ARM: dts: imx6qdl-wandboard: add ethernet PHY description
Subsystems (2)
PATCH 1/1 ARM: dts: imx6qdl-wandboard: add ethernet PHY description
Wandboard devicetrees lack the ethernet PHY description, add it.
Signed-off-by Anatolij Gustschin <[email protected]>
--- arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)
arch/arm/boot/dts/imx6qdl-wandboard.dtsi +10 -0
@@ -279,8 +279,18 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; + phy-handle = <ðphy>; phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@1 { + reg = <1>; + }; + }; }; &mipi_csi {
Signature · 7 lines
2.21.0 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Shawn Guo
AppliedQuoted 3 lines · Anatolij Gustschin
Wandboard devicetrees lack the ethernet PHY description, add it.
Signed-off-by Anatolij Gustschin <[email protected]>
Applied, thanks.
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel