dt-bindings: timer: Convert Exynos MCT bindings to json-schema
Krzysztof Kozlowski
maintainerPATCH v5 1/2 dt-bindings: timer: Convert Exynos MCT bindings to json-schema
Convert Samsung Exynos Soc Multi Core Timer bindings to DT schema format using json-schema.
---
Changes since v4:
1. Do not mention interrupts-extended in the bindings (old bindings mentioned only interrupts).
Changes since v3:
1. Use interrupts-extended instead of interrupts-map in example.
Changes since v1:
1. Indent example with four spaces (more readable),
2. Rename nodes in example to timer,
3. Remove mct-map subnode.
--- .../bindings/timer/samsung,exynos4210-mct.txt | 88 -------------- .../timer/samsung,exynos4210-mct.yaml | 107 ++++++++++++++++++ 2 files changed, 107 insertions(+), 88 deletions(-) delete mode 100644 Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt create mode 100644 Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt deleted +0 -88
@@ -1,88 +0,0 @@ -Samsung's Multi Core Timer (MCT) - -The Samsung's Multi Core Timer (MCT) module includes two main blocks, the -global timer and CPU local timers. The global timer is a 64-bit free running -up-counter and can generate 4 interrupts when the counter reaches one of the -four preset counter values. The CPU local timers are 32-bit free running -down-counters and generate an interrupt when the counter expires. There is -one CPU local timer instantiated in MCT for every CPU in the system. - -Required properties: - -- compatible: should be "samsung,exynos4210-mct". - (a) "samsung,exynos4210-mct", for mct compatible with Exynos4210 mct. - (b) "samsung,exynos4412-mct", for mct compatible with Exynos4412 mct. - -- reg: base address of the mct controller and length of the address space - it occupies. - -- interrupts: the list of interrupts generated by the controller. The following - should be the order of the interrupts specified. The local timer interrupts - should be specified after the four global timer interrupts have been - specified. - - 0: Global Timer Interrupt 0 - 1: Global Timer Interrupt 1 - 2: Global Timer Interrupt 2 - 3: Global Timer Interrupt 3 - 4: Local Timer Interrupt 0 - 5: Local Timer Interrupt 1 - 6: .. - 7: .. - i: Local Timer Interrupt n - - For MCT block that uses a per-processor interrupt for local timers, such - as ones compatible with "samsung,exynos4412-mct", only one local timer - interrupt might be specified, meaning that all local timers use the same - per processor interrupt. - -Example 1: In this example, the IP contains two local timers, using separate - interrupts, so two local timer interrupts have been specified, - in addition to four global timer interrupts. - - mct@10050000 { - compatible = "samsung,exynos4210-mct"; - reg = <0x10050000 0x800>; - interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>, - <0 42 0>, <0 48 0>; - }; - -Example 2: In this example, the timer interrupts are connected to two separate - interrupt controllers. Hence, an interrupt-map is created to map - the interrupts to the respective interrupt controllers. - - mct@101c0000 { - compatible = "samsung,exynos4210-mct"; - reg = <0x101C0000 0x800>; - interrupt-parent = <&mct_map>; - interrupts = <0>, <1>, <2>, <3>, <4>, <5>; - - mct_map: mct-map { - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0 &gic 0 57 0>, - <1 &gic 0 69 0>, - <2 &combiner 12 6>, - <3 &combiner 12 7>, - <4 &gic 0 42 0>, - <5 &gic 0 48 0>; - }; - }; - -Example 3: In this example, the IP contains four local timers, but using - a per-processor interrupt to handle them. Either all the local - timer interrupts can be specified, with the same interrupt specifier - value or just the first one. - - mct@10050000 { - compatible = "samsung,exynos4412-mct"; - reg = <0x10050000 0x800>; - - /* Both ways are possible in this case. Either: */ - interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>, - <0 42 0>; - /* or: */ - interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>, - <0 42 0>, <0 42 0>, <0 42 0>, <0 42 0>; - };
Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml new file +107 -0
107 lines not on this page · raw message
Signature · 1 line
2.17.1
Krzysztof Kozlowski
maintainerPATCH v5 2/2 dt-bindings: timer: Use defines instead of numbers in Exynos MCT examples
Make the examples in Exynos Multi Core Timer bindings more readable and bring them closer to real DTS by using defines for interrupt flags. Fix also GIC interrupt type in example for Exynos4412 (from SPI to PPI).
---
Changes since v1:
1. Use GIC_PPI where applicable.
Rebased on top of:
https://patchwork.kernel.org/project/linux-samsung-soc/list/?series=177667&state=*
--- .../timer/samsung,exynos4210-mct.yaml | 37 ++++++++++++++----- 1 file changed, 27 insertions(+), 10 deletions(-)
Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml +27 -10
@@ -57,51 +57,68 @@ examples: // In this example, the IP contains two local timers, using separate // interrupts, so two local timer interrupts have been specified, // in addition to four global timer interrupts. + #include <dt-bindings/interrupt-controller/arm-gic.h> timer@10050000 { compatible = "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; - interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>, - <0 42 0>, <0 48 0>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; }; - | // In this example, the timer interrupts are connected to two separate // interrupt controllers. Hence, an interrupts-extended is needed. + #include <dt-bindings/interrupt-controller/arm-gic.h> timer@101c0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; - interrupts-extended = <&gic 0 57 0>, - <&gic 0 69 0>, + interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, <&combiner 12 6>, <&combiner 12 7>, - <&gic 0 42 0>, - <&gic 0 48 0>; + <&gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; }; - | // In this example, the IP contains four local timers, but using // a per-processor interrupt to handle them. Only one first local // interrupt is specified. + #include <dt-bindings/interrupt-controller/arm-gic.h> timer@10050000 { compatible = "samsung,exynos4412-mct"; reg = <0x10050000 0x800>; - interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>, - <0 42 0>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 42 IRQ_TYPE_LEVEL_HIGH>; }; - | // In this example, the IP contains four local timers, but using // a per-processor interrupt to handle them. All the local timer // interrupts are specified. + #include <dt-bindings/interrupt-controller/arm-gic.h> timer@10050000 { compatible = "samsung,exynos4412-mct"; reg = <0x10050000 0x800>; - interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>, - <0 42 0>, <0 42 0>, <0 42 0>, <0 42 0>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 42 IRQ_TYPE_LEVEL_HIGH>; };
Signature · 1 line
2.17.1
Re: [PATCH v5 2/2] dt-bindings: timer: Use defines instead of numbers in Exynos MCT examples
Quoted 9 lines · Krzysztof Kozlowski
Make the examples in Exynos Multi Core Timer bindings more readable and bring them closer to real DTS by using defines for interrupt flags. Fix also GIC interrupt type in example for Exynos4412 (from SPI to PPI).
Suggested-by Marek Szyprowski <[email protected]>Signed-off-by Krzysztof Kozlowski <[email protected]>---
Quoted 9 lines
Changes since v1:
1. UseGIC_PPIwhere applicable.Rebased on top of:
https://patchwork.kernel.org/project/linux-samsung-soc/list/?series=177667&state=*--- .../timer/samsung,exynos4210-mct.yaml | 37 ++++++++++++++----- 1 file changed, 27 insertions(+), 10 deletions(-)
Applied, thanks.
Rob
Quoted 18 lines · Krzysztof Kozlowski
Convert Samsung Exynos Soc Multi Core Timer bindings to DT schema format using json-schema.
Signed-off-by Krzysztof Kozlowski <[email protected]>---
Changes since v4:
1. Do not mention interrupts-extended in the bindings (old bindings mentioned only interrupts).Changes since v3:
1. Use interrupts-extended instead of interrupts-map in example.Changes since v1:
1. Indent example with four spaces (more readable),
2. Rename nodes in example to timer,
3. Remove mct-map subnode.
Quoted 7 lines
--- .../bindings/timer/samsung,exynos4210-mct.txt | 88 -------------- .../timer/samsung,exynos4210-mct.yaml | 107 ++++++++++++++++++ 2 files changed, 107 insertions(+), 88 deletions(-) delete mode 100644 Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt create mode 100644 Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
Applied, thanks.
Rob