ir-ctl: report timeout when it cannot be modified
PATCH 1/1 ir-ctl: report timeout when it cannot be modified
There are many IR devices which cannot modify their timeout, but do have a timeout which should be reported (e.g. mtk_cir).
Signed-off-by Sean Young <[email protected]>
--- utils/ir-ctl/ir-ctl.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
utils/ir-ctl/ir-ctl.c +8 -5
@@ -966,13 +966,16 @@ static void lirc_features(struct arguments *args, int fd, unsigned features)printf (_ (" - Use wideband receiver\n" ));if (features &LIRC_CAN_MEASURE_CARRIER )printf (_ (" - Can measure carrier\n" )); + +// This ioctl is only supported from kernel 4.18 onwards +unsigned timeout; +int rc =ioctl (fd,LIRC_GET_REC_TIMEOUT , &timeout); +if (rc ==0 ) +printf (_ (" - Receiving timeout %u microseconds\n" ), timeout); +if (features &LIRC_CAN_SET_REC_TIMEOUT ) { -unsigned min_timeout, max_timeout, timeout; +unsigned min_timeout, max_timeout; -// This ioctl is only supported from kernel 4.18 onwards -int rc =ioctl (fd,LIRC_GET_REC_TIMEOUT , &timeout); -if (rc ==0 ) -printf (_ (" - Receiving timeout %u microseconds\n" ), timeout); rc =ioctl (fd,LIRC_GET_MIN_TIMEOUT , &min_timeout);if (rc) {fprintf (stderr,_ ("warning: %s: device supports setting receiving timeout but LIRC_GET_MIN_TIMEOUT returns: %m\n" ), dev);
Signature · 1 line
2.21.0