crypto: sun4i-ss: Enable power management
Subsystems (2)
v3 cover crypto: sun4i-ss: Enable power management
Hello
This serie enables power management in the sun4i-ss driver.
Regards
Changes since v2 ( https://lore.kernel.org/linux-arm-kernel/[email protected]/T/ ):
- depends on PM
- fusioned suspend/resume functions with sun4i_ssenable/disable
- fixed style problem
Changes since v1:
- Fixed style in patch #1
- Check more return code of PM functions
- Add PM support in hash/prng
- reworked the probe order of PM functions and the PM strategy
Corentin Labbe (2):
crypto: sun4i-ss: simplify enable/disable of the device
crypto: sun4i-ss: enable pm_runtime
drivers/crypto/Kconfig | 1 + drivers/crypto/sunxi-ss/sun4i-ss-cipher.c | 10 ++ drivers/crypto/sunxi-ss/sun4i-ss-core.c | 139 ++++++++++++++++------ drivers/crypto/sunxi-ss/sun4i-ss-hash.c | 12 ++ drivers/crypto/sunxi-ss/sun4i-ss-prng.c | 9 +- drivers/crypto/sunxi-ss/sun4i-ss.h | 2 + 6 files changed, 133 insertions(+), 40 deletions(-)
Signature · 1 line
2.21.0
PATCH v3 1/2 crypto: sun4i-ss: simplify enable/disable of the device
This patch regroups resource enabling/disabling in dedicated function. This simplify error handling and will permit to support power management.
--- drivers/crypto/sunxi-ss/sun4i-ss-core.c | 77 +++++++++++++++---------- 1 file changed, 46 insertions(+), 31 deletions(-)
drivers/crypto/sunxi-ss/sun4i-ss-core.c +46 -31
@@ -223,6 +223,45 @@ static struct sun4i_ss_alg_template ss_algs[] = {#endif }; +static void sun4i_ss_disable (struct sun4i_ss_ctx *ss) +{ +if (ss->reset) +reset_control_assert (ss->reset); + +clk_disable_unprepare (ss->ssclk); +clk_disable_unprepare (ss->busclk); +} + +static int sun4i_ss_enable (struct sun4i_ss_ctx *ss) +{ +int err; + + err =clk_prepare_enable (ss->busclk); +if (err) { +dev_err (ss->dev,"Cannot prepare_enable busclk\n" ); + goto err_enable; + } + + err =clk_prepare_enable (ss->ssclk); +if (err) { +dev_err (ss->dev,"Cannot prepare_enable ssclk\n" ); + goto err_enable; + } + +if (ss->reset) { + err =reset_control_deassert (ss->reset); +if (err) { +dev_err (ss->dev,"Cannot deassert reset control\n" ); + goto err_enable; + } + } + +return err; +err_enable: +sun4i_ss_disable (ss); +return err; +} +static int sun4i_ss_probe (struct platform_device *pdev) {u32 v;
@@ -269,17 +308,9 @@ static int sun4i_ss_probe(struct platform_device *pdev) ss->reset =NULL ; } -/* Enable both clocks */ - err =clk_prepare_enable (ss->busclk); -if (err) { -dev_err (&pdev->dev,"Cannot prepare_enable busclk\n" ); -return err; - } - err =clk_prepare_enable (ss->ssclk); -if (err) { -dev_err (&pdev->dev,"Cannot prepare_enable ssclk\n" ); - goto error_ssclk; - } + err =sun4i_ss_enable (ss); +if (err) + goto error_enable;/* * Check that clock have the correct rates given in the datasheet
@@ -288,16 +319,7 @@ static int sun4i_ss_probe(struct platform_device *pdev) err =clk_set_rate (ss->ssclk, cr_mod);if (err) {dev_err (&pdev->dev,"Cannot set clock rate to ssclk\n" ); - goto error_clk; - } - -/* Deassert reset if we have a reset control */ -if (ss->reset) { - err =reset_control_deassert (ss->reset); -if (err) { -dev_err (&pdev->dev,"Cannot deassert reset control\n" ); - goto error_clk; - } + goto error_enable; }/*
@@ -387,12 +409,8 @@ static int sun4i_ss_probe(struct platform_device *pdev)break ; } } -if (ss->reset) -reset_control_assert (ss->reset); -error_clk: -clk_disable_unprepare (ss->ssclk); -error_ssclk: -clk_disable_unprepare (ss->busclk); +error_enable: +sun4i_ss_disable (ss);return err; }
@@ -416,10 +434,7 @@ static int sun4i_ss_remove(struct platform_device *pdev) }writel (0 , ss->base +SS_CTL ); -if (ss->reset) -reset_control_assert (ss->reset); -clk_disable_unprepare (ss->busclk); -clk_disable_unprepare (ss->ssclk); +sun4i_ss_disable (ss);return 0 ; }
Signature · 1 line
2.21.0
PATCH v3 2/2 crypto: sun4i-ss: enable pm_runtime
In reply to Corentin LabbeThis patch enables power management on the Security System. sun4i-ss now depends on PM because it simplify code and prevent some ifdef. But this is not a problem since arch maintainer want ARCH_SUNXI to depend on PM in the future.
--- drivers/crypto/Kconfig | 1 + drivers/crypto/sunxi-ss/sun4i-ss-cipher.c | 10 +++ drivers/crypto/sunxi-ss/sun4i-ss-core.c | 82 ++++++++++++++++++----- drivers/crypto/sunxi-ss/sun4i-ss-hash.c | 12 ++++ drivers/crypto/sunxi-ss/sun4i-ss-prng.c | 9 ++- drivers/crypto/sunxi-ss/sun4i-ss.h | 2 + 6 files changed, 97 insertions(+), 19 deletions(-)
drivers/crypto/Kconfig +1 -0
@@ -662,6 +662,7 @@ config CRYPTO_DEV_IMGTEC_HASH config CRYPTO_DEV_SUN4I_SS tristate "Support for Allwinner Security System cryptographic accelerator" depends on ARCH_SUNXI && !64BIT + depends on PM select CRYPTO_MD5 select CRYPTO_SHA1 select CRYPTO_AES
drivers/crypto/sunxi-ss/sun4i-ss-cipher.c +10 -0
@@ -480,6 +480,7 @@ int sun4i_ss_cipher_init(struct crypto_tfm *tfm)struct sun4i_tfm_ctx *op =crypto_tfm_ctx (tfm);struct sun4i_ss_alg_template *algt;const char *name =crypto_tfm_alg_name (tfm); +int err;memset (op,0 ,sizeof (struct sun4i_tfm_ctx ));
@@ -497,13 +498,22 @@ int sun4i_ss_cipher_init(struct crypto_tfm *tfm)return PTR_ERR (op->fallback_tfm); } + err =pm_runtime_get_sync (op->ss->dev); +if (err <0 ) + goto error_pm; +return 0 ; +error_pm: +crypto_free_sync_skcipher (op->fallback_tfm); +return err; }void sun4i_ss_cipher_exit (struct crypto_tfm *tfm) {struct sun4i_tfm_ctx *op =crypto_tfm_ctx (tfm); +crypto_free_sync_skcipher (op->fallback_tfm); +pm_runtime_put (op->ss->dev); }/* check and set the AES key, prepare the mode to be used */
drivers/crypto/sunxi-ss/sun4i-ss-core.c +64 -18
172 lines not on this page · raw message
drivers/crypto/sunxi-ss/sun4i-ss-hash.c +12 -0
@@ -19,17 +19,29 @@ int sun4i_hash_crainit(struct crypto_tfm *tfm)struct sun4i_tfm_ctx *op =crypto_tfm_ctx (tfm);struct ahash_alg *alg =__crypto_ahash_alg (tfm->__crt_alg);struct sun4i_ss_alg_template *algt; +int err;memset (op,0 ,sizeof (struct sun4i_tfm_ctx )); algt = container_of(alg, struct sun4i_ss_alg_template, alg.hash); op->ss = algt->ss; + err =pm_runtime_get_sync (op->ss->dev); +if (err <0 ) +return err; +crypto_ahash_set_reqsize (__crypto_ahash_cast (tfm),sizeof (struct sun4i_req_ctx ));return 0 ; } +void sun4i_hash_craexit (struct crypto_tfm *tfm) +{ +struct sun4i_tfm_ctx *op =crypto_tfm_ctx (tfm); + +pm_runtime_put (op->ss->dev); +} +/* sun4i_hash_init: initialize request context */ int sun4i_hash_init (struct ahash_request *areq) {
drivers/crypto/sunxi-ss/sun4i-ss-prng.c +8 -1
@@ -17,7 +17,7 @@ int sun4i_ss_prng_generate(struct crypto_rng *tfm, const u8 *src, {struct sun4i_ss_alg_template *algt;struct rng_alg *alg =crypto_rng_alg (tfm); -int i; +int i, err;u32 v;u32 *data = (u32 *)dst;const u32 mode =SS_OP_PRNG |SS_PRNG_CONTINUE |SS_ENABLED ;
@@ -28,6 +28,10 @@ int sun4i_ss_prng_generate(struct crypto_rng *tfm, const u8 *src, algt = container_of(alg, struct sun4i_ss_alg_template, alg.rng); ss = algt->ss; + err =pm_runtime_get_sync (ss->dev); +if (err <0 ) +return err; +spin_lock_bh (&ss->slock);writel (mode, ss->base +SS_CTL );
@@ -52,5 +56,8 @@ int sun4i_ss_prng_generate(struct crypto_rng *tfm, const u8 *src,writel (0 , ss->base +SS_CTL );spin_unlock_bh (&ss->slock); + +pm_runtime_put (ss->dev); +return 0 ; }
drivers/crypto/sunxi-ss/sun4i-ss.h +2 -0
@@ -22,6 +22,7 @@#include <linux/scatterlist.h> #include <linux/interrupt.h> #include <linux/delay.h> +#include <linux/pm_runtime.h> #include <crypto/md5.h> #include <crypto/skcipher.h> #include <crypto/sha.h>
@@ -177,6 +178,7 @@ struct sun4i_req_ctx { };int sun4i_hash_crainit (struct crypto_tfm *tfm); +void sun4i_hash_craexit (struct crypto_tfm *tfm);int sun4i_hash_init (struct ahash_request *areq);int sun4i_hash_update (struct ahash_request *areq);int sun4i_hash_final (struct ahash_request *areq);
Signature · 1 line
2.21.0
Re: [PATCH v3 2/2] crypto: sun4i-ss: enable pm_runtime
Quoted 6 lines · Corentin Labbe
This patch enables power management on the Security System. sun4i-ss now depends on PM because it simplify code and prevent some ifdef. But this is not a problem since arch maintainer want
ARCH_SUNXIto depend on PM in the future.Signed-off-by Corentin Labbe <[email protected]>
Thanks!
Maxime
Herbert Xu
maintainerQuoted 21 lines · Corentin Labbe
Hello
This serie enables power management in the sun4i-ss driver.
Regards
Changes since v2 ( https://lore.kernel.org/linux-arm-kernel/[email protected]/T/ ):
- depends on PM
- fusioned suspend/resume functions with sun4i_ssenable/disable
- fixed style problemChanges since v1:
- Fixed style in patch #1
- Check more return code of PM functions
- Add PM support in hash/prng
- reworked the probe order of PM functions and the PM strategyCorentin Labbe (2):
crypto: sun4i-ss: simplify enable/disable of the device
crypto: sun4i-ss: enablepm_runtime
Quoted 7 lines
drivers/crypto/Kconfig | 1 + drivers/crypto/sunxi-ss/sun4i-ss-cipher.c | 10 ++ drivers/crypto/sunxi-ss/sun4i-ss-core.c | 139 ++++++++++++++++------ drivers/crypto/sunxi-ss/sun4i-ss-hash.c | 12 ++ drivers/crypto/sunxi-ss/sun4i-ss-prng.c | 9 +- drivers/crypto/sunxi-ss/sun4i-ss.h | 2 + 6 files changed, 133 insertions(+), 40 deletions(-)
All applied. Thanks.
Signature · 3 lines
Email: Herbert Xu <[email protected]> Home Page: http://gondor.apana.org.au/~herbert/ PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt