -enum pipe pipe = crtc->pipe; -i915_reg_t dss_ctl1_reg, dss_ctl2_reg; -u32 dss_ctl1_val =0 , dss_ctl2_val =0 ;if (!old_crtc_state->dsc_params.compression_enable)return ; -if (old_crtc_state->cpu_transcoder ==TRANSCODER_EDP ) { - dss_ctl1_reg =DSS_CTL1 ; - dss_ctl2_reg =DSS_CTL2 ; - }else { - dss_ctl1_reg =ICL_PIPE_DSS_CTL1 (pipe); - dss_ctl2_reg =ICL_PIPE_DSS_CTL2 (pipe); +I915_WRITE (dss_ctl1_reg (old_crtc_state),0 ); +I915_WRITE (dss_ctl2_reg (old_crtc_state),0 ); +} + +void intel_dsc_get_config (struct intel_crtc_state *crtc_state) +{ +struct intel_crtc *crtc =to_intel_crtc (crtc_state->uapi.crtc); +struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev); +u32 dss_ctl1_val, dss_ctl2_val; +intel_wakeref_t wakeref; + +if (!intel_crtc_supports_dsc (crtc_state)) +return ; + + wakeref =intel_display_power_get_if_enabled (dev_priv,intel_dsc_power_domain (crtc_state)); +if (!wakeref) +return ; + + dss_ctl1_val =I915_READ (dss_ctl1_reg (crtc_state)); + dss_ctl2_val =I915_READ (dss_ctl2_reg (crtc_state)); +if (dss_ctl2_val &LEFT_BRANCH_VDSC_ENABLE ) + crtc_state->dsc_params.compression_enable = true; + +if ((dss_ctl1_val &JOINER_ENABLE ) && (dss_ctl2_val &RIGHT_BRANCH_VDSC_ENABLE )) + crtc_state->dsc_params.dsc_split = true; +
Quoted 8 lines
Quoted 2 lines
drivers/gpu/drm/i915/display/intel_vdsc.c static void intel_dp_write_dsc_pps_sdp(struct intel_encoder *encoder, · line 989
Quoted 2 lines
drivers/gpu/drm/i915/display/intel_vdsc.c +2
-0+if (dss_ctl1_val &BIG_JOINER_ENABLE ) { + crtc_state->bigjoiner = true;Is
crtc_state->bigjoinersupposed to be set on both master and slave or just on the master? I thought we only set it for the master based on what I see inintel_dp_dsc_compute_config, but this appears to set in on both during readout (my interpretation of bspec #50174 is that bit 29 is set on both master and slave, whereas bit 28 is only set on the master). Should this be testing againstMASTER_BIG_JOINER_ENABLEinstead?
This is correct, we copy the entire crtc_state to the slave, including the bigjoiner flag.
Quoted 63 lines
Matt
Quoted 60 lines
Quoted 50 lines
drivers/gpu/drm/i915/display/intel_vdsc.c +13
-15+ +if (!(dss_ctl1_val &MASTER_BIG_JOINER_ENABLE )) { + crtc_state->bigjoiner_slave = true; +if (!WARN_ON (crtc->pipe ==PIPE_A )) + crtc_state->bigjoiner_linked_crtc = +intel_get_crtc_for_pipe (dev_priv, crtc->pipe -1 ); + }else { +if (!WARN_ON (INTEL_NUM_PIPES (dev_priv) == crtc->pipe +1 )) + crtc_state->bigjoiner_linked_crtc = +intel_get_crtc_for_pipe (dev_priv, crtc->pipe +1 ); + } } - dss_ctl1_val =I915_READ (dss_ctl1_reg); -if (dss_ctl1_val &JOINER_ENABLE ) - dss_ctl1_val &= ~JOINER_ENABLE ; -I915_WRITE (dss_ctl1_reg, dss_ctl1_val); - - dss_ctl2_val =I915_READ (dss_ctl2_reg); -if (dss_ctl2_val &LEFT_BRANCH_VDSC_ENABLE || - dss_ctl2_val &RIGHT_BRANCH_VDSC_ENABLE ) - dss_ctl2_val &= ~(LEFT_BRANCH_VDSC_ENABLE | -RIGHT_BRANCH_VDSC_ENABLE ); -I915_WRITE (dss_ctl2_reg, dss_ctl2_val); - -/* Disable Power wells for VDSC/joining */ -intel_display_power_put_unchecked (dev_priv, -intel_dsc_power_domain (old_crtc_state)); + +intel_display_power_put (dev_priv,intel_dsc_power_domain (crtc_state), wakeref); }drivers/gpu/drm/i915/display/intel_vdsc.h +2
-0@@ -15,6 +15,8 @@ void intel_dsc_enable(struct intel_encoder *encoder,void intel_dsc_disable (const struct intel_crtc_state *crtc_state);int intel_dp_compute_dsc_params (struct intel_dp *intel_dp,struct intel_crtc_state *pipe_config); +void intel_dsc_get_config (struct intel_crtc_state *crtc_state); +enum intel_display_power_domain intel_dsc_power_domain (const struct intel_crtc_state *crtc_state);Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfxSignature · 9 lines
Matt Roper Graphics Software Engineer VTT-OSGC Platform Enablement Intel Corporation (916) 356-2795 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerPATCH 13/23 drm/i915: Make hardware readout work on i915.
In reply to Maarten LankhorstUnfortunately I have no way to test this, but it should be correct if the bios sets up bigjoiner in a sane way.
Skip iterating over bigjoiner slaves, only the master has the state we care about.
Add the width of the bigjoiner slave to the reconstructed fb.
Hide the bigjoiner slave to userspace, and double the mode on bigjoiner master.
And last, disable bigjoiner slave from primary if reconstruction fails.
--- drivers/gpu/drm/i915/display/intel_display.c | 65 +++++++++++++++++++- 1 file changed, 62 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +62 -3
@@ -3177,6 +3177,8 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,struct intel_plane *intel_plane =to_intel_plane (primary);struct intel_plane_state *intel_state =to_intel_plane_state (plane_state); +struct intel_crtc_state *crtc_state = +to_intel_crtc_state (intel_crtc->base.state);struct drm_framebuffer *fb;if (!plane_config->fb)
@@ -3199,7 +3201,7 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,if (c == &intel_crtc->base)continue ; -if (!to_intel_crtc (c)->active) +if (!to_intel_crtc_state (c->state)->uapi.active)continue ; state =to_intel_plane_state (c->primary->state);
@@ -3221,6 +3223,12 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,* pretend the BIOS never had it enabled. */ intel_plane_disable_noatomic (intel_crtc, intel_plane); +if (crtc_state->bigjoiner) { +struct intel_crtc *slave = + crtc_state->bigjoiner_linked_crtc; + +intel_plane_disable_noatomic (slave,to_intel_plane (slave->base.primary)); + }return ;
@@ -9918,6 +9926,7 @@ static void skylake_get_initial_plane_config(struct intel_crtc *crtc, struct intel_initial_plane_config *plane_config) { + struct intel_crtc_state *crtc_state = to_intel_crtc_state(crtc->base.state);struct drm_device *dev = crtc->base.dev;struct drm_i915_private *dev_priv =to_i915 (dev);struct intel_plane *plane =to_intel_plane (crtc->base.primary);
@@ -10021,6 +10030,18 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc, fb->height = ((val >>16 ) &0xffff ) +1 ; fb->width = ((val >>0 ) &0xffff ) +1 ; +/* add bigjoiner slave as well, if the fb stretches both */ +if (crtc_state->bigjoiner) { +enum pipe bigjoiner_pipe = crtc_state->bigjoiner_linked_crtc->pipe; + +if (fb->width == crtc_state->pipe_src_w && + (I915_READ (PLANE_SURF (bigjoiner_pipe, plane_id)) &0xfffff000 ) == plane_config->base) { + val =I915_READ (PLANE_SIZE (crtc_state->bigjoiner_linked_crtc->pipe, plane_id)); + fb->height += ((val >>16 ) &0xfff ) +1 ; + fb->width += ((val >>0 ) &0x1fff ) +1 ; + } + } + val =I915_READ (PLANE_STRIDE (pipe, plane_id)); stride_mult =skl_plane_stride_mult (fb,0 ,DRM_MODE_ROTATE_0 ); fb->pitches[0 ] = (val &0x3ff ) * stride_mult;
@@ -16814,7 +16835,8 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc,/* Adjust the state of the output pipe according to whether we * have active connectors/encoders. */ -if (crtc_state->hw.active && !intel_crtc_has_encoders (crtc)) +if (crtc_state->hw.active && !intel_crtc_has_encoders (crtc) && + !crtc_state->bigjoiner_slave)intel_crtc_disable_noatomic (&crtc->base, ctx);if (crtc_state->hw.active ||HAS_GMCH (dev_priv)) {
@@ -17136,6 +17158,9 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)struct intel_plane *plane;int min_cdclk =0 ; +if (crtc_state->bigjoiner_slave) +continue ; +memset (&crtc->base.mode,0 ,sizeof (crtc->base.mode));if (crtc_state->hw.active) {intel_mode_from_pipe_config (&crtc->base.mode, crtc_state);
@@ -17144,7 +17169,8 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)intel_mode_from_pipe_config (&crtc_state->hw.adjusted_mode, crtc_state); crtc_state->hw.mode = crtc->base.mode; -WARN_ON (drm_atomic_set_mode_for_crtc (crtc->base.state, &crtc->base.mode)); +if (!crtc_state->bigjoiner_slave) +WARN_ON (drm_atomic_set_mode_for_crtc (crtc->base.state, &crtc->base.mode));/* * The initial mode needs to be set in order to keep
@@ -17190,6 +17216,39 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)intel_bw_crtc_update (bw_state, crtc_state);copy_hw_to_uapi_state (crtc_state);intel_pipe_config_sanity_check (dev_priv, crtc_state); + +/* discard our incomplete slave state, copy it from master */ +if (crtc_state->bigjoiner && crtc_state->hw.active) { +struct intel_crtc *slave = crtc_state->bigjoiner_linked_crtc; +struct intel_crtc_state *slave_crtc_state = +to_intel_crtc_state (slave->base.state); + +copy_bigjoiner_crtc_state (slave_crtc_state, crtc_state); + slave->base.mode = crtc->base.mode; + + dev_priv->min_cdclk[slave->pipe] = min_cdclk; + dev_priv->min_voltage_level[slave->pipe] = + crtc_state->min_voltage_level; + +for_each_intel_plane_on_crtc (&dev_priv->drm, slave, plane) { +const struct intel_plane_state *plane_state = +to_intel_plane_state (plane->base.state); + +/* +* FIXME don't have the fb yet, so can't +* use intel_plane_data_rate() :( +*/ +if (plane_state->base.visible) + crtc_state->data_rate[plane->id] = +4 * crtc_state->pixel_rate; +else + crtc_state->data_rate[plane->id] =0 ; + } + +intel_bw_crtc_update (bw_state, slave_crtc_state); +drm_calc_timestamping_constants (&slave->base, + &slave_crtc_state->hw.adjusted_mode); + } } }
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 13/23] drm/i915: Make hardware readout work on i915.
Quoted 62 lines · Maarten Lankhorst
Unfortunately I have no way to test this, but it should be correct if the bios sets up bigjoiner in a sane way.
Skip iterating over bigjoiner slaves, only the master has the state we care about.
Add the width of the bigjoiner slave to the reconstructed fb.
Hide the bigjoiner slave to userspace, and double the mode on bigjoiner master.
And last, disable bigjoiner slave from primary if reconstruction fails.
Signed-off-by Maarten Lankhorst <[email protected]>--- drivers/gpu/drm/i915/display/intel_display.c | 65 +++++++++++++++++++- 1 file changed, 62 insertions(+), 3 deletions(-)drivers/gpu/drm/i915/display/intel_display.c +10
-1@@ -3177,6 +3177,8 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,struct intel_plane *intel_plane =to_intel_plane (primary);struct intel_plane_state *intel_state =to_intel_plane_state (plane_state); +struct intel_crtc_state *crtc_state = +to_intel_crtc_state (intel_crtc->base.state);struct drm_framebuffer *fb;if (!plane_config->fb)@@ -3199,7 +3201,7 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,if (c == &intel_crtc->base)continue ; -if (!to_intel_crtc (c)->active) +if (!to_intel_crtc_state (c->state)->uapi.active)continue ; state =to_intel_plane_state (c->primary->state);@@ -3221,6 +3223,12 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,* pretend the BIOS never had it enabled. */ intel_plane_disable_noatomic (intel_crtc, intel_plane); +if (crtc_state->bigjoiner) { +struct intel_crtc *slave = + crtc_state->bigjoiner_linked_crtc; + +intel_plane_disable_noatomic (slave,to_intel_plane (slave->base.primary)); + }return ;@@ -9918,6 +9926,7 @@ static void skylake_get_initial_plane_config(struct intel_crtc *crtc, struct intel_initial_plane_config *plane_config) { + struct intel_crtc_state *crtc_state = to_intel_crtc_state(crtc->base.state);struct drm_device *dev = crtc->base.dev;struct drm_i915_private *dev_priv =to_i915 (dev);struct intel_plane *plane =to_intel_plane (crtc->base.primary);
drivers/gpu/drm/i915/display/intel_display.c skylake_get_initial_plane_config(struct intel_crtc *crtc, · line 10037
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_display.c +5
-0@@ -10021,6 +10030,18 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc, fb->height = ((val >>16 ) &0xffff ) +1 ; fb->width = ((val >>0 ) &0xffff ) +1 ; +/* add bigjoiner slave as well, if the fb stretches both */ +if (crtc_state->bigjoiner) { +enum pipe bigjoiner_pipe = crtc_state->bigjoiner_linked_crtc->pipe; + + if (fb->width == crtc_state->pipe_src_w &&
I just noticed that we don't seem to readout PLANE_POS or scaler state when the scalers are in plane mode rather than pfit. I guess we haven't found the BIOS to use plane scaling in the past, but I wonder if that might become something we have to worry about in bigjoiner cases? I could definitely imagine BIOS centering a framebuffer in the middle of a panel (so it doesn't cover either pipe completely).
drivers/gpu/drm/i915/display/intel_display.c skylake_get_initial_plane_config(struct intel_crtc *crtc, · line 10040
Quoted 3 lines
drivers/gpu/drm/i915/display/intel_display.c +3
-0+ (I915_READ(PLANE_SURF(bigjoiner_pipe, plane_id)) & 0xfffff000) == plane_config->base) { + val =I915_READ (PLANE_SIZE (crtc_state->bigjoiner_linked_crtc->pipe, plane_id)); + fb->height += ((val >>16 ) &0xfff ) +1 ;
On gen10 and below there were only 12 bits for height, but that bumped up to 13 on gen11 (which are the platforms that have bigjoiner), so this should be 0x1fff like below. Although we should probably just mask with 0xffff to be consistent with the regular height/width readout farther up (the extra bits are MBZ so it should be harmless to include them).
Quoted 28 lines
drivers/gpu/drm/i915/display/intel_display.c +9
-1+ fb->width += ((val >>0 ) &0x1fff ) +1 ; + } + } + val =I915_READ (PLANE_STRIDE (pipe, plane_id)); stride_mult =skl_plane_stride_mult (fb,0 ,DRM_MODE_ROTATE_0 ); fb->pitches[0 ] = (val &0x3ff ) * stride_mult;@@ -16814,7 +16835,8 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc,/* Adjust the state of the output pipe according to whether we * have active connectors/encoders. */ -if (crtc_state->hw.active && !intel_crtc_has_encoders (crtc)) +if (crtc_state->hw.active && !intel_crtc_has_encoders (crtc) && + !crtc_state->bigjoiner_slave)intel_crtc_disable_noatomic (&crtc->base, ctx);if (crtc_state->hw.active ||HAS_GMCH (dev_priv)) {@@ -17136,6 +17158,9 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)struct intel_plane *plane;int min_cdclk =0 ; +if (crtc_state->bigjoiner_slave) +continue ; +memset (&crtc->base.mode,0 ,sizeof (crtc->base.mode));if (crtc_state->hw.active) {intel_mode_from_pipe_config (&crtc->base.mode, crtc_state);
drivers/gpu/drm/i915/display/intel_display.c static void intel_modeset_readout_hw_state(struct drm_device *dev) · line 17172
Quoted 5 lines
drivers/gpu/drm/i915/display/intel_display.c +1
-1@@ -17144,7 +17169,8 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)intel_mode_from_pipe_config (&crtc_state->hw.adjusted_mode, crtc_state); crtc_state->hw.mode = crtc->base.mode; -WARN_ON (drm_atomic_set_mode_for_crtc (crtc->base.state, &crtc->base.mode)); +if (!crtc_state->bigjoiner_slave)
This is always true since we added the 'continue' just above for slave crtc's.
Matt
Quoted 51 lines
drivers/gpu/drm/i915/display/intel_display.c +34
-0+WARN_ON (drm_atomic_set_mode_for_crtc (crtc->base.state, &crtc->base.mode));/* * The initial mode needs to be set in order to keep @@ -17190,6 +17216,39 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)intel_bw_crtc_update (bw_state, crtc_state);copy_hw_to_uapi_state (crtc_state);intel_pipe_config_sanity_check (dev_priv, crtc_state); + +/* discard our incomplete slave state, copy it from master */ +if (crtc_state->bigjoiner && crtc_state->hw.active) { +struct intel_crtc *slave = crtc_state->bigjoiner_linked_crtc; +struct intel_crtc_state *slave_crtc_state = +to_intel_crtc_state (slave->base.state); + +copy_bigjoiner_crtc_state (slave_crtc_state, crtc_state); + slave->base.mode = crtc->base.mode; + + dev_priv->min_cdclk[slave->pipe] = min_cdclk; + dev_priv->min_voltage_level[slave->pipe] = + crtc_state->min_voltage_level; + +for_each_intel_plane_on_crtc (&dev_priv->drm, slave, plane) { +const struct intel_plane_state *plane_state = +to_intel_plane_state (plane->base.state); + +/* +* FIXME don't have the fb yet, so can't +* use intel_plane_data_rate() :( +*/ +if (plane_state->base.visible) + crtc_state->data_rate[plane->id] = +4 * crtc_state->pixel_rate; +else + crtc_state->data_rate[plane->id] =0 ; + } + +intel_bw_crtc_update (bw_state, slave_crtc_state); +drm_calc_timestamping_constants (&slave->base, + &slave_crtc_state->hw.adjusted_mode); + } } }Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 9 lines
Matt Roper Graphics Software Engineer VTT-OSGC Platform Enablement Intel Corporation (916) 356-2795 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerPATCH 14/23 drm/i915: Prepare update_slave() for bigjoiner plane updates
In reply to Maarten LankhorstWe want to program slave planes with the master plane_state for properties such as FB, rotation, coordinates, etc, but the slave plane_state for all programming parameters.
Instead of special casing NV12 Y-planes, we make the code more generic, Y planes are programmed with separate state from the UV plane.
This will allow us to program planes on a bigjoiner slave crtc in a similar way.
This also requires the VMA to be copied to the slave, which is done in prepare_plane_fb().
--- .../gpu/drm/i915/display/intel_atomic_plane.c | 21 +++--- .../gpu/drm/i915/display/intel_atomic_plane.h | 3 - drivers/gpu/drm/i915/display/intel_display.c | 56 ++++++++++++-- drivers/gpu/drm/i915/display/intel_display.h | 3 +- .../drm/i915/display/intel_display_types.h | 6 +- drivers/gpu/drm/i915/display/intel_sprite.c | 75 ++++++++++--------- 6 files changed, 106 insertions(+), 58 deletions(-)
drivers/gpu/drm/i915/display/intel_atomic_plane.c +11 -10
@@ -277,14 +277,15 @@ void intel_update_plane(struct intel_plane *plane, plane->update_plane (plane, crtc_state, plane_state); } -void intel_update_slave (struct intel_plane *plane, -const struct intel_crtc_state *crtc_state, -const struct intel_plane_state *plane_state) +static void intel_update_slave (struct intel_plane *plane, +const struct intel_crtc_state *crtc_state, +const struct intel_plane_state *master_plane_state, +const struct intel_plane_state *slave_plane_state) {struct intel_crtc *crtc =to_intel_crtc (crtc_state->uapi.crtc);trace_intel_update_plane (&plane->base, crtc); - plane->update_slave (plane, crtc_state, plane_state); + plane->update_slave (plane, crtc_state, master_plane_state, slave_plane_state); } void intel_disable_plane(struct intel_plane *plane,
@@ -324,6 +325,8 @@ void skl_update_planes_on_crtc(struct intel_atomic_state *state, }else if (new_plane_state->planar_slave) {struct intel_plane *master = new_plane_state->planar_linked_plane; +struct intel_plane_state *master_plane_state = +intel_atomic_get_new_plane_state (state, master);/* * We update the slave plane from this function because
@@ -331,13 +334,11 @@ void skl_update_planes_on_crtc(struct intel_atomic_state *state,* callback runs into issues when the Y plane is * reassigned, disabled or used by a different plane. * -* The slave plane is updated with the master plane's -* plane_state. +* The slave plane is updated with the master's +* plane_state as extra argument. */ - new_plane_state = -intel_atomic_get_new_plane_state (state, master); - -intel_update_slave (plane, new_crtc_state, new_plane_state); +intel_update_slave (plane, new_crtc_state, + master_plane_state, new_plane_state); }else {intel_disable_plane (plane, new_crtc_state); }
drivers/gpu/drm/i915/display/intel_atomic_plane.h +0 -3
@@ -23,9 +23,6 @@ unsigned int intel_plane_data_rate(const struct intel_crtc_state *crtc_state,void intel_update_plane (struct intel_plane *plane,const struct intel_crtc_state *crtc_state,const struct intel_plane_state *plane_state); -void intel_update_slave (struct intel_plane *plane, -const struct intel_crtc_state *crtc_state, -const struct intel_plane_state *plane_state);void intel_disable_plane (struct intel_plane *plane,const struct intel_crtc_state *crtc_state);struct intel_plane *intel_plane_alloc (void );
drivers/gpu/drm/i915/display/intel_display.c +50 -6
92 lines not on this page · raw message
drivers/gpu/drm/i915/display/intel_display.h +2 -1
@@ -560,7 +560,8 @@ u32 glk_plane_color_ctl_crtc(const struct intel_crtc_state *crtc_state);u32 skl_plane_ctl (const struct intel_crtc_state *crtc_state,const struct intel_plane_state *plane_state);u32 skl_plane_ctl_crtc (const struct intel_crtc_state *crtc_state); -u32 skl_plane_stride (const struct intel_plane_state *plane_state, +u32 skl_plane_stride (const struct intel_plane_state *master_plane_state, +const struct intel_plane_state *plane_state,int plane);int skl_check_plane_surface (struct intel_plane_state *plane_state);int i9xx_check_plane_surface (struct intel_plane_state *plane_state);
drivers/gpu/drm/i915/display/intel_display_types.h +5 -1
@@ -538,6 +538,9 @@ struct intel_plane_state {/* plane color control register */ u32 color_ctl; +/* chroma upsampler control register */ +u32 cus_ctl; +/* * scaler_id * = -1 : not using a scaler
@@ -1097,7 +1100,8 @@ struct intel_plane { const struct intel_plane_state *plane_state);void (*update_slave)(struct intel_plane *plane,const struct intel_crtc_state *crtc_state, -const struct intel_plane_state *plane_state); +const struct intel_plane_state *master_plane_state, +const struct intel_plane_state *slave_plane_state);void (*disable_plane)(struct intel_plane *plane,const struct intel_crtc_state *crtc_state);bool (*get_hw_state)(struct intel_plane *plane,enum pipe *pipe);
drivers/gpu/drm/i915/display/intel_sprite.c +38 -37
146 lines not on this page · raw message
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 14/23] drm/i915: Prepare update_slave() for bigjoiner plane updates
Quoted 8 lines · Maarten Lankhorst
We want to program slave planes with the master
plane_statefor properties such as FB, rotation, coordinates, etc, but the slaveplane_statefor all programming parameters.Instead of special casing NV12 Y-planes, we make the code more generic, Y planes are programmed with separate state from the UV plane.
Quoted 7 lines
This will allow us to program planes on a bigjoiner slave crtc in a similar way.
This also requires the VMA to be copied to the slave, which is done in
prepare_plane_fb().Signed-off-by Maarten Lankhorst <[email protected]>
I'm not super wild about how complicated all the plane stuff is becoming. My hope originally was that we could completely virtualize our planes and handle uapi and hw state independently for both bigjoiner and nv12. I.e., make the underlying hardware planes shared resources that we grab as necessary and setup sort of like how we handle scalers and dpll's and such elsewhere in the driver. Of course that was just my super high-level idea and I haven't gone off and done all the design and implementation you have so I may be completely overlooking problems that would make that kind of design unworkable.
It's an unfortunate outcome of the increasingly-complicated hardware design, but I just worry about how hard it's going to be for us to maintain some of this stuff going forward. I keep confusing myself while reviewing the patches here, so I imagine it will be even harder for someone who isn't specifically focused on bigjoiner and nv12 to unravel and understand the codeflow and state handling that's happening.
When we're all done with this work, I think we're going to need some really extensive kerneldoc updates that lay out the overall flow of how/where various bits of plane programming information get pulled from and at what points in the display update sequence.
Matt
Quoted 377 lines
--- .../gpu/drm/i915/display/intel_atomic_plane.c | 21 +++--- .../gpu/drm/i915/display/intel_atomic_plane.h | 3 - drivers/gpu/drm/i915/display/intel_display.c | 56 ++++++++++++-- drivers/gpu/drm/i915/display/intel_display.h | 3 +- .../drm/i915/display/intel_display_types.h | 6 +- drivers/gpu/drm/i915/display/intel_sprite.c | 75 ++++++++++--------- 6 files changed, 106 insertions(+), 58 deletions(-)drivers/gpu/drm/i915/display/intel_atomic_plane.c +11
-10@@ -277,14 +277,15 @@ void intel_update_plane(struct intel_plane *plane, plane->update_plane (plane, crtc_state, plane_state); } -void intel_update_slave (struct intel_plane *plane, -const struct intel_crtc_state *crtc_state, -const struct intel_plane_state *plane_state) +static void intel_update_slave (struct intel_plane *plane, +const struct intel_crtc_state *crtc_state, +const struct intel_plane_state *master_plane_state, +const struct intel_plane_state *slave_plane_state) {struct intel_crtc *crtc =to_intel_crtc (crtc_state->uapi.crtc);trace_intel_update_plane (&plane->base, crtc); - plane->update_slave (plane, crtc_state, plane_state); + plane->update_slave (plane, crtc_state, master_plane_state, slave_plane_state); } void intel_disable_plane(struct intel_plane *plane,@@ -324,6 +325,8 @@ void skl_update_planes_on_crtc(struct intel_atomic_state *state, }else if (new_plane_state->planar_slave) {struct intel_plane *master = new_plane_state->planar_linked_plane; +struct intel_plane_state *master_plane_state = +intel_atomic_get_new_plane_state (state, master);/* * We update the slave plane from this function because @@ -331,13 +334,11 @@ void skl_update_planes_on_crtc(struct intel_atomic_state *state,* callback runs into issues when the Y plane is * reassigned, disabled or used by a different plane. * -* The slave plane is updated with the master plane's -* plane_state. +* The slave plane is updated with the master's +* plane_state as extra argument. */ - new_plane_state = -intel_atomic_get_new_plane_state (state, master); - -intel_update_slave (plane, new_crtc_state, new_plane_state); +intel_update_slave (plane, new_crtc_state, + master_plane_state, new_plane_state); }else {intel_disable_plane (plane, new_crtc_state); }drivers/gpu/drm/i915/display/intel_atomic_plane.h +0
-3@@ -23,9 +23,6 @@ unsigned int intel_plane_data_rate(const struct intel_crtc_state *crtc_state,void intel_update_plane (struct intel_plane *plane,const struct intel_crtc_state *crtc_state,const struct intel_plane_state *plane_state); -void intel_update_slave (struct intel_plane *plane, -const struct intel_crtc_state *crtc_state, -const struct intel_plane_state *plane_state);void intel_disable_plane (struct intel_plane *plane,const struct intel_crtc_state *crtc_state);struct intel_plane *intel_plane_alloc (void );drivers/gpu/drm/i915/display/intel_display.c +50
-6@@ -3972,11 +3972,12 @@ static unsigned int skl_plane_stride_mult(const struct drm_framebuffer *fb,return intel_tile_width_bytes (fb, color_plane); } -u32 skl_plane_stride (const struct intel_plane_state *plane_state, +u32 skl_plane_stride (const struct intel_plane_state *master_plane_state, +const struct intel_plane_state *plane_state,int color_plane) { -const struct drm_framebuffer *fb = plane_state->base.fb; -unsigned int rotation = plane_state->base.rotation; +const struct drm_framebuffer *fb = master_plane_state->base.fb; +unsigned int rotation = master_plane_state->base.rotation;u32 stride = plane_state->color_plane[color_plane].stride;if (color_plane >= fb->format->num_planes)@@ -11900,6 +11901,23 @@ static int icl_check_nv12_planes(struct intel_crtc_state *crtc_state) crtc_state->active_planes |=BIT (linked->id); crtc_state->update_planes |=BIT (linked->id);DRM_DEBUG_KMS ("Using %s as Y plane for %s\n" , linked->base.name, plane->base.name); + +/* Copy parameters to slave plane */ + linked_state->ctl = plane_state->ctl |PLANE_CTL_YUV420_Y_PLANE ; + linked_state->color_ctl = plane_state->color_ctl; + linked_state->color_plane[0 ] = plane_state->color_plane[0 ]; + + linked_state->base.src = plane_state->base.src; + linked_state->base.dst = plane_state->base.dst; + +if (icl_is_hdr_plane (dev_priv, plane->id)) { +if (linked->id ==PLANE_SPRITE5 ) + plane_state->cus_ctl |=PLANE_CUS_PLANE_7 ; +else if (linked->id ==PLANE_SPRITE4 ) + plane_state->cus_ctl |=PLANE_CUS_PLANE_6 ; +else +MISSING_CASE (linked->id); + } }return 0 ;@@ -14782,6 +14800,23 @@ intel_prepare_plane_fb(struct drm_plane *plane,return ret; } +if (to_intel_plane_state (new_state)->planar_slave) { +struct intel_plane_state *new_plane_state =to_intel_plane_state (new_state); +const struct intel_plane_state *linked_plane_state = +intel_atomic_get_new_plane_state (intel_state, new_plane_state->planar_linked_plane); + +/* +* We are a planar slave, VMA is on our planar master, +* but may not be the same as the bigjoiner master plane. +* +* Copy the vma from our planar master and return. +*/ +if (linked_plane_state->vma) + new_plane_state->vma = +i915_vma_get (linked_plane_state->vma); +return 0 ; + } +if (!obj)return 0 ;@@ -14851,10 +14886,11 @@ intel_prepare_plane_fb(struct drm_plane *plane,*/ void intel_cleanup_plane_fb (struct drm_plane *plane, -struct drm_plane_state *old_state) +struct drm_plane_state *_old_state) { +struct intel_plane_state *old_state =to_intel_plane_state (_old_state);struct intel_atomic_state *intel_state = -to_intel_atomic_state (old_state->state); +to_intel_atomic_state (old_state->base.state);struct drm_i915_private *dev_priv =to_i915 (plane->dev);if (intel_state->rps_interactive) {@@ -14862,9 +14898,17 @@ intel_cleanup_plane_fb(struct drm_plane *plane, intel_state->rps_interactive = false; } +/* pin is handled in master plane_state for planar formats */ +if (old_state->planar_slave) { +if (old_state->vma) +i915_vma_put (old_state->vma); + old_state->vma =NULL ; +return ; + } +/* Should only be called after a successful intel_prepare_plane_fb()! */ mutex_lock (&dev_priv->drm.struct_mutex); -intel_plane_unpin_fb (to_intel_plane_state (old_state)); +intel_plane_unpin_fb (old_state);mutex_unlock (&dev_priv->drm.struct_mutex); }drivers/gpu/drm/i915/display/intel_display.h +2
-1@@ -560,7 +560,8 @@ u32 glk_plane_color_ctl_crtc(const struct intel_crtc_state *crtc_state);u32 skl_plane_ctl (const struct intel_crtc_state *crtc_state,const struct intel_plane_state *plane_state);u32 skl_plane_ctl_crtc (const struct intel_crtc_state *crtc_state); -u32 skl_plane_stride (const struct intel_plane_state *plane_state, +u32 skl_plane_stride (const struct intel_plane_state *master_plane_state, +const struct intel_plane_state *plane_state,int plane);int skl_check_plane_surface (struct intel_plane_state *plane_state);int i9xx_check_plane_surface (struct intel_plane_state *plane_state);drivers/gpu/drm/i915/display/intel_display_types.h +5
-1@@ -538,6 +538,9 @@ struct intel_plane_state {/* plane color control register */ u32 color_ctl; +/* chroma upsampler control register */ +u32 cus_ctl; +/* * scaler_id * = -1 : not using a scaler @@ -1097,7 +1100,8 @@ struct intel_plane { const struct intel_plane_state *plane_state);void (*update_slave)(struct intel_plane *plane,const struct intel_crtc_state *crtc_state, -const struct intel_plane_state *plane_state); +const struct intel_plane_state *master_plane_state, +const struct intel_plane_state *slave_plane_state);void (*disable_plane)(struct intel_plane *plane,const struct intel_crtc_state *crtc_state);bool (*get_hw_state)(struct intel_plane *plane,enum pipe *pipe);drivers/gpu/drm/i915/display/intel_sprite.c +38
-37@@ -346,10 +346,11 @@ skl_plane_max_stride(struct intel_plane *plane,static void skl_program_scaler (struct intel_plane *plane,const struct intel_crtc_state *crtc_state, +const struct intel_plane_state *master_plane_state,const struct intel_plane_state *plane_state) {struct drm_i915_private *dev_priv =to_i915 (plane->base.dev); -const struct drm_framebuffer *fb = plane_state->base.fb; +const struct drm_framebuffer *fb = master_plane_state->base.fb;enum pipe pipe = plane->pipe;int scaler_id = plane_state->scaler_id; const struct intel_scaler *scaler =@@ -527,28 +528,29 @@ icl_program_input_csc(struct intel_plane *plane,static void skl_program_plane (struct intel_plane *plane,const struct intel_crtc_state *crtc_state, +const struct intel_plane_state *master_plane_state,const struct intel_plane_state *plane_state, -int color_plane,bool slave,u32 plane_ctl) +int color_plane) {struct drm_i915_private *dev_priv =to_i915 (plane->base.dev);enum plane_id plane_id = plane->id;enum pipe pipe = plane->pipe; -const struct drm_intel_sprite_colorkey *key = &plane_state->ckey; +const struct drm_intel_sprite_colorkey *key = &master_plane_state->ckey;u32 surf_addr = plane_state->color_plane[color_plane].offset; -u32 stride =skl_plane_stride (plane_state, color_plane); -u32 aux_stride =skl_plane_stride (plane_state,1 ); +u32 stride =skl_plane_stride (master_plane_state, plane_state, color_plane); +u32 aux_stride =skl_plane_stride (master_plane_state, plane_state,1 );int crtc_x = plane_state->base.dst.x1;int crtc_y = plane_state->base.dst.y1;u32 x = plane_state->color_plane[color_plane].x;u32 y = plane_state->color_plane[color_plane].y;u32 src_w =drm_rect_width (&plane_state->base.src) >>16 ;u32 src_h =drm_rect_height (&plane_state->base.src) >>16 ; -struct intel_plane *linked = plane_state->planar_linked_plane; -const struct drm_framebuffer *fb = plane_state->base.fb; -u8 alpha = plane_state->base.alpha >>8 ; +const struct drm_framebuffer *fb = master_plane_state->base.fb; +u8 alpha = master_plane_state->base.alpha >>8 ;u32 plane_color_ctl =0 ;unsigned long irqflags;u32 keymsk, keymax; +u32 plane_ctl = plane_state->ctl; plane_ctl |=skl_plane_ctl_crtc (crtc_state);@@ -580,32 +582,14 @@ skl_program_plane(struct intel_plane *plane,I915_WRITE_FW (PLANE_AUX_DIST (pipe, plane_id), (plane_state->color_plane[1 ].offset - surf_addr) | aux_stride); -if (icl_is_hdr_plane (dev_priv, plane_id)) { -u32 cus_ctl =0 ; - -if (linked) { -/* Enable and use MPEG-2 chroma siting */ - cus_ctl =PLANE_CUS_ENABLE | -PLANE_CUS_HPHASE_0 | -PLANE_CUS_VPHASE_SIGN_NEGATIVE | -PLANE_CUS_VPHASE_0_25 ; - -if (linked->id ==PLANE_SPRITE5 ) - cus_ctl |=PLANE_CUS_PLANE_7 ; -else if (linked->id ==PLANE_SPRITE4 ) - cus_ctl |=PLANE_CUS_PLANE_6 ; -else -MISSING_CASE (linked->id); - } - -I915_WRITE_FW (PLANE_CUS_CTL (pipe, plane_id), cus_ctl); - } +if (icl_is_hdr_plane (dev_priv, plane_id)) +I915_WRITE_FW (PLANE_CUS_CTL (pipe, plane_id), plane_state->cus_ctl);if (INTEL_GEN (dev_priv) >=10 ||IS_GEMINILAKE (dev_priv))I915_WRITE_FW (PLANE_COLOR_CTL (pipe, plane_id), plane_color_ctl);if (fb->format->is_yuv &&icl_is_hdr_plane (dev_priv, plane_id)) -icl_program_input_csc (plane, crtc_state, plane_state); +icl_program_input_csc (plane, crtc_state, master_plane_state);skl_write_plane_wm (plane, crtc_state);@@ -629,8 +613,8 @@ skl_program_plane(struct intel_plane *plane,I915_WRITE_FW (PLANE_SURF (pipe, plane_id),intel_plane_ggtt_offset (plane_state) + surf_addr); -if (!slave && plane_state->scaler_id >=0 ) -skl_program_scaler (plane, crtc_state, plane_state); +if (plane_state->scaler_id >=0 ) +skl_program_scaler (plane, crtc_state, master_plane_state, plane_state);spin_unlock_irqrestore (&dev_priv->uncore.lock, irqflags); }@@ -647,17 +631,26 @@ skl_update_plane(struct intel_plane *plane, color_plane =1 ; } -skl_program_plane (plane, crtc_state, plane_state, - color_plane, false, plane_state->ctl); +skl_program_plane (plane, crtc_state, plane_state, plane_state, color_plane); }static void icl_update_slave (struct intel_plane *plane,const struct intel_crtc_state *crtc_state, -const struct intel_plane_state *plane_state) +const struct intel_plane_state *master_plane_state, +const struct intel_plane_state *slave_plane_state) { -skl_program_plane (plane, crtc_state, plane_state,0 , true, - plane_state->ctl |PLANE_CTL_YUV420_Y_PLANE ); +const struct drm_framebuffer *fb = master_plane_state->base.fb; +int color_plane =0 ; + +if (drm_format_info_is_yuv_semiplanar (fb->format) && + !slave_plane_state->planar_slave) { +/* Program the UV plane, even as slave (Big joiner). */ + color_plane =1 ; + } + +skl_program_plane (plane, crtc_state, master_plane_state, + slave_plane_state, color_plane); } static void@@ -1845,6 +1838,14 @@ static int skl_plane_check(struct intel_crtc_state *crtc_state, plane_state->color_ctl =glk_plane_color_ctl (crtc_state, plane_state); +if (icl_is_hdr_plane (dev_priv, plane->id) && fb->format->is_yuv) +/* Enable and use MPEG-2 chroma siting */ + plane_state->cus_ctl =PLANE_CUS_ENABLE | +PLANE_CUS_HPHASE_0 | +PLANE_CUS_VPHASE_SIGN_NEGATIVE |PLANE_CUS_VPHASE_0_25 ; +else + plane_state->cus_ctl =0 ; +return 0 ; }@@ -2513,7 +2514,7 @@ skl_universal_plane_create(struct drm_i915_private *dev_priv, plane->disable_plane = skl_disable_plane; plane->get_hw_state = skl_plane_get_hw_state; plane->check_plane = skl_plane_check; -if (icl_is_nv12_y_plane (plane_id)) +if (INTEL_GEN (dev_priv) >=11 ) plane->update_slave = icl_update_slave;if (INTEL_GEN (dev_priv) >=11 )Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 9 lines
Matt Roper Graphics Software Engineer VTT-OSGC Platform Enablement Intel Corporation (916) 356-2795 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerPATCH 15/23 drm/i915: Link planes in a bigjoiner configuration.
In reply to Maarten LankhorstMake sure that when a plane is set in a bigjoiner mode, we will add their counterpart to the atomic state as well. This will allow us to make sure all state is available when planes are checked.
Because of the funny interactions with bigjoiner and planar YUV formats, we may end up adding a lot of planes, so we have to keep iterating until we no longer add any planes.
--- .../gpu/drm/i915/display/intel_atomic_plane.c | 31 +++- .../gpu/drm/i915/display/intel_atomic_plane.h | 4 + drivers/gpu/drm/i915/display/intel_display.c | 142 ++++++++++++++++-- .../drm/i915/display/intel_display_types.h | 11 ++ 4 files changed, 172 insertions(+), 16 deletions(-)
drivers/gpu/drm/i915/display/intel_atomic_plane.c +26 -5
@@ -182,16 +182,36 @@ int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_ old_plane_state, new_plane_state); } -static struct intel_crtc * -get_crtc_from_states (const struct intel_plane_state *old_plane_state, -const struct intel_plane_state *new_plane_state) -{ +struct intel_crtc * +intel_plane_get_crtc_from_states (struct intel_atomic_state *state, +const struct intel_plane_state *old_plane_state, +const struct intel_plane_state *new_plane_state) + { +struct drm_i915_private *dev_priv =to_i915 (state->base.dev); +struct intel_plane *plane =to_intel_plane (new_plane_state->base.plane); +if (new_plane_state->base.crtc)return to_intel_crtc (new_plane_state->base.crtc);if (old_plane_state->base.crtc)return to_intel_crtc (old_plane_state->base.crtc); +if (new_plane_state->bigjoiner_slave) { +const struct intel_plane_state *new_master_plane_state = +intel_atomic_get_new_plane_state (state, new_plane_state->bigjoiner_plane); + +if (new_master_plane_state->base.crtc) +return intel_get_crtc_for_pipe (dev_priv, plane->pipe); + } + +if (old_plane_state->bigjoiner_slave) { +const struct intel_plane_state *old_master_plane_state = +intel_atomic_get_old_plane_state (state, old_plane_state->bigjoiner_plane); + +if (old_master_plane_state->base.crtc) +return intel_get_crtc_for_pipe (dev_priv, plane->pipe); + } +return NULL ; }
@@ -206,7 +226,8 @@ static int intel_plane_atomic_check(struct drm_plane *_plane,const struct intel_plane_state *old_plane_state =intel_atomic_get_old_plane_state (state, plane);struct intel_crtc *crtc = -get_crtc_from_states (old_plane_state, new_plane_state); +intel_plane_get_crtc_from_states (state, old_plane_state, + new_plane_state);const struct intel_crtc_state *old_crtc_state;struct intel_crtc_state *new_crtc_state;
drivers/gpu/drm/i915/display/intel_atomic_plane.h +4 -0
@@ -42,5 +42,9 @@ int intel_plane_atomic_calc_changes(const struct intel_crtc_state *old_crtc_statstruct intel_crtc_state *crtc_state, const struct intel_plane_state *old_plane_state, struct intel_plane_state *plane_state); +struct intel_crtc * +intel_plane_get_crtc_from_states (struct intel_atomic_state *state, +const struct intel_plane_state *old_plane_state, +const struct intel_plane_state *new_plane_state);#endif /* __INTEL_ATOMIC_PLANE_H__ */
drivers/gpu/drm/i915/display/intel_display.c +131 -11
167 lines not on this page · raw message
drivers/gpu/drm/i915/display/intel_display_types.h +11 -0
@@ -571,6 +571,17 @@ struct intel_plane_state {*/ struct intel_plane *planar_linked_plane; +/* +* bigjoiner_plane: +* +* When 2 pipes are joined in a bigjoiner configuration, +* points to the same plane on the other pipe. +* +* bigjoiner_slave is set on the slave pipe. +*/ +struct intel_plane *bigjoiner_plane; +u32 bigjoiner_slave; +/* * planar_slave: * If set don't update use the linked plane's state for updating
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 15/23] drm/i915: Link planes in a bigjoiner configuration.
Quoted 21 lines · Maarten Lankhorst
Make sure that when a plane is set in a bigjoiner mode, we will add their counterpart to the atomic state as well. This will allow us to make sure all state is available when planes are checked.
Because of the funny interactions with bigjoiner and planar YUV formats, we may end up adding a lot of planes, so we have to keep iterating until we no longer add any planes.
Signed-off-by Maarten Lankhorst <[email protected]>--- .../gpu/drm/i915/display/intel_atomic_plane.c | 31 +++- .../gpu/drm/i915/display/intel_atomic_plane.h | 4 + drivers/gpu/drm/i915/display/intel_display.c | 142 ++++++++++++++++-- .../drm/i915/display/intel_display_types.h | 11 ++ 4 files changed, 172 insertions(+), 16 deletions(-)drivers/gpu/drm/i915/display/intel_atomic_plane.c +0
-0
drivers/gpu/drm/i915/display/intel_atomic_plane.c int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_ · line 186
Quoted 9 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c +2
-4@@ -182,16 +182,36 @@ int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_ old_plane_state, new_plane_state); } -static struct intel_crtc * -get_crtc_from_states (const struct intel_plane_state *old_plane_state, -const struct intel_plane_state *new_plane_state) -{ +struct intel_crtc * +intel_plane_get_crtc_from_states(struct intel_atomic_state *state,
This function name seems ambiguous now since it isn't clear whether we're getting the plane's hardware CRTC or its uapi CRTC. Maybe call it something like intel_plane_state_get_uapi_crtc()?
Quoted 9 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c +6
-0+const struct intel_plane_state *old_plane_state, + const struct intel_plane_state *new_plane_state) + { + struct drm_i915_private *dev_priv = to_i915(state->base.dev); +struct intel_plane *plane =to_intel_plane (new_plane_state->base.plane); +if (new_plane_state->base.crtc)return to_intel_crtc (new_plane_state->base.crtc);
drivers/gpu/drm/i915/display/intel_atomic_plane.c int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_ · line 205
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c +7
-0if (old_plane_state->base.crtc)return to_intel_crtc (old_plane_state->base.crtc); +if (new_plane_state->bigjoiner_slave) { +const struct intel_plane_state *new_master_plane_state = +intel_atomic_get_new_plane_state (state, new_plane_state->bigjoiner_plane); + +if (new_master_plane_state->base.crtc) +return intel_get_crtc_for_pipe (dev_priv, plane->pipe); + }
Will this cause problems if we adjust properties of planes on a a uapi-disabled CRTC? E.g., I believe userspace can fiddle with stuff like rotation properties on disabled planes/crtcs and now I believe that causes us to needlessly pull in the bigjoiner master crtc and corresponding plane?
Quoted 196 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c +11
-1+ +if (old_plane_state->bigjoiner_slave) { +const struct intel_plane_state *old_master_plane_state = +intel_atomic_get_old_plane_state (state, old_plane_state->bigjoiner_plane); + +if (old_master_plane_state->base.crtc) +return intel_get_crtc_for_pipe (dev_priv, plane->pipe); + } +return NULL ; }@@ -206,7 +226,8 @@ static int intel_plane_atomic_check(struct drm_plane *_plane,const struct intel_plane_state *old_plane_state =intel_atomic_get_old_plane_state (state, plane);struct intel_crtc *crtc = -get_crtc_from_states (old_plane_state, new_plane_state); +intel_plane_get_crtc_from_states (state, old_plane_state, + new_plane_state);const struct intel_crtc_state *old_crtc_state;struct intel_crtc_state *new_crtc_state;drivers/gpu/drm/i915/display/intel_atomic_plane.h +4
-0@@ -42,5 +42,9 @@ int intel_plane_atomic_calc_changes(const struct intel_crtc_state *old_crtc_statstruct intel_crtc_state *crtc_state, const struct intel_plane_state *old_plane_state, struct intel_plane_state *plane_state); +struct intel_crtc * +intel_plane_get_crtc_from_states (struct intel_atomic_state *state, +const struct intel_plane_state *old_plane_state, +const struct intel_plane_state *new_plane_state);#endif /* __INTEL_ATOMIC_PLANE_H__ */ drivers/gpu/drm/i915/display/intel_display.c +120
-11@@ -11811,24 +11811,101 @@ static bool check_single_encoder_cloning(struct drm_atomic_state *state,return true; } +static int icl_add_dependent_planes (struct intel_atomic_state *state, +struct intel_plane_state *plane_state) +{ +struct intel_plane_state *new_plane_state; +struct intel_plane *plane; +int ret =0 ; + + plane = plane_state->bigjoiner_plane; +if (plane && !intel_atomic_get_new_plane_state (state, plane)) { + new_plane_state =intel_atomic_get_plane_state (state, plane); +if (IS_ERR (new_plane_state)) +return PTR_ERR (new_plane_state); + + ret =1 ; + } + + plane = plane_state->planar_linked_plane; +if (plane && !intel_atomic_get_new_plane_state (state, plane)) { + new_plane_state =intel_atomic_get_plane_state (state, plane); +if (IS_ERR (new_plane_state)) +return PTR_ERR (new_plane_state); + + ret =1 ; + } + +return ret; +} +static int icl_add_linked_planes (struct intel_atomic_state *state) { -struct intel_plane *plane, *linked; -struct intel_plane_state *plane_state, *linked_plane_state; +struct intel_plane *plane; +struct intel_plane_state *old_plane_state, *new_plane_state; +struct intel_crtc *crtc, *linked_crtc; +struct intel_crtc_state *old_crtc_state, *new_crtc_state, *linked_crtc_state; +bool added;int i; -for_each_new_intel_plane_in_state (state, plane, plane_state, i) { - linked = plane_state->planar_linked_plane; +/* +* Iteratively add plane_state->linked_plane and plane_state->bigjoiner_plane +* +* This needs to be done repeatedly, because of is a funny interaction; +* the Y-plane may be assigned differently on the other bigjoiner crtc, +* and we could end up with the following evil recursion, when only adding a +* single plane to state: +* +* XRGB8888 master plane 6 adds NV12 slave Y-plane 6, which adds slave UV plane 0, +* which adds master UV plane 0, which adds master Y-plane 7, which adds XRGB8888 +* slave plane 7. +* +* We could pull in even more because of old_plane_state vs new_plane_state. +* +* Max depth = 5 (or 7 for evil case) in this case. +* Number of passes will be less, because newly added planes show up in the +* same iteration round when added_plane->index > plane->index. +*/ +do { + added = false; -if (!linked) -continue ; +for_each_oldnew_intel_plane_in_state (state, plane, old_plane_state, new_plane_state, i) { +int ret, ret2; + + ret =icl_add_dependent_planes (state, old_plane_state); +if (ret <0 ) +return ret; + + ret2 =icl_add_dependent_planes (state, new_plane_state); +if (ret2 <0 ) +return ret2; - linked_plane_state =intel_atomic_get_plane_state (state, linked); -if (IS_ERR (linked_plane_state)) -return PTR_ERR (linked_plane_state); + added |= ret || ret2; + } + }while (added); + +/* +* Make sure bigjoiner slave crtc's are also pulled in. This is not done automatically +* when adding slave planes, because plane_state->crtc is null. +*/ +for_each_oldnew_intel_crtc_in_state (state, crtc, old_crtc_state, new_crtc_state, i) { + linked_crtc = old_crtc_state->bigjoiner_linked_crtc; +if (linked_crtc) { + linked_crtc_state = +intel_atomic_get_crtc_state (&state->base, linked_crtc); + +if (IS_ERR (linked_crtc_state)) +return PTR_ERR (linked_crtc_state); + } + + linked_crtc = new_crtc_state->bigjoiner_linked_crtc; +if (linked_crtc && linked_crtc != old_crtc_state->bigjoiner_linked_crtc) { + linked_crtc_state = +intel_atomic_get_crtc_state (&state->base, linked_crtc); -WARN_ON (linked_plane_state->planar_linked_plane != plane); -WARN_ON (linked_plane_state->planar_slave == plane_state->planar_slave); +if (IS_ERR (linked_crtc_state)) +return PTR_ERR (linked_crtc_state); + } }return 0 ;@@ -13799,6 +13876,7 @@ static int intel_atomic_check_bigjoiner(struct intel_atomic_state *state)struct drm_i915_private *dev_priv =to_i915 (state->base.dev);struct intel_crtc_state *old_crtc_state, *new_crtc_state, *slave_crtc_state, *master_crtc_state;struct intel_crtc *crtc, *slave, *master; +struct intel_plane *plane;int i, ret =0 ;if (INTEL_GEN (dev_priv) <11 )@@ -13894,6 +13972,48 @@ static int intel_atomic_check_bigjoiner(struct intel_atomic_state *state)return ret; } +/* +* Setup and teardown the new bigjoiner plane mappings. +*/ +for_each_intel_plane (&dev_priv->drm, plane) { +struct intel_plane_state *plane_state; +struct intel_plane *other_plane =NULL ; + + crtc =intel_get_crtc_for_pipe (dev_priv, plane->pipe); + old_crtc_state =intel_atomic_get_old_crtc_state (state, crtc); + new_crtc_state =intel_atomic_get_new_crtc_state (state, crtc); + +if (!new_crtc_state || !needs_modeset (new_crtc_state)) +continue ; + +if (new_crtc_state->bigjoiner) { +struct intel_crtc *other_crtc = + new_crtc_state->bigjoiner_linked_crtc; +bool found = false; + +for_each_intel_plane_on_crtc (&dev_priv->drm, other_crtc, other_plane) { +if (other_plane->id != plane->id) +continue ; + + found = true; +break ; + } + +/* All pipes should have identical planes. */ +if (WARN_ON (!found)) +return -EINVAL ; + }else if (!old_crtc_state->bigjoiner) {
drivers/gpu/drm/i915/display/intel_display.c static int intel_atomic_check_bigjoiner(struct intel_atomic_state *state) · line 14015
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +10
-0+continue ; + } + + plane_state =intel_atomic_get_plane_state (state, plane); +if (IS_ERR (plane_state)) +return PTR_ERR (plane_state); + + plane_state->bigjoiner_plane = other_plane; + plane_state->bigjoiner_slave = new_crtc_state->bigjoiner_slave; + }
Is my understanding correct that we always grab the corresponding plane on the other CRTC when the big joiner is active? I.e., even in cases where the uapi plane is restricted to just one half of the screen, we're still going to grab the bigjoiner slave plane? I guess trying to restrict this to only cases where the uapi plane covers both pipes would make this whole thing even more complicated.
Matt
Quoted 33 lines
drivers/gpu/drm/i915/display/intel_display.c +1
-0+return 0 ; }drivers/gpu/drm/i915/display/intel_display_types.h +11
-0@@ -571,6 +571,17 @@ struct intel_plane_state {*/ struct intel_plane *planar_linked_plane; +/* +* bigjoiner_plane: +* +* When 2 pipes are joined in a bigjoiner configuration, +* points to the same plane on the other pipe. +* +* bigjoiner_slave is set on the slave pipe. +*/ +struct intel_plane *bigjoiner_plane; +u32 bigjoiner_slave; +/* * planar_slave: * If set don't update use the linked plane's state for updating Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 9 lines
Matt Roper Graphics Software Engineer VTT-OSGC Platform Enablement Intel Corporation (916) 356-2795 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 15/23] drm/i915: Link planes in a bigjoiner configuration.
Quoted 25 lines · Matt Roper
Quoted 24 lines · Maarten Lankhorst
Make sure that when a plane is set in a bigjoiner mode, we will add their counterpart to the atomic state as well. This will allow us to make sure all state is available when planes are checked.
Because of the funny interactions with bigjoiner and planar YUV formats, we may end up adding a lot of planes, so we have to keep iterating until we no longer add any planes.
Signed-off-by Maarten Lankhorst <[email protected]>--- .../gpu/drm/i915/display/intel_atomic_plane.c | 31 +++- .../gpu/drm/i915/display/intel_atomic_plane.h | 4 + drivers/gpu/drm/i915/display/intel_display.c | 142 ++++++++++++++++-- .../drm/i915/display/intel_display_types.h | 11 ++ 4 files changed, 172 insertions(+), 16 deletions(-)drivers/gpu/drm/i915/display/intel_atomic_plane.c +0
-0@@ -182,16 +182,36 @@ int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_ old_plane_state, new_plane_state); }
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_ · line 186
Quoted 6 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c +2
-4-static struct intel_crtc * -get_crtc_from_states (const struct intel_plane_state *old_plane_state, -const struct intel_plane_state *new_plane_state) -{ +struct intel_crtc * +intel_plane_get_crtc_from_states(struct intel_atomic_state *state,This function name seems ambiguous now since it isn't clear whether we're getting the plane's hardware CRTC or its uapi CRTC. Maybe call it something like
intel_plane_state_get_uapi_crtc()?
I was actually wondering if we shouldn't just do get_crtc(plane->pipe) here. We still don't expose any planes that can switch pipes so feels like this stuff is unecessary complexity we don't particularly need.
Quoted 15 lines
Quoted 15 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c +6
-0+const struct intel_plane_state *old_plane_state, + const struct intel_plane_state *new_plane_state) + { + struct drm_i915_private *dev_priv = to_i915(state->base.dev); +struct intel_plane *plane =to_intel_plane (new_plane_state->base.plane); +if (new_plane_state->base.crtc)return to_intel_crtc (new_plane_state->base.crtc);if (old_plane_state->base.crtc)return to_intel_crtc (old_plane_state->base.crtc);
Quoted 13 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_ · line 205
Quoted 7 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c +7
-0+if (new_plane_state->bigjoiner_slave) { +const struct intel_plane_state *new_master_plane_state = +intel_atomic_get_new_plane_state (state, new_plane_state->bigjoiner_plane); + +if (new_master_plane_state->base.crtc) +return intel_get_crtc_for_pipe (dev_priv, plane->pipe); + }Will this cause problems if we adjust properties of planes on a a uapi-disabled CRTC? E.g., I believe userspace can fiddle with stuff like rotation properties on disabled planes/crtcs and now I believe that causes us to needlessly pull in the bigjoiner master crtc and corresponding plane?
Not sure it's worth the effort to really try to avoid such things. If userspace keeps fiddling with disabled stuff all the time it feels a bit broken to me.
On a semi-related note I've occasionally pondered about trying to filter out nop commits which don't send out events, even on active planes/crtcs. But I guess that's already starting to be a change to the semantics so probably not something that could be done without a new flag/etc.
Quoted 120 lines
Quoted 120 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c +11
-1+ +if (old_plane_state->bigjoiner_slave) { +const struct intel_plane_state *old_master_plane_state = +intel_atomic_get_old_plane_state (state, old_plane_state->bigjoiner_plane); + +if (old_master_plane_state->base.crtc) +return intel_get_crtc_for_pipe (dev_priv, plane->pipe); + } +return NULL ; }@@ -206,7 +226,8 @@ static int intel_plane_atomic_check(struct drm_plane *_plane,const struct intel_plane_state *old_plane_state =intel_atomic_get_old_plane_state (state, plane);struct intel_crtc *crtc = -get_crtc_from_states (old_plane_state, new_plane_state); +intel_plane_get_crtc_from_states (state, old_plane_state, + new_plane_state);const struct intel_crtc_state *old_crtc_state;struct intel_crtc_state *new_crtc_state;drivers/gpu/drm/i915/display/intel_atomic_plane.h +4
-0@@ -42,5 +42,9 @@ int intel_plane_atomic_calc_changes(const struct intel_crtc_state *old_crtc_statstruct intel_crtc_state *crtc_state, const struct intel_plane_state *old_plane_state, struct intel_plane_state *plane_state); +struct intel_crtc * +intel_plane_get_crtc_from_states (struct intel_atomic_state *state, +const struct intel_plane_state *old_plane_state, +const struct intel_plane_state *new_plane_state);#endif /* __INTEL_ATOMIC_PLANE_H__ */ drivers/gpu/drm/i915/display/intel_display.c +63
-6@@ -11811,24 +11811,101 @@ static bool check_single_encoder_cloning(struct drm_atomic_state *state,return true; } +static int icl_add_dependent_planes (struct intel_atomic_state *state, +struct intel_plane_state *plane_state) +{ +struct intel_plane_state *new_plane_state; +struct intel_plane *plane; +int ret =0 ; + + plane = plane_state->bigjoiner_plane; +if (plane && !intel_atomic_get_new_plane_state (state, plane)) { + new_plane_state =intel_atomic_get_plane_state (state, plane); +if (IS_ERR (new_plane_state)) +return PTR_ERR (new_plane_state); + + ret =1 ; + } + + plane = plane_state->planar_linked_plane; +if (plane && !intel_atomic_get_new_plane_state (state, plane)) { + new_plane_state =intel_atomic_get_plane_state (state, plane); +if (IS_ERR (new_plane_state)) +return PTR_ERR (new_plane_state); + + ret =1 ; + } + +return ret; +} +static int icl_add_linked_planes (struct intel_atomic_state *state) { -struct intel_plane *plane, *linked; -struct intel_plane_state *plane_state, *linked_plane_state; +struct intel_plane *plane; +struct intel_plane_state *old_plane_state, *new_plane_state; +struct intel_crtc *crtc, *linked_crtc; +struct intel_crtc_state *old_crtc_state, *new_crtc_state, *linked_crtc_state; +bool added;int i; -for_each_new_intel_plane_in_state (state, plane, plane_state, i) { - linked = plane_state->planar_linked_plane; +/* +* Iteratively add plane_state->linked_plane and plane_state->bigjoiner_plane +* +* This needs to be done repeatedly, because of is a funny interaction; +* the Y-plane may be assigned differently on the other bigjoiner crtc, +* and we could end up with the following evil recursion, when only adding a +* single plane to state: +* +* XRGB8888 master plane 6 adds NV12 slave Y-plane 6, which adds slave UV plane 0, +* which adds master UV plane 0, which adds master Y-plane 7, which adds XRGB8888 +* slave plane 7. +* +* We could pull in even more because of old_plane_state vs new_plane_state. +* +* Max depth = 5 (or 7 for evil case) in this case. +* Number of passes will be less, because newly added planes show up in the +* same iteration round when added_plane->index > plane->index. +*/ + do { + added = false; -if (!linked) -continue ; + for_each_oldnew_intel_plane_in_state(state, plane, old_plane_state, new_plane_state, i) { + int ret, ret2; + + ret = icl_add_dependent_planes(state, old_plane_state); + if (ret < 0) + return ret; + + ret2 = icl_add_dependent_planes(state, new_plane_state); + if (ret2 < 0) + return ret2;
Quoted 4 lines
drivers/gpu/drm/i915/display/intel_display.c static bool check_single_encoder_cloning(struct drm_atomic_state *state, · line 11883
Quoted 4 lines
drivers/gpu/drm/i915/display/intel_display.c +1
-3- linked_plane_state =intel_atomic_get_plane_state (state, linked); -if (IS_ERR (linked_plane_state)) -return PTR_ERR (linked_plane_state); + added |= ret || ret2;
I suspect passing &added to the functions would be less annoying than this magic return 1 stuff.
Quoted 82 lines
Quoted 82 lines
drivers/gpu/drm/i915/display/intel_display.c +65
-2+ } + }while (added); + +/* +* Make sure bigjoiner slave crtc's are also pulled in. This is not done automatically +* when adding slave planes, because plane_state->crtc is null. +*/ +for_each_oldnew_intel_crtc_in_state (state, crtc, old_crtc_state, new_crtc_state, i) { + linked_crtc = old_crtc_state->bigjoiner_linked_crtc; +if (linked_crtc) { + linked_crtc_state = +intel_atomic_get_crtc_state (&state->base, linked_crtc); + +if (IS_ERR (linked_crtc_state)) +return PTR_ERR (linked_crtc_state); + } + + linked_crtc = new_crtc_state->bigjoiner_linked_crtc; +if (linked_crtc && linked_crtc != old_crtc_state->bigjoiner_linked_crtc) { + linked_crtc_state = +intel_atomic_get_crtc_state (&state->base, linked_crtc); -WARN_ON (linked_plane_state->planar_linked_plane != plane); -WARN_ON (linked_plane_state->planar_slave == plane_state->planar_slave); +if (IS_ERR (linked_crtc_state)) +return PTR_ERR (linked_crtc_state); + } }return 0 ;@@ -13799,6 +13876,7 @@ static int intel_atomic_check_bigjoiner(struct intel_atomic_state *state)struct drm_i915_private *dev_priv =to_i915 (state->base.dev);struct intel_crtc_state *old_crtc_state, *new_crtc_state, *slave_crtc_state, *master_crtc_state;struct intel_crtc *crtc, *slave, *master; +struct intel_plane *plane;int i, ret =0 ;if (INTEL_GEN (dev_priv) <11 )@@ -13894,6 +13972,48 @@ static int intel_atomic_check_bigjoiner(struct intel_atomic_state *state)return ret; } +/* +* Setup and teardown the new bigjoiner plane mappings. +*/ +for_each_intel_plane (&dev_priv->drm, plane) { +struct intel_plane_state *plane_state; +struct intel_plane *other_plane =NULL ; + + crtc =intel_get_crtc_for_pipe (dev_priv, plane->pipe); + old_crtc_state =intel_atomic_get_old_crtc_state (state, crtc); + new_crtc_state =intel_atomic_get_new_crtc_state (state, crtc); + +if (!new_crtc_state || !needs_modeset (new_crtc_state)) +continue ; + +if (new_crtc_state->bigjoiner) { +struct intel_crtc *other_crtc = + new_crtc_state->bigjoiner_linked_crtc; +bool found = false; + +for_each_intel_plane_on_crtc (&dev_priv->drm, other_crtc, other_plane) { +if (other_plane->id != plane->id) +continue ; + + found = true; +break ; + } + +/* All pipes should have identical planes. */ +if (WARN_ON (!found)) +return -EINVAL ; + }else if (!old_crtc_state->bigjoiner) { +continue ; + } + + plane_state =intel_atomic_get_plane_state (state, plane); +if (IS_ERR (plane_state)) +return PTR_ERR (plane_state); + + plane_state->bigjoiner_plane = other_plane; + plane_state->bigjoiner_slave = new_crtc_state->bigjoiner_slave;
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_display.c static int intel_atomic_check_bigjoiner(struct intel_atomic_state *state) · line 14015
Quoted 1 line
drivers/gpu/drm/i915/display/intel_display.c +1
-0+ }Is my understanding correct that we always grab the corresponding plane on the other CRTC when the big joiner is active? I.e., even in cases where the uapi plane is restricted to just one half of the screen, we're still going to grab the bigjoiner slave plane? I guess trying to restrict this to only cases where the uapi plane covers both pipes would make this whole thing even more complicated.
Yeah, I'm thinking we can just ignore that particular optimization. Would need to somehow convince ourselves early that the plane still remains on its own half of the screen, or we'd need to come up with some kind of retry loop for this that can restart if a new plane gets added in the middle of the process. IMO not worth the hassle.
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerPATCH 16/23 drm/i915: Program planes in bigjoiner mode.
In reply to Maarten LankhorstNow that we can program planes from the update_slave callback, and we have done all fb pinning correctly, it's time to program those planes as well.
We use the update_slave callback as it allows us to use the separate states correctly.
--- .../gpu/drm/i915/display/intel_atomic_plane.c | 53 +++++++++++++++++++ .../gpu/drm/i915/display/intel_atomic_plane.h | 2 + drivers/gpu/drm/i915/display/intel_display.c | 4 +- 3 files changed, 57 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_atomic_plane.c +53 -0
@@ -366,6 +366,59 @@ void skl_update_planes_on_crtc(struct intel_atomic_state *state, } } +void icl_update_bigjoiner_planes_on_crtc (struct intel_atomic_state *state, +struct intel_crtc *crtc) +{ +struct intel_crtc_state *old_crtc_state = +intel_atomic_get_old_crtc_state (state, crtc); +struct intel_crtc_state *new_crtc_state = +intel_atomic_get_new_crtc_state (state, crtc); +struct skl_ddb_entry entries_y[I915_MAX_PLANES ]; +struct skl_ddb_entry entries_uv[I915_MAX_PLANES ]; +u32 update_mask = new_crtc_state->update_planes; +struct intel_plane *plane; + +memcpy (entries_y, old_crtc_state->wm.skl.plane_ddb_y, +sizeof (old_crtc_state->wm.skl.plane_ddb_y)); +memcpy (entries_uv, old_crtc_state->wm.skl.plane_ddb_uv, +sizeof (old_crtc_state->wm.skl.plane_ddb_uv)); + +while ((plane =skl_next_plane_to_commit (state, crtc, + entries_y, entries_uv, + &update_mask))) { +struct intel_plane_state *new_plane_state = +intel_atomic_get_new_plane_state (state, plane); +const struct intel_plane_state *master_plane_state; + +if (new_plane_state->base.visible) { + master_plane_state = +intel_atomic_get_new_plane_state (state, new_plane_state->bigjoiner_plane); + +intel_update_slave (plane, new_crtc_state, + master_plane_state, new_plane_state); + }else if (new_plane_state->slave) { +/* +* bigjoiner slave + planar slave. +* The correct sequence is to get from the planar slave to planar master, +* then to the master plane state for the master_plane_state. +*/ + +struct intel_plane *linked = new_plane_state->linked_plane; +const struct intel_plane_state *uv_plane_state = +intel_atomic_get_new_plane_state (state, linked); + + linked = uv_plane_state->bigjoiner_plane; + master_plane_state = +intel_atomic_get_new_plane_state (state, linked); + +intel_update_slave (plane, new_crtc_state, + master_plane_state, new_plane_state); + }else { +intel_disable_plane (plane, new_crtc_state); + } + } +} +void i9xx_update_planes_on_crtc (struct intel_atomic_state *state,struct intel_crtc *crtc) {
drivers/gpu/drm/i915/display/intel_atomic_plane.h +2 -0
@@ -30,6 +30,8 @@ void intel_plane_free(struct intel_plane *plane);struct drm_plane_state *intel_plane_duplicate_state (struct drm_plane *plane);void intel_plane_destroy_state (struct drm_plane *plane,struct drm_plane_state *state); +void icl_update_bigjoiner_planes_on_crtc (struct intel_atomic_state *state, +struct intel_crtc *crtc);void skl_update_planes_on_crtc (struct intel_atomic_state *state,struct intel_crtc *crtc); void i9xx_update_planes_on_crtc(struct intel_atomic_state *state,
drivers/gpu/drm/i915/display/intel_display.c +2 -2
@@ -14223,8 +14223,8 @@ static void intel_update_crtc(struct intel_crtc *crtc,commit_pipe_config (state, old_crtc_state, new_crtc_state); -if (new_crtc_state->bigjoiner) - {/* Not supported yet */ } +if (new_crtc_state->bigjoiner_slave) +icl_update_bigjoiner_planes_on_crtc (state, crtc);else if (INTEL_GEN (dev_priv) >=9 )skl_update_planes_on_crtc (state, crtc);else
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 16/23] drm/i915: Program planes in bigjoiner mode.
Quoted 19 lines · Maarten Lankhorst
Now that we can program planes from the
update_slavecallback, and we have done all fb pinning correctly, it's time to program those planes as well.We use the
update_slavecallback as it allows us to use the separate states correctly.Signed-off-by Maarten Lankhorst <[email protected]>--- .../gpu/drm/i915/display/intel_atomic_plane.c | 53 +++++++++++++++++++ .../gpu/drm/i915/display/intel_atomic_plane.h | 2 + drivers/gpu/drm/i915/display/intel_display.c | 4 +- 3 files changed, 57 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/display/intel_atomic_plane.c +0
-0
drivers/gpu/drm/i915/display/intel_atomic_plane.c void skl_update_planes_on_crtc(struct intel_atomic_state *state, · line 370
Quoted 5 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c +2
-0@@ -366,6 +366,59 @@ void skl_update_planes_on_crtc(struct intel_atomic_state *state, } } +void icl_update_bigjoiner_planes_on_crtc (struct intel_atomic_state *state, +struct intel_crtc *crtc)
This plane stuff is where things go very much off the rails IMO. Planes should not have to know anything about bigjoiner. They should just have their appropriate hw state and blindly bash it into the hardware.
Quoted 89 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c +51
-0+{ +struct intel_crtc_state *old_crtc_state = +intel_atomic_get_old_crtc_state (state, crtc); +struct intel_crtc_state *new_crtc_state = +intel_atomic_get_new_crtc_state (state, crtc); +struct skl_ddb_entry entries_y[I915_MAX_PLANES ]; +struct skl_ddb_entry entries_uv[I915_MAX_PLANES ]; +u32 update_mask = new_crtc_state->update_planes; +struct intel_plane *plane; + +memcpy (entries_y, old_crtc_state->wm.skl.plane_ddb_y, +sizeof (old_crtc_state->wm.skl.plane_ddb_y)); +memcpy (entries_uv, old_crtc_state->wm.skl.plane_ddb_uv, +sizeof (old_crtc_state->wm.skl.plane_ddb_uv)); + +while ((plane =skl_next_plane_to_commit (state, crtc, + entries_y, entries_uv, + &update_mask))) { +struct intel_plane_state *new_plane_state = +intel_atomic_get_new_plane_state (state, plane); +const struct intel_plane_state *master_plane_state; + +if (new_plane_state->base.visible) { + master_plane_state = +intel_atomic_get_new_plane_state (state, new_plane_state->bigjoiner_plane); + +intel_update_slave (plane, new_crtc_state, + master_plane_state, new_plane_state); + }else if (new_plane_state->slave) { +/* +* bigjoiner slave + planar slave. +* The correct sequence is to get from the planar slave to planar master, +* then to the master plane state for the master_plane_state. +*/ + +struct intel_plane *linked = new_plane_state->linked_plane; +const struct intel_plane_state *uv_plane_state = +intel_atomic_get_new_plane_state (state, linked); + + linked = uv_plane_state->bigjoiner_plane; + master_plane_state = +intel_atomic_get_new_plane_state (state, linked); + +intel_update_slave (plane, new_crtc_state, + master_plane_state, new_plane_state); + }else { +intel_disable_plane (plane, new_crtc_state); + } + } +} +void i9xx_update_planes_on_crtc (struct intel_atomic_state *state,struct intel_crtc *crtc) {drivers/gpu/drm/i915/display/intel_atomic_plane.h +2
-0@@ -30,6 +30,8 @@ void intel_plane_free(struct intel_plane *plane);struct drm_plane_state *intel_plane_duplicate_state (struct drm_plane *plane);void intel_plane_destroy_state (struct drm_plane *plane,struct drm_plane_state *state); +void icl_update_bigjoiner_planes_on_crtc (struct intel_atomic_state *state, +struct intel_crtc *crtc);void skl_update_planes_on_crtc (struct intel_atomic_state *state,struct intel_crtc *crtc); void i9xx_update_planes_on_crtc(struct intel_atomic_state *state,drivers/gpu/drm/i915/display/intel_display.c +2
-2@@ -14223,8 +14223,8 @@ static void intel_update_crtc(struct intel_crtc *crtc,commit_pipe_config (state, old_crtc_state, new_crtc_state); -if (new_crtc_state->bigjoiner) - {/* Not supported yet */ } +if (new_crtc_state->bigjoiner_slave) +icl_update_bigjoiner_planes_on_crtc (state, crtc);else if (INTEL_GEN (dev_priv) >=9 )skl_update_planes_on_crtc (state, crtc);else Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerRe: [PATCH 16/23] drm/i915: Program planes in bigjoiner mode.
Op 26-09-2019 om 15:06 schreef Ville Syrjälä:
Quoted 23 lines · Maarten Lankhorst
Quoted 22 lines
Now that we can program planes from the
update_slavecallback, and we have done all fb pinning correctly, it's time to program those planes as well.We use the
update_slavecallback as it allows us to use the separate states correctly.Signed-off-by Maarten Lankhorst <[email protected]>--- .../gpu/drm/i915/display/intel_atomic_plane.c | 53 +++++++++++++++++++ .../gpu/drm/i915/display/intel_atomic_plane.h | 2 + drivers/gpu/drm/i915/display/intel_display.c | 4 +- 3 files changed, 57 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/display/intel_atomic_plane.c +0
-0@@ -366,6 +366,59 @@ void skl_update_planes_on_crtc(struct intel_atomic_state *state, } }
Quoted 6 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c void skl_update_planes_on_crtc(struct intel_atomic_state *state, · line 370
Quoted 2 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c +2
-0+void icl_update_bigjoiner_planes_on_crtc (struct intel_atomic_state *state, +struct intel_crtc *crtc)This plane stuff is where things go very much off the rails IMO. Planes should not have to know anything about bigjoiner. They should just have their appropriate hw state and blindly bash it into the hardware.
We already need this for planar slave/master, what's the issue exactly?
We're using master_plane_state for all plane properties (fb/rotation/props) and plane_state for writing all state.
Quoted 85 lines
Quoted 85 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c +51
-0+{ +struct intel_crtc_state *old_crtc_state = +intel_atomic_get_old_crtc_state (state, crtc); +struct intel_crtc_state *new_crtc_state = +intel_atomic_get_new_crtc_state (state, crtc); +struct skl_ddb_entry entries_y[I915_MAX_PLANES ]; +struct skl_ddb_entry entries_uv[I915_MAX_PLANES ]; +u32 update_mask = new_crtc_state->update_planes; +struct intel_plane *plane; + +memcpy (entries_y, old_crtc_state->wm.skl.plane_ddb_y, +sizeof (old_crtc_state->wm.skl.plane_ddb_y)); +memcpy (entries_uv, old_crtc_state->wm.skl.plane_ddb_uv, +sizeof (old_crtc_state->wm.skl.plane_ddb_uv)); + +while ((plane =skl_next_plane_to_commit (state, crtc, + entries_y, entries_uv, + &update_mask))) { +struct intel_plane_state *new_plane_state = +intel_atomic_get_new_plane_state (state, plane); +const struct intel_plane_state *master_plane_state; + +if (new_plane_state->base.visible) { + master_plane_state = +intel_atomic_get_new_plane_state (state, new_plane_state->bigjoiner_plane); + +intel_update_slave (plane, new_crtc_state, + master_plane_state, new_plane_state); + }else if (new_plane_state->slave) { +/* +* bigjoiner slave + planar slave. +* The correct sequence is to get from the planar slave to planar master, +* then to the master plane state for the master_plane_state. +*/ + +struct intel_plane *linked = new_plane_state->linked_plane; +const struct intel_plane_state *uv_plane_state = +intel_atomic_get_new_plane_state (state, linked); + + linked = uv_plane_state->bigjoiner_plane; + master_plane_state = +intel_atomic_get_new_plane_state (state, linked); + +intel_update_slave (plane, new_crtc_state, + master_plane_state, new_plane_state); + }else { +intel_disable_plane (plane, new_crtc_state); + } + } +} +void i9xx_update_planes_on_crtc (struct intel_atomic_state *state,struct intel_crtc *crtc) {drivers/gpu/drm/i915/display/intel_atomic_plane.h +2
-0@@ -30,6 +30,8 @@ void intel_plane_free(struct intel_plane *plane);struct drm_plane_state *intel_plane_duplicate_state (struct drm_plane *plane);void intel_plane_destroy_state (struct drm_plane *plane,struct drm_plane_state *state); +void icl_update_bigjoiner_planes_on_crtc (struct intel_atomic_state *state, +struct intel_crtc *crtc);void skl_update_planes_on_crtc (struct intel_atomic_state *state,struct intel_crtc *crtc); void i9xx_update_planes_on_crtc(struct intel_atomic_state *state,drivers/gpu/drm/i915/display/intel_display.c +2
-2@@ -14223,8 +14223,8 @@ static void intel_update_crtc(struct intel_crtc *crtc,commit_pipe_config (state, old_crtc_state, new_crtc_state); -if (new_crtc_state->bigjoiner) - {/* Not supported yet */ } +if (new_crtc_state->bigjoiner_slave) +icl_update_bigjoiner_planes_on_crtc (state, crtc);else if (INTEL_GEN (dev_priv) >=9 )skl_update_planes_on_crtc (state, crtc);else Signature · 1 line
2.20.1
Quoted 4 lines
Quoted 4 lines
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 16/23] drm/i915: Program planes in bigjoiner mode.
Quoted 24 lines · Maarten Lankhorst
Op 26-09-2019 om 15:06 schreef Ville Syrjälä:
Quoted 23 lines · Maarten Lankhorst
Quoted 22 lines
Now that we can program planes from the
update_slavecallback, and we have done all fb pinning correctly, it's time to program those planes as well.We use the
update_slavecallback as it allows us to use the separate states correctly.Signed-off-by Maarten Lankhorst <[email protected]>--- .../gpu/drm/i915/display/intel_atomic_plane.c | 53 +++++++++++++++++++ .../gpu/drm/i915/display/intel_atomic_plane.h | 2 + drivers/gpu/drm/i915/display/intel_display.c | 4 +- 3 files changed, 57 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/display/intel_atomic_plane.c +0
-0@@ -366,6 +366,59 @@ void skl_update_planes_on_crtc(struct intel_atomic_state *state, } }
Quoted 8 lines
Quoted 6 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c void skl_update_planes_on_crtc(struct intel_atomic_state *state, · line 370
Quoted 2 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c +2
-0+void icl_update_bigjoiner_planes_on_crtc (struct intel_atomic_state *state, +struct intel_crtc *crtc)This plane stuff is where things go very much off the rails IMO. Planes should not have to know anything about bigjoiner. They should just have their appropriate hw state and blindly bash it into the hardware.
We already need this for planar slave/master, what's the issue exactly?
That already is too fragile. I don't want this spreading all over the driver and coupling everything to the bigjoiner logic.
Here's a crude idea how I think we might avoid this:git://github.com/vsyrjala/linux.git uapi_hw_state_split
But I didn't dare boot it yet...
Quoted 93 lines
We're using
master_plane_statefor all plane properties (fb/rotation/props) andplane_statefor writing all state.Quoted 89 lines
Quoted 89 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c +51
-0+{ +struct intel_crtc_state *old_crtc_state = +intel_atomic_get_old_crtc_state (state, crtc); +struct intel_crtc_state *new_crtc_state = +intel_atomic_get_new_crtc_state (state, crtc); +struct skl_ddb_entry entries_y[I915_MAX_PLANES ]; +struct skl_ddb_entry entries_uv[I915_MAX_PLANES ]; +u32 update_mask = new_crtc_state->update_planes; +struct intel_plane *plane; + +memcpy (entries_y, old_crtc_state->wm.skl.plane_ddb_y, +sizeof (old_crtc_state->wm.skl.plane_ddb_y)); +memcpy (entries_uv, old_crtc_state->wm.skl.plane_ddb_uv, +sizeof (old_crtc_state->wm.skl.plane_ddb_uv)); + +while ((plane =skl_next_plane_to_commit (state, crtc, + entries_y, entries_uv, + &update_mask))) { +struct intel_plane_state *new_plane_state = +intel_atomic_get_new_plane_state (state, plane); +const struct intel_plane_state *master_plane_state; + +if (new_plane_state->base.visible) { + master_plane_state = +intel_atomic_get_new_plane_state (state, new_plane_state->bigjoiner_plane); + +intel_update_slave (plane, new_crtc_state, + master_plane_state, new_plane_state); + }else if (new_plane_state->slave) { +/* +* bigjoiner slave + planar slave. +* The correct sequence is to get from the planar slave to planar master, +* then to the master plane state for the master_plane_state. +*/ + +struct intel_plane *linked = new_plane_state->linked_plane; +const struct intel_plane_state *uv_plane_state = +intel_atomic_get_new_plane_state (state, linked); + + linked = uv_plane_state->bigjoiner_plane; + master_plane_state = +intel_atomic_get_new_plane_state (state, linked); + +intel_update_slave (plane, new_crtc_state, + master_plane_state, new_plane_state); + }else { +intel_disable_plane (plane, new_crtc_state); + } + } +} +void i9xx_update_planes_on_crtc (struct intel_atomic_state *state,struct intel_crtc *crtc) {drivers/gpu/drm/i915/display/intel_atomic_plane.h +2
-0@@ -30,6 +30,8 @@ void intel_plane_free(struct intel_plane *plane);struct drm_plane_state *intel_plane_duplicate_state (struct drm_plane *plane);void intel_plane_destroy_state (struct drm_plane *plane,struct drm_plane_state *state); +void icl_update_bigjoiner_planes_on_crtc (struct intel_atomic_state *state, +struct intel_crtc *crtc);void skl_update_planes_on_crtc (struct intel_atomic_state *state,struct intel_crtc *crtc); void i9xx_update_planes_on_crtc(struct intel_atomic_state *state,drivers/gpu/drm/i915/display/intel_display.c +2
-2@@ -14223,8 +14223,8 @@ static void intel_update_crtc(struct intel_crtc *crtc,commit_pipe_config (state, old_crtc_state, new_crtc_state); -if (new_crtc_state->bigjoiner) - {/* Not supported yet */ } +if (new_crtc_state->bigjoiner_slave) +icl_update_bigjoiner_planes_on_crtc (state, crtc);else if (INTEL_GEN (dev_priv) >=9 )skl_update_planes_on_crtc (state, crtc);else Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerRe: [PATCH 16/23] drm/i915: Program planes in bigjoiner mode.
Op 26-09-2019 om 18:09 schreef Ville Syrjälä:
Quoted 31 lines · Maarten Lankhorst
Quoted 30 lines
Op 26-09-2019 om 15:06 schreef Ville Syrjälä:
Quoted 29 lines · Maarten Lankhorst
Quoted 19 lines
Now that we can program planes from the
update_slavecallback, and we have done all fb pinning correctly, it's time to program those planes as well.We use the
update_slavecallback as it allows us to use the separate states correctly.Signed-off-by Maarten Lankhorst <[email protected]>--- .../gpu/drm/i915/display/intel_atomic_plane.c | 53 +++++++++++++++++++ .../gpu/drm/i915/display/intel_atomic_plane.h | 2 + drivers/gpu/drm/i915/display/intel_display.c | 4 +- 3 files changed, 57 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/display/intel_atomic_plane.c +0
-0drivers/gpu/drm/i915/display/intel_atomic_plane.c void skl_update_planes_on_crtc(struct intel_atomic_state *state, · line 370
Quoted 5 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c +2
-0@@ -366,6 +366,59 @@ void skl_update_planes_on_crtc(struct intel_atomic_state *state, } } +void icl_update_bigjoiner_planes_on_crtc (struct intel_atomic_state *state, +struct intel_crtc *crtc)This plane stuff is where things go very much off the rails IMO. Planes should not have to know anything about bigjoiner. They should just have their appropriate hw state and blindly bash it into the hardware.
Quoted 8 lines
Quoted 1 line
We already need this for planar slave/master, what's the issue exactly?
That already is too fragile. I don't want this spreading all over the driver and coupling everything to the bigjoiner logic.
Here's a crude idea how I think we might avoid this:
git://github.com/vsyrjala/linux.gituapi_hw_state_splitBut I didn't dare boot it yet...
So you basically want the same uapi/hw split for planes as we did with crtc's above?
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 16/23] drm/i915: Program planes in bigjoiner mode.
Quoted 36 lines · Maarten Lankhorst
Op 26-09-2019 om 18:09 schreef Ville Syrjälä:
Quoted 35 lines · Maarten Lankhorst
Quoted 24 lines
Op 26-09-2019 om 15:06 schreef Ville Syrjälä:
Quoted 23 lines · Maarten Lankhorst
Quoted 22 lines
Now that we can program planes from the
update_slavecallback, and we have done all fb pinning correctly, it's time to program those planes as well.We use the
update_slavecallback as it allows us to use the separate states correctly.Signed-off-by Maarten Lankhorst <[email protected]>--- .../gpu/drm/i915/display/intel_atomic_plane.c | 53 +++++++++++++++++++ .../gpu/drm/i915/display/intel_atomic_plane.h | 2 + drivers/gpu/drm/i915/display/intel_display.c | 4 +- 3 files changed, 57 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/display/intel_atomic_plane.c +0
-0@@ -366,6 +366,59 @@ void skl_update_planes_on_crtc(struct intel_atomic_state *state, } }Quoted 7 lines
Quoted 6 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c void skl_update_planes_on_crtc(struct intel_atomic_state *state, · line 370
Quoted 2 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c +2
-0+void icl_update_bigjoiner_planes_on_crtc (struct intel_atomic_state *state, +struct intel_crtc *crtc)This plane stuff is where things go very much off the rails IMO. Planes should not have to know anything about bigjoiner. They should just have their appropriate hw state and blindly bash it into the hardware.
We already need this for planar slave/master, what's the issue exactly?
That already is too fragile. I don't want this spreading all over the driver and coupling everything to the bigjoiner logic.
Quoted 6 lines
Quoted 4 lines
Here's a crude idea how I think we might avoid this:
git://github.com/vsyrjala/linux.gituapi_hw_state_splitBut I didn't dare boot it yet...
So you basically want the same uapi/hw split for planes as we did with crtc's above?
Yes. And ideally doing the uapi->hw copy in one specific spot as early as possible, so that the rest of the driver can remain blissfully ignonarant about all of this.
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 16/23] drm/i915: Program planes in bigjoiner mode.
In reply to Ville SyrjäläQuoted 34 lines · Ville Syrjälä
Quoted 24 lines · Maarten Lankhorst
Op 26-09-2019 om 15:06 schreef Ville Syrjälä:
Quoted 23 lines · Maarten Lankhorst
Quoted 22 lines
Now that we can program planes from the
update_slavecallback, and we have done all fb pinning correctly, it's time to program those planes as well.We use the
update_slavecallback as it allows us to use the separate states correctly.Signed-off-by Maarten Lankhorst <[email protected]>--- .../gpu/drm/i915/display/intel_atomic_plane.c | 53 +++++++++++++++++++ .../gpu/drm/i915/display/intel_atomic_plane.h | 2 + drivers/gpu/drm/i915/display/intel_display.c | 4 +- 3 files changed, 57 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/display/intel_atomic_plane.c +0
-0@@ -366,6 +366,59 @@ void skl_update_planes_on_crtc(struct intel_atomic_state *state, } }Quoted 8 lines
Quoted 6 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c void skl_update_planes_on_crtc(struct intel_atomic_state *state, · line 370
Quoted 2 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c +2
-0+void icl_update_bigjoiner_planes_on_crtc (struct intel_atomic_state *state, +struct intel_crtc *crtc)This plane stuff is where things go very much off the rails IMO. Planes should not have to know anything about bigjoiner. They should just have their appropriate hw state and blindly bash it into the hardware.
We already need this for planar slave/master, what's the issue exactly?
Quoted 7 lines
That already is too fragile. I don't want this spreading all over the driver and coupling everything to the bigjoiner logic.
Here's a crude idea how I think we might avoid this:
git://github.com/vsyrjala/linux.gituapi_hw_state_splitBut I didn't dare boot it yet...
It took a handful extra fixes to get that to boot. But now I at least get a picture on the screen instead of oopses.
Fixes pushed to the same branch.
Looks like still something going wrong with the cursor ioctl though.
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerRe: [PATCH 16/23] drm/i915: Program planes in bigjoiner mode.
Op 26-09-2019 om 21:11 schreef Ville Syrjälä:
Quoted 39 lines · Ville Syrjälä
Quoted 38 lines · Maarten Lankhorst
Quoted 24 lines
Op 26-09-2019 om 15:06 schreef Ville Syrjälä:
Quoted 23 lines · Maarten Lankhorst
Quoted 22 lines
Now that we can program planes from the
update_slavecallback, and we have done all fb pinning correctly, it's time to program those planes as well.We use the
update_slavecallback as it allows us to use the separate states correctly.Signed-off-by Maarten Lankhorst <[email protected]>--- .../gpu/drm/i915/display/intel_atomic_plane.c | 53 +++++++++++++++++++ .../gpu/drm/i915/display/intel_atomic_plane.h | 2 + drivers/gpu/drm/i915/display/intel_display.c | 4 +- 3 files changed, 57 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/display/intel_atomic_plane.c +0
-0@@ -366,6 +366,59 @@ void skl_update_planes_on_crtc(struct intel_atomic_state *state, } }Quoted 7 lines
Quoted 6 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c void skl_update_planes_on_crtc(struct intel_atomic_state *state, · line 370
Quoted 2 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c +2
-0+void icl_update_bigjoiner_planes_on_crtc (struct intel_atomic_state *state, +struct intel_crtc *crtc)This plane stuff is where things go very much off the rails IMO. Planes should not have to know anything about bigjoiner. They should just have their appropriate hw state and blindly bash it into the hardware.
We already need this for planar slave/master, what's the issue exactly?
That already is too fragile. I don't want this spreading all over the driver and coupling everything to the bigjoiner logic.
Here's a crude idea how I think we might avoid this:
git://github.com/vsyrjala/linux.gituapi_hw_state_split
Quoted 8 lines
Quoted 1 line
But I didn't dare boot it yet...
It took a handful extra fixes to get that to boot. But now I at least get a picture on the screen instead of oopses.
Fixes pushed to the same branch.
Looks like still something going wrong with the cursor ioctl though.
I've done a uapi-hw split in my series, is that ok with you?
I will do a similar split for planes.
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 16/23] drm/i915: Program planes in bigjoiner mode.
Quoted 44 lines · Maarten Lankhorst
Op 26-09-2019 om 21:11 schreef Ville Syrjälä:
Quoted 43 lines · Ville Syrjälä
Quoted 31 lines · Maarten Lankhorst
Quoted 30 lines
Op 26-09-2019 om 15:06 schreef Ville Syrjälä:
Quoted 29 lines · Maarten Lankhorst
Quoted 19 lines
Now that we can program planes from the
update_slavecallback, and we have done all fb pinning correctly, it's time to program those planes as well.We use the
update_slavecallback as it allows us to use the separate states correctly.Signed-off-by Maarten Lankhorst <[email protected]>--- .../gpu/drm/i915/display/intel_atomic_plane.c | 53 +++++++++++++++++++ .../gpu/drm/i915/display/intel_atomic_plane.h | 2 + drivers/gpu/drm/i915/display/intel_display.c | 4 +- 3 files changed, 57 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/display/intel_atomic_plane.c +0
-0drivers/gpu/drm/i915/display/intel_atomic_plane.c void skl_update_planes_on_crtc(struct intel_atomic_state *state, · line 370
Quoted 5 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c +2
-0@@ -366,6 +366,59 @@ void skl_update_planes_on_crtc(struct intel_atomic_state *state, } } +void icl_update_bigjoiner_planes_on_crtc (struct intel_atomic_state *state, +struct intel_crtc *crtc)This plane stuff is where things go very much off the rails IMO. Planes should not have to know anything about bigjoiner. They should just have their appropriate hw state and blindly bash it into the hardware.
Quoted 8 lines
Quoted 1 line
We already need this for planar slave/master, what's the issue exactly?
That already is too fragile. I don't want this spreading all over the driver and coupling everything to the bigjoiner logic.
Here's a crude idea how I think we might avoid this:
git://github.com/vsyrjala/linux.gituapi_hw_state_splitBut I didn't dare boot it yet...
It took a handful extra fixes to get that to boot. But now I at least get a picture on the screen instead of oopses.
Quoted 7 lines
Quoted 4 lines
Fixes pushed to the same branch.
Looks like still something going wrong with the cursor ioctl though.
I've done a uapi-hw split in my series, is that ok with you?
I will do a similar split for planes.
I sent out some prep fixes, and respun my test branch as uapi_hw_state_split_2. Even the legacy cursor now works. So I think we might even have a chance of making this state split thing work.
My suggestion on how to do it would be:
1. split the state and do the uapi<->hw copies, but leave the hw state still called 'base' to minimize the diff. We can then more easily see all the places where we have to consult to the uapi state.
2. probably do the base->hw rename with cocci or something
I think at least one thing missing from your split crtc state was plane_mask. I added the required helpers for that in my prep patches.
I'm not 100% sure what we should do with the mode_change etc. flags. I guess we can leave them just in the uapi state as long as we don't get confused by the appearance of the 'uapi' name in various places.
Oh and to split the state for planes we'll need to hand roll our own drm_atomic_helper_check_plane_state(). I didn't do that in my prep patches because I was lazy.
Oh and drm_atomic_helper_setup_commit() is a big problem. In my test branch I just copy pasted it to i915 and changed it to check the hw state instead of the uapi state. But I don't really like that apporoach so maybe we could reuse this helper still and just abstract away the crtc active check.
Maybe have the caller pass in a function like so?
int drm_atomic_helper_setup_commit(struct drm_atomic_state *state,
bool nonblock,
bool (*crtc_is_active)(const struct drm_crtc_state *crtc_state));
{
...
- if (!old_crtc_state->active && !new_crtc_state->active) {
+ if (!crtc_is_active(old_crtc_state) && !crtc_is_active(new_crtc_state)) {
...Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 16/23] drm/i915: Program planes in bigjoiner mode.
Quoted 49 lines · Ville Syrjälä
Quoted 48 lines · Maarten Lankhorst
Op 26-09-2019 om 21:11 schreef Ville Syrjälä:
Quoted 47 lines · Ville Syrjälä
Quoted 31 lines · Maarten Lankhorst
Quoted 30 lines
Op 26-09-2019 om 15:06 schreef Ville Syrjälä:
Quoted 29 lines · Maarten Lankhorst
Quoted 19 lines
Now that we can program planes from the
update_slavecallback, and we have done all fb pinning correctly, it's time to program those planes as well.We use the
update_slavecallback as it allows us to use the separate states correctly.Signed-off-by Maarten Lankhorst <[email protected]>--- .../gpu/drm/i915/display/intel_atomic_plane.c | 53 +++++++++++++++++++ .../gpu/drm/i915/display/intel_atomic_plane.h | 2 + drivers/gpu/drm/i915/display/intel_display.c | 4 +- 3 files changed, 57 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/display/intel_atomic_plane.c +0
-0drivers/gpu/drm/i915/display/intel_atomic_plane.c void skl_update_planes_on_crtc(struct intel_atomic_state *state, · line 370
Quoted 5 lines
drivers/gpu/drm/i915/display/intel_atomic_plane.c +2
-0@@ -366,6 +366,59 @@ void skl_update_planes_on_crtc(struct intel_atomic_state *state, } } +void icl_update_bigjoiner_planes_on_crtc (struct intel_atomic_state *state, +struct intel_crtc *crtc)This plane stuff is where things go very much off the rails IMO. Planes should not have to know anything about bigjoiner. They should just have their appropriate hw state and blindly bash it into the hardware.
Quoted 8 lines
Quoted 1 line
We already need this for planar slave/master, what's the issue exactly?
That already is too fragile. I don't want this spreading all over the driver and coupling everything to the bigjoiner logic.
Here's a crude idea how I think we might avoid this:
git://github.com/vsyrjala/linux.gituapi_hw_state_splitBut I didn't dare boot it yet...
It took a handful extra fixes to get that to boot. But now I at least get a picture on the screen instead of oopses.
Fixes pushed to the same branch.
Looks like still something going wrong with the cursor ioctl though.
Quoted 8 lines
Quoted 3 lines
I've done a uapi-hw split in my series, is that ok with you?
I will do a similar split for planes.
I sent out some prep fixes, and respun my test branch as
uapi_hw_state_split_2. Even the legacy cursor now works. So I think we might even have a chance of making this state split thing work.
Drat. At least kms_big_fb is busted. Need to figure out why.
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerPATCH 17/23 drm/i915: Add intel_update_bigjoiner handling.
In reply to Maarten LankhorstEnabling is done in a special sequence and to be fair, so should plane updates be. Ideally the end user never notices the second pipe is used, so use the vblank evasion to cover both pipes.
This way ideally everything will be tear free, and updates are really atomic as userspace expects it.
The disable sequence still needs some love, but otherwise bigjoiner is close to ready now.
--- drivers/gpu/drm/i915/display/intel_display.c | 118 ++++++++++++++++--- drivers/gpu/drm/i915/display/intel_sprite.c | 22 +++- drivers/gpu/drm/i915/display/intel_sprite.h | 3 +- 3 files changed, 123 insertions(+), 20 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +104 -14
@@ -14230,7 +14230,7 @@ static void intel_update_crtc(struct intel_crtc *crtc,else i9xx_update_planes_on_crtc (state, crtc); -intel_pipe_update_end (new_crtc_state); +intel_pipe_update_end (new_crtc_state,NULL );if (new_crtc_state->update_pipe && !modeset && old_crtc_state->hw.mode.private_flags &I915_MODE_FLAG_INHERITED )
@@ -14312,6 +14312,56 @@ static void intel_commit_modeset_disables(struct intel_atomic_state *state) } } +static void intel_update_bigjoiner (struct intel_crtc *crtc, +struct intel_atomic_state *state, +struct intel_crtc_state *old_crtc_state, +struct intel_crtc_state *new_crtc_state) +{ +struct drm_i915_private *dev_priv =to_i915 (state->base.dev); +bool modeset =needs_modeset (new_crtc_state); +struct intel_crtc *slave = new_crtc_state->bigjoiner_linked_crtc; +struct intel_crtc_state *new_slave_crtc_state = +intel_atomic_get_new_crtc_state (state, slave); +struct intel_crtc_state *old_slave_crtc_state = +intel_atomic_get_old_crtc_state (state, slave); + +if (modeset) { +/* Enable slave first */ +update_scanline_offset (new_slave_crtc_state); +drm_calc_timestamping_constants (&slave->base, &new_slave_crtc_state->hw.transcoder_mode); + dev_priv->display.crtc_enable (new_slave_crtc_state, state); + +/* Then master */ +update_scanline_offset (new_crtc_state); +drm_calc_timestamping_constants (&crtc->base, &new_crtc_state->hw.transcoder_mode); + dev_priv->display.crtc_enable (new_crtc_state, state); + +/* vblanks work again, re-enable pipe CRC. */ +intel_crtc_enable_pipe_crc (crtc); + + }else { +intel_pre_plane_update (old_crtc_state, new_crtc_state); +intel_pre_plane_update (old_slave_crtc_state, new_slave_crtc_state); + +if (new_crtc_state->update_pipe) +intel_encoders_update_pipe (crtc, new_crtc_state, state); + } + +/* +* Perform vblank evasion around commit operation, and make sure to +* commit both planes simultaneously for best results. +*/ +intel_pipe_update_start (new_crtc_state); + +commit_pipe_config (state, old_crtc_state, new_crtc_state); +commit_pipe_config (state, old_slave_crtc_state, new_slave_crtc_state); + +skl_update_planes_on_crtc (state, crtc); +icl_update_bigjoiner_planes_on_crtc (state, slave); + +intel_pipe_update_end (new_crtc_state, new_slave_crtc_state); +} +static void intel_commit_modeset_enables (struct intel_atomic_state *state) {struct intel_crtc *crtc;
@@ -14330,7 +14380,7 @@ static void intel_commit_modeset_enables(struct intel_atomic_state *state)static void skl_commit_modeset_enables (struct intel_atomic_state *state) {struct drm_i915_private *dev_priv =to_i915 (state->base.dev); -struct intel_crtc *crtc; +struct intel_crtc *crtc, *slave;struct intel_crtc_state *old_crtc_state, *new_crtc_state;unsigned int updated =0 ;bool progress;
@@ -14339,11 +14389,47 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)u8 hw_enabled_slices = dev_priv->wm.skl_hw.ddb.enabled_slices;u8 required_slices = state->wm_results.ddb.enabled_slices;struct skl_ddb_entry entries[I915_MAX_PIPES ] = {}; +struct skl_ddb_entry new_entries[I915_MAX_PIPES ] = {}; +const struct intel_crtc_state *slave_crtc_state; +u32 dirty_pipes = state->wm_results.dirty_pipes; + +for_each_oldnew_intel_crtc_in_state (state, crtc, old_crtc_state, new_crtc_state, i) { +if (new_crtc_state->bigjoiner_slave) { +/* clear dirty bit, we're updated in master */ + dirty_pipes &= ~drm_crtc_mask (&crtc->base); +continue ; + } + +if (new_crtc_state->hw.active) { +if (new_crtc_state->bigjoiner) { + slave = new_crtc_state->bigjoiner_linked_crtc; + slave_crtc_state = +intel_atomic_get_new_crtc_state (state, + slave); + +/* put both entries in */ + new_entries[i].start = new_crtc_state->wm.skl.ddb.start; + new_entries[i].end = slave_crtc_state->wm.skl.ddb.end; + }else { + new_entries[i] = new_crtc_state->wm.skl.ddb; + } + } -for_each_oldnew_intel_crtc_in_state (state, crtc, old_crtc_state, new_crtc_state, i)/* ignore allocations for crtc's that have been turned off. */ -if (new_crtc_state->hw.active) +if (!new_crtc_state->hw.active ||needs_modeset (new_crtc_state)) +continue ; + +if (old_crtc_state->bigjoiner) { + slave = old_crtc_state->bigjoiner_linked_crtc; + slave_crtc_state = +intel_atomic_get_old_crtc_state (state, slave); + + entries[i].start = old_crtc_state->wm.skl.ddb.start; + entries[i].end = slave_crtc_state->wm.skl.ddb.end; + }else { entries[i] = old_crtc_state->wm.skl.ddb; + } + }/* If 2nd DBuf slice required, enable it here */ if (INTEL_GEN (dev_priv) >=11 && required_slices > hw_enabled_slices)
@@ -14364,16 +14450,15 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state) pipe = crtc->pipe; -if (updated & cmask || !new_crtc_state->hw.active) +if (updated & cmask || !new_crtc_state->hw.active || + new_crtc_state->bigjoiner_slave)continue ; -if (skl_ddb_allocation_overlaps (&new_crtc_state->wm.skl.ddb, - entries, +if (skl_ddb_allocation_overlaps (&new_entries[i], entries,INTEL_NUM_PIPES (dev_priv), i))continue ; updated |= cmask; - entries[i] = new_crtc_state->wm.skl.ddb;/* * If this is an already active pipe, it's DDB changed,
@@ -14381,18 +14466,23 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)* then we need to wait for a vblank to pass for the * new ddb allocation to take effect. */ -if (!skl_ddb_entry_equal (&new_crtc_state->wm.skl.ddb, - &old_crtc_state->wm.skl.ddb) && - !new_crtc_state->uapi.active_changed && - state->wm_results.dirty_pipes != updated) +if (!skl_ddb_entry_equal (&entries[i], &new_entries[i]) && + !needs_modeset (new_crtc_state) && + dirty_pipes != updated) vbl_wait = true; -intel_update_crtc (crtc, state, old_crtc_state, - new_crtc_state); +if (new_crtc_state->bigjoiner) +intel_update_bigjoiner (crtc, state, + old_crtc_state, + new_crtc_state); +else +intel_update_crtc (crtc, state, old_crtc_state, + new_crtc_state);if (vbl_wait)intel_wait_for_vblank (dev_priv, pipe); + entries[i] = new_entries[i]; progress = true; } }while (progress);
drivers/gpu/drm/i915/display/intel_sprite.c +17 -5
@@ -98,6 +98,8 @@ void intel_pipe_update_start(const struct intel_crtc_state *new_crtc_state)/* FIXME needs to be calibrated sensibly */ min = vblank_start -intel_usecs_to_scanlines (adjusted_mode, + new_crtc_state->bigjoiner ? +2 *VBLANK_EVASION_TIME_US :VBLANK_EVASION_TIME_US ); max = vblank_start -1 ;
@@ -188,7 +190,8 @@ void intel_pipe_update_start(const struct intel_crtc_state *new_crtc_state)* re-enables interrupts and verifies the update was actually completed * before a vblank. */ -void intel_pipe_update_end (struct intel_crtc_state *new_crtc_state) +void intel_pipe_update_end (struct intel_crtc_state *new_crtc_state, +struct intel_crtc_state *slave_crtc_state) {struct intel_crtc *crtc =to_intel_crtc (new_crtc_state->uapi.crtc);enum pipe pipe = crtc->pipe;
@@ -203,15 +206,24 @@ void intel_pipe_update_end(struct intel_crtc_state *new_crtc_state)* Would be slightly nice to just grab the vblank count and arm the * event outside of the critical section - the spinlock might spin for a * while ... */ -if (new_crtc_state->uapi.event) { -WARN_ON (drm_crtc_vblank_get (&crtc->base) !=0 ); +if (new_crtc_state->uapi.event || (slave_crtc_state && slave_crtc_state->uapi.event)) { +if (new_crtc_state->uapi.event) +WARN_ON (drm_crtc_vblank_get (&crtc->base) !=0 ); +if (slave_crtc_state && slave_crtc_state->uapi.event) +WARN_ON (drm_crtc_vblank_get (&crtc->base) !=0 );spin_lock (&crtc->base.dev->event_lock); -drm_crtc_arm_vblank_event (&crtc->base, - new_crtc_state->uapi.event); +if (new_crtc_state->uapi.event) +drm_crtc_arm_vblank_event (&crtc->base, + new_crtc_state->uapi.event); +if (slave_crtc_state && slave_crtc_state->uapi.event) +drm_crtc_arm_vblank_event (&crtc->base, + slave_crtc_state->uapi.event);spin_unlock (&crtc->base.dev->event_lock); new_crtc_state->uapi.event =NULL ; +if (slave_crtc_state) + slave_crtc_state->uapi.event =NULL ; }local_irq_enable ();
drivers/gpu/drm/i915/display/intel_sprite.h +2 -1
@@ -24,7 +24,8 @@ struct intel_plane *intel_sprite_plane_create(struct drm_i915_private *dev_priv,int intel_sprite_set_colorkey_ioctl (struct drm_device *dev,void *data,struct drm_file *file_priv);void intel_pipe_update_start (const struct intel_crtc_state *new_crtc_state); -void intel_pipe_update_end (struct intel_crtc_state *new_crtc_state); +void intel_pipe_update_end (struct intel_crtc_state *new_crtc_state, +struct intel_crtc_state *slave_crtc_state);int intel_plane_check_stride (const struct intel_plane_state *plane_state);int intel_plane_check_src_coordinates (struct intel_plane_state *plane_state);int chv_plane_check_rotation (const struct intel_plane_state *plane_state);
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerPATCH 18/23 drm/i915: Disable FBC in bigjoiner configuration.
In reply to Maarten LankhorstIs there any point in having FBC enabled on half a screen? I suppose it could still save power, but just feels wrong.. Can always be enabled later again if required.
--- drivers/gpu/drm/i915/display/intel_fbc.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/i915/display/intel_fbc.c +2 -0
@@ -1056,6 +1056,8 @@ void intel_fbc_choose_crtc(struct drm_i915_private *dev_priv,continue ; crtc_state =intel_atomic_get_new_crtc_state (state, crtc); +if (crtc_state->bigjoiner) +continue ; crtc_state->enable_fbc = true; crtc_chosen = true;
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerPATCH 19/23 drm/i915: Prepare atomic plane check for bigjoiner planes
In reply to Maarten LankhorstA lot of delta, the main difference is that the master_plane_state is not the same plane_state as being written to.
We read all properties like color key, crtc, fb, rotation from the master_plane_state and coordinate properties.
The coordinate properties are different between the 2 bigjoiner planes, as one gets the left and the other gets the right side.
Fortunately the drm core already has a src and dst rect, so we write those for each plane separately.
In case of cursor, we don't use the clipped coordinates, but the raw source coordinates from the master_plane_state instead.
--- drivers/gpu/drm/i915/display/intel_atomic.c | 7 +- .../gpu/drm/i915/display/intel_atomic_plane.c | 88 +++++++- .../gpu/drm/i915/display/intel_atomic_plane.h | 8 +- drivers/gpu/drm/i915/display/intel_display.c | 213 ++++++++++-------- drivers/gpu/drm/i915/display/intel_display.h | 5 +- .../drm/i915/display/intel_display_types.h | 1 + drivers/gpu/drm/i915/display/intel_sprite.c | 71 +++--- drivers/gpu/drm/i915/display/intel_sprite.h | 6 +- 8 files changed, 258 insertions(+), 141 deletions(-)
drivers/gpu/drm/i915/display/intel_atomic.c +4 -3
@@ -297,9 +297,10 @@ static void intel_atomic_setup_scaler(struct intel_crtc_scaler_state *scaler_stareturn ;/* set scaler mode */ -if (plane_state && plane_state->base.fb && - plane_state->base.fb->format->is_yuv && - plane_state->base.fb->format->num_planes >1 ) { +if (plane_state && (plane_state->linked_plane || + (!plane_state->bigjoiner_slave && plane_state->base.fb && + plane_state->base.fb->format->is_yuv && + plane_state->base.fb->format->num_planes >1 ))) {struct intel_plane *plane =to_intel_plane (plane_state->base.plane);if (IS_GEN (dev_priv,9 ) && !IS_GEMINILAKE (dev_priv)) {
drivers/gpu/drm/i915/display/intel_atomic_plane.c +80 -8
130 lines not on this page · raw message
drivers/gpu/drm/i915/display/intel_atomic_plane.h +6 -2
@@ -18,8 +18,6 @@ struct intel_plane_state;extern const struct drm_plane_helper_funcs intel_plane_helper_funcs; -unsigned int intel_plane_data_rate (const struct intel_crtc_state *crtc_state, -const struct intel_plane_state *plane_state);void intel_update_plane (struct intel_plane *plane,const struct intel_crtc_state *crtc_state,const struct intel_plane_state *plane_state);
@@ -43,10 +41,16 @@ int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_int intel_plane_atomic_calc_changes (const struct intel_crtc_state *old_crtc_state,struct intel_crtc_state *crtc_state,const struct intel_plane_state *old_plane_state, +const struct intel_plane_state *master_plane_state,struct intel_plane_state *plane_state);struct intel_crtc *intel_plane_get_crtc_from_states (struct intel_atomic_state *state,const struct intel_plane_state *old_plane_state,const struct intel_plane_state *new_plane_state); +int intel_atomic_plane_check_scaling (struct intel_crtc_state *crtc_state, +const struct intel_plane_state *master_plane_state, +struct intel_plane_state *plane_state, +int min_scale,int max_scale); +#endif /* __INTEL_ATOMIC_PLANE_H__ */
drivers/gpu/drm/i915/display/intel_display.c +121 -92
577 lines not on this page · raw message
drivers/gpu/drm/i915/display/intel_display.h +3 -2
@@ -562,8 +562,9 @@ u32 skl_plane_ctl(const struct intel_crtc_state *crtc_state,u32 skl_plane_ctl_crtc (const struct intel_crtc_state *crtc_state);u32 skl_plane_stride (const struct intel_plane_state *master_plane_state,const struct intel_plane_state *plane_state, -int plane); -int skl_check_plane_surface (struct intel_plane_state *plane_state); +int color_plane); +int skl_check_plane_surface (const struct intel_plane_state *master_plane_state, +struct intel_plane_state *plane_state);int i9xx_check_plane_surface (struct intel_plane_state *plane_state);int skl_format_to_fourcc (int format,bool rgb_order,bool alpha); unsigned int i9xx_plane_max_stride(struct intel_plane *plane,
drivers/gpu/drm/i915/display/intel_display_types.h +1 -0
@@ -1117,6 +1117,7 @@ struct intel_plane { const struct intel_crtc_state *crtc_state);bool (*get_hw_state)(struct intel_plane *plane,enum pipe *pipe);int (*check_plane)(struct intel_crtc_state *crtc_state, +const struct intel_plane_state *master_plane_state,struct intel_plane_state *plane_state); };
drivers/gpu/drm/i915/display/intel_sprite.c +39 -32
181 lines not on this page · raw message
drivers/gpu/drm/i915/display/intel_sprite.h +4 -2
@@ -26,8 +26,10 @@ int intel_sprite_set_colorkey_ioctl(struct drm_device *dev, void *data,void intel_pipe_update_start (const struct intel_crtc_state *new_crtc_state);void intel_pipe_update_end (struct intel_crtc_state *new_crtc_state,struct intel_crtc_state *slave_crtc_state); -int intel_plane_check_stride (const struct intel_plane_state *plane_state); -int intel_plane_check_src_coordinates (struct intel_plane_state *plane_state); +int intel_plane_check_stride (const struct intel_plane_state *master_plane_state, +const struct intel_plane_state *plane_state); +int intel_plane_check_src_coordinates (const struct intel_plane_state *master_plane_state, +struct intel_plane_state *plane_state);int chv_plane_check_rotation (const struct intel_plane_state *plane_state);struct intel_plane * skl_universal_plane_create(struct drm_i915_private *dev_priv,
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerPATCH 20/23 drm/i915: Make prepare_plane_fb() work with bigjoiner planes
In reply to Maarten LankhorstSimilar to plane programming, we need a separate master_plane_state from which we will read all atomic properties, and plane_state for the real coordinates.
Although we add all planes with icl_add_linked_planes(), icl_check_nv12_planes() may add extra Y planes on the slave CRTC. For those planes, the corresponding planes on the master CRTC are not added, so we have to be slightly more careful in that case.
--- .../gpu/drm/i915/display/intel_atomic_plane.c | 2 +- .../gpu/drm/i915/display/intel_atomic_plane.h | 4 ++ drivers/gpu/drm/i915/display/intel_display.c | 71 +++++++++++-------- 3 files changed, 47 insertions(+), 30 deletions(-)
drivers/gpu/drm/i915/display/intel_atomic_plane.c +1 -1
@@ -204,7 +204,7 @@ struct intel_crtc * intel_plane_get_crtc_from_states(struct intel_atomic_state *state, const struct intel_plane_state *old_plane_state, const struct intel_plane_state *new_plane_state) - { +{ struct drm_i915_private *dev_priv = to_i915(state->base.dev);struct intel_plane *plane =to_intel_plane (new_plane_state->base.plane);
drivers/gpu/drm/i915/display/intel_atomic_plane.h +4 -0
@@ -52,5 +52,9 @@ int intel_atomic_plane_check_scaling(struct intel_crtc_state *crtc_state,const struct intel_plane_state *master_plane_state, struct intel_plane_state *plane_state, int min_scale, int max_scale); +struct intel_crtc * +intel_plane_get_crtc_from_states (struct intel_atomic_state *state, +const struct intel_plane_state *old_plane_state, +const struct intel_plane_state *new_plane_state);#endif /* __INTEL_ATOMIC_PLANE_H__ */
drivers/gpu/drm/i915/display/intel_display.c +42 -29
150 lines not on this page · raw message
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerPATCH 21/23 drm/i915: Make sure watermarks work correctly with bigjoiner as well.
In reply to Maarten LankhorstFor bigjoiner, we cannot do drm_atomic_crtc_state_for_each_plane_state() on the crtc, because planes don't match the drm core state. We need a separate master_plane_state for all the properties, and a slave_plane_state for the rectangles/visibility etc.
This is similar to how we handle the Y plane, because it won't be directly calculated either. Instead it's calculated from the master crtc.
Add a intel_atomic_crtc_state_for_each_plane_state macro, which iterates over master_plane_state and obtains slave_plane_state as well. This cleans up code slightly as well.
--- drivers/gpu/drm/i915/display/intel_atomic.c | 2 +- .../gpu/drm/i915/display/intel_atomic_plane.c | 4 +- drivers/gpu/drm/i915/display/intel_display.h | 20 +- drivers/gpu/drm/i915/intel_pm.c | 201 ++++++++++-------- 4 files changed, 134 insertions(+), 93 deletions(-)
drivers/gpu/drm/i915/display/intel_atomic.c +1 -1
@@ -297,7 +297,7 @@ static void intel_atomic_setup_scaler(struct intel_crtc_scaler_state *scaler_stareturn ;/* set scaler mode */ -if (plane_state && (plane_state->linked_plane || +if (plane_state && (plane_state->planar_linked_plane || (!plane_state->bigjoiner_slave && plane_state->base.fb && plane_state->base.fb->format->is_yuv && plane_state->base.fb->format->num_planes >1 ))) {
drivers/gpu/drm/i915/display/intel_atomic_plane.c +2 -2
@@ -414,14 +414,14 @@ void icl_update_bigjoiner_planes_on_crtc(struct intel_atomic_state *state,intel_update_slave (plane, new_crtc_state, master_plane_state, new_plane_state); - }else if (new_plane_state->slave) { + }else if (new_plane_state->planar_slave) {/* * bigjoiner slave + planar slave. * The correct sequence is to get from the planar slave to planar master, * then to the master plane state for the master_plane_state. */ -struct intel_plane *linked = new_plane_state->linked_plane; +struct intel_plane *linked = new_plane_state->planar_linked_plane;const struct intel_plane_state *uv_plane_state =intel_atomic_get_new_plane_state (state, linked);
drivers/gpu/drm/i915/display/intel_display.h +19 -1
@@ -350,7 +350,7 @@ enum phy_fia { &(dev)->mode_config.plane_list, \ base.head) \ for_each_if((plane_mask) & \ - drm_plane_mask(&intel_plane->base))) + drm_plane_mask(&intel_plane->base))#define for_each_intel_plane_on_crtc (dev, intel_crtc, intel_plane) \ list_for_each_entry(intel_plane, \
@@ -440,6 +440,24 @@ enum phy_fia { (__i)--) \ for_each_if(crtc) +#define intel_atomic_crtc_state_for_each_plane_state ( \ + plane, master_plane_state, plane_state, \ + crtc_state) \ + for_each_intel_plane_mask(((crtc_state)->uapi.state->dev), (plane), \ + (((crtc_state)->bigjoiner_slave ? \ + intel_atomic_get_new_crtc_state( \ + to_intel_atomic_state((crtc_state)->uapi.state), \ + (crtc_state)->bigjoiner_linked_crtc) : \ + (crtc_state))->uapi.plane_mask)) \ + for_each_if ((((master_plane_state) = \ + to_intel_plane_state(__drm_atomic_get_current_plane_state((crtc_state)->uapi.state, &plane->base))), \ + ((plane) = (master_plane_state)->bigjoiner_slave ? \ + (master_plane_state)->bigjoiner_plane : \ + (plane)), \ + ((plane_state) = (master_plane_state)->bigjoiner_slave ? \ + to_intel_plane_state(__drm_atomic_get_current_plane_state((crtc_state)->uapi.state, &plane->base)) : \ + (master_plane_state)))) + void intel_link_compute_m_n(u16 bpp, int nlanes, int pixel_clock, int link_clock, struct intel_link_m_n *m_n,
drivers/gpu/drm/i915/intel_pm.c +112 -89
466 lines not on this page · raw message
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerPATCH 22/23 drm/i915: Add debugfs dumping for bigjoiner.
In reply to Maarten LankhorstIt's useful to know what the actual clipped state is, rather than the unclipped crtc properties.
This is useful when a plane is spread across 2 crtc's, where the slave crtc has no own plane properties but derives its clipped values from the master crtc.
--- drivers/gpu/drm/i915/i915_debugfs.c | 40 ++++++++++++----------------- 1 file changed, 17 insertions(+), 23 deletions(-)
drivers/gpu/drm/i915/i915_debugfs.c +17 -23
@@ -2661,42 +2661,31 @@ static void intel_plane_info(struct seq_file *m, struct intel_crtc *intel_crtc)struct intel_plane *intel_plane;for_each_intel_plane_on_crtc (dev, intel_crtc, intel_plane) { -struct drm_plane_state *state; +struct intel_plane_state *state;struct drm_plane *plane = &intel_plane->base;struct drm_format_name_buf format_name;char rot_str[48 ]; -if (!plane->state) { -seq_puts (m,"plane->state is NULL!\n" ); -continue ; - } - - state = plane->state; + state =to_intel_plane_state (plane->state); -if (state->fb) { -drm_get_format_name (state->fb->format->format, +if (state->base.fb) { +drm_get_format_name (state->base.fb->format->format, &format_name); + }else if (state->bigjoiner_slave) { +sprintf (format_name.str,"(slave)" ); }else {sprintf (format_name.str,"N/A" ); } -plane_rotation (rot_str,sizeof (rot_str), state->rotation); +plane_rotation (rot_str,sizeof (rot_str), state->base.rotation); -seq_printf (m,"\t--Plane id %d: type=%s, crtc_pos=%4dx%4d, crtc_size=%4dx%4d, src_pos=%d.%04ux%d.%04u, src_size=%d.%04ux%d.%04u, format=%s, rotation=%s\n" , +seq_printf (m,"\t--Plane id %d: type=%s, %sclipped crtc=" DRM_RECT_FMT ", clipped src=" DRM_RECT_FP_FMT ", format=%s, rotation=%s\n" , plane->base.id,plane_type (intel_plane->base.type), - state->crtc_x, state->crtc_y, - state->crtc_w, state->crtc_h, - (state->src_x >>16 ), - ((state->src_x &0xffff ) *15625 ) >>10 , - (state->src_y >>16 ), - ((state->src_y &0xffff ) *15625 ) >>10 , - (state->src_w >>16 ), - ((state->src_w &0xffff ) *15625 ) >>10 , - (state->src_h >>16 ), - ((state->src_h &0xffff ) *15625 ) >>10 , - format_name.str, - rot_str); + state->base.visible ?"visible, " :"" , +DRM_RECT_ARG (&state->base.dst), +DRM_RECT_FP_ARG (&state->base.src), + format_name.str, rot_str); } }
@@ -2752,6 +2741,11 @@ static int i915_display_info(struct seq_file *m, void *unused)yesno (pipe_config->hw.active), pipe_config->pipe_src_w, pipe_config->pipe_src_h, yesno(pipe_config->dither), pipe_config->pipe_bpp); +if (pipe_config->bigjoiner) +seq_printf (m,"\tLinked to [CRTC:%d:%s] as a %s\n" , + pipe_config->bigjoiner_linked_crtc->base.base.id, + pipe_config->bigjoiner_linked_crtc->base.name, + pipe_config->bigjoiner_slave ?"slave" :"master" );if (pipe_config->hw.active) { struct intel_plane *cursor =
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerPATCH 23/23 HAX to make it work on the icelake test system
In reply to Maarten LankhorstCan't figure out how it works, so just removing it..
--- drivers/gpu/drm/drm_dp_helper.c | 4 ++-- include/drm/drm_dp_helper.h | 1 + 2 files changed, 3 insertions(+), 2 deletions(-)
drivers/gpu/drm/drm_dp_helper.c +2 -2
@@ -1374,7 +1374,7 @@ u8 drm_dp_dsc_sink_max_slice_count(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE],if (slice_cap1 &DP_DSC_4_PER_DP_DSC_SINK )return 4 ;if (slice_cap1 &DP_DSC_2_PER_DP_DSC_SINK ) -return 2 ; +return 4 ;if (slice_cap1 &DP_DSC_1_PER_DP_DSC_SINK )return 1 ; }else {
@@ -1398,7 +1398,7 @@ u8 drm_dp_dsc_sink_max_slice_count(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE],if (slice_cap1 &DP_DSC_4_PER_DP_DSC_SINK )return 4 ;if (slice_cap1 &DP_DSC_2_PER_DP_DSC_SINK ) -return 2 ; +return 4 ;if (slice_cap1 &DP_DSC_1_PER_DP_DSC_SINK )return 1 ; }
include/drm/drm_dp_helper.h +1 -0
@@ -1222,6 +1222,7 @@ int drm_dp_dsc_sink_supported_input_bpcs(const u8 dsc_dpc[DP_DSC_RECEIVER_CAP_SIstatic inline bool drm_dp_sink_supports_dsc (const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE ]) { +return dsc_dpcd[DP_DSC_REV -DP_DSC_SUPPORT ];return dsc_dpcd[DP_DSC_SUPPORT -DP_DSC_SUPPORT ] &DP_DSC_DECOMPRESSION_IS_SUPPORTED ; }
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for series starting with [01/23] drm/i915/dp: Fix dsc bpp calculations, v2.
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: series starting with [01/23] drm/i915/dp: Fix dsc bpp calculations, v2.
URL : https://patchwork.freedesktop.org/series/66998/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip 5a06a0350a83 drm/i915/dp: Fix dsc bpp calculations, v2. 30142b729b5c HAX drm/i915: Disable FEC entirely for now -:14: WARNING:BAD_SIGN_OFF: 'Not-signed-off-by:' is the preferred signature form #14: Not-Signed-off-by: Maarten Lankhorst <[email protected]>
-:40: ERROR:MISSING_SIGN_OFF: Missing Signed-off-by: line(s)
total: 1 errors, 1 warnings, 0 checks, 19 lines checked2bb73b0ec47e drm/i915: Prepare to split crtc state in uapi and hw state
-:11: WARNING:COMMIT_LOG_LONG_LINE: Possible unwrapped commit description (prefer a maximum 75 chars per line) #11:
- crtc, *_changed flags, event, commit, state, mode_blob, (plane/connector/encoder)_mask.
-:2112: CHECK:MULTIPLE_ASSIGNMENTS: multiple assignments should be avoided #2112: FILE: drivers/gpu/drm/i915/display/intel_display.c:11201:
+ crtc_state->uapi.active = crtc_state->uapi.enable = true;
-:2810: CHECK:MULTIPLE_ASSIGNMENTS: multiple assignments should be avoided #2810: FILE: drivers/gpu/drm/i915/display/intel_display.c:16692:
+ crtc_state->hw.active = crtc_state->hw.enable =
-:3965: ERROR:CODE_INDENT: code indent should use tabs where possible #3965: FILE: drivers/gpu/drm/i915/display/intel_sprite.c:211:
+^I^I^I^I new_crtc_state->uapi.event);$
-:3965: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #3965: FILE: drivers/gpu/drm/i915/display/intel_sprite.c:211:
+ drm_crtc_arm_vblank_event(&crtc->base,
+ new_crtc_state->uapi.event);
total: 1 errors, 1 warnings, 3 checks, 4348 lines checked 8fa117d4a277 drm/i915: Handle a few more cases for hw/sw split fb10f9c4dae1 drm/i915: Complete sw/hw split89bdbc955927 drm/i915: Get rid of crtc_state->fb_changed 1997dbaaa507 drm/i915: Remove begin/finish_crtc_commit. 35e0e945926a drm/i915: Rename planar linked plane variables 11b08875cb14 drm/i915: Do not add all planes when checking scalers on glk+ c5ac35a82acd drm/i915/dp: Allow big joiner modes in intel_dp_mode_valid() 02ae546be7ff drm/i915: Try to make bigjoiner work in atomic check. -:143: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #143: FILE: drivers/gpu/drm/i915/display/intel_display.c:11826:
+ intel_atomic_get_new_crtc_state(state,
+ crtc_state->bigjoiner_linked_crtc);
-:191: CHECK:MULTIPLE_ASSIGNMENTS: multiple assignments should be avoided #191: FILE: drivers/gpu/drm/i915/display/intel_display.c:12326:
+ crtc_state->nv12_planes = crtc_state->c8_planes = crtc_state->update_planes = 0;
-:217: WARNING:LONG_LINE: line over 100 characters #217: FILE: drivers/gpu/drm/i915/display/intel_display.c:13625:
+ struct intel_crtc_state *old_crtc_state, *new_crtc_state, *slave_crtc_state, *master_crtc_state;
-:280: CHECK:MULTIPLE_ASSIGNMENTS: multiple assignments should be avoided #280: FILE: drivers/gpu/drm/i915/display/intel_display.c:13688:
+ slave = new_crtc_state->bigjoiner_linked_crtc =
-:290: WARNING:UNNECESSARY_ELSE: else is not generally useful after a break or return #290: FILE: drivers/gpu/drm/i915/display/intel_display.c:13698:
+ return -EINVAL;
+ } else {
-:348: ERROR:OPEN_BRACE: that open brace { should be on the previous line #348: FILE: drivers/gpu/drm/i915/display/intel_display.c:13930:
+ if (new_crtc_state->bigjoiner)
+ {/* Not supported yet */}
total: 1 errors, 2 warnings, 3 checks, 391 lines checked fe1d38cc6ac9 drm/i915: Enable big joiner support in enable and disable sequences. -:121: WARNING:LONG_LINE_COMMENT: line over 100 characters
#121: FILE: drivers/gpu/drm/i915/display/intel_ddi.c:4087:
+ /* Our own transcoder needs to be disabled when reading it in intel_ddi_read_func_ctl() */
-:123: WARNING:LONG_LINE: line over 100 characters #123: FILE: drivers/gpu/drm/i915/display/intel_ddi.c:4089:
+ pipe_config->cpu_transcoder = (enum transcoder)pipe_config->bigjoiner_linked_crtc->pipe;
-:231: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #231: FILE: drivers/gpu/drm/i915/display/intel_display.c:6527:
+ I915_WRITE(PIPE_MULT(cpu_transcoder),
+ pipe_config->pixel_multiplier - 1);
-:239: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #239: FILE: drivers/gpu/drm/i915/display/intel_display.c:6531:
+ intel_cpu_transcoder_set_m_n(pipe_config,
+ &pipe_config->fdi_m_n, NULL);
-:348: WARNING:BLOCK_COMMENT_STYLE: Block comments should align the * on each line #348: FILE: drivers/gpu/drm/i915/display/intel_display.c:8353:
+ /*
+ * transcoder is programmed to the full mode,
-:567: WARNING:SUSPECT_CODE_INDENT: suspect code indent for conditional statements (8, 8) #567: FILE: drivers/gpu/drm/i915/display/intel_display.c:13044:
+ if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE)) {
PIPE_CONF_CHECK_X(dpll_hw_state.dpll);
-:776: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV) #776: FILE: drivers/gpu/drm/i915/display/intel_display_types.h:789:
+#define PIPE_CONFIG_QUIRK_BIGJOINER_SLAVE (1<<1) /* bigjoiner slave, partial readout */
^
total: 0 errors, 4 warnings, 3 checks, 934 lines checked 0334bd232823 drm/i915: Make hardware readout work on i915. -:73: WARNING:LONG_LINE: line over 100 characters #73: FILE: drivers/gpu/drm/i915/display/intel_display.c:10038:
+ (I915_READ(PLANE_SURF(bigjoiner_pipe, plane_id)) & 0xfffff000) == plane_config->base) {
-:74: WARNING:LONG_LINE: line over 100 characters #74: FILE: drivers/gpu/drm/i915/display/intel_display.c:10039:
+ val = I915_READ(PLANE_SIZE(crtc_state->bigjoiner_linked_crtc->pipe, plane_id));
-:109: WARNING:LONG_LINE: line over 100 characters #109: FILE: drivers/gpu/drm/i915/display/intel_display.c:17173:
+ WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
-:136: WARNING:BLOCK_COMMENT_STYLE: Block comments should align the * on each line #136: FILE: drivers/gpu/drm/i915/display/intel_display.c:17238:
+ /*
+ * FIXME don't have the fb yet, so can't
total: 0 errors, 4 warnings, 0 checks, 119 lines checked 87f053dd9d78 drm/i915: Prepare update_slave() for bigjoiner plane updates -:138: WARNING:LONG_LINE: line over 100 characters
#138: FILE: drivers/gpu/drm/i915/display/intel_display.c:14806:
+ intel_atomic_get_new_plane_state(intel_state, new_plane_state->planar_linked_plane);
total: 0 errors, 1 warnings, 0 checks, 318 lines checked5c48f75472bd drm/i915: Link planes in a bigjoiner configuration.
-:28: ERROR:OPEN_BRACE: open brace '{' following function definitions go on the next line #28: FILE: drivers/gpu/drm/i915/display/intel_atomic_plane.c:185:
+struct intel_crtc *
+intel_plane_get_crtc_from_states(struct intel_atomic_state *state,
+ const struct intel_plane_state *old_plane_state,
+ const struct intel_plane_state *new_plane_state)
+ {
-:32: WARNING:LEADING_SPACE: please, no spaces at the start of a line #32: FILE: drivers/gpu/drm/i915/display/intel_atomic_plane.c:189:
+ {$
-:157: WARNING:LONG_LINE: line over 100 characters #157: FILE: drivers/gpu/drm/i915/display/intel_display.c:11872:
+ for_each_oldnew_intel_plane_in_state(state, plane, old_plane_state, new_plane_state, i) {
total: 1 errors, 2 warnings, 0 checks, 242 lines checked dfcb59743ad5 drm/i915: Program planes in bigjoiner mode. -:49: WARNING:LONG_LINE: line over 100 characters
#49: FILE: drivers/gpu/drm/i915/display/intel_atomic_plane.c:395:
+ intel_atomic_get_new_plane_state(state, new_plane_state->bigjoiner_plane);
total: 0 errors, 1 warnings, 0 checks, 77 lines checked a4c555a8c16c drm/i915: Add intel_update_bigjoiner handling. -:51: WARNING:LONG_LINE: line over 100 characters #51: FILE: drivers/gpu/drm/i915/display/intel_display.c:14331:
+ drm_calc_timestamping_constants(&slave->base, &new_slave_crtc_state->hw.transcoder_mode);
total: 0 errors, 1 warnings, 0 checks, 223 lines checked fda4e645a05a drm/i915: Disable FBC in bigjoiner configuration. b38045c74b32 drm/i915: Prepare atomic plane check for bigjoiner planes -:35: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #35: FILE: drivers/gpu/drm/i915/display/intel_atomic.c:301:
+ if (plane_state && (plane_state->linked_plane ||
+ (!plane_state->bigjoiner_slave && plane_state->base.fb &&
-:82: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #82: FILE: drivers/gpu/drm/i915/display/intel_atomic_plane.c:164:
+ intel_atomic_get_old_plane_state(state,
+ old_plane_state->bigjoiner_plane);
-:87: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #87: FILE: drivers/gpu/drm/i915/display/intel_atomic_plane.c:169:
+ intel_atomic_get_new_plane_state(state,
+ new_plane_state->bigjoiner_plane);
-:124: CHECK:LINE_SPACING: Please don't use multiple blank lines #124: FILE: drivers/gpu/drm/i915/display/intel_atomic_plane.c:462:
+
-:360: WARNING:LONG_LINE: line over 100 characters #360: FILE: drivers/gpu/drm/i915/display/intel_display.c:3394:
+ aux_offset = intel_plane_adjust_aligned_offset(&x, &y, master_plane_state, plane_state, 1,
-:394: WARNING:LONG_LINE: line over 100 characters #394: FILE: drivers/gpu/drm/i915/display/intel_display.c:3452:
+ offset = intel_plane_adjust_aligned_offset(&x, &y, master_plane_state, plane_state, 0,
-:403: WARNING:LONG_LINE: line over 100 characters #403: FILE: drivers/gpu/drm/i915/display/intel_display.c:3470:
+ offset = intel_plane_adjust_aligned_offset(&x, &y, master_plane_state, plane_state, 0,
-:412: WARNING:LONG_LINE: line over 100 characters #412: FILE: drivers/gpu/drm/i915/display/intel_display.c:3480:
+ while (!skl_check_main_ccs_coordinates(master_plane_state, plane_state, x, y, offset)) {
-:417: WARNING:LONG_LINE: line over 100 characters #417: FILE: drivers/gpu/drm/i915/display/intel_display.c:3484:
+ offset = intel_plane_adjust_aligned_offset(&x, &y, master_plane_state, plane_state, 0,
total: 0 errors, 5 warnings, 4 checks, 955 lines checked 00bf77afbf1c drm/i915: Make prepare_plane_fb() work with bigjoiner planes -:133: WARNING:LONG_LINE: line over 100 characters
#133: FILE: drivers/gpu/drm/i915/display/intel_display.c:15050:
+ intel_atomic_get_new_plane_state(state, new_plane_state->planar_linked_plane);
-:142: WARNING:LONG_LINE: line over 100 characters #142: FILE: drivers/gpu/drm/i915/display/intel_display.c:15065:
+ new_master_plane_state = intel_atomic_get_new_plane_state(state, new_plane_state->bigjoiner_plane);
total: 0 errors, 2 warnings, 0 checks, 167 lines checked2f481b21d19e drm/i915: Make sure watermarks work correctly with bigjoiner as well. -:32: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #32: FILE: drivers/gpu/drm/i915/display/intel_atomic.c:301:
+ if (plane_state && (plane_state->planar_linked_plane ||
(!plane_state->bigjoiner_slave && plane_state->base.fb &&
-:73: ERROR:COMPLEX_MACRO: Macros with complex values should be enclosed in parentheses #73: FILE: drivers/gpu/drm/i915/display/intel_display.h:443:
+#define intel_atomic_crtc_state_for_each_plane_state( \
+ plane, master_plane_state, plane_state, \
+ crtc_state) \
+ for_each_intel_plane_mask(((crtc_state)->uapi.state->dev), (plane), \
+ (((crtc_state)->bigjoiner_slave ? \
+ intel_atomic_get_new_crtc_state( \
+ to_intel_atomic_state((crtc_state)->uapi.state), \
+ (crtc_state)->bigjoiner_linked_crtc) : \
+ (crtc_state))->uapi.plane_mask)) \
+ for_each_if ((((master_plane_state) = \
+ to_intel_plane_state(__drm_atomic_get_current_plane_state((crtc_state)->uapi.state, &plane->base))), \
+ ((plane) = (master_plane_state)->bigjoiner_slave ? \
+ (master_plane_state)->bigjoiner_plane : \
+ (plane)), \
+ ((plane_state) = (master_plane_state)->bigjoiner_slave ? \
+ to_intel_plane_state(__drm_atomic_get_current_plane_state((crtc_state)->uapi.state, &plane->base)) : \
+ (master_plane_state))))
-:73: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'plane' - possible side-effects? #73: FILE: drivers/gpu/drm/i915/display/intel_display.h:443:
+#define intel_atomic_crtc_state_for_each_plane_state( \
+ plane, master_plane_state, plane_state, \
+ crtc_state) \
+ for_each_intel_plane_mask(((crtc_state)->uapi.state->dev), (plane), \
+ (((crtc_state)->bigjoiner_slave ? \
+ intel_atomic_get_new_crtc_state( \
+ to_intel_atomic_state((crtc_state)->uapi.state), \
+ (crtc_state)->bigjoiner_linked_crtc) : \
+ (crtc_state))->uapi.plane_mask)) \
+ for_each_if ((((master_plane_state) = \
+ to_intel_plane_state(__drm_atomic_get_current_plane_state((crtc_state)->uapi.state, &plane->base))), \
+ ((plane) = (master_plane_state)->bigjoiner_slave ? \
+ (master_plane_state)->bigjoiner_plane : \
+ (plane)), \
+ ((plane_state) = (master_plane_state)->bigjoiner_slave ? \
+ to_intel_plane_state(__drm_atomic_get_current_plane_state((crtc_state)->uapi.state, &plane->base)) : \
+ (master_plane_state))))
-:73: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'master_plane_state' - possible side-effects? #73: FILE: drivers/gpu/drm/i915/display/intel_display.h:443:
+#define intel_atomic_crtc_state_for_each_plane_state( \
+ plane, master_plane_state, plane_state, \
+ crtc_state) \
+ for_each_intel_plane_mask(((crtc_state)->uapi.state->dev), (plane), \
+ (((crtc_state)->bigjoiner_slave ? \
+ intel_atomic_get_new_crtc_state( \
+ to_intel_atomic_state((crtc_state)->uapi.state), \
+ (crtc_state)->bigjoiner_linked_crtc) : \
+ (crtc_state))->uapi.plane_mask)) \
+ for_each_if ((((master_plane_state) = \
+ to_intel_plane_state(__drm_atomic_get_current_plane_state((crtc_state)->uapi.state, &plane->base))), \
+ ((plane) = (master_plane_state)->bigjoiner_slave ? \
+ (master_plane_state)->bigjoiner_plane : \
+ (plane)), \
+ ((plane_state) = (master_plane_state)->bigjoiner_slave ? \
+ to_intel_plane_state(__drm_atomic_get_current_plane_state((crtc_state)->uapi.state, &plane->base)) : \
+ (master_plane_state))))
-:73: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'crtc_state' - possible side-effects? #73: FILE: drivers/gpu/drm/i915/display/intel_display.h:443:
+#define intel_atomic_crtc_state_for_each_plane_state( \
+ plane, master_plane_state, plane_state, \
+ crtc_state) \
+ for_each_intel_plane_mask(((crtc_state)->uapi.state->dev), (plane), \
+ (((crtc_state)->bigjoiner_slave ? \
+ intel_atomic_get_new_crtc_state( \
+ to_intel_atomic_state((crtc_state)->uapi.state), \
+ (crtc_state)->bigjoiner_linked_crtc) : \
+ (crtc_state))->uapi.plane_mask)) \
+ for_each_if ((((master_plane_state) = \
+ to_intel_plane_state(__drm_atomic_get_current_plane_state((crtc_state)->uapi.state, &plane->base))), \
+ ((plane) = (master_plane_state)->bigjoiner_slave ? \
+ (master_plane_state)->bigjoiner_plane : \
+ (plane)), \
+ ((plane_state) = (master_plane_state)->bigjoiner_slave ? \
+ to_intel_plane_state(__drm_atomic_get_current_plane_state((crtc_state)->uapi.state, &plane->base)) : \
+ (master_plane_state))))
-:82: WARNING:SPACING: space prohibited between function name and open parenthesis '(' #82: FILE: drivers/gpu/drm/i915/display/intel_display.h:452:
+ for_each_if ((((master_plane_state) = \
-:83: WARNING:LONG_LINE: line over 100 characters #83: FILE: drivers/gpu/drm/i915/display/intel_display.h:453:
+ to_intel_plane_state(__drm_atomic_get_current_plane_state((crtc_state)->uapi.state, &plane->base))), \
-:88: WARNING:LONG_LINE: line over 100 characters #88: FILE: drivers/gpu/drm/i915/display/intel_display.h:458:
+ to_intel_plane_state(__drm_atomic_get_current_plane_state((crtc_state)->uapi.state, &plane->base)) : \
-:116: CHECK:COMPARISON_TO_NULL: Comparison to NULL could be written "master_plane_state->base.fb" #116: FILE: drivers/gpu/drm/i915/intel_pm.c:835:
+ return master_plane_state->base.fb != NULL;
-:408: WARNING:TABSTOP: Statements should start on a tabstop #408: FILE: drivers/gpu/drm/i915/intel_pm.c:4333:
+ }
-:466: WARNING:LONG_LINE: line over 100 characters #466: FILE: drivers/gpu/drm/i915/intel_pm.c:4763:
+ skl_adjusted_plane_pixel_rate(crtc_state, master_plane_state, plane_state),
total: 1 errors, 5 warnings, 5 checks, 522 lines checked 6841b8e381a7 drm/i915: Add debugfs dumping for bigjoiner. -:52: WARNING:LONG_LINE: line over 100 characters #52: FILE: drivers/gpu/drm/i915/i915_debugfs.c:2682:
+ seq_printf(m, "\t--Plane id %d: type=%s, %sclipped crtc="DRM_RECT_FMT", clipped src="DRM_RECT_FP_FMT", format=%s, rotation=%s\n",
-:52: CHECK:CONCATENATED_STRING: Concatenated strings should use spaces between elements #52: FILE: drivers/gpu/drm/i915/i915_debugfs.c:2682:
+ seq_printf(m, "\t--Plane id %d: type=%s, %sclipped crtc="DRM_RECT_FMT", clipped src="DRM_RECT_FP_FMT", format=%s, rotation=%s\n",
total: 0 errors, 1 warnings, 1 checks, 65 lines checked 4fc8d6917d96 HAX to make it work on the icelake test system
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.SPARSE: warning for series starting with [01/23] drm/i915/dp: Fix dsc bpp calculations, v2.
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: series starting with [01/23] drm/i915/dp: Fix dsc bpp calculations, v2.
URL : https://patchwork.freedesktop.org/series/66998/
State : warning
== Summary ==
$ dim sparse origin/drm-tip Sparse version: v0.6.0 Commit: drm/i915/dp: Fix dsc bpp calculations, v2. Okay!
Commit: HAX drm/i915: Disable FEC entirely for now Okay!
Commit: drm/i915: Prepare to split crtc state in uapi and hw state Okay!
Commit: drm/i915: Handle a few more cases for hw/sw split Okay!
Commit: drm/i915: Complete sw/hw split
Okay!
Commit: drm/i915: Get rid of crtc_state->fb_changed Okay!
Commit: drm/i915: Remove begin/finish_crtc_commit. Okay!
Commit: drm/i915: Rename planar linked plane variables Okay!
Commit: drm/i915: Do not add all planes when checking scalers on glk+ Okay!
Commit: drm/i915/dp: Allow big joiner modes in intel_dp_mode_valid() Okay!
Commit: drm/i915: Try to make bigjoiner work in atomic check. Okay!
Commit: drm/i915: Enable big joiner support in enable and disable sequences. Okay!
Commit: drm/i915: Make hardware readout work on i915. Okay!
Commit: drm/i915: Prepare update_slave() for bigjoiner plane updates Okay!
Commit: drm/i915: Link planes in a bigjoiner configuration. Okay!
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for series starting with [01/23] drm/i915/dp: Fix dsc bpp calculations, v2.
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: series starting with [01/23] drm/i915/dp: Fix dsc bpp calculations, v2.
URL : https://patchwork.freedesktop.org/series/66998/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_6928 -> Patchwork_14476
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/
Known issues
------------
Here are the changes found in Patchwork_14476 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@i915_module_load@reload:
- fi-icl-u3: [PASS][1] -> [DMESG-WARN][2] ([fdo#107724] / [fdo#111214])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/fi-icl-u3/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/fi-icl-u3/igt@[email protected]
* igt@kms_chamelium@hdmi-hpd-fast:
- fi-kbl-7500u: [PASS][3] -> [FAIL][4] ([fdo#111407])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/fi-kbl-7500u/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/fi-kbl-7500u/igt@[email protected]
#### Possible fixes ####
* igt@gem_ctx_switch@legacy-render:
- fi-icl-u2: [INCOMPLETE][5] ([fdo#107713] / [fdo#111381]) -> [PASS][6]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/fi-icl-u2/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/fi-icl-u2/igt@[email protected]
* igt@i915_module_load@reload:
- fi-blb-e6850: [INCOMPLETE][7] ([fdo#107718]) -> [PASS][8]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/fi-blb-e6850/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/fi-blb-e6850/igt@[email protected]
* igt@kms_addfb_basic@addfb25-x-tiled:
- fi-icl-u3: [DMESG-WARN][9] ([fdo#107724]) -> [PASS][10] +1 similar issue
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/fi-icl-u3/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/fi-icl-u3/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#105763]: https://bugs.freedesktop.org/show_bug.cgi?id=105763
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
[fdo#107724]: https://bugs.freedesktop.org/show_bug.cgi?id=107724
[fdo#111214]: https://bugs.freedesktop.org/show_bug.cgi?id=111214
[fdo#111381]: https://bugs.freedesktop.org/show_bug.cgi?id=111381
[fdo#111407]: https://bugs.freedesktop.org/show_bug.cgi?id=111407
Participating hosts (54 -> 45)
------------------------------
Additional (1): fi-hsw-4770r
Missing (10): fi-ilk-m540 fi-bxt-dsi fi-hsw-4200u fi-glk-dsi fi-byt-squawks fi-bsw-cyan fi-pnv-d510 fi-icl-y fi-byt-clapper fi-bdw-samus
Build changes
-------------
* CI: CI-20190529 -> None
* Linux: CI_DRM_6928 -> Patchwork_14476
CI-20190529: 20190529
CI_DRM_6928: 74bb5b031ca11c7036f7be21f42a73a057fc8da8 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5194: 531d3d02d5e7a2a84d61b92b28fa01b822afc399 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_14476: 4fc8d6917d9641566f066833c6cd4a367858864a @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
4fc8d6917d96 HAX to make it work on the icelake test system 6841b8e381a7 drm/i915: Add debugfs dumping for bigjoiner. 2f481b21d19e drm/i915: Make sure watermarks work correctly with bigjoiner as well. 00bf77afbf1c drm/i915: Make prepare_plane_fb() work with bigjoiner planes b38045c74b32 drm/i915: Prepare atomic plane check for bigjoiner planes fda4e645a05a drm/i915: Disable FBC in bigjoiner configuration. a4c555a8c16c drm/i915: Add intel_update_bigjoiner handling. dfcb59743ad5 drm/i915: Program planes in bigjoiner mode.5c48f75472bd drm/i915: Link planes in a bigjoiner configuration. 87f053dd9d78 drm/i915: Prepare update_slave() for bigjoiner plane updates 0334bd232823 drm/i915: Make hardware readout work on i915. fe1d38cc6ac9 drm/i915: Enable big joiner support in enable and disable sequences. 02ae546be7ff drm/i915: Try to make bigjoiner work in atomic check. c5ac35a82acd drm/i915/dp: Allow big joiner modes in intel_dp_mode_valid() 11b08875cb14 drm/i915: Do not add all planes when checking scalers on glk+ 35e0e945926a drm/i915: Rename planar linked plane variables 1997dbaaa507 drm/i915: Remove begin/finish_crtc_commit.89bdbc955927 drm/i915: Get rid of crtc_state->fb_changedfb10f9c4dae1 drm/i915: Complete sw/hw split8fa117d4a277 drm/i915: Handle a few more cases for hw/sw split 2bb73b0ec47e drm/i915: Prepare to split crtc state in uapi and hw state 30142b729b5c HAX drm/i915: Disable FEC entirely for now5a06a0350a83 drm/i915/dp: Fix dsc bpp calculations, v2.
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/index.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 59 lines · Maarten Lankhorst
There was a integer wraparound when
mode_clockbecame too high, and we didn't correct for the FEC overhead factor when dividing, with the calculations breaking at HBR3.As a result our calculated bpp was way too high, and the link width limitation never came into effect.
Print out the resulting bpp calcululations as a sanity check, just in case we ever have to debug it later on again.
We also used the wrong factor for FEC. While bspec mentions 2.4%, all the calculations use 1/0.972261, and the same ratio should be applied to data M/N as well, so use it there when FEC is enabled.
Make sure we don't break hw readout, and read out FEC enable state and correct the DDI clock readout for the new values.
Together with the next commit, this causes FEC to work correctly with big joiner, while also having the correct refresh rate reported in kms_setmode.basic.
Signed-off-by Maarten Lankhorst <[email protected]>Fixes d9218c8f6cf4 ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC")Cc <[email protected]> # v5.0+Cc Manasi Navare <[email protected]>--- drivers/gpu/drm/i915/display/intel_ddi.c | 19 +- drivers/gpu/drm/i915/display/intel_display.c | 1 + drivers/gpu/drm/i915/display/intel_dp.c | 195 ++++++++++--------- drivers/gpu/drm/i915/display/intel_dp.h | 6 +- 4 files changed, 128 insertions(+), 93 deletions(-)drivers/gpu/drm/i915/display/intel_ddi.c +7
-1@@ -1479,6 +1479,10 @@ static void ddi_dotclock_get(struct intel_crtc_state *pipe_config)if (pipe_config->pixel_multiplier) dotclock /= pipe_config->pixel_multiplier; +/* fec adds overhead to the data M/N values, correct for it */ +if (pipe_config->fec_enable) + dotclock =intel_dp_fec_to_mode_clock (dotclock); + pipe_config->base.adjusted_mode.crtc_clock = dotclock; }@@ -4031,7 +4035,9 @@ void intel_ddi_get_config(struct intel_encoder *encoder,case TRANS_DDI_MODE_SELECT_FDI : pipe_config->output_types |=BIT (INTEL_OUTPUT_ANALOG );break ; -case TRANS_DDI_MODE_SELECT_DP_SST : +case TRANS_DDI_MODE_SELECT_DP_SST : { +struct intel_dp *intel_dp =enc_to_intel_dp (&encoder->base); +if (encoder->type ==INTEL_OUTPUT_EDP ) pipe_config->output_types |=BIT (INTEL_OUTPUT_EDP );else
drivers/gpu/drm/i915/display/intel_ddi.c void intel_ddi_get_config(struct intel_encoder *encoder, · line 4052
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_ddi.c +5
-0@@ -4039,7 +4045,18 @@ void intel_ddi_get_config(struct intel_encoder *encoder, pipe_config->lane_count = ((temp &DDI_PORT_WIDTH_MASK ) >>DDI_PORT_WIDTH_SHIFT ) +1 ;intel_dp_get_m_n (intel_crtc, pipe_config); + +if (INTEL_GEN (dev_priv) >=11 ) { + pipe_config->fec_enable = +I915_READ (intel_dp->regs.dp_tp_ctl) & +DP_TP_CTL_FEC_ENABLE ;
Side note: That looks broken for the init/resume readout. I knew there was a reason I didn't quite like the idea of intel_dp->regs...
Quoted 151 lines
drivers/gpu/drm/i915/display/intel_ddi.c +6
-0+DRM_DEBUG_KMS ("[ENCODER:%d:%s] Fec status: %u\n" , + encoder->base.base.id, encoder->base.name, + pipe_config->fec_enable); + } +break ; + }case TRANS_DDI_MODE_SELECT_DP_MST : pipe_config->output_types |=BIT (INTEL_OUTPUT_DP_MST ); pipe_config->lane_count =drivers/gpu/drm/i915/display/intel_display.c +1
-0@@ -12773,6 +12773,7 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,PIPE_CONF_CHECK_BOOL (hdmi_scrambling);PIPE_CONF_CHECK_BOOL (hdmi_high_tmds_clock_ratio);PIPE_CONF_CHECK_BOOL (has_infoframe); +PIPE_CONF_CHECK_BOOL (fec_enable);PIPE_CONF_CHECK_BOOL_INCOMPLETE (has_audio);drivers/gpu/drm/i915/display/intel_dp.c +101
-2@@ -76,8 +76,8 @@#define DP_DSC_MAX_ENC_THROUGHPUT_0 340000#define DP_DSC_MAX_ENC_THROUGHPUT_1 400000 -/* DP DSC FEC Overhead factor = (100 - 2.4)/100 */ -#define DP_DSC_FEC_OVERHEAD_FACTOR 976 +/* DP DSC FEC Overhead factor = 1/(0.972261) */ +#define DP_DSC_FEC_OVERHEAD_FACTOR 972261/* Compliance test status bits */ #define INTEL_DP_RESOLUTION_SHIFT_MASK 0@@ -492,6 +492,104 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,return 0 ; } +static inline u32 intel_dp_mode_to_fec_clock (u32 mode_clock) +{ +return div_u64 (mul_u32_u32 (mode_clock,1000000U ), +DP_DSC_FEC_OVERHEAD_FACTOR ); +} + +u32 intel_dp_fec_to_mode_clock (u32 fec_clock) +{ +return div_u64 (mul_u32_u32 (fec_clock, +DP_DSC_FEC_OVERHEAD_FACTOR ), +1000000U ); +} + +static u16 intel_dp_dsc_get_output_bpp (u32 link_clock,u32 lane_count, +u32 mode_clock,u32 mode_hdisplay) +{ +u32 bits_per_pixel, max_bpp_small_joiner_ram; +int i; + +/* +* Available Link Bandwidth(Kbits/sec) = (NumberOfLanes)* +* (LinkSymbolClock)* 8 * (TimeSlotsPerMTP) +* for SST -> TimeSlotsPerMTP is 1, +* for MST -> TimeSlotsPerMTP has to be calculated +*/ + bits_per_pixel = (link_clock * lane_count *8 ) / +intel_dp_mode_to_fec_clock (mode_clock); +DRM_DEBUG_KMS ("Max link bpp: %u\n" , bits_per_pixel); + +/* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */ + max_bpp_small_joiner_ram =DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER / mode_hdisplay; +DRM_DEBUG_KMS ("Max small joiner bpp: %u\n" , max_bpp_small_joiner_ram); + +/* +* Greatest allowed DSC BPP = MIN (output BPP from available Link BW +* check, output bpp from small joiner RAM check) +*/ + bits_per_pixel =min (bits_per_pixel, max_bpp_small_joiner_ram); + +/* Error out if the max bpp is less than smallest allowed valid bpp */ +if (bits_per_pixel < valid_dsc_bpp[0 ]) { +DRM_DEBUG_KMS ("Unsupported BPP %u, min %u\n" , + bits_per_pixel, valid_dsc_bpp[0 ]); +return 0 ; + } + +/* Find the nearest match in the array of known BPPs from VESA */ +for (i =0 ; i <ARRAY_SIZE (valid_dsc_bpp) -1 ; i++) { +if (bits_per_pixel < valid_dsc_bpp[i +1 ]) +break ; + } + bits_per_pixel = valid_dsc_bpp[i]; + +/* +* Compressed BPP in U6.4 format so multiply by 16, for Gen 11, +* fractional part is 0 +*/ +return bits_per_pixel <<4 ; +} + +static u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp, +int mode_clock,int mode_hdisplay) +{ +u8 min_slice_count, i; +int max_slice_width; + +if (mode_clock <=DP_DSC_PEAK_PIXEL_RATE ) + min_slice_count =DIV_ROUND_UP (mode_clock, +DP_DSC_MAX_ENC_THROUGHPUT_0 ); +else + min_slice_count =DIV_ROUND_UP (mode_clock, +DP_DSC_MAX_ENC_THROUGHPUT_1 ); + + max_slice_width =drm_dp_dsc_sink_max_slice_width (intel_dp->dsc_dpcd); +if (max_slice_width <DP_DSC_MIN_SLICE_WIDTH_VALUE ) { +DRM_DEBUG_KMS ("Unsupported slice width %d by DP DSC Sink device\n" , + max_slice_width); +return 0 ; + } +/* Also take into account max slice width */ + min_slice_count =min_t (u8, min_slice_count, +DIV_ROUND_UP (mode_hdisplay, + max_slice_width)); + +/* Find the closest match to the valid slice count values */ +for (i =0 ; i <ARRAY_SIZE (valid_dsc_slicecount); i++) { +if (valid_dsc_slicecount[i] > +drm_dp_dsc_sink_max_slice_count (intel_dp->dsc_dpcd, + false)) +break ; +if (min_slice_count <= valid_dsc_slicecount[i]) +return valid_dsc_slicecount[i]; + } + +DRM_DEBUG_KMS ("Unsupported Slice Count %d\n" , min_slice_count); +return 0 ; +} +static enum drm_mode_status intel_dp_mode_valid (struct drm_connector *connector,struct drm_display_mode *mode)@@ -2182,6 +2280,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,bool constant_n =drm_dp_has_quirk (&intel_dp->desc,DP_DPCD_QUIRK_CONSTANT_N );int ret =0 , output_bpp; +u32 data_clock;if (HAS_PCH_SPLIT (dev_priv) && !HAS_DDI (dev_priv) && port !=PORT_A ) pipe_config->has_pch_encoder = true;
drivers/gpu/drm/i915/display/intel_dp.c intel_dp_compute_config(struct intel_encoder *encoder, · line 2349
Quoted 7 lines
drivers/gpu/drm/i915/display/intel_dp.c +4
-0@@ -2244,9 +2343,14 @@ intel_dp_compute_config(struct intel_encoder *encoder,else output_bpp =intel_dp_output_bpp (pipe_config, pipe_config->pipe_bpp); +if (pipe_config->fec_enable) + data_clock =intel_dp_mode_to_fec_clock (adjusted_mode->crtc_clock); +else + data_clock = adjusted_mode->crtc_clock;
This looks wrong to me. The link M/N are used the regenerate the stream clock from the link symbol clock. AFAICS the only effect FEC should have is that the overhead may require us to bump the LS clock a bit higher. But the M/N is stil computed simply as the ratio between LS clock and stream clock.
The data M/N do need to account for FEC. I guess that's the problem you're trying to address here?
Quoted 129 lines
drivers/gpu/drm/i915/display/intel_dp.c +2
-86+intel_link_compute_m_n (output_bpp, pipe_config->lane_count, - adjusted_mode->crtc_clock, + data_clock, pipe_config->port_clock, &pipe_config->dp_m_n, constant_n);@@ -4363,91 +4467,6 @@ intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8 *sink_irq_vector)DP_DPRX_ESI_LEN ; } -u16 intel_dp_dsc_get_output_bpp (int link_clock,u8 lane_count, -int mode_clock,int mode_hdisplay) -{ -u16 bits_per_pixel, max_bpp_small_joiner_ram; -int i; - -/* -* Available Link Bandwidth(Kbits/sec) = (NumberOfLanes)* -* (LinkSymbolClock)* 8 * ((100-FECOverhead)/100)*(TimeSlotsPerMTP) -* FECOverhead = 2.4%, for SST -> TimeSlotsPerMTP is 1, -* for MST -> TimeSlotsPerMTP has to be calculated -*/ - bits_per_pixel = (link_clock * lane_count *8 * -DP_DSC_FEC_OVERHEAD_FACTOR ) / - mode_clock; - -/* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */ - max_bpp_small_joiner_ram =DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER / - mode_hdisplay; - -/* -* Greatest allowed DSC BPP = MIN (output BPP from avaialble Link BW -* check, output bpp from small joiner RAM check) -*/ - bits_per_pixel =min (bits_per_pixel, max_bpp_small_joiner_ram); - -/* Error out if the max bpp is less than smallest allowed valid bpp */ -if (bits_per_pixel < valid_dsc_bpp[0 ]) { -DRM_DEBUG_KMS ("Unsupported BPP %d\n" , bits_per_pixel); -return 0 ; - } - -/* Find the nearest match in the array of known BPPs from VESA */ -for (i =0 ; i <ARRAY_SIZE (valid_dsc_bpp) -1 ; i++) { -if (bits_per_pixel < valid_dsc_bpp[i +1 ]) -break ; - } - bits_per_pixel = valid_dsc_bpp[i]; - -/* -* Compressed BPP in U6.4 format so multiply by 16, for Gen 11, -* fractional part is 0 -*/ -return bits_per_pixel <<4 ; -} - -u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp, -int mode_clock, -int mode_hdisplay) -{ -u8 min_slice_count, i; -int max_slice_width; - -if (mode_clock <=DP_DSC_PEAK_PIXEL_RATE ) - min_slice_count =DIV_ROUND_UP (mode_clock, -DP_DSC_MAX_ENC_THROUGHPUT_0 ); -else - min_slice_count =DIV_ROUND_UP (mode_clock, -DP_DSC_MAX_ENC_THROUGHPUT_1 ); - - max_slice_width =drm_dp_dsc_sink_max_slice_width (intel_dp->dsc_dpcd); -if (max_slice_width <DP_DSC_MIN_SLICE_WIDTH_VALUE ) { -DRM_DEBUG_KMS ("Unsupported slice width %d by DP DSC Sink device\n" , - max_slice_width); -return 0 ; - } -/* Also take into account max slice width */ - min_slice_count =min_t (u8, min_slice_count, -DIV_ROUND_UP (mode_hdisplay, - max_slice_width)); - -/* Find the closest match to the valid slice count values */ -for (i =0 ; i <ARRAY_SIZE (valid_dsc_slicecount); i++) { -if (valid_dsc_slicecount[i] > -drm_dp_dsc_sink_max_slice_count (intel_dp->dsc_dpcd, - false)) -break ; -if (min_slice_count <= valid_dsc_slicecount[i]) -return valid_dsc_slicecount[i]; - } - -DRM_DEBUG_KMS ("Unsupported Slice Count %d\n" , min_slice_count); -return 0 ; -} -static void intel_pixel_encoding_setup_vsc (struct intel_dp *intel_dp,const struct intel_crtc_state *crtc_state)drivers/gpu/drm/i915/display/intel_dp.h +2
-4@@ -103,10 +103,6 @@ bool intel_dp_source_supports_hbr2(struct intel_dp *intel_dp);bool intel_dp_source_supports_hbr3 (struct intel_dp *intel_dp);bool intel_dp_get_link_status (struct intel_dp *intel_dp,u8 *link_status); -u16 intel_dp_dsc_get_output_bpp (int link_clock,u8 lane_count, -int mode_clock,int mode_hdisplay); -u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp,int mode_clock, -int mode_hdisplay);bool intel_dp_read_dpcd (struct intel_dp *intel_dp);bool intel_dp_get_colorimetry_status (struct intel_dp *intel_dp);@@ -119,4 +115,6 @@ static inline unsigned int intel_dp_unused_lane_mask(int lane_count) return ~((1 << lane_count) - 1) & 0xf; } +u32 intel_dp_fec_to_mode_clock (u32 fec_clock); +#endif /* __INTEL_DP_H__ */ Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 2 lines
Ville Syrjälä Intel
Maarten Lankhorst
maintainerPATCH 1/1 drm/i915/dp: Fix dsc bpp calculations, v3.
There was a integer wraparound when mode_clock became too high, and we didn't correct for the FEC overhead factor when dividing, with the calculations breaking at HBR3.
As a result our calculated bpp was way too high, and the link width limitation never came into effect.
Print out the resulting bpp calcululations as a sanity check, just in case we ever have to debug it later on again.
We also used the wrong factor for FEC. While bspec mentions 2.4%, all the calculations use 1/0.972261, and the same ratio should be applied to data M/N as well, so use it there when FEC is enabled.
Make sure we don't break hw readout, and read out FEC enable state and correct the DDI clock readout for the new values.
This fixes the FIFO underrun we are seeing with FEC enabled.
Changes since v2:
- Handle fec_enable in intel_link_compute_m_n, so only data M/N is adjusted. (Ville)
- Fix initial hardware readout for FEC. (Ville)
---
Thanks, that fixed the FIFO underrun, making the disablement patch obsolete. Bigjoiner is now completely working as intended. :)
drivers/gpu/drm/i915/display/intel_ddi.c | 21 ++ drivers/gpu/drm/i915/display/intel_display.c | 13 +- drivers/gpu/drm/i915/display/intel_display.h | 2 +- drivers/gpu/drm/i915/display/intel_dp.c | 191 ++++++++++--------- drivers/gpu/drm/i915/display/intel_dp.h | 7 +- drivers/gpu/drm/i915/display/intel_dp_mst.c | 2 +- 6 files changed, 137 insertions(+), 99 deletions(-)
drivers/gpu/drm/i915/display/intel_ddi.c +21 -0
@@ -1479,6 +1479,10 @@ static void ddi_dotclock_get(struct intel_crtc_state *pipe_config)if (pipe_config->pixel_multiplier) dotclock /= pipe_config->pixel_multiplier; +/* fec adds overhead to the data M/N values, correct for it */ +if (pipe_config->fec_enable) + dotclock =intel_dp_fec_to_mode_clock (dotclock); + pipe_config->base.adjusted_mode.crtc_clock = dotclock; }
@@ -4045,6 +4049,23 @@ void intel_ddi_get_config(struct intel_encoder *encoder, pipe_config->lane_count = ((temp &DDI_PORT_WIDTH_MASK ) >>DDI_PORT_WIDTH_SHIFT ) +1 ;intel_dp_get_m_n (intel_crtc, pipe_config); + +if (INTEL_GEN (dev_priv) >=11 ) { +i915_reg_t dp_tp_ctl; + +if (IS_GEN (dev_priv,11 )) + dp_tp_ctl =DP_TP_CTL (pipe_config->cpu_transcoder); +else + dp_tp_ctl =TGL_DP_TP_CTL (pipe_config->cpu_transcoder); + + pipe_config->fec_enable = +I915_READ (dp_tp_ctl) &DP_TP_CTL_FEC_ENABLE ; + +DRM_DEBUG_KMS ("[ENCODER:%d:%s] Fec status: %u\n" , + encoder->base.base.id, encoder->base.name, + pipe_config->fec_enable); + } +break ;case TRANS_DDI_MODE_SELECT_DP_MST : pipe_config->output_types |=BIT (INTEL_OUTPUT_DP_MST );
drivers/gpu/drm/i915/display/intel_display.c +9 -4
@@ -7291,7 +7291,7 @@ static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc, pipe_config->fdi_lanes = lane;intel_link_compute_m_n (pipe_config->pipe_bpp, lane, fdi_dotclock, - link_bw, &pipe_config->fdi_m_n, false); + link_bw, &pipe_config->fdi_m_n, false, false); ret =ironlake_check_fdi_lanes (dev, intel_crtc->pipe, pipe_config);if (ret == -EDEADLK )
@@ -7538,11 +7538,15 @@ void intel_link_compute_m_n(u16 bits_per_pixel, int nlanes, int pixel_clock, int link_clock, struct intel_link_m_n *m_n, - bool constant_n) + bool constant_n, bool fec_enable) { - m_n->tu = 64; + u32 data_clock = bits_per_pixel * pixel_clock; + +if (fec_enable) + data_clock =intel_dp_mode_to_fec_clock (data_clock); -compute_m_n (bits_per_pixel * pixel_clock, + m_n->tu =64 ; +compute_m_n (data_clock, link_clock * nlanes *8 , &m_n->gmch_m, &m_n->gmch_n, constant_n);
@@ -12832,6 +12836,7 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,PIPE_CONF_CHECK_BOOL (hdmi_scrambling);PIPE_CONF_CHECK_BOOL (hdmi_high_tmds_clock_ratio);PIPE_CONF_CHECK_BOOL (has_infoframe); +PIPE_CONF_CHECK_BOOL (fec_enable);PIPE_CONF_CHECK_BOOL_INCOMPLETE (has_audio);
drivers/gpu/drm/i915/display/intel_display.h +1 -1
@@ -443,7 +443,7 @@ enum phy_fia {void intel_link_compute_m_n (u16 bpp,int nlanes,int pixel_clock,int link_clock,struct intel_link_m_n *m_n, -bool constant_n); +bool constant_n,bool fec_enable);bool is_ccs_modifier (u64 modifier);void lpt_disable_clkout_dp (struct drm_i915_private *dev_priv); u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,
drivers/gpu/drm/i915/display/intel_dp.c +102 -89
221 lines not on this page · raw message
drivers/gpu/drm/i915/display/intel_dp.h +3 -4
@@ -103,10 +103,6 @@ bool intel_dp_source_supports_hbr2(struct intel_dp *intel_dp);bool intel_dp_source_supports_hbr3 (struct intel_dp *intel_dp);bool intel_dp_get_link_status (struct intel_dp *intel_dp,u8 *link_status); -u16 intel_dp_dsc_get_output_bpp (int link_clock,u8 lane_count, -int mode_clock,int mode_hdisplay); -u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp,int mode_clock, -int mode_hdisplay);bool intel_dp_read_dpcd (struct intel_dp *intel_dp);bool intel_dp_get_colorimetry_status (struct intel_dp *intel_dp);
@@ -119,4 +115,7 @@ static inline unsigned int intel_dp_unused_lane_mask(int lane_count) return ~((1 << lane_count) - 1) & 0xf; } +u32 intel_dp_fec_to_mode_clock (u32 fec_clock); +u32 intel_dp_mode_to_fec_clock (u32 mode_clock); +#endif /* __INTEL_DP_H__ */
drivers/gpu/drm/i915/display/intel_dp_mst.c +1 -1
@@ -81,7 +81,7 @@ static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder, adjusted_mode->crtc_clock, crtc_state->port_clock, &crtc_state->dp_m_n, - constant_n); + constant_n, crtc_state->fec_enable); crtc_state->dp_m_n.tu = slots;return 0 ;
Signature · 1 line
2.20.1
Re: [PATCH] drm/i915/dp: Fix dsc bpp calculations, v3.
Quoted 44 lines · Maarten Lankhorst
There was a integer wraparound when
mode_clockbecame too high, and we didn't correct for the FEC overhead factor when dividing, with the calculations breaking at HBR3.As a result our calculated bpp was way too high, and the link width limitation never came into effect.
Print out the resulting bpp calcululations as a sanity check, just in case we ever have to debug it later on again.
We also used the wrong factor for FEC. While bspec mentions 2.4%, all the calculations use 1/0.972261, and the same ratio should be applied to data M/N as well, so use it there when FEC is enabled.
Make sure we don't break hw readout, and read out FEC enable state and correct the DDI clock readout for the new values.
This fixes the FIFO underrun we are seeing with FEC enabled.
Changes since v2:
- Handlefec_enableinintel_link_compute_m_n, so only data M/N is adjusted. (Ville)
- Fix initial hardware readout for FEC. (Ville)Signed-off-by Maarten Lankhorst <[email protected]>Fixes d9218c8f6cf4 ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC")Cc <[email protected]> # v5.0+Cc Manasi Navare <[email protected]>---
Thanks, that fixed the FIFO underrun, making the disablement patch obsolete. Bigjoiner is now completely working as intended. :)drivers/gpu/drm/i915/display/intel_ddi.c | 21 ++ drivers/gpu/drm/i915/display/intel_display.c | 13 +- drivers/gpu/drm/i915/display/intel_display.h | 2 +- drivers/gpu/drm/i915/display/intel_dp.c | 191 ++++++++++--------- drivers/gpu/drm/i915/display/intel_dp.h | 7 +- drivers/gpu/drm/i915/display/intel_dp_mst.c | 2 +- 6 files changed, 137 insertions(+), 99 deletions(-)drivers/gpu/drm/i915/display/intel_ddi.c +0
-0
drivers/gpu/drm/i915/display/intel_ddi.c static void ddi_dotclock_get(struct intel_crtc_state *pipe_config) · line 1484
Quoted 6 lines
drivers/gpu/drm/i915/display/intel_ddi.c +3
-0@@ -1479,6 +1479,10 @@ static void ddi_dotclock_get(struct intel_crtc_state *pipe_config)if (pipe_config->pixel_multiplier) dotclock /= pipe_config->pixel_multiplier; +/* fec adds overhead to the data M/N values, correct for it */ +if (pipe_config->fec_enable) + dotclock =intel_dp_fec_to_mode_clock (dotclock);
That's still nonsense.
Quoted 349 lines
drivers/gpu/drm/i915/display/intel_ddi.c +18
-0+ pipe_config->base.adjusted_mode.crtc_clock = dotclock; }@@ -4045,6 +4049,23 @@ void intel_ddi_get_config(struct intel_encoder *encoder, pipe_config->lane_count = ((temp &DDI_PORT_WIDTH_MASK ) >>DDI_PORT_WIDTH_SHIFT ) +1 ;intel_dp_get_m_n (intel_crtc, pipe_config); + +if (INTEL_GEN (dev_priv) >=11 ) { +i915_reg_t dp_tp_ctl; + +if (IS_GEN (dev_priv,11 )) + dp_tp_ctl =DP_TP_CTL (pipe_config->cpu_transcoder); +else + dp_tp_ctl =TGL_DP_TP_CTL (pipe_config->cpu_transcoder); + + pipe_config->fec_enable = +I915_READ (dp_tp_ctl) &DP_TP_CTL_FEC_ENABLE ; + +DRM_DEBUG_KMS ("[ENCODER:%d:%s] Fec status: %u\n" , + encoder->base.base.id, encoder->base.name, + pipe_config->fec_enable); + } +break ;case TRANS_DDI_MODE_SELECT_DP_MST : pipe_config->output_types |=BIT (INTEL_OUTPUT_DP_MST );drivers/gpu/drm/i915/display/intel_display.c +9
-4@@ -7291,7 +7291,7 @@ static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc, pipe_config->fdi_lanes = lane;intel_link_compute_m_n (pipe_config->pipe_bpp, lane, fdi_dotclock, - link_bw, &pipe_config->fdi_m_n, false); + link_bw, &pipe_config->fdi_m_n, false, false); ret =ironlake_check_fdi_lanes (dev, intel_crtc->pipe, pipe_config);if (ret == -EDEADLK )@@ -7538,11 +7538,15 @@ void intel_link_compute_m_n(u16 bits_per_pixel, int nlanes, int pixel_clock, int link_clock, struct intel_link_m_n *m_n, - bool constant_n) + bool constant_n, bool fec_enable) { - m_n->tu = 64; + u32 data_clock = bits_per_pixel * pixel_clock; + +if (fec_enable) + data_clock =intel_dp_mode_to_fec_clock (data_clock); -compute_m_n (bits_per_pixel * pixel_clock, + m_n->tu =64 ; +compute_m_n (data_clock, link_clock * nlanes *8 , &m_n->gmch_m, &m_n->gmch_n, constant_n);@@ -12832,6 +12836,7 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,PIPE_CONF_CHECK_BOOL (hdmi_scrambling);PIPE_CONF_CHECK_BOOL (hdmi_high_tmds_clock_ratio);PIPE_CONF_CHECK_BOOL (has_infoframe); +PIPE_CONF_CHECK_BOOL (fec_enable);PIPE_CONF_CHECK_BOOL_INCOMPLETE (has_audio);drivers/gpu/drm/i915/display/intel_display.h +1
-1@@ -443,7 +443,7 @@ enum phy_fia {void intel_link_compute_m_n (u16 bpp,int nlanes,int pixel_clock,int link_clock,struct intel_link_m_n *m_n, -bool constant_n); +bool constant_n,bool fec_enable);bool is_ccs_modifier (u64 modifier);void lpt_disable_clkout_dp (struct drm_i915_private *dev_priv); u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,drivers/gpu/drm/i915/display/intel_dp.c +102
-89@@ -76,8 +76,8 @@#define DP_DSC_MAX_ENC_THROUGHPUT_0 340000#define DP_DSC_MAX_ENC_THROUGHPUT_1 400000 -/* DP DSC FEC Overhead factor = (100 - 2.4)/100 */ -#define DP_DSC_FEC_OVERHEAD_FACTOR 976 +/* DP DSC FEC Overhead factor = 1/(0.972261) */ +#define DP_DSC_FEC_OVERHEAD_FACTOR 972261/* Compliance test status bits */ #define INTEL_DP_RESOLUTION_SHIFT_MASK 0@@ -492,6 +492,104 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,return 0 ; } +u32 intel_dp_mode_to_fec_clock (u32 mode_clock) +{ +return div_u64 (mul_u32_u32 (mode_clock,1000000U ), +DP_DSC_FEC_OVERHEAD_FACTOR ); +} + +u32 intel_dp_fec_to_mode_clock (u32 fec_clock) +{ +return div_u64 (mul_u32_u32 (fec_clock, +DP_DSC_FEC_OVERHEAD_FACTOR ), +1000000U ); +} + +static u16 intel_dp_dsc_get_output_bpp (u32 link_clock,u32 lane_count, +u32 mode_clock,u32 mode_hdisplay) +{ +u32 bits_per_pixel, max_bpp_small_joiner_ram; +int i; + +/* +* Available Link Bandwidth(Kbits/sec) = (NumberOfLanes)* +* (LinkSymbolClock)* 8 * (TimeSlotsPerMTP) +* for SST -> TimeSlotsPerMTP is 1, +* for MST -> TimeSlotsPerMTP has to be calculated +*/ + bits_per_pixel = (link_clock * lane_count *8 ) / +intel_dp_mode_to_fec_clock (mode_clock); +DRM_DEBUG_KMS ("Max link bpp: %u\n" , bits_per_pixel); + +/* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */ + max_bpp_small_joiner_ram =DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER / mode_hdisplay; +DRM_DEBUG_KMS ("Max small joiner bpp: %u\n" , max_bpp_small_joiner_ram); + +/* +* Greatest allowed DSC BPP = MIN (output BPP from available Link BW +* check, output bpp from small joiner RAM check) +*/ + bits_per_pixel =min (bits_per_pixel, max_bpp_small_joiner_ram); + +/* Error out if the max bpp is less than smallest allowed valid bpp */ +if (bits_per_pixel < valid_dsc_bpp[0 ]) { +DRM_DEBUG_KMS ("Unsupported BPP %u, min %u\n" , + bits_per_pixel, valid_dsc_bpp[0 ]); +return 0 ; + } + +/* Find the nearest match in the array of known BPPs from VESA */ +for (i =0 ; i <ARRAY_SIZE (valid_dsc_bpp) -1 ; i++) { +if (bits_per_pixel < valid_dsc_bpp[i +1 ]) +break ; + } + bits_per_pixel = valid_dsc_bpp[i]; + +/* +* Compressed BPP in U6.4 format so multiply by 16, for Gen 11, +* fractional part is 0 +*/ +return bits_per_pixel <<4 ; +} + +static u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp, +int mode_clock,int mode_hdisplay) +{ +u8 min_slice_count, i; +int max_slice_width; + +if (mode_clock <=DP_DSC_PEAK_PIXEL_RATE ) + min_slice_count =DIV_ROUND_UP (mode_clock, +DP_DSC_MAX_ENC_THROUGHPUT_0 ); +else + min_slice_count =DIV_ROUND_UP (mode_clock, +DP_DSC_MAX_ENC_THROUGHPUT_1 ); + + max_slice_width =drm_dp_dsc_sink_max_slice_width (intel_dp->dsc_dpcd); +if (max_slice_width <DP_DSC_MIN_SLICE_WIDTH_VALUE ) { +DRM_DEBUG_KMS ("Unsupported slice width %d by DP DSC Sink device\n" , + max_slice_width); +return 0 ; + } +/* Also take into account max slice width */ + min_slice_count =min_t (u8, min_slice_count, +DIV_ROUND_UP (mode_hdisplay, + max_slice_width)); + +/* Find the closest match to the valid slice count values */ +for (i =0 ; i <ARRAY_SIZE (valid_dsc_slicecount); i++) { +if (valid_dsc_slicecount[i] > +drm_dp_dsc_sink_max_slice_count (intel_dp->dsc_dpcd, + false)) +break ; +if (min_slice_count <= valid_dsc_slicecount[i]) +return valid_dsc_slicecount[i]; + } + +DRM_DEBUG_KMS ("Unsupported Slice Count %d\n" , min_slice_count); +return 0 ; +} +static enum drm_mode_status intel_dp_mode_valid (struct drm_connector *connector,struct drm_display_mode *mode)@@ -2259,7 +2357,7 @@ intel_dp_compute_config(struct intel_encoder *encoder, adjusted_mode->crtc_clock, pipe_config->port_clock, &pipe_config->dp_m_n, - constant_n); + constant_n, pipe_config->fec_enable);if (intel_connector->panel.downclock_mode !=NULL && dev_priv->drrs.type ==SEAMLESS_DRRS_SUPPORT ) {@@ -2269,7 +2367,7 @@ intel_dp_compute_config(struct intel_encoder *encoder, intel_connector->panel.downclock_mode->clock, pipe_config->port_clock, &pipe_config->dp_m2_n2, - constant_n); + constant_n, pipe_config->fec_enable); }if (!HAS_DDI (dev_priv))@@ -4373,91 +4471,6 @@ intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8 *sink_irq_vector)DP_DPRX_ESI_LEN ; } -u16 intel_dp_dsc_get_output_bpp (int link_clock,u8 lane_count, -int mode_clock,int mode_hdisplay) -{ -u16 bits_per_pixel, max_bpp_small_joiner_ram; -int i; - -/* -* Available Link Bandwidth(Kbits/sec) = (NumberOfLanes)* -* (LinkSymbolClock)* 8 * ((100-FECOverhead)/100)*(TimeSlotsPerMTP) -* FECOverhead = 2.4%, for SST -> TimeSlotsPerMTP is 1, -* for MST -> TimeSlotsPerMTP has to be calculated -*/ - bits_per_pixel = (link_clock * lane_count *8 * -DP_DSC_FEC_OVERHEAD_FACTOR ) / - mode_clock; - -/* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */ - max_bpp_small_joiner_ram =DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER / - mode_hdisplay; - -/* -* Greatest allowed DSC BPP = MIN (output BPP from avaialble Link BW -* check, output bpp from small joiner RAM check) -*/ - bits_per_pixel =min (bits_per_pixel, max_bpp_small_joiner_ram); - -/* Error out if the max bpp is less than smallest allowed valid bpp */ -if (bits_per_pixel < valid_dsc_bpp[0 ]) { -DRM_DEBUG_KMS ("Unsupported BPP %d\n" , bits_per_pixel); -return 0 ; - } - -/* Find the nearest match in the array of known BPPs from VESA */ -for (i =0 ; i <ARRAY_SIZE (valid_dsc_bpp) -1 ; i++) { -if (bits_per_pixel < valid_dsc_bpp[i +1 ]) -break ; - } - bits_per_pixel = valid_dsc_bpp[i]; - -/* -* Compressed BPP in U6.4 format so multiply by 16, for Gen 11, -* fractional part is 0 -*/ -return bits_per_pixel <<4 ; -} - -u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp, -int mode_clock, -int mode_hdisplay) -{ -u8 min_slice_count, i; -int max_slice_width; - -if (mode_clock <=DP_DSC_PEAK_PIXEL_RATE ) - min_slice_count =DIV_ROUND_UP (mode_clock, -DP_DSC_MAX_ENC_THROUGHPUT_0 ); -else - min_slice_count =DIV_ROUND_UP (mode_clock, -DP_DSC_MAX_ENC_THROUGHPUT_1 ); - - max_slice_width =drm_dp_dsc_sink_max_slice_width (intel_dp->dsc_dpcd); -if (max_slice_width <DP_DSC_MIN_SLICE_WIDTH_VALUE ) { -DRM_DEBUG_KMS ("Unsupported slice width %d by DP DSC Sink device\n" , - max_slice_width); -return 0 ; - } -/* Also take into account max slice width */ - min_slice_count =min_t (u8, min_slice_count, -DIV_ROUND_UP (mode_hdisplay, - max_slice_width)); - -/* Find the closest match to the valid slice count values */ -for (i =0 ; i <ARRAY_SIZE (valid_dsc_slicecount); i++) { -if (valid_dsc_slicecount[i] > -drm_dp_dsc_sink_max_slice_count (intel_dp->dsc_dpcd, - false)) -break ; -if (min_slice_count <= valid_dsc_slicecount[i]) -return valid_dsc_slicecount[i]; - } - -DRM_DEBUG_KMS ("Unsupported Slice Count %d\n" , min_slice_count); -return 0 ; -} -static void intel_pixel_encoding_setup_vsc (struct intel_dp *intel_dp,const struct intel_crtc_state *crtc_state)drivers/gpu/drm/i915/display/intel_dp.h +3
-4@@ -103,10 +103,6 @@ bool intel_dp_source_supports_hbr2(struct intel_dp *intel_dp);bool intel_dp_source_supports_hbr3 (struct intel_dp *intel_dp);bool intel_dp_get_link_status (struct intel_dp *intel_dp,u8 *link_status); -u16 intel_dp_dsc_get_output_bpp (int link_clock,u8 lane_count, -int mode_clock,int mode_hdisplay); -u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp,int mode_clock, -int mode_hdisplay);bool intel_dp_read_dpcd (struct intel_dp *intel_dp);bool intel_dp_get_colorimetry_status (struct intel_dp *intel_dp);@@ -119,4 +115,7 @@ static inline unsigned int intel_dp_unused_lane_mask(int lane_count) return ~((1 << lane_count) - 1) & 0xf; } +u32 intel_dp_fec_to_mode_clock (u32 fec_clock); +u32 intel_dp_mode_to_fec_clock (u32 mode_clock); +#endif /* __INTEL_DP_H__ */ drivers/gpu/drm/i915/display/intel_dp_mst.c +1
-1@@ -81,7 +81,7 @@ static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder, adjusted_mode->crtc_clock, crtc_state->port_clock, &crtc_state->dp_m_n, - constant_n); + constant_n, crtc_state->fec_enable); crtc_state->dp_m_n.tu = slots;return 0 ;Signature · 1 line
2.20.1
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerPATCH 1/1 drm/i915/dp: Fix dsc bpp calculations, v4.
There was a integer wraparound when mode_clock became too high, and we didn't correct for the FEC overhead factor when dividing, with the calculations breaking at HBR3.
As a result our calculated bpp was way too high, and the link width limitation never came into effect.
Print out the resulting bpp calcululations as a sanity check, just in case we ever have to debug it later on again.
We also used the wrong factor for FEC. While bspec mentions 2.4%, all the calculations use 1/0.972261, and the same ratio should be applied to data M/N as well, so use it there when FEC is enabled.
Make sure we don't break hw readout, and read out FEC enable state and correct the DDI clock readout for the new values.
This fixes the FIFO underrun we are seeing with FEC enabled.
Changes since v2:
- Handle fec_enable in intel_link_compute_m_n, so only data M/N is adjusted. (Ville)
- Fix initial hardware readout for FEC. (Ville)
Changes since v3:
- Remove bogus fec_to_mode_clock. (Ville)
--- drivers/gpu/drm/i915/display/intel_ddi.c | 17 ++ drivers/gpu/drm/i915/display/intel_display.c | 13 +- drivers/gpu/drm/i915/display/intel_display.h | 2 +- drivers/gpu/drm/i915/display/intel_dp.c | 184 ++++++++++--------- drivers/gpu/drm/i915/display/intel_dp.h | 6 +- drivers/gpu/drm/i915/display/intel_dp_mst.c | 2 +- 6 files changed, 125 insertions(+), 99 deletions(-)
drivers/gpu/drm/i915/display/intel_ddi.c +17 -0
@@ -4045,6 +4045,23 @@ void intel_ddi_get_config(struct intel_encoder *encoder, pipe_config->lane_count = ((temp &DDI_PORT_WIDTH_MASK ) >>DDI_PORT_WIDTH_SHIFT ) +1 ;intel_dp_get_m_n (intel_crtc, pipe_config); + +if (INTEL_GEN (dev_priv) >=11 ) { +i915_reg_t dp_tp_ctl; + +if (IS_GEN (dev_priv,11 )) + dp_tp_ctl =DP_TP_CTL (pipe_config->cpu_transcoder); +else + dp_tp_ctl =TGL_DP_TP_CTL (pipe_config->cpu_transcoder); + + pipe_config->fec_enable = +I915_READ (dp_tp_ctl) &DP_TP_CTL_FEC_ENABLE ; + +DRM_DEBUG_KMS ("[ENCODER:%d:%s] Fec status: %u\n" , + encoder->base.base.id, encoder->base.name, + pipe_config->fec_enable); + } +break ;case TRANS_DDI_MODE_SELECT_DP_MST : pipe_config->output_types |=BIT (INTEL_OUTPUT_DP_MST );
drivers/gpu/drm/i915/display/intel_display.c +9 -4
@@ -7291,7 +7291,7 @@ static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc, pipe_config->fdi_lanes = lane;intel_link_compute_m_n (pipe_config->pipe_bpp, lane, fdi_dotclock, - link_bw, &pipe_config->fdi_m_n, false); + link_bw, &pipe_config->fdi_m_n, false, false); ret =ironlake_check_fdi_lanes (dev, intel_crtc->pipe, pipe_config);if (ret == -EDEADLK )
@@ -7538,11 +7538,15 @@ void intel_link_compute_m_n(u16 bits_per_pixel, int nlanes, int pixel_clock, int link_clock, struct intel_link_m_n *m_n, - bool constant_n) + bool constant_n, bool fec_enable) { - m_n->tu = 64; + u32 data_clock = bits_per_pixel * pixel_clock; + +if (fec_enable) + data_clock =intel_dp_mode_to_fec_clock (data_clock); -compute_m_n (bits_per_pixel * pixel_clock, + m_n->tu =64 ; +compute_m_n (data_clock, link_clock * nlanes *8 , &m_n->gmch_m, &m_n->gmch_n, constant_n);
@@ -12832,6 +12836,7 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,PIPE_CONF_CHECK_BOOL (hdmi_scrambling);PIPE_CONF_CHECK_BOOL (hdmi_high_tmds_clock_ratio);PIPE_CONF_CHECK_BOOL (has_infoframe); +PIPE_CONF_CHECK_BOOL (fec_enable);PIPE_CONF_CHECK_BOOL_INCOMPLETE (has_audio);
drivers/gpu/drm/i915/display/intel_display.h +1 -1
@@ -443,7 +443,7 @@ enum phy_fia {void intel_link_compute_m_n (u16 bpp,int nlanes,int pixel_clock,int link_clock,struct intel_link_m_n *m_n, -bool constant_n); +bool constant_n,bool fec_enable);bool is_ccs_modifier (u64 modifier);void lpt_disable_clkout_dp (struct drm_i915_private *dev_priv); u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,
drivers/gpu/drm/i915/display/intel_dp.c +95 -89
214 lines not on this page · raw message
drivers/gpu/drm/i915/display/intel_dp.h +2 -4
@@ -103,10 +103,6 @@ bool intel_dp_source_supports_hbr2(struct intel_dp *intel_dp);bool intel_dp_source_supports_hbr3 (struct intel_dp *intel_dp);bool intel_dp_get_link_status (struct intel_dp *intel_dp,u8 *link_status); -u16 intel_dp_dsc_get_output_bpp (int link_clock,u8 lane_count, -int mode_clock,int mode_hdisplay); -u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp,int mode_clock, -int mode_hdisplay);bool intel_dp_read_dpcd (struct intel_dp *intel_dp);bool intel_dp_get_colorimetry_status (struct intel_dp *intel_dp);
@@ -119,4 +115,6 @@ static inline unsigned int intel_dp_unused_lane_mask(int lane_count) return ~((1 << lane_count) - 1) & 0xf; } +u32 intel_dp_mode_to_fec_clock (u32 mode_clock); +#endif /* __INTEL_DP_H__ */
drivers/gpu/drm/i915/display/intel_dp_mst.c +1 -1
@@ -81,7 +81,7 @@ static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder, adjusted_mode->crtc_clock, crtc_state->port_clock, &crtc_state->dp_m_n, - constant_n); + constant_n, crtc_state->fec_enable); crtc_state->dp_m_n.tu = slots;return 0 ;
Signature · 1 line
2.20.1
Maarten Lankhorst
maintainerRe: [PATCH] drm/i915/dp: Fix dsc bpp calculations, v4.
Op 23-09-2019 om 16:49 schreef Maarten Lankhorst:
Quoted 10 lines
There was a integer wraparound when
mode_clockbecame too high, and we didn't correct for the FEC overhead factor when dividing, with the calculations breaking at HBR3.As a result our calculated bpp was way too high, and the link width limitation never came into effect.
Print out the resulting bpp calcululations as a sanity check, just in case we ever have to debug it later on again.
Quoted 6 lines
We also used the wrong factor for FEC. While bspec mentions 2.4%, all the calculations use 1/0.972261, and the same ratio should be applied to data M/N as well, so use it there when FEC is enabled.
Make sure we don't break hw readout, and read out FEC enable state and correct the DDI clock readout for the new values.
Note to self, needs this removed from commit msg.
Quoted 360 lines
This fixes the FIFO underrun we are seeing with FEC enabled.
Changes since v2:
- Handlefec_enableinintel_link_compute_m_n, so only data M/N is adjusted. (Ville)
- Fix initial hardware readout for FEC. (Ville)
Changes since v3:
- Remove bogusfec_to_mode_clock. (Ville)Signed-off-by Maarten Lankhorst <[email protected]>Fixes d9218c8f6cf4 ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC")Cc <[email protected]> # v5.0+Cc Manasi Navare <[email protected]>--- drivers/gpu/drm/i915/display/intel_ddi.c | 17 ++ drivers/gpu/drm/i915/display/intel_display.c | 13 +- drivers/gpu/drm/i915/display/intel_display.h | 2 +- drivers/gpu/drm/i915/display/intel_dp.c | 184 ++++++++++--------- drivers/gpu/drm/i915/display/intel_dp.h | 6 +- drivers/gpu/drm/i915/display/intel_dp_mst.c | 2 +- 6 files changed, 125 insertions(+), 99 deletions(-)drivers/gpu/drm/i915/display/intel_ddi.c +17
-0@@ -4045,6 +4045,23 @@ void intel_ddi_get_config(struct intel_encoder *encoder, pipe_config->lane_count = ((temp &DDI_PORT_WIDTH_MASK ) >>DDI_PORT_WIDTH_SHIFT ) +1 ;intel_dp_get_m_n (intel_crtc, pipe_config); + +if (INTEL_GEN (dev_priv) >=11 ) { +i915_reg_t dp_tp_ctl; + +if (IS_GEN (dev_priv,11 )) + dp_tp_ctl =DP_TP_CTL (pipe_config->cpu_transcoder); +else + dp_tp_ctl =TGL_DP_TP_CTL (pipe_config->cpu_transcoder); + + pipe_config->fec_enable = +I915_READ (dp_tp_ctl) &DP_TP_CTL_FEC_ENABLE ; + +DRM_DEBUG_KMS ("[ENCODER:%d:%s] Fec status: %u\n" , + encoder->base.base.id, encoder->base.name, + pipe_config->fec_enable); + } +break ;case TRANS_DDI_MODE_SELECT_DP_MST : pipe_config->output_types |=BIT (INTEL_OUTPUT_DP_MST );drivers/gpu/drm/i915/display/intel_display.c +9
-4@@ -7291,7 +7291,7 @@ static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc, pipe_config->fdi_lanes = lane;intel_link_compute_m_n (pipe_config->pipe_bpp, lane, fdi_dotclock, - link_bw, &pipe_config->fdi_m_n, false); + link_bw, &pipe_config->fdi_m_n, false, false); ret =ironlake_check_fdi_lanes (dev, intel_crtc->pipe, pipe_config);if (ret == -EDEADLK )@@ -7538,11 +7538,15 @@ void intel_link_compute_m_n(u16 bits_per_pixel, int nlanes, int pixel_clock, int link_clock, struct intel_link_m_n *m_n, - bool constant_n) + bool constant_n, bool fec_enable) { - m_n->tu = 64; + u32 data_clock = bits_per_pixel * pixel_clock; + +if (fec_enable) + data_clock =intel_dp_mode_to_fec_clock (data_clock); -compute_m_n (bits_per_pixel * pixel_clock, + m_n->tu =64 ; +compute_m_n (data_clock, link_clock * nlanes *8 , &m_n->gmch_m, &m_n->gmch_n, constant_n);@@ -12832,6 +12836,7 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,PIPE_CONF_CHECK_BOOL (hdmi_scrambling);PIPE_CONF_CHECK_BOOL (hdmi_high_tmds_clock_ratio);PIPE_CONF_CHECK_BOOL (has_infoframe); +PIPE_CONF_CHECK_BOOL (fec_enable);PIPE_CONF_CHECK_BOOL_INCOMPLETE (has_audio);drivers/gpu/drm/i915/display/intel_display.h +1
-1@@ -443,7 +443,7 @@ enum phy_fia {void intel_link_compute_m_n (u16 bpp,int nlanes,int pixel_clock,int link_clock,struct intel_link_m_n *m_n, -bool constant_n); +bool constant_n,bool fec_enable);bool is_ccs_modifier (u64 modifier);void lpt_disable_clkout_dp (struct drm_i915_private *dev_priv); u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,drivers/gpu/drm/i915/display/intel_dp.c +95
-89@@ -76,8 +76,8 @@#define DP_DSC_MAX_ENC_THROUGHPUT_0 340000#define DP_DSC_MAX_ENC_THROUGHPUT_1 400000 -/* DP DSC FEC Overhead factor = (100 - 2.4)/100 */ -#define DP_DSC_FEC_OVERHEAD_FACTOR 976 +/* DP DSC FEC Overhead factor = 1/(0.972261) */ +#define DP_DSC_FEC_OVERHEAD_FACTOR 972261/* Compliance test status bits */ #define INTEL_DP_RESOLUTION_SHIFT_MASK 0@@ -492,6 +492,97 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,return 0 ; } +u32 intel_dp_mode_to_fec_clock (u32 mode_clock) +{ +return div_u64 (mul_u32_u32 (mode_clock,1000000U ), +DP_DSC_FEC_OVERHEAD_FACTOR ); +} + +static u16 intel_dp_dsc_get_output_bpp (u32 link_clock,u32 lane_count, +u32 mode_clock,u32 mode_hdisplay) +{ +u32 bits_per_pixel, max_bpp_small_joiner_ram; +int i; + +/* +* Available Link Bandwidth(Kbits/sec) = (NumberOfLanes)* +* (LinkSymbolClock)* 8 * (TimeSlotsPerMTP) +* for SST -> TimeSlotsPerMTP is 1, +* for MST -> TimeSlotsPerMTP has to be calculated +*/ + bits_per_pixel = (link_clock * lane_count *8 ) / +intel_dp_mode_to_fec_clock (mode_clock); +DRM_DEBUG_KMS ("Max link bpp: %u\n" , bits_per_pixel); + +/* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */ + max_bpp_small_joiner_ram =DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER / mode_hdisplay; +DRM_DEBUG_KMS ("Max small joiner bpp: %u\n" , max_bpp_small_joiner_ram); + +/* +* Greatest allowed DSC BPP = MIN (output BPP from available Link BW +* check, output bpp from small joiner RAM check) +*/ + bits_per_pixel =min (bits_per_pixel, max_bpp_small_joiner_ram); + +/* Error out if the max bpp is less than smallest allowed valid bpp */ +if (bits_per_pixel < valid_dsc_bpp[0 ]) { +DRM_DEBUG_KMS ("Unsupported BPP %u, min %u\n" , + bits_per_pixel, valid_dsc_bpp[0 ]); +return 0 ; + } + +/* Find the nearest match in the array of known BPPs from VESA */ +for (i =0 ; i <ARRAY_SIZE (valid_dsc_bpp) -1 ; i++) { +if (bits_per_pixel < valid_dsc_bpp[i +1 ]) +break ; + } + bits_per_pixel = valid_dsc_bpp[i]; + +/* +* Compressed BPP in U6.4 format so multiply by 16, for Gen 11, +* fractional part is 0 +*/ +return bits_per_pixel <<4 ; +} + +static u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp, +int mode_clock,int mode_hdisplay) +{ +u8 min_slice_count, i; +int max_slice_width; + +if (mode_clock <=DP_DSC_PEAK_PIXEL_RATE ) + min_slice_count =DIV_ROUND_UP (mode_clock, +DP_DSC_MAX_ENC_THROUGHPUT_0 ); +else + min_slice_count =DIV_ROUND_UP (mode_clock, +DP_DSC_MAX_ENC_THROUGHPUT_1 ); + + max_slice_width =drm_dp_dsc_sink_max_slice_width (intel_dp->dsc_dpcd); +if (max_slice_width <DP_DSC_MIN_SLICE_WIDTH_VALUE ) { +DRM_DEBUG_KMS ("Unsupported slice width %d by DP DSC Sink device\n" , + max_slice_width); +return 0 ; + } +/* Also take into account max slice width */ + min_slice_count =min_t (u8, min_slice_count, +DIV_ROUND_UP (mode_hdisplay, + max_slice_width)); + +/* Find the closest match to the valid slice count values */ +for (i =0 ; i <ARRAY_SIZE (valid_dsc_slicecount); i++) { +if (valid_dsc_slicecount[i] > +drm_dp_dsc_sink_max_slice_count (intel_dp->dsc_dpcd, + false)) +break ; +if (min_slice_count <= valid_dsc_slicecount[i]) +return valid_dsc_slicecount[i]; + } + +DRM_DEBUG_KMS ("Unsupported Slice Count %d\n" , min_slice_count); +return 0 ; +} +static enum drm_mode_status intel_dp_mode_valid (struct drm_connector *connector,struct drm_display_mode *mode)@@ -2259,7 +2350,7 @@ intel_dp_compute_config(struct intel_encoder *encoder, adjusted_mode->crtc_clock, pipe_config->port_clock, &pipe_config->dp_m_n, - constant_n); + constant_n, pipe_config->fec_enable);if (intel_connector->panel.downclock_mode !=NULL && dev_priv->drrs.type ==SEAMLESS_DRRS_SUPPORT ) {@@ -2269,7 +2360,7 @@ intel_dp_compute_config(struct intel_encoder *encoder, intel_connector->panel.downclock_mode->clock, pipe_config->port_clock, &pipe_config->dp_m2_n2, - constant_n); + constant_n, pipe_config->fec_enable); }if (!HAS_DDI (dev_priv))@@ -4373,91 +4464,6 @@ intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8 *sink_irq_vector)DP_DPRX_ESI_LEN ; } -u16 intel_dp_dsc_get_output_bpp (int link_clock,u8 lane_count, -int mode_clock,int mode_hdisplay) -{ -u16 bits_per_pixel, max_bpp_small_joiner_ram; -int i; - -/* -* Available Link Bandwidth(Kbits/sec) = (NumberOfLanes)* -* (LinkSymbolClock)* 8 * ((100-FECOverhead)/100)*(TimeSlotsPerMTP) -* FECOverhead = 2.4%, for SST -> TimeSlotsPerMTP is 1, -* for MST -> TimeSlotsPerMTP has to be calculated -*/ - bits_per_pixel = (link_clock * lane_count *8 * -DP_DSC_FEC_OVERHEAD_FACTOR ) / - mode_clock; - -/* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */ - max_bpp_small_joiner_ram =DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER / - mode_hdisplay; - -/* -* Greatest allowed DSC BPP = MIN (output BPP from avaialble Link BW -* check, output bpp from small joiner RAM check) -*/ - bits_per_pixel =min (bits_per_pixel, max_bpp_small_joiner_ram); - -/* Error out if the max bpp is less than smallest allowed valid bpp */ -if (bits_per_pixel < valid_dsc_bpp[0 ]) { -DRM_DEBUG_KMS ("Unsupported BPP %d\n" , bits_per_pixel); -return 0 ; - } - -/* Find the nearest match in the array of known BPPs from VESA */ -for (i =0 ; i <ARRAY_SIZE (valid_dsc_bpp) -1 ; i++) { -if (bits_per_pixel < valid_dsc_bpp[i +1 ]) -break ; - } - bits_per_pixel = valid_dsc_bpp[i]; - -/* -* Compressed BPP in U6.4 format so multiply by 16, for Gen 11, -* fractional part is 0 -*/ -return bits_per_pixel <<4 ; -} - -u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp, -int mode_clock, -int mode_hdisplay) -{ -u8 min_slice_count, i; -int max_slice_width; - -if (mode_clock <=DP_DSC_PEAK_PIXEL_RATE ) - min_slice_count =DIV_ROUND_UP (mode_clock, -DP_DSC_MAX_ENC_THROUGHPUT_0 ); -else - min_slice_count =DIV_ROUND_UP (mode_clock, -DP_DSC_MAX_ENC_THROUGHPUT_1 ); - - max_slice_width =drm_dp_dsc_sink_max_slice_width (intel_dp->dsc_dpcd); -if (max_slice_width <DP_DSC_MIN_SLICE_WIDTH_VALUE ) { -DRM_DEBUG_KMS ("Unsupported slice width %d by DP DSC Sink device\n" , - max_slice_width); -return 0 ; - } -/* Also take into account max slice width */ - min_slice_count =min_t (u8, min_slice_count, -DIV_ROUND_UP (mode_hdisplay, - max_slice_width)); - -/* Find the closest match to the valid slice count values */ -for (i =0 ; i <ARRAY_SIZE (valid_dsc_slicecount); i++) { -if (valid_dsc_slicecount[i] > -drm_dp_dsc_sink_max_slice_count (intel_dp->dsc_dpcd, - false)) -break ; -if (min_slice_count <= valid_dsc_slicecount[i]) -return valid_dsc_slicecount[i]; - } - -DRM_DEBUG_KMS ("Unsupported Slice Count %d\n" , min_slice_count); -return 0 ; -} -static void intel_pixel_encoding_setup_vsc (struct intel_dp *intel_dp,const struct intel_crtc_state *crtc_state)drivers/gpu/drm/i915/display/intel_dp.h +2
-4@@ -103,10 +103,6 @@ bool intel_dp_source_supports_hbr2(struct intel_dp *intel_dp);bool intel_dp_source_supports_hbr3 (struct intel_dp *intel_dp);bool intel_dp_get_link_status (struct intel_dp *intel_dp,u8 *link_status); -u16 intel_dp_dsc_get_output_bpp (int link_clock,u8 lane_count, -int mode_clock,int mode_hdisplay); -u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp,int mode_clock, -int mode_hdisplay);bool intel_dp_read_dpcd (struct intel_dp *intel_dp);bool intel_dp_get_colorimetry_status (struct intel_dp *intel_dp);@@ -119,4 +115,6 @@ static inline unsigned int intel_dp_unused_lane_mask(int lane_count) return ~((1 << lane_count) - 1) & 0xf; } +u32 intel_dp_mode_to_fec_clock (u32 mode_clock); +#endif /* __INTEL_DP_H__ */ drivers/gpu/drm/i915/display/intel_dp_mst.c +1
-1@@ -81,7 +81,7 @@ static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder, adjusted_mode->crtc_clock, crtc_state->port_clock, &crtc_state->dp_m_n, - constant_n); + constant_n, crtc_state->fec_enable); crtc_state->dp_m_n.tu = slots;return 0 ;
Re: [PATCH] drm/i915/dp: Fix dsc bpp calculations, v4.
In reply to Maarten LankhorstQuoted 47 lines · Maarten Lankhorst
There was a integer wraparound when
mode_clockbecame too high, and we didn't correct for the FEC overhead factor when dividing, with the calculations breaking at HBR3.As a result our calculated bpp was way too high, and the link width limitation never came into effect.
Print out the resulting bpp calcululations as a sanity check, just in case we ever have to debug it later on again.
We also used the wrong factor for FEC. While bspec mentions 2.4%, all the calculations use 1/0.972261, and the same ratio should be applied to data M/N as well, so use it there when FEC is enabled.
Make sure we don't break hw readout, and read out FEC enable state and correct the DDI clock readout for the new values.
This fixes the FIFO underrun we are seeing with FEC enabled.
Changes since v2:
- Handlefec_enableinintel_link_compute_m_n, so only data M/N is adjusted. (Ville)
- Fix initial hardware readout for FEC. (Ville)
Changes since v3:
- Remove bogusfec_to_mode_clock. (Ville)Signed-off-by Maarten Lankhorst <[email protected]>Fixes d9218c8f6cf4 ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC")Cc <[email protected]> # v5.0+Cc Manasi Navare <[email protected]>--- drivers/gpu/drm/i915/display/intel_ddi.c | 17 ++ drivers/gpu/drm/i915/display/intel_display.c | 13 +- drivers/gpu/drm/i915/display/intel_display.h | 2 +- drivers/gpu/drm/i915/display/intel_dp.c | 184 ++++++++++--------- drivers/gpu/drm/i915/display/intel_dp.h | 6 +- drivers/gpu/drm/i915/display/intel_dp_mst.c | 2 +- 6 files changed, 125 insertions(+), 99 deletions(-)drivers/gpu/drm/i915/display/intel_ddi.c +1
-0@@ -4045,6 +4045,23 @@ void intel_ddi_get_config(struct intel_encoder *encoder, pipe_config->lane_count = ((temp &DDI_PORT_WIDTH_MASK ) >>DDI_PORT_WIDTH_SHIFT ) +1 ;intel_dp_get_m_n (intel_crtc, pipe_config); +
drivers/gpu/drm/i915/display/intel_ddi.c void intel_ddi_get_config(struct intel_encoder *encoder, · line 4058
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_ddi.c +10
-0+if (INTEL_GEN (dev_priv) >=11 ) { +i915_reg_t dp_tp_ctl; + +if (IS_GEN (dev_priv,11 )) + dp_tp_ctl =DP_TP_CTL (pipe_config->cpu_transcoder); +else + dp_tp_ctl =TGL_DP_TP_CTL (pipe_config->cpu_transcoder); + + pipe_config->fec_enable = +I915_READ (dp_tp_ctl) &DP_TP_CTL_FEC_ENABLE ;
Can you split the fec_enable readout/state check into a separate patch?
I wonder how the lack of this stuff was missed when FEC was adeed...
drivers/gpu/drm/i915/display/intel_ddi.c void intel_ddi_get_config(struct intel_encoder *encoder, · line 4062
Quoted 4 lines
drivers/gpu/drm/i915/display/intel_ddi.c +4
-0+ +DRM_DEBUG_KMS ("[ENCODER:%d:%s] Fec status: %u\n" , + encoder->base.base.id, encoder->base.name, + pipe_config->fec_enable);
I'd just include it as part of the normal state dump.
Quoted 318 lines
drivers/gpu/drm/i915/display/intel_ddi.c +2
-0+ } +break ;case TRANS_DDI_MODE_SELECT_DP_MST : pipe_config->output_types |=BIT (INTEL_OUTPUT_DP_MST );drivers/gpu/drm/i915/display/intel_display.c +9
-4@@ -7291,7 +7291,7 @@ static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc, pipe_config->fdi_lanes = lane;intel_link_compute_m_n (pipe_config->pipe_bpp, lane, fdi_dotclock, - link_bw, &pipe_config->fdi_m_n, false); + link_bw, &pipe_config->fdi_m_n, false, false); ret =ironlake_check_fdi_lanes (dev, intel_crtc->pipe, pipe_config);if (ret == -EDEADLK )@@ -7538,11 +7538,15 @@ void intel_link_compute_m_n(u16 bits_per_pixel, int nlanes, int pixel_clock, int link_clock, struct intel_link_m_n *m_n, - bool constant_n) + bool constant_n, bool fec_enable) { - m_n->tu = 64; + u32 data_clock = bits_per_pixel * pixel_clock; + +if (fec_enable) + data_clock =intel_dp_mode_to_fec_clock (data_clock); -compute_m_n (bits_per_pixel * pixel_clock, + m_n->tu =64 ; +compute_m_n (data_clock, link_clock * nlanes *8 , &m_n->gmch_m, &m_n->gmch_n, constant_n);@@ -12832,6 +12836,7 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,PIPE_CONF_CHECK_BOOL (hdmi_scrambling);PIPE_CONF_CHECK_BOOL (hdmi_high_tmds_clock_ratio);PIPE_CONF_CHECK_BOOL (has_infoframe); +PIPE_CONF_CHECK_BOOL (fec_enable);PIPE_CONF_CHECK_BOOL_INCOMPLETE (has_audio);drivers/gpu/drm/i915/display/intel_display.h +1
-1@@ -443,7 +443,7 @@ enum phy_fia {void intel_link_compute_m_n (u16 bpp,int nlanes,int pixel_clock,int link_clock,struct intel_link_m_n *m_n, -bool constant_n); +bool constant_n,bool fec_enable);bool is_ccs_modifier (u64 modifier);void lpt_disable_clkout_dp (struct drm_i915_private *dev_priv); u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,drivers/gpu/drm/i915/display/intel_dp.c +95
-89@@ -76,8 +76,8 @@#define DP_DSC_MAX_ENC_THROUGHPUT_0 340000#define DP_DSC_MAX_ENC_THROUGHPUT_1 400000 -/* DP DSC FEC Overhead factor = (100 - 2.4)/100 */ -#define DP_DSC_FEC_OVERHEAD_FACTOR 976 +/* DP DSC FEC Overhead factor = 1/(0.972261) */ +#define DP_DSC_FEC_OVERHEAD_FACTOR 972261/* Compliance test status bits */ #define INTEL_DP_RESOLUTION_SHIFT_MASK 0@@ -492,6 +492,97 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,return 0 ; } +u32 intel_dp_mode_to_fec_clock (u32 mode_clock) +{ +return div_u64 (mul_u32_u32 (mode_clock,1000000U ), +DP_DSC_FEC_OVERHEAD_FACTOR ); +} + +static u16 intel_dp_dsc_get_output_bpp (u32 link_clock,u32 lane_count, +u32 mode_clock,u32 mode_hdisplay) +{ +u32 bits_per_pixel, max_bpp_small_joiner_ram; +int i; + +/* +* Available Link Bandwidth(Kbits/sec) = (NumberOfLanes)* +* (LinkSymbolClock)* 8 * (TimeSlotsPerMTP) +* for SST -> TimeSlotsPerMTP is 1, +* for MST -> TimeSlotsPerMTP has to be calculated +*/ + bits_per_pixel = (link_clock * lane_count *8 ) / +intel_dp_mode_to_fec_clock (mode_clock); +DRM_DEBUG_KMS ("Max link bpp: %u\n" , bits_per_pixel); + +/* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */ + max_bpp_small_joiner_ram =DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER / mode_hdisplay; +DRM_DEBUG_KMS ("Max small joiner bpp: %u\n" , max_bpp_small_joiner_ram); + +/* +* Greatest allowed DSC BPP = MIN (output BPP from available Link BW +* check, output bpp from small joiner RAM check) +*/ + bits_per_pixel =min (bits_per_pixel, max_bpp_small_joiner_ram); + +/* Error out if the max bpp is less than smallest allowed valid bpp */ +if (bits_per_pixel < valid_dsc_bpp[0 ]) { +DRM_DEBUG_KMS ("Unsupported BPP %u, min %u\n" , + bits_per_pixel, valid_dsc_bpp[0 ]); +return 0 ; + } + +/* Find the nearest match in the array of known BPPs from VESA */ +for (i =0 ; i <ARRAY_SIZE (valid_dsc_bpp) -1 ; i++) { +if (bits_per_pixel < valid_dsc_bpp[i +1 ]) +break ; + } + bits_per_pixel = valid_dsc_bpp[i]; + +/* +* Compressed BPP in U6.4 format so multiply by 16, for Gen 11, +* fractional part is 0 +*/ +return bits_per_pixel <<4 ; +} + +static u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp, +int mode_clock,int mode_hdisplay) +{ +u8 min_slice_count, i; +int max_slice_width; + +if (mode_clock <=DP_DSC_PEAK_PIXEL_RATE ) + min_slice_count =DIV_ROUND_UP (mode_clock, +DP_DSC_MAX_ENC_THROUGHPUT_0 ); +else + min_slice_count =DIV_ROUND_UP (mode_clock, +DP_DSC_MAX_ENC_THROUGHPUT_1 ); + + max_slice_width =drm_dp_dsc_sink_max_slice_width (intel_dp->dsc_dpcd); +if (max_slice_width <DP_DSC_MIN_SLICE_WIDTH_VALUE ) { +DRM_DEBUG_KMS ("Unsupported slice width %d by DP DSC Sink device\n" , + max_slice_width); +return 0 ; + } +/* Also take into account max slice width */ + min_slice_count =min_t (u8, min_slice_count, +DIV_ROUND_UP (mode_hdisplay, + max_slice_width)); + +/* Find the closest match to the valid slice count values */ +for (i =0 ; i <ARRAY_SIZE (valid_dsc_slicecount); i++) { +if (valid_dsc_slicecount[i] > +drm_dp_dsc_sink_max_slice_count (intel_dp->dsc_dpcd, + false)) +break ; +if (min_slice_count <= valid_dsc_slicecount[i]) +return valid_dsc_slicecount[i]; + } + +DRM_DEBUG_KMS ("Unsupported Slice Count %d\n" , min_slice_count); +return 0 ; +} +static enum drm_mode_status intel_dp_mode_valid (struct drm_connector *connector,struct drm_display_mode *mode)@@ -2259,7 +2350,7 @@ intel_dp_compute_config(struct intel_encoder *encoder, adjusted_mode->crtc_clock, pipe_config->port_clock, &pipe_config->dp_m_n, - constant_n); + constant_n, pipe_config->fec_enable);if (intel_connector->panel.downclock_mode !=NULL && dev_priv->drrs.type ==SEAMLESS_DRRS_SUPPORT ) {@@ -2269,7 +2360,7 @@ intel_dp_compute_config(struct intel_encoder *encoder, intel_connector->panel.downclock_mode->clock, pipe_config->port_clock, &pipe_config->dp_m2_n2, - constant_n); + constant_n, pipe_config->fec_enable); }if (!HAS_DDI (dev_priv))@@ -4373,91 +4464,6 @@ intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8 *sink_irq_vector)DP_DPRX_ESI_LEN ; } -u16 intel_dp_dsc_get_output_bpp (int link_clock,u8 lane_count, -int mode_clock,int mode_hdisplay) -{ -u16 bits_per_pixel, max_bpp_small_joiner_ram; -int i; - -/* -* Available Link Bandwidth(Kbits/sec) = (NumberOfLanes)* -* (LinkSymbolClock)* 8 * ((100-FECOverhead)/100)*(TimeSlotsPerMTP) -* FECOverhead = 2.4%, for SST -> TimeSlotsPerMTP is 1, -* for MST -> TimeSlotsPerMTP has to be calculated -*/ - bits_per_pixel = (link_clock * lane_count *8 * -DP_DSC_FEC_OVERHEAD_FACTOR ) / - mode_clock; - -/* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */ - max_bpp_small_joiner_ram =DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER / - mode_hdisplay; - -/* -* Greatest allowed DSC BPP = MIN (output BPP from avaialble Link BW -* check, output bpp from small joiner RAM check) -*/ - bits_per_pixel =min (bits_per_pixel, max_bpp_small_joiner_ram); - -/* Error out if the max bpp is less than smallest allowed valid bpp */ -if (bits_per_pixel < valid_dsc_bpp[0 ]) { -DRM_DEBUG_KMS ("Unsupported BPP %d\n" , bits_per_pixel); -return 0 ; - } - -/* Find the nearest match in the array of known BPPs from VESA */ -for (i =0 ; i <ARRAY_SIZE (valid_dsc_bpp) -1 ; i++) { -if (bits_per_pixel < valid_dsc_bpp[i +1 ]) -break ; - } - bits_per_pixel = valid_dsc_bpp[i]; - -/* -* Compressed BPP in U6.4 format so multiply by 16, for Gen 11, -* fractional part is 0 -*/ -return bits_per_pixel <<4 ; -} - -u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp, -int mode_clock, -int mode_hdisplay) -{ -u8 min_slice_count, i; -int max_slice_width; - -if (mode_clock <=DP_DSC_PEAK_PIXEL_RATE ) - min_slice_count =DIV_ROUND_UP (mode_clock, -DP_DSC_MAX_ENC_THROUGHPUT_0 ); -else - min_slice_count =DIV_ROUND_UP (mode_clock, -DP_DSC_MAX_ENC_THROUGHPUT_1 ); - - max_slice_width =drm_dp_dsc_sink_max_slice_width (intel_dp->dsc_dpcd); -if (max_slice_width <DP_DSC_MIN_SLICE_WIDTH_VALUE ) { -DRM_DEBUG_KMS ("Unsupported slice width %d by DP DSC Sink device\n" , - max_slice_width); -return 0 ; - } -/* Also take into account max slice width */ - min_slice_count =min_t (u8, min_slice_count, -DIV_ROUND_UP (mode_hdisplay, - max_slice_width)); - -/* Find the closest match to the valid slice count values */ -for (i =0 ; i <ARRAY_SIZE (valid_dsc_slicecount); i++) { -if (valid_dsc_slicecount[i] > -drm_dp_dsc_sink_max_slice_count (intel_dp->dsc_dpcd, - false)) -break ; -if (min_slice_count <= valid_dsc_slicecount[i]) -return valid_dsc_slicecount[i]; - } - -DRM_DEBUG_KMS ("Unsupported Slice Count %d\n" , min_slice_count); -return 0 ; -} -static void intel_pixel_encoding_setup_vsc (struct intel_dp *intel_dp,const struct intel_crtc_state *crtc_state)drivers/gpu/drm/i915/display/intel_dp.h +2
-4@@ -103,10 +103,6 @@ bool intel_dp_source_supports_hbr2(struct intel_dp *intel_dp);bool intel_dp_source_supports_hbr3 (struct intel_dp *intel_dp);bool intel_dp_get_link_status (struct intel_dp *intel_dp,u8 *link_status); -u16 intel_dp_dsc_get_output_bpp (int link_clock,u8 lane_count, -int mode_clock,int mode_hdisplay); -u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp,int mode_clock, -int mode_hdisplay);bool intel_dp_read_dpcd (struct intel_dp *intel_dp);bool intel_dp_get_colorimetry_status (struct intel_dp *intel_dp);@@ -119,4 +115,6 @@ static inline unsigned int intel_dp_unused_lane_mask(int lane_count) return ~((1 << lane_count) - 1) & 0xf; } +u32 intel_dp_mode_to_fec_clock (u32 mode_clock); +#endif /* __INTEL_DP_H__ */ drivers/gpu/drm/i915/display/intel_dp_mst.c +1
-1@@ -81,7 +81,7 @@ static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder, adjusted_mode->crtc_clock, crtc_state->port_clock, &crtc_state->dp_m_n, - constant_n); + constant_n, crtc_state->fec_enable); crtc_state->dp_m_n.tu = slots;return 0 ;Signature · 1 line
2.20.1
Signature · 2 lines
Ville Syrjälä Intel
Re: [PATCH] drm/i915/dp: Fix dsc bpp calculations, v4.
Quoted 62 lines · Ville Syrjälä
Quoted 47 lines · Maarten Lankhorst
There was a integer wraparound when
mode_clockbecame too high, and we didn't correct for the FEC overhead factor when dividing, with the calculations breaking at HBR3.As a result our calculated bpp was way too high, and the link width limitation never came into effect.
Print out the resulting bpp calcululations as a sanity check, just in case we ever have to debug it later on again.
We also used the wrong factor for FEC. While bspec mentions 2.4%, all the calculations use 1/0.972261, and the same ratio should be applied to data M/N as well, so use it there when FEC is enabled.
Make sure we don't break hw readout, and read out FEC enable state and correct the DDI clock readout for the new values.
This fixes the FIFO underrun we are seeing with FEC enabled.
Changes since v2:
- Handlefec_enableinintel_link_compute_m_n, so only data M/N is adjusted. (Ville)
- Fix initial hardware readout for FEC. (Ville)
Changes since v3:
- Remove bogusfec_to_mode_clock. (Ville)Signed-off-by Maarten Lankhorst <[email protected]>Fixes d9218c8f6cf4 ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC")Cc <[email protected]> # v5.0+Cc Manasi Navare <[email protected]>--- drivers/gpu/drm/i915/display/intel_ddi.c | 17 ++ drivers/gpu/drm/i915/display/intel_display.c | 13 +- drivers/gpu/drm/i915/display/intel_display.h | 2 +- drivers/gpu/drm/i915/display/intel_dp.c | 184 ++++++++++--------- drivers/gpu/drm/i915/display/intel_dp.h | 6 +- drivers/gpu/drm/i915/display/intel_dp_mst.c | 2 +- 6 files changed, 125 insertions(+), 99 deletions(-)drivers/gpu/drm/i915/display/intel_ddi.c +1
-0@@ -4045,6 +4045,23 @@ void intel_ddi_get_config(struct intel_encoder *encoder, pipe_config->lane_count = ((temp &DDI_PORT_WIDTH_MASK ) >>DDI_PORT_WIDTH_SHIFT ) +1 ;intel_dp_get_m_n (intel_crtc, pipe_config); +drivers/gpu/drm/i915/display/intel_ddi.c void intel_ddi_get_config(struct intel_encoder *encoder, · line 4058
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_ddi.c +10
-0+if (INTEL_GEN (dev_priv) >=11 ) { +i915_reg_t dp_tp_ctl; + +if (IS_GEN (dev_priv,11 )) + dp_tp_ctl =DP_TP_CTL (pipe_config->cpu_transcoder); +else + dp_tp_ctl =TGL_DP_TP_CTL (pipe_config->cpu_transcoder); + + pipe_config->fec_enable = +I915_READ (dp_tp_ctl) &DP_TP_CTL_FEC_ENABLE ;Can you split the
fec_enablereadout/state check into a separate patch?
Quoted 2 lines
I wonder how the lack of this stuff was missed when FEC was adeed...
We never had any FEC DP panel when this initial FEC enabling stuff was added, Anusha did test it with the FPGA based emulator that had FEC but we still missed the m_n correction as there were no underruns reported that time.
Thanks Ville and Maarten for catching this and fixing it.
Manasi
Quoted 329 lines
drivers/gpu/drm/i915/display/intel_ddi.c void intel_ddi_get_config(struct intel_encoder *encoder, · line 4062
Quoted 4 lines
drivers/gpu/drm/i915/display/intel_ddi.c +4
-0+ +DRM_DEBUG_KMS ("[ENCODER:%d:%s] Fec status: %u\n" , + encoder->base.base.id, encoder->base.name, + pipe_config->fec_enable);I'd just include it as part of the normal state dump.
Quoted 318 lines
drivers/gpu/drm/i915/display/intel_ddi.c +2
-0+ } +break ;case TRANS_DDI_MODE_SELECT_DP_MST : pipe_config->output_types |=BIT (INTEL_OUTPUT_DP_MST );drivers/gpu/drm/i915/display/intel_display.c +9
-4@@ -7291,7 +7291,7 @@ static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc, pipe_config->fdi_lanes = lane;intel_link_compute_m_n (pipe_config->pipe_bpp, lane, fdi_dotclock, - link_bw, &pipe_config->fdi_m_n, false); + link_bw, &pipe_config->fdi_m_n, false, false); ret =ironlake_check_fdi_lanes (dev, intel_crtc->pipe, pipe_config);if (ret == -EDEADLK )@@ -7538,11 +7538,15 @@ void intel_link_compute_m_n(u16 bits_per_pixel, int nlanes, int pixel_clock, int link_clock, struct intel_link_m_n *m_n, - bool constant_n) + bool constant_n, bool fec_enable) { - m_n->tu = 64; + u32 data_clock = bits_per_pixel * pixel_clock; + +if (fec_enable) + data_clock =intel_dp_mode_to_fec_clock (data_clock); -compute_m_n (bits_per_pixel * pixel_clock, + m_n->tu =64 ; +compute_m_n (data_clock, link_clock * nlanes *8 , &m_n->gmch_m, &m_n->gmch_n, constant_n);@@ -12832,6 +12836,7 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,PIPE_CONF_CHECK_BOOL (hdmi_scrambling);PIPE_CONF_CHECK_BOOL (hdmi_high_tmds_clock_ratio);PIPE_CONF_CHECK_BOOL (has_infoframe); +PIPE_CONF_CHECK_BOOL (fec_enable);PIPE_CONF_CHECK_BOOL_INCOMPLETE (has_audio);drivers/gpu/drm/i915/display/intel_display.h +1
-1@@ -443,7 +443,7 @@ enum phy_fia {void intel_link_compute_m_n (u16 bpp,int nlanes,int pixel_clock,int link_clock,struct intel_link_m_n *m_n, -bool constant_n); +bool constant_n,bool fec_enable);bool is_ccs_modifier (u64 modifier);void lpt_disable_clkout_dp (struct drm_i915_private *dev_priv); u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,drivers/gpu/drm/i915/display/intel_dp.c +95
-89@@ -76,8 +76,8 @@#define DP_DSC_MAX_ENC_THROUGHPUT_0 340000#define DP_DSC_MAX_ENC_THROUGHPUT_1 400000 -/* DP DSC FEC Overhead factor = (100 - 2.4)/100 */ -#define DP_DSC_FEC_OVERHEAD_FACTOR 976 +/* DP DSC FEC Overhead factor = 1/(0.972261) */ +#define DP_DSC_FEC_OVERHEAD_FACTOR 972261/* Compliance test status bits */ #define INTEL_DP_RESOLUTION_SHIFT_MASK 0@@ -492,6 +492,97 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,return 0 ; } +u32 intel_dp_mode_to_fec_clock (u32 mode_clock) +{ +return div_u64 (mul_u32_u32 (mode_clock,1000000U ), +DP_DSC_FEC_OVERHEAD_FACTOR ); +} + +static u16 intel_dp_dsc_get_output_bpp (u32 link_clock,u32 lane_count, +u32 mode_clock,u32 mode_hdisplay) +{ +u32 bits_per_pixel, max_bpp_small_joiner_ram; +int i; + +/* +* Available Link Bandwidth(Kbits/sec) = (NumberOfLanes)* +* (LinkSymbolClock)* 8 * (TimeSlotsPerMTP) +* for SST -> TimeSlotsPerMTP is 1, +* for MST -> TimeSlotsPerMTP has to be calculated +*/ + bits_per_pixel = (link_clock * lane_count *8 ) / +intel_dp_mode_to_fec_clock (mode_clock); +DRM_DEBUG_KMS ("Max link bpp: %u\n" , bits_per_pixel); + +/* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */ + max_bpp_small_joiner_ram =DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER / mode_hdisplay; +DRM_DEBUG_KMS ("Max small joiner bpp: %u\n" , max_bpp_small_joiner_ram); + +/* +* Greatest allowed DSC BPP = MIN (output BPP from available Link BW +* check, output bpp from small joiner RAM check) +*/ + bits_per_pixel =min (bits_per_pixel, max_bpp_small_joiner_ram); + +/* Error out if the max bpp is less than smallest allowed valid bpp */ +if (bits_per_pixel < valid_dsc_bpp[0 ]) { +DRM_DEBUG_KMS ("Unsupported BPP %u, min %u\n" , + bits_per_pixel, valid_dsc_bpp[0 ]); +return 0 ; + } + +/* Find the nearest match in the array of known BPPs from VESA */ +for (i =0 ; i <ARRAY_SIZE (valid_dsc_bpp) -1 ; i++) { +if (bits_per_pixel < valid_dsc_bpp[i +1 ]) +break ; + } + bits_per_pixel = valid_dsc_bpp[i]; + +/* +* Compressed BPP in U6.4 format so multiply by 16, for Gen 11, +* fractional part is 0 +*/ +return bits_per_pixel <<4 ; +} + +static u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp, +int mode_clock,int mode_hdisplay) +{ +u8 min_slice_count, i; +int max_slice_width; + +if (mode_clock <=DP_DSC_PEAK_PIXEL_RATE ) + min_slice_count =DIV_ROUND_UP (mode_clock, +DP_DSC_MAX_ENC_THROUGHPUT_0 ); +else + min_slice_count =DIV_ROUND_UP (mode_clock, +DP_DSC_MAX_ENC_THROUGHPUT_1 ); + + max_slice_width =drm_dp_dsc_sink_max_slice_width (intel_dp->dsc_dpcd); +if (max_slice_width <DP_DSC_MIN_SLICE_WIDTH_VALUE ) { +DRM_DEBUG_KMS ("Unsupported slice width %d by DP DSC Sink device\n" , + max_slice_width); +return 0 ; + } +/* Also take into account max slice width */ + min_slice_count =min_t (u8, min_slice_count, +DIV_ROUND_UP (mode_hdisplay, + max_slice_width)); + +/* Find the closest match to the valid slice count values */ +for (i =0 ; i <ARRAY_SIZE (valid_dsc_slicecount); i++) { +if (valid_dsc_slicecount[i] > +drm_dp_dsc_sink_max_slice_count (intel_dp->dsc_dpcd, + false)) +break ; +if (min_slice_count <= valid_dsc_slicecount[i]) +return valid_dsc_slicecount[i]; + } + +DRM_DEBUG_KMS ("Unsupported Slice Count %d\n" , min_slice_count); +return 0 ; +} +static enum drm_mode_status intel_dp_mode_valid (struct drm_connector *connector,struct drm_display_mode *mode)@@ -2259,7 +2350,7 @@ intel_dp_compute_config(struct intel_encoder *encoder, adjusted_mode->crtc_clock, pipe_config->port_clock, &pipe_config->dp_m_n, - constant_n); + constant_n, pipe_config->fec_enable);if (intel_connector->panel.downclock_mode !=NULL && dev_priv->drrs.type ==SEAMLESS_DRRS_SUPPORT ) {@@ -2269,7 +2360,7 @@ intel_dp_compute_config(struct intel_encoder *encoder, intel_connector->panel.downclock_mode->clock, pipe_config->port_clock, &pipe_config->dp_m2_n2, - constant_n); + constant_n, pipe_config->fec_enable); }if (!HAS_DDI (dev_priv))@@ -4373,91 +4464,6 @@ intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8 *sink_irq_vector)DP_DPRX_ESI_LEN ; } -u16 intel_dp_dsc_get_output_bpp (int link_clock,u8 lane_count, -int mode_clock,int mode_hdisplay) -{ -u16 bits_per_pixel, max_bpp_small_joiner_ram; -int i; - -/* -* Available Link Bandwidth(Kbits/sec) = (NumberOfLanes)* -* (LinkSymbolClock)* 8 * ((100-FECOverhead)/100)*(TimeSlotsPerMTP) -* FECOverhead = 2.4%, for SST -> TimeSlotsPerMTP is 1, -* for MST -> TimeSlotsPerMTP has to be calculated -*/ - bits_per_pixel = (link_clock * lane_count *8 * -DP_DSC_FEC_OVERHEAD_FACTOR ) / - mode_clock; - -/* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */ - max_bpp_small_joiner_ram =DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER / - mode_hdisplay; - -/* -* Greatest allowed DSC BPP = MIN (output BPP from avaialble Link BW -* check, output bpp from small joiner RAM check) -*/ - bits_per_pixel =min (bits_per_pixel, max_bpp_small_joiner_ram); - -/* Error out if the max bpp is less than smallest allowed valid bpp */ -if (bits_per_pixel < valid_dsc_bpp[0 ]) { -DRM_DEBUG_KMS ("Unsupported BPP %d\n" , bits_per_pixel); -return 0 ; - } - -/* Find the nearest match in the array of known BPPs from VESA */ -for (i =0 ; i <ARRAY_SIZE (valid_dsc_bpp) -1 ; i++) { -if (bits_per_pixel < valid_dsc_bpp[i +1 ]) -break ; - } - bits_per_pixel = valid_dsc_bpp[i]; - -/* -* Compressed BPP in U6.4 format so multiply by 16, for Gen 11, -* fractional part is 0 -*/ -return bits_per_pixel <<4 ; -} - -u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp, -int mode_clock, -int mode_hdisplay) -{ -u8 min_slice_count, i; -int max_slice_width; - -if (mode_clock <=DP_DSC_PEAK_PIXEL_RATE ) - min_slice_count =DIV_ROUND_UP (mode_clock, -DP_DSC_MAX_ENC_THROUGHPUT_0 ); -else - min_slice_count =DIV_ROUND_UP (mode_clock, -DP_DSC_MAX_ENC_THROUGHPUT_1 ); - - max_slice_width =drm_dp_dsc_sink_max_slice_width (intel_dp->dsc_dpcd); -if (max_slice_width <DP_DSC_MIN_SLICE_WIDTH_VALUE ) { -DRM_DEBUG_KMS ("Unsupported slice width %d by DP DSC Sink device\n" , - max_slice_width); -return 0 ; - } -/* Also take into account max slice width */ - min_slice_count =min_t (u8, min_slice_count, -DIV_ROUND_UP (mode_hdisplay, - max_slice_width)); - -/* Find the closest match to the valid slice count values */ -for (i =0 ; i <ARRAY_SIZE (valid_dsc_slicecount); i++) { -if (valid_dsc_slicecount[i] > -drm_dp_dsc_sink_max_slice_count (intel_dp->dsc_dpcd, - false)) -break ; -if (min_slice_count <= valid_dsc_slicecount[i]) -return valid_dsc_slicecount[i]; - } - -DRM_DEBUG_KMS ("Unsupported Slice Count %d\n" , min_slice_count); -return 0 ; -} -static void intel_pixel_encoding_setup_vsc (struct intel_dp *intel_dp,const struct intel_crtc_state *crtc_state)drivers/gpu/drm/i915/display/intel_dp.h +2
-4@@ -103,10 +103,6 @@ bool intel_dp_source_supports_hbr2(struct intel_dp *intel_dp);bool intel_dp_source_supports_hbr3 (struct intel_dp *intel_dp);bool intel_dp_get_link_status (struct intel_dp *intel_dp,u8 *link_status); -u16 intel_dp_dsc_get_output_bpp (int link_clock,u8 lane_count, -int mode_clock,int mode_hdisplay); -u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp,int mode_clock, -int mode_hdisplay);bool intel_dp_read_dpcd (struct intel_dp *intel_dp);bool intel_dp_get_colorimetry_status (struct intel_dp *intel_dp);@@ -119,4 +115,6 @@ static inline unsigned int intel_dp_unused_lane_mask(int lane_count) return ~((1 << lane_count) - 1) & 0xf; } +u32 intel_dp_mode_to_fec_clock (u32 mode_clock); +#endif /* __INTEL_DP_H__ */ drivers/gpu/drm/i915/display/intel_dp_mst.c +1
-1@@ -81,7 +81,7 @@ static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder, adjusted_mode->crtc_clock, crtc_state->port_clock, &crtc_state->dp_m_n, - constant_n); + constant_n, crtc_state->fec_enable); crtc_state->dp_m_n.tu = slots;return 0 ;Signature · 1 line
2.20.1Signature · 2 lines
Ville Syrjälä Intel
Re: [Intel-gfx] [PATCH] drm/i915/dp: Fix dsc bpp calculations, v4.
In reply to Ville SyrjäläQuoted 39 lines · Ville Syrjälä
Quoted 38 lines · Maarten Lankhorst
There was a integer wraparound when
mode_clockbecame too high, and we didn't correct for the FEC overhead factor when dividing, with the calculations breaking at HBR3.As a result our calculated bpp was way too high, and the link width limitation never came into effect.
Print out the resulting bpp calcululations as a sanity check, just in case we ever have to debug it later on again.
We also used the wrong factor for FEC. While bspec mentions 2.4%, all the calculations use 1/0.972261, and the same ratio should be applied to data M/N as well, so use it there when FEC is enabled.
Make sure we don't break hw readout, and read out FEC enable state and correct the DDI clock readout for the new values.
This fixes the FIFO underrun we are seeing with FEC enabled.
Changes since v2:
- Handlefec_enableinintel_link_compute_m_n, so only data M/N is adjusted. (Ville)
- Fix initial hardware readout for FEC. (Ville)
Changes since v3:
- Remove bogusfec_to_mode_clock. (Ville)Signed-off-by Maarten Lankhorst <[email protected]>Fixes d9218c8f6cf4 ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC")Cc <[email protected]> # v5.0+Cc Manasi Navare <[email protected]>--- drivers/gpu/drm/i915/display/intel_ddi.c | 17 ++ drivers/gpu/drm/i915/display/intel_display.c | 13 +- drivers/gpu/drm/i915/display/intel_display.h | 2 +- drivers/gpu/drm/i915/display/intel_dp.c | 184 ++++++++++--------- drivers/gpu/drm/i915/display/intel_dp.h | 6 +- drivers/gpu/drm/i915/display/intel_dp_mst.c | 2 +- 6 files changed, 125 insertions(+), 99 deletions(-)
Quoted 14 lines
Quoted 5 lines
drivers/gpu/drm/i915/display/intel_ddi.c +0
-0drivers/gpu/drm/i915/display/intel_ddi.c void intel_ddi_get_config(struct intel_encoder *encoder, · line 4053
Quoted 9 lines
drivers/gpu/drm/i915/display/intel_ddi.c +6
-0@@ -4045,6 +4045,23 @@ void intel_ddi_get_config(struct intel_encoder *encoder, pipe_config->lane_count = ((temp &DDI_PORT_WIDTH_MASK ) >>DDI_PORT_WIDTH_SHIFT ) +1 ;intel_dp_get_m_n (intel_crtc, pipe_config); + +if (INTEL_GEN (dev_priv) >=11 ) { +i915_reg_t dp_tp_ctl; + +if (IS_GEN (dev_priv,11 )) + dp_tp_ctl =DP_TP_CTL (pipe_config->cpu_transcoder);
Oh, and pre-tgl DP_TP_CTL is per port.
Quoted 344 lines
drivers/gpu/drm/i915/display/intel_ddi.c void intel_ddi_get_config(struct intel_encoder *encoder, · line 4058
Quoted 5 lines
drivers/gpu/drm/i915/display/intel_ddi.c +5
-0+else + dp_tp_ctl =TGL_DP_TP_CTL (pipe_config->cpu_transcoder); + + pipe_config->fec_enable = +I915_READ (dp_tp_ctl) &DP_TP_CTL_FEC_ENABLE ;Can you split the
fec_enablereadout/state check into a separate patch?I wonder how the lack of this stuff was missed when FEC was adeed...
drivers/gpu/drm/i915/display/intel_ddi.c void intel_ddi_get_config(struct intel_encoder *encoder, · line 4062
Quoted 4 lines
drivers/gpu/drm/i915/display/intel_ddi.c +4
-0+ +DRM_DEBUG_KMS ("[ENCODER:%d:%s] Fec status: %u\n" , + encoder->base.base.id, encoder->base.name, + pipe_config->fec_enable);I'd just include it as part of the normal state dump.
Quoted 318 lines
drivers/gpu/drm/i915/display/intel_ddi.c +2
-0+ } +break ;case TRANS_DDI_MODE_SELECT_DP_MST : pipe_config->output_types |=BIT (INTEL_OUTPUT_DP_MST );drivers/gpu/drm/i915/display/intel_display.c +9
-4@@ -7291,7 +7291,7 @@ static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc, pipe_config->fdi_lanes = lane;intel_link_compute_m_n (pipe_config->pipe_bpp, lane, fdi_dotclock, - link_bw, &pipe_config->fdi_m_n, false); + link_bw, &pipe_config->fdi_m_n, false, false); ret =ironlake_check_fdi_lanes (dev, intel_crtc->pipe, pipe_config);if (ret == -EDEADLK )@@ -7538,11 +7538,15 @@ void intel_link_compute_m_n(u16 bits_per_pixel, int nlanes, int pixel_clock, int link_clock, struct intel_link_m_n *m_n, - bool constant_n) + bool constant_n, bool fec_enable) { - m_n->tu = 64; + u32 data_clock = bits_per_pixel * pixel_clock; + +if (fec_enable) + data_clock =intel_dp_mode_to_fec_clock (data_clock); -compute_m_n (bits_per_pixel * pixel_clock, + m_n->tu =64 ; +compute_m_n (data_clock, link_clock * nlanes *8 , &m_n->gmch_m, &m_n->gmch_n, constant_n);@@ -12832,6 +12836,7 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,PIPE_CONF_CHECK_BOOL (hdmi_scrambling);PIPE_CONF_CHECK_BOOL (hdmi_high_tmds_clock_ratio);PIPE_CONF_CHECK_BOOL (has_infoframe); +PIPE_CONF_CHECK_BOOL (fec_enable);PIPE_CONF_CHECK_BOOL_INCOMPLETE (has_audio);drivers/gpu/drm/i915/display/intel_display.h +1
-1@@ -443,7 +443,7 @@ enum phy_fia {void intel_link_compute_m_n (u16 bpp,int nlanes,int pixel_clock,int link_clock,struct intel_link_m_n *m_n, -bool constant_n); +bool constant_n,bool fec_enable);bool is_ccs_modifier (u64 modifier);void lpt_disable_clkout_dp (struct drm_i915_private *dev_priv); u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,drivers/gpu/drm/i915/display/intel_dp.c +95
-89@@ -76,8 +76,8 @@#define DP_DSC_MAX_ENC_THROUGHPUT_0 340000#define DP_DSC_MAX_ENC_THROUGHPUT_1 400000 -/* DP DSC FEC Overhead factor = (100 - 2.4)/100 */ -#define DP_DSC_FEC_OVERHEAD_FACTOR 976 +/* DP DSC FEC Overhead factor = 1/(0.972261) */ +#define DP_DSC_FEC_OVERHEAD_FACTOR 972261/* Compliance test status bits */ #define INTEL_DP_RESOLUTION_SHIFT_MASK 0@@ -492,6 +492,97 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,return 0 ; } +u32 intel_dp_mode_to_fec_clock (u32 mode_clock) +{ +return div_u64 (mul_u32_u32 (mode_clock,1000000U ), +DP_DSC_FEC_OVERHEAD_FACTOR ); +} + +static u16 intel_dp_dsc_get_output_bpp (u32 link_clock,u32 lane_count, +u32 mode_clock,u32 mode_hdisplay) +{ +u32 bits_per_pixel, max_bpp_small_joiner_ram; +int i; + +/* +* Available Link Bandwidth(Kbits/sec) = (NumberOfLanes)* +* (LinkSymbolClock)* 8 * (TimeSlotsPerMTP) +* for SST -> TimeSlotsPerMTP is 1, +* for MST -> TimeSlotsPerMTP has to be calculated +*/ + bits_per_pixel = (link_clock * lane_count *8 ) / +intel_dp_mode_to_fec_clock (mode_clock); +DRM_DEBUG_KMS ("Max link bpp: %u\n" , bits_per_pixel); + +/* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */ + max_bpp_small_joiner_ram =DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER / mode_hdisplay; +DRM_DEBUG_KMS ("Max small joiner bpp: %u\n" , max_bpp_small_joiner_ram); + +/* +* Greatest allowed DSC BPP = MIN (output BPP from available Link BW +* check, output bpp from small joiner RAM check) +*/ + bits_per_pixel =min (bits_per_pixel, max_bpp_small_joiner_ram); + +/* Error out if the max bpp is less than smallest allowed valid bpp */ +if (bits_per_pixel < valid_dsc_bpp[0 ]) { +DRM_DEBUG_KMS ("Unsupported BPP %u, min %u\n" , + bits_per_pixel, valid_dsc_bpp[0 ]); +return 0 ; + } + +/* Find the nearest match in the array of known BPPs from VESA */ +for (i =0 ; i <ARRAY_SIZE (valid_dsc_bpp) -1 ; i++) { +if (bits_per_pixel < valid_dsc_bpp[i +1 ]) +break ; + } + bits_per_pixel = valid_dsc_bpp[i]; + +/* +* Compressed BPP in U6.4 format so multiply by 16, for Gen 11, +* fractional part is 0 +*/ +return bits_per_pixel <<4 ; +} + +static u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp, +int mode_clock,int mode_hdisplay) +{ +u8 min_slice_count, i; +int max_slice_width; + +if (mode_clock <=DP_DSC_PEAK_PIXEL_RATE ) + min_slice_count =DIV_ROUND_UP (mode_clock, +DP_DSC_MAX_ENC_THROUGHPUT_0 ); +else + min_slice_count =DIV_ROUND_UP (mode_clock, +DP_DSC_MAX_ENC_THROUGHPUT_1 ); + + max_slice_width =drm_dp_dsc_sink_max_slice_width (intel_dp->dsc_dpcd); +if (max_slice_width <DP_DSC_MIN_SLICE_WIDTH_VALUE ) { +DRM_DEBUG_KMS ("Unsupported slice width %d by DP DSC Sink device\n" , + max_slice_width); +return 0 ; + } +/* Also take into account max slice width */ + min_slice_count =min_t (u8, min_slice_count, +DIV_ROUND_UP (mode_hdisplay, + max_slice_width)); + +/* Find the closest match to the valid slice count values */ +for (i =0 ; i <ARRAY_SIZE (valid_dsc_slicecount); i++) { +if (valid_dsc_slicecount[i] > +drm_dp_dsc_sink_max_slice_count (intel_dp->dsc_dpcd, + false)) +break ; +if (min_slice_count <= valid_dsc_slicecount[i]) +return valid_dsc_slicecount[i]; + } + +DRM_DEBUG_KMS ("Unsupported Slice Count %d\n" , min_slice_count); +return 0 ; +} +static enum drm_mode_status intel_dp_mode_valid (struct drm_connector *connector,struct drm_display_mode *mode)@@ -2259,7 +2350,7 @@ intel_dp_compute_config(struct intel_encoder *encoder, adjusted_mode->crtc_clock, pipe_config->port_clock, &pipe_config->dp_m_n, - constant_n); + constant_n, pipe_config->fec_enable);if (intel_connector->panel.downclock_mode !=NULL && dev_priv->drrs.type ==SEAMLESS_DRRS_SUPPORT ) {@@ -2269,7 +2360,7 @@ intel_dp_compute_config(struct intel_encoder *encoder, intel_connector->panel.downclock_mode->clock, pipe_config->port_clock, &pipe_config->dp_m2_n2, - constant_n); + constant_n, pipe_config->fec_enable); }if (!HAS_DDI (dev_priv))@@ -4373,91 +4464,6 @@ intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8 *sink_irq_vector)DP_DPRX_ESI_LEN ; } -u16 intel_dp_dsc_get_output_bpp (int link_clock,u8 lane_count, -int mode_clock,int mode_hdisplay) -{ -u16 bits_per_pixel, max_bpp_small_joiner_ram; -int i; - -/* -* Available Link Bandwidth(Kbits/sec) = (NumberOfLanes)* -* (LinkSymbolClock)* 8 * ((100-FECOverhead)/100)*(TimeSlotsPerMTP) -* FECOverhead = 2.4%, for SST -> TimeSlotsPerMTP is 1, -* for MST -> TimeSlotsPerMTP has to be calculated -*/ - bits_per_pixel = (link_clock * lane_count *8 * -DP_DSC_FEC_OVERHEAD_FACTOR ) / - mode_clock; - -/* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */ - max_bpp_small_joiner_ram =DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER / - mode_hdisplay; - -/* -* Greatest allowed DSC BPP = MIN (output BPP from avaialble Link BW -* check, output bpp from small joiner RAM check) -*/ - bits_per_pixel =min (bits_per_pixel, max_bpp_small_joiner_ram); - -/* Error out if the max bpp is less than smallest allowed valid bpp */ -if (bits_per_pixel < valid_dsc_bpp[0 ]) { -DRM_DEBUG_KMS ("Unsupported BPP %d\n" , bits_per_pixel); -return 0 ; - } - -/* Find the nearest match in the array of known BPPs from VESA */ -for (i =0 ; i <ARRAY_SIZE (valid_dsc_bpp) -1 ; i++) { -if (bits_per_pixel < valid_dsc_bpp[i +1 ]) -break ; - } - bits_per_pixel = valid_dsc_bpp[i]; - -/* -* Compressed BPP in U6.4 format so multiply by 16, for Gen 11, -* fractional part is 0 -*/ -return bits_per_pixel <<4 ; -} - -u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp, -int mode_clock, -int mode_hdisplay) -{ -u8 min_slice_count, i; -int max_slice_width; - -if (mode_clock <=DP_DSC_PEAK_PIXEL_RATE ) - min_slice_count =DIV_ROUND_UP (mode_clock, -DP_DSC_MAX_ENC_THROUGHPUT_0 ); -else - min_slice_count =DIV_ROUND_UP (mode_clock, -DP_DSC_MAX_ENC_THROUGHPUT_1 ); - - max_slice_width =drm_dp_dsc_sink_max_slice_width (intel_dp->dsc_dpcd); -if (max_slice_width <DP_DSC_MIN_SLICE_WIDTH_VALUE ) { -DRM_DEBUG_KMS ("Unsupported slice width %d by DP DSC Sink device\n" , - max_slice_width); -return 0 ; - } -/* Also take into account max slice width */ - min_slice_count =min_t (u8, min_slice_count, -DIV_ROUND_UP (mode_hdisplay, - max_slice_width)); - -/* Find the closest match to the valid slice count values */ -for (i =0 ; i <ARRAY_SIZE (valid_dsc_slicecount); i++) { -if (valid_dsc_slicecount[i] > -drm_dp_dsc_sink_max_slice_count (intel_dp->dsc_dpcd, - false)) -break ; -if (min_slice_count <= valid_dsc_slicecount[i]) -return valid_dsc_slicecount[i]; - } - -DRM_DEBUG_KMS ("Unsupported Slice Count %d\n" , min_slice_count); -return 0 ; -} -static void intel_pixel_encoding_setup_vsc (struct intel_dp *intel_dp,const struct intel_crtc_state *crtc_state)drivers/gpu/drm/i915/display/intel_dp.h +2
-4@@ -103,10 +103,6 @@ bool intel_dp_source_supports_hbr2(struct intel_dp *intel_dp);bool intel_dp_source_supports_hbr3 (struct intel_dp *intel_dp);bool intel_dp_get_link_status (struct intel_dp *intel_dp,u8 *link_status); -u16 intel_dp_dsc_get_output_bpp (int link_clock,u8 lane_count, -int mode_clock,int mode_hdisplay); -u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp,int mode_clock, -int mode_hdisplay);bool intel_dp_read_dpcd (struct intel_dp *intel_dp);bool intel_dp_get_colorimetry_status (struct intel_dp *intel_dp);@@ -119,4 +115,6 @@ static inline unsigned int intel_dp_unused_lane_mask(int lane_count) return ~((1 << lane_count) - 1) & 0xf; } +u32 intel_dp_mode_to_fec_clock (u32 mode_clock); +#endif /* __INTEL_DP_H__ */ drivers/gpu/drm/i915/display/intel_dp_mst.c +1
-1@@ -81,7 +81,7 @@ static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder, adjusted_mode->crtc_clock, crtc_state->port_clock, &crtc_state->dp_m_n, - constant_n); + constant_n, crtc_state->fec_enable); crtc_state->dp_m_n.tu = slots;return 0 ;Signature · 1 line
2.20.1Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 2 lines
Ville Syrjälä Intel
kbuild test robot
build botRe: [PATCH] drm/i915/dp: Fix dsc bpp calculations, v3.
In reply to Maarten LankhorstI love your patch! Yet something to improve:
Hi Maarten,
I love your patch! Yet something to improve:
[auto build test ERROR on drm-intel/for-linux-next]
[cannot apply to v5.3 next-20190920]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system. BTW, we also suggest to use '--base' option to specify the base tree in git format-patch, please see https://stackoverflow.com/a/37406982]
url: https://github.com/0day-ci/linux/commits/Maarten-Lankhorst/drm-i915-dp-Fix-dsc-bpp-calculations-v3/20190923-205540 base: git://anongit.freedesktop.org/drm-intel for-linux-next config: i386-defconfig (attached as .config) compiler: gcc-7 (Debian 7.4.0-13) 7.4.0 reproduce: # save the attached .config to linux build tree make ARCH=i386
If you fix the issue, kindly add following tag
All errors (new ones prefixed by >>):
drivers/gpu/drm/i915/display/intel_ddi.c: In function 'intel_ddi_get_config':
>> drivers/gpu/drm/i915/display/intel_ddi.c:3905:17: error: implicit declaration of function 'TGL_DP_TP_CTL'; did you mean 'DP_TP_CTL'? [-Werror=implicit-function-declaration]
dp_tp_ctl = TGL_DP_TP_CTL(pipe_config->cpu_transcoder);
^~~~~~~~~~~~~
DP_TP_CTL
>> drivers/gpu/drm/i915/display/intel_ddi.c:3905:15: error: incompatible types when assigning to type 'i915_reg_t {aka struct <anonymous>}' from type 'int'
dp_tp_ctl = TGL_DP_TP_CTL(pipe_config->cpu_transcoder);
^cc1: some warnings being treated as errors
vim +3905 drivers/gpu/drm/i915/display/intel_ddi.c
3826
3827 void intel_ddi_get_config(struct intel_encoder *encoder,
3828 struct intel_crtc_state *pipe_config)
3829 {
3830 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
3831 struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->base.crtc);
3832 enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
3833 u32 temp, flags = 0;
3834
3835 /* XXX: DSI transcoder paranoia */
3836 if (WARN_ON(transcoder_is_dsi(cpu_transcoder)))
3837 return;
3838
3839 temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
3840 if (temp & TRANS_DDI_PHSYNC)
3841 flags |= DRM_MODE_FLAG_PHSYNC;
3842 else
3843 flags |= DRM_MODE_FLAG_NHSYNC;
3844 if (temp & TRANS_DDI_PVSYNC)
3845 flags |= DRM_MODE_FLAG_PVSYNC;
3846 else
3847 flags |= DRM_MODE_FLAG_NVSYNC;
3848
3849 pipe_config->base.adjusted_mode.flags |= flags;
3850
3851 switch (temp & TRANS_DDI_BPC_MASK) {
3852 case TRANS_DDI_BPC_6:
3853 pipe_config->pipe_bpp = 18;
3854 break;
3855 case TRANS_DDI_BPC_8:
3856 pipe_config->pipe_bpp = 24;
3857 break;
3858 case TRANS_DDI_BPC_10:
3859 pipe_config->pipe_bpp = 30;
3860 break;
3861 case TRANS_DDI_BPC_12:
3862 pipe_config->pipe_bpp = 36;
3863 break;
3864 default:
3865 break;
3866 }
3867
3868 switch (temp & TRANS_DDI_MODE_SELECT_MASK) {
3869 case TRANS_DDI_MODE_SELECT_HDMI:
3870 pipe_config->has_hdmi_sink = true;
3871
3872 pipe_config->infoframes.enable |=
3873 intel_hdmi_infoframes_enabled(encoder, pipe_config);
3874
3875 if (pipe_config->infoframes.enable)
3876 pipe_config->has_infoframe = true;
3877
3878 if (temp & TRANS_DDI_HDMI_SCRAMBLING)
3879 pipe_config->hdmi_scrambling = true;
3880 if (temp & TRANS_DDI_HIGH_TMDS_CHAR_RATE)
3881 pipe_config->hdmi_high_tmds_clock_ratio = true;
3882 /* fall through */
3883 case TRANS_DDI_MODE_SELECT_DVI:
3884 pipe_config->output_types |= BIT(INTEL_OUTPUT_HDMI);
3885 pipe_config->lane_count = 4;
3886 break;
3887 case TRANS_DDI_MODE_SELECT_FDI:
3888 pipe_config->output_types |= BIT(INTEL_OUTPUT_ANALOG);
3889 break;
3890 case TRANS_DDI_MODE_SELECT_DP_SST:
3891 if (encoder->type == INTEL_OUTPUT_EDP)
3892 pipe_config->output_types |= BIT(INTEL_OUTPUT_EDP);
3893 else
3894 pipe_config->output_types |= BIT(INTEL_OUTPUT_DP);
3895 pipe_config->lane_count =
3896 ((temp & DDI_PORT_WIDTH_MASK) >> DDI_PORT_WIDTH_SHIFT) + 1;
3897 intel_dp_get_m_n(intel_crtc, pipe_config);
3898
3899 if (INTEL_GEN(dev_priv) >= 11) {
3900 i915_reg_t dp_tp_ctl;
3901
3902 if (IS_GEN(dev_priv, 11))
3903 dp_tp_ctl = DP_TP_CTL(pipe_config->cpu_transcoder);
3904 else
> 3905 dp_tp_ctl = TGL_DP_TP_CTL(pipe_config->cpu_transcoder);
3906
3907 pipe_config->fec_enable =
3908 I915_READ(dp_tp_ctl) & DP_TP_CTL_FEC_ENABLE;
3909
3910 DRM_DEBUG_KMS("[ENCODER:%d:%s] Fec status: %u\n",
3911 encoder->base.base.id, encoder->base.name,
3912 pipe_config->fec_enable);
3913 }
3914
3915 break;
3916 case TRANS_DDI_MODE_SELECT_DP_MST:
3917 pipe_config->output_types |= BIT(INTEL_OUTPUT_DP_MST);
3918 pipe_config->lane_count =
3919 ((temp & DDI_PORT_WIDTH_MASK) >> DDI_PORT_WIDTH_SHIFT) + 1;
3920 intel_dp_get_m_n(intel_crtc, pipe_config);
3921 break;
3922 default:
3923 break;
3924 }
3925
3926 pipe_config->has_audio =
3927 intel_ddi_is_audio_enabled(dev_priv, cpu_transcoder);
3928
3929 if (encoder->type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.bpp &&
3930 pipe_config->pipe_bpp > dev_priv->vbt.edp.bpp) {
3931 /*
3932 * This is a big fat ugly hack.
3933 *
3934 * Some machines in UEFI boot mode provide us a VBT that has 18
3935 * bpp and 1.62 GHz link bandwidth for eDP, which for reasons
3936 * unknown we fail to light up. Yet the same BIOS boots up with
3937 * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as
3938 * max, not what it tells us to use.
3939 *
3940 * Note: This will still be broken if the eDP panel is not lit
3941 * up by the BIOS, and thus we can't get the mode at module
3942 * load.
3943 */
3944 DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n",
3945 pipe_config->pipe_bpp, dev_priv->vbt.edp.bpp);
3946 dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp;
3947 }
3948
3949 intel_ddi_clock_get(encoder, pipe_config);
3950
3951 if (IS_GEN9_LP(dev_priv))
3952 pipe_config->lane_lat_optim_mask =
3953 bxt_ddi_phy_get_lane_lat_optim_mask(encoder);
3954
3955 intel_ddi_compute_min_voltage_level(dev_priv, pipe_config);
3956
3957 intel_hdmi_read_gcp_infoframe(encoder, pipe_config);
3958
3959 intel_read_infoframe(encoder, pipe_config,
3960 HDMI_INFOFRAME_TYPE_AVI,
3961 &pipe_config->infoframes.avi);
3962 intel_read_infoframe(encoder, pipe_config,
3963 HDMI_INFOFRAME_TYPE_SPD,
3964 &pipe_config->infoframes.spd);
3965 intel_read_infoframe(encoder, pipe_config,
3966 HDMI_INFOFRAME_TYPE_VENDOR,
3967 &pipe_config->infoframes.hdmi);
3968 intel_read_infoframe(encoder, pipe_config,
3969 HDMI_INFOFRAME_TYPE_DRM,
3970 &pipe_config->infoframes.drm);
3971 }
3972
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH] drm/i915/dp: Fix dsc bpp calculations, v3.
In reply to Maarten LankhorstQuoted 23 lines · Maarten Lankhorst
There was a integer wraparound when
mode_clockbecame too high, and we didn't correct for the FEC overhead factor when dividing, with the calculations breaking at HBR3.As a result our calculated bpp was way too high, and the link width limitation never came into effect.
Print out the resulting bpp calcululations as a sanity check, just in case we ever have to debug it later on again.
We also used the wrong factor for FEC. While bspec mentions 2.4%, all the calculations use 1/0.972261, and the same ratio should be applied to data M/N as well, so use it there when FEC is enabled.
Make sure we don't break hw readout, and read out FEC enable state and correct the DDI clock readout for the new values.
This fixes the FIFO underrun we are seeing with FEC enabled.
Changes since v2:
- Handlefec_enableinintel_link_compute_m_n, so only data M/N is adjusted. (Ville)
- Fix initial hardware readout for FEC. (Ville)
Quoted 7 lines
Signed-off-by Maarten Lankhorst <[email protected]>Fixes d9218c8f6cf4 ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC")Cc <[email protected]> # v5.0+Cc Manasi Navare <[email protected]>---
Thanks, that fixed the FIFO underrun, making the disablement patch obsolete. Bigjoiner is now completely working as intended. :)
Thats great, so the FEC adjustments in the compute m_n was the thing that was mising because of which we were seeing the underruns?
I think Anusha missed it when she implemented FEC along with DSC because back then we only had eDP DSC panels where we do no enable FEC and didnt have any FEC DSC DP panels.
Thanks for tha catch and the fix.
Regards
Manasi
Quoted 370 lines
drivers/gpu/drm/i915/display/intel_ddi.c | 21 ++ drivers/gpu/drm/i915/display/intel_display.c | 13 +- drivers/gpu/drm/i915/display/intel_display.h | 2 +- drivers/gpu/drm/i915/display/intel_dp.c | 191 ++++++++++--------- drivers/gpu/drm/i915/display/intel_dp.h | 7 +- drivers/gpu/drm/i915/display/intel_dp_mst.c | 2 +- 6 files changed, 137 insertions(+), 99 deletions(-)drivers/gpu/drm/i915/display/intel_ddi.c +21
-0@@ -1479,6 +1479,10 @@ static void ddi_dotclock_get(struct intel_crtc_state *pipe_config)if (pipe_config->pixel_multiplier) dotclock /= pipe_config->pixel_multiplier; +/* fec adds overhead to the data M/N values, correct for it */ +if (pipe_config->fec_enable) + dotclock =intel_dp_fec_to_mode_clock (dotclock); + pipe_config->base.adjusted_mode.crtc_clock = dotclock; }@@ -4045,6 +4049,23 @@ void intel_ddi_get_config(struct intel_encoder *encoder, pipe_config->lane_count = ((temp &DDI_PORT_WIDTH_MASK ) >>DDI_PORT_WIDTH_SHIFT ) +1 ;intel_dp_get_m_n (intel_crtc, pipe_config); + +if (INTEL_GEN (dev_priv) >=11 ) { +i915_reg_t dp_tp_ctl; + +if (IS_GEN (dev_priv,11 )) + dp_tp_ctl =DP_TP_CTL (pipe_config->cpu_transcoder); +else + dp_tp_ctl =TGL_DP_TP_CTL (pipe_config->cpu_transcoder); + + pipe_config->fec_enable = +I915_READ (dp_tp_ctl) &DP_TP_CTL_FEC_ENABLE ; + +DRM_DEBUG_KMS ("[ENCODER:%d:%s] Fec status: %u\n" , + encoder->base.base.id, encoder->base.name, + pipe_config->fec_enable); + } +break ;case TRANS_DDI_MODE_SELECT_DP_MST : pipe_config->output_types |=BIT (INTEL_OUTPUT_DP_MST );drivers/gpu/drm/i915/display/intel_display.c +9
-4@@ -7291,7 +7291,7 @@ static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc, pipe_config->fdi_lanes = lane;intel_link_compute_m_n (pipe_config->pipe_bpp, lane, fdi_dotclock, - link_bw, &pipe_config->fdi_m_n, false); + link_bw, &pipe_config->fdi_m_n, false, false); ret =ironlake_check_fdi_lanes (dev, intel_crtc->pipe, pipe_config);if (ret == -EDEADLK )@@ -7538,11 +7538,15 @@ void intel_link_compute_m_n(u16 bits_per_pixel, int nlanes, int pixel_clock, int link_clock, struct intel_link_m_n *m_n, - bool constant_n) + bool constant_n, bool fec_enable) { - m_n->tu = 64; + u32 data_clock = bits_per_pixel * pixel_clock; + +if (fec_enable) + data_clock =intel_dp_mode_to_fec_clock (data_clock); -compute_m_n (bits_per_pixel * pixel_clock, + m_n->tu =64 ; +compute_m_n (data_clock, link_clock * nlanes *8 , &m_n->gmch_m, &m_n->gmch_n, constant_n);@@ -12832,6 +12836,7 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,PIPE_CONF_CHECK_BOOL (hdmi_scrambling);PIPE_CONF_CHECK_BOOL (hdmi_high_tmds_clock_ratio);PIPE_CONF_CHECK_BOOL (has_infoframe); +PIPE_CONF_CHECK_BOOL (fec_enable);PIPE_CONF_CHECK_BOOL_INCOMPLETE (has_audio);drivers/gpu/drm/i915/display/intel_display.h +1
-1@@ -443,7 +443,7 @@ enum phy_fia {void intel_link_compute_m_n (u16 bpp,int nlanes,int pixel_clock,int link_clock,struct intel_link_m_n *m_n, -bool constant_n); +bool constant_n,bool fec_enable);bool is_ccs_modifier (u64 modifier);void lpt_disable_clkout_dp (struct drm_i915_private *dev_priv); u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,drivers/gpu/drm/i915/display/intel_dp.c +102
-89@@ -76,8 +76,8 @@#define DP_DSC_MAX_ENC_THROUGHPUT_0 340000#define DP_DSC_MAX_ENC_THROUGHPUT_1 400000 -/* DP DSC FEC Overhead factor = (100 - 2.4)/100 */ -#define DP_DSC_FEC_OVERHEAD_FACTOR 976 +/* DP DSC FEC Overhead factor = 1/(0.972261) */ +#define DP_DSC_FEC_OVERHEAD_FACTOR 972261/* Compliance test status bits */ #define INTEL_DP_RESOLUTION_SHIFT_MASK 0@@ -492,6 +492,104 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,return 0 ; } +u32 intel_dp_mode_to_fec_clock (u32 mode_clock) +{ +return div_u64 (mul_u32_u32 (mode_clock,1000000U ), +DP_DSC_FEC_OVERHEAD_FACTOR ); +} + +u32 intel_dp_fec_to_mode_clock (u32 fec_clock) +{ +return div_u64 (mul_u32_u32 (fec_clock, +DP_DSC_FEC_OVERHEAD_FACTOR ), +1000000U ); +} + +static u16 intel_dp_dsc_get_output_bpp (u32 link_clock,u32 lane_count, +u32 mode_clock,u32 mode_hdisplay) +{ +u32 bits_per_pixel, max_bpp_small_joiner_ram; +int i; + +/* +* Available Link Bandwidth(Kbits/sec) = (NumberOfLanes)* +* (LinkSymbolClock)* 8 * (TimeSlotsPerMTP) +* for SST -> TimeSlotsPerMTP is 1, +* for MST -> TimeSlotsPerMTP has to be calculated +*/ + bits_per_pixel = (link_clock * lane_count *8 ) / +intel_dp_mode_to_fec_clock (mode_clock); +DRM_DEBUG_KMS ("Max link bpp: %u\n" , bits_per_pixel); + +/* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */ + max_bpp_small_joiner_ram =DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER / mode_hdisplay; +DRM_DEBUG_KMS ("Max small joiner bpp: %u\n" , max_bpp_small_joiner_ram); + +/* +* Greatest allowed DSC BPP = MIN (output BPP from available Link BW +* check, output bpp from small joiner RAM check) +*/ + bits_per_pixel =min (bits_per_pixel, max_bpp_small_joiner_ram); + +/* Error out if the max bpp is less than smallest allowed valid bpp */ +if (bits_per_pixel < valid_dsc_bpp[0 ]) { +DRM_DEBUG_KMS ("Unsupported BPP %u, min %u\n" , + bits_per_pixel, valid_dsc_bpp[0 ]); +return 0 ; + } + +/* Find the nearest match in the array of known BPPs from VESA */ +for (i =0 ; i <ARRAY_SIZE (valid_dsc_bpp) -1 ; i++) { +if (bits_per_pixel < valid_dsc_bpp[i +1 ]) +break ; + } + bits_per_pixel = valid_dsc_bpp[i]; + +/* +* Compressed BPP in U6.4 format so multiply by 16, for Gen 11, +* fractional part is 0 +*/ +return bits_per_pixel <<4 ; +} + +static u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp, +int mode_clock,int mode_hdisplay) +{ +u8 min_slice_count, i; +int max_slice_width; + +if (mode_clock <=DP_DSC_PEAK_PIXEL_RATE ) + min_slice_count =DIV_ROUND_UP (mode_clock, +DP_DSC_MAX_ENC_THROUGHPUT_0 ); +else + min_slice_count =DIV_ROUND_UP (mode_clock, +DP_DSC_MAX_ENC_THROUGHPUT_1 ); + + max_slice_width =drm_dp_dsc_sink_max_slice_width (intel_dp->dsc_dpcd); +if (max_slice_width <DP_DSC_MIN_SLICE_WIDTH_VALUE ) { +DRM_DEBUG_KMS ("Unsupported slice width %d by DP DSC Sink device\n" , + max_slice_width); +return 0 ; + } +/* Also take into account max slice width */ + min_slice_count =min_t (u8, min_slice_count, +DIV_ROUND_UP (mode_hdisplay, + max_slice_width)); + +/* Find the closest match to the valid slice count values */ +for (i =0 ; i <ARRAY_SIZE (valid_dsc_slicecount); i++) { +if (valid_dsc_slicecount[i] > +drm_dp_dsc_sink_max_slice_count (intel_dp->dsc_dpcd, + false)) +break ; +if (min_slice_count <= valid_dsc_slicecount[i]) +return valid_dsc_slicecount[i]; + } + +DRM_DEBUG_KMS ("Unsupported Slice Count %d\n" , min_slice_count); +return 0 ; +} +static enum drm_mode_status intel_dp_mode_valid (struct drm_connector *connector,struct drm_display_mode *mode)@@ -2259,7 +2357,7 @@ intel_dp_compute_config(struct intel_encoder *encoder, adjusted_mode->crtc_clock, pipe_config->port_clock, &pipe_config->dp_m_n, - constant_n); + constant_n, pipe_config->fec_enable);if (intel_connector->panel.downclock_mode !=NULL && dev_priv->drrs.type ==SEAMLESS_DRRS_SUPPORT ) {@@ -2269,7 +2367,7 @@ intel_dp_compute_config(struct intel_encoder *encoder, intel_connector->panel.downclock_mode->clock, pipe_config->port_clock, &pipe_config->dp_m2_n2, - constant_n); + constant_n, pipe_config->fec_enable); }if (!HAS_DDI (dev_priv))@@ -4373,91 +4471,6 @@ intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8 *sink_irq_vector)DP_DPRX_ESI_LEN ; } -u16 intel_dp_dsc_get_output_bpp (int link_clock,u8 lane_count, -int mode_clock,int mode_hdisplay) -{ -u16 bits_per_pixel, max_bpp_small_joiner_ram; -int i; - -/* -* Available Link Bandwidth(Kbits/sec) = (NumberOfLanes)* -* (LinkSymbolClock)* 8 * ((100-FECOverhead)/100)*(TimeSlotsPerMTP) -* FECOverhead = 2.4%, for SST -> TimeSlotsPerMTP is 1, -* for MST -> TimeSlotsPerMTP has to be calculated -*/ - bits_per_pixel = (link_clock * lane_count *8 * -DP_DSC_FEC_OVERHEAD_FACTOR ) / - mode_clock; - -/* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */ - max_bpp_small_joiner_ram =DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER / - mode_hdisplay; - -/* -* Greatest allowed DSC BPP = MIN (output BPP from avaialble Link BW -* check, output bpp from small joiner RAM check) -*/ - bits_per_pixel =min (bits_per_pixel, max_bpp_small_joiner_ram); - -/* Error out if the max bpp is less than smallest allowed valid bpp */ -if (bits_per_pixel < valid_dsc_bpp[0 ]) { -DRM_DEBUG_KMS ("Unsupported BPP %d\n" , bits_per_pixel); -return 0 ; - } - -/* Find the nearest match in the array of known BPPs from VESA */ -for (i =0 ; i <ARRAY_SIZE (valid_dsc_bpp) -1 ; i++) { -if (bits_per_pixel < valid_dsc_bpp[i +1 ]) -break ; - } - bits_per_pixel = valid_dsc_bpp[i]; - -/* -* Compressed BPP in U6.4 format so multiply by 16, for Gen 11, -* fractional part is 0 -*/ -return bits_per_pixel <<4 ; -} - -u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp, -int mode_clock, -int mode_hdisplay) -{ -u8 min_slice_count, i; -int max_slice_width; - -if (mode_clock <=DP_DSC_PEAK_PIXEL_RATE ) - min_slice_count =DIV_ROUND_UP (mode_clock, -DP_DSC_MAX_ENC_THROUGHPUT_0 ); -else - min_slice_count =DIV_ROUND_UP (mode_clock, -DP_DSC_MAX_ENC_THROUGHPUT_1 ); - - max_slice_width =drm_dp_dsc_sink_max_slice_width (intel_dp->dsc_dpcd); -if (max_slice_width <DP_DSC_MIN_SLICE_WIDTH_VALUE ) { -DRM_DEBUG_KMS ("Unsupported slice width %d by DP DSC Sink device\n" , - max_slice_width); -return 0 ; - } -/* Also take into account max slice width */ - min_slice_count =min_t (u8, min_slice_count, -DIV_ROUND_UP (mode_hdisplay, - max_slice_width)); - -/* Find the closest match to the valid slice count values */ -for (i =0 ; i <ARRAY_SIZE (valid_dsc_slicecount); i++) { -if (valid_dsc_slicecount[i] > -drm_dp_dsc_sink_max_slice_count (intel_dp->dsc_dpcd, - false)) -break ; -if (min_slice_count <= valid_dsc_slicecount[i]) -return valid_dsc_slicecount[i]; - } - -DRM_DEBUG_KMS ("Unsupported Slice Count %d\n" , min_slice_count); -return 0 ; -} -static void intel_pixel_encoding_setup_vsc (struct intel_dp *intel_dp,const struct intel_crtc_state *crtc_state)drivers/gpu/drm/i915/display/intel_dp.h +3
-4@@ -103,10 +103,6 @@ bool intel_dp_source_supports_hbr2(struct intel_dp *intel_dp);bool intel_dp_source_supports_hbr3 (struct intel_dp *intel_dp);bool intel_dp_get_link_status (struct intel_dp *intel_dp,u8 *link_status); -u16 intel_dp_dsc_get_output_bpp (int link_clock,u8 lane_count, -int mode_clock,int mode_hdisplay); -u8 intel_dp_dsc_get_slice_count (struct intel_dp *intel_dp,int mode_clock, -int mode_hdisplay);bool intel_dp_read_dpcd (struct intel_dp *intel_dp);bool intel_dp_get_colorimetry_status (struct intel_dp *intel_dp);@@ -119,4 +115,7 @@ static inline unsigned int intel_dp_unused_lane_mask(int lane_count) return ~((1 << lane_count) - 1) & 0xf; } +u32 intel_dp_fec_to_mode_clock (u32 fec_clock); +u32 intel_dp_mode_to_fec_clock (u32 mode_clock); +#endif /* __INTEL_DP_H__ */ drivers/gpu/drm/i915/display/intel_dp_mst.c +1
-1@@ -81,7 +81,7 @@ static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder, adjusted_mode->crtc_clock, crtc_state->port_clock, &crtc_state->dp_m_n, - constant_n); + constant_n, crtc_state->fec_enable); crtc_state->dp_m_n.tu = slots;return 0 ;Signature · 1 line
2.20.1
Sasha Levin
maintainerHi,
[This is an automated email]
This commit has been processed because it contains a "Fixes:" tag,
fixing commit: d9218c8f6cf4 drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC.
The bot has tested the following trees: v5.2.16.
v5.2.16: Failed to apply! Possible dependencies:
3c053a96ef5f ("drm/i915/dp: Program VSC Header and DB for Pixel Encoding/Colorimetry Format")
7afc7f816870 ("drm/i915: Drop the _INCOMPLETE for has_infoframe")
8e9d645c6831 ("drm/i915/dp: Add a config function for YCBCR420 outputs")NOTE: The patch will not be queued to stable trees until it is upstream.
How should we proceed with this patch?
--
Thanks,
Sasha
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.IGT: failure for series starting with [01/23] drm/i915/dp: Fix dsc bpp calculations, v2.
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: series starting with [01/23] drm/i915/dp: Fix dsc bpp calculations, v2.
URL : https://patchwork.freedesktop.org/series/66998/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_6928_full -> Patchwork_14476_full
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with Patchwork_14476_full absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_14476_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in Patchwork_14476_full:
### IGT changes ###
#### Possible regressions ####
* igt@kms_plane_lowres@pipe-a-tiling-x:
- shard-snb: [PASS][1] -> [FAIL][2] +3 similar issues
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-snb6/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-snb2/igt@[email protected]
* igt@kms_plane_lowres@pipe-a-tiling-yf:
- shard-skl: [PASS][3] -> [FAIL][4] +11 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-skl7/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-skl8/igt@[email protected]
* igt@kms_plane_lowres@pipe-b-tiling-x:
- shard-glk: [PASS][5] -> [FAIL][6] +11 similar issues
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-glk2/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-glk2/igt@[email protected]
- shard-apl: [PASS][7] -> [FAIL][8] +8 similar issues
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-apl4/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-apl4/igt@[email protected]
* igt@kms_plane_lowres@pipe-b-tiling-y:
- shard-iclb: NOTRUN -> [FAIL][9]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb5/igt@[email protected]
* igt@kms_plane_lowres@pipe-c-tiling-none:
- shard-iclb: [PASS][10] -> [FAIL][11] +10 similar issues
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb4/igt@[email protected]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb5/igt@[email protected]
- shard-hsw: [PASS][12] -> [FAIL][13] +5 similar issues
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-hsw5/igt@[email protected]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-hsw4/igt@[email protected]
* igt@kms_plane_lowres@pipe-c-tiling-y:
- shard-apl: NOTRUN -> [FAIL][14]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-apl6/igt@[email protected]
* igt@kms_plane_lowres@pipe-c-tiling-yf:
- shard-kbl: [PASS][15] -> [FAIL][16] +11 similar issues
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-kbl1/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-kbl3/igt@[email protected]
Known issues
------------
Here are the changes found in Patchwork_14476_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_ctx_shared@exec-single-timeline-bsd:
- shard-iclb: [PASS][17] -> [SKIP][18] ([fdo#110841])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb6/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb1/igt@[email protected]
* igt@gem_exec_schedule@preempt-queue-bsd1:
- shard-iclb: [PASS][19] -> [SKIP][20] ([fdo#109276]) +37 similar issues
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb4/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb5/igt@[email protected]
* igt@gem_exec_schedule@reorder-wide-bsd:
- shard-iclb: [PASS][21] -> [SKIP][22] ([fdo#111325]) +6 similar issues
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb3/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb2/igt@[email protected]
* igt@kms_cursor_crc@pipe-b-cursor-64x21-offscreen:
- shard-apl: [PASS][23] -> [INCOMPLETE][24] ([fdo#103927]) +3 similar issues
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-apl1/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-apl6/igt@[email protected]
* igt@kms_cursor_legacy@2x-long-cursor-vs-flip-legacy:
- shard-hsw: [PASS][25] -> [FAIL][26] ([fdo#105767])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-hsw5/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-hsw4/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-shrfb-plflip-blt:
- shard-iclb: [PASS][27] -> [FAIL][28] ([fdo#103167]) +4 similar issues
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb4/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb5/igt@[email protected]
* igt@kms_plane@pixel-format-pipe-a-planes:
- shard-iclb: [PASS][29] -> [DMESG-FAIL][30] ([fdo#107724]) +5 similar issues
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb3/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb2/igt@[email protected]
* igt@kms_plane_scaling@pipe-b-scaler-with-rotation:
- shard-iclb: [PASS][31] -> [DMESG-WARN][32] ([fdo#107724]) +7 similar issues
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb6/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb3/igt@[email protected]
* igt@kms_psr@psr2_sprite_plane_move:
- shard-iclb: [PASS][33] -> [SKIP][34] ([fdo#109441]) +4 similar issues
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb2/igt@kms_psr@psr2_sprite_plane_move.html
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb3/igt@kms_psr@psr2_sprite_plane_move.html
* igt@kms_rotation_crc@bad-pixel-format:
- shard-iclb: [PASS][35] -> [DMESG-WARN][36] ([fdo#107724] / [fdo#108336])
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb4/igt@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb5/igt@[email protected]
* igt@kms_vblank@pipe-b-ts-continuation-suspend:
- shard-apl: [PASS][37] -> [DMESG-WARN][38] ([fdo#108566]) +3 similar issues
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-apl8/igt@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-apl3/igt@[email protected]
* igt@kms_vblank@pipe-c-query-forked-hang:
- shard-hsw: [PASS][39] -> [INCOMPLETE][40] ([fdo#103540])
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-hsw5/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-hsw6/igt@[email protected]
#### Possible fixes ####
* igt@gem_exec_schedule@independent-bsd2:
- shard-iclb: [SKIP][41] ([fdo#109276]) -> [PASS][42] +14 similar issues
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb3/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb2/igt@[email protected]
* igt@gem_exec_schedule@preemptive-hang-bsd:
- shard-iclb: [SKIP][43] ([fdo#111325]) -> [PASS][44] +7 similar issues
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb1/igt@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb5/igt@[email protected]
* igt@gem_tiled_swapping@non-threaded:
- shard-glk: [DMESG-WARN][45] ([fdo#108686]) -> [PASS][46]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-glk4/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-glk4/igt@[email protected]
* igt@i915_suspend@sysfs-reader:
- shard-apl: [DMESG-WARN][47] ([fdo#108566]) -> [PASS][48] +4 similar issues
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-apl1/igt@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-apl2/igt@[email protected]
* igt@kms_cursor_crc@pipe-c-cursor-suspend:
- shard-skl: [INCOMPLETE][49] ([fdo#110741]) -> [PASS][50]
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-skl6/igt@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-skl7/igt@[email protected]
* igt@kms_flip@flip-vs-dpms-interruptible:
- shard-iclb: [INCOMPLETE][51] ([fdo#107713]) -> [PASS][52]
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb1/igt@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb5/igt@[email protected]
* igt@kms_flip@flip-vs-suspend-interruptible:
- shard-snb: [DMESG-WARN][53] ([fdo#102365]) -> [PASS][54]
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-snb4/igt@[email protected]
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-snb2/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-indfb-draw-pwrite:
- shard-iclb: [FAIL][55] ([fdo#103167]) -> [PASS][56] +2 similar issues
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb1/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-indfb-draw-pwrite.html
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb6/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-indfb-draw-pwrite.html
* igt@kms_frontbuffer_tracking@psr-suspend:
- shard-skl: [INCOMPLETE][57] ([fdo#104108] / [fdo#106978]) -> [PASS][58]
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-skl9/igt@[email protected]
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-skl1/igt@[email protected]
* igt@kms_plane_cursor@pipe-a-primary-size-128:
- shard-kbl: [DMESG-WARN][59] ([fdo#103558] / [fdo#105602]) -> [PASS][60] +37 similar issues
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-kbl6/igt@[email protected]
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-kbl4/igt@[email protected]
* igt@kms_psr@psr2_sprite_mmap_gtt:
- shard-iclb: [SKIP][61] ([fdo#109441]) -> [PASS][62] +3 similar issues
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb1/igt@kms_psr@psr2_sprite_mmap_gtt.html
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb2/igt@kms_psr@psr2_sprite_mmap_gtt.html
* igt@kms_setmode@basic:
- shard-apl: [FAIL][63] ([fdo#99912]) -> [PASS][64]
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-apl3/igt@[email protected]
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-apl6/igt@[email protected]
- shard-hsw: [FAIL][65] ([fdo#99912]) -> [PASS][66]
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-hsw6/igt@[email protected]
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-hsw6/igt@[email protected]
* igt@kms_vblank@pipe-a-ts-continuation-suspend:
- shard-apl: [INCOMPLETE][67] ([fdo#103927]) -> [PASS][68] +2 similar issues
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-apl4/igt@[email protected]
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-apl8/igt@[email protected]
* igt@perf@blocking:
- shard-skl: [FAIL][69] ([fdo#110728]) -> [PASS][70] +1 similar issue
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-skl7/igt@[email protected]
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-skl3/igt@[email protected]
#### Warnings ####
* igt@gem_ctx_isolation@vcs1-nonpriv:
- shard-iclb: [FAIL][71] ([fdo#111329]) -> [SKIP][72] ([fdo#109276])
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb4/igt@[email protected]
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb8/igt@[email protected]
* igt@gem_mocs_settings@mocs-isolation-bsd2:
- shard-iclb: [FAIL][73] ([fdo#111330]) -> [SKIP][74] ([fdo#109276]) +1 similar issue
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb4/igt@[email protected]
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb5/igt@[email protected]
* igt@kms_busy@extended-pageflip-modeset-hang-oldfb-render-d:
- shard-kbl: [SKIP][75] ([fdo#105602] / [fdo#109271] / [fdo#109278]) -> [SKIP][76] ([fdo#109271] / [fdo#109278]) +3 similar issues
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-kbl6/igt@[email protected]
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-kbl4/igt@[email protected]
* igt@kms_flip@flip-vs-suspend-interruptible:
- shard-apl: [DMESG-WARN][77] ([fdo#108566]) -> [INCOMPLETE][78] ([fdo#103927])
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-apl3/igt@[email protected]
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-apl2/igt@[email protected]
* igt@kms_panel_fitting@legacy:
- shard-kbl: [SKIP][79] ([fdo#105602] / [fdo#109271]) -> [SKIP][80] ([fdo#109271]) +30 similar issues
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-kbl6/igt@[email protected]
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-kbl4/igt@[email protected]
[fdo#102365]: https://bugs.freedesktop.org/show_bug.cgi?id=102365
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103540]: https://bugs.freedesktop.org/show_bug.cgi?id=103540
[fdo#103558]: https://bugs.freedesktop.org/show_bug.cgi?id=103558
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#104108]: https://bugs.freedesktop.org/show_bug.cgi?id=104108
[fdo#105602]: https://bugs.freedesktop.org/show_bug.cgi?id=105602
[fdo#105767]: https://bugs.freedesktop.org/show_bug.cgi?id=105767
[fdo#106978]: https://bugs.freedesktop.org/show_bug.cgi?id=106978
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#107724]: https://bugs.freedesktop.org/show_bug.cgi?id=107724
[fdo#108336]: https://bugs.freedesktop.org/show_bug.cgi?id=108336
[fdo#108566]: https://bugs.freedesktop.org/show_bug.cgi?id=108566
[fdo#108686]: https://bugs.freedesktop.org/show_bug.cgi?id=108686
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#110728]: https://bugs.freedesktop.org/show_bug.cgi?id=110728
[fdo#110741]: https://bugs.freedesktop.org/show_bug.cgi?id=110741
[fdo#110841]: https://bugs.freedesktop.org/show_bug.cgi?id=110841
[fdo#111325]: https://bugs.freedesktop.org/show_bug.cgi?id=111325
[fdo#111329]: https://bugs.freedesktop.org/show_bug.cgi?id=111329
[fdo#111330]: https://bugs.freedesktop.org/show_bug.cgi?id=111330
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
Participating hosts (9 -> 9)
------------------------------
No changes in participating hosts
Build changes
-------------
* CI: CI-20190529 -> None
* Linux: CI_DRM_6928 -> Patchwork_14476
CI-20190529: 20190529
CI_DRM_6928: 74bb5b031ca11c7036f7be21f42a73a057fc8da8 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5194: 531d3d02d5e7a2a84d61b92b28fa01b822afc399 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_14476: 4fc8d6917d9641566f066833c6cd4a367858864a @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Maarten Lankhorst
maintainerRe: ✗ Fi.CI.IGT: failure for series starting with [01/23] drm/i915/dp: Fix dsc bpp calculations, v2.
Op 21-09-2019 om 17:22 schreef Patchwork:
Quoted 64 lines
== Series Details ==
Series: series starting with [01/23] drm/i915/dp: Fix dsc bpp calculations, v2.
URL : https://patchwork.freedesktop.org/series/66998/
State : failure== Summary ==
CI Bug Log - changes from
CI_DRM_6928_full->Patchwork_14476_full
====================================================Summary
-------**FAILURE**
Serious unknown changes coming with
Patchwork_14476_fullabsolutely need to be verified manually.If you think the reported changes have nothing to do with the changes introduced in
Patchwork_14476_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.Possible new issues
-------------------Here are the unknown changes that may have been introduced in
Patchwork_14476_full:### IGT changes ###
#### Possible regressions ####
* igt@kms_plane_lowres@pipe-a-tiling-x:
- shard-snb: [PASS][1] -> [FAIL][2] +3 similar issues
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-snb6/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-snb2/igt@[email protected]* igt@kms_plane_lowres@pipe-a-tiling-yf:
- shard-skl: [PASS][3] -> [FAIL][4] +11 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-skl7/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-skl8/igt@[email protected]* igt@kms_plane_lowres@pipe-b-tiling-x:
- shard-glk: [PASS][5] -> [FAIL][6] +11 similar issues
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-glk2/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-glk2/igt@[email protected]
- shard-apl: [PASS][7] -> [FAIL][8] +8 similar issues
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-apl4/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-apl4/igt@[email protected]* igt@kms_plane_lowres@pipe-b-tiling-y:
- shard-iclb: NOTRUN -> [FAIL][9]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb5/igt@[email protected]* igt@kms_plane_lowres@pipe-c-tiling-none:
- shard-iclb: [PASS][10] -> [FAIL][11] +10 similar issues
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb4/igt@[email protected]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb5/igt@[email protected]
- shard-hsw: [PASS][12] -> [FAIL][13] +5 similar issues
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-hsw5/igt@[email protected]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-hsw4/igt@[email protected]
Quoted 8 lines
* igt@kms_plane_lowres@pipe-c-tiling-y:
- shard-apl: NOTRUN -> [FAIL][14]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-apl6/igt@[email protected]* igt@kms_plane_lowres@pipe-c-tiling-yf:
- shard-kbl: [PASS][15] -> [FAIL][16] +11 similar issues
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-kbl1/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-kbl3/igt@[email protected]
kms_plane_lowres is failing because of the debugfs changes to i915_display_info, rest of tests pass. Needs some fixes to igt. :)
Quoted 220 lines
Known issues
------------Here are the changes found in
Patchwork_14476_fullthat come from known issues:### IGT changes ###
#### Issues hit ####
* igt@gem_ctx_shared@exec-single-timeline-bsd:
- shard-iclb: [PASS][17] -> [SKIP][18] ([fdo#110841])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb6/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb1/igt@[email protected]* igt@gem_exec_schedule@preempt-queue-bsd1:
- shard-iclb: [PASS][19] -> [SKIP][20] ([fdo#109276]) +37 similar issues
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb4/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb5/igt@[email protected]* igt@gem_exec_schedule@reorder-wide-bsd:
- shard-iclb: [PASS][21] -> [SKIP][22] ([fdo#111325]) +6 similar issues
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb3/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb2/igt@[email protected]* igt@kms_cursor_crc@pipe-b-cursor-64x21-offscreen:
- shard-apl: [PASS][23] -> [INCOMPLETE][24] ([fdo#103927]) +3 similar issues
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-apl1/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-apl6/igt@[email protected]* igt@kms_cursor_legacy@2x-long-cursor-vs-flip-legacy:
- shard-hsw: [PASS][25] -> [FAIL][26] ([fdo#105767])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-hsw5/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-hsw4/igt@[email protected]* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-shrfb-plflip-blt:
- shard-iclb: [PASS][27] -> [FAIL][28] ([fdo#103167]) +4 similar issues
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb4/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb5/igt@[email protected]* igt@kms_plane@pixel-format-pipe-a-planes:
- shard-iclb: [PASS][29] -> [DMESG-FAIL][30] ([fdo#107724]) +5 similar issues
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb3/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb2/igt@[email protected]* igt@kms_plane_scaling@pipe-b-scaler-with-rotation:
- shard-iclb: [PASS][31] -> [DMESG-WARN][32] ([fdo#107724]) +7 similar issues
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb6/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb3/igt@[email protected]* igt@kms_psr@psr2_sprite_plane_move:
- shard-iclb: [PASS][33] -> [SKIP][34] ([fdo#109441]) +4 similar issues
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb2/igt@kms_psr@psr2_sprite_plane_move.html
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb3/igt@kms_psr@psr2_sprite_plane_move.html* igt@kms_rotation_crc@bad-pixel-format:
- shard-iclb: [PASS][35] -> [DMESG-WARN][36] ([fdo#107724] / [fdo#108336])
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb4/igt@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb5/igt@[email protected]* igt@kms_vblank@pipe-b-ts-continuation-suspend:
- shard-apl: [PASS][37] -> [DMESG-WARN][38] ([fdo#108566]) +3 similar issues
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-apl8/igt@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-apl3/igt@[email protected]* igt@kms_vblank@pipe-c-query-forked-hang:
- shard-hsw: [PASS][39] -> [INCOMPLETE][40] ([fdo#103540])
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-hsw5/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-hsw6/igt@[email protected]#### Possible fixes ####
* igt@gem_exec_schedule@independent-bsd2:
- shard-iclb: [SKIP][41] ([fdo#109276]) -> [PASS][42] +14 similar issues
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb3/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb2/igt@[email protected]* igt@gem_exec_schedule@preemptive-hang-bsd:
- shard-iclb: [SKIP][43] ([fdo#111325]) -> [PASS][44] +7 similar issues
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb1/igt@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb5/igt@[email protected]* igt@gem_tiled_swapping@non-threaded:
- shard-glk: [DMESG-WARN][45] ([fdo#108686]) -> [PASS][46]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-glk4/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-glk4/igt@[email protected]* igt@i915_suspend@sysfs-reader:
- shard-apl: [DMESG-WARN][47] ([fdo#108566]) -> [PASS][48] +4 similar issues
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-apl1/igt@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-apl2/igt@[email protected]* igt@kms_cursor_crc@pipe-c-cursor-suspend:
- shard-skl: [INCOMPLETE][49] ([fdo#110741]) -> [PASS][50]
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-skl6/igt@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-skl7/igt@[email protected]* igt@kms_flip@flip-vs-dpms-interruptible:
- shard-iclb: [INCOMPLETE][51] ([fdo#107713]) -> [PASS][52]
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb1/igt@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb5/igt@[email protected]* igt@kms_flip@flip-vs-suspend-interruptible:
- shard-snb: [DMESG-WARN][53] ([fdo#102365]) -> [PASS][54]
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-snb4/igt@[email protected]
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-snb2/igt@[email protected]* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-indfb-draw-pwrite:
- shard-iclb: [FAIL][55] ([fdo#103167]) -> [PASS][56] +2 similar issues
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb1/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-indfb-draw-pwrite.html
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb6/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-indfb-draw-pwrite.html* igt@kms_frontbuffer_tracking@psr-suspend:
- shard-skl: [INCOMPLETE][57] ([fdo#104108] / [fdo#106978]) -> [PASS][58]
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-skl9/igt@[email protected]
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-skl1/igt@[email protected]* igt@kms_plane_cursor@pipe-a-primary-size-128:
- shard-kbl: [DMESG-WARN][59] ([fdo#103558] / [fdo#105602]) -> [PASS][60] +37 similar issues
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-kbl6/igt@[email protected]
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-kbl4/igt@[email protected]* igt@kms_psr@psr2_sprite_mmap_gtt:
- shard-iclb: [SKIP][61] ([fdo#109441]) -> [PASS][62] +3 similar issues
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb1/igt@kms_psr@psr2_sprite_mmap_gtt.html
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb2/igt@kms_psr@psr2_sprite_mmap_gtt.html* igt@kms_setmode@basic:
- shard-apl: [FAIL][63] ([fdo#99912]) -> [PASS][64]
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-apl3/igt@[email protected]
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-apl6/igt@[email protected]
- shard-hsw: [FAIL][65] ([fdo#99912]) -> [PASS][66]
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-hsw6/igt@[email protected]
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-hsw6/igt@[email protected]* igt@kms_vblank@pipe-a-ts-continuation-suspend:
- shard-apl: [INCOMPLETE][67] ([fdo#103927]) -> [PASS][68] +2 similar issues
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-apl4/igt@[email protected]
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-apl8/igt@[email protected]* igt@perf@blocking:
- shard-skl: [FAIL][69] ([fdo#110728]) -> [PASS][70] +1 similar issue
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-skl7/igt@[email protected]
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-skl3/igt@[email protected]#### Warnings ####
* igt@gem_ctx_isolation@vcs1-nonpriv:
- shard-iclb: [FAIL][71] ([fdo#111329]) -> [SKIP][72] ([fdo#109276])
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb4/igt@[email protected]
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb8/igt@[email protected]* igt@gem_mocs_settings@mocs-isolation-bsd2:
- shard-iclb: [FAIL][73] ([fdo#111330]) -> [SKIP][74] ([fdo#109276]) +1 similar issue
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-iclb4/igt@[email protected]
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-iclb5/igt@[email protected]* igt@kms_busy@extended-pageflip-modeset-hang-oldfb-render-d:
- shard-kbl: [SKIP][75] ([fdo#105602] / [fdo#109271] / [fdo#109278]) -> [SKIP][76] ([fdo#109271] / [fdo#109278]) +3 similar issues
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-kbl6/igt@[email protected]
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-kbl4/igt@[email protected]* igt@kms_flip@flip-vs-suspend-interruptible:
- shard-apl: [DMESG-WARN][77] ([fdo#108566]) -> [INCOMPLETE][78] ([fdo#103927])
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-apl3/igt@[email protected]
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-apl2/igt@[email protected]* igt@kms_panel_fitting@legacy:
- shard-kbl: [SKIP][79] ([fdo#105602] / [fdo#109271]) -> [SKIP][80] ([fdo#109271]) +30 similar issues
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6928/shard-kbl6/igt@[email protected]
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/shard-kbl4/igt@[email protected][fdo#102365]: https://bugs.freedesktop.org/show_bug.cgi?id=102365
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103540]: https://bugs.freedesktop.org/show_bug.cgi?id=103540
[fdo#103558]: https://bugs.freedesktop.org/show_bug.cgi?id=103558
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#104108]: https://bugs.freedesktop.org/show_bug.cgi?id=104108
[fdo#105602]: https://bugs.freedesktop.org/show_bug.cgi?id=105602
[fdo#105767]: https://bugs.freedesktop.org/show_bug.cgi?id=105767
[fdo#106978]: https://bugs.freedesktop.org/show_bug.cgi?id=106978
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#107724]: https://bugs.freedesktop.org/show_bug.cgi?id=107724
[fdo#108336]: https://bugs.freedesktop.org/show_bug.cgi?id=108336
[fdo#108566]: https://bugs.freedesktop.org/show_bug.cgi?id=108566
[fdo#108686]: https://bugs.freedesktop.org/show_bug.cgi?id=108686
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#110728]: https://bugs.freedesktop.org/show_bug.cgi?id=110728
[fdo#110741]: https://bugs.freedesktop.org/show_bug.cgi?id=110741
[fdo#110841]: https://bugs.freedesktop.org/show_bug.cgi?id=110841
[fdo#111325]: https://bugs.freedesktop.org/show_bug.cgi?id=111325
[fdo#111329]: https://bugs.freedesktop.org/show_bug.cgi?id=111329
[fdo#111330]: https://bugs.freedesktop.org/show_bug.cgi?id=111330
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912Participating hosts (9 -> 9)
------------------------------No changes in participating hosts
Build changes
-------------* CI: CI-20190529 -> None
* Linux:CI_DRM_6928->Patchwork_14476CI-20190529: 20190529
CI_DRM_6928:74bb5b031ca11c7036f7be21f42a73a057fc8da8@git://anongit.freedesktop.org/gfx-ci/linux
IGT_5194:531d3d02d5e7a2a84d61b92b28fa01b822afc399@git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_14476:4fc8d6917d9641566f066833c6cd4a367858864a@git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509:fdc5a4ca11124ab8413c7988896eec4c97336694@git://anongit.freedesktop.org/piglit
Quoted 3 lines
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14476/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BUILD: failure for series starting with drm/i915/dp: Fix dsc bpp calculations, v4. (rev3)
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: series starting with drm/i915/dp: Fix dsc bpp calculations, v4. (rev3)
URL : https://patchwork.freedesktop.org/series/66998/
State : failure
== Summary ==
Applying: drm/i915/dp: Fix dsc bpp calculations, v4.
Applying: HAX drm/i915: Disable FEC entirely for now
Applying: drm/i915: Prepare to split crtc state in uapi and hw state Using index info to reconstruct a base tree...
M drivers/gpu/drm/i915/display/intel_audio.c
M drivers/gpu/drm/i915/display/intel_color.c
M drivers/gpu/drm/i915/display/intel_ddi.c
M drivers/gpu/drm/i915/display/intel_display.c
M drivers/gpu/drm/i915/display/intel_display_types.h
M drivers/gpu/drm/i915/display/intel_dp.c
M drivers/gpu/drm/i915/display/intel_dp_mst.c
M drivers/gpu/drm/i915/display/intel_dpll_mgr.c
M drivers/gpu/drm/i915/display/intel_hdmi.c
M drivers/gpu/drm/i915/i915_debugfs.c
Falling back to patching base and 3-way merge...
Auto-merging drivers/gpu/drm/i915/i915_debugfs.c
Auto-merging drivers/gpu/drm/i915/display/intel_hdmi.c
Auto-merging drivers/gpu/drm/i915/display/intel_dpll_mgr.c Auto-merging drivers/gpu/drm/i915/display/intel_dp_mst.c
Auto-merging drivers/gpu/drm/i915/display/intel_dp.c
Auto-merging drivers/gpu/drm/i915/display/intel_display_types.h Auto-merging drivers/gpu/drm/i915/display/intel_display.c
CONFLICT (content): Merge conflict in drivers/gpu/drm/i915/display/intel_display.c Auto-merging drivers/gpu/drm/i915/display/intel_ddi.c
CONFLICT (content): Merge conflict in drivers/gpu/drm/i915/display/intel_ddi.c Auto-merging drivers/gpu/drm/i915/display/intel_color.c
CONFLICT (content): Merge conflict in drivers/gpu/drm/i915/display/intel_color.c Auto-merging drivers/gpu/drm/i915/display/intel_audio.c
error: Failed to merge in the changes.
hint: Use 'git am --show-current-patch' to see the failed patch
Patch failed at 0003 drm/i915: Prepare to split crtc state in uapi and hw state When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx