Skip to contentSkip to conversation

k10temp: update docs and add temp2_input info

PATCH RESEND Applied Lukas Zapletal 2 participants 2 messages Sep 23, 2019 – Oct 2, 2019

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH RESEND 1/1 k10temp: update docs and add temp2_input info

It's been a while since the k10temp documentation has been updated. There are new CPU families supported as well as Tdie temp was added. This patch adds all missing families which I was able to find from git history and provides more info about Tctl vs Tdie exported temps.

---
 Documentation/hwmon/k10temp.rst | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)
Documentation/hwmon/k10temp.rst +16 -1
index 12a86ba17de9..fc9d2a5ad57d 100644
@@ -21,10 +21,16 @@ Supported chips:
 
 * AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)
 
-* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri", "Carrizo"
+* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri", "Carrizo", "Stoney Ridge", "Bristol Ridge"
 
 * AMD Family 16h processors: "Kabini", "Mullins"
 
+* AMD Family 17h processors: "Zen", "Zen 2"
+
+* AMD Family 18h processors: "Hygon Dhyana"
+
+* AMD Family 19h processors: "Zen 3"
+
   Prefix: 'k10temp'
 
   Addresses scanned: PCI space
@@ -110,3 +116,12 @@ The maximum value for Tctl is available in the file temp1_max.
 If the BIOS has enabled hardware temperature control, the threshold at
 which the processor will throttle itself to avoid damage is available in
 temp1_crit and temp1_crit_hyst.
+
+On some AMD CPUs, there is a difference between the die temperature (Tdie) and
+the reported temperature (Tctl). Tdie is the real measured temperature, and
+Tctl is used for fan control. While Tctl is always available as temp1_input,
+the driver exports Tdie temperature as temp2_input for those CPUs which support
+it.
+
+Models from 17h family report relative temperature, the driver aims to
+compensate and report the real temperature.
Signature · 1 line
2.21.0
maintainer Applied
#1 lore raw
Quoted 6 lines · Lukas Zapletal

It's been a while since the k10temp documentation has been updated. There are new CPU families supported as well as Tdie temp was added. This patch adds all missing families which I was able to find from git history and provides more info about Tctl vs Tdie exported temps.

Applied.

Thanks,
Guenter

Quoted 39 lines
---
 Documentation/hwmon/k10temp.rst | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)
Documentation/hwmon/k10temp.rst +16 -1
index 12a86ba17de9..fc9d2a5ad57d 100644
@@ -21,10 +21,16 @@ Supported chips:
 
 * AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)
 
-* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri", "Carrizo"
+* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri", "Carrizo", "Stoney Ridge", "Bristol Ridge"
 
 * AMD Family 16h processors: "Kabini", "Mullins"
 
+* AMD Family 17h processors: "Zen", "Zen 2"
+
+* AMD Family 18h processors: "Hygon Dhyana"
+
+* AMD Family 19h processors: "Zen 3"
+
   Prefix: 'k10temp'
 
   Addresses scanned: PCI space
@@ -110,3 +116,12 @@ The maximum value for Tctl is available in the file temp1_max.
 If the BIOS has enabled hardware temperature control, the threshold at
 which the processor will throttle itself to avoid damage is available in
 temp1_crit and temp1_crit_hyst.
+
+On some AMD CPUs, there is a difference between the die temperature (Tdie) and
+the reported temperature (Tctl). Tdie is the real measured temperature, and
+Tctl is used for fan control. While Tctl is always available as temp1_input,
+the driver exports Tdie temperature as temp2_input for those CPUs which support
+it.
+
+Models from 17h family report relative temperature, the driver aims to
+compensate and report the real temperature.