ARM: imx: Add QSPI boot mode for i.MX6UL/ULL
Subsystems (3)
PATCH 1/3 ARM: imx: Add QSPI boot mode for i.MX6UL/ULL
This patch adds the missing boot mode detection for QSPI boot on i.MX6UL/ULL. Without it, booting with SPL from QSPI NOR does not work.
Signed-off-by Stefan Roese <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Stefano Babic <[email protected]>
--- arch/arm/mach-imx/spl.c | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/mach-imx/spl.c +5 -0
@@ -94,6 +94,11 @@ u32 spl_boot_device(void)/* NAND Flash: 8.5.2, Table 8-10 */ case IMX6_BMODE_NAND_MIN ... IMX6_BMODE_NAND_MAX:return BOOT_DEVICE_NAND ; +#if defined(CONFIG_MX6UL ) || defined(CONFIG_MX6ULL ) +/* QSPI boot */ +case IMX6_BMODE_QSPI : +return BOOT_DEVICE_SPI ; +#endif }return BOOT_DEVICE_NONE ; }
Signature · 1 line
2.23.0
PATCH 2/3 ARM: imx: arch/arm/mach-imx/spl_qspi.cfg
Similar to "spl_sd.cfg", this patch introduces "spl_qspi.cfg" so that all i.MX6 based boards can use it, when they use SPL and QSPI boot mode.
Signed-off-by Stefan Roese <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Stefano Babic <[email protected]>
--- arch/arm/mach-imx/spl_qspi.cfg | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 arch/arm/mach-imx/spl_qspi.cfg
arch/arm/mach-imx/spl_qspi.cfg new file +17 -0
@@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/ + */ + +#define __ASSEMBLY__ +#include <config.h> + +IMAGE_VERSION 2 +BOOT_FROM qspi + +/* + * Secure boot support + */ +#ifdef CONFIG_SECURE_BOOT +CSF CONFIG_CSF_SIZE +#endif
Signature · 1 line
2.23.0
PATCH 3/3 Kconfig: Set default BUILD_TARGET for ARCH_MX6 with SPL
In reply to Stefan RoeseUse BUILD_TARGET to automatically build "u-boot-with-spl.imx" on MX6 targets with SPL.
Signed-off-by Stefan Roese <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Stefano Babic <[email protected]>
--- Kconfig | 1 + 1 file changed, 1 insertion(+)
Kconfig +1 -0
@@ -256,6 +256,7 @@ config BUILD_TARGET ARCH_SUNXI || RISCV) default "u-boot.kwb" if KIRKWOOD default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT + default "u-boot-with-spl.imx" if ARCH_MX6 && SPL help Some SoCs need special image types (e.g. U-Boot binary with a special header) as build targets. By defining
Signature · 1 line
2.23.0