rtc: Add support for century bits to m41t62 (rv4162) RTC devices
PATCH 1/1 rtc: Add support for century bits to m41t62 (rv4162) RTC devices
This change adds support for 'century bits' on 4162 family of RTC devices (from ST or microcrystal), which allow storing time beyond year 2099.
For rv4162 century bits - CB1[7]:CB0[6] are stored in reg6 - 0x6 (MONTH):
CB1 CB0
0 0 (year 2000 - 2099) 0 1 (year 2100 - 2199) 1 0 (year 2200 - 2299) 1 1 (year 2300 - 2399)
The driver has been also adjusted to allow setting time up to year 2399 if the M41T80_FEATURE_CB is set in its DTS/I2C data.
There shall be no functional changes for devices not supporting this feature. However, other devices - like m41t80 - have different approaches to handle century information.
--- drivers/rtc/rtc-m41t80.c | 56 +++++++++++++++++++++++++++++++--------- 1 file changed, 44 insertions(+), 12 deletions(-)
drivers/rtc/rtc-m41t80.c +44 -12
@@ -68,9 +68,22 @@#define M41T80_FEATURE_SQ BIT(2)/* Squarewave feature */ #define M41T80_FEATURE_WD BIT(3)/* Extra watchdog resolution */ #define M41T80_FEATURE_SQ_ALT BIT(4)/* RSx bits are in reg 4 */ +#define M41T80_FEATURE_CB BIT(5)/* Century Bits[CB1:CB0] are in reg 6 */ + +/* +* Century bits - CB1[7]:CB0[6] in reg6 (MONTH): +* CB1 CB0 +* 0 0 (year 2000 - 2099) +* 0 1 (year 2100 - 2199) +* 1 0 (year 2200 - 2299) +* 1 1 (year 2300 - 2399) +*/ +#define M41T80_CB_SHIFT 6/* CB[0] bit position */ +#define M41T80_CB_MASK 0xc0/* Century bits mask */ static const struct i2c_device_id m41t80_id[] = { - {"m41t62" ,M41T80_FEATURE_SQ |M41T80_FEATURE_SQ_ALT }, + {"m41t62" ,M41T80_FEATURE_SQ |M41T80_FEATURE_SQ_ALT | +M41T80_FEATURE_CB }, {"m41t65" ,M41T80_FEATURE_HT |M41T80_FEATURE_WD }, {"m41t80" ,M41T80_FEATURE_SQ }, {"m41t81" ,M41T80_FEATURE_HT |M41T80_FEATURE_SQ },
@@ -80,7 +93,8 @@ static const struct i2c_device_id m41t80_id[] = { { "m41st84", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, { "m41st85", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, { "m41st87", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, - { "rv4162", M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT }, + { "rv4162", M41T80_FEATURE_SQ | M41T80_FEATURE_WD | + M41T80_FEATURE_SQ_ALT | M41T80_FEATURE_CB}, { } };MODULE_DEVICE_TABLE (i2c, m41t80_id);
@@ -88,7 +102,8 @@ MODULE_DEVICE_TABLE(i2c, m41t80_id);static const struct of_device_id m41t80_of_match[] = { { .compatible ="st,m41t62" , - .data = (void *)(M41T80_FEATURE_SQ |M41T80_FEATURE_SQ_ALT ) + .data = (void *)(M41T80_FEATURE_SQ |M41T80_FEATURE_SQ_ALT | +M41T80_FEATURE_CB ) }, { .compatible ="st,m41t65" ,
@@ -128,16 +143,19 @@ static const struct of_device_id m41t80_of_match[] = { }, { .compatible = "microcrystal,rv4162", - .data = (void *)(M41T80_FEATURE_SQ |M41T80_FEATURE_WD |M41T80_FEATURE_SQ_ALT ) + .data = (void *)(M41T80_FEATURE_SQ |M41T80_FEATURE_WD | +M41T80_FEATURE_SQ_ALT |M41T80_FEATURE_CB ) }, /* DT compatibility only, do not use compatibles below: */ { .compatible = "st,rv4162", - .data = (void *)(M41T80_FEATURE_SQ |M41T80_FEATURE_WD |M41T80_FEATURE_SQ_ALT ) + .data = (void *)(M41T80_FEATURE_SQ |M41T80_FEATURE_WD | +M41T80_FEATURE_SQ_ALT |M41T80_FEATURE_CB ) }, { .compatible = "rv4162", - .data = (void *)(M41T80_FEATURE_SQ |M41T80_FEATURE_WD |M41T80_FEATURE_SQ_ALT ) + .data = (void *)(M41T80_FEATURE_SQ |M41T80_FEATURE_WD | +M41T80_FEATURE_SQ_ALT |M41T80_FEATURE_CB ) }, { } };
@@ -197,6 +215,7 @@ static irqreturn_t m41t80_handle_irq(int irq, void *dev_id)static int m41t80_rtc_read_time (struct device *dev,struct rtc_time *tm) {struct i2c_client *client =to_i2c_client (dev); +struct m41t80_data *clientdata =i2c_get_clientdata (client);unsigned char buf[8 ];int err, flags;
@@ -222,9 +241,13 @@ static int m41t80_rtc_read_time(struct device *dev, struct rtc_time *tm) tm->tm_mday =bcd2bin (buf[M41T80_REG_DAY ] &0x3f ); tm->tm_wday = buf[M41T80_REG_WDAY ] &0x07 ; tm->tm_mon =bcd2bin (buf[M41T80_REG_MON ] &0x1f ) -1 ; - -/* assume 20YY not 19YY, and ignore the Century Bit */ +/* assume 20YY not 19YY */ tm->tm_year =bcd2bin (buf[M41T80_REG_YEAR ]) +100 ; + +if (clientdata->features &M41T80_FEATURE_CB ) + tm->tm_year += ((buf[M41T80_REG_MON ] &M41T80_CB_MASK ) + >>M41T80_CB_SHIFT ) *100 ; +return 0 ; }
@@ -232,10 +255,13 @@ static int m41t80_rtc_set_time(struct device *dev, struct rtc_time *tm) {struct i2c_client *client =to_i2c_client (dev);struct m41t80_data *clientdata =i2c_get_clientdata (client); +int err, flags, max_year =199 ;unsigned char buf[8 ]; -int err, flags; -if (tm->tm_year <100 || tm->tm_year >199 ) +if (clientdata->features &M41T80_FEATURE_CB ) + max_year =499 ; + +if (tm->tm_year <100 || tm->tm_year > max_year)return -EINVAL ; buf[M41T80_REG_SSEC ] =0 ;
@@ -243,8 +269,14 @@ static int m41t80_rtc_set_time(struct device *dev, struct rtc_time *tm) buf[M41T80_REG_MIN ] =bin2bcd (tm->tm_min); buf[M41T80_REG_HOUR ] =bin2bcd (tm->tm_hour); buf[M41T80_REG_DAY ] =bin2bcd (tm->tm_mday); - buf[M41T80_REG_MON ] =bin2bcd (tm->tm_mon +1 ); - buf[M41T80_REG_YEAR ] =bin2bcd (tm->tm_year -100 ); +if (clientdata->features &M41T80_FEATURE_CB ) { + buf[M41T80_REG_YEAR ] =bin2bcd ((tm->tm_year -100 ) %100 ); + buf[M41T80_REG_MON ] =bin2bcd (tm->tm_mon +1 ) | + (((tm->tm_year -100 ) /100 ) <<M41T80_CB_SHIFT ); + }else { + buf[M41T80_REG_MON ] =bin2bcd (tm->tm_mon +1 ); + buf[M41T80_REG_YEAR ] =bin2bcd (tm->tm_year -100 ); + } buf[M41T80_REG_WDAY ] = tm->tm_wday;/* If the square wave output is controlled in the weekday register */
Signature · 1 line
2.20.1
Hi Alessandro, Alexandre,
Quoted 11 lines
This change adds support for 'century bits' on 4162 family of RTC devices (from ST or microcrystal), which allow storing time beyond year 2099.
For rv4162 century bits - CB1[7]:CB0[6] are stored in reg6 -
0x6(MONTH): CB1 CB00 0 (year 2000 - 2099) 0 1 (year 2100 - 2199) 1 0 (year 2200 - 2299) 1 1 (year 2300 - 2399)
Quoted 6 lines
The driver has been also adjusted to allow setting time up to year 2399 if the
M41T80_FEATURE_CBis set in its DTS/I2C data.There shall be no functional changes for devices not supporting this feature. However, other devices - like m41t80 - have different approaches to handle century information.
Gentle ping on this patch - it has been almost 3 weeks without any reply ...
Thanks in advance.
Quoted 147 lines
Signed-off-by Lukasz Majewski <[email protected]>--- drivers/rtc/rtc-m41t80.c | 56+++++++++++++++++++++++++++++++--------- 1 file changed, 44 insertions(+), 12 deletions(-)
drivers/rtc/rtc-m41t80.c +0
-0@@ -68,9 +68,22 @@#define M41T80_FEATURE_SQ BIT(2)/* Squarewave feature */ #define M41T80_FEATURE_WD BIT(3)/* Extra watchdog resolution */ #define
M41T80_FEATURE_SQ_ALTBIT(4) /*
RSx bits are in reg 4 */ +#defineM41T80_FEATURE_CB
BIT(5) /* Century Bits[CB1:CB0] are in reg 6 */ +drivers/rtc/rtc-m41t80.c +12
-1+/* +* Century bits - CB1[7]:CB0[6] in reg6 (MONTH): +* CB1 CB0 +* 0 0 (year 2000 - 2099) +* 0 1 (year 2100 - 2199) +* 1 0 (year 2200 - 2299) +* 1 1 (year 2300 - 2399) +*/ +#define M41T80_CB_SHIFT 6/* CB[0] bit position */ +#define M41T80_CB_MASK 0xc0/* Century bits mask */ static const struct i2c_device_id m41t80_id[] = { - {"m41t62" ,M41T80_FEATURE_SQ |M41T80_FEATURE_SQ_ALT }, + {"m41t62" ,M41T80_FEATURE_SQ |M41T80_FEATURE_SQ_ALT | +M41T80_FEATURE_CB }, {"m41t65" ,M41T80_FEATURE_HT |M41T80_FEATURE_WD }, {"m41t80" ,M41T80_FEATURE_SQ }, {"m41t81" ,M41T80_FEATURE_HT |M41T80_FEATURE_SQ },@@ -80,7 +93,8 @@ static const struct i2c_device_id m41t80_id[] = { { "m41st84", M41T80_FEATURE_HT | M41T80_FEATURE_BL |
M41T80_FEATURE_SQ}, { "m41st85",M41T80_FEATURE_HT|M41T80_FEATURE_BL|M41T80_FEATURE_SQ}, { "m41st87",M41T80_FEATURE_HT|M41T80_FEATURE_BL|M41T80_FEATURE_SQ},drivers/rtc/rtc-m41t80.c +0
-1- { "rv4162", M41T80_FEATURE_SQ | M41T80_FEATURE_WD |
M41T80_FEATURE_SQ_ALT},drivers/rtc/rtc-m41t80.c +3
-1+ {"rv4162" ,M41T80_FEATURE_SQ |M41T80_FEATURE_WD | + M41T80_FEATURE_SQ_ALT | M41T80_FEATURE_CB}, { } };MODULE_DEVICE_TABLE (i2c, m41t80_id);@@ -88,7 +102,8 @@ MODULE_DEVICE_TABLE(i2c, m41t80_id);static const struct of_device_id m41t80_of_match[] = { { .compatible ="st,m41t62" , - .data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT) + .data = (void *)(M41T80_FEATURE_SQ |
M41T80_FEATURE_SQ_ALT|drivers/rtc/rtc-m41t80.c +2
-1+ M41T80_FEATURE_CB) }, { .compatible = "st,m41t65",@@ -128,16 +143,19 @@ static const struct of_device_id m41t80_of_match[] = { }, { .compatible = "microcrystal,rv4162", - .data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT) + .data = (void *)(M41T80_FEATURE_SQ |
M41T80_FEATURE_WD|drivers/rtc/rtc-m41t80.c +1
-0+ M41T80_FEATURE_SQ_ALT |
M41T80_FEATURE_CB) },drivers/rtc/rtc-m41t80.c +0
-1/* DT compatibility only, do not use compatibles below: */ { .compatible = "st,rv4162", - .data = (void *)(M41T80_FEATURE_SQ |
M41T80_FEATURE_WD|M41T80_FEATURE_SQ_ALT)drivers/rtc/rtc-m41t80.c +1
-0+ .data = (void *)(M41T80_FEATURE_SQ |
M41T80_FEATURE_WD|drivers/rtc/rtc-m41t80.c +1
-0+ M41T80_FEATURE_SQ_ALT |
M41T80_FEATURE_CB) },drivers/rtc/rtc-m41t80.c +0
-1{ .compatible = "rv4162", - .data = (void *)(M41T80_FEATURE_SQ |
M41T80_FEATURE_WD|M41T80_FEATURE_SQ_ALT)drivers/rtc/rtc-m41t80.c +1
-0+ .data = (void *)(M41T80_FEATURE_SQ |
M41T80_FEATURE_WD|drivers/rtc/rtc-m41t80.c +1
-0+ M41T80_FEATURE_SQ_ALT |
M41T80_FEATURE_CB) },drivers/rtc/rtc-m41t80.c +20
-6{ } };@@ -197,6 +215,7 @@ static irqreturn_t m41t80_handle_irq(int irq, void *dev_id) static int m41t80_rtc_read_time(struct device *dev,struct rtc_time *tm) {struct i2c_client *client =to_i2c_client (dev); +struct m41t80_data *clientdata =i2c_get_clientdata (client);unsigned char buf[8 ];int err, flags;@@ -222,9 +241,13 @@ static int m41t80_rtc_read_time(struct device *dev, struct rtc_time *tm) tm->tm_mday = bcd2bin(buf[M41T80_REG_DAY] &0x3f ); tm->tm_wday = buf[M41T80_REG_WDAY ] &0x07 ; tm->tm_mon =bcd2bin (buf[M41T80_REG_MON ] &0x1f ) -1 ; - -/* assume 20YY not 19YY, and ignore the Century Bit */ +/* assume 20YY not 19YY */ tm->tm_year =bcd2bin (buf[M41T80_REG_YEAR ]) +100 ; + +if (clientdata->features &M41T80_FEATURE_CB ) + tm->tm_year += ((buf[M41T80_REG_MON ] &M41T80_CB_MASK ) + >>M41T80_CB_SHIFT ) *100 ; +return 0 ; }@@ -232,10 +255,13 @@ static int m41t80_rtc_set_time(struct device *dev, struct rtc_time *tm) {struct i2c_client *client =to_i2c_client (dev);struct m41t80_data *clientdata =i2c_get_clientdata (client); +int err, flags, max_year =199 ;unsigned char buf[8 ]; -int err, flags; -if (tm->tm_year <100 || tm->tm_year >199 ) +if (clientdata->features &M41T80_FEATURE_CB ) + max_year =499 ; + +if (tm->tm_year <100 || tm->tm_year > max_year)return -EINVAL ; buf[M41T80_REG_SSEC ] =0 ;@@ -243,8 +269,14 @@ static int m41t80_rtc_set_time(struct device *dev, struct rtc_time *tm) buf[M41T80_REG_MIN] = bin2bcd(tm->tm_min); buf[M41T80_REG_HOUR ] =bin2bcd (tm->tm_hour); buf[M41T80_REG_DAY ] =bin2bcd (tm->tm_mday); - buf[M41T80_REG_MON ] =bin2bcd (tm->tm_mon +1 ); - buf[M41T80_REG_YEAR ] =bin2bcd (tm->tm_year -100 ); +if (clientdata->features &M41T80_FEATURE_CB ) { + buf[M41T80_REG_YEAR ] =bin2bcd ((tm->tm_year -100 ) %100 ); + buf[M41T80_REG_MON ] =bin2bcd (tm->tm_mon +1 ) | + (((tm->tm_year -100 ) /100 ) <<M41T80_CB_SHIFT ); + }else { + buf[M41T80_REG_MON ] =bin2bcd (tm->tm_mon +1 ); + buf[M41T80_REG_YEAR ] =bin2bcd (tm->tm_year -100 ); + } buf[M41T80_REG_WDAY ] = tm->tm_wday;
Quoted 2 lines
/* If the square wave output is controlled in the weekday
register */
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: [email protected]
Alexandre Belloni
maintainerHello,
Quoted 10 lines · Lukasz Majewski
This change adds support for 'century bits' on 4162 family of RTC devices (from ST or microcrystal), which allow storing time beyond year 2099.
For rv4162 century bits - CB1[7]:CB0[6] are stored in reg6 -
0x6(MONTH):
CB1 CB00 0 (year 2000 - 2099) 0 1 (year 2100 - 2199) 1 0 (year 2200 - 2299) 1 1 (year 2300 - 2399)
Quoted 7 lines
The driver has been also adjusted to allow setting time up to year 2399 if the
M41T80_FEATURE_CBis set in its DTS/I2C data.There shall be no functional changes for devices not supporting this feature. However, other devices - like m41t80 - have different approaches to handle century information.
This does not work because the RTC doesn't handle leap years on century properly. This means that if you do that, then there is no guarantee the date will be the correct after 2099. As far as the m41t62 and rv4162 are concerned, there is no way to make the century bits useful.
See the datasheet:
"During any year which is a multiple of 4, the RV-4162 RTC will automatically insert leap day, February 29. Therefore, the application software must correct for this during the exception years (2100, 2200, etc.) as noted above."
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Hi Alexandre,
Quoted 22 lines
Hello,
Quoted 11 lines · Lukasz Majewski
This change adds support for 'century bits' on 4162 family of RTC devices (from ST or microcrystal), which allow storing time beyond year 2099.
For rv4162 century bits - CB1[7]:CB0[6] are stored in reg6 -
0x6(MONTH): CB1 CB00 0 (year 2000 - 2099) 0 1 (year 2100 - 2199) 1 0 (year 2200 - 2299) 1 1 (year 2300 - 2399)Quoted 7 lines
The driver has been also adjusted to allow setting time up to year 2399 if the
M41T80_FEATURE_CBis set in its DTS/I2C data.There shall be no functional changes for devices not supporting this feature. However, other devices - like m41t80 - have different approaches to handle century information.
Quoted 5 lines
This does not work because the RTC doesn't handle leap years on century properly. This means that if you do that, then there is no guarantee the date will be the correct after 2099. As far as the m41t62 and rv4162 are concerned, there is no way to make the century bits useful.
The code as is now doesn't allow to setup dates after year 2100. In my application - I do some tests which depend on setting this time.
Quoted 7 lines
See the datasheet:
"During any year which is a multiple of 4, the RV-4162 RTC will automatically insert leap day, February 29. Therefore, the application software must correct for this during the exception years (2100, 2200, etc.) as noted above."
I'm wondering what the phrase "application software" means here?
If it is the userland SW, then we shall at least be able to set 2099 in this device and then count on software correction.
If the "application software" is the kernel driver - the date correction shall be done there (maybe some lookup table?).
Personally, I do prefer the first option - this means that with this patch we can set the time to e.g. 2234 year and then rely on userland software (or libc) to do the correction.
Quoted 1 line
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: [email protected]
Alexandre Belloni
maintainerQuoted 13 lines · Lukasz Majewski
Quoted 7 lines
See the datasheet:
"During any year which is a multiple of 4, the RV-4162 RTC will automatically insert leap day, February 29. Therefore, the application software must correct for this during the exception years (2100, 2200, etc.) as noted above."
I'm wondering what the phrase "application software" means here?
If it is the userland SW, then we shall at least be able to set 2099 in this device and then count on software correction.
Quoted 7 lines
If the "application software" is the kernel driver - the date correction shall be done there (maybe some lookup table?).
Personally, I do prefer the first option - this means that with this patch we can set the time to e.g. 2234 year and then rely on userland software (or libc) to do the correction.
It is not possible to ensure this correction is properly done in software, there is no point in letting the user set those bits.
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Hi Alexandre,
Quoted 17 lines · Lukasz Majewski
Quoted 16 lines
Quoted 7 lines
See the datasheet:
"During any year which is a multiple of 4, the RV-4162 RTC will automatically insert leap day, February 29. Therefore, the application software must correct for this during the exception years (2100, 2200, etc.) as noted above."
I'm wondering what the phrase "application software" means here?
If it is the userland SW, then we shall at least be able to set 2099 in this device and then count on software correction.
If the "application software" is the kernel driver - the date correction shall be done there (maybe some lookup table?).
Quoted 9 lines
Quoted 4 lines
Personally, I do prefer the first option - this means that with this patch we can set the time to e.g. 2234 year and then rely on userland software (or libc) to do the correction.
It is not possible to ensure this correction is properly done in software, there is no point in letting the user set those bits.
I see your point.
However, could you share your idea on testing setting RTC time to year 2100 on this particular IC (by using hctosys and friends)?
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: [email protected]
Alexandre Belloni
maintainerQuoted 29 lines · Lukasz Majewski
Hi Alexandre,
Quoted 17 lines · Lukasz Majewski
Quoted 16 lines
Quoted 7 lines
See the datasheet:
"During any year which is a multiple of 4, the RV-4162 RTC will automatically insert leap day, February 29. Therefore, the application software must correct for this during the exception years (2100, 2200, etc.) as noted above."
I'm wondering what the phrase "application software" means here?
If it is the userland SW, then we shall at least be able to set 2099 in this device and then count on software correction.
If the "application software" is the kernel driver - the date correction shall be done there (maybe some lookup table?).
Quoted 9 lines
Quoted 4 lines
Personally, I do prefer the first option - this means that with this patch we can set the time to e.g. 2234 year and then rely on userland software (or libc) to do the correction.
It is not possible to ensure this correction is properly done in software, there is no point in letting the user set those bits.
Quoted 5 lines
I see your point.
However, could you share your idea on testing setting RTC time to year 2100 on this particular IC (by using hctosys and friends)?
You can use rtc from
https://git.kernel.org/pub/scm/linux/kernel/git/abelloni/rtc-tools.git/
You can also use rtc-range with your patch to observe that it fails in 2100.
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Hi Alexandre,
Quoted 20 lines · Lukasz Majewski
Quoted 19 lines
Hi Alexandre,
Quoted 17 lines · Lukasz Majewski
Quoted 16 lines
Quoted 7 lines
See the datasheet:
"During any year which is a multiple of 4, the RV-4162 RTC will automatically insert leap day, February 29. Therefore, the application software must correct for this during the exception years (2100, 2200, etc.) as noted above."
I'm wondering what the phrase "application software" means here?
If it is the userland SW, then we shall at least be able to set 2099 in this device and then count on software correction.
If the "application software" is the kernel driver - the date correction shall be done there (maybe some lookup table?).
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 4 lines
Personally, I do prefer the first option - this means that with this patch we can set the time to e.g. 2234 year and then rely on userland software (or libc) to do the correction.
It is not possible to ensure this correction is properly done in software, there is no point in letting the user set those bits.
Sorry, but I do see some inconsistency here.
The application note [1] says that the correction shall be done in application SW.
The rtc-range.c program [2] sets and reads the time via ioctl (e.g. RTC_SET_TIME, RTC_RD_TIME).
To pass your tests one needs to do the correction in linux kernel driver for drivers/rtc/rtc-m41t80.c.
Please correct me if I'm wrong, but IMHO it shall be enough to adjust 2100, 2200, 2300, years in this driver (the submitted patch shall be adjusted to support it - I can prepare proper v2).
Quoted 9 lines
Quoted 8 lines
Quoted 2 lines
I see your point.
However, could you share your idea on testing setting RTC time to year 2100 on this particular IC (by using hctosys and friends)?
Quoted 5 lines
You can use rtc from
https://git.kernel.org/pub/scm/linux/kernel/git/abelloni/rtc-tools.git/You can also use rtc-range with your patch to observe that it fails in 2100.
Thanks for sharing useful links.
Quoted 1 line
Note:
[1] -
https://www.microcrystal.com/fileadmin/Media/Products/RTC/App.Manual/RV-4162-C7_App-Manual.pdf
(point 4.5 and 4.6).
[2] -
https://git.kernel.org/pub/scm/linux/kernel/git/abelloni/rtc-tools.git/tree/rtc-range.c
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: [email protected]
Alexandre Belloni
maintainerQuoted 8 lines · Lukasz Majewski
Sorry, but I do see some inconsistency here.
The application note [1] says that the correction shall be done in application SW.
The
rtc-range.cprogram [2] sets and reads the time via ioctl (e.g.RTC_SET_TIME,RTC_RD_TIME).
Quoted 7 lines
To pass your tests one needs to do the correction in linux kernel driver for
drivers/rtc/rtc-m41t80.c.Please correct me if I'm wrong, but IMHO it shall be enough to adjust 2100, 2200, 2300, years in this driver (the submitted patch shall be adjusted to support it - I can prepare proper v2).
There is no way you will be able to know when to adjust the date because Linux may or may not be running when the boundary is crossed.
The only useful range for an RTC is its fully contiguous range. If it needs software to run to support an extended range, it can't be used in the context of Linux.
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Hi Alexandre,
Quoted 12 lines · Lukasz Majewski
Quoted 11 lines
Sorry, but I do see some inconsistency here.
The application note [1] says that the correction shall be done in application SW.
The
rtc-range.cprogram [2] sets and reads the time via ioctl (e.g.RTC_SET_TIME,RTC_RD_TIME).To pass your tests one needs to do the correction in linux kernel driver for
drivers/rtc/rtc-m41t80.c.
Quoted 8 lines
Quoted 4 lines
Please correct me if I'm wrong, but IMHO it shall be enough to adjust 2100, 2200, 2300, years in this driver (the submitted patch shall be adjusted to support it - I can prepare proper v2).
There is no way you will be able to know when to adjust the date because Linux may or may not be running when the boundary is crossed.
I'm rather thinking about following use cases:
I. Adjusting time:
1. I start with time < 01.01.2099
2. I issue ioctl to set the time to e.g. 2100
- When driver receives such request I setup century bits
- and also perform in kernel driver time correction (and store corrected time in RTC)
3. Subsequent reads from rtc use century bits to provide the time (after year 2100). Century bits are set, so the correction may be performed if needed.
II. The system is started at year 2098 and is supposed to run for e.g. 3 years:
1. The time is read from the rtc - the "passing" of centuries need to be detected.
From the documentation [1] (point 4.5):
"The two century bits, CB1 and CB0, are bits 7 and 6, respectively, in the Month / Century register at address 06h. Together, they comprise a 2 - bit counter which increments at the turn of each century. CB1 is the most significant bit."
If those bits increment when we pass century boundaries, we can detect this fact and correct time when ioctl is issued.
Quoted 1 line
The only useful range for an RTC is its fully contiguous range.
Does the automatic increment of century bits count to "contiguous range" ?
Quoted 4 lines
If it
needs software to run to support an extended range, it can't be used in the context of Linux.
[1] -
https://www.microcrystal.com/fileadmin/Media/Products/RTC/App.Manual/RV-4162-C7_App-Manual.pdf
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: [email protected]
Alexandre Belloni
maintainerQuoted 27 lines · Lukasz Majewski
Hi Alexandre,
I'm rather thinking about following use cases:I. Adjusting time:
1. I start with time < 01.01.2099
2. I issue ioctl to set the time to e.g. 2100
- When driver receives such request I setup century bits
- and also perform in kernel driver time correction (and store corrected time in RTC)
3. Subsequent reads from rtc use century bits to provide the time (after year 2100). Century bits are set, so the correction may be performed if needed.
II. The system is started at year 2098 and is supposed to run for e.g. 3 years:
1. The time is read from the rtc - the "passing" of centuries need to be detected.
From the documentation [1] (point 4.5):
Quoted 8 lines
"The two century bits, CB1 and CB0, are bits 7 and 6, respectively, in the Month / Century register at address 06h. Together, they comprise a 2 - bit counter which increments at the turn of each century. CB1 is the most significant bit."
If those bits increment when we pass century boundaries, we can detect this fact and correct time when ioctl is issued.
No, you can't because you simply don't know if you still need to correct the time or if you already did it the last time the system was started.
Example:
Date is set to 2100-02-28, some time pass, the rtc now thinks it is 2100-02-29. You correct it to 2100-03-01, fine.
Now, date is set to 2100-02-28, the system is shutdown, some time pass, it starts on 2100-03-02, the rtc thinks 2100-03-01 you can't correct it because you can't know whether a day has been missed.
Quoted 5 lines
Quoted 1 line
The only useful range for an RTC is its fully contiguous range.
Does the automatic increment of century bits count to "contiguous range" ?
No, because of the leap day issue.
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com