Skip to contentSkip to conversation

drivers/clk: convert VL struct to struct_size

PATCH Applied Stephen Kitt 3 participants 4 messages Sep 27, 2019 – Nov 8, 2019 1 message not in the archive

Subsystems (7)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drivers/clk: convert VL struct to struct_size

There are a few manually-calculated variable-length struct allocations left, this converts them to use struct_size.

---
 drivers/clk/at91/sckc.c                     | 3 +--
 drivers/clk/imgtec/clk-boston.c             | 3 +--
 drivers/clk/ingenic/tcu.c                   | 3 +--
 drivers/clk/mvebu/ap-cpu-clk.c              | 4 ++--
 drivers/clk/mvebu/cp110-system-controller.c | 4 ++--
 drivers/clk/samsung/clk.c                   | 3 +--
 drivers/clk/uniphier/clk-uniphier-core.c    | 3 +--
 7 files changed, 9 insertions(+), 14 deletions(-)
drivers/clk/at91/sckc.c +1 -2
index 9bfe9a28294a..5ad6180449cb 100644
@@ -478,8 +478,7 @@ static void __init of_sam9x60_sckc_setup(struct device_node *np)
 	if (IS_ERR(slow_osc))
 		goto unregister_slow_rc;
 
-	clk_data = kzalloc(sizeof(*clk_data) + (2 * sizeof(struct clk_hw *)),
-			   GFP_KERNEL);
+	clk_data = kzalloc(struct_size(clk_data, hws, 2), GFP_KERNEL);
 	if (!clk_data)
 		goto unregister_slow_osc;
 
drivers/clk/imgtec/clk-boston.c +1 -2
index 33ab4ff61165..b00cbd045af5 100644
@@ -58,8 +58,7 @@ static void __init clk_boston_setup(struct device_node *np)
 	cpu_div = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_CLK1DIV);
 	cpu_freq = mult_frac(in_freq, mul, cpu_div);
 
-	onecell = kzalloc(sizeof(*onecell) +
-			  (BOSTON_CLK_COUNT * sizeof(struct clk_hw *)),
+	onecell = kzalloc(struct_size(onecell, hws, BOSTON_CLK_COUNT),
 			  GFP_KERNEL);
 	if (!onecell)
 		return;
drivers/clk/ingenic/tcu.c +1 -2
index a1a5f9cb439e..ad7daa494fd4 100644
@@ -358,8 +358,7 @@ static int __init ingenic_tcu_probe(struct device_node *np)
 		}
 	}
 
-	tcu->clocks = kzalloc(sizeof(*tcu->clocks) +
-			      sizeof(*tcu->clocks->hws) * TCU_CLK_COUNT,
+	tcu->clocks = kzalloc(struct_size(tcu->clocks, hws, TCU_CLK_COUNT),
 			      GFP_KERNEL);
 	if (!tcu->clocks) {
 		ret = -ENOMEM;
drivers/clk/mvebu/ap-cpu-clk.c +2 -2
index af5e5acad370..6b394302c76a 100644
@@ -274,8 +274,8 @@ static int ap_cpu_clock_probe(struct platform_device *pdev)
 	if (!ap_cpu_clk)
 		return -ENOMEM;
 
-	ap_cpu_data = devm_kzalloc(dev, sizeof(*ap_cpu_data) +
-				sizeof(struct clk_hw *) * nclusters,
+	ap_cpu_data = devm_kzalloc(dev, struct_size(ap_cpu_data, hws,
+						    nclusters),
 				GFP_KERNEL);
 	if (!ap_cpu_data)
 		return -ENOMEM;
drivers/clk/mvebu/cp110-system-controller.c +2 -2
index 808463276145..84c8900542e4 100644
@@ -235,8 +235,8 @@ static int cp110_syscon_common_probe(struct platform_device *pdev,
 	if (ret)
 		return ret;
 
-	cp110_clk_data = devm_kzalloc(dev, sizeof(*cp110_clk_data) +
-				      sizeof(struct clk_hw *) * CP110_CLK_NUM,
+	cp110_clk_data = devm_kzalloc(dev, struct_size(cp110_clk_data, hws,
+						       CP110_CLK_NUM),
 				      GFP_KERNEL);
 	if (!cp110_clk_data)
 		return -ENOMEM;
drivers/clk/samsung/clk.c +1 -2
index e544a38106dd..dad31308c071 100644
@@ -60,8 +60,7 @@ struct samsung_clk_provider *__init samsung_clk_init(struct device_node *np,
 	struct samsung_clk_provider *ctx;
 	int i;
 
-	ctx = kzalloc(sizeof(struct samsung_clk_provider) +
-		      sizeof(*ctx->clk_data.hws) * nr_clks, GFP_KERNEL);
+	ctx = kzalloc(struct_size(ctx, clk_data.hws, nr_clks), GFP_KERNEL);
 	if (!ctx)
 		panic("could not allocate clock provider context.\n");
 
drivers/clk/uniphier/clk-uniphier-core.c +1 -2
index c6aaca73cf86..12380236d7ab 100644
@@ -64,8 +64,7 @@ static int uniphier_clk_probe(struct platform_device *pdev)
 	for (p = data; p->name; p++)
 		clk_num = max(clk_num, p->idx + 1);
 
-	hw_data = devm_kzalloc(dev,
-			sizeof(*hw_data) + clk_num * sizeof(struct clk_hw *),
+	hw_data = devm_kzalloc(dev, struct_size(hw_data, hws, clk_num),
 			GFP_KERNEL);
 	if (!hw_data)
 		return -ENOMEM;
Signature · 1 line
2.20.1
Acked-by on v1 1/1
#1 lore raw
Quoted 3 lines · Stephen Kitt

There are a few manually-calculated variable-length struct allocations left, this converts them to use struct_size.

How did you find this?

Please, mention the tool you used to find this in the commit log. With that you can add my

Thanks
--
Gustavo

Quoted 112 lines
---
 drivers/clk/at91/sckc.c                     | 3 +--
 drivers/clk/imgtec/clk-boston.c             | 3 +--
 drivers/clk/ingenic/tcu.c                   | 3 +--
 drivers/clk/mvebu/ap-cpu-clk.c              | 4 ++--
 drivers/clk/mvebu/cp110-system-controller.c | 4 ++--
 drivers/clk/samsung/clk.c                   | 3 +--
 drivers/clk/uniphier/clk-uniphier-core.c    | 3 +--
 7 files changed, 9 insertions(+), 14 deletions(-)
drivers/clk/at91/sckc.c +1 -2
index 9bfe9a28294a..5ad6180449cb 100644
@@ -478,8 +478,7 @@ static void __init of_sam9x60_sckc_setup(struct device_node *np)
 	if (IS_ERR(slow_osc))
 		goto unregister_slow_rc;
 
-	clk_data = kzalloc(sizeof(*clk_data) + (2 * sizeof(struct clk_hw *)),
-			   GFP_KERNEL);
+	clk_data = kzalloc(struct_size(clk_data, hws, 2), GFP_KERNEL);
 	if (!clk_data)
 		goto unregister_slow_osc;
 
drivers/clk/imgtec/clk-boston.c +1 -2
index 33ab4ff61165..b00cbd045af5 100644
@@ -58,8 +58,7 @@ static void __init clk_boston_setup(struct device_node *np)
 	cpu_div = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_CLK1DIV);
 	cpu_freq = mult_frac(in_freq, mul, cpu_div);
 
-	onecell = kzalloc(sizeof(*onecell) +
-			  (BOSTON_CLK_COUNT * sizeof(struct clk_hw *)),
+	onecell = kzalloc(struct_size(onecell, hws, BOSTON_CLK_COUNT),
 			  GFP_KERNEL);
 	if (!onecell)
 		return;
drivers/clk/ingenic/tcu.c +1 -2
index a1a5f9cb439e..ad7daa494fd4 100644
@@ -358,8 +358,7 @@ static int __init ingenic_tcu_probe(struct device_node *np)
 		}
 	}
 
-	tcu->clocks = kzalloc(sizeof(*tcu->clocks) +
-			      sizeof(*tcu->clocks->hws) * TCU_CLK_COUNT,
+	tcu->clocks = kzalloc(struct_size(tcu->clocks, hws, TCU_CLK_COUNT),
 			      GFP_KERNEL);
 	if (!tcu->clocks) {
 		ret = -ENOMEM;
drivers/clk/mvebu/ap-cpu-clk.c +2 -2
index af5e5acad370..6b394302c76a 100644
@@ -274,8 +274,8 @@ static int ap_cpu_clock_probe(struct platform_device *pdev)
 	if (!ap_cpu_clk)
 		return -ENOMEM;
 
-	ap_cpu_data = devm_kzalloc(dev, sizeof(*ap_cpu_data) +
-				sizeof(struct clk_hw *) * nclusters,
+	ap_cpu_data = devm_kzalloc(dev, struct_size(ap_cpu_data, hws,
+						    nclusters),
 				GFP_KERNEL);
 	if (!ap_cpu_data)
 		return -ENOMEM;
drivers/clk/mvebu/cp110-system-controller.c +2 -2
index 808463276145..84c8900542e4 100644
@@ -235,8 +235,8 @@ static int cp110_syscon_common_probe(struct platform_device *pdev,
 	if (ret)
 		return ret;
 
-	cp110_clk_data = devm_kzalloc(dev, sizeof(*cp110_clk_data) +
-				      sizeof(struct clk_hw *) * CP110_CLK_NUM,
+	cp110_clk_data = devm_kzalloc(dev, struct_size(cp110_clk_data, hws,
+						       CP110_CLK_NUM),
 				      GFP_KERNEL);
 	if (!cp110_clk_data)
 		return -ENOMEM;
drivers/clk/samsung/clk.c +1 -2
index e544a38106dd..dad31308c071 100644
@@ -60,8 +60,7 @@ struct samsung_clk_provider *__init samsung_clk_init(struct device_node *np,
 	struct samsung_clk_provider *ctx;
 	int i;
 
-	ctx = kzalloc(sizeof(struct samsung_clk_provider) +
-		      sizeof(*ctx->clk_data.hws) * nr_clks, GFP_KERNEL);
+	ctx = kzalloc(struct_size(ctx, clk_data.hws, nr_clks), GFP_KERNEL);
 	if (!ctx)
 		panic("could not allocate clock provider context.\n");
 
drivers/clk/uniphier/clk-uniphier-core.c +1 -2
index c6aaca73cf86..12380236d7ab 100644
@@ -64,8 +64,7 @@ static int uniphier_clk_probe(struct platform_device *pdev)
 	for (p = data; p->name; p++)
 		clk_num = max(clk_num, p->idx + 1);
 
-	hw_data = devm_kzalloc(dev,
-			sizeof(*hw_data) + clk_num * sizeof(struct clk_hw *),
+	hw_data = devm_kzalloc(dev, struct_size(hw_data, hws, clk_num),
 			GFP_KERNEL);
 	if (!hw_data)
 		return -ENOMEM;

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw
Quoted 5 lines · Stephen Boyd

Quoting Gustavo A. R. Silva (2019-10-02 12:20:28)

Quoted 4 lines · Stephen Kitt
Quoted 2 lines

There are a few manually-calculated variable-length struct allocations left, this converts them to use struct_size.

Quoted 8 lines
Quoted 6 lines

How did you find this?

Please, mention the tool you used to find this in the commit log. With that you can add my

Any answer? I'm tempted to just apply the patch anyway.

Sorry, I hadn’t seen Gustavo’s email!

I didn’t use anything particularly fancy to find these, my history says

	git grep -A1 'kzalloc.*sizeof[^_].*+'

and manual review. I noticed that clk/ had a number of hits, but also commits to switch to struct_size so I reckoned it was worth pursuing the exercise there.

Is it worth adding that to the commit message?

Regards,

Stephen