Skip to contentSkip to conversation

drm/ast: Place cursor BOs at VRAM high-end

PATCH Superseded Thomas Zimmermann 2 participants 8 messages Sep 27, 2019 – Oct 2, 2019

Subsystems (3)
lore
Share & tools
lore

Thomas Zimmermann

author maintainer
#0 lore raw

v3 cover drm/ast: Place cursor BOs at VRAM high-end

(was: drm/ast/mgag200: Place cursor BOs at VRAM high-end)

This patchset cleans up the memory management of HW cursors in ast. It further moves the allocated cursor BOs to the of the video RAM to reduce memory fragmentation.

The ast driver manages cursor memory in a dedicated GEM VRAM buffer object. It uses a double-buffering scheme of alternating between offsets within the GEM BO. The code is convoluted and can lead to memory fragmentation if the BO is stored the middle of VRAM. This is especially a problem as ast devices only have a small amount of video memory (e.g., 8 MiB).

With this patchset, the cursor handling in ast is first split up into separate functions for copying cursor images, managing buffer objects, setting scanout addresses, and moving and hiding the cursor. Furthermore, the driver dedicates a few KiB at the high end of the device's video memory to storing the cursor's buffer objects. This prevents memory fragmentation.

The patchset has been tested on ast hardware.

v3:
* split-off ast patches into separate series
* move around ast_{show,hide}_cursor in a separate patch
* fix space-before-tab error near AST_HWC_SIGNATURE_CHECKSUM
v2:
* remove VRAM buffers in favor of GEM BOs
* manage BO placement with pin flag

Thomas Zimmermann (5):
drm/ast: Don't call ast_show_cursor() from ast_cursor_move() drm/ast: Move ast_{show,hide}_cursor() within source file drm/ast: Move cursor update code to ast_show_cursor() drm/ast: Move cursor offset swapping into ast_show_cursor() drm/ast: Allocate cursor BOs at high end of video memory

 drivers/gpu/drm/ast/ast_drv.h  |  43 +++---
 drivers/gpu/drm/ast/ast_mode.c | 235 +++++++++++++++++++--------------
 2 files changed, 158 insertions(+), 120 deletions(-)

--
2.23.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

author maintainer
#1 lore raw

PATCH v3 1/5 drm/ast: Don't call ast_show_cursor() from ast_cursor_move()

Separating the cursor's move() function from the show() function in preparation of further rework of the cursor update code.

'Showing' the cursor from within the move() function is required to update the cursor position.

---
 drivers/gpu/drm/ast/ast_mode.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/gpu/drm/ast/ast_mode.c +4 -1
index 6caa6ebfeaa8..a4cbf2d5ee0a 100644
@@ -1236,6 +1236,7 @@ static int ast_cursor_move(struct drm_crtc *crtc,
 	struct ast_private *ast = crtc->dev->dev_private;
 	int x_offset, y_offset;
 	u8 *sig;
+	u8 jreg;
 
 	sig = drm_gem_vram_kmap(drm_gem_vram_of_gem(ast->cursor_cache),
 				false, NULL);
@@ -1262,7 +1263,9 @@ static int ast_cursor_move(struct drm_crtc *crtc,
 	ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc7, ((y >> 8) & 0x07));
 
 	/* dummy write to fire HWC */
-	ast_show_cursor(crtc);
+	jreg = 0x02 |
+	       0x01; /* enable ARGB4444 cursor */
+	ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xcb, 0xfc, jreg);
 
 	return 0;
 }
Signature · 6 lines
2.23.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#2 lore raw

PATCH v3 2/5 drm/ast: Move ast_{show, hide}_cursor() within source file

In reply to Thomas Zimmermann

This patch only moves around code for easier review of later patches. No functional cahnges are made.

---
 drivers/gpu/drm/ast/ast_mode.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)
drivers/gpu/drm/ast/ast_mode.c +17 -17
index a4cbf2d5ee0a..5a9e6a87ea5b 100644
@@ -1064,23 +1064,6 @@ static void ast_i2c_destroy(struct ast_i2c_chan *i2c)
 	kfree(i2c);
 }
 
-static void ast_show_cursor(struct drm_crtc *crtc)
-{
-	struct ast_private *ast = crtc->dev->dev_private;
-	u8 jreg;
-
-	jreg = 0x2;
-	/* enable ARGB cursor */
-	jreg |= 1;
-	ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xcb, 0xfc, jreg);
-}
-
-static void ast_hide_cursor(struct drm_crtc *crtc)
-{
-	struct ast_private *ast = crtc->dev->dev_private;
-	ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xcb, 0xfc, 0x00);
-}
-
 static u32 copy_cursor_image(u8 *src, u8 *dst, int width, int height)
 {
 	union {
@@ -1137,6 +1120,23 @@ static u32 copy_cursor_image(u8 *src, u8 *dst, int width, int height)
 	return csum;
 }
 
+static void ast_show_cursor(struct drm_crtc *crtc)
+{
+	struct ast_private *ast = crtc->dev->dev_private;
+	u8 jreg;
+
+	jreg = 0x2;
+	/* enable ARGB cursor */
+	jreg |= 1;
+	ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xcb, 0xfc, jreg);
+}
+
+static void ast_hide_cursor(struct drm_crtc *crtc)
+{
+	struct ast_private *ast = crtc->dev->dev_private;
+	ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xcb, 0xfc, 0x00);
+}
+
 static int ast_cursor_set(struct drm_crtc *crtc,
 			  struct drm_file *file_priv,
 			  uint32_t handle,
Signature · 6 lines
2.23.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#3 lore raw

PATCH v3 3/5 drm/ast: Move cursor update code to ast_show_cursor()

In reply to Thomas Zimmermann

A call to ast's show-cursor function now receives the cursor image and updates the buffer. The change splits off image update and base-address update into separate functions.

v3:
* move ast_{show,hide}_cursor() in a previous patch

---
 drivers/gpu/drm/ast/ast_mode.c | 88 ++++++++++++++++++++--------------
 1 file changed, 53 insertions(+), 35 deletions(-)
drivers/gpu/drm/ast/ast_mode.c +53 -35
index 5a9e6a87ea5b..1294f0612fd5 100644
@@ -1120,20 +1120,69 @@ static u32 copy_cursor_image(u8 *src, u8 *dst, int width, int height)
 	return csum;
 }
 
-static void ast_show_cursor(struct drm_crtc *crtc)
+static int ast_cursor_update(void *dst, void *src, unsigned int width,
+			     unsigned int height)
+{
+	u32 csum;
+
+	/* do data transfer to cursor cache */
+	csum = copy_cursor_image(src, dst, width, height);
+
+	/* write checksum + signature */
+	dst += AST_HWC_SIZE;
+	writel(csum, dst);
+	writel(width, dst + AST_HWC_SIGNATURE_SizeX);
+	writel(height, dst + AST_HWC_SIGNATURE_SizeY);
+	writel(0, dst + AST_HWC_SIGNATURE_HOTSPOTX);
+	writel(0, dst + AST_HWC_SIGNATURE_HOTSPOTY);
+
+	return 0;
+}
+
+static void ast_cursor_set_base(struct ast_private *ast, u64 address)
+{
+	u8 addr0 = (address >> 3) & 0xff;
+	u8 addr1 = (address >> 11) & 0xff;
+	u8 addr2 = (address >> 19) & 0xff;
+
+	ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc8, addr0);
+	ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc9, addr1);
+	ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xca, addr2);
+}
+
+static int ast_show_cursor(struct drm_crtc *crtc, void *dst, void *src,
+			   unsigned int width, unsigned int height,
+			   u64 dst_gpu)
 {
 	struct ast_private *ast = crtc->dev->dev_private;
+	struct ast_crtc *ast_crtc = to_ast_crtc(crtc);
+	int ret;
 	u8 jreg;
 
+	dst += (AST_HWC_SIZE + AST_HWC_SIGNATURE_SIZE)*ast->next_cursor;
+
+	ret = ast_cursor_update(dst, src, width, height);
+	if (ret)
+		return ret;
+	ast_cursor_set_base(ast, dst_gpu);
+
+	ast->next_cursor = (ast->next_cursor + 1) % AST_DEFAULT_HWC_NUM;
+
+	ast_crtc->offset_x = AST_MAX_HWC_WIDTH - width;
+	ast_crtc->offset_y = AST_MAX_HWC_WIDTH - height;
+
 	jreg = 0x2;
 	/* enable ARGB cursor */
 	jreg |= 1;
 	ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xcb, 0xfc, jreg);
+
+	return 0;
 }
 
 static void ast_hide_cursor(struct drm_crtc *crtc)
 {
 	struct ast_private *ast = crtc->dev->dev_private;
+
 	ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xcb, 0xfc, 0x00);
 }
 
@@ -1144,12 +1193,9 @@ static int ast_cursor_set(struct drm_crtc *crtc,
 			  uint32_t height)
 {
 	struct ast_private *ast = crtc->dev->dev_private;
-	struct ast_crtc *ast_crtc = to_ast_crtc(crtc);
 	struct drm_gem_object *obj;
 	struct drm_gem_vram_object *gbo;
 	s64 dst_gpu;
-	u64 gpu_addr;
-	u32 csum;
 	int ret;
 	u8 *src, *dst;
 
@@ -1185,37 +1231,9 @@ static int ast_cursor_set(struct drm_crtc *crtc,
 		goto err_drm_gem_vram_vunmap;
 	}
 
-	dst += (AST_HWC_SIZE + AST_HWC_SIGNATURE_SIZE)*ast->next_cursor;
-
-	/* do data transfer to cursor cache */
-	csum = copy_cursor_image(src, dst, width, height);
-
-	/* write checksum + signature */
-	{
-		struct drm_gem_vram_object *dst_gbo =
-			drm_gem_vram_of_gem(ast->cursor_cache);
-		u8 *dst = drm_gem_vram_kmap(dst_gbo, false, NULL);
-		dst += (AST_HWC_SIZE + AST_HWC_SIGNATURE_SIZE)*ast->next_cursor + AST_HWC_SIZE;
-		writel(csum, dst);
-		writel(width, dst + AST_HWC_SIGNATURE_SizeX);
-		writel(height, dst + AST_HWC_SIGNATURE_SizeY);
-		writel(0, dst + AST_HWC_SIGNATURE_HOTSPOTX);
-		writel(0, dst + AST_HWC_SIGNATURE_HOTSPOTY);
-
-		/* set pattern offset */
-		gpu_addr = (u64)dst_gpu;
-		gpu_addr += (AST_HWC_SIZE + AST_HWC_SIGNATURE_SIZE)*ast->next_cursor;
-		gpu_addr >>= 3;
-		ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc8, gpu_addr & 0xff);
-		ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc9, (gpu_addr >> 8) & 0xff);
-		ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xca, (gpu_addr >> 16) & 0xff);
-	}
-	ast_crtc->offset_x = AST_MAX_HWC_WIDTH - width;
-	ast_crtc->offset_y = AST_MAX_HWC_WIDTH - height;
-
-	ast->next_cursor = (ast->next_cursor + 1) % AST_DEFAULT_HWC_NUM;
-
-	ast_show_cursor(crtc);
+	ret = ast_show_cursor(crtc, dst, src, width, height, dst_gpu);
+	if (ret)
+		goto err_drm_gem_vram_kunmap;
 
 	drm_gem_vram_vunmap(gbo, src);
 	drm_gem_object_put_unlocked(obj);
Signature · 6 lines
2.23.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#4 lore raw

PATCH v3 4/5 drm/ast: Move cursor offset swapping into ast_show_cursor()

In reply to Thomas Zimmermann

Selecting the correct offset for the new cursor image is not relevant outside of ast_show_cursor(). Let the function do the work.

---
 drivers/gpu/drm/ast/ast_mode.c | 57 ++++++++++++++++++----------------
 1 file changed, 31 insertions(+), 26 deletions(-)
drivers/gpu/drm/ast/ast_mode.c +31 -26
index 1294f0612fd5..6a517ffb1c5c 100644
@@ -1150,23 +1150,34 @@ static void ast_cursor_set_base(struct ast_private *ast, u64 address)
 	ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xca, addr2);
 }
 
-static int ast_show_cursor(struct drm_crtc *crtc, void *dst, void *src,
-			   unsigned int width, unsigned int height,
-			   u64 dst_gpu)
+static int ast_show_cursor(struct drm_crtc *crtc, void *src,
+			   unsigned int width, unsigned int height)
 {
 	struct ast_private *ast = crtc->dev->dev_private;
 	struct ast_crtc *ast_crtc = to_ast_crtc(crtc);
+	struct drm_gem_vram_object *gbo;
+	u8 *dst, *dst_next;
+	s64 off;
 	int ret;
 	u8 jreg;
 
-	dst += (AST_HWC_SIZE + AST_HWC_SIGNATURE_SIZE)*ast->next_cursor;
+	gbo = drm_gem_vram_of_gem(ast->cursor_cache);
+	dst = drm_gem_vram_vmap(gbo);
+	if (IS_ERR(dst))
+		return PTR_ERR(dst);
+	off = drm_gem_vram_offset(gbo);
+	if (off < 0) {
+		ret = (int)off;
+		goto err_drm_gem_vram_vunmap;
+	}
 
-	ret = ast_cursor_update(dst, src, width, height);
-	if (ret)
-		return ret;
-	ast_cursor_set_base(ast, dst_gpu);
+	dst_next = dst + (AST_HWC_SIZE + AST_HWC_SIGNATURE_SIZE) *
+		   ast->next_cursor;
 
-	ast->next_cursor = (ast->next_cursor + 1) % AST_DEFAULT_HWC_NUM;
+	ret = ast_cursor_update(dst_next, src, width, height);
+	if (ret)
+		goto err_drm_gem_vram_vunmap;
+	ast_cursor_set_base(ast, off);
 
 	ast_crtc->offset_x = AST_MAX_HWC_WIDTH - width;
 	ast_crtc->offset_y = AST_MAX_HWC_WIDTH - height;
@@ -1176,7 +1187,15 @@ static int ast_show_cursor(struct drm_crtc *crtc, void *dst, void *src,
 	jreg |= 1;
 	ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xcb, 0xfc, jreg);
 
+	ast->next_cursor = (ast->next_cursor + 1) % AST_DEFAULT_HWC_NUM;
+
+	drm_gem_vram_vunmap(gbo, dst);
+
 	return 0;
+
+err_drm_gem_vram_vunmap:
+	drm_gem_vram_vunmap(gbo, dst);
+	return ret;
 }
 
 static void ast_hide_cursor(struct drm_crtc *crtc)
@@ -1192,12 +1211,10 @@ static int ast_cursor_set(struct drm_crtc *crtc,
 			  uint32_t width,
 			  uint32_t height)
 {
-	struct ast_private *ast = crtc->dev->dev_private;
 	struct drm_gem_object *obj;
 	struct drm_gem_vram_object *gbo;
-	s64 dst_gpu;
+	u8 *src;
 	int ret;
-	u8 *src, *dst;
 
 	if (!handle) {
 		ast_hide_cursor(crtc);
@@ -1219,21 +1236,9 @@ static int ast_cursor_set(struct drm_crtc *crtc,
 		goto err_drm_gem_object_put_unlocked;
 	}
 
-	dst = drm_gem_vram_kmap(drm_gem_vram_of_gem(ast->cursor_cache),
-				false, NULL);
-	if (IS_ERR(dst)) {
-		ret = PTR_ERR(dst);
-		goto err_drm_gem_vram_vunmap;
-	}
-	dst_gpu = drm_gem_vram_offset(drm_gem_vram_of_gem(ast->cursor_cache));
-	if (dst_gpu < 0) {
-		ret = (int)dst_gpu;
-		goto err_drm_gem_vram_vunmap;
-	}
-
-	ret = ast_show_cursor(crtc, dst, src, width, height, dst_gpu);
+	ret = ast_show_cursor(crtc, src, width, height);
 	if (ret)
-		goto err_drm_gem_vram_kunmap;
+		goto err_drm_gem_vram_vunmap;
 
 	drm_gem_vram_vunmap(gbo, src);
 	drm_gem_object_put_unlocked(obj);
Signature · 6 lines
2.23.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#5 lore raw

PATCH v3 5/5 drm/ast: Allocate cursor BOs at high end of video memory

In reply to Thomas Zimmermann

By putting cursor BOs at the high end of the video memory, we can avoid memory fragmentation. Starting at the low end, contiguous video memory is available for framebuffers.

The patch also simplifies the buffer swapping by splitting
struct ast_private.cursor_cache BO into two separate boffer objects. Cursor images alternate between these buffers instead of offsets within cursor_cache.

v3:
* fixes space-before-tab error near AST_HWC_SIGNATURE_CHECKSUM

---
 drivers/gpu/drm/ast/ast_drv.h  | 43 +++++++++-------
 drivers/gpu/drm/ast/ast_mode.c | 91 ++++++++++++++++++----------------
 2 files changed, 73 insertions(+), 61 deletions(-)
drivers/gpu/drm/ast/ast_drv.h +24 -19
index 244cc7c382af..ff161bd622f3 100644
@@ -82,6 +82,25 @@ enum ast_tx_chip {
 #define AST_DRAM_4Gx16   7
 #define AST_DRAM_8Gx16   8
 
+
+#define AST_MAX_HWC_WIDTH	64
+#define AST_MAX_HWC_HEIGHT	64
+
+#define AST_HWC_SIZE		(AST_MAX_HWC_WIDTH * AST_MAX_HWC_HEIGHT * 2)
+#define AST_HWC_SIGNATURE_SIZE	32
+
+#define AST_DEFAULT_HWC_NUM	2
+
+/* define for signature structure */
+#define AST_HWC_SIGNATURE_CHECKSUM	0x00
+#define AST_HWC_SIGNATURE_SizeX		0x04
+#define AST_HWC_SIGNATURE_SizeY		0x08
+#define AST_HWC_SIGNATURE_X		0x0C
+#define AST_HWC_SIGNATURE_Y		0x10
+#define AST_HWC_SIGNATURE_HOTSPOTX	0x14
+#define AST_HWC_SIGNATURE_HOTSPOTY	0x18
+
+
 struct ast_private {
 	struct drm_device *dev;
 
@@ -97,8 +116,11 @@ struct ast_private {
 
 	int fb_mtrr;
 
-	struct drm_gem_object *cursor_cache;
-	int next_cursor;
+	struct {
+		struct drm_gem_vram_object *gbo[AST_DEFAULT_HWC_NUM];
+		unsigned int next_index;
+	} cursor;
+
 	bool support_wide_screen;
 	enum {
 		ast_use_p2a,
@@ -199,23 +221,6 @@ static inline void ast_open_key(struct ast_private *ast)
 
 #define AST_VIDMEM_DEFAULT_SIZE AST_VIDMEM_SIZE_8M
 
-#define AST_MAX_HWC_WIDTH 64
-#define AST_MAX_HWC_HEIGHT 64
-
-#define AST_HWC_SIZE                (AST_MAX_HWC_WIDTH*AST_MAX_HWC_HEIGHT*2)
-#define AST_HWC_SIGNATURE_SIZE      32
-
-#define AST_DEFAULT_HWC_NUM 2
-/* define for signature structure */
-#define AST_HWC_SIGNATURE_CHECKSUM  0x00
-#define AST_HWC_SIGNATURE_SizeX     0x04
-#define AST_HWC_SIGNATURE_SizeY     0x08
-#define AST_HWC_SIGNATURE_X         0x0C
-#define AST_HWC_SIGNATURE_Y         0x10
-#define AST_HWC_SIGNATURE_HOTSPOTX  0x14
-#define AST_HWC_SIGNATURE_HOTSPOTY  0x18
-
-
 struct ast_i2c_chan {
 	struct i2c_adapter adapter;
 	struct drm_device *dev;
drivers/gpu/drm/ast/ast_mode.c +49 -42

146 lines not on this page · raw message

Signature · 6 lines
2.23.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Acked-by on the v3 series
#6 lore raw
In reply to Thomas Zimmermann
Quoted 22 lines · Thomas Zimmermann

(was: drm/ast/mgag200: Place cursor BOs at VRAM high-end)

This patchset cleans up the memory management of HW cursors in ast. It further moves the allocated cursor BOs to the of the video RAM to reduce memory fragmentation.

The ast driver manages cursor memory in a dedicated GEM VRAM buffer object. It uses a double-buffering scheme of alternating between offsets within the GEM BO. The code is convoluted and can lead to memory fragmentation if the BO is stored the middle of VRAM. This is especially a problem as ast devices only have a small amount of video memory (e.g., 8 MiB).

With this patchset, the cursor handling in ast is first split up into separate functions for copying cursor images, managing buffer objects, setting scanout addresses, and moving and hiding the cursor. Furthermore, the driver dedicates a few KiB at the high end of the device's video memory to storing the cursor's buffer objects. This prevents memory fragmentation.

The patchset has been tested on ast hardware.

Quoted 7 lines

v3:
* split-off ast patches into separate series
* move around ast_{show,hide}_cursor in a separate patch
* fix space-before-tab error near AST_HWC_SIGNATURE_CHECKSUM
v2:
* remove VRAM buffers in favor of GEM BOs
* manage BO placement with pin flag

Looks all sane to me, series is

Quoted 9 lines

Thomas Zimmermann (5):
drm/ast: Don't call ast_show_cursor() from ast_cursor_move() drm/ast: Move ast_{show,hide}_cursor() within source file drm/ast: Move cursor update code to ast_show_cursor() drm/ast: Move cursor offset swapping into ast_show_cursor() drm/ast: Allocate cursor BOs at high end of video memory

Quoted 7 lines
 drivers/gpu/drm/ast/ast_drv.h  |  43 +++---
 drivers/gpu/drm/ast/ast_mode.c | 235 +++++++++++++++++++--------------
 2 files changed, 158 insertions(+), 120 deletions(-)

--
2.23.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

author maintainer
#7 lore raw

Hi

Am 02.10.19 um 10:59 schrieb Gerd Hoffmann:

Quoted 31 lines · Thomas Zimmermann
Quoted 22 lines

(was: drm/ast/mgag200: Place cursor BOs at VRAM high-end)

This patchset cleans up the memory management of HW cursors in ast. It further moves the allocated cursor BOs to the of the video RAM to reduce memory fragmentation.

The ast driver manages cursor memory in a dedicated GEM VRAM buffer object. It uses a double-buffering scheme of alternating between offsets within the GEM BO. The code is convoluted and can lead to memory fragmentation if the BO is stored the middle of VRAM. This is especially a problem as ast devices only have a small amount of video memory (e.g., 8 MiB).

With this patchset, the cursor handling in ast is first split up into separate functions for copying cursor images, managing buffer objects, setting scanout addresses, and moving and hiding the cursor. Furthermore, the driver dedicates a few KiB at the high end of the device's video memory to storing the cursor's buffer objects. This prevents memory fragmentation.

The patchset has been tested on ast hardware.

Quoted 7 lines

v3:
* split-off ast patches into separate series
* move around ast_{show,hide}_cursor in a separate patch
* fix space-before-tab error near AST_HWC_SIGNATURE_CHECKSUM
v2:
* remove VRAM buffers in favor of GEM BOs
* manage BO placement with pin flag

Quoted 2 lines

Looks all sane to me, series is

Thanks for taking the time to review patches for this fairly obscure code.

Best regards
Thomas

Quoted 22 lines
Quoted 10 lines

Thomas Zimmermann (5):
drm/ast: Don't call ast_show_cursor() from ast_cursor_move() drm/ast: Move ast_{show,hide}_cursor() within source file drm/ast: Move cursor update code to ast_show_cursor() drm/ast: Move cursor offset swapping into ast_show_cursor() drm/ast: Allocate cursor BOs at high end of video memory

Quoted 7 lines
  drivers/gpu/drm/ast/ast_drv.h  |  43 +++---
  drivers/gpu/drm/ast/ast_mode.c | 235 +++++++++++++++++++--------------
  2 files changed, 158 insertions(+), 120 deletions(-)

--
2.23.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Signature · 9 lines
Thomas Zimmermann
Graphics Driver Developer
SUSE Linux GmbH, Maxfeldstrasse 5, 90409 Nuernberg, Germany
GF: Felix Imendörffer, Mary Higgins, Sri Rasiah
HRB 21284 (AG Nürnberg)
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel