Skip to contentSkip to conversation

iio: pressure: bmp280: code shrink

PATCH In review Bartosz Golaszewski 3 participants 13 messages Oct 2, 2019 – Oct 22, 2019 IIO

lore
Share & tools
lore
#0 lore raw

cover iio: pressure: bmp280: code shrink

From: Bartosz Golaszewski <[email protected]>

This series contains a couple changes that shrink the driver both in terms of LOC as well as actual generated code.

Bartosz Golaszewski (4):
iio: pressure: bmp280: use bulk regulator ops
iio: pressure: bmp280: use devm_iio_device_register()
iio: pressure: bmp280: remove stray newline
iio: pressure: bmp280: use devm action and remove labels from probe

 drivers/iio/pressure/bmp280-core.c | 114 +++++++++++++----------------
 drivers/iio/pressure/bmp280-i2c.c  |   6 --
 drivers/iio/pressure/bmp280-spi.c  |   6 --
 drivers/iio/pressure/bmp280.h      |   1 -
 4 files changed, 51 insertions(+), 76 deletions(-)
Signature · 1 line
2.23.0
#1 lore raw

PATCH 1/4 iio: pressure: bmp280: use bulk regulator ops

From: Bartosz Golaszewski <[email protected]>

The vddd and vdda supplies are always operated on together. We can shrink the code a bit by using the bulk regulator helpers.

---
 drivers/iio/pressure/bmp280-core.c | 69 +++++++++++++-----------------
 1 file changed, 30 insertions(+), 39 deletions(-)
drivers/iio/pressure/bmp280-core.c +30 -39
index 8d0f15f27dc5..c21f8ce7b09c 100644
@@ -74,6 +74,12 @@ struct bmp280_calib {
 	s8  H6;
 };
 
+static const char *const bmp280_supply_names[] = {
+	"vddd", "vdda"
+};
+
+#define BMP280_NUM_SUPPLIES ARRAY_SIZE(bmp280_supply_names)
+
 struct bmp280_data {
 	struct device *dev;
 	struct mutex lock;
@@ -85,8 +91,7 @@ struct bmp280_data {
 		struct bmp180_calib bmp180;
 		struct bmp280_calib bmp280;
 	} calib;
-	struct regulator *vddd;
-	struct regulator *vdda;
+	struct regulator_bulk_data supplies[BMP280_NUM_SUPPLIES];
 	unsigned int start_up_time; /* in microseconds */
 
 	/* log of base 2 of oversampling rate */
@@ -1033,27 +1038,23 @@ int bmp280_common_probe(struct device *dev,
 	}
 
 	/* Bring up regulators */
-	data->vddd = devm_regulator_get(dev, "vddd");
-	if (IS_ERR(data->vddd)) {
-		dev_err(dev, "failed to get VDDD regulator\n");
-		return PTR_ERR(data->vddd);
-	}
-	ret = regulator_enable(data->vddd);
+	regulator_bulk_set_supply_names(data->supplies,
+					bmp280_supply_names,
+					BMP280_NUM_SUPPLIES);
+
+	ret = devm_regulator_bulk_get(dev,
+				      BMP280_NUM_SUPPLIES, data->supplies);
 	if (ret) {
-		dev_err(dev, "failed to enable VDDD regulator\n");
+		dev_err(dev, "failed to get regulators\n");
 		return ret;
 	}
-	data->vdda = devm_regulator_get(dev, "vdda");
-	if (IS_ERR(data->vdda)) {
-		dev_err(dev, "failed to get VDDA regulator\n");
-		ret = PTR_ERR(data->vdda);
-		goto out_disable_vddd;
-	}
-	ret = regulator_enable(data->vdda);
+
+	ret = regulator_bulk_enable(BMP280_NUM_SUPPLIES, data->supplies);
 	if (ret) {
-		dev_err(dev, "failed to enable VDDA regulator\n");
-		goto out_disable_vddd;
+		dev_err(dev, "failed to enable regulators\n");
+		return ret;
 	}
+
 	/* Wait to make sure we started up properly */
 	usleep_range(data->start_up_time, data->start_up_time + 100);
 
@@ -1068,17 +1069,17 @@ int bmp280_common_probe(struct device *dev,
 	data->regmap = regmap;
 	ret = regmap_read(regmap, BMP280_REG_ID, &chip_id);
 	if (ret < 0)
-		goto out_disable_vdda;
+		goto out_disable_regulators;
 	if (chip_id != chip) {
 		dev_err(dev, "bad chip id: expected %x got %x\n",
 			chip, chip_id);
 		ret = -EINVAL;
-		goto out_disable_vdda;
+		goto out_disable_regulators;
 	}
 
 	ret = data->chip_info->chip_config(data);
 	if (ret < 0)
-		goto out_disable_vdda;
+		goto out_disable_regulators;
 
 	dev_set_drvdata(dev, indio_dev);
 
@@ -1092,14 +1093,14 @@ int bmp280_common_probe(struct device *dev,
 		if (ret < 0) {
 			dev_err(data->dev,
 				"failed to read calibration coefficients\n");
-			goto out_disable_vdda;
+			goto out_disable_regulators;
 		}
 	} else if (chip_id == BMP280_CHIP_ID || chip_id == BME280_CHIP_ID) {
 		ret = bmp280_read_calib(data, &data->calib.bmp280, chip_id);
 		if (ret < 0) {
 			dev_err(data->dev,
 				"failed to read calibration coefficients\n");
-			goto out_disable_vdda;
+			goto out_disable_regulators;
 		}
 	}
 
@@ -1111,7 +1112,7 @@ int bmp280_common_probe(struct device *dev,
 	if (irq > 0 || (chip_id  == BMP180_CHIP_ID)) {
 		ret = bmp085_fetch_eoc_irq(dev, name, irq, data);
 		if (ret)
-			goto out_disable_vdda;
+			goto out_disable_regulators;
 	}
 
 	/* Enable runtime PM */
@@ -1137,10 +1138,8 @@ int bmp280_common_probe(struct device *dev,
 	pm_runtime_get_sync(data->dev);
 	pm_runtime_put_noidle(data->dev);
 	pm_runtime_disable(data->dev);
-out_disable_vdda:
-	regulator_disable(data->vdda);
-out_disable_vddd:
-	regulator_disable(data->vddd);
+out_disable_regulators:
+	regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
 	return ret;
 }
 EXPORT_SYMBOL(bmp280_common_probe);
@@ -1154,8 +1153,7 @@ int bmp280_common_remove(struct device *dev)
 	pm_runtime_get_sync(data->dev);
 	pm_runtime_put_noidle(data->dev);
 	pm_runtime_disable(data->dev);
-	regulator_disable(data->vdda);
-	regulator_disable(data->vddd);
+	regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
 	return 0;
 }
 EXPORT_SYMBOL(bmp280_common_remove);
@@ -1165,12 +1163,8 @@ static int bmp280_runtime_suspend(struct device *dev)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct bmp280_data *data = iio_priv(indio_dev);
-	int ret;
 
-	ret = regulator_disable(data->vdda);
-	if (ret)
-		return ret;
-	return regulator_disable(data->vddd);
+	return regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
 }
 
 static int bmp280_runtime_resume(struct device *dev)
@@ -1179,10 +1173,7 @@ static int bmp280_runtime_resume(struct device *dev)
 	struct bmp280_data *data = iio_priv(indio_dev);
 	int ret;
 
-	ret = regulator_enable(data->vddd);
-	if (ret)
-		return ret;
-	ret = regulator_enable(data->vdda);
+	ret = regulator_bulk_enable(BMP280_NUM_SUPPLIES, data->supplies);
 	if (ret)
 		return ret;
 	usleep_range(data->start_up_time, data->start_up_time + 100);
Signature · 1 line
2.23.0
#2 lore raw

Re: [PATCH 1/4] iio: pressure: bmp280: use bulk regulator ops

I love your patch! Yet something to improve:

Hi Bartosz,

I love your patch! Yet something to improve:

[auto build test ERROR on iio/togreg]
[cannot apply to v5.4-rc1 next-20191002]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system. BTW, we also suggest to use '--base' option to specify the base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/Bartosz-Golaszewski/iio-pressure-bmp280-code-shrink/20191002-194508
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg
config: sh-allmodconfig (attached as .config)
compiler: sh4-linux-gcc (GCC) 7.4.0

reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
GCC_VERSION=7.4.0 make.cross ARCH=sh

If you fix the issue, kindly add following tag

All errors (new ones prefixed by >>):

drivers/iio/pressure/bmp280-core.c: In function 'bmp280_common_probe':

>> drivers/iio/pressure/bmp280-core.c:1041:2: error: implicit declaration of function 'regulator_bulk_set_supply_names'; did you mean 'regulator_bulk_register_supply_alias'? [-Werror=implicit-function-declaration]
     regulator_bulk_set_supply_names(data->supplies,
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     regulator_bulk_register_supply_alias

cc1: some warnings being treated as errors

vim +1041 drivers/iio/pressure/bmp280-core.c

986
987 int bmp280_common_probe(struct device *dev,
988 struct regmap *regmap,
989 unsigned int chip,
990 const char *name,
991 int irq)
992 {
993 int ret;
994 struct iio_dev *indio_dev;
995 struct bmp280_data *data;
996 unsigned int chip_id;
997 struct gpio_desc *gpiod;
998
999 indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
1000 if (!indio_dev)
1001 return -ENOMEM;
1002
1003 data = iio_priv(indio_dev);
1004 mutex_init(&data->lock);
1005 data->dev = dev;
1006
1007 indio_dev->dev.parent = dev;
1008 indio_dev->name = name;
1009 indio_dev->channels = bmp280_channels;
1010 indio_dev->info = &bmp280_info;
1011 indio_dev->modes = INDIO_DIRECT_MODE;
1012
1013 switch (chip) {
1014 case BMP180_CHIP_ID:
1015 indio_dev->num_channels = 2;
1016 data->chip_info = &bmp180_chip_info;
1017 data->oversampling_press = ilog2(8);
1018 data->oversampling_temp = ilog2(1);
1019 data->start_up_time = 10000;
1020 break;
1021 case BMP280_CHIP_ID:
1022 indio_dev->num_channels = 2;
1023 data->chip_info = &bmp280_chip_info;
1024 data->oversampling_press = ilog2(16);
1025 data->oversampling_temp = ilog2(2);
1026 data->start_up_time = 2000;
1027 break;
1028 case BME280_CHIP_ID:
1029 indio_dev->num_channels = 3;
1030 data->chip_info = &bme280_chip_info;
1031 data->oversampling_press = ilog2(16);
1032 data->oversampling_humid = ilog2(16);
1033 data->oversampling_temp = ilog2(2);
1034 data->start_up_time = 2000;
1035 break;
1036 default:
1037 return -EINVAL;
1038 }
1039
1040 /* Bring up regulators */

> 1041		regulator_bulk_set_supply_names(data->supplies,

1042 bmp280_supply_names,
1043 BMP280_NUM_SUPPLIES);
1044
1045 ret = devm_regulator_bulk_get(dev,
1046 BMP280_NUM_SUPPLIES, data->supplies);
1047 if (ret) {
1048 dev_err(dev, "failed to get regulators\n");
1049 return ret;
1050 }
1051
1052 ret = regulator_bulk_enable(BMP280_NUM_SUPPLIES, data->supplies);
1053 if (ret) {
1054 dev_err(dev, "failed to enable regulators\n");
1055 return ret;
1056 }
1057
1058 /* Wait to make sure we started up properly */
1059 usleep_range(data->start_up_time, data->start_up_time + 100);
1060
1061 /* Bring chip out of reset if there is an assigned GPIO line */
1062 gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
1063 /* Deassert the signal */
1064 if (!IS_ERR(gpiod)) {
1065 dev_info(dev, "release reset\n");
1066 gpiod_set_value(gpiod, 0);
1067 }
1068
1069 data->regmap = regmap;
1070 ret = regmap_read(regmap, BMP280_REG_ID, &chip_id);
1071 if (ret < 0)
1072 goto out_disable_regulators;
1073 if (chip_id != chip) {
1074 dev_err(dev, "bad chip id: expected %x got %x\n",
1075 chip, chip_id);
1076 ret = -EINVAL;
1077 goto out_disable_regulators;
1078 }
1079
1080 ret = data->chip_info->chip_config(data);
1081 if (ret < 0)
1082 goto out_disable_regulators;
1083
1084 dev_set_drvdata(dev, indio_dev);
1085
1086 /*
1087 * Some chips have calibration parameters "programmed into the devices'
1088 * non-volatile memory during production". Let's read them out@probe
1089 * time once. They will not change.
1090 */
1091 if (chip_id == BMP180_CHIP_ID) {
1092 ret = bmp180_read_calib(data, &data->calib.bmp180);
1093 if (ret < 0) {
1094 dev_err(data->dev,
1095 "failed to read calibration coefficients\n");
1096 goto out_disable_regulators;
1097 }
1098 } else if (chip_id == BMP280_CHIP_ID || chip_id == BME280_CHIP_ID) {
1099 ret = bmp280_read_calib(data, &data->calib.bmp280, chip_id);
1100 if (ret < 0) {
1101 dev_err(data->dev,
1102 "failed to read calibration coefficients\n");
1103 goto out_disable_regulators;
1104 }
1105 }
1106
1107 /*
1108 * Attempt to grab an optional EOC IRQ - only the BMP085 has this
1109 * however as it happens, the BMP085 shares the chip ID of BMP180
1110 * so we look for an IRQ if we have that.
1111 */
1112 if (irq > 0 || (chip_id == BMP180_CHIP_ID)) {
1113 ret = bmp085_fetch_eoc_irq(dev, name, irq, data);
1114 if (ret)
1115 goto out_disable_regulators;
1116 }
1117
1118 /* Enable runtime PM */
1119 pm_runtime_get_noresume(dev);
1120 pm_runtime_set_active(dev);
1121 pm_runtime_enable(dev);
1122 /*
1123 * Set autosuspend to two orders of magnitude larger than the
1124 * start-up time.
1125 */
1126 pm_runtime_set_autosuspend_delay(dev, data->start_up_time / 10);
1127 pm_runtime_use_autosuspend(dev);
1128 pm_runtime_put(dev);
1129
1130 ret = iio_device_register(indio_dev);
1131 if (ret)
1132 goto out_runtime_pm_disable;
1133
1134
1135 return 0;
1136
1137 out_runtime_pm_disable:
1138 pm_runtime_get_sync(data->dev);
1139 pm_runtime_put_noidle(data->dev);
1140 pm_runtime_disable(data->dev);
1141 out_disable_regulators:
1142 regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
1143 return ret;
1144 }
1145 EXPORT_SYMBOL(bmp280_common_probe);
1146

---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation

#3 lore raw

Re: [PATCH 1/4] iio: pressure: bmp280: use bulk regulator ops

śr., 2 paź 2019 o 15:06 kbuild test robot <[email protected]> napisał(a):

Quoted 24 lines

Hi Bartosz,

I love your patch! Yet something to improve:

[auto build test ERROR on iio/togreg]
[cannot apply to v5.4-rc1 next-20191002]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system. BTW, we also suggest to use '--base' option to specify the base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/Bartosz-Golaszewski/iio-pressure-bmp280-code-shrink/20191002-194508
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg
config: sh-allmodconfig (attached as .config)
compiler: sh4-linux-gcc (GCC) 7.4.0

reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
GCC_VERSION=7.4.0 make.cross ARCH=sh

If you fix the issue, kindly add following tag

Quoted 9 lines

All errors (new ones prefixed by >>):

drivers/iio/pressure/bmp280-core.c: In function 'bmp280_common_probe':

Quoted 1 line
Quoted 1 line

drivers/iio/pressure/bmp280-core.c:1041:2: error: implicit declaration of function 'regulator_bulk_set_supply_names'; did you mean 'regulator_bulk_register_supply_alias'? [-Werror=implicit-function-declaration]

     regulator_bulk_set_supply_names(data->supplies,
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     regulator_bulk_register_supply_alias

cc1: some warnings being treated as errors

This function has been introduced in commit d0087e72710c ("regulator:
provide regulator_bulk_set_supply_names()") and released in v5.4-rc1 but it's not present in this tree. In other words: a false positive.

Bart

Quoted 167 lines

vim +1041 drivers/iio/pressure/bmp280-core.c

   986
   987  int bmp280_common_probe(struct device *dev,
   988                          struct regmap *regmap,
   989                          unsigned int chip,
   990                          const char *name,
   991                          int irq)
   992  {
   993          int ret;
   994          struct iio_dev *indio_dev;
   995          struct bmp280_data *data;
   996          unsigned int chip_id;
   997          struct gpio_desc *gpiod;
   998
   999          indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
  1000          if (!indio_dev)
  1001                  return -ENOMEM;
  1002
  1003          data = iio_priv(indio_dev);
  1004          mutex_init(&data->lock);
  1005          data->dev = dev;
  1006
  1007          indio_dev->dev.parent = dev;
  1008          indio_dev->name = name;
  1009          indio_dev->channels = bmp280_channels;
  1010          indio_dev->info = &bmp280_info;
  1011          indio_dev->modes = INDIO_DIRECT_MODE;
  1012
  1013          switch (chip) {
  1014          case BMP180_CHIP_ID:
  1015                  indio_dev->num_channels = 2;
  1016                  data->chip_info = &bmp180_chip_info;
  1017                  data->oversampling_press = ilog2(8);
  1018                  data->oversampling_temp = ilog2(1);
  1019                  data->start_up_time = 10000;
  1020                  break;
  1021          case BMP280_CHIP_ID:
  1022                  indio_dev->num_channels = 2;
  1023                  data->chip_info = &bmp280_chip_info;
  1024                  data->oversampling_press = ilog2(16);
  1025                  data->oversampling_temp = ilog2(2);
  1026                  data->start_up_time = 2000;
  1027                  break;
  1028          case BME280_CHIP_ID:
  1029                  indio_dev->num_channels = 3;
  1030                  data->chip_info = &bme280_chip_info;
  1031                  data->oversampling_press = ilog2(16);
  1032                  data->oversampling_humid = ilog2(16);
  1033                  data->oversampling_temp = ilog2(2);
  1034                  data->start_up_time = 2000;
  1035                  break;

1036 default:
1037 return -EINVAL;
1038 }
1039
1040 /* Bring up regulators */

Quoted 1 line

1041 regulator_bulk_set_supply_names(data->supplies,

1042 bmp280_supply_names,
1043 BMP280_NUM_SUPPLIES);
1044
1045 ret = devm_regulator_bulk_get(dev,
1046 BMP280_NUM_SUPPLIES, data->supplies);
1047 if (ret) {
1048 dev_err(dev, "failed to get regulators\n");
1049 return ret;
1050 }
1051
1052 ret = regulator_bulk_enable(BMP280_NUM_SUPPLIES, data->supplies);
1053 if (ret) {
1054 dev_err(dev, "failed to enable regulators\n");
1055 return ret;
1056 }
1057
1058 /* Wait to make sure we started up properly */
1059 usleep_range(data->start_up_time, data->start_up_time + 100);
1060

  1061          /* Bring chip out of reset if there is an assigned GPIO line */
  1062          gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
  1063          /* Deassert the signal */
  1064          if (!IS_ERR(gpiod)) {
  1065                  dev_info(dev, "release reset\n");
  1066                  gpiod_set_value(gpiod, 0);
  1067          }
  1068
  1069          data->regmap = regmap;
  1070          ret = regmap_read(regmap, BMP280_REG_ID, &chip_id);
  1071          if (ret < 0)
  1072                  goto out_disable_regulators;
  1073          if (chip_id != chip) {
  1074                  dev_err(dev, "bad chip id: expected %x got %x\n",
  1075                          chip, chip_id);
  1076                  ret = -EINVAL;
  1077                  goto out_disable_regulators;
  1078          }
  1079
  1080          ret = data->chip_info->chip_config(data);
  1081          if (ret < 0)
  1082                  goto out_disable_regulators;
  1083
  1084          dev_set_drvdata(dev, indio_dev);
  1085
  1086          /*
  1087           * Some chips have calibration parameters "programmed into the devices'
  1088           * non-volatile memory during production". Let's read them out at probe
  1089           * time once. They will not change.
  1090           */
  1091          if (chip_id  == BMP180_CHIP_ID) {
  1092                  ret = bmp180_read_calib(data, &data->calib.bmp180);
  1093                  if (ret < 0) {
  1094                          dev_err(data->dev,
  1095                                  "failed to read calibration coefficients\n");
  1096                          goto out_disable_regulators;
  1097                  }
  1098          } else if (chip_id == BMP280_CHIP_ID || chip_id == BME280_CHIP_ID) {
  1099                  ret = bmp280_read_calib(data, &data->calib.bmp280, chip_id);
  1100                  if (ret < 0) {
  1101                          dev_err(data->dev,
  1102                                  "failed to read calibration coefficients\n");
  1103                          goto out_disable_regulators;
  1104                  }
  1105          }
  1106
  1107          /*
  1108           * Attempt to grab an optional EOC IRQ - only the BMP085 has this
  1109           * however as it happens, the BMP085 shares the chip ID of BMP180
  1110           * so we look for an IRQ if we have that.
  1111           */
  1112          if (irq > 0 || (chip_id  == BMP180_CHIP_ID)) {
  1113                  ret = bmp085_fetch_eoc_irq(dev, name, irq, data);
  1114                  if (ret)
  1115                          goto out_disable_regulators;
  1116          }
  1117
  1118          /* Enable runtime PM */
  1119          pm_runtime_get_noresume(dev);
  1120          pm_runtime_set_active(dev);
  1121          pm_runtime_enable(dev);
  1122          /*
  1123           * Set autosuspend to two orders of magnitude larger than the
  1124           * start-up time.
  1125           */
  1126          pm_runtime_set_autosuspend_delay(dev, data->start_up_time / 10);
  1127          pm_runtime_use_autosuspend(dev);
  1128          pm_runtime_put(dev);
  1129
  1130          ret = iio_device_register(indio_dev);
  1131          if (ret)
  1132                  goto out_runtime_pm_disable;
  1133
  1134
  1135          return 0;
  1136
  1137  out_runtime_pm_disable:
  1138          pm_runtime_get_sync(data->dev);
  1139          pm_runtime_put_noidle(data->dev);
  1140          pm_runtime_disable(data->dev);

1141 out_disable_regulators:
1142 regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
1143 return ret;
1144 }
1145 EXPORT_SYMBOL(bmp280_common_probe);
1146

---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation

maintainer
#4 lore raw

Re: [PATCH 1/4] iio: pressure: bmp280: use bulk regulator ops

Quoted 35 lines · On Wed, 2 Oct 2019 17:57:30 +0200 Bartosz Golaszewski <[email protected]> wrote:

śr., 2 paź 2019 o 15:06 kbuild test robot <[email protected]> napisał(a):

Quoted 24 lines

Hi Bartosz,

I love your patch! Yet something to improve:

[auto build test ERROR on iio/togreg]
[cannot apply to v5.4-rc1 next-20191002]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system. BTW, we also suggest to use '--base' option to specify the base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/Bartosz-Golaszewski/iio-pressure-bmp280-code-shrink/20191002-194508
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg
config: sh-allmodconfig (attached as .config)
compiler: sh4-linux-gcc (GCC) 7.4.0

reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
GCC_VERSION=7.4.0 make.cross ARCH=sh

If you fix the issue, kindly add following tag

Quoted 9 lines

All errors (new ones prefixed by >>):

drivers/iio/pressure/bmp280-core.c: In function 'bmp280_common_probe':

Quoted 1 line
Quoted 1 line

drivers/iio/pressure/bmp280-core.c:1041:2: error: implicit declaration of function 'regulator_bulk_set_supply_names'; did you mean 'regulator_bulk_register_supply_alias'? [-Werror=implicit-function-declaration]

     regulator_bulk_set_supply_names(data->supplies,
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     regulator_bulk_register_supply_alias

cc1: some warnings being treated as errors

Quoted 3 lines

This function has been introduced in commit d0087e72710c ("regulator:
provide regulator_bulk_set_supply_names()") and released in v5.4-rc1 but it's not present in this tree. In other words: a false positive.

Kind of handy to known though ;) My tree doesn't contain it yet either. That should be fixed later this week after a pull request and rebase. I'll not be applying this series until after that.

Thanks,

Jonathan

Quoted 170 lines

Bart

Quoted 167 lines

vim +1041 drivers/iio/pressure/bmp280-core.c

   986
   987  int bmp280_common_probe(struct device *dev,
   988                          struct regmap *regmap,
   989                          unsigned int chip,
   990                          const char *name,
   991                          int irq)
   992  {
   993          int ret;
   994          struct iio_dev *indio_dev;
   995          struct bmp280_data *data;
   996          unsigned int chip_id;
   997          struct gpio_desc *gpiod;
   998
   999          indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
  1000          if (!indio_dev)
  1001                  return -ENOMEM;
  1002
  1003          data = iio_priv(indio_dev);
  1004          mutex_init(&data->lock);
  1005          data->dev = dev;
  1006
  1007          indio_dev->dev.parent = dev;
  1008          indio_dev->name = name;
  1009          indio_dev->channels = bmp280_channels;
  1010          indio_dev->info = &bmp280_info;
  1011          indio_dev->modes = INDIO_DIRECT_MODE;
  1012
  1013          switch (chip) {
  1014          case BMP180_CHIP_ID:
  1015                  indio_dev->num_channels = 2;
  1016                  data->chip_info = &bmp180_chip_info;
  1017                  data->oversampling_press = ilog2(8);
  1018                  data->oversampling_temp = ilog2(1);
  1019                  data->start_up_time = 10000;
  1020                  break;
  1021          case BMP280_CHIP_ID:
  1022                  indio_dev->num_channels = 2;
  1023                  data->chip_info = &bmp280_chip_info;
  1024                  data->oversampling_press = ilog2(16);
  1025                  data->oversampling_temp = ilog2(2);
  1026                  data->start_up_time = 2000;
  1027                  break;
  1028          case BME280_CHIP_ID:
  1029                  indio_dev->num_channels = 3;
  1030                  data->chip_info = &bme280_chip_info;
  1031                  data->oversampling_press = ilog2(16);
  1032                  data->oversampling_humid = ilog2(16);
  1033                  data->oversampling_temp = ilog2(2);
  1034                  data->start_up_time = 2000;
  1035                  break;

1036 default:
1037 return -EINVAL;
1038 }
1039
1040 /* Bring up regulators */

Quoted 1 line

1041 regulator_bulk_set_supply_names(data->supplies,

1042 bmp280_supply_names,
1043 BMP280_NUM_SUPPLIES);
1044
1045 ret = devm_regulator_bulk_get(dev,
1046 BMP280_NUM_SUPPLIES, data->supplies);
1047 if (ret) {
1048 dev_err(dev, "failed to get regulators\n");
1049 return ret;
1050 }
1051
1052 ret = regulator_bulk_enable(BMP280_NUM_SUPPLIES, data->supplies);
1053 if (ret) {
1054 dev_err(dev, "failed to enable regulators\n");
1055 return ret;
1056 }
1057
1058 /* Wait to make sure we started up properly */
1059 usleep_range(data->start_up_time, data->start_up_time + 100);
1060

  1061          /* Bring chip out of reset if there is an assigned GPIO line */
  1062          gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
  1063          /* Deassert the signal */
  1064          if (!IS_ERR(gpiod)) {
  1065                  dev_info(dev, "release reset\n");
  1066                  gpiod_set_value(gpiod, 0);
  1067          }
  1068
  1069          data->regmap = regmap;
  1070          ret = regmap_read(regmap, BMP280_REG_ID, &chip_id);
  1071          if (ret < 0)
  1072                  goto out_disable_regulators;
  1073          if (chip_id != chip) {
  1074                  dev_err(dev, "bad chip id: expected %x got %x\n",
  1075                          chip, chip_id);
  1076                  ret = -EINVAL;
  1077                  goto out_disable_regulators;
  1078          }
  1079
  1080          ret = data->chip_info->chip_config(data);
  1081          if (ret < 0)
  1082                  goto out_disable_regulators;
  1083
  1084          dev_set_drvdata(dev, indio_dev);
  1085
  1086          /*
  1087           * Some chips have calibration parameters "programmed into the devices'
  1088           * non-volatile memory during production". Let's read them out at probe
  1089           * time once. They will not change.
  1090           */
  1091          if (chip_id  == BMP180_CHIP_ID) {
  1092                  ret = bmp180_read_calib(data, &data->calib.bmp180);
  1093                  if (ret < 0) {
  1094                          dev_err(data->dev,
  1095                                  "failed to read calibration coefficients\n");
  1096                          goto out_disable_regulators;
  1097                  }
  1098          } else if (chip_id == BMP280_CHIP_ID || chip_id == BME280_CHIP_ID) {
  1099                  ret = bmp280_read_calib(data, &data->calib.bmp280, chip_id);
  1100                  if (ret < 0) {
  1101                          dev_err(data->dev,
  1102                                  "failed to read calibration coefficients\n");
  1103                          goto out_disable_regulators;
  1104                  }
  1105          }
  1106
  1107          /*
  1108           * Attempt to grab an optional EOC IRQ - only the BMP085 has this
  1109           * however as it happens, the BMP085 shares the chip ID of BMP180
  1110           * so we look for an IRQ if we have that.
  1111           */
  1112          if (irq > 0 || (chip_id  == BMP180_CHIP_ID)) {
  1113                  ret = bmp085_fetch_eoc_irq(dev, name, irq, data);
  1114                  if (ret)
  1115                          goto out_disable_regulators;
  1116          }
  1117
  1118          /* Enable runtime PM */
  1119          pm_runtime_get_noresume(dev);
  1120          pm_runtime_set_active(dev);
  1121          pm_runtime_enable(dev);
  1122          /*
  1123           * Set autosuspend to two orders of magnitude larger than the
  1124           * start-up time.
  1125           */
  1126          pm_runtime_set_autosuspend_delay(dev, data->start_up_time / 10);
  1127          pm_runtime_use_autosuspend(dev);
  1128          pm_runtime_put(dev);
  1129
  1130          ret = iio_device_register(indio_dev);
  1131          if (ret)
  1132                  goto out_runtime_pm_disable;
  1133
  1134
  1135          return 0;
  1136
  1137  out_runtime_pm_disable:
  1138          pm_runtime_get_sync(data->dev);
  1139          pm_runtime_put_noidle(data->dev);
  1140          pm_runtime_disable(data->dev);

1141 out_disable_regulators:
1142 regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
1143 return ret;
1144 }
1145 EXPORT_SYMBOL(bmp280_common_probe);
1146

---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation

maintainer
#5 lore raw

Re: [PATCH 1/4] iio: pressure: bmp280: use bulk regulator ops

Quoted 38 lines · On Sun, 6 Oct 2019 10:49:18 +0100 Jonathan Cameron <[email protected]> wrote:
Quoted 35 lines · On Wed, 2 Oct 2019 17:57:30 +0200 Bartosz Golaszewski <[email protected]> wrote:

śr., 2 paź 2019 o 15:06 kbuild test robot <[email protected]> napisał(a):

Quoted 33 lines

Hi Bartosz,

I love your patch! Yet something to improve:

[auto build test ERROR on iio/togreg]
[cannot apply to v5.4-rc1 next-20191002]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system. BTW, we also suggest to use '--base' option to specify the base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/Bartosz-Golaszewski/iio-pressure-bmp280-code-shrink/20191002-194508
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg
config: sh-allmodconfig (attached as .config)
compiler: sh4-linux-gcc (GCC) 7.4.0

reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
GCC_VERSION=7.4.0 make.cross ARCH=sh

If you fix the issue, kindly add following tag

All errors (new ones prefixed by >>):

drivers/iio/pressure/bmp280-core.c: In function 'bmp280_common_probe':

Quoted 1 line
Quoted 1 line

drivers/iio/pressure/bmp280-core.c:1041:2: error: implicit declaration of function 'regulator_bulk_set_supply_names'; did you mean 'regulator_bulk_register_supply_alias'? [-Werror=implicit-function-declaration]

     regulator_bulk_set_supply_names(data->supplies,
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     regulator_bulk_register_supply_alias

cc1: some warnings being treated as errors

Quoted 6 lines
Quoted 3 lines

This function has been introduced in commit d0087e72710c ("regulator:
provide regulator_bulk_set_supply_names()") and released in v5.4-rc1 but it's not present in this tree. In other words: a false positive.

Kind of handy to known though ;) My tree doesn't contain it yet either. That should be fixed later this week after a pull request and rebase. I'll not be applying this series until after that.

Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it.

Thanks,

Jonathan

Quoted 176 lines

Thanks,

Jonathan

Quoted 170 lines

Bart

Quoted 167 lines

vim +1041 drivers/iio/pressure/bmp280-core.c

   986
   987  int bmp280_common_probe(struct device *dev,
   988                          struct regmap *regmap,
   989                          unsigned int chip,
   990                          const char *name,
   991                          int irq)
   992  {
   993          int ret;
   994          struct iio_dev *indio_dev;
   995          struct bmp280_data *data;
   996          unsigned int chip_id;
   997          struct gpio_desc *gpiod;
   998
   999          indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
  1000          if (!indio_dev)
  1001                  return -ENOMEM;
  1002
  1003          data = iio_priv(indio_dev);
  1004          mutex_init(&data->lock);
  1005          data->dev = dev;
  1006
  1007          indio_dev->dev.parent = dev;
  1008          indio_dev->name = name;
  1009          indio_dev->channels = bmp280_channels;
  1010          indio_dev->info = &bmp280_info;
  1011          indio_dev->modes = INDIO_DIRECT_MODE;
  1012
  1013          switch (chip) {
  1014          case BMP180_CHIP_ID:
  1015                  indio_dev->num_channels = 2;
  1016                  data->chip_info = &bmp180_chip_info;
  1017                  data->oversampling_press = ilog2(8);
  1018                  data->oversampling_temp = ilog2(1);
  1019                  data->start_up_time = 10000;
  1020                  break;
  1021          case BMP280_CHIP_ID:
  1022                  indio_dev->num_channels = 2;
  1023                  data->chip_info = &bmp280_chip_info;
  1024                  data->oversampling_press = ilog2(16);
  1025                  data->oversampling_temp = ilog2(2);
  1026                  data->start_up_time = 2000;
  1027                  break;
  1028          case BME280_CHIP_ID:
  1029                  indio_dev->num_channels = 3;
  1030                  data->chip_info = &bme280_chip_info;
  1031                  data->oversampling_press = ilog2(16);
  1032                  data->oversampling_humid = ilog2(16);
  1033                  data->oversampling_temp = ilog2(2);
  1034                  data->start_up_time = 2000;
  1035                  break;

1036 default:
1037 return -EINVAL;
1038 }
1039
1040 /* Bring up regulators */

Quoted 1 line

1041 regulator_bulk_set_supply_names(data->supplies,

1042 bmp280_supply_names,
1043 BMP280_NUM_SUPPLIES);
1044
1045 ret = devm_regulator_bulk_get(dev,
1046 BMP280_NUM_SUPPLIES, data->supplies);
1047 if (ret) {
1048 dev_err(dev, "failed to get regulators\n");
1049 return ret;
1050 }
1051
1052 ret = regulator_bulk_enable(BMP280_NUM_SUPPLIES, data->supplies);
1053 if (ret) {
1054 dev_err(dev, "failed to enable regulators\n");
1055 return ret;
1056 }
1057
1058 /* Wait to make sure we started up properly */
1059 usleep_range(data->start_up_time, data->start_up_time + 100);
1060

  1061          /* Bring chip out of reset if there is an assigned GPIO line */
  1062          gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
  1063          /* Deassert the signal */
  1064          if (!IS_ERR(gpiod)) {
  1065                  dev_info(dev, "release reset\n");
  1066                  gpiod_set_value(gpiod, 0);
  1067          }
  1068
  1069          data->regmap = regmap;
  1070          ret = regmap_read(regmap, BMP280_REG_ID, &chip_id);
  1071          if (ret < 0)
  1072                  goto out_disable_regulators;
  1073          if (chip_id != chip) {
  1074                  dev_err(dev, "bad chip id: expected %x got %x\n",
  1075                          chip, chip_id);
  1076                  ret = -EINVAL;
  1077                  goto out_disable_regulators;
  1078          }
  1079
  1080          ret = data->chip_info->chip_config(data);
  1081          if (ret < 0)
  1082                  goto out_disable_regulators;
  1083
  1084          dev_set_drvdata(dev, indio_dev);
  1085
  1086          /*
  1087           * Some chips have calibration parameters "programmed into the devices'
  1088           * non-volatile memory during production". Let's read them out at probe
  1089           * time once. They will not change.
  1090           */
  1091          if (chip_id  == BMP180_CHIP_ID) {
  1092                  ret = bmp180_read_calib(data, &data->calib.bmp180);
  1093                  if (ret < 0) {
  1094                          dev_err(data->dev,
  1095                                  "failed to read calibration coefficients\n");
  1096                          goto out_disable_regulators;
  1097                  }
  1098          } else if (chip_id == BMP280_CHIP_ID || chip_id == BME280_CHIP_ID) {
  1099                  ret = bmp280_read_calib(data, &data->calib.bmp280, chip_id);
  1100                  if (ret < 0) {
  1101                          dev_err(data->dev,
  1102                                  "failed to read calibration coefficients\n");
  1103                          goto out_disable_regulators;
  1104                  }
  1105          }
  1106
  1107          /*
  1108           * Attempt to grab an optional EOC IRQ - only the BMP085 has this
  1109           * however as it happens, the BMP085 shares the chip ID of BMP180
  1110           * so we look for an IRQ if we have that.
  1111           */
  1112          if (irq > 0 || (chip_id  == BMP180_CHIP_ID)) {
  1113                  ret = bmp085_fetch_eoc_irq(dev, name, irq, data);
  1114                  if (ret)
  1115                          goto out_disable_regulators;
  1116          }
  1117
  1118          /* Enable runtime PM */
  1119          pm_runtime_get_noresume(dev);
  1120          pm_runtime_set_active(dev);
  1121          pm_runtime_enable(dev);
  1122          /*
  1123           * Set autosuspend to two orders of magnitude larger than the
  1124           * start-up time.
  1125           */
  1126          pm_runtime_set_autosuspend_delay(dev, data->start_up_time / 10);
  1127          pm_runtime_use_autosuspend(dev);
  1128          pm_runtime_put(dev);
  1129
  1130          ret = iio_device_register(indio_dev);
  1131          if (ret)
  1132                  goto out_runtime_pm_disable;
  1133
  1134
  1135          return 0;
  1136
  1137  out_runtime_pm_disable:
  1138          pm_runtime_get_sync(data->dev);
  1139          pm_runtime_put_noidle(data->dev);
  1140          pm_runtime_disable(data->dev);

1141 out_disable_regulators:
1142 regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
1143 return ret;
1144 }
1145 EXPORT_SYMBOL(bmp280_common_probe);
1146

---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation

maintainer
#6 lore raw

Re: [PATCH 1/4] iio: pressure: bmp280: use bulk regulator ops

In reply to Bartosz Golaszewski
Quoted 6 lines · On Wed, 2 Oct 2019 10:57:56 +0200 Bartosz Golaszewski <[email protected]> wrote:

From: Bartosz Golaszewski <[email protected]>

The vddd and vdda supplies are always operated on together. We can shrink the code a bit by using the bulk regulator helpers.

Looks good. Will pick up once I have the precursors in my branch.

Thanks,

Jonathan

Quoted 167 lines
---
 drivers/iio/pressure/bmp280-core.c | 69 +++++++++++++-----------------
 1 file changed, 30 insertions(+), 39 deletions(-)
drivers/iio/pressure/bmp280-core.c +30 -39
index 8d0f15f27dc5..c21f8ce7b09c 100644
@@ -74,6 +74,12 @@ struct bmp280_calib {
 	s8  H6;
 };
 
+static const char *const bmp280_supply_names[] = {
+	"vddd", "vdda"
+};
+
+#define BMP280_NUM_SUPPLIES ARRAY_SIZE(bmp280_supply_names)
+
 struct bmp280_data {
 	struct device *dev;
 	struct mutex lock;
@@ -85,8 +91,7 @@ struct bmp280_data {
 		struct bmp180_calib bmp180;
 		struct bmp280_calib bmp280;
 	} calib;
-	struct regulator *vddd;
-	struct regulator *vdda;
+	struct regulator_bulk_data supplies[BMP280_NUM_SUPPLIES];
 	unsigned int start_up_time; /* in microseconds */
 
 	/* log of base 2 of oversampling rate */
@@ -1033,27 +1038,23 @@ int bmp280_common_probe(struct device *dev,
 	}
 
 	/* Bring up regulators */
-	data->vddd = devm_regulator_get(dev, "vddd");
-	if (IS_ERR(data->vddd)) {
-		dev_err(dev, "failed to get VDDD regulator\n");
-		return PTR_ERR(data->vddd);
-	}
-	ret = regulator_enable(data->vddd);
+	regulator_bulk_set_supply_names(data->supplies,
+					bmp280_supply_names,
+					BMP280_NUM_SUPPLIES);
+
+	ret = devm_regulator_bulk_get(dev,
+				      BMP280_NUM_SUPPLIES, data->supplies);
 	if (ret) {
-		dev_err(dev, "failed to enable VDDD regulator\n");
+		dev_err(dev, "failed to get regulators\n");
 		return ret;
 	}
-	data->vdda = devm_regulator_get(dev, "vdda");
-	if (IS_ERR(data->vdda)) {
-		dev_err(dev, "failed to get VDDA regulator\n");
-		ret = PTR_ERR(data->vdda);
-		goto out_disable_vddd;
-	}
-	ret = regulator_enable(data->vdda);
+
+	ret = regulator_bulk_enable(BMP280_NUM_SUPPLIES, data->supplies);
 	if (ret) {
-		dev_err(dev, "failed to enable VDDA regulator\n");
-		goto out_disable_vddd;
+		dev_err(dev, "failed to enable regulators\n");
+		return ret;
 	}
+
 	/* Wait to make sure we started up properly */
 	usleep_range(data->start_up_time, data->start_up_time + 100);
 
@@ -1068,17 +1069,17 @@ int bmp280_common_probe(struct device *dev,
 	data->regmap = regmap;
 	ret = regmap_read(regmap, BMP280_REG_ID, &chip_id);
 	if (ret < 0)
-		goto out_disable_vdda;
+		goto out_disable_regulators;
 	if (chip_id != chip) {
 		dev_err(dev, "bad chip id: expected %x got %x\n",
 			chip, chip_id);
 		ret = -EINVAL;
-		goto out_disable_vdda;
+		goto out_disable_regulators;
 	}
 
 	ret = data->chip_info->chip_config(data);
 	if (ret < 0)
-		goto out_disable_vdda;
+		goto out_disable_regulators;
 
 	dev_set_drvdata(dev, indio_dev);
 
@@ -1092,14 +1093,14 @@ int bmp280_common_probe(struct device *dev,
 		if (ret < 0) {
 			dev_err(data->dev,
 				"failed to read calibration coefficients\n");
-			goto out_disable_vdda;
+			goto out_disable_regulators;
 		}
 	} else if (chip_id == BMP280_CHIP_ID || chip_id == BME280_CHIP_ID) {
 		ret = bmp280_read_calib(data, &data->calib.bmp280, chip_id);
 		if (ret < 0) {
 			dev_err(data->dev,
 				"failed to read calibration coefficients\n");
-			goto out_disable_vdda;
+			goto out_disable_regulators;
 		}
 	}
 
@@ -1111,7 +1112,7 @@ int bmp280_common_probe(struct device *dev,
 	if (irq > 0 || (chip_id  == BMP180_CHIP_ID)) {
 		ret = bmp085_fetch_eoc_irq(dev, name, irq, data);
 		if (ret)
-			goto out_disable_vdda;
+			goto out_disable_regulators;
 	}
 
 	/* Enable runtime PM */
@@ -1137,10 +1138,8 @@ int bmp280_common_probe(struct device *dev,
 	pm_runtime_get_sync(data->dev);
 	pm_runtime_put_noidle(data->dev);
 	pm_runtime_disable(data->dev);
-out_disable_vdda:
-	regulator_disable(data->vdda);
-out_disable_vddd:
-	regulator_disable(data->vddd);
+out_disable_regulators:
+	regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
 	return ret;
 }
 EXPORT_SYMBOL(bmp280_common_probe);
@@ -1154,8 +1153,7 @@ int bmp280_common_remove(struct device *dev)
 	pm_runtime_get_sync(data->dev);
 	pm_runtime_put_noidle(data->dev);
 	pm_runtime_disable(data->dev);
-	regulator_disable(data->vdda);
-	regulator_disable(data->vddd);
+	regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
 	return 0;
 }
 EXPORT_SYMBOL(bmp280_common_remove);
@@ -1165,12 +1163,8 @@ static int bmp280_runtime_suspend(struct device *dev)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct bmp280_data *data = iio_priv(indio_dev);
-	int ret;
 
-	ret = regulator_disable(data->vdda);
-	if (ret)
-		return ret;
-	return regulator_disable(data->vddd);
+	return regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
 }
 
 static int bmp280_runtime_resume(struct device *dev)
@@ -1179,10 +1173,7 @@ static int bmp280_runtime_resume(struct device *dev)
 	struct bmp280_data *data = iio_priv(indio_dev);
 	int ret;
 
-	ret = regulator_enable(data->vddd);
-	if (ret)
-		return ret;
-	ret = regulator_enable(data->vdda);
+	ret = regulator_bulk_enable(BMP280_NUM_SUPPLIES, data->supplies);
 	if (ret)
 		return ret;
 	usleep_range(data->start_up_time, data->start_up_time + 100);
#7 lore raw

PATCH 2/4 iio: pressure: bmp280: use devm_iio_device_register()

In reply to Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

We can use the managed variant of iio_device_register() and remove the corresponding unregister operation from the remove callback.

---
 drivers/iio/pressure/bmp280-core.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/iio/pressure/bmp280-core.c +1 -2
index c21f8ce7b09c..f22400e1e98f 100644
@@ -1127,7 +1127,7 @@ int bmp280_common_probe(struct device *dev,
 	pm_runtime_use_autosuspend(dev);
 	pm_runtime_put(dev);
 
-	ret = iio_device_register(indio_dev);
+	ret = devm_iio_device_register(dev, indio_dev);
 	if (ret)
 		goto out_runtime_pm_disable;
 
@@ -1149,7 +1149,6 @@ int bmp280_common_remove(struct device *dev)
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct bmp280_data *data = iio_priv(indio_dev);
 
-	iio_device_unregister(indio_dev);
 	pm_runtime_get_sync(data->dev);
 	pm_runtime_put_noidle(data->dev);
 	pm_runtime_disable(data->dev);
Signature · 1 line
2.23.0
maintainer
#8 lore raw

Re: [PATCH 2/4] iio: pressure: bmp280: use devm_iio_device_register()

Quoted 6 lines · On Wed, 2 Oct 2019 10:57:57 +0200 Bartosz Golaszewski <[email protected]> wrote:

From: Bartosz Golaszewski <[email protected]>

We can use the managed variant of iio_device_register() and remove the corresponding unregister operation from the remove callback.

This results in a race where the regulators are powered down before we remove the userspace interfaces. All sorts of fun can therefore occur...

If we fix that with some devm_add_action_or_reset fun then there is still the fact that we loose the 'obviously correct' property of the remove being a mirror of the probe because the ordering wrt to runtime_pm is different.

So I'd leave this one alone.

Thanks,

Jonathan

Quoted 25 lines
---
 drivers/iio/pressure/bmp280-core.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/iio/pressure/bmp280-core.c +1 -2
index c21f8ce7b09c..f22400e1e98f 100644
@@ -1127,7 +1127,7 @@ int bmp280_common_probe(struct device *dev,
 	pm_runtime_use_autosuspend(dev);
 	pm_runtime_put(dev);
 
-	ret = iio_device_register(indio_dev);
+	ret = devm_iio_device_register(dev, indio_dev);
 	if (ret)
 		goto out_runtime_pm_disable;
 
@@ -1149,7 +1149,6 @@ int bmp280_common_remove(struct device *dev)
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct bmp280_data *data = iio_priv(indio_dev);
 
-	iio_device_unregister(indio_dev);
 	pm_runtime_get_sync(data->dev);
 	pm_runtime_put_noidle(data->dev);
 	pm_runtime_disable(data->dev);
#9 lore raw

PATCH 3/4 iio: pressure: bmp280: remove stray newline

In reply to Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

Remove a stray newline from the probe callback.

---
 drivers/iio/pressure/bmp280-core.c | 1 -
 1 file changed, 1 deletion(-)
drivers/iio/pressure/bmp280-core.c +0 -1
index f22400e1e98f..fdbd3bc27921 100644
@@ -1131,7 +1131,6 @@ int bmp280_common_probe(struct device *dev,
 	if (ret)
 		goto out_runtime_pm_disable;
 
-
 	return 0;
 
 out_runtime_pm_disable:
Signature · 1 line
2.23.0
maintainer
#10 lore raw

Re: [PATCH 3/4] iio: pressure: bmp280: remove stray newline

Quoted 5 lines · On Wed, 2 Oct 2019 10:57:58 +0200 Bartosz Golaszewski <[email protected]> wrote:

From: Bartosz Golaszewski <[email protected]>

Remove a stray newline from the probe callback.

Applied to the togreg branch of iio.git and pushed out as testing for no particular reason (well for the other patches in that tree ;)

Thanks,

Jonathan

Quoted 16 lines
---
 drivers/iio/pressure/bmp280-core.c | 1 -
 1 file changed, 1 deletion(-)
drivers/iio/pressure/bmp280-core.c +0 -1
index f22400e1e98f..fdbd3bc27921 100644
@@ -1131,7 +1131,6 @@ int bmp280_common_probe(struct device *dev,
 	if (ret)
 		goto out_runtime_pm_disable;
 
-
 	return 0;
 
 out_runtime_pm_disable:
#11 lore raw

PATCH 4/4 iio: pressure: bmp280: use devm action and remove labels from probe

In reply to Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

We can drop some duplicate code if we use devm_action for disabling regulators and pm. This allows us to completely remove all remove() callbacks from both i2c and spi code.

---
 drivers/iio/pressure/bmp280-core.c | 61 +++++++++++++++---------------
 drivers/iio/pressure/bmp280-i2c.c  |  6 ---
 drivers/iio/pressure/bmp280-spi.c  |  6 ---
 drivers/iio/pressure/bmp280.h      |  1 -
 4 files changed, 30 insertions(+), 44 deletions(-)
drivers/iio/pressure/bmp280-core.c +30 -31
index fdbd3bc27921..79254dd26dfd 100644
@@ -984,6 +984,22 @@ static int bmp085_fetch_eoc_irq(struct device *dev,
 	return 0;
 }
 
+static void bmp280_pm_disable(void *data)
+{
+	struct device *dev = data;
+
+	pm_runtime_get_sync(dev);
+	pm_runtime_put_noidle(dev);
+	pm_runtime_disable(dev);
+}
+
+static void bmp280_regulators_disable(void *data)
+{
+	struct regulator_bulk_data *supplies = data;
+
+	regulator_bulk_disable(BMP280_NUM_SUPPLIES, supplies);
+}
+
 int bmp280_common_probe(struct device *dev,
 			struct regmap *regmap,
 			unsigned int chip,
@@ -1055,6 +1071,11 @@ int bmp280_common_probe(struct device *dev,
 		return ret;
 	}
 
+	ret = devm_add_action_or_reset(dev, bmp280_regulators_disable,
+				       data->supplies);
+	if (ret)
+		return ret;
+
 	/* Wait to make sure we started up properly */
 	usleep_range(data->start_up_time, data->start_up_time + 100);
 
@@ -1069,17 +1090,16 @@ int bmp280_common_probe(struct device *dev,
 	data->regmap = regmap;
 	ret = regmap_read(regmap, BMP280_REG_ID, &chip_id);
 	if (ret < 0)
-		goto out_disable_regulators;
+		return ret;
 	if (chip_id != chip) {
 		dev_err(dev, "bad chip id: expected %x got %x\n",
 			chip, chip_id);
-		ret = -EINVAL;
-		goto out_disable_regulators;
+		return -EINVAL;
 	}
 
 	ret = data->chip_info->chip_config(data);
 	if (ret < 0)
-		goto out_disable_regulators;
+		return ret;
 
 	dev_set_drvdata(dev, indio_dev);
 
@@ -1093,14 +1113,14 @@ int bmp280_common_probe(struct device *dev,
 		if (ret < 0) {
 			dev_err(data->dev,
 				"failed to read calibration coefficients\n");
-			goto out_disable_regulators;
+			return ret;
 		}
 	} else if (chip_id == BMP280_CHIP_ID || chip_id == BME280_CHIP_ID) {
 		ret = bmp280_read_calib(data, &data->calib.bmp280, chip_id);
 		if (ret < 0) {
 			dev_err(data->dev,
 				"failed to read calibration coefficients\n");
-			goto out_disable_regulators;
+			return ret;
 		}
 	}
 
@@ -1112,7 +1132,7 @@ int bmp280_common_probe(struct device *dev,
 	if (irq > 0 || (chip_id  == BMP180_CHIP_ID)) {
 		ret = bmp085_fetch_eoc_irq(dev, name, irq, data);
 		if (ret)
-			goto out_disable_regulators;
+			return ret;
 	}
 
 	/* Enable runtime PM */
@@ -1127,35 +1147,14 @@ int bmp280_common_probe(struct device *dev,
 	pm_runtime_use_autosuspend(dev);
 	pm_runtime_put(dev);
 
-	ret = devm_iio_device_register(dev, indio_dev);
+	ret = devm_add_action_or_reset(dev, bmp280_pm_disable, dev);
 	if (ret)
-		goto out_runtime_pm_disable;
-
-	return 0;
+		return ret;
 
-out_runtime_pm_disable:
-	pm_runtime_get_sync(data->dev);
-	pm_runtime_put_noidle(data->dev);
-	pm_runtime_disable(data->dev);
-out_disable_regulators:
-	regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
-	return ret;
+	return devm_iio_device_register(dev, indio_dev);
 }
 EXPORT_SYMBOL(bmp280_common_probe);
 
-int bmp280_common_remove(struct device *dev)
-{
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct bmp280_data *data = iio_priv(indio_dev);
-
-	pm_runtime_get_sync(data->dev);
-	pm_runtime_put_noidle(data->dev);
-	pm_runtime_disable(data->dev);
-	regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
-	return 0;
-}
-EXPORT_SYMBOL(bmp280_common_remove);
-
 #ifdef CONFIG_PM
 static int bmp280_runtime_suspend(struct device *dev)
 {
drivers/iio/pressure/bmp280-i2c.c +0 -6
index acd9a3784fb4..3109c8e2cc11 100644
@@ -38,11 +38,6 @@ static int bmp280_i2c_probe(struct i2c_client *client,
 				   client->irq);
 }
 
-static int bmp280_i2c_remove(struct i2c_client *client)
-{
-	return bmp280_common_remove(&client->dev);
-}
-
 static const struct acpi_device_id bmp280_acpi_i2c_match[] = {
 	{"BMP0280", BMP280_CHIP_ID },
 	{"BMP0180", BMP180_CHIP_ID },
@@ -82,7 +77,6 @@ static struct i2c_driver bmp280_i2c_driver = {
 		.pm = &bmp280_dev_pm_ops,
 	},
 	.probe		= bmp280_i2c_probe,
-	.remove		= bmp280_i2c_remove,
 	.id_table	= bmp280_i2c_id,
 };
 module_i2c_driver(bmp280_i2c_driver);
drivers/iio/pressure/bmp280-spi.c +0 -6
index 9d57b7a3b134..625b86878ad8 100644
@@ -86,11 +86,6 @@ static int bmp280_spi_probe(struct spi_device *spi)
 				   spi->irq);
 }
 
-static int bmp280_spi_remove(struct spi_device *spi)
-{
-	return bmp280_common_remove(&spi->dev);
-}
-
 static const struct of_device_id bmp280_of_spi_match[] = {
 	{ .compatible = "bosch,bmp085", },
 	{ .compatible = "bosch,bmp180", },
@@ -118,7 +113,6 @@ static struct spi_driver bmp280_spi_driver = {
 	},
 	.id_table = bmp280_spi_id,
 	.probe = bmp280_spi_probe,
-	.remove = bmp280_spi_remove,
 };
 module_spi_driver(bmp280_spi_driver);
 
drivers/iio/pressure/bmp280.h +0 -1
index eda50ef65706..57ba0e85db91 100644
@@ -112,7 +112,6 @@ int bmp280_common_probe(struct device *dev,
 			unsigned int chip,
 			const char *name,
 			int irq);
-int bmp280_common_remove(struct device *dev);
 
 /* PM ops */
 extern const struct dev_pm_ops bmp280_dev_pm_ops;
Signature · 1 line
2.23.0
maintainer
#12 lore raw

Re: [PATCH 4/4] iio: pressure: bmp280: use devm action and remove labels from probe

Quoted 7 lines · On Wed, 2 Oct 2019 10:57:59 +0200 Bartosz Golaszewski <[email protected]> wrote:

From: Bartosz Golaszewski <[email protected]>

We can drop some duplicate code if we use devm_action for disabling regulators and pm. This allows us to completely remove all remove() callbacks from both i2c and spi code.

Ah. I should read all the patches but that would be far too much like hard work. Roll this one and patch 2 together and we should have satisfied the issues I had with that.

Thanks,

Jonathan

Quoted 192 lines
---
 drivers/iio/pressure/bmp280-core.c | 61 +++++++++++++++---------------
 drivers/iio/pressure/bmp280-i2c.c  |  6 ---
 drivers/iio/pressure/bmp280-spi.c  |  6 ---
 drivers/iio/pressure/bmp280.h      |  1 -
 4 files changed, 30 insertions(+), 44 deletions(-)
drivers/iio/pressure/bmp280-core.c +30 -31
index fdbd3bc27921..79254dd26dfd 100644
@@ -984,6 +984,22 @@ static int bmp085_fetch_eoc_irq(struct device *dev,
 	return 0;
 }
 
+static void bmp280_pm_disable(void *data)
+{
+	struct device *dev = data;
+
+	pm_runtime_get_sync(dev);
+	pm_runtime_put_noidle(dev);
+	pm_runtime_disable(dev);
+}
+
+static void bmp280_regulators_disable(void *data)
+{
+	struct regulator_bulk_data *supplies = data;
+
+	regulator_bulk_disable(BMP280_NUM_SUPPLIES, supplies);
+}
+
 int bmp280_common_probe(struct device *dev,
 			struct regmap *regmap,
 			unsigned int chip,
@@ -1055,6 +1071,11 @@ int bmp280_common_probe(struct device *dev,
 		return ret;
 	}
 
+	ret = devm_add_action_or_reset(dev, bmp280_regulators_disable,
+				       data->supplies);
+	if (ret)
+		return ret;
+
 	/* Wait to make sure we started up properly */
 	usleep_range(data->start_up_time, data->start_up_time + 100);
 
@@ -1069,17 +1090,16 @@ int bmp280_common_probe(struct device *dev,
 	data->regmap = regmap;
 	ret = regmap_read(regmap, BMP280_REG_ID, &chip_id);
 	if (ret < 0)
-		goto out_disable_regulators;
+		return ret;
 	if (chip_id != chip) {
 		dev_err(dev, "bad chip id: expected %x got %x\n",
 			chip, chip_id);
-		ret = -EINVAL;
-		goto out_disable_regulators;
+		return -EINVAL;
 	}
 
 	ret = data->chip_info->chip_config(data);
 	if (ret < 0)
-		goto out_disable_regulators;
+		return ret;
 
 	dev_set_drvdata(dev, indio_dev);
 
@@ -1093,14 +1113,14 @@ int bmp280_common_probe(struct device *dev,
 		if (ret < 0) {
 			dev_err(data->dev,
 				"failed to read calibration coefficients\n");
-			goto out_disable_regulators;
+			return ret;
 		}
 	} else if (chip_id == BMP280_CHIP_ID || chip_id == BME280_CHIP_ID) {
 		ret = bmp280_read_calib(data, &data->calib.bmp280, chip_id);
 		if (ret < 0) {
 			dev_err(data->dev,
 				"failed to read calibration coefficients\n");
-			goto out_disable_regulators;
+			return ret;
 		}
 	}
 
@@ -1112,7 +1132,7 @@ int bmp280_common_probe(struct device *dev,
 	if (irq > 0 || (chip_id  == BMP180_CHIP_ID)) {
 		ret = bmp085_fetch_eoc_irq(dev, name, irq, data);
 		if (ret)
-			goto out_disable_regulators;
+			return ret;
 	}
 
 	/* Enable runtime PM */
@@ -1127,35 +1147,14 @@ int bmp280_common_probe(struct device *dev,
 	pm_runtime_use_autosuspend(dev);
 	pm_runtime_put(dev);
 
-	ret = devm_iio_device_register(dev, indio_dev);
+	ret = devm_add_action_or_reset(dev, bmp280_pm_disable, dev);
 	if (ret)
-		goto out_runtime_pm_disable;
-
-	return 0;
+		return ret;
 
-out_runtime_pm_disable:
-	pm_runtime_get_sync(data->dev);
-	pm_runtime_put_noidle(data->dev);
-	pm_runtime_disable(data->dev);
-out_disable_regulators:
-	regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
-	return ret;
+	return devm_iio_device_register(dev, indio_dev);
 }
 EXPORT_SYMBOL(bmp280_common_probe);
 
-int bmp280_common_remove(struct device *dev)
-{
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct bmp280_data *data = iio_priv(indio_dev);
-
-	pm_runtime_get_sync(data->dev);
-	pm_runtime_put_noidle(data->dev);
-	pm_runtime_disable(data->dev);
-	regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
-	return 0;
-}
-EXPORT_SYMBOL(bmp280_common_remove);
-
 #ifdef CONFIG_PM
 static int bmp280_runtime_suspend(struct device *dev)
 {
drivers/iio/pressure/bmp280-i2c.c +0 -6
index acd9a3784fb4..3109c8e2cc11 100644
@@ -38,11 +38,6 @@ static int bmp280_i2c_probe(struct i2c_client *client,
 				   client->irq);
 }
 
-static int bmp280_i2c_remove(struct i2c_client *client)
-{
-	return bmp280_common_remove(&client->dev);
-}
-
 static const struct acpi_device_id bmp280_acpi_i2c_match[] = {
 	{"BMP0280", BMP280_CHIP_ID },
 	{"BMP0180", BMP180_CHIP_ID },
@@ -82,7 +77,6 @@ static struct i2c_driver bmp280_i2c_driver = {
 		.pm = &bmp280_dev_pm_ops,
 	},
 	.probe		= bmp280_i2c_probe,
-	.remove		= bmp280_i2c_remove,
 	.id_table	= bmp280_i2c_id,
 };
 module_i2c_driver(bmp280_i2c_driver);
drivers/iio/pressure/bmp280-spi.c +0 -6
index 9d57b7a3b134..625b86878ad8 100644
@@ -86,11 +86,6 @@ static int bmp280_spi_probe(struct spi_device *spi)
 				   spi->irq);
 }
 
-static int bmp280_spi_remove(struct spi_device *spi)
-{
-	return bmp280_common_remove(&spi->dev);
-}
-
 static const struct of_device_id bmp280_of_spi_match[] = {
 	{ .compatible = "bosch,bmp085", },
 	{ .compatible = "bosch,bmp180", },
@@ -118,7 +113,6 @@ static struct spi_driver bmp280_spi_driver = {
 	},
 	.id_table = bmp280_spi_id,
 	.probe = bmp280_spi_probe,
-	.remove = bmp280_spi_remove,
 };
 module_spi_driver(bmp280_spi_driver);
 
drivers/iio/pressure/bmp280.h +0 -1
index eda50ef65706..57ba0e85db91 100644
@@ -112,7 +112,6 @@ int bmp280_common_probe(struct device *dev,
 			unsigned int chip,
 			const char *name,
 			int irq);
-int bmp280_common_remove(struct device *dev);
 
 /* PM ops */
 extern const struct dev_pm_ops bmp280_dev_pm_ops;