Skip to contentSkip to conversation

net: davinci_cpdma: use dma_addr_t for DMA address

PATCH New Nobuhiro Iwamatsu 2 participants 3 messages Sep 18, 2019 – Sep 23, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 net: davinci_cpdma: use dma_addr_t for DMA address

From: Arnd Bergmann <[email protected]>

commit 84092996673211f16ef3b942a191d7952e9dfea9 upstream.

The davinci_cpdma mixes up physical addresses as seen from the CPU and DMA addresses as seen from a DMA master, since it can operate on both normal memory or an on-chip buffer. If dma_addr_t is different from phys_addr_t, this means we get a compile-time warning about the type mismatch:

ethernet/ti/davinci_cpdma.c: In function 'cpdma_desc_pool_create':
ethernet/ti/davinci_cpdma.c:182:48: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]
pool->cpumap = dma_alloc_coherent(dev, size, &pool->phys,
In file included from ethernet/ti/davinci_cpdma.c:21:0:
dma-mapping.h:398:21: note: expected 'dma_addr_t * {aka long long unsigned int *}' but argument is of type 'phys_addr_t * {aka unsigned int *}'
static inline void *dma_alloc_coherent(struct device *dev, size_t size,

This slightly restructures the code so the address we use for mapping RAM into a DMA address is always a dma_addr_t, avoiding the warning. The code is correct even if both types are 32-bit because the DMA master in this device only supports 32-bit addressing anyway, independent of the types that are used.

We still assign this value to pool->phys, and that is wrong if the driver is ever used with an IOMMU, but that value appears to be never used, so there is no problem really. I've added a couple of comments about where we do things that are slightly violating the API.

---
 drivers/net/ethernet/ti/davinci_cpdma.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/net/ethernet/ti/davinci_cpdma.c +6 -6
index 657b65bf5cac..18bf3a8fdc50 100644
@@ -82,7 +82,7 @@ struct cpdma_desc {
 
 struct cpdma_desc_pool {
 	phys_addr_t		phys;
-	u32			hw_addr;
+	dma_addr_t		hw_addr;
 	void __iomem		*iomap;		/* ioremap map */
 	void			*cpumap;	/* dma_alloc map */
 	int			desc_size, mem_size;
@@ -152,7 +152,7 @@ struct cpdma_chan {
  * abstract out these details
  */
 static struct cpdma_desc_pool *
-cpdma_desc_pool_create(struct device *dev, u32 phys, u32 hw_addr,
+cpdma_desc_pool_create(struct device *dev, u32 phys, dma_addr_t hw_addr,
 				int size, int align)
 {
 	int bitmap_size;
@@ -176,13 +176,13 @@ cpdma_desc_pool_create(struct device *dev, u32 phys, u32 hw_addr,
 
 	if (phys) {
 		pool->phys  = phys;
-		pool->iomap = ioremap(phys, size);
+		pool->iomap = ioremap(phys, size); /* should be memremap? */
 		pool->hw_addr = hw_addr;
 	} else {
-		pool->cpumap = dma_alloc_coherent(dev, size, &pool->phys,
+		pool->cpumap = dma_alloc_coherent(dev, size, &pool->hw_addr,
 						  GFP_KERNEL);
-		pool->iomap = pool->cpumap;
-		pool->hw_addr = pool->phys;
+		pool->iomap = (void __iomem __force *)pool->cpumap;
+		pool->phys = pool->hw_addr; /* assumes no IOMMU, don't use this value */
 	}
 
 	if (pool->iomap)
Signature · 1 line
2.23.0
#1 lore raw

PATCH 1/1 net: davinci_cpdma: use dma_addr_t for DMA address

Hi,

This patch is needed to fix following build error on linux-4.4.y-cip-rt:
https://gitlab.com/cip-project/cip-kernel/linux-cip/-/jobs/297855132

This problem does not occur with 4.4.y-cip.
The following fixes have been added in RT and this will affect:
https://git.kernel.org/pub/scm/linux/kernel/git/cip/linux-cip.git/tree/Makefile?h=linux-4.4.y-cip-rt#n826

Best regards,
Nobuhiro

Quoted 103 lines

-----Original Message-----
From: cip-dev-bounces at lists.cip-project.org [mailto:cip-dev-bounces at lists.cip-project.org] On Behalf Of Nobuhiro Iwamatsu
Sent: Wednesday, September 18, 2019 5:01 PM
To: cip-dev at lists.cip-project.org
Subject: [cip-dev] [PATCH] net: davinci_cpdma: use dma_addr_t for DMA address

From: Arnd Bergmann <[email protected]>

commit 84092996673211f16ef3b942a191d7952e9dfea9 upstream.

The davinci_cpdma mixes up physical addresses as seen from the CPU and DMA addresses as seen from a DMA master, since it can operate on both normal memory or an on-chip buffer. If dma_addr_t is different from phys_addr_t, this means we get a compile-time warning about the type mismatch:

ethernet/ti/davinci_cpdma.c: In function 'cpdma_desc_pool_create':
ethernet/ti/davinci_cpdma.c:182:48: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]
pool->cpumap = dma_alloc_coherent(dev, size, &pool->phys, In file
included from ethernet/ti/davinci_cpdma.c:21:0:
dma-mapping.h:398:21: note: expected 'dma_addr_t * {aka long long unsigned int *}' but argument is of type 'phys_addr_t * {aka unsigned int *}'
static inline void *dma_alloc_coherent(struct device *dev, size_t size,

This slightly restructures the code so the address we use for mapping RAM into a DMA address is always a dma_addr_t, avoiding the warning. The code is correct even if both types are 32-bit because the DMA master in this device only supports 32-bit addressing anyway, independent of the types that are used.

We still assign this value to pool->phys, and that is wrong if the driver is ever used with an IOMMU, but that value appears to be never used, so there is no problem really. I've added a couple of comments about where we do things that are slightly violating the API.

---
 drivers/net/ethernet/ti/davinci_cpdma.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/net/ethernet/ti/davinci_cpdma.c +4 -3
index 657b65bf5cac..18bf3a8fdc50 100644
@@ -82,7 +82,7 @@ struct cpdma_desc {
 
 struct cpdma_desc_pool {
 	phys_addr_t		phys;
-	u32			hw_addr;
+	dma_addr_t		hw_addr;
 	void __iomem		*iomap;		/* ioremap map */
 	void			*cpumap;	/* dma_alloc map */
 	int			desc_size, mem_size;
@@ -152,7 +152,7 @@ struct cpdma_chan {
  * abstract out these details
  */
 static struct cpdma_desc_pool *
-cpdma_desc_pool_create(struct device *dev, u32 phys, u32 hw_addr,
+cpdma_desc_pool_create(struct device *dev, u32 phys, dma_addr_t
+hw_addr,
 				int size, int align)
 {
 	int bitmap_size;
@@ -176,13 +176,13 @@ cpdma_desc_pool_create(struct device *dev, u32 phys,
 u32 hw_addr,
 
 	if (phys) {
 		pool->phys  = phys;
-		pool->iomap = ioremap(phys, size);
+		pool->iomap = ioremap(phys, size); /* should be

memremap? */

drivers/net/ethernet/ti/davinci_cpdma.c +0 -1
 		pool->hw_addr = hw_addr;
 	} else {
-		pool->cpumap = dma_alloc_coherent(dev, size,

&pool->phys,

drivers/net/ethernet/ti/davinci_cpdma.c +1 -0
+		pool->cpumap = dma_alloc_coherent(dev, size,

&pool->hw_addr,

drivers/net/ethernet/ti/davinci_cpdma.c +2 -2
 						  GFP_KERNEL);
-		pool->iomap = pool->cpumap;
-		pool->hw_addr = pool->phys;
+		pool->iomap = (void __iomem __force *)pool->cpumap;
+		pool->phys = pool->hw_addr; /* assumes no IOMMU, don't

use this value

drivers/net/ethernet/ti/davinci_cpdma.c +1 -1
+*/
 	}
 
 	if (pool->iomap)
--

2.23.0

_______________________________________________
cip-dev mailing list
cip-dev at lists.cip-project.org
https://lists.cip-project.org/mailman/listinfo/cip-dev

#2 lore raw

PATCH 1/1 net: davinci_cpdma: use dma_addr_t for DMA address

In reply to Nobuhiro Iwamatsu

Hi!

That indeed seems to fix the failure. Tree now
compiles, so I pushed the result.

Thanks for the patch!

Best regards,
Pavel

Quoted 76 lines

From: Arnd Bergmann <[email protected]>

commit 84092996673211f16ef3b942a191d7952e9dfea9 upstream.

The davinci_cpdma mixes up physical addresses as seen from the CPU and DMA addresses as seen from a DMA master, since it can operate on both normal memory or an on-chip buffer. If dma_addr_t is different from phys_addr_t, this means we get a compile-time warning about the type mismatch:

ethernet/ti/davinci_cpdma.c: In function 'cpdma_desc_pool_create':
ethernet/ti/davinci_cpdma.c:182:48: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]
pool->cpumap = dma_alloc_coherent(dev, size, &pool->phys,
In file included from ethernet/ti/davinci_cpdma.c:21:0:
dma-mapping.h:398:21: note: expected 'dma_addr_t * {aka long long unsigned int *}' but argument is of type 'phys_addr_t * {aka unsigned int *}'
static inline void *dma_alloc_coherent(struct device *dev, size_t size,

This slightly restructures the code so the address we use for mapping RAM into a DMA address is always a dma_addr_t, avoiding the warning. The code is correct even if both types are 32-bit because the DMA master in this device only supports 32-bit addressing anyway, independent of the types that are used.

We still assign this value to pool->phys, and that is wrong if the driver is ever used with an IOMMU, but that value appears to be never used, so there is no problem really. I've added a couple of comments about where we do things that are slightly violating the API.

---
 drivers/net/ethernet/ti/davinci_cpdma.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/net/ethernet/ti/davinci_cpdma.c +6 -6
index 657b65bf5cac..18bf3a8fdc50 100644
@@ -82,7 +82,7 @@ struct cpdma_desc {
 
 struct cpdma_desc_pool {
 	phys_addr_t		phys;
-	u32			hw_addr;
+	dma_addr_t		hw_addr;
 	void __iomem		*iomap;		/* ioremap map */
 	void			*cpumap;	/* dma_alloc map */
 	int			desc_size, mem_size;
@@ -152,7 +152,7 @@ struct cpdma_chan {
  * abstract out these details
  */
 static struct cpdma_desc_pool *
-cpdma_desc_pool_create(struct device *dev, u32 phys, u32 hw_addr,
+cpdma_desc_pool_create(struct device *dev, u32 phys, dma_addr_t hw_addr,
 				int size, int align)
 {
 	int bitmap_size;
@@ -176,13 +176,13 @@ cpdma_desc_pool_create(struct device *dev, u32 phys, u32 hw_addr,
 
 	if (phys) {
 		pool->phys  = phys;
-		pool->iomap = ioremap(phys, size);
+		pool->iomap = ioremap(phys, size); /* should be memremap? */
 		pool->hw_addr = hw_addr;
 	} else {
-		pool->cpumap = dma_alloc_coherent(dev, size, &pool->phys,
+		pool->cpumap = dma_alloc_coherent(dev, size, &pool->hw_addr,
 						  GFP_KERNEL);
-		pool->iomap = pool->cpumap;
-		pool->hw_addr = pool->phys;
+		pool->iomap = (void __iomem __force *)pool->cpumap;
+		pool->phys = pool->hw_addr; /* assumes no IOMMU, don't use this value */
 	}
 
 	if (pool->iomap)
Signature · 9 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.cip-project.org/pipermail/cip-dev/attachments/20190923/20352c0c/attachment.sig>