btrfs: Add regression test for SINGLE profile conversion
PATCH 1/1 btrfs: Add regression test for SINGLE profile conversion
This is a regression test for the bug fixed by
'btrfs: Fix a regression which we can't convert to SINGLE profile'
--- tests/btrfs/194 | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/194.out | 2 ++ tests/btrfs/group | 1 + 3 files changed, 55 insertions(+) create mode 100755 tests/btrfs/194 create mode 100644 tests/btrfs/194.out
tests/btrfs/194 new file +52 -0
@@ -0,0 +1,52 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 SUSE Linux Products GmbH. All Rights Reserved. +# +# FS QA Test 194 +# +# Test that block groups profile can be converted to SINGLE. This is a regression +# test for 'btrfs: Fix a regression which we can't convert to SINGLE profile' +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +# Modify as appropriate. +_supported_fs btrfs +_supported_os Linux +_require_scratch_dev_pool 2 + +_scratch_dev_pool_get 2 +_scratch_pool_mkfs -draid1 + +_scratch_mount + +$BTRFS_UTIL_PROG balance start -dconvert=single $SCRATCH_MNT > $seqres.full 2>&1 +[ $? -eq 0 ] || _fail "Convert failed" + +_scratch_umount +_scratch_dev_pool_put + +echo "Silence is golden" +status=0 +exit
tests/btrfs/194.out new file +2 -0
@@ -0,0 +1,2 @@ +QA output created by 194 +Silence is golden
tests/btrfs/group +1 -0
@@ -196,3 +196,4 @@ 191 auto quick send dedupe 192 auto replay snapshot stress 193 auto quick qgroup enospc limit +194 auto quick volume balance
Signature · 1 line
2.7.4
Quoted 4 lines · Nikolay Borisov
This is a regression test for the bug fixed by
'btrfs: Fix a regression which we can't convert to SINGLE profile'Signed-off-by Nikolay Borisov <[email protected]>
Quoted 4 lines · Nikolay Borisov
This is a regression test for the bug fixed by
'btrfs: Fix a regression which we can't convert to SINGLE profile'Signed-off-by Nikolay Borisov <[email protected]>
Thanks,
Qu
Quoted 84 lines
--- tests/btrfs/194 | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/194.out | 2 ++ tests/btrfs/group | 1 + 3 files changed, 55 insertions(+) create mode 100755 tests/btrfs/194 create mode 100644 tests/btrfs/194.outtests/btrfs/194 new file +52
-0@@ -0,0 +1,52 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 SUSE Linux Products GmbH. All Rights Reserved. +# +# FS QA Test 194 +# +# Test that block groups profile can be converted to SINGLE. This is a regression +# test for 'btrfs: Fix a regression which we can't convert to SINGLE profile' +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +# Modify as appropriate. +_supported_fs btrfs +_supported_os Linux +_require_scratch_dev_pool 2 + +_scratch_dev_pool_get 2 +_scratch_pool_mkfs -draid1 + +_scratch_mount + +$BTRFS_UTIL_PROG balance start -dconvert=single $SCRATCH_MNT > $seqres.full 2>&1 +[ $? -eq 0 ] || _fail "Convert failed" + +_scratch_umount +_scratch_dev_pool_put + +echo "Silence is golden" +status=0 +exittests/btrfs/194.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 194 +Silence is goldentests/btrfs/group +1
-0@@ -196,3 +196,4 @@ 191 auto quick send dedupe 192 auto replay snapshot stress 193 auto quick qgroup enospc limit +194 auto quick volume balance
Quoted 53 lines · Nikolay Borisov
This is a regression test for the bug fixed by
'btrfs: Fix a regression which we can't convert to SINGLE profile'Signed-off-by Nikolay Borisov <[email protected]>--- tests/btrfs/194 | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/194.out | 2 ++ tests/btrfs/group | 1 + 3 files changed, 55 insertions(+) create mode 100755 tests/btrfs/194 create mode 100644 tests/btrfs/194.outtests/btrfs/194 new file +35
-0@@ -0,0 +1,52 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 SUSE Linux Products GmbH. All Rights Reserved. +# +# FS QA Test 194 +# +# Test that block groups profile can be converted to SINGLE. This is a regression +# test for 'btrfs: Fix a regression which we can't convert to SINGLE profile' +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +# Modify as appropriate. +_supported_fs btrfs
tests/btrfs/194 line 45
Quoted 10 lines
tests/btrfs/194 new file +10
-0+_supported_os Linux +_require_scratch_dev_pool 2 + +_scratch_dev_pool_get 2 +_scratch_pool_mkfs -draid1 + +_scratch_mount + +$BTRFS_UTIL_PROG balance start -dconvert=single $SCRATCH_MNT > $seqres.full 2>&1 +[ $? -eq 0 ] || _fail "Convert failed"
This indicates we're missing profile conversion tests in fstests. I think it's better to add a test framework/helpers and a full set of profile conversion tests instead of this raid1->single special case.
e.g.
Define a test case array, which describes what's the src/dst of this conversion and how many devices this case requires, e.g.
test_cases=(
# $nr_dev_min:$metadata:$data:$metadata_convert:$data_convert
"2:single:single:raid0:raid0"
"2:single:single:raid1:raid1"
"2:single:single:raid1:raid0"
"3:single:single:raid5:raid5"
"4:single:single:raid6:raid6"
"4:single:single:raid10:raid10"
"2:raid0:raid0:raid1:raid0"
"2:raid0:raid0:raid1:raid1"
"3:raid0:raid0:raid5:raid5"
"4:raid0:raid0:raid6:raid6"
"4:raid0:raid0:raid10:raid10"
"2:raid1:raid0:raid1:raid1"
"3:raid1:raid0:raid5:raid5"
"4:raid1:raid0:raid6:raid6"
"4:raid1:raid1:raid10:raid10"
"4:raid5:raid5:raid1:raid1"
"4:raid5:raid5:raid6:raid6"
"4:raid5:raid5:raid10:raid10"
"4:raid6:raid6:raid1:raid1"
"4:raid6:raid6:raid5:raid5"
"4:raid6:raid6:raid10:raid10"
"4:raid10:raid10:raid5:raid5"
"4:raid10:raid10:raid6:raid6"
<adding more cases>)
Then, create btrfs in source profile and populate fs with different kinds of files, compute sha1 digests of these files(fssum?), start conversion, after conversion compare sha1 digests.
And perhaps we could split the test cases into group and add them to different tests, in case putting all cases in a single test makes the test time too long.
Thanks,
Eryu
Quoted 27 lines
tests/btrfs/194 new file +7
-0+ +_scratch_umount +_scratch_dev_pool_put + +echo "Silence is golden" +status=0 +exittests/btrfs/194.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 194 +Silence is goldentests/btrfs/group +1
-0@@ -196,3 +196,4 @@ 191 auto quick send dedupe 192 auto replay snapshot stress 193 auto quick qgroup enospc limit +194 auto quick volume balanceSignature · 1 line
2.7.4
Quoted 60 lines · Eryu Guan
Quoted 59 lines · Nikolay Borisov
This is a regression test for the bug fixed by
'btrfs: Fix a regression which we can't convert to SINGLE profile'Signed-off-by Nikolay Borisov <[email protected]>--- tests/btrfs/194 | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/194.out | 2 ++ tests/btrfs/group | 1 + 3 files changed, 55 insertions(+) create mode 100755 tests/btrfs/194 create mode 100644 tests/btrfs/194.outtests/btrfs/194 new file +41
-0@@ -0,0 +1,52 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 SUSE Linux Products GmbH. All Rights Reserved. +# +# FS QA Test 194 +# +# Test that block groups profile can be converted to SINGLE. This is a regression +# test for 'btrfs: Fix a regression which we can't convert to SINGLE profile' +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +# Modify as appropriate. +_supported_fs btrfs +_supported_os Linux +_require_scratch_dev_pool 2 + +_scratch_dev_pool_get 2 +_scratch_pool_mkfs -draid1 +
Quoted 8 lines
tests/btrfs/194 line 45
Quoted 4 lines
tests/btrfs/194 new file +4
-0+_scratch_mount + +$BTRFS_UTIL_PROG balance start -dconvert=single $SCRATCH_MNT > $seqres.full 2>&1 +[ $? -eq 0 ] || _fail "Convert failed"This indicates we're missing profile conversion tests in fstests. I think it's better to add a test framework/helpers and a full set of profile conversion tests instead of this
raid1->singlespecial case.
It's not important to be raid1, the important bit here is any profile to single. As this is a specific, targeted test. But I do agree that having a conversion test will be a more robust, long-term solution. Will work on that.
Quoted 73 lines
e.g.
Define a test case array, which describes what's the src/dst of this conversion and how many devices this case requires, e.g.
test_cases=(
# $nr_dev_min:$metadata:$data:$metadata_convert:$data_convert "2:single:single:raid0:raid0" "2:single:single:raid1:raid1" "2:single:single:raid1:raid0" "3:single:single:raid5:raid5" "4:single:single:raid6:raid6" "4:single:single:raid10:raid10" "2:raid0:raid0:raid1:raid0" "2:raid0:raid0:raid1:raid1" "3:raid0:raid0:raid5:raid5" "4:raid0:raid0:raid6:raid6" "4:raid0:raid0:raid10:raid10" "2:raid1:raid0:raid1:raid1" "3:raid1:raid0:raid5:raid5" "4:raid1:raid0:raid6:raid6" "4:raid1:raid1:raid10:raid10" "4:raid5:raid5:raid1:raid1" "4:raid5:raid5:raid6:raid6" "4:raid5:raid5:raid10:raid10" "4:raid6:raid6:raid1:raid1" "4:raid6:raid6:raid5:raid5" "4:raid6:raid6:raid10:raid10" "4:raid10:raid10:raid5:raid5" "4:raid10:raid10:raid6:raid6" <adding more cases>)
Then, create btrfs in source profile and populate fs with different kinds of files, compute sha1 digests of these files(fssum?), start conversion, after conversion compare sha1 digests.
And perhaps we could split the test cases into group and add them to different tests, in case putting all cases in a single test makes the test time too long.
Thanks,
EryuQuoted 27 lines
tests/btrfs/194 new file +7
-0+ +_scratch_umount +_scratch_dev_pool_put + +echo "Silence is golden" +status=0 +exittests/btrfs/194.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 194 +Silence is goldentests/btrfs/group +1
-0@@ -196,3 +196,4 @@ 191 auto quick send dedupe 192 auto replay snapshot stress 193 auto quick qgroup enospc limit +194 auto quick volume balanceSignature · 1 line
2.7.4