Skip to contentSkip to conversation

qemu-doc: Remove paragraph about requiring a HD image with -kernel

PATCH Applied Thomas Huth 5 participants 5 messages Oct 1, 2019 – Oct 21, 2019

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 qemu-doc: Remove paragraph about requiring a HD image with -kernel

The need for specifying "-hda" together with "-kernel" has been removed in commit 57a46d057995 ("Convert linux bootrom to external rom and fw_cfg"), almost 10 years ago, so let's remove this description from our documentation now, too.

---
 qemu-doc.texi | 4 ----
 1 file changed, 4 deletions(-)
qemu-doc.texi +0 -4
index 2ba6c90c08..3c5022050f 100644
@@ -906,10 +906,6 @@ Use @option{-kernel} to provide the Linux kernel image and
 @option{-append} to give the kernel command line arguments. The
 @option{-initrd} option can be used to provide an INITRD image.
 
-When using the direct Linux boot, a disk image for the first hard disk
-@file{hda} is required because its boot sector is used to launch the
-Linux kernel.
-
 If you do not need graphical output, you can disable it and redirect
 the virtual serial port and the QEMU monitor to the console with the
 @option{-nographic} option. The typical command line is:
Signature · 1 line
2.18.1
Reviewed-by on v1 1/1
#1 lore raw
Quoted 9 lines · Thomas Huth

The need for specifying "-hda" together with "-kernel" has been removed in commit 57a46d057995 ("Convert linux bootrom to external rom and fw_cfg"), almost 10 years ago, so let's remove this description from our documentation now, too.

---
 qemu-doc.texi | 4 ----
 1 file changed, 4 deletions(-)

Regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
Reviewed-by on v1 1/1
#2 lore raw
In reply to Thomas Huth
Quoted 9 lines · Thomas Huth

The need for specifying "-hda" together with "-kernel" has been removed in commit 57a46d057995 ("Convert linux bootrom to external rom and fw_cfg"), almost 10 years ago, so let's remove this description from our documentation now, too.

---
 qemu-doc.texi | 4 ----
 1 file changed, 4 deletions(-)

Thanks,
Stefano

Quoted 20 lines
qemu-doc.texi +0 -4
index 2ba6c90c08..3c5022050f 100644
@@ -906,10 +906,6 @@ Use @option{-kernel} to provide the Linux kernel image and
 @option{-append} to give the kernel command line arguments. The
 @option{-initrd} option can be used to provide an INITRD image.
 
-When using the direct Linux boot, a disk image for the first hard disk
-@file{hda} is required because its boot sector is used to launch the
-Linux kernel.
-
 If you do not need graphical output, you can disable it and redirect
 the virtual serial port and the QEMU monitor to the console with the
 @option{-nographic} option. The typical command line is:
Signature · 1 line
2.18.1
Reviewed-by on v1 1/1
#3 lore raw
In reply to Thomas Huth
Quoted 16 lines · Thomas Huth

The need for specifying "-hda" together with "-kernel" has been removed in commit 57a46d057995 ("Convert linux bootrom to external rom and fw_cfg"), almost 10 years ago, so let's remove this description from our documentation now, too.

---
 qemu-doc.texi | 4 ----
 1 file changed, 4 deletions(-)
qemu-doc.texi +0 -0
index 2ba6c90c08..3c5022050f 100644

qemu-doc.texi Use @option{-kernel} to provide the Linux kernel image and · line 911

Quoted 10 lines
qemu-doc.texi +0 -4
@@ -906,10 +906,6 @@ Use @option{-kernel} to provide the Linux kernel image and
 @option{-append} to give the kernel command line arguments. The
 @option{-initrd} option can be used to provide an INITRD image.
 
-When using the direct Linux boot, a disk image for the first hard disk
-@file{hda} is required because its boot sector is used to launch the
-Linux kernel.
-
 If you do not need graphical output, you can disable it and redirect
 the virtual serial port and the QEMU monitor to the console with the
 @option{-nographic} option. The typical command line is:
#4 lore raw
In reply to Thomas Huth

Le 01/10/2019 à 13:01, Thomas Huth a écrit :

Quoted 16 lines

The need for specifying "-hda" together with "-kernel" has been removed in commit 57a46d057995 ("Convert linux bootrom to external rom and fw_cfg"), almost 10 years ago, so let's remove this description from our documentation now, too.

---
 qemu-doc.texi | 4 ----
 1 file changed, 4 deletions(-)
qemu-doc.texi +0 -0
index 2ba6c90c08..3c5022050f 100644

qemu-doc.texi Use @option{-kernel} to provide the Linux kernel image and · line 911

Quoted 10 lines
qemu-doc.texi +0 -4
@@ -906,10 +906,6 @@ Use @option{-kernel} to provide the Linux kernel image and
 @option{-append} to give the kernel command line arguments. The
 @option{-initrd} option can be used to provide an INITRD image.
 
-When using the direct Linux boot, a disk image for the first hard disk
-@file{hda} is required because its boot sector is used to launch the
-Linux kernel.
-
 If you do not need graphical output, you can disable it and redirect
 the virtual serial port and the QEMU monitor to the console with the
 @option{-nographic} option. The typical command line is:

Applied to my trivial-patches branch.

Thanks,
Laurent