Skip to contentSkip to conversation

4.9.195-stable review

PATCH In review Greg Kroah-Hartman 6 participants 135 messages Oct 3, 2019 – Oct 4, 2019

Subsystems (6)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 4.9.195-stable review

This is the start of the stable review cycle for the 4.9.195 release. There are 129 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat 05 Oct 2019 03:37:47 PM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.195-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.9.195-rc1

Filipe Manana <[email protected]>
Btrfs: fix race setting up and completing qgroup rescan workers

Lu Fengqi <[email protected]>
btrfs: qgroup: Drop quota_root and fs_info parameters from update_qgroup_status_item

Pavel Shilovsky <[email protected]>
CIFS: Fix oplock handling for SMB 2.1+ protocols

Murphy Zhou <[email protected]>
CIFS: fix max ea value size

Chris Brandt <[email protected]>
i2c: riic: Clear NACK in tend isr

Laurent Vivier <[email protected]>
hwrng: core - don't wait on add_early_randomness()

Chao Yu <[email protected]>
quota: fix wrong condition in is_quota_modification()

Theodore Ts'o <[email protected]>
ext4: fix punch hole for inline_data file systems

Rakesh Pandit <[email protected]>
ext4: fix warning inside ext4_convert_unwritten_extents_endio

Tetsuo Handa <[email protected]>
/dev/mem: Bail out upon SIGKILL.

Denis Kenzior <[email protected]>
cfg80211: Purge frame registrations on iftype change

Xiao Ni <[email protected]>
md/raid6: Set R5_ReadError when there is read failure on parity disk

Nikolay Borisov <[email protected]>
btrfs: Relinquish CPUs in btrfs_compare_trees

Filipe Manana <[email protected]>
Btrfs: fix use-after-free when using the tree modification log

Mark Salyzyn <[email protected]>
ovl: filter of trusted xattr results in audit

Michal Hocko <[email protected]>
memcg, kmem: do not fail __GFP_NOFAIL charges

Mark Brown <[email protected]>
regulator: Defer init completion for a while after late_initcall

Thadeu Lima de Souza Cascardo <[email protected]>
alarmtimer: Use EOPNOTSUPP instead of ENOTSUPP

Luis Araneda <[email protected]>
ARM: zynq: Use memcpy_toio instead of memcpy on smp bring-up

Amadeusz Sławiński <[email protected]>
ASoC: Intel: Fix use of potentially uninitialized variable

Amadeusz Sławiński <[email protected]>
ASoC: Intel: NHLT: Fix debug print format

Hans de Goede <[email protected]>

    media: sn9c20x: Add MSI MS-1039 laptop to flip_dmi_table

Sean Christopherson <[email protected]>
KVM: x86: Manually calculate reserved bits when loading PDPTRS

Jan Dakinevich <[email protected]>

    KVM: x86: set ctxt->have_exception in x86_decode_insn()

Jan Dakinevich <[email protected]>
KVM: x86: always stop emulation on page fault

Helge Deller <[email protected]>
parisc: Disable HP HSC-PCI Cards to prevent kernel crash

Vasily Averin <[email protected]>
fuse: fix missing unlock_page in fuse_writepage()

Vincent Whitchurch <[email protected]>
printk: Do not lose last line in kmsg buffer dump

Linus Torvalds <[email protected]>
printk: remove games with previous record flags

Ira Weiny <[email protected]>
IB/hfi1: Define variables as unsigned long to fix KASAN warning

Takashi Sakamoto <[email protected]>
ALSA: firewire-tascam: check intermediate state of clock status and retry

Takashi Sakamoto <[email protected]>
ALSA: firewire-tascam: handle error code when getting current source of clock

MyungJoo Ham <[email protected]>
PM / devfreq: passive: fix compiler warning

Sakari Ailus <[email protected]>
media: omap3isp: Set device on omap3isp subdevs

Qu Wenruo <[email protected]>
btrfs: extent-tree: Make sure we only allocate extents from block groups with the same type

Takashi Iwai <[email protected]>
ALSA: hda/realtek - Blacklist PC beep for Lenovo ThinkCentre M73/93

Tomas Bortoli <[email protected]>
media: ttusb-dec: Fix info-leak in ttusb_dec_send_command()

Ahzo <[email protected]>
drm/amd/powerplay/smu7: enforce minimal VBITimeout (v2)

Kai-Heng Feng <[email protected]>
e1000e: add workaround for possible stalled packet

Kevin Easton <[email protected]>
libertas: Add missing sentinel at end of if_usb.c fw_table

Al Cooper <[email protected]>
mmc: sdhci: Fix incorrect switch to HS mode

Peter Ujfalusi <[email protected]>

    ASoC: dmaengine: Make the pcm->name equal to pcm->id if the name is not set

Harald Freudenberger <[email protected]>
s390/crypto: xts-aes-s390 fix extra run-time crypto self tests finding

Masami Hiramatsu <[email protected]>
kprobes: Prohibit probing on BUG() and WARN() address

Peter Ujfalusi <[email protected]>
dmaengine: ti: edma: Do not reset reserved paRAM slots

Yufen Yu <[email protected]>
md/raid1: fail run raid1 array when active disk less than one

Wang Shenran <[email protected]>
hwmon: (acpi_power_meter) Change log level for 'unsafe software power cap'

Wenwen Wang <[email protected]>
ACPI / PCI: fix acpi_pci_irq_enable() memory leak

Wenwen Wang <[email protected]>
ACPI: custom_method: fix memory leaks

Marek Szyprowski <[email protected]>
ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks

Tzvetomir Stoyanov <[email protected]>
libtraceevent: Change users plugin directory

Qian Cai <[email protected]>
iommu/amd: Silence warnings under memory pressure

Tom Wu <[email protected]>
nvmet: fix data units read and written counters in SMART log

Mark Rutland <[email protected]>
arm64: kpti: ensure patched kernel text is fetched from PoU

Al Stone <[email protected]>
ACPI / CPPC: do not require the _PSD method

Mauro Carvalho Chehab <[email protected]>
media: ov9650: add a sanity check

Maciej S. Szmigiero <[email protected]>

    media: saa7134: fix terminology around saa7134_i2c_eeprom_md7134_gate()

Wenwen Wang <[email protected]>
media: cpia2_usb: fix memory leaks

Wenwen Wang <[email protected]>
media: saa7146: add cleanup in hexium_attach()

Kamil Konieczny <[email protected]>
PM / devfreq: exynos-bus: Correct clock enable sequence

Leonard Crestez <[email protected]>
PM / devfreq: passive: Use non-devm notifiers

Wenwen Wang <[email protected]>
media: dvb-core: fix a memory leak bug

Hans Verkuil <[email protected]>
media: hdpvr: add terminating 0 at end of string

Hans Verkuil <[email protected]>

    media: radio/si470x: kill urb on error

André Draszik <[email protected]>
ARM: dts: imx7d: cl-som-imx7: make ethernet work again

Arnd Bergmann <[email protected]>
net: lpc-enet: fix printk format strings

Sakari Ailus <[email protected]>
media: omap3isp: Don't set streaming state on random subdevs

Arnd Bergmann <[email protected]>
dmaengine: iop-adma: use correct printk format strings

Hans Verkuil <[email protected]>
media: gspca: zero usb_buf on error

Xiaofei Tan <[email protected]>
efi: cper: print AER info of PCIe fatal error

Guoqing Jiang <[email protected]>
md: don't set In_sync if array is frozen

Guoqing Jiang <[email protected]>
md: don't call spare_active in md_reap_sync_thread if all member devices can't work

Dan Carpenter <[email protected]>
EDAC/altera: Use the proper type for the IRQ status bits

chenzefeng <[email protected]>

    ia64:unwind: fix double free for mod->arch.init_unw_table

Ard van Breemen <[email protected]>
ALSA: usb-audio: Skip bSynchAddress endpoint check if it is invalid

Vinod Koul <[email protected]>
base: soc: Export soc_device_register/unregister APIs

Oliver Neukum <[email protected]>
media: iguanair: add sanity checks

Jia-Ju Bai <[email protected]>
ALSA: i2c: ak4xxx-adda: Fix a possible null pointer dereference in build_adc_controls()

Takashi Iwai <[email protected]>
ALSA: hda - Show the fatal CORB/RIRB error more clearly

Thomas Gleixner <[email protected]>
x86/apic: Soft disable APIC before initializing it

Grzegorz Halat <[email protected]>
x86/reboot: Always use NMI fallback when shutdown via reboot vector IPI fails

Juri Lelli <[email protected]>
sched/core: Fix CPU controller for !RT_GROUP_SCHED

Vincent Guittot <[email protected]>
sched/fair: Fix imbalance due to CPU affinity

Luke Nowakowski-Krijger <[email protected]>
media: hdpvr: Add device num check and handling

Wen Yang <[email protected]>
media: exynos4-is: fix leaked of_node references

Arnd Bergmann <[email protected]>
media: dib0700: fix link error for dibx000_i2c_set_speed

Nick Stoughton <[email protected]>
leds: leds-lp5562 allow firmware files up to the maximum length

Stefan Wahren <[email protected]>
dmaengine: bcm2835: Print error in case setting DMA mask fails

Oleksandr Suvorov <[email protected]>
ASoC: sgtl5000: Fix charge pump source assignment

Axel Lin <[email protected]>
regulator: lm363x: Fix off-by-one n_voltages for lm3632 ldo_vpos/ldo_vneg

Chris Wilson <[email protected]>
ALSA: hda: Flush interrupts on disabling

Ori Nimron <[email protected]>
nfc: enforce CAP_NET_RAW for raw sockets

Ori Nimron <[email protected]>
ieee802154: enforce CAP_NET_RAW for raw sockets

Ori Nimron <[email protected]>
ax25: enforce CAP_NET_RAW for raw sockets

Ori Nimron <[email protected]>
appletalk: enforce CAP_NET_RAW for raw sockets

Ori Nimron <[email protected]>
mISDN: enforce CAP_NET_RAW for raw sockets

Oliver Neukum <[email protected]>
usbnet: sanity checking of packet sizes and device mtu

Bjørn Mork <[email protected]>
usbnet: ignore endpoints with invalid wMaxPacketSize

Stephen Hemminger <[email protected]>
skge: fix checksum byte order

Eric Dumazet <[email protected]>
sch_netem: fix a divide by zero in tabledist()

Takeshi Misawa <[email protected]>
ppp: Fix memory leak in ppp_write

Li RongQing <[email protected]>
openvswitch: change type of UPCALL_PID attribute to NLA_UNSPEC

Bjorn Andersson <[email protected]>
net: qrtr: Stop rx_worker before freeing node

Peter Mamonov <[email protected]>
net/phy: fix DP83865 10 Mbps HDX loopback disable function

Xin Long <[email protected]>
macsec: drop skb sk before calling gro_cells_receive

Bjørn Mork <[email protected]>
cdc_ncm: fix divide-by-zero caused by invalid wMaxPacketSize

Uwe Kleine-König <[email protected]>
arcnet: provide a buffer big enough to actually receive packets

Jian-Hong Pan <[email protected]>
Bluetooth: btrtl: Additional Realtek 8822CE Bluetooth devices

Darrick J. Wong <[email protected]>
xfs: don't crash on null attr fork xfs_bmapi_read

Chris Wilson <[email protected]>
drm: Flush output polling on shutdown

Chao Yu <[email protected]>
f2fs: fix to do sanity check on segment bitmap of LFS curseg

Chao Yu <[email protected]>
Revert "f2fs: avoid out-of-range memory access"

Surbhi Palande <[email protected]>
f2fs: check all the data segments against all node ones

Marc Zyngier <[email protected]>
irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices

Waiman Long <[email protected]>
locking/lockdep: Add debug_locks check in __lock_downgrade()

David Lechner <[email protected]>
power: supply: sysfs: ratelimit property read error message

Yu Wang <[email protected]>
mac80211: handle deauthentication/disassociation from TDLS peer

Arkadiusz Miskiewicz <[email protected]>
mac80211: Print text for disassociation reason

Josh Poimboeuf <[email protected]>
objtool: Clobber user CFLAGS variable

Shih-Yuan Lee (FourDollars) <[email protected]>
ALSA: hda - Add laptop imic fixup for ASUS M9V laptop

Takashi Iwai <[email protected]>
ASoC: fsl: Fix of-node refcount unbalance in fsl_ssi_probe_from_dt()

Marco Felsch <[email protected]>
media: tvp5150: fix switch exit in set control handler

Gustavo A. R. Silva <[email protected]>
crypto: talitos - fix missing break in switch statement

Tokunori Ikegami <[email protected]>
mtd: cfi_cmdset_0002: Use chip_good() to retry in do_write_oneword()

Alan Stern <[email protected]>
HID: hidraw: Fix invalid read in hidraw_ioctl

Alan Stern <[email protected]>
HID: logitech: Fix general protection fault caused by Logitech driver

Alan Stern <[email protected]>
HID: prodikeys: Fix general protection fault during probe

Jack Morgenstein <[email protected]>
IB/core: Add an unbound WQ type to the new CQ API

Marcel Holtmann <[email protected]>
Revert "Bluetooth: validate BLE connection interval updates"

-------------

Diffstat:

 Makefile                                         |   4 +-
 arch/arm/boot/dts/exynos5420-peach-pit.dts       |   1 +
 arch/arm/boot/dts/exynos5800-peach-pi.dts        |   1 +
 arch/arm/boot/dts/imx7d-cl-som-imx7.dts          |   4 +-
 arch/arm/mach-zynq/platsmp.c                     |   2 +-
 arch/arm64/mm/proc.S                             |   9 ++
 arch/ia64/kernel/module.c                        |   8 +-
 arch/s390/crypto/aes_s390.c                      |   6 ++
 arch/x86/kernel/apic/apic.c                      |   8 ++
 arch/x86/kernel/smp.c                            |  46 ++++++----
 arch/x86/kvm/emulate.c                           |   2 +
 arch/x86/kvm/x86.c                               |  21 ++++-
 drivers/acpi/cppc_acpi.c                         |   6 +-
 drivers/acpi/custom_method.c                     |   5 +-
 drivers/acpi/pci_irq.c                           |   4 +-
 drivers/base/soc.c                               |   2 +
 drivers/bluetooth/btusb.c                        |   3 +
 drivers/char/hw_random/core.c                    |   2 +-
 drivers/char/mem.c                               |  21 +++++
 drivers/crypto/talitos.c                         |   1 +
 drivers/devfreq/exynos-bus.c                     |  31 ++++---
 drivers/devfreq/governor_passive.c               |   7 +-
 drivers/dma/bcm2835-dma.c                        |   4 +-
 drivers/dma/edma.c                               |   9 +-
 drivers/dma/iop-adma.c                           |  18 ++--
 drivers/edac/altera_edac.c                       |   4 +-
 drivers/firmware/efi/cper.c                      |  15 +++
 drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c |   5 +
 drivers/gpu/drm/drm_probe_helper.c               |   9 +-
 drivers/hid/hid-lg.c                             |  10 +-
 drivers/hid/hid-lg4ff.c                          |   1 -
 drivers/hid/hid-prodikeys.c                      |  12 ++-
 drivers/hid/hidraw.c                             |   2 +-
 drivers/hwmon/acpi_power_meter.c                 |   4 +-
 drivers/i2c/busses/i2c-riic.c                    |   1 +
 drivers/infiniband/core/cq.c                     |   8 +-
 drivers/infiniband/core/device.c                 |  15 ++-
 drivers/infiniband/core/mad.c                    |   2 +-
 drivers/infiniband/hw/hfi1/mad.c                 |  45 ++++-----
 drivers/iommu/amd_iommu.c                        |   4 +-
 drivers/irqchip/irq-gic-v3-its.c                 |   9 +-
 drivers/isdn/mISDN/socket.c                      |   2 +
 drivers/leds/leds-lp5562.c                       |   6 +-
 drivers/md/md.c                                  |  14 ++-
 drivers/md/raid1.c                               |  13 ++-
 drivers/md/raid5.c                               |   4 +-
 drivers/media/dvb-core/dvbdev.c                  |   4 +-
 drivers/media/i2c/ov9650.c                       |   5 +
 drivers/media/i2c/tvp5150.c                      |   2 +-
 drivers/media/pci/saa7134/saa7134-i2c.c          |  12 ++-
 drivers/media/pci/saa7146/hexium_gemini.c        |   3 +
 drivers/media/platform/exynos4-is/fimc-is.c      |   1 +
 drivers/media/platform/exynos4-is/media-dev.c    |   2 +
 drivers/media/platform/omap3isp/isp.c            |   8 ++
 drivers/media/platform/omap3isp/ispccdc.c        |   1 +
 drivers/media/platform/omap3isp/ispccp2.c        |   1 +
 drivers/media/platform/omap3isp/ispcsi2.c        |   1 +
 drivers/media/platform/omap3isp/isppreview.c     |   1 +
 drivers/media/platform/omap3isp/ispresizer.c     |   1 +
 drivers/media/platform/omap3isp/ispstat.c        |   2 +
 drivers/media/radio/si470x/radio-si470x-usb.c    |   5 +-
 drivers/media/rc/iguanair.c                      |  15 ++-
 drivers/media/usb/cpia2/cpia2_usb.c              |   4 +
 drivers/media/usb/dvb-usb/dib0700_devices.c      |   8 ++
 drivers/media/usb/gspca/konica.c                 |   5 +
 drivers/media/usb/gspca/nw80x.c                  |   5 +
 drivers/media/usb/gspca/ov519.c                  |  10 ++
 drivers/media/usb/gspca/ov534.c                  |   5 +
 drivers/media/usb/gspca/ov534_9.c                |   1 +
 drivers/media/usb/gspca/se401.c                  |   5 +
 drivers/media/usb/gspca/sn9c20x.c                |  12 +++
 drivers/media/usb/gspca/sonixb.c                 |   5 +
 drivers/media/usb/gspca/sonixj.c                 |   5 +
 drivers/media/usb/gspca/spca1528.c               |   5 +
 drivers/media/usb/gspca/sq930x.c                 |   5 +
 drivers/media/usb/gspca/sunplus.c                |   5 +
 drivers/media/usb/gspca/vc032x.c                 |   5 +
 drivers/media/usb/gspca/w996Xcf.c                |   5 +
 drivers/media/usb/hdpvr/hdpvr-core.c             |  13 ++-
 drivers/media/usb/ttusb-dec/ttusb_dec.c          |   2 +-
 drivers/mmc/host/sdhci.c                         |   4 +-
 drivers/mtd/chips/cfi_cmdset_0002.c              |  18 ++--
 drivers/net/arcnet/arcnet.c                      |  31 ++++---
 drivers/net/ethernet/intel/e1000e/ich8lan.c      |  10 ++
 drivers/net/ethernet/intel/e1000e/ich8lan.h      |   2 +-
 drivers/net/ethernet/marvell/skge.c              |   2 +-
 drivers/net/ethernet/nxp/lpc_eth.c               |  13 +--
 drivers/net/macsec.c                             |   1 +
 drivers/net/phy/national.c                       |   9 +-
 drivers/net/ppp/ppp_generic.c                    |   2 +
 drivers/net/usb/cdc_ncm.c                        |   6 +-
 drivers/net/usb/usbnet.c                         |   8 ++
 drivers/net/wireless/marvell/libertas/if_usb.c   |   3 +-
 drivers/nvme/target/admin-cmd.c                  |  14 +--
 drivers/parisc/dino.c                            |  24 +++++
 drivers/power/supply/power_supply_sysfs.c        |   3 +-
 drivers/regulator/core.c                         |  42 ++++++---
 drivers/regulator/lm363x-regulator.c             |   2 +-
 fs/btrfs/ctree.c                                 |   5 +-
 fs/btrfs/extent-tree.c                           |   8 ++
 fs/btrfs/qgroup.c                                |  43 +++++----
 fs/cifs/smb2ops.c                                |   5 +
 fs/cifs/xattr.c                                  |   2 +-
 fs/ext4/extents.c                                |   4 +-
 fs/ext4/inode.c                                  |   9 ++
 fs/f2fs/segment.c                                |  44 ++++++++-
 fs/f2fs/super.c                                  |   4 +-
 fs/fuse/file.c                                   |   1 +
 fs/overlayfs/inode.c                             |   3 +-
 fs/xfs/libxfs/xfs_bmap.c                         |  29 ++++--
 include/linux/bug.h                              |   5 +
 include/linux/quotaops.h                         |   2 +-
 include/rdma/ib_verbs.h                          |   9 +-
 kernel/kprobes.c                                 |   3 +-
 kernel/locking/lockdep.c                         |   3 +
 kernel/printk/printk.c                           | 111 +++++------------------
 kernel/sched/core.c                              |   4 -
 kernel/sched/fair.c                              |   5 +-
 kernel/time/alarmtimer.c                         |   4 +-
 mm/memcontrol.c                                  |  10 ++
 net/appletalk/ddp.c                              |   5 +
 net/ax25/af_ax25.c                               |   2 +
 net/bluetooth/hci_event.c                        |   5 -
 net/bluetooth/l2cap_core.c                       |   9 +-
 net/ieee802154/socket.c                          |   3 +
 net/mac80211/ieee80211_i.h                       |   3 +
 net/mac80211/mlme.c                              |  17 +++-
 net/mac80211/tdls.c                              |  23 +++++
 net/nfc/llcp_sock.c                              |   7 +-
 net/openvswitch/datapath.c                       |   2 +-
 net/qrtr/qrtr.c                                  |   1 +
 net/sched/sch_netem.c                            |   2 +-
 net/wireless/util.c                              |   1 +
 sound/firewire/tascam/tascam-pcm.c               |   3 +
 sound/firewire/tascam/tascam-stream.c            |  42 ++++++---
 sound/hda/hdac_controller.c                      |   2 +
 sound/i2c/other/ak4xxx-adda.c                    |   7 +-
 sound/pci/hda/hda_controller.c                   |   5 +-
 sound/pci/hda/hda_intel.c                        |   2 +-
 sound/pci/hda/patch_analog.c                     |   1 +
 sound/pci/hda/patch_realtek.c                    |   3 +
 sound/soc/codecs/sgtl5000.c                      |  15 ++-
 sound/soc/fsl/fsl_ssi.c                          |   5 +-
 sound/soc/intel/common/sst-ipc.c                 |   2 +
 sound/soc/intel/skylake/skl-nhlt.c               |   2 +-
 sound/soc/soc-generic-dmaengine-pcm.c            |   6 ++
 sound/usb/pcm.c                                  |   1 +
 tools/lib/traceevent/Makefile                    |   6 +-
 tools/lib/traceevent/event-plugin.c              |   2 +-
 tools/objtool/Makefile                           |   2 +-
 150 files changed, 893 insertions(+), 379 deletions(-)
author maintainer
#1 lore raw

PATCH 1/129 Revert "Bluetooth: validate BLE connection interval updates"

From: Marcel Holtmann <[email protected]>

[ Upstream commit 68d19d7d995759b96169da5aac313363f92a9075 ]

This reverts commit c49a8682fc5d298d44e8d911f4fa14690ea9485e.

There are devices which require low connection intervals for usable operation including keyboards and mice. Forcing a static connection interval for these types of devices has an impact in latency and causes a regression.

---
 net/bluetooth/hci_event.c  | 5 -----
 net/bluetooth/l2cap_core.c | 9 +--------
 2 files changed, 1 insertion(+), 13 deletions(-)
net/bluetooth/hci_event.c +0 -5
index 163a239bda91a..6f78489fdb132 100644
@@ -5089,11 +5089,6 @@ static void hci_le_remote_conn_param_req_evt(struct hci_dev *hdev,
 		return send_conn_param_neg_reply(hdev, handle,
 						 HCI_ERROR_UNKNOWN_CONN_ID);
 
-	if (min < hcon->le_conn_min_interval ||
-	    max > hcon->le_conn_max_interval)
-		return send_conn_param_neg_reply(hdev, handle,
-						 HCI_ERROR_INVALID_LL_PARAMS);
-
 	if (hci_check_conn_params(min, max, latency, timeout))
 		return send_conn_param_neg_reply(hdev, handle,
 						 HCI_ERROR_INVALID_LL_PARAMS);
net/bluetooth/l2cap_core.c +1 -8
index 4912e80dacefa..48d23abfe7992 100644
@@ -5277,14 +5277,7 @@ static inline int l2cap_conn_param_update_req(struct l2cap_conn *conn,
 
 	memset(&rsp, 0, sizeof(rsp));
 
-	if (min < hcon->le_conn_min_interval ||
-	    max > hcon->le_conn_max_interval) {
-		BT_DBG("requested connection interval exceeds current bounds.");
-		err = -EINVAL;
-	} else {
-		err = hci_check_conn_params(min, max, latency, to_multiplier);
-	}
-
+	err = hci_check_conn_params(min, max, latency, to_multiplier);
 	if (err)
 		rsp.result = cpu_to_le16(L2CAP_CONN_PARAM_REJECTED);
 	else
Signature · 1 line
2.20.1
author maintainer
#2 lore raw

PATCH 2/129 IB/core: Add an unbound WQ type to the new CQ API

In reply to Greg Kroah-Hartman

From: Jack Morgenstein <[email protected]>

commit f794809a7259dfaa3d47d90ef5a86007cf48b1ce upstream.

The upstream kernel commit cited below modified the workqueue in the new CQ API to be bound to a specific CPU (instead of being unbound). This caused ALL users of the new CQ API to use the same bound WQ.

Specifically, MAD handling was severely delayed when the CPU bound to the WQ was busy handling (higher priority) interrupts.

This caused a delay in the MAD "heartbeat" response handling, which resulted in ports being incorrectly classified as "down".

To fix this, add a new "unbound" WQ type to the new CQ API, so that users have the option to choose either a bound WQ or an unbound WQ.

For MADs, choose the new "unbound" WQ.

Fixes b7363e67b23e ("IB/device: Convert ib-comp-wq to be CPU-bound")
---
 drivers/infiniband/core/cq.c     |    8 ++++++--
 drivers/infiniband/core/device.c |   15 ++++++++++++++-
 drivers/infiniband/core/mad.c    |    2 +-
 include/rdma/ib_verbs.h          |    9 ++++++---
 4 files changed, 27 insertions(+), 7 deletions(-)
drivers/infiniband/core/cq.c +6 -2
@@ -102,12 +102,12 @@ static void ib_cq_poll_work(struct work_
 	completed = __ib_process_cq(cq, IB_POLL_BUDGET_WORKQUEUE);
 	if (completed >= IB_POLL_BUDGET_WORKQUEUE ||
 	    ib_req_notify_cq(cq, IB_POLL_FLAGS) > 0)
-		queue_work(ib_comp_wq, &cq->work);
+		queue_work(cq->comp_wq, &cq->work);
 }
 
 static void ib_cq_completion_workqueue(struct ib_cq *cq, void *private)
 {
-	queue_work(ib_comp_wq, &cq->work);
+	queue_work(cq->comp_wq, &cq->work);
 }
 
 /**
@@ -159,9 +159,12 @@ struct ib_cq *ib_alloc_cq(struct ib_devi
 		ib_req_notify_cq(cq, IB_CQ_NEXT_COMP);
 		break;
 	case IB_POLL_WORKQUEUE:
+	case IB_POLL_UNBOUND_WORKQUEUE:
 		cq->comp_handler = ib_cq_completion_workqueue;
 		INIT_WORK(&cq->work, ib_cq_poll_work);
 		ib_req_notify_cq(cq, IB_CQ_NEXT_COMP);
+		cq->comp_wq = (cq->poll_ctx == IB_POLL_WORKQUEUE) ?
+				ib_comp_wq : ib_comp_unbound_wq;
 		break;
 	default:
 		ret = -EINVAL;
@@ -196,6 +199,7 @@ void ib_free_cq(struct ib_cq *cq)
 		irq_poll_disable(&cq->iop);
 		break;
 	case IB_POLL_WORKQUEUE:
+	case IB_POLL_UNBOUND_WORKQUEUE:
 		cancel_work_sync(&cq->work);
 		break;
 	default:
drivers/infiniband/core/device.c +14 -1
@@ -59,6 +59,7 @@ struct ib_client_data {
 };
 
 struct workqueue_struct *ib_comp_wq;
+struct workqueue_struct *ib_comp_unbound_wq;
 struct workqueue_struct *ib_wq;
 EXPORT_SYMBOL_GPL(ib_wq);
 
@@ -1005,10 +1006,19 @@ static int __init ib_core_init(void)
 		goto err;
 	}
 
+	ib_comp_unbound_wq =
+		alloc_workqueue("ib-comp-unb-wq",
+				WQ_UNBOUND | WQ_HIGHPRI | WQ_MEM_RECLAIM |
+				WQ_SYSFS, WQ_UNBOUND_MAX_ACTIVE);
+	if (!ib_comp_unbound_wq) {
+		ret = -ENOMEM;
+		goto err_comp;
+	}
+
 	ret = class_register(&ib_class);
 	if (ret) {
 		pr_warn("Couldn't create InfiniBand device class\n");
-		goto err_comp;
+		goto err_comp_unbound;
 	}
 
 	ret = ibnl_init();
@@ -1055,6 +1065,8 @@ err_ibnl:
 	ibnl_cleanup();
 err_sysfs:
 	class_unregister(&ib_class);
+err_comp_unbound:
+	destroy_workqueue(ib_comp_unbound_wq);
 err_comp:
 	destroy_workqueue(ib_comp_wq);
 err:
@@ -1071,6 +1083,7 @@ static void __exit ib_core_cleanup(void)
 	addr_cleanup();
 	ibnl_cleanup();
 	class_unregister(&ib_class);
+	destroy_workqueue(ib_comp_unbound_wq);
 	destroy_workqueue(ib_comp_wq);
 	/* Make sure that any pending umem accounting work is done. */
 	destroy_workqueue(ib_wq);
drivers/infiniband/core/mad.c +1 -1
@@ -3163,7 +3163,7 @@ static int ib_mad_port_open(struct ib_de
 	}
 
 	port_priv->cq = ib_alloc_cq(port_priv->device, port_priv, cq_size, 0,
-			IB_POLL_WORKQUEUE);
+			IB_POLL_UNBOUND_WORKQUEUE);
 	if (IS_ERR(port_priv->cq)) {
 		dev_err(&device->dev, "Couldn't create ib_mad CQ\n");
 		ret = PTR_ERR(port_priv->cq);
include/rdma/ib_verbs.h +6 -3
@@ -63,6 +63,7 @@
 
 extern struct workqueue_struct *ib_wq;
 extern struct workqueue_struct *ib_comp_wq;
+extern struct workqueue_struct *ib_comp_unbound_wq;
 
 union ib_gid {
 	u8	raw[16];
@@ -1415,9 +1416,10 @@ struct ib_ah {
 typedef void (*ib_comp_handler)(struct ib_cq *cq, void *cq_context);
 
 enum ib_poll_context {
-	IB_POLL_DIRECT,		/* caller context, no hw completions */
-	IB_POLL_SOFTIRQ,	/* poll from softirq context */
-	IB_POLL_WORKQUEUE,	/* poll from workqueue */
+	IB_POLL_DIRECT,		   /* caller context, no hw completions */
+	IB_POLL_SOFTIRQ,	   /* poll from softirq context */
+	IB_POLL_WORKQUEUE,	   /* poll from workqueue */
+	IB_POLL_UNBOUND_WORKQUEUE, /* poll from unbound workqueue */
 };
 
 struct ib_cq {
@@ -1434,6 +1436,7 @@ struct ib_cq {
 		struct irq_poll		iop;
 		struct work_struct	work;
 	};
+	struct workqueue_struct *comp_wq;
 };
 
 struct ib_srq {
author maintainer
#3 lore raw

PATCH 3/129 HID: prodikeys: Fix general protection fault during probe

In reply to Greg Kroah-Hartman

From: Alan Stern <[email protected]>

commit 98375b86c79137416e9fd354177b85e768c16e56 upstream.

The syzbot fuzzer provoked a general protection fault in the hid-prodikeys driver:

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access

general protection fault: 0000 [#1] SMP KASAN
CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.3.0-rc5+ #28
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
RIP: 0010:pcmidi_submit_output_report drivers/hid/hid-prodikeys.c:300  [inline]
RIP: 0010:pcmidi_set_operational drivers/hid/hid-prodikeys.c:558 [inline]
RIP: 0010:pcmidi_snd_initialise drivers/hid/hid-prodikeys.c:686 [inline]
RIP: 0010:pk_probe+0xb51/0xfd0 drivers/hid/hid-prodikeys.c:836
Code: 0f 85 50 04 00 00 48 8b 04 24 4c 89 7d 10 48 8b 58 08 e8 b2 53 e4 fc

48 8b 54 24 20 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 13 04 00 00 48 ba 00 00 00 00 00 fc ff df 49 8b

The problem is caused by the fact that pcmidi_get_output_report() will return an error if the HID device doesn't provide the right sort of output report, but pcmidi_set_operational() doesn't bother to check the return code and assumes the function call always succeeds.

This patch adds the missing check and aborts the probe operation if necessary.

---
 drivers/hid/hid-prodikeys.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
drivers/hid/hid-prodikeys.c +10 -2
@@ -556,10 +556,14 @@ static void pcmidi_setup_extra_keys(
 
 static int pcmidi_set_operational(struct pcmidi_snd *pm)
 {
+	int rc;
+
 	if (pm->ifnum != 1)
 		return 0; /* only set up ONCE for interace 1 */
 
-	pcmidi_get_output_report(pm);
+	rc = pcmidi_get_output_report(pm);
+	if (rc < 0)
+		return rc;
 	pcmidi_submit_output_report(pm, 0xc1);
 	return 0;
 }
@@ -688,7 +692,11 @@ static int pcmidi_snd_initialise(struct
 	spin_lock_init(&pm->rawmidi_in_lock);
 
 	init_sustain_timers(pm);
-	pcmidi_set_operational(pm);
+	err = pcmidi_set_operational(pm);
+	if (err < 0) {
+		pk_error("failed to find output report\n");
+		goto fail_register;
+	}
 
 	/* register it */
 	err = snd_card_register(card);
author maintainer
#4 lore raw

PATCH 4/129 HID: logitech: Fix general protection fault caused by Logitech driver

In reply to Greg Kroah-Hartman

From: Alan Stern <[email protected]>

commit 5f9242775bb61f390f0885f23fc16397262c7538 upstream.

The syzbot fuzzer found a general protection fault in the HID subsystem:

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access

general protection fault: 0000 [#1] SMP KASAN
CPU: 0 PID: 3715 Comm: syz-executor.3 Not tainted 5.2.0-rc6+ #15
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:__pm_runtime_resume+0x49/0x180 drivers/base/power/runtime.c:1069
Code: ed 74 d5 fe 45 85 ed 0f 85 9a 00 00 00 e8 6f 73 d5 fe 48 8d bd c1 02
00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 48
89 fa 83 e2 07 38 d0 7f 08 84 c0 0f 85 fe 00 00 00
RSP: 0018:ffff8881d99d78e0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000020 RCX: ffffc90003f3f000
RDX: 0000000416d8686d RSI: ffffffff82676841 RDI: 00000020b6c3436a
RBP: 00000020b6c340a9 R08: ffff8881c6d64800 R09: fffffbfff0e84c25
R10: ffff8881d99d7940 R11: ffffffff87426127 R12: 0000000000000004
R13: 0000000000000000 R14: ffff8881d9b94000 R15: ffffffff897f9048
FS:  00007f047f542700(0000) GS:ffff8881db200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b30f21000 CR3: 00000001ca032000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  pm_runtime_get_sync include/linux/pm_runtime.h:226 [inline]
  usb_autopm_get_interface+0x1b/0x50 drivers/usb/core/driver.c:1707
  usbhid_power+0x7c/0xe0 drivers/hid/usbhid/hid-core.c:1234
  hid_hw_power include/linux/hid.h:1038 [inline]
  hidraw_open+0x20d/0x740 drivers/hid/hidraw.c:282
  chrdev_open+0x219/0x5c0 fs/char_dev.c:413
  do_dentry_open+0x497/0x1040 fs/open.c:778
  do_last fs/namei.c:3416 [inline]
  path_openat+0x1430/0x3ff0 fs/namei.c:3533
  do_filp_open+0x1a1/0x280 fs/namei.c:3563
  do_sys_open+0x3c0/0x580 fs/open.c:1070
  do_syscall_64+0xb7/0x560 arch/x86/entry/common.c:301
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

It turns out the fault was caused by a bug in the HID Logitech driver, which violates the requirement that every pathway calling hid_hw_start() must also call hid_hw_stop(). This patch fixes the bug by making sure the requirement is met.

---
 drivers/hid/hid-lg.c    |   10 ++++++----
 drivers/hid/hid-lg4ff.c |    1 -
 2 files changed, 6 insertions(+), 5 deletions(-)
drivers/hid/hid-lg.c +6 -4
@@ -761,7 +761,7 @@ static int lg_probe(struct hid_device *h
 
 		if (!buf) {
 			ret = -ENOMEM;
-			goto err_free;
+			goto err_stop;
 		}
 
 		ret = hid_hw_raw_request(hdev, buf[0], buf, sizeof(cbuf),
@@ -793,9 +793,12 @@ static int lg_probe(struct hid_device *h
 		ret = lg4ff_init(hdev);
 
 	if (ret)
-		goto err_free;
+		goto err_stop;
 
 	return 0;
+
+err_stop:
+	hid_hw_stop(hdev);
 err_free:
 	kfree(drv_data);
 	return ret;
@@ -806,8 +809,7 @@ static void lg_remove(struct hid_device
 	struct lg_drv_data *drv_data = hid_get_drvdata(hdev);
 	if (drv_data->quirks & LG_FF4)
 		lg4ff_deinit(hdev);
-	else
-		hid_hw_stop(hdev);
+	hid_hw_stop(hdev);
 	kfree(drv_data);
 }
 
drivers/hid/hid-lg4ff.c +0 -1
@@ -1485,7 +1485,6 @@ int lg4ff_deinit(struct hid_device *hid)
 		}
 	}
 #endif
-	hid_hw_stop(hid);
 	drv_data->device_props = NULL;
 
 	kfree(entry);
author maintainer
#5 lore raw

PATCH 5/129 HID: hidraw: Fix invalid read in hidraw_ioctl

In reply to Greg Kroah-Hartman

From: Alan Stern <[email protected]>

commit 416dacb819f59180e4d86a5550052033ebb6d72c upstream.

The syzbot fuzzer has reported a pair of problems in the hidraw_ioctl() function: slab-out-of-bounds read and use-after-free read. An example of the first:

BUG: KASAN: slab-out-of-bounds in strlen+0x79/0x90 lib/string.c:525
Read of size 1 at addr ffff8881c8035f38 by task syz-executor.4/2833

CPU: 1 PID: 2833 Comm: syz-executor.4 Not tainted 5.3.0-rc2+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0xca/0x13e lib/dump_stack.c:113
  print_address_description+0x6a/0x32c mm/kasan/report.c:351
  __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482
  kasan_report+0xe/0x12 mm/kasan/common.c:612
  strlen+0x79/0x90 lib/string.c:525
  strlen include/linux/string.h:281 [inline]
  hidraw_ioctl+0x245/0xae0 drivers/hid/hidraw.c:446
  vfs_ioctl fs/ioctl.c:46 [inline]
  file_ioctl fs/ioctl.c:509 [inline]
  do_vfs_ioctl+0xd2d/0x1330 fs/ioctl.c:696
  ksys_ioctl+0x9b/0xc0 fs/ioctl.c:713
  __do_sys_ioctl fs/ioctl.c:720 [inline]
  __se_sys_ioctl fs/ioctl.c:718 [inline]
  __x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:718
  do_syscall_64+0xb7/0x580 arch/x86/entry/common.c:296
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x459829
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7

48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f7a68f6dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000459829
RDX: 0000000000000000 RSI: 0000000080404805 RDI: 0000000000000004
RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f7a68f6e6d4
R13: 00000000004c21de R14: 00000000004d5620 R15: 00000000ffffffff

The two problems have the same cause: hidraw_ioctl() fails to test whether the device has been removed. This patch adds the missing test.

---
 drivers/hid/hidraw.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hid/hidraw.c +1 -1
@@ -378,7 +378,7 @@ static long hidraw_ioctl(struct file *fi
 
 	mutex_lock(&minors_lock);
 	dev = hidraw_table[minor];
-	if (!dev) {
+	if (!dev || !dev->exist) {
 		ret = -ENODEV;
 		goto out;
 	}
author maintainer
#6 lore raw

PATCH 6/129 mtd: cfi_cmdset_0002: Use chip_good() to retry in do_write_oneword()

In reply to Greg Kroah-Hartman

From: Tokunori Ikegami <[email protected]>

commit 37c673ade35c707d50583b5b25091ff8ebdeafd7 upstream.

As reported by the OpenWRT team, write requests sometimes fail on some platforms.
Currently to check the state chip_ready() is used correctly as described by the flash memory S29GL256P11TFI01 datasheet.
Also chip_good() is used to check if the write is succeeded and it was implemented by the commit fb4a90bfcd6d8 ("[MTD] CFI-0002 - Improve error checking").
But actually the write failure is caused on some platforms and also it can be fixed by using chip_good() to check the state and retry instead. Also it seems that it is caused after repeated about 1,000 times to retry the write one word with the reset command.
By using chip_good() to check the state to be done it can be reduced the retry with reset.
It is depended on the actual flash chip behavior so the root cause is unknown.

---
 drivers/mtd/chips/cfi_cmdset_0002.c |   18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)
drivers/mtd/chips/cfi_cmdset_0002.c +12 -6
@@ -1624,29 +1624,35 @@ static int __xipram do_write_oneword(str
 			continue;
 		}
 
-		if (time_after(jiffies, timeo) && !chip_ready(map, adr)){
+		/*
+		 * We check "time_after" and "!chip_good" before checking
+		 * "chip_good" to avoid the failure due to scheduling.
+		 */
+		if (time_after(jiffies, timeo) && !chip_good(map, adr, datum)) {
 			xip_enable(map, chip, adr);
 			printk(KERN_WARNING "MTD %s(): software timeout\n", __func__);
 			xip_disable(map, chip, adr);
+			ret = -EIO;
 			break;
 		}
 
-		if (chip_ready(map, adr))
+		if (chip_good(map, adr, datum))
 			break;
 
 		/* Latency issues. Drop the lock, wait a while and retry */
 		UDELAY(map, chip, adr, 1);
 	}
+
 	/* Did we succeed? */
-	if (!chip_good(map, adr, datum)) {
+	if (ret) {
 		/* reset on all failures. */
 		map_write( map, CMD(0xF0), chip->start );
 		/* FIXME - should have reset delay before continuing */
 
-		if (++retry_cnt <= MAX_RETRIES)
+		if (++retry_cnt <= MAX_RETRIES) {
+			ret = 0;
 			goto retry;
-
-		ret = -EIO;
+		}
 	}
 	xip_enable(map, chip, adr);
  op_done:

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

author maintainer
#7 lore raw

PATCH 7/129 crypto: talitos - fix missing break in switch statement

In reply to Greg Kroah-Hartman

From: Gustavo A. R. Silva <[email protected]>

commit 5fc194ea6d34dfad9833d3043ce41d6c52aff39a upstream.

Add missing break statement in order to prevent the code from falling through to case CRYPTO_ALG_TYPE_AHASH.

Fixes aeb4c132f33d ("crypto: talitos - Convert to new AEAD interface")
---
 drivers/crypto/talitos.c |    1 +
 1 file changed, 1 insertion(+)
drivers/crypto/talitos.c +1 -0
@@ -3043,6 +3043,7 @@ static int talitos_remove(struct platfor
 			break;
 		case CRYPTO_ALG_TYPE_AEAD:
 			crypto_unregister_aead(&t_alg->algt.alg.aead);
+			break;
 		case CRYPTO_ALG_TYPE_AHASH:
 			crypto_unregister_ahash(&t_alg->algt.alg.hash);
 			break;
author maintainer
#8 lore raw

PATCH 8/129 media: tvp5150: fix switch exit in set control handler

In reply to Greg Kroah-Hartman

From: Marco Felsch <[email protected]>

commit 2d29bcc8c237874795175b2930fa9a45a115175a upstream.

The function only consists of a single switch case block without a default case. Unsupported control requests are indicated by the -EINVAL return code trough the last return statement at the end of the function. So exiting just the switch case block returns the -EINVAL error code but the hue control is supported and a zero should be returned instead.

Replace the break by a 'return 0' to fix this behaviour.

Fixes d183e4efcae8 ("[media] v4l: tvp5150: Add missing break in set

control handler")

---
 drivers/media/i2c/tvp5150.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/i2c/tvp5150.c +1 -1
@@ -824,7 +824,7 @@ static int tvp5150_s_ctrl(struct v4l2_ct
 		return 0;
 	case V4L2_CID_HUE:
 		tvp5150_write(sd, TVP5150_HUE_CTL, ctrl->val);
-		break;
+		return 0;
 	case V4L2_CID_TEST_PATTERN:
 		decoder->enable = ctrl->val ? false : true;
 		tvp5150_selmux(sd);
author maintainer
#9 lore raw

PATCH 9/129 ASoC: fsl: Fix of-node refcount unbalance in fsl_ssi_probe_from_dt()

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

commit 2757970f6d0d0a112247600b23d38c0c728ceeb3 upstream.

The node obtained from of_find_node_by_path() has to be unreferenced after the use, but we forgot it for the root node.

Fixes f0fba2ad1b6b ("ASoC: multi-component - ASoC Multi-Component Support")
Cc Timur Tabi <[email protected]>
Cc Nicolin Chen <[email protected]>
Cc Xiubo Li <[email protected]>
Cc Fabio Estevam <[email protected]>
---
 sound/soc/fsl/fsl_ssi.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
sound/soc/fsl/fsl_ssi.c +4 -1
@@ -1431,6 +1431,7 @@ static int fsl_ssi_probe(struct platform
 	struct fsl_ssi_private *ssi_private;
 	int ret = 0;
 	struct device_node *np = pdev->dev.of_node;
+	struct device_node *root;
 	const struct of_device_id *of_id;
 	const char *p, *sprop;
 	const uint32_t *iprop;
@@ -1620,7 +1621,9 @@ static int fsl_ssi_probe(struct platform
 	 * device tree.  We also pass the address of the CPU DAI driver
 	 * structure.
 	 */
-	sprop = of_get_property(of_find_node_by_path("/"), "compatible", NULL);
+	root = of_find_node_by_path("/");
+	sprop = of_get_property(root, "compatible", NULL);
+	of_node_put(root);
 	/* Sometimes the compatible name has a "fsl," prefix, so we strip it. */
 	p = strrchr(sprop, ',');
 	if (p)
author maintainer
#10 lore raw

PATCH 10/129 ALSA: hda - Add laptop imic fixup for ASUS M9V laptop

In reply to Greg Kroah-Hartman

From: Shih-Yuan Lee (FourDollars) <[email protected]>

commit 7b485d175631be676424aedb8cd2f66d0c93da78 upstream.

The same fixup to enable laptop imic is needed for ASUS M9V with AD1986A codec like another HP machine.

---
 sound/pci/hda/patch_analog.c |    1 +
 1 file changed, 1 insertion(+)
sound/pci/hda/patch_analog.c +1 -0
@@ -370,6 +370,7 @@ static const struct hda_fixup ad1986a_fi
 
 static const struct snd_pci_quirk ad1986a_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x30af, "HP B2800", AD1986A_FIXUP_LAPTOP_IMIC),
+	SND_PCI_QUIRK(0x1043, 0x1153, "ASUS M9V", AD1986A_FIXUP_LAPTOP_IMIC),
 	SND_PCI_QUIRK(0x1043, 0x1443, "ASUS Z99He", AD1986A_FIXUP_EAPD),
 	SND_PCI_QUIRK(0x1043, 0x1447, "ASUS A8JN", AD1986A_FIXUP_EAPD),
 	SND_PCI_QUIRK_MASK(0x1043, 0xff00, 0x8100, "ASUS P5", AD1986A_FIXUP_3STACK),
author maintainer
#11 lore raw

PATCH 11/129 objtool: Clobber user CFLAGS variable

In reply to Greg Kroah-Hartman

From: Josh Poimboeuf <[email protected]>

commit f73b3cc39c84220e6dccd463b5c8279b03514646 upstream.

If the build user has the CFLAGS variable set in their environment, objtool blindly appends to it, which can cause unexpected behavior.

Clobber CFLAGS to ensure consistent objtool compilation behavior.

---
 tools/objtool/Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/objtool/Makefile +1 -1
@@ -32,7 +32,7 @@ INCLUDES := -I$(srctree)/tools/include \
 	    -I$(srctree)/tools/arch/$(HOSTARCH)/include/uapi \
 	    -I$(srctree)/tools/objtool/arch/$(ARCH)/include
 WARNINGS := $(EXTRA_WARNINGS) -Wno-switch-default -Wno-switch-enum -Wno-packed
-CFLAGS   += -Wall -Werror $(WARNINGS) -fomit-frame-pointer -O2 -g $(INCLUDES)
+CFLAGS   := -Wall -Werror $(WARNINGS) -fomit-frame-pointer -O2 -g $(INCLUDES)
 LDFLAGS  += -lelf $(LIBSUBCMD)
 
 # Allow old libelf to be used:
author maintainer
#12 lore raw

PATCH 12/129 mac80211: Print text for disassociation reason

In reply to Greg Kroah-Hartman

From: Arkadiusz Miskiewicz <[email protected]>

[ Upstream commit 68506e9af132a6b5735c1dd4b11240da0cf5eeae ]

When disassociation happens only numeric reason is printed in ieee80211_rx_mgmt_disassoc(). Add text variant, too.

---
 net/mac80211/mlme.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
net/mac80211/mlme.c +3 -2
index f462f026fc6aa..090e2aa8630e8 100644
@@ -2869,8 +2869,9 @@ static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
 
 	reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
 
-	sdata_info(sdata, "disassociated from %pM (Reason: %u)\n",
-		   mgmt->sa, reason_code);
+	sdata_info(sdata, "disassociated from %pM (Reason: %u=%s)\n",
+		   mgmt->sa, reason_code,
+		   ieee80211_get_reason_code_string(reason_code));
 
 	ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
 
Signature · 1 line
2.20.1
author maintainer
#13 lore raw

PATCH 13/129 mac80211: handle deauthentication/disassociation from TDLS peer

In reply to Greg Kroah-Hartman

From: Yu Wang <[email protected]>

[ Upstream commit 79c92ca42b5a3e0ea172ea2ce8df8e125af237da ]

When receiving a deauthentication/disassociation frame from a TDLS peer, a station should not disconnect the current AP, but only disable the current TDLS link if it's enabled.

Without this change, a TDLS issue can be reproduced by following the steps as below:

1. STA-1 and STA-2 are connected to AP, bidirection traffic is running between STA-1 and STA-2.
2. Set up TDLS link between STA-1 and STA-2, stay for a while, then teardown TDLS link.
3. Repeat step #2 and monitor the connection between STA and AP.

During the test, one STA may send a deauthentication/disassociation frame to another, after TDLS teardown, with reason code 6/7, which
means: Class 2/3 frame received from nonassociated STA.

On receive this frame, the receiver STA will disconnect the current AP and then reconnect. It's not a expected behavior, purpose of this frame should be disabling the TDLS link, not the link with AP.

---
 net/mac80211/ieee80211_i.h |  3 +++
 net/mac80211/mlme.c        | 12 +++++++++++-
 net/mac80211/tdls.c        | 23 +++++++++++++++++++++++
 3 files changed, 37 insertions(+), 1 deletion(-)
net/mac80211/ieee80211_i.h +3 -0
index 6708de10a3e5e..0b0de3030e0dc 100644
@@ -2123,6 +2123,9 @@ void ieee80211_tdls_cancel_channel_switch(struct wiphy *wiphy,
 					  const u8 *addr);
 void ieee80211_teardown_tdls_peers(struct ieee80211_sub_if_data *sdata);
 void ieee80211_tdls_chsw_work(struct work_struct *wk);
+void ieee80211_tdls_handle_disconnect(struct ieee80211_sub_if_data *sdata,
+				      const u8 *peer, u16 reason);
+const char *ieee80211_get_reason_code_string(u16 reason_code);
 
 extern const struct ethtool_ops ieee80211_ethtool_ops;
 
net/mac80211/mlme.c +11 -1
index 090e2aa8630e8..c75594a12c38e 100644
@@ -2755,7 +2755,7 @@ static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
 #define case_WLAN(type) \
 	case WLAN_REASON_##type: return #type
 
-static const char *ieee80211_get_reason_code_string(u16 reason_code)
+const char *ieee80211_get_reason_code_string(u16 reason_code)
 {
 	switch (reason_code) {
 	case_WLAN(UNSPECIFIED);
@@ -2820,6 +2820,11 @@ static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
 	if (len < 24 + 2)
 		return;
 
+	if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) {
+		ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code);
+		return;
+	}
+
 	if (ifmgd->associated &&
 	    ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) {
 		const u8 *bssid = ifmgd->associated->bssid;
@@ -2869,6 +2874,11 @@ static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
 
 	reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
 
+	if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) {
+		ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code);
+		return;
+	}
+
 	sdata_info(sdata, "disassociated from %pM (Reason: %u=%s)\n",
 		   mgmt->sa, reason_code,
 		   ieee80211_get_reason_code_string(reason_code));
net/mac80211/tdls.c +23 -0
index c64ae68ae4f84..863f92c087014 100644
@@ -2001,3 +2001,26 @@ void ieee80211_tdls_chsw_work(struct work_struct *wk)
 	}
 	rtnl_unlock();
 }
+
+void ieee80211_tdls_handle_disconnect(struct ieee80211_sub_if_data *sdata,
+				      const u8 *peer, u16 reason)
+{
+	struct ieee80211_sta *sta;
+
+	rcu_read_lock();
+	sta = ieee80211_find_sta(&sdata->vif, peer);
+	if (!sta || !sta->tdls) {
+		rcu_read_unlock();
+		return;
+	}
+	rcu_read_unlock();
+
+	tdls_dbg(sdata, "disconnected from TDLS peer %pM (Reason: %u=%s)\n",
+		 peer, reason,
+		 ieee80211_get_reason_code_string(reason));
+
+	ieee80211_tdls_oper_request(&sdata->vif, peer,
+				    NL80211_TDLS_TEARDOWN,
+				    WLAN_REASON_TDLS_TEARDOWN_UNREACHABLE,
+				    GFP_ATOMIC);
+}
Signature · 1 line
2.20.1
author maintainer
#14 lore raw

PATCH 14/129 power: supply: sysfs: ratelimit property read error message

In reply to Greg Kroah-Hartman

From: David Lechner <[email protected]>

[ Upstream commit 87a2b65fc855e6be50f791c2ebbb492541896827 ]

This adds rate limiting to the message that is printed when reading a power supply property via sysfs returns an error. This will prevent userspace applications from unintentionally dDOSing the system by continuously reading a property that returns an error.

---
 drivers/power/supply/power_supply_sysfs.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/power/supply/power_supply_sysfs.c +2 -1
index c0fc98e03c912..85cb5b9c1b6f0 100644
@@ -84,7 +84,8 @@ static ssize_t power_supply_show_property(struct device *dev,
 				dev_dbg(dev, "driver has no data for `%s' property\n",
 					attr->attr.name);
 			else if (ret != -ENODEV && ret != -EAGAIN)
-				dev_err(dev, "driver failed to report `%s' property: %zd\n",
+				dev_err_ratelimited(dev,
+					"driver failed to report `%s' property: %zd\n",
 					attr->attr.name, ret);
 			return ret;
 		}
Signature · 1 line
2.20.1
author maintainer
#15 lore raw

PATCH 15/129 locking/lockdep: Add debug_locks check in __lock_downgrade()

In reply to Greg Kroah-Hartman

From: Waiman Long <[email protected]>

[ Upstream commit 513e1073d52e55b8024b4f238a48de7587c64ccf ]

Tetsuo Handa had reported he saw an incorrect "downgrading a read lock" warning right after a previous lockdep warning. It is likely that the previous warning turned off lock debugging causing the lockdep to have inconsistency states leading to the lock downgrade warning.

Fix that by add a check for debug_locks at the beginning of __lock_downgrade().

---
 kernel/locking/lockdep.c | 3 +++
 1 file changed, 3 insertions(+)
kernel/locking/lockdep.c +3 -0
index 4b27aaffdf352..d7f425698a4a1 100644
@@ -3446,6 +3446,9 @@ __lock_set_class(struct lockdep_map *lock, const char *name,
 	unsigned int depth;
 	int i;
 
+	if (unlikely(!debug_locks))
+		return 0;
+
 	depth = curr->lockdep_depth;
 	/*
 	 * This function is about (re)setting the class of a held lock,
Signature · 1 line
2.20.1
author maintainer
#16 lore raw

PATCH 16/129 irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices

In reply to Greg Kroah-Hartman

From: Marc Zyngier <[email protected]>

[ Upstream commit c9c96e30ecaa0aafa225aa1a5392cb7db17c7a82 ]

When allocating a range of LPIs for a Multi-MSI capable device, this allocation extended to the closest power of 2.

But on the release path, the interrupts are released one by one. This results in not releasing the "extra" range, leaking the its_device. Trying to reprobe the device will then fail.

Fix it by releasing the LPIs the same way we allocate them.

Fixes 8208d1708b88 ("irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size")
---
 drivers/irqchip/irq-gic-v3-its.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/irqchip/irq-gic-v3-its.c +4 -5
index 83ca754250fb7..0c0cd2768d6e9 100644
@@ -1519,14 +1519,13 @@ static void its_irq_domain_free(struct irq_domain *domain, unsigned int virq,
 	struct its_device *its_dev = irq_data_get_irq_chip_data(d);
 	int i;
 
+	bitmap_release_region(its_dev->event_map.lpi_map,
+			      its_get_event_id(irq_domain_get_irq_data(domain, virq)),
+			      get_count_order(nr_irqs));
+
 	for (i = 0; i < nr_irqs; i++) {
 		struct irq_data *data = irq_domain_get_irq_data(domain,
 								virq + i);
-		u32 event = its_get_event_id(data);
-
-		/* Mark interrupt index as unused */
-		clear_bit(event, its_dev->event_map.lpi_map);
-
 		/* Nuke the entry in the domain */
 		irq_domain_reset_irq_data(data);
 	}
Signature · 1 line
2.20.1
author maintainer
#17 lore raw

PATCH 17/129 f2fs: check all the data segments against all node ones

In reply to Greg Kroah-Hartman

From: Surbhi Palande <[email protected]>

[ Upstream commit 1166c1f2f69117ad254189ca781287afa6e550b6 ]

As a part of the sanity checking while mounting, distinct segment number assignment to data and node segments is verified. Fixing a small bug in this verification between node and data segments. We need to check all the data segments with all the node segments.

Fixes 042be0f849e5f ("f2fs: fix to do sanity check with current segment number")
---
 fs/f2fs/super.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
fs/f2fs/super.c +2 -2
index 4ebe695724755..9eff18c1f3e46 100644
@@ -1557,11 +1557,11 @@ int sanity_check_ckpt(struct f2fs_sb_info *sbi)
 		}
 	}
 	for (i = 0; i < NR_CURSEG_NODE_TYPE; i++) {
-		for (j = i; j < NR_CURSEG_DATA_TYPE; j++) {
+		for (j = 0; j < NR_CURSEG_DATA_TYPE; j++) {
 			if (le32_to_cpu(ckpt->cur_node_segno[i]) ==
 				le32_to_cpu(ckpt->cur_data_segno[j])) {
 				f2fs_msg(sbi->sb, KERN_ERR,
-					"Data segment (%u) and Data segment (%u)"
+					"Node segment (%u) and Data segment (%u)"
 					" has the same segno: %u", i, j,
 					le32_to_cpu(ckpt->cur_node_segno[i]));
 				return 1;
Signature · 1 line
2.20.1
author maintainer
#18 lore raw

PATCH 18/129 Revert "f2fs: avoid out-of-range memory access"

In reply to Greg Kroah-Hartman

From: Chao Yu <[email protected]>

[ Upstream commit a37d0862d17411edb67677a580a6f505ec2225f6 ]

As Pavel Machek reported:

"We normally use -EUCLEAN to signal filesystem corruption. Plus, it is good idea to report it to the syslog and mark filesystem as "needing fsck" if filesystem can do that."

Still we need improve the original patch with:
- use unlikely keyword
- add message print
- return EUCLEAN

However, after rethink this patch, I don't think we should add such condition check here as below reasons:
- We have already checked the field in f2fs_sanity_check_ckpt(),
- If there is fs corrupt or security vulnerability, there is nothing to guarantee the field is integrated after the check, unless we do the check before each of its use, however no filesystem does that.
- We only have similar check for bitmap, which was added due to there is bitmap corruption happened on f2fs' runtime in product.
- There are so many key fields in SB/CP/NAT did have such check after f2fs_sanity_check_{sb,cp,..}.

So I propose to revert this unneeded check.

This reverts commit 56f3ce675103e3fb9e631cfb4131fc768bc23e9a.

---
 fs/f2fs/segment.c | 5 -----
 1 file changed, 5 deletions(-)
fs/f2fs/segment.c +0 -5
index c983f7d28f033..2fb99a081de8f 100644
@@ -1709,11 +1709,6 @@ static int read_compacted_summaries(struct f2fs_sb_info *sbi)
 		seg_i = CURSEG_I(sbi, i);
 		segno = le32_to_cpu(ckpt->cur_data_segno[i]);
 		blk_off = le16_to_cpu(ckpt->cur_data_blkoff[i]);
-		if (blk_off > ENTRIES_IN_SUM) {
-			f2fs_bug_on(sbi, 1);
-			f2fs_put_page(page, 1);
-			return -EFAULT;
-		}
 		seg_i->next_segno = segno;
 		reset_curseg(sbi, i, 0);
 		seg_i->alloc_type = ckpt->alloc_type[i];
Signature · 1 line
2.20.1
author maintainer
#19 lore raw

PATCH 19/129 f2fs: fix to do sanity check on segment bitmap of LFS curseg

In reply to Greg Kroah-Hartman

From: Chao Yu <[email protected]>

[ Upstream commit c854f4d681365498f53ba07843a16423625aa7e9 ]

As Jungyeon Reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203233

- Reproduces
gcc poc_13.c
./run.sh f2fs

- Kernel messages
F2FS-fs (sdb): Bitmap was wrongly set, blk:4608
kernel BUG at fs/f2fs/segment.c:2133!

 RIP: 0010:update_sit_entry+0x35d/0x3e0
 Call Trace:
  f2fs_allocate_data_block+0x16c/0x5a0
  do_write_page+0x57/0x100
  f2fs_do_write_node_page+0x33/0xa0
  __write_node_page+0x270/0x4e0
  f2fs_sync_node_pages+0x5df/0x670
  f2fs_write_checkpoint+0x364/0x13a0
  f2fs_sync_fs+0xa3/0x130
  f2fs_do_sync_file+0x1a6/0x810
  do_fsync+0x33/0x60
  __x64_sys_fsync+0xb/0x10
  do_syscall_64+0x43/0x110
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

The testcase fails because that, in fuzzed image, current segment was allocated with LFS type, its .next_blkoff should point to an unused block address, but actually, its bitmap shows it's not. So during allocation, f2fs crash when setting bitmap.

Introducing sanity_check_curseg() to check such inconsistence of current in-used segment.

---
 fs/f2fs/segment.c | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)
fs/f2fs/segment.c +39 -0
index 2fb99a081de8f..1d5a352138109 100644
@@ -2490,6 +2490,41 @@ static int build_dirty_segmap(struct f2fs_sb_info *sbi)
 	return init_victim_secmap(sbi);
 }
 
+static int sanity_check_curseg(struct f2fs_sb_info *sbi)
+{
+	int i;
+
+	/*
+	 * In LFS/SSR curseg, .next_blkoff should point to an unused blkaddr;
+	 * In LFS curseg, all blkaddr after .next_blkoff should be unused.
+	 */
+	for (i = 0; i < NO_CHECK_TYPE; i++) {
+		struct curseg_info *curseg = CURSEG_I(sbi, i);
+		struct seg_entry *se = get_seg_entry(sbi, curseg->segno);
+		unsigned int blkofs = curseg->next_blkoff;
+
+		if (f2fs_test_bit(blkofs, se->cur_valid_map))
+			goto out;
+
+		if (curseg->alloc_type == SSR)
+			continue;
+
+		for (blkofs += 1; blkofs < sbi->blocks_per_seg; blkofs++) {
+			if (!f2fs_test_bit(blkofs, se->cur_valid_map))
+				continue;
+out:
+			f2fs_msg(sbi->sb, KERN_ERR,
+				"Current segment's next free block offset is "
+				"inconsistent with bitmap, logtype:%u, "
+				"segno:%u, type:%u, next_blkoff:%u, blkofs:%u",
+				i, curseg->segno, curseg->alloc_type,
+				curseg->next_blkoff, blkofs);
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+
 /*
  * Update min, max modified time for cost-benefit GC algorithm
  */
@@ -2583,6 +2618,10 @@ int build_segment_manager(struct f2fs_sb_info *sbi)
 	if (err)
 		return err;
 
+	err = sanity_check_curseg(sbi);
+	if (err)
+		return err;
+
 	init_min_max_mtime(sbi);
 	return 0;
 }
Signature · 1 line
2.20.1
author maintainer
#20 lore raw

PATCH 20/129 drm: Flush output polling on shutdown

In reply to Greg Kroah-Hartman

From: Chris Wilson <[email protected]>

[ Upstream commit 3b295cb1a411d9c82bbfaa66bc17a8508716ed07 ]

We need to mark the output polling as disabled to prevent concurrent irqs from queuing new work as shutdown the probe -- causing that work to execute after we have freed the structs:

<4> [341.846490] DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock))
<4> [341.846497] WARNING: CPU: 3 PID: 3300 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x49/0x50
<4> [341.846508] Modules linked in: i915(-) vgem thunderbolt snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm mcs7830 btusb usbnet btrtl mii btbcm btintel bluetooth ecdh_generic ecc mei_me mei prime_numbers i2c_hid pinctrl_sunrisepoint pinctrl_intel [last unloaded: i915]
<4> [341.846546] CPU: 3 PID: 3300 Comm: i915_module_loa Tainted: G U 5.2.0-rc2-CI-CI_DRM_6175+ #1
<4> [341.846553] Hardware name: Dell Inc. XPS 13 9360/0823VW, BIOS 2.9.0 07/09/2018
<4> [341.846560] RIP: 0010:mutex_destroy+0x49/0x50
<4> [341.846565] Code: 00 00 5b c3 e8 a8 9f 3b 00 85 c0 74 ed 8b 05 3e 55 23 01 85 c0 75 e3 48 c7 c6 00 d0 08 82 48 c7 c7 a8 aa 07 82 e8 e7 08 fa ff <0f> 0b eb cc 0f 1f 00 48 b8 11 11 11 11 11 11 11 11 48 89 76 20 48
<4> [341.846578] RSP: 0018:ffffc900006cfdb0 EFLAGS: 00010286
<4> [341.846583] RAX: 0000000000000000 RBX: ffff88826759a168 RCX: 0000000000000000
<4> [341.846589] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffffffff8112844c
<4> [341.846595] RBP: ffff8882708fa548 R08: 0000000000000000 R09: 0000000000039600
<4> [341.846601] R10: 0000000000000000 R11: 0000000000000ce4 R12: ffffffffa07de1e0
<4> [341.846607] R13: 0000000000000000 R14: 0000000000000000 R15: ffffffffa07de2d0
<4> [341.846613] FS: 00007f62b5ae0e40(0000) GS:ffff888276380000(0000) knlGS:0000000000000000
<4> [341.846620] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [341.846626] CR2: 000055a4e064f4a0 CR3: 0000000266b16006 CR4: 00000000003606e0
<4> [341.846632] Call Trace:

<4> [341.846639]  drm_fb_helper_fini.part.17+0xb3/0x100
<4> [341.846682]  intel_fbdev_fini+0x20/0x80 [i915]
<4> [341.846722]  intel_modeset_cleanup+0x9a/0x140 [i915]
<4> [341.846750]  i915_driver_unload+0xa3/0x100 [i915]
<4> [341.846778]  i915_pci_remove+0x19/0x30 [i915]
<4> [341.846784]  pci_device_remove+0x36/0xb0
<4> [341.846790]  device_release_driver_internal+0xd3/0x1b0
<4> [341.846795]  driver_detach+0x3f/0x80
<4> [341.846800]  bus_remove_driver+0x53/0xd0
<4> [341.846805]  pci_unregister_driver+0x25/0xa0
<4> [341.846843]  i915_exit+0x16/0x1c [i915]
<4> [341.846849]  __se_sys_delete_module+0x162/0x210
<4> [341.846855]  ? trace_hardirqs_off_thunk+0x1a/0x1c
<4> [341.846859]  ? do_syscall_64+0xd/0x1c0
<4> [341.846864]  do_syscall_64+0x55/0x1c0
<4> [341.846869]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

<4> [341.846875] RIP: 0033:0x7f62b51871b7
<4> [341.846881] Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48 <4> [341.846897] RSP: 002b:00007ffe7a227138 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
<4> [341.846904] RAX: ffffffffffffffda RBX: 00007ffe7a2272b0 RCX: 00007f62b51871b7
<4> [341.846910] RDX: 0000000000000001 RSI: 0000000000000800 RDI: 0000557cd6b55948
<4> [341.846916] RBP: 0000557cd6b558e0 R08: 0000557cd6b5594c R09: 00007ffe7a227160
<4> [341.846922] R10: 00007ffe7a226134 R11: 0000000000000206 R12: 0000000000000000
<4> [341.846927] R13: 00007ffe7a227820 R14: 0000000000000000 R15: 0000000000000000
<4> [341.846936] irq event stamp: 3547847
<4> [341.846940] hardirqs last enabled at (3547847): [<ffffffff819aad2c>] _raw_spin_unlock_irqrestore+0x4c/0x60
<4> [341.846949] hardirqs last disabled at (3547846): [<ffffffff819aab9d>] _raw_spin_lock_irqsave+0xd/0x50
<4> [341.846957] softirqs last enabled at (3547376): [<ffffffff81c0033a>] __do_softirq+0x33a/0x4b9
<4> [341.846966] softirqs last disabled at (3547367): [<ffffffff810b6379>] irq_exit+0xa9/0xc0
<4> [341.846973] WARNING: CPU: 3 PID: 3300 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x49/0x50
<4> [341.846980] ---[ end trace ba94ca8952ba970e ]---
<7> [341.866547] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes
<7> [341.890480] [drm:drm_add_display_info] non_desktop set to 0
<7> [341.890530] [drm:drm_add_edid_modes] ELD: no CEA Extension found
<7> [341.890537] [drm:drm_add_display_info] non_desktop set to 0
<7> [341.890578] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:eDP-1] probed modes :
<7> [341.890589] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
<7> [341.890602] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
<4> [341.890628] general protection fault: 0000 [#1] PREEMPT SMP PTI
<4> [341.890636] CPU: 0 PID: 508 Comm: kworker/0:4 Tainted: G U W 5.2.0-rc2-CI-CI_DRM_6175+ #1
<4> [341.890646] Hardware name: Dell Inc. XPS 13 9360/0823VW, BIOS 2.9.0 07/09/2018
<4> [341.890655] Workqueue: events output_poll_execute
<4> [341.890663] RIP: 0010:drm_setup_crtcs+0x13e/0xbe0
<4> [341.890669] Code: 00 41 8b 44 24 58 85 c0 0f 8e f9 01 00 00 44 8b 6c 24 20 44 8b 74 24 28 31 db 31 ed 49 8b 44 24 60 48 63 d5 44 89 ee 83 c5 01 <48> 8b 04 d0 44 89 f2 48 8b 38 48 8b 87 88 01 00 00 48 8b 40 20 e8 <4> [341.890686] RSP: 0018:ffffc9000033fd40 EFLAGS: 00010202
<4> [341.890692] RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000002 RCX: 0000000000000000
<4> [341.890700] RDX: 0000000000000001 RSI: 0000000000000c80 RDI: 00000000ffffffff
<4> [341.890707] RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
<4> [341.890715] R10: 0000000000000c80 R11: 0000000000000000 R12: ffff888267599fe8
<4> [341.890722] R13: 0000000000000c80 R14: 0000000000000708 R15: 0000000000000007
<4> [341.890730] FS: 0000000000000000(0000) GS:ffff888276200000(0000) knlGS:0000000000000000
<4> [341.890739] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [341.890745] CR2: 000055a4e064f4a0 CR3: 000000026d234003 CR4: 00000000003606f0
<4> [341.890752] Call Trace:

<4> [341.890760]  drm_fb_helper_hotplug_event.part.24+0x89/0xb0
<4> [341.890768]  drm_kms_helper_hotplug_event+0x21/0x30
<4> [341.890774]  output_poll_execute+0x9d/0x1a0
<4> [341.890782]  process_one_work+0x245/0x610
<4> [341.890790]  worker_thread+0x37/0x380
<4> [341.890796]  ? process_one_work+0x610/0x610
<4> [341.890802]  kthread+0x119/0x130
<4> [341.890808]  ? kthread_park+0x80/0x80
<4> [341.890815]  ret_from_fork+0x3a/0x50

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109964

---
 drivers/gpu/drm/drm_probe_helper.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/gpu/drm/drm_probe_helper.c +8 -1
index d7822bef19869..b33d39d9dd14d 100644
@@ -387,6 +387,9 @@ static void output_poll_execute(struct work_struct *work)
 	enum drm_connector_status old_status;
 	bool repoll = false, changed;
 
+	if (!dev->mode_config.poll_enabled)
+		return;
+
 	/* Pick up any changes detected by the probe functions. */
 	changed = dev->mode_config.delayed_event;
 	dev->mode_config.delayed_event = false;
@@ -550,7 +553,11 @@ EXPORT_SYMBOL(drm_kms_helper_poll_init);
  */
 void drm_kms_helper_poll_fini(struct drm_device *dev)
 {
-	drm_kms_helper_poll_disable(dev);
+	if (!dev->mode_config.poll_enabled)
+		return;
+
+	dev->mode_config.poll_enabled = false;
+	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
 }
 EXPORT_SYMBOL(drm_kms_helper_poll_fini);
 
Signature · 1 line
2.20.1
author maintainer
#21 lore raw

PATCH 21/129 xfs: dont crash on null attr fork xfs_bmapi_read

In reply to Greg Kroah-Hartman

From: Darrick J. Wong <[email protected]>

[ Upstream commit 8612de3f7ba6e900465e340516b8313806d27b2d ]

Zorro Lang reported a crash in generic/475 if we try to inactivate a corrupt inode with a NULL attr fork (stack trace shortened somewhat):

RIP: 0010:xfs_bmapi_read+0x311/0xb00 [xfs]
RSP: 0018:ffff888047f9ed68 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888047f9f038 RCX: 1ffffffff5f99f51
RDX: 0000000000000002 RSI: 0000000000000008 RDI: 0000000000000012
RBP: ffff888002a41f00 R08: ffffed10005483f0 R09: ffffed10005483ef
R10: ffffed10005483ef R11: ffff888002a41f7f R12: 0000000000000004
R13: ffffe8fff53b5768 R14: 0000000000000005 R15: 0000000000000001
FS:  00007f11d44b5b80(0000) GS:ffff888114200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000ef6000 CR3: 000000002e176003 CR4: 00000000001606e0
Call Trace:
 xfs_dabuf_map.constprop.18+0x696/0xe50 [xfs]
 xfs_da_read_buf+0xf5/0x2c0 [xfs]
 xfs_da3_node_read+0x1d/0x230 [xfs]
 xfs_attr_inactive+0x3cc/0x5e0 [xfs]
 xfs_inactive+0x4c8/0x5b0 [xfs]
 xfs_fs_destroy_inode+0x31b/0x8e0 [xfs]
 destroy_inode+0xbc/0x190
 xfs_bulkstat_one_int+0xa8c/0x1200 [xfs]
 xfs_bulkstat_one+0x16/0x20 [xfs]
 xfs_bulkstat+0x6fa/0xf20 [xfs]
 xfs_ioc_bulkstat+0x182/0x2b0 [xfs]
 xfs_file_ioctl+0xee0/0x12a0 [xfs]
 do_vfs_ioctl+0x193/0x1000
 ksys_ioctl+0x60/0x90
 __x64_sys_ioctl+0x6f/0xb0
 do_syscall_64+0x9f/0x4d0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f11d39a3e5b

The "obvious" cause is that the attr ifork is null despite the inode claiming an attr fork having at least one extent, but it's not so obvious why we ended up with an inode in that state.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204031

---
 fs/xfs/libxfs/xfs_bmap.c | 29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)
fs/xfs/libxfs/xfs_bmap.c +21 -8
index 8ad65d43b65d8..d34085bf4a40b 100644
@@ -4212,15 +4212,28 @@ xfs_bmapi_read(
 	XFS_STATS_INC(mp, xs_blk_mapr);
 
 	ifp = XFS_IFORK_PTR(ip, whichfork);
+	if (!ifp) {
+		/* No CoW fork?  Return a hole. */
+		if (whichfork == XFS_COW_FORK) {
+			mval->br_startoff = bno;
+			mval->br_startblock = HOLESTARTBLOCK;
+			mval->br_blockcount = len;
+			mval->br_state = XFS_EXT_NORM;
+			*nmap = 1;
+			return 0;
+		}
 
-	/* No CoW fork?  Return a hole. */
-	if (whichfork == XFS_COW_FORK && !ifp) {
-		mval->br_startoff = bno;
-		mval->br_startblock = HOLESTARTBLOCK;
-		mval->br_blockcount = len;
-		mval->br_state = XFS_EXT_NORM;
-		*nmap = 1;
-		return 0;
+		/*
+		 * A missing attr ifork implies that the inode says we're in
+		 * extents or btree format but failed to pass the inode fork
+		 * verifier while trying to load it.  Treat that as a file
+		 * corruption too.
+		 */
+#ifdef DEBUG
+		xfs_alert(mp, "%s: inode %llu missing fork %d",
+				__func__, ip->i_ino, whichfork);
+#endif /* DEBUG */
+		return -EFSCORRUPTED;
 	}
 
 	if (!(ifp->if_flags & XFS_IFEXTENTS)) {
Signature · 1 line
2.20.1
author maintainer
#22 lore raw

PATCH 22/129 Bluetooth: btrtl: Additional Realtek 8822CE Bluetooth devices

In reply to Greg Kroah-Hartman

From: Jian-Hong Pan <[email protected]>

[ Upstream commit 6d0762b19c5963ff9e178e8af3626532ee04d93d ]

The ASUS X412FA laptop contains a Realtek RTL8822CE device with an associated BT chip using a USB ID of 04ca:4005. This ID is added to the driver.

The /sys/kernel/debug/usb/devices portion for this device is:

T:  Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#=  4 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04ca ProdID=4005 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
---
 drivers/bluetooth/btusb.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/bluetooth/btusb.c +3 -0
@@ -362,6 +362,9 @@ static const struct usb_device_id blackl
 	/* Additional Realtek 8822BE Bluetooth devices */
 	{ USB_DEVICE(0x0b05, 0x185c), .driver_info = BTUSB_REALTEK },
 
+	/* Additional Realtek 8822CE Bluetooth devices */
+	{ USB_DEVICE(0x04ca, 0x4005), .driver_info = BTUSB_REALTEK },
+
 	/* Silicon Wave based devices */
 	{ USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_SWAVE },
 
author maintainer
#23 lore raw

PATCH 23/129 arcnet: provide a buffer big enough to actually receive packets

In reply to Greg Kroah-Hartman

From: Uwe Kleine-König <[email protected]>

[ Upstream commit 108639aac35eb57f1d0e8333f5fc8c7ff68df938 ]

struct archdr is only big enough to hold the header of various types of arcnet packets. So to provide enough space to hold the data read from hardware provide a buffer large enough to hold a packet with maximal size.

The problem was noticed by the stack protector which makes the kernel oops.

---
 drivers/net/arcnet/arcnet.c |   31 +++++++++++++++++--------------
 1 file changed, 17 insertions(+), 14 deletions(-)
drivers/net/arcnet/arcnet.c +17 -14
@@ -1009,31 +1009,34 @@ EXPORT_SYMBOL(arcnet_interrupt);
 static void arcnet_rx(struct net_device *dev, int bufnum)
 {
 	struct arcnet_local *lp = netdev_priv(dev);
-	struct archdr pkt;
+	union {
+		struct archdr pkt;
+		char buf[512];
+	} rxdata;
 	struct arc_rfc1201 *soft;
 	int length, ofs;
 
-	soft = &pkt.soft.rfc1201;
+	soft = &rxdata.pkt.soft.rfc1201;
 
-	lp->hw.copy_from_card(dev, bufnum, 0, &pkt, ARC_HDR_SIZE);
-	if (pkt.hard.offset[0]) {
-		ofs = pkt.hard.offset[0];
+	lp->hw.copy_from_card(dev, bufnum, 0, &rxdata.pkt, ARC_HDR_SIZE);
+	if (rxdata.pkt.hard.offset[0]) {
+		ofs = rxdata.pkt.hard.offset[0];
 		length = 256 - ofs;
 	} else {
-		ofs = pkt.hard.offset[1];
+		ofs = rxdata.pkt.hard.offset[1];
 		length = 512 - ofs;
 	}
 
 	/* get the full header, if possible */
-	if (sizeof(pkt.soft) <= length) {
-		lp->hw.copy_from_card(dev, bufnum, ofs, soft, sizeof(pkt.soft));
+	if (sizeof(rxdata.pkt.soft) <= length) {
+		lp->hw.copy_from_card(dev, bufnum, ofs, soft, sizeof(rxdata.pkt.soft));
 	} else {
-		memset(&pkt.soft, 0, sizeof(pkt.soft));
+		memset(&rxdata.pkt.soft, 0, sizeof(rxdata.pkt.soft));
 		lp->hw.copy_from_card(dev, bufnum, ofs, soft, length);
 	}
 
 	arc_printk(D_DURING, dev, "Buffer #%d: received packet from %02Xh to %02Xh (%d+4 bytes)\n",
-		   bufnum, pkt.hard.source, pkt.hard.dest, length);
+		   bufnum, rxdata.pkt.hard.source, rxdata.pkt.hard.dest, length);
 
 	dev->stats.rx_packets++;
 	dev->stats.rx_bytes += length + ARC_HDR_SIZE;
@@ -1042,13 +1045,13 @@ static void arcnet_rx(struct net_device
 	if (arc_proto_map[soft->proto]->is_ip) {
 		if (BUGLVL(D_PROTO)) {
 			struct ArcProto
-			*oldp = arc_proto_map[lp->default_proto[pkt.hard.source]],
+			*oldp = arc_proto_map[lp->default_proto[rxdata.pkt.hard.source]],
 			*newp = arc_proto_map[soft->proto];
 
 			if (oldp != newp) {
 				arc_printk(D_PROTO, dev,
 					   "got protocol %02Xh; encap for host %02Xh is now '%c' (was '%c')\n",
-					   soft->proto, pkt.hard.source,
+					   soft->proto, rxdata.pkt.hard.source,
 					   newp->suffix, oldp->suffix);
 			}
 		}
@@ -1057,10 +1060,10 @@ static void arcnet_rx(struct net_device
 		lp->default_proto[0] = soft->proto;
 
 		/* in striking contrast, the following isn't a hack. */
-		lp->default_proto[pkt.hard.source] = soft->proto;
+		lp->default_proto[rxdata.pkt.hard.source] = soft->proto;
 	}
 	/* call the protocol-specific receiver. */
-	arc_proto_map[soft->proto]->rx(dev, bufnum, &pkt, length);
+	arc_proto_map[soft->proto]->rx(dev, bufnum, &rxdata.pkt, length);
 }
 
 static void null_rx(struct net_device *dev, int bufnum,
author maintainer
#24 lore raw

PATCH 24/129 cdc_ncm: fix divide-by-zero caused by invalid wMaxPacketSize

In reply to Greg Kroah-Hartman

From: Bjørn Mork <[email protected]>

[ Upstream commit 3fe4b3351301660653a2bc73f2226da0ebd2b95e ]

Endpoints with zero wMaxPacketSize are not usable for transferring data. Ignore such endpoints when looking for valid in, out and status pipes, to make the driver more robust against invalid and meaningless descriptors.

The wMaxPacketSize of the out pipe is used as divisor. So this change fixes a divide-by-zero bug.

---
 drivers/net/usb/cdc_ncm.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/net/usb/cdc_ncm.c +5 -1
@@ -679,8 +679,12 @@ cdc_ncm_find_endpoints(struct usbnet *de
 	u8 ep;
 
 	for (ep = 0; ep < intf->cur_altsetting->desc.bNumEndpoints; ep++) {
-
 		e = intf->cur_altsetting->endpoint + ep;
+
+		/* ignore endpoints which cannot transfer data */
+		if (!usb_endpoint_maxp(&e->desc))
+			continue;
+
 		switch (e->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
 		case USB_ENDPOINT_XFER_INT:
 			if (usb_endpoint_dir_in(&e->desc)) {
author maintainer
#25 lore raw

PATCH 25/129 macsec: drop skb sk before calling gro_cells_receive

In reply to Greg Kroah-Hartman

From: Xin Long <[email protected]>

[ Upstream commit ba56d8ce38c8252fff5b745db3899cf092578ede ]

Fei Liu reported a crash when doing netperf on a topo of macsec dev over veth:

  [  448.919128] refcount_t: underflow; use-after-free.
  [  449.090460] Call trace:
  [  449.092895]  refcount_sub_and_test+0xb4/0xc0
  [  449.097155]  tcp_wfree+0x2c/0x150
  [  449.100460]  ip_rcv+0x1d4/0x3a8
  [  449.103591]  __netif_receive_skb_core+0x554/0xae0
  [  449.108282]  __netif_receive_skb+0x28/0x78
  [  449.112366]  netif_receive_skb_internal+0x54/0x100
  [  449.117144]  napi_gro_complete+0x70/0xc0
  [  449.121054]  napi_gro_flush+0x6c/0x90
  [  449.124703]  napi_complete_done+0x50/0x130
  [  449.128788]  gro_cell_poll+0x8c/0xa8
  [  449.132351]  net_rx_action+0x16c/0x3f8
  [  449.136088]  __do_softirq+0x128/0x320

The issue was caused by skb's true_size changed without its sk's sk_wmem_alloc increased in tcp/skb_gro_receive(). Later when the skb is being freed and the skb's truesize is subtracted from its sk's sk_wmem_alloc in tcp_wfree(), underflow occurs.

macsec is calling gro_cells_receive() to receive a packet, which actually requires skb->sk to be NULL. However when macsec dev is over veth, it's possible the skb->sk is still set if the skb was not unshared or expanded from the peer veth.

ip_rcv() is calling skb_orphan() to drop the skb's sk for tproxy, but it is too late for macsec's calling gro_cells_receive(). So fix it by dropping the skb's sk earlier on rx path of macsec.

Fixes 5491e7c6b1a9 ("macsec: enable GRO and RPS on macsec devices")
---
 drivers/net/macsec.c |    1 +
 1 file changed, 1 insertion(+)
drivers/net/macsec.c +1 -0
@@ -1240,6 +1240,7 @@ deliver:
 		macsec_rxsa_put(rx_sa);
 	macsec_rxsc_put(rx_sc);
 
+	skb_orphan(skb);
 	ret = gro_cells_receive(&macsec->gro_cells, skb);
 	if (ret == NET_RX_SUCCESS)
 		count_rx(dev, skb->len);
author maintainer
#26 lore raw

PATCH 26/129 net/phy: fix DP83865 10 Mbps HDX loopback disable function

In reply to Greg Kroah-Hartman

From: Peter Mamonov <[email protected]>

[ Upstream commit e47488b2df7f9cb405789c7f5d4c27909fc597ae ]

According to the DP83865 datasheet "the 10 Mbps HDX loopback can be disabled in the expanded memory register 0x1C0.1". The driver erroneously used bit 0 instead of bit 1.

Fixes 4621bf129856 ("phy: Add file missed in previous commit.")
---
 drivers/net/phy/national.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/net/phy/national.c +6 -3
@@ -110,14 +110,17 @@ static void ns_giga_speed_fallback(struc
 
 static void ns_10_base_t_hdx_loopack(struct phy_device *phydev, int disable)
 {
+	u16 lb_dis = BIT(1);
+
 	if (disable)
-		ns_exp_write(phydev, 0x1c0, ns_exp_read(phydev, 0x1c0) | 1);
+		ns_exp_write(phydev, 0x1c0,
+			     ns_exp_read(phydev, 0x1c0) | lb_dis);
 	else
 		ns_exp_write(phydev, 0x1c0,
-			     ns_exp_read(phydev, 0x1c0) & 0xfffe);
+			     ns_exp_read(phydev, 0x1c0) & ~lb_dis);
 
 	pr_debug("10BASE-T HDX loopback %s\n",
-		 (ns_exp_read(phydev, 0x1c0) & 0x0001) ? "off" : "on");
+		 (ns_exp_read(phydev, 0x1c0) & lb_dis) ? "off" : "on");
 }
 
 static int ns_config_init(struct phy_device *phydev)
author maintainer
#27 lore raw

PATCH 27/129 net: qrtr: Stop rx_worker before freeing node

In reply to Greg Kroah-Hartman

From: Bjorn Andersson <[email protected]>

[ Upstream commit 73f0c11d11329a0d6d205d4312b6e5d2512af7c5 ]

As the endpoint is unregistered there might still be work pending to handle incoming messages, which will result in a use after free scenario. The plan is to remove the rx_worker, but until then (and for stable@) ensure that the work is stopped before the node is freed.

Fixes bdabad3e363d ("net: Add Qualcomm IPC router")
---
 net/qrtr/qrtr.c |    1 +
 1 file changed, 1 insertion(+)
net/qrtr/qrtr.c +1 -0
@@ -126,6 +126,7 @@ static void __qrtr_node_release(struct k
 	list_del(&node->item);
 	mutex_unlock(&qrtr_node_lock);
 
+	cancel_work_sync(&node->work);
 	skb_queue_purge(&node->rx_queue);
 	kfree(node);
 }
author maintainer
#28 lore raw

PATCH 28/129 openvswitch: change type of UPCALL_PID attribute to NLA_UNSPEC

In reply to Greg Kroah-Hartman

From: Li RongQing <[email protected]>

[ Upstream commit ea8564c865299815095bebeb4b25bef474218e4c ]

userspace openvswitch patch "(dpif-linux: Implement the API functions to allow multiple handler threads read upcall)" changes its type from U32 to UNSPEC, but leave the kernel unchanged

and after kernel 6e237d099fac "(netlink: Relax attr validation for fixed length types)", this bug is exposed by the below warning

	[   57.215841] netlink: 'ovs-vswitchd': attribute type 5 has an invalid length.
Fixes 5cd667b0a456 ("openvswitch: Allow each vport to have an array of 'port_id's")
---
 net/openvswitch/datapath.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/openvswitch/datapath.c +1 -1
@@ -2218,7 +2218,7 @@ static const struct nla_policy vport_pol
 	[OVS_VPORT_ATTR_STATS] = { .len = sizeof(struct ovs_vport_stats) },
 	[OVS_VPORT_ATTR_PORT_NO] = { .type = NLA_U32 },
 	[OVS_VPORT_ATTR_TYPE] = { .type = NLA_U32 },
-	[OVS_VPORT_ATTR_UPCALL_PID] = { .type = NLA_U32 },
+	[OVS_VPORT_ATTR_UPCALL_PID] = { .type = NLA_UNSPEC },
 	[OVS_VPORT_ATTR_OPTIONS] = { .type = NLA_NESTED },
 };
 
author maintainer
#29 lore raw

PATCH 29/129 ppp: Fix memory leak in ppp_write

In reply to Greg Kroah-Hartman

From: Takeshi Misawa <[email protected]>

[ Upstream commit 4c247de564f1ff614d11b3bb5313fb70d7b9598b ]

When ppp is closing, __ppp_xmit_process() failed to enqueue skb and skb allocated in ppp_write() is leaked.

syzbot reported :

BUG: memory leak
unreferenced object 0xffff88812a17bc00 (size 224):
  comm "syz-executor673", pid 6952, jiffies 4294942888 (age 13.040s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000d110fff9>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
    [<00000000d110fff9>] slab_post_alloc_hook mm/slab.h:522 [inline]
    [<00000000d110fff9>] slab_alloc_node mm/slab.c:3262 [inline]
    [<00000000d110fff9>] kmem_cache_alloc_node+0x163/0x2f0 mm/slab.c:3574
    [<000000002d616113>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:197
    [<000000000167fc45>] alloc_skb include/linux/skbuff.h:1055 [inline]
    [<000000000167fc45>] ppp_write+0x48/0x120 drivers/net/ppp/ppp_generic.c:502
    [<000000009ab42c0b>] __vfs_write+0x43/0xa0 fs/read_write.c:494
    [<00000000086b2e22>] vfs_write fs/read_write.c:558 [inline]
    [<00000000086b2e22>] vfs_write+0xee/0x210 fs/read_write.c:542
    [<00000000a2b70ef9>] ksys_write+0x7c/0x130 fs/read_write.c:611
    [<00000000ce5e0fdd>] __do_sys_write fs/read_write.c:623 [inline]
    [<00000000ce5e0fdd>] __se_sys_write fs/read_write.c:620 [inline]
    [<00000000ce5e0fdd>] __x64_sys_write+0x1e/0x30 fs/read_write.c:620
    [<00000000d9d7b370>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:296
    [<0000000006e6d506>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this by freeing skb, if ppp is closing.

Fixes 6d066734e9f0 ("ppp: avoid loop in xmit recursion detection code")
Reported-and-tested-by [email protected]
---
 drivers/net/ppp/ppp_generic.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/net/ppp/ppp_generic.c +2 -0
@@ -1432,6 +1432,8 @@ static void __ppp_xmit_process(struct pp
 			netif_wake_queue(ppp->dev);
 		else
 			netif_stop_queue(ppp->dev);
+	} else {
+		kfree_skb(skb);
 	}
 	ppp_xmit_unlock(ppp);
 }
author maintainer
#30 lore raw

PATCH 30/129 sch_netem: fix a divide by zero in tabledist()

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit b41d936b5ecfdb3a4abc525ce6402a6c49cffddc ]

syzbot managed to crash the kernel in tabledist() loading an empty distribution table.

	t = dist->table[rnd % dist->size];

Simply return an error when such load is attempted.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/sched/sch_netem.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/sched/sch_netem.c +1 -1
@@ -711,7 +711,7 @@ static int get_dist_table(struct Qdisc *
 	int i;
 	size_t s;
 
-	if (n > NETEM_DIST_MAX)
+	if (!n || n > NETEM_DIST_MAX)
 		return -EINVAL;
 
 	s = sizeof(struct disttable) + n * sizeof(s16);
author maintainer
#31 lore raw

PATCH 31/129 skge: fix checksum byte order

In reply to Greg Kroah-Hartman

From: Stephen Hemminger <[email protected]>

[ Upstream commit 5aafeb74b5bb65b34cc87c7623f9fa163a34fa3b ]

Running old skge driver on PowerPC causes checksum errors because hardware reported 1's complement checksum is in little-endian byte order.

---
 drivers/net/ethernet/marvell/skge.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/marvell/skge.c +1 -1
@@ -3114,7 +3114,7 @@ static struct sk_buff *skge_rx_get(struc
 	skb_put(skb, len);
 
 	if (dev->features & NETIF_F_RXCSUM) {
-		skb->csum = csum;
+		skb->csum = le16_to_cpu(csum);
 		skb->ip_summed = CHECKSUM_COMPLETE;
 	}
 
author maintainer
#32 lore raw

PATCH 32/129 usbnet: ignore endpoints with invalid wMaxPacketSize

In reply to Greg Kroah-Hartman

From: Bjørn Mork <[email protected]>

[ Upstream commit 8d3d7c2029c1b360f1a6b0a2fca470b57eb575c0 ]

Endpoints with zero wMaxPacketSize are not usable for transferring data. Ignore such endpoints when looking for valid in, out and status pipes, to make the drivers more robust against invalid and meaningless descriptors.

The wMaxPacketSize of these endpoints are used for memory allocations and as divisors in many usbnet minidrivers. Avoiding zero is therefore critical.

---
 drivers/net/usb/usbnet.c |    5 +++++
 1 file changed, 5 insertions(+)
drivers/net/usb/usbnet.c +5 -0
@@ -114,6 +114,11 @@ int usbnet_get_endpoints(struct usbnet *
 			int				intr = 0;
 
 			e = alt->endpoint + ep;
+
+			/* ignore endpoints which cannot transfer data */
+			if (!usb_endpoint_maxp(&e->desc))
+				continue;
+
 			switch (e->desc.bmAttributes) {
 			case USB_ENDPOINT_XFER_INT:
 				if (!usb_endpoint_dir_in(&e->desc))
author maintainer
#33 lore raw

PATCH 33/129 usbnet: sanity checking of packet sizes and device mtu

In reply to Greg Kroah-Hartman

From: Oliver Neukum <[email protected]>

[ Upstream commit 280ceaed79f18db930c0cc8bb21f6493490bf29c ]

After a reset packet sizes and device mtu can change and need to be reevaluated to calculate queue sizes. Malicious devices can set this to zero and we divide by it. Introduce sanity checking.

---
 drivers/net/usb/usbnet.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/net/usb/usbnet.c +3 -0
@@ -354,6 +354,8 @@ void usbnet_update_max_qlen(struct usbne
 {
 	enum usb_device_speed speed = dev->udev->speed;
 
+	if (!dev->rx_urb_size || !dev->hard_mtu)
+		goto insanity;
 	switch (speed) {
 	case USB_SPEED_HIGH:
 		dev->rx_qlen = MAX_QUEUE_MEMORY / dev->rx_urb_size;
@@ -370,6 +372,7 @@ void usbnet_update_max_qlen(struct usbne
 		dev->tx_qlen = 5 * MAX_QUEUE_MEMORY / dev->hard_mtu;
 		break;
 	default:
+insanity:
 		dev->rx_qlen = dev->tx_qlen = 4;
 	}
 }
author maintainer
#34 lore raw

PATCH 34/129 mISDN: enforce CAP_NET_RAW for raw sockets

In reply to Greg Kroah-Hartman

From: Ori Nimron <[email protected]>

[ Upstream commit b91ee4aa2a2199ba4d4650706c272985a5a32d80 ]

When creating a raw AF_ISDN socket, CAP_NET_RAW needs to be checked first.

---
 drivers/isdn/mISDN/socket.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/isdn/mISDN/socket.c +2 -0
@@ -766,6 +766,8 @@ base_sock_create(struct net *net, struct
 
 	if (sock->type != SOCK_RAW)
 		return -ESOCKTNOSUPPORT;
+	if (!capable(CAP_NET_RAW))
+		return -EPERM;
 
 	sk = sk_alloc(net, PF_ISDN, GFP_KERNEL, &mISDN_proto, kern);
 	if (!sk)
author maintainer
#35 lore raw

PATCH 35/129 appletalk: enforce CAP_NET_RAW for raw sockets

In reply to Greg Kroah-Hartman

From: Ori Nimron <[email protected]>

[ Upstream commit 6cc03e8aa36c51f3b26a0d21a3c4ce2809c842ac ]

When creating a raw AF_APPLETALK socket, CAP_NET_RAW needs to be checked first.

---
 net/appletalk/ddp.c |    5 +++++
 1 file changed, 5 insertions(+)
net/appletalk/ddp.c +5 -0
@@ -1029,6 +1029,11 @@ static int atalk_create(struct net *net,
 	 */
 	if (sock->type != SOCK_RAW && sock->type != SOCK_DGRAM)
 		goto out;
+
+	rc = -EPERM;
+	if (sock->type == SOCK_RAW && !kern && !capable(CAP_NET_RAW))
+		goto out;
+
 	rc = -ENOMEM;
 	sk = sk_alloc(net, PF_APPLETALK, GFP_KERNEL, &ddp_proto, kern);
 	if (!sk)
author maintainer
#36 lore raw

PATCH 36/129 ax25: enforce CAP_NET_RAW for raw sockets

In reply to Greg Kroah-Hartman

From: Ori Nimron <[email protected]>

[ Upstream commit 0614e2b73768b502fc32a75349823356d98aae2c ]

When creating a raw AF_AX25 socket, CAP_NET_RAW needs to be checked first.

---
 net/ax25/af_ax25.c |    2 ++
 1 file changed, 2 insertions(+)
net/ax25/af_ax25.c +2 -0
@@ -859,6 +859,8 @@ static int ax25_create(struct net *net,
 		break;
 
 	case SOCK_RAW:
+		if (!capable(CAP_NET_RAW))
+			return -EPERM;
 		break;
 	default:
 		return -ESOCKTNOSUPPORT;
author maintainer
#37 lore raw

PATCH 37/129 ieee802154: enforce CAP_NET_RAW for raw sockets

In reply to Greg Kroah-Hartman

From: Ori Nimron <[email protected]>

[ Upstream commit e69dbd4619e7674c1679cba49afd9dd9ac347eef ]

When creating a raw AF_IEEE802154 socket, CAP_NET_RAW needs to be checked first.

---
 net/ieee802154/socket.c |    3 +++
 1 file changed, 3 insertions(+)
net/ieee802154/socket.c +3 -0
@@ -1003,6 +1003,9 @@ static int ieee802154_create(struct net
 
 	switch (sock->type) {
 	case SOCK_RAW:
+		rc = -EPERM;
+		if (!capable(CAP_NET_RAW))
+			goto out;
 		proto = &ieee802154_raw_prot;
 		ops = &ieee802154_raw_ops;
 		break;
author maintainer
#38 lore raw

PATCH 38/129 nfc: enforce CAP_NET_RAW for raw sockets

In reply to Greg Kroah-Hartman

From: Ori Nimron <[email protected]>

[ Upstream commit 3a359798b176183ef09efb7a3dc59abad1cc7104 ]

When creating a raw AF_NFC socket, CAP_NET_RAW needs to be checked first.

---
 net/nfc/llcp_sock.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
net/nfc/llcp_sock.c +5 -2
@@ -1011,10 +1011,13 @@ static int llcp_sock_create(struct net *
 	    sock->type != SOCK_RAW)
 		return -ESOCKTNOSUPPORT;
 
-	if (sock->type == SOCK_RAW)
+	if (sock->type == SOCK_RAW) {
+		if (!capable(CAP_NET_RAW))
+			return -EPERM;
 		sock->ops = &llcp_rawsock_ops;
-	else
+	} else {
 		sock->ops = &llcp_sock_ops;
+	}
 
 	sk = nfc_llcp_sock_alloc(sock, sock->type, GFP_ATOMIC, kern);
 	if (sk == NULL)
author maintainer
#39 lore raw

PATCH 39/129 ALSA: hda: Flush interrupts on disabling

In reply to Greg Kroah-Hartman

From: Chris Wilson <[email protected]>

[ Upstream commit caa8422d01e983782548648e125fd617cadcec3f ]

I was looking at

<4> [241.835158] general protection fault: 0000 [#1] PREEMPT SMP PTI
<4> [241.835181] CPU: 1 PID: 214 Comm: kworker/1:3 Tainted: G U 5.2.0-CI-CI_DRM_6509+ #1
<4> [241.835199] Hardware name: Dell Inc. OptiPlex 745 /0GW726, BIOS 2.3.1 05/21/2007
<4> [241.835234] Workqueue: events snd_hdac_bus_process_unsol_events [snd_hda_core]
<4> [241.835256] RIP: 0010:input_handle_event+0x16d/0x5e0
<4> [241.835270] Code: 48 8b 93 58 01 00 00 8b 52 08 89 50 04 8b 83 f8 06 00 00 48 8b 93 00 07 00 00 8d 70 01 48 8d 04 c2 83 e1 08 89 b3 f8 06 00 00 <66> 89 28 66 44 89 60 02 44 89 68 04 8b 93 f8 06 00 00 0f 84 fd fe <4> [241.835304] RSP: 0018:ffffc9000019fda0 EFLAGS: 00010046
<4> [241.835317] RAX: 6b6b6b6ec6c6c6c3 RBX: ffff8880290fefc8 RCX: 0000000000000000
<4> [241.835332] RDX: 000000006b6b6b6b RSI: 000000006b6b6b6c RDI: 0000000000000046
<4> [241.835347] RBP: 0000000000000005 R08: 0000000000000000 R09: 0000000000000001
<4> [241.835362] R10: ffffc9000019faa0 R11: 0000000000000000 R12: 0000000000000004
<4> [241.835377] R13: 0000000000000000 R14: ffff8880290ff1d0 R15: 0000000000000293
<4> [241.835392] FS: 0000000000000000(0000) GS:ffff88803de80000(0000) knlGS:0000000000000000
<4> [241.835409] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [241.835422] CR2: 00007ffe9a99e9b7 CR3: 000000002f588000 CR4: 00000000000006e0
<4> [241.835436] Call Trace:

<4> [241.835449]  input_event+0x45/0x70
<4> [241.835464]  snd_jack_report+0xdc/0x100
<4> [241.835490]  snd_hda_jack_report_sync+0x83/0xc0 [snd_hda_codec]
<4> [241.835512]  snd_hdac_bus_process_unsol_events+0x5a/0x70 [snd_hda_core]
<4> [241.835530]  process_one_work+0x245/0x610

which has the hallmarks of a worker queued from interrupt after it was supposedly cancelled (note the POISON_FREE), and I could not see where the interrupt would be flushed on shutdown so added the likely suspects.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111174

---
 sound/hda/hdac_controller.c | 2 ++
 sound/pci/hda/hda_intel.c   | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)
sound/hda/hdac_controller.c +2 -0
index 00c6af2ae1c29..433f3280f7098 100644
@@ -441,6 +441,8 @@ static void azx_int_disable(struct hdac_bus *bus)
 	list_for_each_entry(azx_dev, &bus->stream_list, list)
 		snd_hdac_stream_updateb(azx_dev, SD_CTL, SD_INT_MASK, 0);
 
+	synchronize_irq(bus->irq);
+
 	/* disable SIE for all streams */
 	snd_hdac_chip_writeb(bus, INTCTL, 0);
 
sound/pci/hda/hda_intel.c +1 -1
index f2f1d9fd848c8..3d4ea5fd75bf5 100644
@@ -1239,9 +1239,9 @@ static int azx_free(struct azx *chip)
 	}
 
 	if (bus->chip_init) {
+		azx_stop_chip(chip);
 		azx_clear_irq_pending(chip);
 		azx_stop_all_streams(chip);
-		azx_stop_chip(chip);
 	}
 
 	if (bus->irq >= 0)
Signature · 1 line
2.20.1
author maintainer
#40 lore raw

PATCH 40/129 regulator: lm363x: Fix off-by-one n_voltages for lm3632 ldo_vpos/ldo_vneg

In reply to Greg Kroah-Hartman

From: Axel Lin <[email protected]>

[ Upstream commit 1e2cc8c5e0745b545d4974788dc606d678b6e564 ]

According to the datasheet https://www.ti.com/lit/ds/symlink/lm3632a.pdf
Table 20. VPOS Bias Register Field Descriptions VPOS[5:0] Sets the Positive Display Bias (LDO) Voltage (50 mV per step) 000000: 4 V
000001: 4.05 V
000010: 4.1 V
....................
011101: 5.45 V
011110: 5.5 V (Default)
011111: 5.55 V
....................
100111: 5.95 V
101000: 6 V
Note: Codes 101001 to 111111 map to 6 V

The LM3632_LDO_VSEL_MAX should be 0b101000 (0x28), so the maximum voltage can match the datasheet.

Fixes 3a8d1a73a037 ("regulator: add LM363X driver")
---
 drivers/regulator/lm363x-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/regulator/lm363x-regulator.c +1 -1
index f53e63301a205..e71117d7217bc 100644
@@ -33,7 +33,7 @@
 
 /* LM3632 */
 #define LM3632_BOOST_VSEL_MAX		0x26
-#define LM3632_LDO_VSEL_MAX		0x29
+#define LM3632_LDO_VSEL_MAX		0x28
 #define LM3632_VBOOST_MIN		4500000
 #define LM3632_VLDO_MIN			4000000
 
Signature · 1 line
2.20.1
author maintainer
#41 lore raw

PATCH 41/129 ASoC: sgtl5000: Fix charge pump source assignment

In reply to Greg Kroah-Hartman

From: Oleksandr Suvorov <[email protected]>

[ Upstream commit b6319b061ba279577fd7030a9848fbd6a17151e3 ]

If VDDA != VDDIO and any of them is greater than 3.1V, charge pump source can be assigned automatically [1].

[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf

---
 sound/soc/codecs/sgtl5000.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)
sound/soc/codecs/sgtl5000.c +10 -5
index 3dba5550a6659..d81ac4e499aab 100644
@@ -987,12 +987,17 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
 					SGTL5000_INT_OSC_EN);
 		/* Enable VDDC charge pump */
 		ana_pwr |= SGTL5000_VDDC_CHRGPMP_POWERUP;
-	} else if (vddio >= 3100 && vdda >= 3100) {
+	} else {
 		ana_pwr &= ~SGTL5000_VDDC_CHRGPMP_POWERUP;
-		/* VDDC use VDDIO rail */
-		lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
-		lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
-			    SGTL5000_VDDC_MAN_ASSN_SHIFT;
+		/*
+		 * if vddio == vdda the source of charge pump should be
+		 * assigned manually to VDDIO
+		 */
+		if (vddio == vdda) {
+			lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
+			lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
+				    SGTL5000_VDDC_MAN_ASSN_SHIFT;
+		}
 	}
 
 	snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL, lreg_ctrl);
Signature · 1 line
2.20.1
author maintainer
#42 lore raw

PATCH 42/129 dmaengine: bcm2835: Print error in case setting DMA mask fails

In reply to Greg Kroah-Hartman

From: Stefan Wahren <[email protected]>

[ Upstream commit 72503b25ee363827aafffc3e8d872e6a92a7e422 ]

During enabling of the RPi 4, we found out that the driver doesn't provide a helpful error message in case setting DMA mask fails. So add one.

---
 drivers/dma/bcm2835-dma.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/dma/bcm2835-dma.c +3 -1
index 6ba53bbd0e161..b984d00bc0558 100644
@@ -891,8 +891,10 @@ static int bcm2835_dma_probe(struct platform_device *pdev)
 		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
 
 	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
-	if (rc)
+	if (rc) {
+		dev_err(&pdev->dev, "Unable to set DMA mask\n");
 		return rc;
+	}
 
 	od = devm_kzalloc(&pdev->dev, sizeof(*od), GFP_KERNEL);
 	if (!od)
Signature · 1 line
2.20.1
author maintainer
#43 lore raw

PATCH 43/129 leds: leds-lp5562 allow firmware files up to the maximum length

In reply to Greg Kroah-Hartman

From: Nick Stoughton <[email protected]>

[ Upstream commit ed2abfebb041473092b41527903f93390d38afa7 ]

Firmware files are in ASCII, using 2 hex characters per byte. The maximum length of a firmware string is therefore

16 (commands) * 2 (bytes per command) * 2 (characters per byte) = 64

Fixes ff45262a85db ("leds: add new LP5562 LED driver")
---
 drivers/leds/leds-lp5562.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/leds/leds-lp5562.c +5 -1
index b75333803a637..9f5e4d04efad5 100644
@@ -263,7 +263,11 @@ static void lp5562_firmware_loaded(struct lp55xx_chip *chip)
 {
 	const struct firmware *fw = chip->fw;
 
-	if (fw->size > LP5562_PROGRAM_LENGTH) {
+	/*
+	 * the firmware is encoded in ascii hex character, with 2 chars
+	 * per byte
+	 */
+	if (fw->size > (LP5562_PROGRAM_LENGTH * 2)) {
 		dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
 			fw->size);
 		return;
Signature · 1 line
2.20.1
author maintainer
#44 lore raw

PATCH 44/129 media: dib0700: fix link error for dibx000_i2c_set_speed

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

[ Upstream commit 765bb8610d305ee488b35d07e2a04ae52fb2df9c ]

When CONFIG_DVB_DIB9000 is disabled, we can still compile code that now fails to link against dibx000_i2c_set_speed:

drivers/media/usb/dvb-usb/dib0700_devices.o: In function `dib01x0_pmu_update.constprop.7':
dib0700_devices.c:(.text.unlikely+0x1c9c): undefined reference to `dibx000_i2c_set_speed'

The call sites are both through dib01x0_pmu_update(), which gets passed an 'i2c' pointer from dib9000_get_i2c_master(), which has returned NULL. Checking this pointer seems to be a good idea anyway, and it avoids the link failure in most cases.

Sean Young found another case that is not fixed by that, where certain gcc versions leave an unused function in place that causes the link error, but adding an explict IS_ENABLED() check also solves this.

Fixes b7f54910ce01 ("V4L/DVB (4647): Added module for DiB0700 based devices")
---
 drivers/media/usb/dvb-usb/dib0700_devices.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/media/usb/dvb-usb/dib0700_devices.c +8 -0
index 2868766893c85..c7c8fea0f1fa1 100644
@@ -2438,9 +2438,13 @@ static int dib9090_tuner_attach(struct dvb_usb_adapter *adap)
 		8, 0x0486,
 	};
 
+	if (!IS_ENABLED(CONFIG_DVB_DIB9000))
+		return -ENODEV;
 	if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &dib9090_dib0090_config) == NULL)
 		return -ENODEV;
 	i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
+	if (!i2c)
+		return -ENODEV;
 	if (dib01x0_pmu_update(i2c, data_dib190, 10) != 0)
 		return -ENODEV;
 	dib0700_set_i2c_speed(adap->dev, 1500);
@@ -2516,10 +2520,14 @@ static int nim9090md_tuner_attach(struct dvb_usb_adapter *adap)
 		0, 0x00ef,
 		8, 0x0406,
 	};
+	if (!IS_ENABLED(CONFIG_DVB_DIB9000))
+		return -ENODEV;
 	i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe);
 	if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &nim9090md_dib0090_config[0]) == NULL)
 		return -ENODEV;
 	i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
+	if (!i2c)
+		return -ENODEV;
 	if (dib01x0_pmu_update(i2c, data_dib190, 10) < 0)
 		return -ENODEV;
 
Signature · 1 line
2.20.1
author maintainer
#45 lore raw

PATCH 45/129 media: exynos4-is: fix leaked of_node references

In reply to Greg Kroah-Hartman

From: Wen Yang <[email protected]>

[ Upstream commit da79bf41a4d170ca93cc8f3881a70d734a071c37 ]

The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage.

Detected by coccinelle with the following warnings:
drivers/media/platform/exynos4-is/fimc-is.c:813:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 807, but without a corresponding object release within this function. drivers/media/platform/exynos4-is/fimc-is.c:870:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 807, but without a corresponding object release within this function. drivers/media/platform/exynos4-is/fimc-is.c:885:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 807, but without a corresponding object release within this function. drivers/media/platform/exynos4-is/media-dev.c:545:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 541, but without a corresponding object release within this function. drivers/media/platform/exynos4-is/media-dev.c:528:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 499, but without a corresponding object release within this function. drivers/media/platform/exynos4-is/media-dev.c:534:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 499, but without a corresponding object release within this function.

---
 drivers/media/platform/exynos4-is/fimc-is.c   | 1 +
 drivers/media/platform/exynos4-is/media-dev.c | 2 ++
 2 files changed, 3 insertions(+)
drivers/media/platform/exynos4-is/fimc-is.c +1 -0
index 7f92144a1de3a..f9456f26ff4fa 100644
@@ -819,6 +819,7 @@ static int fimc_is_probe(struct platform_device *pdev)
 		return -ENODEV;
 
 	is->pmu_regs = of_iomap(node, 0);
+	of_node_put(node);
 	if (!is->pmu_regs)
 		return -ENOMEM;
 
drivers/media/platform/exynos4-is/media-dev.c +2 -0
index 1a1154a9dfa49..ef6ccb5b89525 100644
@@ -494,6 +494,7 @@ static int fimc_md_register_sensor_entities(struct fimc_md *fmd)
 			continue;
 
 		ret = fimc_md_parse_port_node(fmd, port, index);
+		of_node_put(port);
 		if (ret < 0) {
 			of_node_put(node);
 			goto rpm_put;
@@ -527,6 +528,7 @@ static int __of_get_csis_id(struct device_node *np)
 	if (!np)
 		return -EINVAL;
 	of_property_read_u32(np, "reg", &reg);
+	of_node_put(np);
 	return reg - FIMC_INPUT_MIPI_CSI2_0;
 }
 
Signature · 1 line
2.20.1
author maintainer
#46 lore raw

PATCH 46/129 media: hdpvr: Add device num check and handling

In reply to Greg Kroah-Hartman

From: Luke Nowakowski-Krijger <[email protected]>

[ Upstream commit d4a6a9537bc32811486282206ecfb7c53754b74d ]

Add hdpvr device num check and error handling

We need to increment the device count atomically before we checkout a device to make sure that we do not reach the max count, otherwise we get out-of-bounds errors as reported by syzbot.

Reported-and-tested-by [email protected]
---
 drivers/media/usb/hdpvr/hdpvr-core.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
drivers/media/usb/hdpvr/hdpvr-core.c +11 -1
index a20b60ac66ca4..7b34108f6587e 100644
@@ -278,6 +278,7 @@ static int hdpvr_probe(struct usb_interface *interface,
 #endif
 	size_t buffer_size;
 	int i;
+	int dev_num;
 	int retval = -ENOMEM;
 
 	/* allocate memory for our device state and initialize it */
@@ -382,8 +383,17 @@ static int hdpvr_probe(struct usb_interface *interface,
 	}
 #endif
 
+	dev_num = atomic_inc_return(&dev_nr);
+	if (dev_num >= HDPVR_MAX) {
+		v4l2_err(&dev->v4l2_dev,
+			 "max device number reached, device register failed\n");
+		atomic_dec(&dev_nr);
+		retval = -ENODEV;
+		goto reg_fail;
+	}
+
 	retval = hdpvr_register_videodev(dev, &interface->dev,
-				    video_nr[atomic_inc_return(&dev_nr)]);
+				    video_nr[dev_num]);
 	if (retval < 0) {
 		v4l2_err(&dev->v4l2_dev, "registering videodev failed\n");
 		goto reg_fail;
Signature · 1 line
2.20.1
author maintainer
#47 lore raw

PATCH 47/129 sched/fair: Fix imbalance due to CPU affinity

In reply to Greg Kroah-Hartman

From: Vincent Guittot <[email protected]>

[ Upstream commit f6cad8df6b30a5d2bbbd2e698f74b4cafb9fb82b ]

The load_balance() has a dedicated mecanism to detect when an imbalance is due to CPU affinity and must be handled at parent level. In this case, the imbalance field of the parent's sched_group is set.

The description of sg_imbalanced() gives a typical example of two groups of 4 CPUs each and 4 tasks each with a cpumask covering 1 CPU of the first group and 3 CPUs of the second group. Something like:

	{ 0 1 2 3 } { 4 5 6 7 }
	        *     * * *

But the load_balance fails to fix this UC on my octo cores system made of 2 clusters of quad cores.

Whereas the load_balance is able to detect that the imbalanced is due to CPU affinity, it fails to fix it because the imbalance field is cleared before letting parent level a chance to run. In fact, when the imbalance is detected, the load_balance reruns without the CPU with pinned tasks. But there is no other running tasks in the situation described above and everything looks balanced this time so the imbalance field is immediately cleared.

The imbalance field should not be cleared if there is no other task to move when the imbalance is detected.

---
 kernel/sched/fair.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
kernel/sched/fair.c +3 -2
index b314feaf91f46..d8afae1bd5c5e 100644
@@ -7929,9 +7929,10 @@ static int load_balance(int this_cpu, struct rq *this_rq,
 out_balanced:
 	/*
 	 * We reach balance although we may have faced some affinity
-	 * constraints. Clear the imbalance flag if it was set.
+	 * constraints. Clear the imbalance flag only if other tasks got
+	 * a chance to move and fix the imbalance.
 	 */
-	if (sd_parent) {
+	if (sd_parent && !(env.flags & LBF_ALL_PINNED)) {
 		int *group_imbalance = &sd_parent->groups->sgc->imbalance;
 
 		if (*group_imbalance)
Signature · 1 line
2.20.1
author maintainer
#48 lore raw

PATCH 48/129 sched/core: Fix CPU controller for !RT_GROUP_SCHED

In reply to Greg Kroah-Hartman

From: Juri Lelli <[email protected]>

[ Upstream commit a07db5c0865799ebed1f88be0df50c581fb65029 ]

On !CONFIG_RT_GROUP_SCHED configurations it is currently not possible to move RT tasks between cgroups to which CPU controller has been attached; but it is oddly possible to first move tasks around and then make them RT (setschedule to FIFO/RR).

E.g.:

  # mkdir /sys/fs/cgroup/cpu,cpuacct/group1
  # chrt -fp 10 $$
  # echo $$ > /sys/fs/cgroup/cpu,cpuacct/group1/tasks
  bash: echo: write error: Invalid argument
  # chrt -op 0 $$
  # echo $$ > /sys/fs/cgroup/cpu,cpuacct/group1/tasks
  # chrt -fp 10 $$
  # cat /sys/fs/cgroup/cpu,cpuacct/group1/tasks
  2345
  2598
  # chrt -p 2345
  pid 2345's current scheduling policy: SCHED_FIFO
  pid 2345's current scheduling priority: 10

Also, as Michal noted, it is currently not possible to enable CPU controller on unified hierarchy with !CONFIG_RT_GROUP_SCHED (if there are any kernel RT threads in root cgroup, they can't be migrated to the newly created CPU controller's root in cgroup_update_dfl_csses()).

Existing code comes with a comment saying the "we don't support RT-tasks being in separate groups". Such comment is however stale and belongs to pre-RT_GROUP_SCHED times. Also, it doesn't make much sense for !RT_GROUP_ SCHED configurations, since checks related to RT bandwidth are not performed at all in these cases.

Make moving RT tasks between CPU controller groups viable by removing special case check for RT (and DEADLINE) tasks.

---
 kernel/sched/core.c | 4 ----
 1 file changed, 4 deletions(-)
kernel/sched/core.c +0 -4
index 3861dd6da91e7..63be0bcfa286d 100644
@@ -8474,10 +8474,6 @@ static int cpu_cgroup_can_attach(struct cgroup_taskset *tset)
 #ifdef CONFIG_RT_GROUP_SCHED
 		if (!sched_rt_can_attach(css_tg(css), task))
 			return -EINVAL;
-#else
-		/* We don't support RT-tasks being in separate groups */
-		if (task->sched_class != &fair_sched_class)
-			return -EINVAL;
 #endif
 		/*
 		 * Serialize against wake_up_new_task() such that if its
Signature · 1 line
2.20.1
author maintainer
#49 lore raw

PATCH 49/129 x86/reboot: Always use NMI fallback when shutdown via reboot vector IPI fails

In reply to Greg Kroah-Hartman

From: Grzegorz Halat <[email protected]>

[ Upstream commit 747d5a1bf293dcb33af755a6d285d41b8c1ea010 ]

A reboot request sends an IPI via the reboot vector and waits for all other CPUs to stop. If one or more CPUs are in critical regions with interrupts disabled then the IPI is not handled on those CPUs and the shutdown hangs if native_stop_other_cpus() is called with the wait argument set.

Such a situation can happen when one CPU was stopped within a lock held section and another CPU is trying to acquire that lock with interrupts disabled. There are other scenarios which can cause such a lockup as well.

In theory the shutdown should be attempted by an NMI IPI after the timeout period elapsed. Though the wait loop after sending the reboot vector IPI prevents this. It checks the wait request argument and the timeout. If wait is set, which is true for sys_reboot() then it won't fall through to the NMI shutdown method after the timeout period has finished.

This was an oversight when the NMI shutdown mechanism was added to handle the 'reboot IPI is not working' situation. The mechanism was added to deal with stuck panic shutdowns, which do not have the wait request set, so the 'wait request' case was probably not considered.

Remove the wait check from the post reboot vector IPI wait loop and enforce that the wait loop in the NMI fallback path is invoked even if NMI IPIs are disabled or the registration of the NMI handler fails. That second wait loop will then hang if not all CPUs shutdown and the wait argument is set.

[ tglx: Avoid the hard to parse line break in the NMI fallback path,
add comments and massage the changelog ]

Fixes 7d007d21e539 ("x86/reboot: Use NMI to assist in shutting down if IRQ fails")
Cc Don Zickus <[email protected]>
---
 arch/x86/kernel/smp.c | 46 +++++++++++++++++++++++++------------------
 1 file changed, 27 insertions(+), 19 deletions(-)
arch/x86/kernel/smp.c +27 -19
index 2863ad3066921..33ba47c44816b 100644
@@ -181,6 +181,12 @@ asmlinkage __visible void smp_reboot_interrupt(void)
 	irq_exit();
 }
 
+static int register_stop_handler(void)
+{
+	return register_nmi_handler(NMI_LOCAL, smp_stop_nmi_callback,
+				    NMI_FLAG_FIRST, "smp_stop");
+}
+
 static void native_stop_other_cpus(int wait)
 {
 	unsigned long flags;
@@ -214,39 +220,41 @@ static void native_stop_other_cpus(int wait)
 		apic->send_IPI_allbutself(REBOOT_VECTOR);
 
 		/*
-		 * Don't wait longer than a second if the caller
-		 * didn't ask us to wait.
+		 * Don't wait longer than a second for IPI completion. The
+		 * wait request is not checked here because that would
+		 * prevent an NMI shutdown attempt in case that not all
+		 * CPUs reach shutdown state.
 		 */
 		timeout = USEC_PER_SEC;
-		while (num_online_cpus() > 1 && (wait || timeout--))
+		while (num_online_cpus() > 1 && timeout--)
 			udelay(1);
 	}
-	
-	/* if the REBOOT_VECTOR didn't work, try with the NMI */
-	if ((num_online_cpus() > 1) && (!smp_no_nmi_ipi))  {
-		if (register_nmi_handler(NMI_LOCAL, smp_stop_nmi_callback,
-					 NMI_FLAG_FIRST, "smp_stop"))
-			/* Note: we ignore failures here */
-			/* Hope the REBOOT_IRQ is good enough */
-			goto finish;
-
-		/* sync above data before sending IRQ */
-		wmb();
 
-		pr_emerg("Shutting down cpus with NMI\n");
+	/* if the REBOOT_VECTOR didn't work, try with the NMI */
+	if (num_online_cpus() > 1) {
+		/*
+		 * If NMI IPI is enabled, try to register the stop handler
+		 * and send the IPI. In any case try to wait for the other
+		 * CPUs to stop.
+		 */
+		if (!smp_no_nmi_ipi && !register_stop_handler()) {
+			/* Sync above data before sending IRQ */
+			wmb();
 
-		apic->send_IPI_allbutself(NMI_VECTOR);
+			pr_emerg("Shutting down cpus with NMI\n");
 
+			apic->send_IPI_allbutself(NMI_VECTOR);
+		}
 		/*
-		 * Don't wait longer than a 10 ms if the caller
-		 * didn't ask us to wait.
+		 * Don't wait longer than 10 ms if the caller didn't
+		 * reqeust it. If wait is true, the machine hangs here if
+		 * one or more CPUs do not reach shutdown state.
 		 */
 		timeout = USEC_PER_MSEC * 10;
 		while (num_online_cpus() > 1 && (wait || timeout--))
 			udelay(1);
 	}
 
-finish:
 	local_irq_save(flags);
 	disable_local_APIC();
 	mcheck_cpu_clear(this_cpu_ptr(&cpu_info));
Signature · 1 line
2.20.1
author maintainer
#50 lore raw

PATCH 50/129 x86/apic: Soft disable APIC before initializing it

In reply to Greg Kroah-Hartman

From: Thomas Gleixner <[email protected]>

[ Upstream commit 2640da4cccf5cc613bf26f0998b9e340f4b5f69c ]

If the APIC was already enabled on entry of setup_local_APIC() then disabling it soft via the SPIV register makes a lot of sense.

That masks all LVT entries and brings it into a well defined state.

Otherwise previously enabled LVTs which are not touched in the setup function stay unmasked and might surprise the just booting kernel.

---
 arch/x86/kernel/apic/apic.c | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/x86/kernel/apic/apic.c +8 -0
index 928ffdc21873c..232350519062b 100644
@@ -1303,6 +1303,14 @@ void setup_local_APIC(void)
 		return;
 	}
 
+	/*
+	 * If this comes from kexec/kcrash the APIC might be enabled in
+	 * SPIV. Soft disable it before doing further initialization.
+	 */
+	value = apic_read(APIC_SPIV);
+	value &= ~APIC_SPIV_APIC_ENABLED;
+	apic_write(APIC_SPIV, value);
+
 #ifdef CONFIG_X86_32
 	/* Pound the ESR really hard over the head with a big hammer - mbligh */
 	if (lapic_is_integrated() && apic->disable_esr) {
Signature · 1 line
2.20.1
author maintainer
#51 lore raw

PATCH 51/129 ALSA: hda - Show the fatal CORB/RIRB error more clearly

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

[ Upstream commit dd65f7e19c6961ba6a69f7c925021b7a270cb950 ]

The last fallback of CORB/RIRB communication error recovery is to turn on the single command mode, and this last resort usually means that something is really screwed up. Instead of a normal dev_err(), show the error more clearly with dev_WARN() with the caller stack trace.

Also, show the bus-reset fallback also as an error, too.

---
 sound/pci/hda/hda_controller.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
sound/pci/hda/hda_controller.c +4 -1
index 85dbe2420248d..c5e82329348b3 100644
@@ -866,10 +866,13 @@ static int azx_rirb_get_response(struct hdac_bus *bus, unsigned int addr,
 	 */
 	if (hbus->allow_bus_reset && !hbus->response_reset && !hbus->in_reset) {
 		hbus->response_reset = 1;
+		dev_err(chip->card->dev,
+			"No response from codec, resetting bus: last cmd=0x%08x\n",
+			bus->last_cmd[addr]);
 		return -EAGAIN; /* give a chance to retry */
 	}
 
-	dev_err(chip->card->dev,
+	dev_WARN(chip->card->dev,
 		"azx_get_response timeout, switching to single_cmd mode: last cmd=0x%08x\n",
 		bus->last_cmd[addr]);
 	chip->single_cmd = 1;
Signature · 1 line
2.20.1
author maintainer
#52 lore raw

PATCH 52/129 ALSA: i2c: ak4xxx-adda: Fix a possible null pointer dereference in build_adc_controls()

In reply to Greg Kroah-Hartman

From: Jia-Ju Bai <[email protected]>

[ Upstream commit 2127c01b7f63b06a21559f56a8c81a3c6535bd1a ]

In build_adc_controls(), there is an if statement on line 773 to check whether ak->adc_info is NULL:

    if (! ak->adc_info ||
        ! ak->adc_info[mixer_ch].switch_name)

When ak->adc_info is NULL, it is used on line 792:

    knew.name = ak->adc_info[mixer_ch].selector_name;

Thus, a possible null-pointer dereference may occur.

To fix this bug, referring to lines 773 and 774, ak->adc_info and ak->adc_info[mixer_ch].selector_name are checked before being used.

This bug is found by a static analysis tool STCheck written by us.

---
 sound/i2c/other/ak4xxx-adda.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
sound/i2c/other/ak4xxx-adda.c +4 -3
index bf377dc192aa7..d33e02c317129 100644
@@ -789,11 +789,12 @@ static int build_adc_controls(struct snd_akm4xxx *ak)
 				return err;
 
 			memset(&knew, 0, sizeof(knew));
-			knew.name = ak->adc_info[mixer_ch].selector_name;
-			if (!knew.name) {
+			if (!ak->adc_info ||
+				!ak->adc_info[mixer_ch].selector_name) {
 				knew.name = "Capture Channel";
 				knew.index = mixer_ch + ak->idx_offset * 2;
-			}
+			} else
+				knew.name = ak->adc_info[mixer_ch].selector_name;
 
 			knew.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
 			knew.info = ak4xxx_capture_source_info;
Signature · 1 line
2.20.1
author maintainer
#53 lore raw

PATCH 53/129 media: iguanair: add sanity checks

In reply to Greg Kroah-Hartman

From: Oliver Neukum <[email protected]>

[ Upstream commit ab1cbdf159beba7395a13ab70bc71180929ca064 ]

The driver needs to check the endpoint types, too, as opposed to the number of endpoints. This also requires moving the check earlier.

---
 drivers/media/rc/iguanair.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)
drivers/media/rc/iguanair.c +7 -8
index 5f634545ddd81..25470395c43f1 100644
@@ -430,6 +430,10 @@ static int iguanair_probe(struct usb_interface *intf,
 	int ret, pipein, pipeout;
 	struct usb_host_interface *idesc;
 
+	idesc = intf->altsetting;
+	if (idesc->desc.bNumEndpoints < 2)
+		return -ENODEV;
+
 	ir = kzalloc(sizeof(*ir), GFP_KERNEL);
 	rc = rc_allocate_device();
 	if (!ir || !rc) {
@@ -444,18 +448,13 @@ static int iguanair_probe(struct usb_interface *intf,
 	ir->urb_in = usb_alloc_urb(0, GFP_KERNEL);
 	ir->urb_out = usb_alloc_urb(0, GFP_KERNEL);
 
-	if (!ir->buf_in || !ir->packet || !ir->urb_in || !ir->urb_out) {
+	if (!ir->buf_in || !ir->packet || !ir->urb_in || !ir->urb_out ||
+	    !usb_endpoint_is_int_in(&idesc->endpoint[0].desc) ||
+	    !usb_endpoint_is_int_out(&idesc->endpoint[1].desc)) {
 		ret = -ENOMEM;
 		goto out;
 	}
 
-	idesc = intf->altsetting;
-
-	if (idesc->desc.bNumEndpoints < 2) {
-		ret = -ENODEV;
-		goto out;
-	}
-
 	ir->rc = rc;
 	ir->dev = &intf->dev;
 	ir->udev = udev;
Signature · 1 line
2.20.1
author maintainer
#54 lore raw

PATCH 54/129 base: soc: Export soc_device_register/unregister APIs

In reply to Greg Kroah-Hartman

From: Vinod Koul <[email protected]>

[ Upstream commit f7ccc7a397cf2ef64aebb2f726970b93203858d2 ]

Qcom Socinfo driver can be built as a module, so
export these two APIs.

---
 drivers/base/soc.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/base/soc.c +2 -0
index b63f23e6ad61b..ddb32c890fa6a 100644
@@ -145,6 +145,7 @@ struct soc_device *soc_device_register(struct soc_device_attribute *soc_dev_attr
 out1:
 	return ERR_PTR(ret);
 }
+EXPORT_SYMBOL_GPL(soc_device_register);
 
 /* Ensure soc_dev->attr is freed prior to calling soc_device_unregister. */
 void soc_device_unregister(struct soc_device *soc_dev)
@@ -153,6 +154,7 @@ void soc_device_unregister(struct soc_device *soc_dev)
 
 	device_unregister(&soc_dev->dev);
 }
+EXPORT_SYMBOL_GPL(soc_device_unregister);
 
 static int __init soc_bus_register(void)
 {
Signature · 1 line
2.20.1
author maintainer
#55 lore raw

PATCH 55/129 ALSA: usb-audio: Skip bSynchAddress endpoint check if it is invalid

In reply to Greg Kroah-Hartman

From: Ard van Breemen <[email protected]>

[ Upstream commit 1b34121d9f26d272b0b2334209af6b6fc82d4bf1 ]

The Linux kernel assumes that get_endpoint(alts,0) and get_endpoint(alts,1) are eachothers feedback endpoints.
To reassure that validity it will test bsynchaddress to comply with that assumption. But if the bsyncaddress is 0 (invalid), it will flag that as a wrong assumption and return an error.
Fix: Skip the test if bSynchAddress is 0.
Note: those with a valid bSynchAddress should have a code quirck added.

---
 sound/usb/pcm.c | 1 +
 1 file changed, 1 insertion(+)
sound/usb/pcm.c +1 -0
index 497bad9f27898..9bc995f9b4e17 100644
@@ -470,6 +470,7 @@ static int set_sync_endpoint(struct snd_usb_substream *subs,
 	}
 	ep = get_endpoint(alts, 1)->bEndpointAddress;
 	if (get_endpoint(alts, 0)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
+	    get_endpoint(alts, 0)->bSynchAddress != 0 &&
 	    ((is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress | USB_DIR_IN)) ||
 	     (!is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress & ~USB_DIR_IN)))) {
 		dev_err(&dev->dev,
Signature · 1 line
2.20.1
author maintainer
#56 lore raw

PATCH 56/129 ia64:unwind: fix double free for mod->arch.init_unw_table

In reply to Greg Kroah-Hartman

From: chenzefeng <[email protected]>

[ Upstream commit c5e5c48c16422521d363c33cfb0dcf58f88c119b ]

The function free_module in file kernel/module.c as follow:

void free_module(struct module *mod) {
	......
	module_arch_cleanup(mod);
	......
	module_arch_freeing_init(mod);
	......
}

Both module_arch_cleanup and module_arch_freeing_init function would free the mod->arch.init_unw_table, which cause double free.

Here, set mod->arch.init_unw_table = NULL after remove the unwind table to avoid double free.

---
 arch/ia64/kernel/module.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
arch/ia64/kernel/module.c +6 -2
index d1d945c6bd05f..9fe114620b9d6 100644
@@ -912,8 +912,12 @@ module_finalize (const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *mo
 void
 module_arch_cleanup (struct module *mod)
 {
-	if (mod->arch.init_unw_table)
+	if (mod->arch.init_unw_table) {
 		unw_remove_unwind_table(mod->arch.init_unw_table);
-	if (mod->arch.core_unw_table)
+		mod->arch.init_unw_table = NULL;
+	}
+	if (mod->arch.core_unw_table) {
 		unw_remove_unwind_table(mod->arch.core_unw_table);
+		mod->arch.core_unw_table = NULL;
+	}
 }
Signature · 1 line
2.20.1
author maintainer
#57 lore raw

PATCH 57/129 EDAC/altera: Use the proper type for the IRQ status bits

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 8faa1cf6ed82f33009f63986c3776cc48af1b7b2 ]

Smatch complains about the cast of a u32 pointer to unsigned long:

drivers/edac/altera_edac.c:1878 altr_edac_a10_irq_handler()
warn: passing casted pointer '&irq_status' to 'find_first_bit()'

This code wouldn't work on a 64 bit big endian system because it would read past the end of &irq_status.

[ bp: massage. ]

Fixes 13ab8448d2c9 ("EDAC, altera: Add ECC Manager IRQ controller support")
Cc James Morse <[email protected]>
Cc linux-edac <[email protected]>
Cc Mauro Carvalho Chehab <[email protected]>
Cc Tony Luck <[email protected]>
---
 drivers/edac/altera_edac.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/edac/altera_edac.c +3 -1
index b0bd0f64d8f21..6037efa94c9ba 100644
@@ -1651,6 +1651,7 @@ static void altr_edac_a10_irq_handler(struct irq_desc *desc)
 	struct altr_arria10_edac *edac = irq_desc_get_handler_data(desc);
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 	int irq = irq_desc_get_irq(desc);
+	unsigned long bits;
 
 	dberr = (irq = edac->db_irq) ? 1 : 0;
 	sm_offset = dberr ? A10_SYSMGR_ECC_INTSTAT_DERR_OFST :
@@ -1660,7 +1661,8 @@ static void altr_edac_a10_irq_handler(struct irq_desc *desc)
 
 	regmap_read(edac->ecc_mgr_map, sm_offset, &irq_status);
 
-	for_each_set_bit(bit, (unsigned long *)&irq_status, 32) {
+	bits = irq_status;
+	for_each_set_bit(bit, &bits, 32) {
 		irq = irq_linear_revmap(edac->domain, dberr * 32 + bit);
 		if (irq)
 			generic_handle_irq(irq);
Signature · 1 line
2.20.1
author maintainer
#58 lore raw

PATCH 58/129 md: dont call spare_active in md_reap_sync_thread if all member devices cant work

In reply to Greg Kroah-Hartman

From: Guoqing Jiang <[email protected]>

[ Upstream commit 0d8ed0e9bf9643f27f4816dca61081784dedb38d ]

When add one disk to array, the md_reap_sync_thread is responsible to activate the spare and set In_sync flag for the new member in spare_active().

But if raid1 has one member disk A, and disk B is added to the array. Then we offline A before all the datas are synchronized from A to B, obviously B doesn't have the latest data as A, but B is still marked with In_sync flag.

So let's not call spare_active under the condition, otherwise B is still showed with 'U' state which is not correct.

---
 drivers/md/md.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/md/md.c +2 -1
index 765a16dab2e5f..c1c514792457a 100644
@@ -8573,7 +8573,8 @@ void md_reap_sync_thread(struct mddev *mddev)
 	/* resync has finished, collect result */
 	md_unregister_thread(&mddev->sync_thread);
 	if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery) &&
-	    !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
+	    !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery) &&
+	    mddev->degraded != mddev->raid_disks) {
 		/* success...*/
 		/* activate any spares */
 		if (mddev->pers->spare_active(mddev)) {
Signature · 1 line
2.20.1
author maintainer
#59 lore raw

PATCH 59/129 md: dont set In_sync if array is frozen

In reply to Greg Kroah-Hartman

From: Guoqing Jiang <[email protected]>

[ Upstream commit 062f5b2ae12a153644c765e7ba3b0f825427be1d ]

When a disk is added to array, the following path is called in mdadm.

Manage_subdevs -> sysfs_freeze_array

               -> Manage_add
               -> sysfs_set_str(&info, NULL, "sync_action","idle")

Then from kernel side, Manage_add invokes the path (add_new_disk -> validate_super = super_1_validate) to set In_sync flag.

Since In_sync means "device is in_sync with rest of array", and the new added disk need to resync thread to help the synchronization of data. And md_reap_sync_thread would call spare_active to set In_sync for the new added disk finally. So don't set In_sync if array is in frozen.

---
 drivers/md/md.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
drivers/md/md.c +9 -2
index c1c514792457a..da8708b65356e 100644
@@ -1662,8 +1662,15 @@ static int super_1_validate(struct mddev *mddev, struct md_rdev *rdev)
 				if (!(le32_to_cpu(sb->feature_map) &
 				      MD_FEATURE_RECOVERY_BITMAP))
 					rdev->saved_raid_disk = -1;
-			} else
-				set_bit(In_sync, &rdev->flags);
+			} else {
+				/*
+				 * If the array is FROZEN, then the device can't
+				 * be in_sync with rest of array.
+				 */
+				if (!test_bit(MD_RECOVERY_FROZEN,
+					      &mddev->recovery))
+					set_bit(In_sync, &rdev->flags);
+			}
 			rdev->raid_disk = role;
 			break;
 		}
Signature · 1 line
2.20.1
author maintainer
#60 lore raw

PATCH 60/129 efi: cper: print AER info of PCIe fatal error

In reply to Greg Kroah-Hartman

From: Xiaofei Tan <[email protected]>

[ Upstream commit b194a77fcc4001dc40aecdd15d249648e8a436d1 ]

AER info of PCIe fatal error is not printed in the current driver. Because APEI driver will panic directly for fatal error, and can't run to the place of printing AER info.

An example log is as following:
{763}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 11 {763}[Hardware Error]: event severity: fatal
{763}[Hardware Error]: Error 0, type: fatal

{763}[Hardware Error]:   section_type: PCIe error
{763}[Hardware Error]:   port_type: 0, PCIe end point
{763}[Hardware Error]:   version: 4.0
{763}[Hardware Error]:   command: 0x0000, status: 0x0010
{763}[Hardware Error]:   device_id: 0000:82:00.0
{763}[Hardware Error]:   slot: 0
{763}[Hardware Error]:   secondary_bus: 0x00
{763}[Hardware Error]:   vendor_id: 0x8086, device_id: 0x10fb
{763}[Hardware Error]:   class_code: 000002
Kernel panic - not syncing: Fatal hardware error!

This issue was imported by the patch, '37448adfc7ce ("aerdrv: Move cper_print_aer() call out of interrupt context")'. To fix this issue, this patch adds print of AER info in cper_print_pcie() for fatal error.

Here is the example log after this patch applied:
{24}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 10 {24}[Hardware Error]: event severity: fatal
{24}[Hardware Error]: Error 0, type: fatal

{24}[Hardware Error]:   section_type: PCIe error
{24}[Hardware Error]:   port_type: 0, PCIe end point
{24}[Hardware Error]:   version: 4.0
{24}[Hardware Error]:   command: 0x0546, status: 0x4010
{24}[Hardware Error]:   device_id: 0000:01:00.0
{24}[Hardware Error]:   slot: 0
{24}[Hardware Error]:   secondary_bus: 0x00
{24}[Hardware Error]:   vendor_id: 0x15b3, device_id: 0x1019
{24}[Hardware Error]:   class_code: 000002
{24}[Hardware Error]:   aer_uncor_status: 0x00040000, aer_uncor_mask: 0x00000000
{24}[Hardware Error]:   aer_uncor_severity: 0x00062010
{24}[Hardware Error]:   TLP Header: 000000c0 01010000 00000001 00000000
Kernel panic - not syncing: Fatal hardware error!
Fixes 37448adfc7ce ("aerdrv: Move cper_print_aer() call out of interrupt context")
[ardb: put parens around terms of && operator]
---
 drivers/firmware/efi/cper.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
drivers/firmware/efi/cper.c +15 -0
index d425374254384..f40f7df4b7344 100644
@@ -384,6 +384,21 @@ static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie,
 		printk(
 	"%s""bridge: secondary_status: 0x%04x, control: 0x%04x\n",
 	pfx, pcie->bridge.secondary_status, pcie->bridge.control);
+
+	/* Fatal errors call __ghes_panic() before AER handler prints this */
+	if ((pcie->validation_bits & CPER_PCIE_VALID_AER_INFO) &&
+	    (gdata->error_severity & CPER_SEV_FATAL)) {
+		struct aer_capability_regs *aer;
+
+		aer = (struct aer_capability_regs *)pcie->aer_info;
+		printk("%saer_uncor_status: 0x%08x, aer_uncor_mask: 0x%08x\n",
+		       pfx, aer->uncor_status, aer->uncor_mask);
+		printk("%saer_uncor_severity: 0x%08x\n",
+		       pfx, aer->uncor_severity);
+		printk("%sTLP Header: %08x %08x %08x %08x\n", pfx,
+		       aer->header_log.dw0, aer->header_log.dw1,
+		       aer->header_log.dw2, aer->header_log.dw3);
+	}
 }
 
 static void cper_estatus_print_section(
Signature · 1 line
2.20.1
author maintainer
#61 lore raw

PATCH 61/129 media: gspca: zero usb_buf on error

In reply to Greg Kroah-Hartman

From: Hans Verkuil <[email protected]>

[ Upstream commit 4843a543fad3bf8221cf14e5d5f32d15cee89e84 ]

If reg_r() fails, then gspca_dev->usb_buf was left uninitialized, and some drivers used the contents of that buffer in logic.

This caused several syzbot errors:

https://syzkaller.appspot.com/bug?extid=397fd082ce5143e2f67d
https://syzkaller.appspot.com/bug?extid=1a35278dd0ebfb3a038a
https://syzkaller.appspot.com/bug?extid=06ddf1788cfd048c5e82

I analyzed the gspca drivers and zeroed the buffer where needed.

Reported-and-tested-by [email protected]
Reported-and-tested-by [email protected]
Reported-and-tested-by [email protected]
---
 drivers/media/usb/gspca/konica.c   |  5 +++++
 drivers/media/usb/gspca/nw80x.c    |  5 +++++
 drivers/media/usb/gspca/ov519.c    | 10 ++++++++++
 drivers/media/usb/gspca/ov534.c    |  5 +++++
 drivers/media/usb/gspca/ov534_9.c  |  1 +
 drivers/media/usb/gspca/se401.c    |  5 +++++
 drivers/media/usb/gspca/sn9c20x.c  |  5 +++++
 drivers/media/usb/gspca/sonixb.c   |  5 +++++
 drivers/media/usb/gspca/sonixj.c   |  5 +++++
 drivers/media/usb/gspca/spca1528.c |  5 +++++
 drivers/media/usb/gspca/sq930x.c   |  5 +++++
 drivers/media/usb/gspca/sunplus.c  |  5 +++++
 drivers/media/usb/gspca/vc032x.c   |  5 +++++
 drivers/media/usb/gspca/w996Xcf.c  |  5 +++++
 14 files changed, 71 insertions(+)
drivers/media/usb/gspca/konica.c +5 -0
index 78542fff403fc..5a37d32e8fd09 100644
@@ -127,6 +127,11 @@ static void reg_r(struct gspca_dev *gspca_dev, u16 value, u16 index)
 	if (ret < 0) {
 		pr_err("reg_r err %d\n", ret);
 		gspca_dev->usb_err = ret;
+		/*
+		 * Make sure the buffer is zeroed to avoid uninitialized
+		 * values.
+		 */
+		memset(gspca_dev->usb_buf, 0, 2);
 	}
 }
 
drivers/media/usb/gspca/nw80x.c +5 -0
index 599f755e75b86..7ebeee98dc1bb 100644
@@ -1584,6 +1584,11 @@ static void reg_r(struct gspca_dev *gspca_dev,
 	if (ret < 0) {
 		pr_err("reg_r err %d\n", ret);
 		gspca_dev->usb_err = ret;
+		/*
+		 * Make sure the buffer is zeroed to avoid uninitialized
+		 * values.
+		 */
+		memset(gspca_dev->usb_buf, 0, USB_BUF_SZ);
 		return;
 	}
 	if (len == 1)
drivers/media/usb/gspca/ov519.c +10 -0
index 965372a5ff2f3..7ac38905080ad 100644
@@ -2087,6 +2087,11 @@ static int reg_r(struct sd *sd, u16 index)
 	} else {
 		PERR("reg_r %02x failed %d\n", index, ret);
 		sd->gspca_dev.usb_err = ret;
+		/*
+		 * Make sure the result is zeroed to avoid uninitialized
+		 * values.
+		 */
+		gspca_dev->usb_buf[0] = 0;
 	}
 
 	return ret;
@@ -2115,6 +2120,11 @@ static int reg_r8(struct sd *sd,
 	} else {
 		PERR("reg_r8 %02x failed %d\n", index, ret);
 		sd->gspca_dev.usb_err = ret;
+		/*
+		 * Make sure the buffer is zeroed to avoid uninitialized
+		 * values.
+		 */
+		memset(gspca_dev->usb_buf, 0, 8);
 	}
 
 	return ret;
drivers/media/usb/gspca/ov534.c +5 -0
index 9266a5c9abc5d..ba289b4530772 100644
@@ -645,6 +645,11 @@ static u8 ov534_reg_read(struct gspca_dev *gspca_dev, u16 reg)
 	if (ret < 0) {
 		pr_err("read failed %d\n", ret);
 		gspca_dev->usb_err = ret;
+		/*
+		 * Make sure the result is zeroed to avoid uninitialized
+		 * values.
+		 */
+		gspca_dev->usb_buf[0] = 0;
 	}
 	return gspca_dev->usb_buf[0];
 }
drivers/media/usb/gspca/ov534_9.c +1 -0
index 47085cf2d7236..f2dca06069355 100644
@@ -1157,6 +1157,7 @@ static u8 reg_r(struct gspca_dev *gspca_dev, u16 reg)
 	if (ret < 0) {
 		pr_err("reg_r err %d\n", ret);
 		gspca_dev->usb_err = ret;
+		return 0;
 	}
 	return gspca_dev->usb_buf[0];
 }
drivers/media/usb/gspca/se401.c +5 -0
index 5102cea504710..6adbb0eca71fe 100644
@@ -115,6 +115,11 @@ static void se401_read_req(struct gspca_dev *gspca_dev, u16 req, int silent)
 			pr_err("read req failed req %#04x error %d\n",
 			       req, err);
 		gspca_dev->usb_err = err;
+		/*
+		 * Make sure the buffer is zeroed to avoid uninitialized
+		 * values.
+		 */
+		memset(gspca_dev->usb_buf, 0, READ_REQ_SIZE);
 	}
 }
 
drivers/media/usb/gspca/sn9c20x.c +5 -0
index 10269dad9d201..1a08a7a20114c 100644
@@ -923,6 +923,11 @@ static void reg_r(struct gspca_dev *gspca_dev, u16 reg, u16 length)
 	if (unlikely(result < 0 || result != length)) {
 		pr_err("Read register %02x failed %d\n", reg, result);
 		gspca_dev->usb_err = result;
+		/*
+		 * Make sure the buffer is zeroed to avoid uninitialized
+		 * values.
+		 */
+		memset(gspca_dev->usb_buf, 0, USB_BUF_SZ);
 	}
 }
 
drivers/media/usb/gspca/sonixb.c +5 -0
index 6696b2ec34e96..83e98b85ab6a1 100644
@@ -466,6 +466,11 @@ static void reg_r(struct gspca_dev *gspca_dev,
 		dev_err(gspca_dev->v4l2_dev.dev,
 			"Error reading register %02x: %d\n", value, res);
 		gspca_dev->usb_err = res;
+		/*
+		 * Make sure the result is zeroed to avoid uninitialized
+		 * values.
+		 */
+		gspca_dev->usb_buf[0] = 0;
 	}
 }
 
drivers/media/usb/gspca/sonixj.c +5 -0
index d49d76ec14212..9ec63f75b8ea4 100644
@@ -1174,6 +1174,11 @@ static void reg_r(struct gspca_dev *gspca_dev,
 	if (ret < 0) {
 		pr_err("reg_r err %d\n", ret);
 		gspca_dev->usb_err = ret;
+		/*
+		 * Make sure the buffer is zeroed to avoid uninitialized
+		 * values.
+		 */
+		memset(gspca_dev->usb_buf, 0, USB_BUF_SZ);
 	}
 }
 
drivers/media/usb/gspca/spca1528.c +5 -0
index f38fd8949609f..ee93bd443df5d 100644
@@ -84,6 +84,11 @@ static void reg_r(struct gspca_dev *gspca_dev,
 	if (ret < 0) {
 		pr_err("reg_r err %d\n", ret);
 		gspca_dev->usb_err = ret;
+		/*
+		 * Make sure the buffer is zeroed to avoid uninitialized
+		 * values.
+		 */
+		memset(gspca_dev->usb_buf, 0, USB_BUF_SZ);
 	}
 }
 
drivers/media/usb/gspca/sq930x.c +5 -0
index e274cf19a3ea2..b236e9dcd4685 100644
@@ -438,6 +438,11 @@ static void reg_r(struct gspca_dev *gspca_dev,
 	if (ret < 0) {
 		pr_err("reg_r %04x failed %d\n", value, ret);
 		gspca_dev->usb_err = ret;
+		/*
+		 * Make sure the buffer is zeroed to avoid uninitialized
+		 * values.
+		 */
+		memset(gspca_dev->usb_buf, 0, USB_BUF_SZ);
 	}
 }
 
drivers/media/usb/gspca/sunplus.c +5 -0
index 46c9f2229a186..cc3e1478c5a09 100644
@@ -268,6 +268,11 @@ static void reg_r(struct gspca_dev *gspca_dev,
 	if (ret < 0) {
 		pr_err("reg_r err %d\n", ret);
 		gspca_dev->usb_err = ret;
+		/*
+		 * Make sure the buffer is zeroed to avoid uninitialized
+		 * values.
+		 */
+		memset(gspca_dev->usb_buf, 0, USB_BUF_SZ);
 	}
 }
 
drivers/media/usb/gspca/vc032x.c +5 -0
index b4efb2fb36fa3..5032b9d7d9bb2 100644
@@ -2919,6 +2919,11 @@ static void reg_r_i(struct gspca_dev *gspca_dev,
 	if (ret < 0) {
 		pr_err("reg_r err %d\n", ret);
 		gspca_dev->usb_err = ret;
+		/*
+		 * Make sure the buffer is zeroed to avoid uninitialized
+		 * values.
+		 */
+		memset(gspca_dev->usb_buf, 0, USB_BUF_SZ);
 	}
 }
 static void reg_r(struct gspca_dev *gspca_dev,
drivers/media/usb/gspca/w996Xcf.c +5 -0
index 896f1b2b91793..948aaae4d47eb 100644
@@ -147,6 +147,11 @@ static int w9968cf_read_sb(struct sd *sd)
 	} else {
 		pr_err("Read SB reg [01] failed\n");
 		sd->gspca_dev.usb_err = ret;
+		/*
+		 * Make sure the buffer is zeroed to avoid uninitialized
+		 * values.
+		 */
+		memset(sd->gspca_dev.usb_buf, 0, 2);
 	}
 
 	udelay(W9968CF_I2C_BUS_DELAY);
Signature · 1 line
2.20.1
author maintainer
#62 lore raw

PATCH 62/129 dmaengine: iop-adma: use correct printk format strings

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

[ Upstream commit 00c9755524fbaa28117be774d7c92fddb5ca02f3 ]

When compile-testing on other architectures, we get lots of warnings about incorrect format strings, like:

drivers/dma/iop-adma.c: In function 'iop_adma_alloc_slots':
drivers/dma/iop-adma.c:307:6: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=]

drivers/dma/iop-adma.c: In function 'iop_adma_prep_dma_memcpy':

Quoted 1 line
Quoted 1 line

drivers/dma/iop-adma.c:518:40: warning: format '%u' expects argument of type 'unsigned int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=]

Use %zu for printing size_t as required, and cast the dma_addr_t arguments to 'u64' for printing with %llx. Ideally this should use the %pad format string, but that requires an lvalue argument that doesn't work here.

---
 drivers/dma/iop-adma.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/dma/iop-adma.c +9 -9
index a410657f7bcd6..012584cf3c17b 100644
@@ -125,9 +125,9 @@ static void __iop_adma_slot_cleanup(struct iop_adma_chan *iop_chan)
 	list_for_each_entry_safe(iter, _iter, &iop_chan->chain,
 					chain_node) {
 		pr_debug("\tcookie: %d slot: %d busy: %d "
-			"this_desc: %#x next_desc: %#x ack: %d\n",
+			"this_desc: %#x next_desc: %#llx ack: %d\n",
 			iter->async_tx.cookie, iter->idx, busy,
-			iter->async_tx.phys, iop_desc_get_next_desc(iter),
+			iter->async_tx.phys, (u64)iop_desc_get_next_desc(iter),
 			async_tx_test_ack(&iter->async_tx));
 		prefetch(_iter);
 		prefetch(&_iter->async_tx);
@@ -315,9 +315,9 @@ iop_adma_alloc_slots(struct iop_adma_chan *iop_chan, int num_slots,
 				int i;
 				dev_dbg(iop_chan->device->common.dev,
 					"allocated slot: %d "
-					"(desc %p phys: %#x) slots_per_op %d\n",
+					"(desc %p phys: %#llx) slots_per_op %d\n",
 					iter->idx, iter->hw_desc,
-					iter->async_tx.phys, slots_per_op);
+					(u64)iter->async_tx.phys, slots_per_op);
 
 				/* pre-ack all but the last descriptor */
 				if (num_slots != slots_per_op)
@@ -525,7 +525,7 @@ iop_adma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dma_dest,
 		return NULL;
 	BUG_ON(len > IOP_ADMA_MAX_BYTE_COUNT);
 
-	dev_dbg(iop_chan->device->common.dev, "%s len: %u\n",
+	dev_dbg(iop_chan->device->common.dev, "%s len: %zu\n",
 		__func__, len);
 
 	spin_lock_bh(&iop_chan->lock);
@@ -558,7 +558,7 @@ iop_adma_prep_dma_xor(struct dma_chan *chan, dma_addr_t dma_dest,
 	BUG_ON(len > IOP_ADMA_XOR_MAX_BYTE_COUNT);
 
 	dev_dbg(iop_chan->device->common.dev,
-		"%s src_cnt: %d len: %u flags: %lx\n",
+		"%s src_cnt: %d len: %zu flags: %lx\n",
 		__func__, src_cnt, len, flags);
 
 	spin_lock_bh(&iop_chan->lock);
@@ -591,7 +591,7 @@ iop_adma_prep_dma_xor_val(struct dma_chan *chan, dma_addr_t *dma_src,
 	if (unlikely(!len))
 		return NULL;
 
-	dev_dbg(iop_chan->device->common.dev, "%s src_cnt: %d len: %u\n",
+	dev_dbg(iop_chan->device->common.dev, "%s src_cnt: %d len: %zu\n",
 		__func__, src_cnt, len);
 
 	spin_lock_bh(&iop_chan->lock);
@@ -629,7 +629,7 @@ iop_adma_prep_dma_pq(struct dma_chan *chan, dma_addr_t *dst, dma_addr_t *src,
 	BUG_ON(len > IOP_ADMA_XOR_MAX_BYTE_COUNT);
 
 	dev_dbg(iop_chan->device->common.dev,
-		"%s src_cnt: %d len: %u flags: %lx\n",
+		"%s src_cnt: %d len: %zu flags: %lx\n",
 		__func__, src_cnt, len, flags);
 
 	if (dmaf_p_disabled_continue(flags))
@@ -692,7 +692,7 @@ iop_adma_prep_dma_pq_val(struct dma_chan *chan, dma_addr_t *pq, dma_addr_t *src,
 		return NULL;
 	BUG_ON(len > IOP_ADMA_XOR_MAX_BYTE_COUNT);
 
-	dev_dbg(iop_chan->device->common.dev, "%s src_cnt: %d len: %u\n",
+	dev_dbg(iop_chan->device->common.dev, "%s src_cnt: %d len: %zu\n",
 		__func__, src_cnt, len);
 
 	spin_lock_bh(&iop_chan->lock);
Signature · 1 line
2.20.1
author maintainer
#63 lore raw

PATCH 63/129 media: omap3isp: Dont set streaming state on random subdevs

In reply to Greg Kroah-Hartman

From: Sakari Ailus <[email protected]>

[ Upstream commit 7ef57be07ac146e70535747797ef4aee0f06e9f9 ]

The streaming state should be set to the first upstream sub-device only, not everywhere, for a sub-device driver itself knows how to best control the streaming state of its own upstream sub-devices.

---
 drivers/media/platform/omap3isp/isp.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/media/platform/omap3isp/isp.c +8 -0
index a21b12c5c0853..ce651d3ca1b82 100644
@@ -726,6 +726,10 @@ static int isp_pipeline_enable(struct isp_pipeline *pipe,
 					s_stream, mode);
 			pipe->do_propagation = true;
 		}
+
+		/* Stop at the first external sub-device. */
+		if (subdev->dev != isp->dev)
+			break;
 	}
 
 	return 0;
@@ -840,6 +844,10 @@ static int isp_pipeline_disable(struct isp_pipeline *pipe)
 						      &subdev->entity);
 			failure = -ETIMEDOUT;
 		}
+
+		/* Stop at the first external sub-device. */
+		if (subdev->dev != isp->dev)
+			break;
 	}
 
 	return failure;
Signature · 1 line
2.20.1
author maintainer
#64 lore raw

PATCH 64/129 net: lpc-enet: fix printk format strings

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

[ Upstream commit de6f97b2bace0e2eb6c3a86e124d1e652a587b56 ]

compile-testing this driver on other architectures showed multiple warnings:

drivers/net/ethernet/nxp/lpc_eth.c: In function 'lpc_eth_drv_probe':
drivers/net/ethernet/nxp/lpc_eth.c:1337:19: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t {aka long long unsigned int}' [-Wformat=]

drivers/net/ethernet/nxp/lpc_eth.c:1342:19: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=]

Use format strings that work on all architectures.

---
 drivers/net/ethernet/nxp/lpc_eth.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/net/ethernet/nxp/lpc_eth.c +7 -6
index 8e13ec84c5381..9fcaf19106335 100644
@@ -1374,13 +1374,14 @@ static int lpc_eth_drv_probe(struct platform_device *pdev)
 	pldat->dma_buff_base_p = dma_handle;
 
 	netdev_dbg(ndev, "IO address space     :%pR\n", res);
-	netdev_dbg(ndev, "IO address size      :%d\n", resource_size(res));
+	netdev_dbg(ndev, "IO address size      :%zd\n",
+			(size_t)resource_size(res));
 	netdev_dbg(ndev, "IO address (mapped)  :0x%p\n",
 			pldat->net_base);
 	netdev_dbg(ndev, "IRQ number           :%d\n", ndev->irq);
-	netdev_dbg(ndev, "DMA buffer size      :%d\n", pldat->dma_buff_size);
-	netdev_dbg(ndev, "DMA buffer P address :0x%08x\n",
-			pldat->dma_buff_base_p);
+	netdev_dbg(ndev, "DMA buffer size      :%zd\n", pldat->dma_buff_size);
+	netdev_dbg(ndev, "DMA buffer P address :%pad\n",
+			&pldat->dma_buff_base_p);
 	netdev_dbg(ndev, "DMA buffer V address :0x%p\n",
 			pldat->dma_buff_base_v);
 
@@ -1427,8 +1428,8 @@ static int lpc_eth_drv_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_out_unregister_netdev;
 
-	netdev_info(ndev, "LPC mac at 0x%08x irq %d\n",
-	       res->start, ndev->irq);
+	netdev_info(ndev, "LPC mac at 0x%08lx irq %d\n",
+	       (unsigned long)res->start, ndev->irq);
 
 	phydev = ndev->phydev;
 
Signature · 1 line
2.20.1
author maintainer
#65 lore raw

PATCH 65/129 ARM: dts: imx7d: cl-som-imx7: make ethernet work again

In reply to Greg Kroah-Hartman

From: André Draszik <[email protected]>

[ Upstream commit 9846a4524ac90b63496580b7ad50674b40d92a8f ]

Recent changes to the atheros at803x driver caused ethernet to stop working on this board.
In particular commit 6d4cd041f0af
("net: phy: at803x: disable delay only for RGMII mode") and commit cd28d1d6e52e
("net: phy: at803x: Disable phy delay for RGMII mode") fix the AR8031 driver to configure the phy's (RX/TX) delays as per the 'phy-mode' in the device tree.

This now prevents ethernet from working on this board.

It used to work before those commits, because the AR8031 comes out of reset with RX delay enabled, and the at803x driver didn't touch the delay configuration at all when "rgmii" mode was selected, and because arch/arm/mach-imx/mach-imx7d.c:ar8031_phy_fixup() unconditionally enables TX delay.

Since above commits ar8031_phy_fixup() also has no effect anymore, and the end-result is that all delays are disabled in the phy, no ethernet.

Update the device tree to restore functionality.

CC Ilya Ledvich <[email protected]>
CC Igor Grinberg <[email protected]>
CC Rob Herring <[email protected]>
CC Mark Rutland <[email protected]>
CC Shawn Guo <[email protected]>
CC Sascha Hauer <[email protected]>
CC Pengutronix Kernel Team <[email protected]>
CC Fabio Estevam <[email protected]>
CC NXP Linux Team <[email protected]>
---
 arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/imx7d-cl-som-imx7.dts +2 -2
index 2051306008534..72d1b8209f5e6 100644
@@ -43,7 +43,7 @@
 			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
 	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
 	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 	fsl,magic-packet;
 	status = "okay";
@@ -69,7 +69,7 @@
 			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
 	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
 	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy1>;
 	fsl,magic-packet;
 	status = "okay";
Signature · 1 line
2.20.1
author maintainer
#66 lore raw

PATCH 66/129 media: radio/si470x: kill urb on error

In reply to Greg Kroah-Hartman

From: Hans Verkuil <[email protected]>

[ Upstream commit 0d616f2a3fdbf1304db44d451d9f07008556923b ]

In the probe() function radio->int_in_urb was not killed if an error occurred in the probe sequence. It was also missing in the disconnect.

This caused this syzbot issue:

https://syzkaller.appspot.com/bug?extid=2d4fc2a0c45ad8da7e99

Reported-and-tested-by [email protected]
---
 drivers/media/radio/si470x/radio-si470x-usb.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/media/radio/si470x/radio-si470x-usb.c +4 -1
index 4b132c29f2900..1d045a8c29e21 100644
@@ -742,7 +742,7 @@ static int si470x_usb_driver_probe(struct usb_interface *intf,
 	/* start radio */
 	retval = si470x_start_usb(radio);
 	if (retval < 0)
-		goto err_all;
+		goto err_buf;
 
 	/* set initial frequency */
 	si470x_set_freq(radio, 87.5 * FREQ_MUL); /* available in all regions */
@@ -757,6 +757,8 @@ static int si470x_usb_driver_probe(struct usb_interface *intf,
 
 	return 0;
 err_all:
+	usb_kill_urb(radio->int_in_urb);
+err_buf:
 	kfree(radio->buffer);
 err_ctrl:
 	v4l2_ctrl_handler_free(&radio->hdl);
@@ -830,6 +832,7 @@ static void si470x_usb_driver_disconnect(struct usb_interface *intf)
 	mutex_lock(&radio->lock);
 	v4l2_device_disconnect(&radio->v4l2_dev);
 	video_unregister_device(&radio->videodev);
+	usb_kill_urb(radio->int_in_urb);
 	usb_set_intfdata(intf, NULL);
 	mutex_unlock(&radio->lock);
 	v4l2_device_put(&radio->v4l2_dev);
Signature · 1 line
2.20.1
author maintainer
#67 lore raw

PATCH 67/129 media: hdpvr: add terminating 0 at end of string

In reply to Greg Kroah-Hartman

From: Hans Verkuil <[email protected]>

[ Upstream commit 8b8900b729e4f31f12ac1127bde137c775c327e6 ]

dev->usbc_buf was passed as argument for %s, but it was not safeguarded by a terminating 0.

This caused this syzbot issue:

https://syzkaller.appspot.com/bug?extid=79d18aac4bf1770dd050

Reported-and-tested-by [email protected]
---
 drivers/media/usb/hdpvr/hdpvr-core.c | 1 +
 1 file changed, 1 insertion(+)
drivers/media/usb/hdpvr/hdpvr-core.c +1 -0
index 7b34108f6587e..99171b912a2d8 100644
@@ -143,6 +143,7 @@ static int device_authorization(struct hdpvr_device *dev)
 
 	dev->fw_ver = dev->usbc_buf[1];
 
+	dev->usbc_buf[46] = '\0';
 	v4l2_info(&dev->v4l2_dev, "firmware version 0x%x dated %s\n",
 			  dev->fw_ver, &dev->usbc_buf[2]);
 
Signature · 1 line
2.20.1
author maintainer
#68 lore raw

PATCH 68/129 media: dvb-core: fix a memory leak bug

In reply to Greg Kroah-Hartman

From: Wenwen Wang <[email protected]>

[ Upstream commit fcd5ce4b3936242e6679875a4d3c3acfc8743e15 ]

In dvb_create_media_entity(), 'dvbdev->entity' is allocated through kzalloc(). Then, 'dvbdev->pads' is allocated through kcalloc(). However, if kcalloc() fails, the allocated 'dvbdev->entity' is not deallocated, leading to a memory leak bug. To fix this issue, free 'dvbdev->entity' before returning -ENOMEM.

---
 drivers/media/dvb-core/dvbdev.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/media/dvb-core/dvbdev.c +3 -1
index 75a3f4b57fd4f..a1cc1c1e53182 100644
@@ -314,8 +314,10 @@ static int dvb_create_media_entity(struct dvb_device *dvbdev,
 	if (npads) {
 		dvbdev->pads = kcalloc(npads, sizeof(*dvbdev->pads),
 				       GFP_KERNEL);
-		if (!dvbdev->pads)
+		if (!dvbdev->pads) {
+			kfree(dvbdev->entity);
 			return -ENOMEM;
+		}
 	}
 
 	switch (type) {
Signature · 1 line
2.20.1
author maintainer
#69 lore raw

PATCH 69/129 PM / devfreq: passive: Use non-devm notifiers

In reply to Greg Kroah-Hartman

From: Leonard Crestez <[email protected]>

[ Upstream commit 0ef7c7cce43f6ecc2b96d447e69b2900a9655f7c ]

The devfreq passive governor registers and unregisters devfreq transition notifiers on DEVFREQ_GOV_START/GOV_STOP using devm wrappers.

If devfreq itself is registered with devm then a warning is triggered on rmmod from devm_devfreq_unregister_notifier. Call stack looks like this:

	devm_devfreq_unregister_notifier+0x30/0x40
	devfreq_passive_event_handler+0x4c/0x88
	devfreq_remove_device.part.8+0x6c/0x9c
	devm_devfreq_dev_release+0x18/0x20
	release_nodes+0x1b0/0x220
	devres_release_all+0x78/0x84
	device_release_driver_internal+0x100/0x1c0
	driver_detach+0x4c/0x90
	bus_remove_driver+0x7c/0xd0
	driver_unregister+0x2c/0x58
	platform_driver_unregister+0x10/0x18
	imx_devfreq_platdrv_exit+0x14/0xd40 [imx_devfreq]

This happens because devres_release_all will first remove all the nodes into a separate todo list so the nested devres_release from devm_devfreq_unregister_notifier won't find anything.

Fix the warning by calling the non-devm APIS for frequency notification. Using devm wrappers is not actually useful for a governor anyway: it relies on the devfreq core to correctly match the GOV_START/GOV_STOP notifications.

Fixes 996133119f57 ("PM / devfreq: Add new passive governor")
---
 drivers/devfreq/governor_passive.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/devfreq/governor_passive.c +3 -3
index 5be96b2249e72..8e889fd805b58 100644
@@ -168,12 +168,12 @@ static int devfreq_passive_event_handler(struct devfreq *devfreq,
 			p_data->this = devfreq;
 
 		nb->notifier_call = devfreq_passive_notifier_call;
-		ret = devm_devfreq_register_notifier(dev, parent, nb,
+		ret = devfreq_register_notifier(parent, nb,
 					DEVFREQ_TRANSITION_NOTIFIER);
 		break;
 	case DEVFREQ_GOV_STOP:
-		devm_devfreq_unregister_notifier(dev, parent, nb,
-					DEVFREQ_TRANSITION_NOTIFIER);
+		WARN_ON(devfreq_unregister_notifier(parent, nb,
+					DEVFREQ_TRANSITION_NOTIFIER));
 		break;
 	default:
 		break;
Signature · 1 line
2.20.1
author maintainer
#70 lore raw

PATCH 70/129 PM / devfreq: exynos-bus: Correct clock enable sequence

In reply to Greg Kroah-Hartman

From: Kamil Konieczny <[email protected]>

[ Upstream commit 2c2b20e0da89c76759ee28c6824413ab2fa3bfc6 ]

Regulators should be enabled before clocks to avoid h/w hang. This require change in exynos_bus_probe() to move exynos_bus_parse_of() after exynos_bus_parent_parse_of() and change in error handling. Similar change is needed in exynos_bus_exit() where clock should be disabled before regulators.

---
 drivers/devfreq/exynos-bus.c | 31 +++++++++++++++++--------------
 1 file changed, 17 insertions(+), 14 deletions(-)
drivers/devfreq/exynos-bus.c +17 -14
index 1b21bb60e7975..2c8f41fbe94fb 100644
@@ -198,11 +198,10 @@ static void exynos_bus_exit(struct device *dev)
 	if (ret < 0)
 		dev_warn(dev, "failed to disable the devfreq-event devices\n");
 
-	if (bus->regulator)
-		regulator_disable(bus->regulator);
-
 	dev_pm_opp_of_remove_table(dev);
 	clk_disable_unprepare(bus->clk);
+	if (bus->regulator)
+		regulator_disable(bus->regulator);
 }
 
 /*
@@ -391,6 +390,7 @@ static int exynos_bus_probe(struct platform_device *pdev)
 	struct exynos_bus *bus;
 	int ret, max_state;
 	unsigned long min_freq, max_freq;
+	bool passive = false;
 
 	if (!np) {
 		dev_err(dev, "failed to find devicetree node\n");
@@ -404,27 +404,27 @@ static int exynos_bus_probe(struct platform_device *pdev)
 	bus->dev = &pdev->dev;
 	platform_set_drvdata(pdev, bus);
 
-	/* Parse the device-tree to get the resource information */
-	ret = exynos_bus_parse_of(np, bus);
-	if (ret < 0)
-		return ret;
-
 	profile = devm_kzalloc(dev, sizeof(*profile), GFP_KERNEL);
-	if (!profile) {
-		ret = -ENOMEM;
-		goto err;
-	}
+	if (!profile)
+		return -ENOMEM;
 
 	node = of_parse_phandle(dev->of_node, "devfreq", 0);
 	if (node) {
 		of_node_put(node);
-		goto passive;
+		passive = true;
 	} else {
 		ret = exynos_bus_parent_parse_of(np, bus);
+		if (ret < 0)
+			return ret;
 	}
 
+	/* Parse the device-tree to get the resource information */
+	ret = exynos_bus_parse_of(np, bus);
 	if (ret < 0)
-		goto err;
+		goto err_reg;
+
+	if (passive)
+		goto passive;
 
 	/* Initialize the struct profile and governor data for parent device */
 	profile->polling_ms = 50;
@@ -514,6 +514,9 @@ static int exynos_bus_probe(struct platform_device *pdev)
 err:
 	dev_pm_opp_of_remove_table(dev);
 	clk_disable_unprepare(bus->clk);
+err_reg:
+	if (!passive)
+		regulator_disable(bus->regulator);
 
 	return ret;
 }
Signature · 1 line
2.20.1
author maintainer
#71 lore raw

PATCH 71/129 media: saa7146: add cleanup in hexium_attach()

In reply to Greg Kroah-Hartman

From: Wenwen Wang <[email protected]>

[ Upstream commit 42e64117d3b4a759013f77bbcf25ab6700e55de7 ]

If saa7146_register_device() fails, no cleanup is executed, leading to memory/resource leaks. To fix this issue, perform necessary cleanup work before returning the error.

---
 drivers/media/pci/saa7146/hexium_gemini.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/media/pci/saa7146/hexium_gemini.c +3 -0
index f5fc8bcbd14b1..be85a2c4318e7 100644
@@ -304,6 +304,9 @@ static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_d
 	ret = saa7146_register_device(&hexium->video_dev, dev, "hexium gemini", VFL_TYPE_GRABBER);
 	if (ret < 0) {
 		pr_err("cannot register capture v4l2 device. skipping.\n");
+		saa7146_vv_release(dev);
+		i2c_del_adapter(&hexium->i2c_adapter);
+		kfree(hexium);
 		return ret;
 	}
 
Signature · 1 line
2.20.1
author maintainer
#72 lore raw

PATCH 72/129 media: cpia2_usb: fix memory leaks

In reply to Greg Kroah-Hartman

From: Wenwen Wang <[email protected]>

[ Upstream commit 1c770f0f52dca1a2323c594f01f5ec6f1dddc97f ]

In submit_urbs(), 'cam->sbuf[i].data' is allocated through kmalloc_array(). However, it is not deallocated if the following allocation for urbs fails. To fix this issue, free 'cam->sbuf[i].data' if usb_alloc_urb() fails.

---
 drivers/media/usb/cpia2/cpia2_usb.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/media/usb/cpia2/cpia2_usb.c +4 -0
index 21e5454d260a0..30e27844e0e99 100644
@@ -690,6 +690,10 @@ static int submit_urbs(struct camera_data *cam)
 		if (!urb) {
 			for (j = 0; j < i; j++)
 				usb_free_urb(cam->sbuf[j].urb);
+			for (j = 0; j < NUM_SBUF; j++) {
+				kfree(cam->sbuf[j].data);
+				cam->sbuf[j].data = NULL;
+			}
 			return -ENOMEM;
 		}
 
Signature · 1 line
2.20.1
author maintainer
#73 lore raw

PATCH 73/129 media: saa7134: fix terminology around saa7134_i2c_eeprom_md7134_gate()

In reply to Greg Kroah-Hartman

From: Maciej S. Szmigiero <[email protected]>

[ Upstream commit 9d802222a3405599d6e1984d9324cddf592ea1f4 ]

saa7134_i2c_eeprom_md7134_gate() function and the associated comment uses an inverted i2c gate open / closed terminology.
Let's fix this.

---
 drivers/media/pci/saa7134/saa7134-i2c.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
drivers/media/pci/saa7134/saa7134-i2c.c +8 -4
index dca0592c5f471..6f93568f56204 100644
@@ -355,7 +355,11 @@ static struct i2c_client saa7134_client_template = {
 
 /* ----------------------------------------------------------- */
 
-/* On Medion 7134 reading EEPROM needs DVB-T demod i2c gate open */
+/*
+ * On Medion 7134 reading the SAA7134 chip config EEPROM needs DVB-T
+ * demod i2c gate closed due to an address clash between this EEPROM
+ * and the demod one.
+ */
 static void saa7134_i2c_eeprom_md7134_gate(struct saa7134_dev *dev)
 {
 	u8 subaddr = 0x7, dmdregval;
@@ -372,14 +376,14 @@ static void saa7134_i2c_eeprom_md7134_gate(struct saa7134_dev *dev)
 
 	ret = i2c_transfer(&dev->i2c_adap, i2cgatemsg_r, 2);
 	if ((ret == 2) && (dmdregval & 0x2)) {
-		pr_debug("%s: DVB-T demod i2c gate was left closed\n",
+		pr_debug("%s: DVB-T demod i2c gate was left open\n",
 			 dev->name);
 
 		data[0] = subaddr;
 		data[1] = (dmdregval & ~0x2);
 		if (i2c_transfer(&dev->i2c_adap, i2cgatemsg_w, 1) != 1)
-			pr_err("%s: EEPROM i2c gate open failure\n",
-			  dev->name);
+			pr_err("%s: EEPROM i2c gate close failure\n",
+			       dev->name);
 	}
 }
 
Signature · 1 line
2.20.1
author maintainer
#74 lore raw

PATCH 74/129 media: ov9650: add a sanity check

In reply to Greg Kroah-Hartman

From: Mauro Carvalho Chehab <[email protected]>

[ Upstream commit 093347abc7a4e0490e3c962ecbde2dc272a8f708 ]

As pointed by cppcheck:

[drivers/media/i2c/ov9650.c:706]: (error) Shifting by a negative value is undefined behaviour [drivers/media/i2c/ov9650.c:707]: (error) Shifting by a negative value is undefined behaviour [drivers/media/i2c/ov9650.c:721]: (error) Shifting by a negative value is undefined behaviour

Prevent mangling with gains with invalid values.

As pointed by Sylvester, this should never happen in practice, as min value of V4L2_CID_GAIN control is 16 (gain is always >= 16 and m is always >= 0), but it is too hard for a static analyzer to get this, as the logic with validates control min/max is elsewhere inside V4L2 core.

---
 drivers/media/i2c/ov9650.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/media/i2c/ov9650.c +5 -0
index 502c72238a4a5..db962e2108adf 100644
@@ -708,6 +708,11 @@ static int ov965x_set_gain(struct ov965x *ov965x, int auto_gain)
 		for (m = 6; m >= 0; m--)
 			if (gain >= (1 << m) * 16)
 				break;
+
+		/* Sanity check: don't adjust the gain with a negative value */
+		if (m < 0)
+			return -EINVAL;
+
 		rgain = (gain - ((1 << m) * 16)) / (1 << m);
 		rgain |= (((1 << m) - 1) << 4);
 
Signature · 1 line
2.20.1
author maintainer
#75 lore raw

PATCH 75/129 ACPI / CPPC: do not require the _PSD method

In reply to Greg Kroah-Hartman

From: Al Stone <[email protected]>

[ Upstream commit 4c4cdc4c63853fee48c02e25c8605fb65a6c9924 ]

According to the ACPI 6.3 specification, the _PSD method is optional when using CPPC. The underlying assumption is that each CPU can change frequency independently from all other CPUs; _PSD is provided to tell the OS that some processors can NOT do that.

However, the acpi_get_psd() function returns ENODEV if there is no _PSD method present, or an ACPI error status if an error occurs when evaluating _PSD, if present. This makes _PSD mandatory when using CPPC, in violation of the specification, and only on Linux.

This has forced some firmware writers to provide a dummy _PSD, even though it is irrelevant, but only because Linux requires it; other OSPMs follow the spec. We really do not want to have OS specific ACPI tables, though.

So, correct acpi_get_psd() so that it does not return an error if there is no _PSD method present, but does return a failure when the method can not be executed properly. This allows _PSD to be optional as it should be.

---
 drivers/acpi/cppc_acpi.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/acpi/cppc_acpi.c +4 -2
index e0ea8f56d2bfd..9ec4618df5338 100644
@@ -360,8 +360,10 @@ static int acpi_get_psd(struct cpc_desc *cpc_ptr, acpi_handle handle)
 	union acpi_object  *psd = NULL;
 	struct acpi_psd_package *pdomain;
 
-	status = acpi_evaluate_object_typed(handle, "_PSD", NULL, &buffer,
-			ACPI_TYPE_PACKAGE);
+	status = acpi_evaluate_object_typed(handle, "_PSD", NULL,
+					    &buffer, ACPI_TYPE_PACKAGE);
+	if (status == AE_NOT_FOUND)	/* _PSD is optional */
+		return 0;
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
Signature · 1 line
2.20.1
author maintainer
#76 lore raw

PATCH 76/129 arm64: kpti: ensure patched kernel text is fetched from PoU

In reply to Greg Kroah-Hartman

From: Mark Rutland <[email protected]>

[ Upstream commit f32c7a8e45105bd0af76872bf6eef0438ff12fb2 ]

While the MMUs is disabled, I-cache speculation can result in instructions being fetched from the PoC. During boot we may patch instructions (e.g. for alternatives and jump labels), and these may be dirty at the PoU (and stale at the PoC).

Thus, while the MMU is disabled in the KPTI pagetable fixup code we may load stale instructions into the I-cache, potentially leading to subsequent crashes when executing regions of code which have been modified at runtime.

Similarly to commit:

8ec41987436d566f ("arm64: mm: ensure patched kernel text is fetched from PoU")

... we can invalidate the I-cache after enabling the MMU to prevent such issues.

The KPTI pagetable fixup code itself should be clean to the PoC per the boot protocol, so no maintenance is required for this code.

---
 arch/arm64/mm/proc.S | 9 +++++++++
 1 file changed, 9 insertions(+)
arch/arm64/mm/proc.S +9 -0
index 3ceec224d3d24..3b95e3126eebb 100644
@@ -263,6 +263,15 @@ skip_pgd:
 	msr	sctlr_el1, x18
 	isb
 
+	/*
+	 * Invalidate the local I-cache so that any instructions fetched
+	 * speculatively from the PoC are discarded, since they may have
+	 * been dynamically patched at the PoU.
+	 */
+	ic	iallu
+	dsb	nsh
+	isb
+
 	/* Set the flag to zero to indicate that we're all done */
 	str	wzr, [flag_ptr]
 	ret
Signature · 1 line
2.20.1
author maintainer
#77 lore raw

PATCH 77/129 nvmet: fix data units read and written counters in SMART log

In reply to Greg Kroah-Hartman

From: Tom Wu <[email protected]>

[ Upstream commit 3bec2e3754becebd4c452999adb49bc62c575ea4 ]

In nvme spec 1.3 there is a definition for data write/read counters from SMART log, (See section 5.14.1.2):
This value is reported in thousands (i.e., a value of 1 corresponds to 1000 units of 512 bytes read) and is rounded up.

However, in nvme target where value is reported with actual units, but not thousands of units as the spec requires.

---
 drivers/nvme/target/admin-cmd.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/nvme/target/admin-cmd.c +8 -6
index cdb7752dcbb79..446f61ba018d7 100644
@@ -47,9 +47,11 @@ static u16 nvmet_get_smart_log_nsid(struct nvmet_req *req,
 	}
 
 	host_reads = part_stat_read(ns->bdev->bd_part, ios[READ]);
-	data_units_read = part_stat_read(ns->bdev->bd_part, sectors[READ]);
+	data_units_read = DIV_ROUND_UP(part_stat_read(ns->bdev->bd_part,
+		sectors[READ]), 1000);
 	host_writes = part_stat_read(ns->bdev->bd_part, ios[WRITE]);
-	data_units_written = part_stat_read(ns->bdev->bd_part, sectors[WRITE]);
+	data_units_written = DIV_ROUND_UP(part_stat_read(ns->bdev->bd_part,
+		sectors[WRITE]), 1000);
 
 	put_unaligned_le64(host_reads, &slog->host_reads[0]);
 	put_unaligned_le64(data_units_read, &slog->data_units_read[0]);
@@ -75,11 +77,11 @@ static u16 nvmet_get_smart_log_all(struct nvmet_req *req,
 	rcu_read_lock();
 	list_for_each_entry_rcu(ns, &ctrl->subsys->namespaces, dev_link) {
 		host_reads += part_stat_read(ns->bdev->bd_part, ios[READ]);
-		data_units_read +=
-			part_stat_read(ns->bdev->bd_part, sectors[READ]);
+		data_units_read += DIV_ROUND_UP(
+			part_stat_read(ns->bdev->bd_part, sectors[READ]), 1000);
 		host_writes += part_stat_read(ns->bdev->bd_part, ios[WRITE]);
-		data_units_written +=
-			part_stat_read(ns->bdev->bd_part, sectors[WRITE]);
+		data_units_written += DIV_ROUND_UP(
+			part_stat_read(ns->bdev->bd_part, sectors[WRITE]), 1000);
 
 	}
 	rcu_read_unlock();
Signature · 1 line
2.20.1
author maintainer
#78 lore raw

PATCH 78/129 iommu/amd: Silence warnings under memory pressure

In reply to Greg Kroah-Hartman

From: Qian Cai <[email protected]>

[ Upstream commit 3d708895325b78506e8daf00ef31549476e8586a ]

When running heavy memory pressure workloads, the system is throwing endless warnings,

smartpqi 0000:23:00.0: AMD-Vi: IOMMU mapping error in map_sg (io-pages:
5 reason: -12)

Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40
07/10/2019
swapper/10: page allocation failure: order:0, mode:0xa20(GFP_ATOMIC),
nodemask=(null),cpuset=/,mems_allowed=0,4
Call Trace:
 <IRQ>
 dump_stack+0x62/0x9a
 warn_alloc.cold.43+0x8a/0x148
 __alloc_pages_nodemask+0x1a5c/0x1bb0
 get_zeroed_page+0x16/0x20
 iommu_map_page+0x477/0x540
 map_sg+0x1ce/0x2f0
 scsi_dma_map+0xc6/0x160
 pqi_raid_submit_scsi_cmd_with_io_request+0x1c3/0x470 [smartpqi]
 do_IRQ+0x81/0x170
 common_interrupt+0xf/0xf
 </IRQ>

because the allocation could fail from iommu_map_page(), and the volume of this call could be huge which may generate a lot of serial console output and cosumes all CPUs.

Fix it by silencing the warning in this call site, and there is still a dev_err() later to notify the failure.

---
 drivers/iommu/amd_iommu.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/iommu/amd_iommu.c +3 -1
index dd7880de7e4e9..e81acb2b6ee7d 100644
@@ -2595,7 +2595,9 @@ static int map_sg(struct device *dev, struct scatterlist *sglist,
 
 			bus_addr  = address + s->dma_address + (j << PAGE_SHIFT);
 			phys_addr = (sg_phys(s) & PAGE_MASK) + (j << PAGE_SHIFT);
-			ret = iommu_map_page(domain, bus_addr, phys_addr, PAGE_SIZE, prot, GFP_ATOMIC);
+			ret = iommu_map_page(domain, bus_addr, phys_addr,
+					     PAGE_SIZE, prot,
+					     GFP_ATOMIC | __GFP_NOWARN);
 			if (ret)
 				goto out_unmap;
 
Signature · 1 line
2.20.1
author maintainer
#79 lore raw

PATCH 79/129 libtraceevent: Change users plugin directory

In reply to Greg Kroah-Hartman

From: Tzvetomir Stoyanov <[email protected]>

[ Upstream commit e97fd1383cd77c467d2aed7fa4e596789df83977 ]

To be compliant with XDG user directory layout, the user's plugin directory is changed from ~/.traceevent/plugins to ~/.local/lib/traceevent/plugins/

---
 tools/lib/traceevent/Makefile       | 6 +++---
 tools/lib/traceevent/event-plugin.c | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)
tools/lib/traceevent/Makefile +3 -3
index 7851df1490e0a..cc3315da6dc39 100644
@@ -54,15 +54,15 @@ set_plugin_dir := 1
 
 # Set plugin_dir to preffered global plugin location
 # If we install under $HOME directory we go under
-# $(HOME)/.traceevent/plugins
+# $(HOME)/.local/lib/traceevent/plugins
 #
 # We dont set PLUGIN_DIR in case we install under $HOME
 # directory, because by default the code looks under:
-# $(HOME)/.traceevent/plugins by default.
+# $(HOME)/.local/lib/traceevent/plugins by default.
 #
 ifeq ($(plugin_dir),)
 ifeq ($(prefix),$(HOME))
-override plugin_dir = $(HOME)/.traceevent/plugins
+override plugin_dir = $(HOME)/.local/lib/traceevent/plugins
 set_plugin_dir := 0
 else
 override plugin_dir = $(libdir)/traceevent/plugins
tools/lib/traceevent/event-plugin.c +1 -1
index a16756ae35267..5fe7889606a23 100644
@@ -30,7 +30,7 @@
 #include "event-parse.h"
 #include "event-utils.h"
 
-#define LOCAL_PLUGIN_DIR ".traceevent/plugins"
+#define LOCAL_PLUGIN_DIR ".local/lib/traceevent/plugins/"
 
 static struct registered_plugin_options {
 	struct registered_plugin_options	*next;
Signature · 1 line
2.20.1
author maintainer
#80 lore raw

PATCH 80/129 ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks

In reply to Greg Kroah-Hartman

From: Marek Szyprowski <[email protected]>

[ Upstream commit 5b0eeeaa37615df37a9a30929b73e9defe61ca84 ]

Commit aff138bf8e37 ("ARM: dts: exynos: Add TMU nodes regulator supply for Peach boards") assigned LDO10 to Exynos Thermal Measurement Unit, but it turned out that it supplies also some other critical parts and board freezes/crashes when it is turned off.

The mentioned commit made Exynos TMU a consumer of that regulator and in typical case Exynos TMU driver keeps it enabled from early boot. However there are such configurations (example is multi_v7_defconfig), in which some of the regulators are compiled as modules and are not available from early boot. In such case it may happen that LDO10 is turned off by regulator core, because it has no consumers yet (in this case consumer drivers cannot get it, because the supply regulators for it are not yet available). This in turn causes the board to crash. This patch restores 'always-on' property for the LDO10 regulator.

Fixes aff138bf8e37 ("ARM: dts: exynos: Add TMU nodes regulator supply for Peach boards")
---
 arch/arm/boot/dts/exynos5420-peach-pit.dts | 1 +
 arch/arm/boot/dts/exynos5800-peach-pi.dts  | 1 +
 2 files changed, 2 insertions(+)
arch/arm/boot/dts/exynos5420-peach-pit.dts +1 -0
index ec4a00f1ce01e..8b754ae8c8f7d 100644
@@ -427,6 +427,7 @@
 				regulator-name = "vdd_ldo10";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
arch/arm/boot/dts/exynos5800-peach-pi.dts +1 -0
index 01f466816fea7..1f90df2d7ecd8 100644
@@ -427,6 +427,7 @@
 				regulator-name = "vdd_ldo10";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
Signature · 1 line
2.20.1
author maintainer
#81 lore raw

PATCH 81/129 ACPI: custom_method: fix memory leaks

In reply to Greg Kroah-Hartman

From: Wenwen Wang <[email protected]>

[ Upstream commit 03d1571d9513369c17e6848476763ebbd10ec2cb ]

In cm_write(), 'buf' is allocated through kzalloc(). In the following execution, if an error occurs, 'buf' is not deallocated, leading to memory leaks. To fix this issue, free 'buf' before returning the error.

Fixes 526b4af47f44 ("ACPI: Split out custom_method functionality into an own driver")
---
 drivers/acpi/custom_method.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/acpi/custom_method.c +4 -1
index c68e72414a67a..435bd0ffc8c02 100644
@@ -48,8 +48,10 @@ static ssize_t cm_write(struct file *file, const char __user * user_buf,
 	if ((*ppos > max_size) ||
 	    (*ppos + count > max_size) ||
 	    (*ppos + count < count) ||
-	    (count > uncopied_bytes))
+	    (count > uncopied_bytes)) {
+		kfree(buf);
 		return -EINVAL;
+	}
 
 	if (copy_from_user(buf + (*ppos), user_buf, count)) {
 		kfree(buf);
@@ -69,6 +71,7 @@ static ssize_t cm_write(struct file *file, const char __user * user_buf,
 		add_taint(TAINT_OVERRIDDEN_ACPI_TABLE, LOCKDEP_NOW_UNRELIABLE);
 	}
 
+	kfree(buf);
 	return count;
 }
 
Signature · 1 line
2.20.1
author maintainer
#82 lore raw

PATCH 82/129 ACPI / PCI: fix acpi_pci_irq_enable() memory leak

In reply to Greg Kroah-Hartman

From: Wenwen Wang <[email protected]>

[ Upstream commit 29b49958cf73b439b17fa29e9a25210809a6c01c ]

In acpi_pci_irq_enable(), 'entry' is allocated by kzalloc() in acpi_pci_irq_check_entry() (invoked from acpi_pci_irq_lookup()). However, it is not deallocated if acpi_pci_irq_valid() returns false, leading to a memory leak. To fix this issue, free 'entry' before returning 0.

Fixes e237a5518425 ("x86/ACPI/PCI: Recognize that Interrupt Line 255 means "not connected"")
---
 drivers/acpi/pci_irq.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/acpi/pci_irq.c +3 -1
index c576a6fe4ebb3..94ded9513c73b 100644
@@ -462,8 +462,10 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
 		 * No IRQ known to the ACPI subsystem - maybe the BIOS /
 		 * driver reported one, then use it. Exit in any case.
 		 */
-		if (!acpi_pci_irq_valid(dev, pin))
+		if (!acpi_pci_irq_valid(dev, pin)) {
+			kfree(entry);
 			return 0;
+		}
 
 		if (acpi_isa_register_gsi(dev))
 			dev_warn(&dev->dev, "PCI INT %c: no GSI\n",
Signature · 1 line
2.20.1
author maintainer
#83 lore raw

PATCH 83/129 hwmon: (acpi_power_meter) Change log level for unsafe software power cap

In reply to Greg Kroah-Hartman

From: Wang Shenran <[email protected]>

[ Upstream commit 6e4d91aa071810deac2cd052161aefb376ecf04e ]

At boot time, the acpi_power_meter driver logs the following error level
message: "Ignoring unsafe software power cap". Having read about it from a few sources, it seems that the error message can be quite misleading.

While the message can imply that Linux is ignoring the fact that the system is operating in potentially dangerous conditions, the truth is the driver found an ACPI_PMC object that supports software power capping. The driver simply decides not to use it, perhaps because it doesn't support the object.

The best solution is probably changing the log level from error to warning. All sources I have found, regarding the error, have downplayed its significance. There is not much of a reason for it to be on error level, while causing potential confusions or misinterpretations.

---
 drivers/hwmon/acpi_power_meter.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/hwmon/acpi_power_meter.c +2 -2
index 579bdf93be433..e27f7e12c05bb 100644
@@ -693,8 +693,8 @@ static int setup_attrs(struct acpi_power_meter_resource *resource)
 
 	if (resource->caps.flags & POWER_METER_CAN_CAP) {
 		if (!can_cap_in_hardware()) {
-			dev_err(&resource->acpi_dev->dev,
-				"Ignoring unsafe software power cap!\n");
+			dev_warn(&resource->acpi_dev->dev,
+				 "Ignoring unsafe software power cap!\n");
 			goto skip_unsafe_cap;
 		}
 
Signature · 1 line
2.20.1
author maintainer
#84 lore raw

PATCH 84/129 md/raid1: fail run raid1 array when active disk less than one

In reply to Greg Kroah-Hartman

From: Yufen Yu <[email protected]>

[ Upstream commit 07f1a6850c5d5a65c917c3165692b5179ac4cb6b ]

When run test case:
mdadm -CR /dev/md1 -l 1 -n 4 /dev/sd[a-d] --assume-clean --bitmap=internal mdadm -S /dev/md1
mdadm -A /dev/md1 /dev/sd[b-c] --run --force

  mdadm --zero /dev/sda
  mdadm /dev/md1 -a /dev/sda

echo offline > /sys/block/sdc/device/state
echo offline > /sys/block/sdb/device/state
sleep 5
mdadm -S /dev/md1

  echo running > /sys/block/sdb/device/state
  echo running > /sys/block/sdc/device/state
  mdadm -A /dev/md1 /dev/sd[a-c] --run --force

mdadm run fail with kernel message as follow:

[  172.986064] md: kicking non-fresh sdb from array!
[  173.004210] md: kicking non-fresh sdc from array!
[  173.022383] md/raid1:md1: active with 0 out of 4 mirrors
[  173.022406] md1: failed to create bitmap (-5)

In fact, when active disk in raid1 array less than one, we need to return fail in raid1_run().

---
 drivers/md/raid1.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
drivers/md/raid1.c +12 -1
index 53048bf0b2b81..9892c41de4419 100644
@@ -2960,6 +2960,13 @@ static int raid1_run(struct mddev *mddev)
 		    !test_bit(In_sync, &conf->mirrors[i].rdev->flags) ||
 		    test_bit(Faulty, &conf->mirrors[i].rdev->flags))
 			mddev->degraded++;
+	/*
+	 * RAID1 needs at least one disk in active
+	 */
+	if (conf->raid_disks - mddev->degraded < 1) {
+		ret = -EINVAL;
+		goto abort;
+	}
 
 	if (conf->raid_disks - mddev->degraded == 1)
 		mddev->recovery_cp = MaxSector;
@@ -2994,8 +3001,12 @@ static int raid1_run(struct mddev *mddev)
 	ret =  md_integrity_register(mddev);
 	if (ret) {
 		md_unregister_thread(&mddev->thread);
-		raid1_free(mddev, conf);
+		goto abort;
 	}
+	return 0;
+
+abort:
+	raid1_free(mddev, conf);
 	return ret;
 }
 
Signature · 1 line
2.20.1
author maintainer
#85 lore raw

PATCH 85/129 dmaengine: ti: edma: Do not reset reserved paRAM slots

In reply to Greg Kroah-Hartman

From: Peter Ujfalusi <[email protected]>

[ Upstream commit c5dbe60664b3660f5ac5854e21273ea2e7ff698f ]

Skip resetting paRAM slots marked as reserved as they might be used by other cores.

---
 drivers/dma/edma.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/dma/edma.c +6 -3
index 57962bff75324..72f31e837b1d5 100644
@@ -2268,9 +2268,6 @@ static int edma_probe(struct platform_device *pdev)
 
 	ecc->default_queue = info->default_queue;
 
-	for (i = 0; i < ecc->num_slots; i++)
-		edma_write_slot(ecc, i, &dummy_paramset);
-
 	if (info->rsv) {
 		/* Set the reserved slots in inuse list */
 		rsv_slots = info->rsv->rsv_slots;
@@ -2283,6 +2280,12 @@ static int edma_probe(struct platform_device *pdev)
 		}
 	}
 
+	for (i = 0; i < ecc->num_slots; i++) {
+		/* Reset only unused - not reserved - paRAM slots */
+		if (!test_bit(i, ecc->slot_inuse))
+			edma_write_slot(ecc, i, &dummy_paramset);
+	}
+
 	/* Clear the xbar mapped channels in unused list */
 	xbar_chans = info->xbar_chans;
 	if (xbar_chans) {
Signature · 1 line
2.20.1
author maintainer
#86 lore raw

PATCH 86/129 kprobes: Prohibit probing on BUG() and WARN() address

In reply to Greg Kroah-Hartman

From: Masami Hiramatsu <[email protected]>

[ Upstream commit e336b4027775cb458dc713745e526fa1a1996b2a ]

Since BUG() and WARN() may use a trap (e.g. UD2 on x86) to get the address where the BUG() has occurred, kprobes can not do single-step out-of-line that instruction. So prohibit probing on such address.

Without this fix, if someone put a kprobe on WARN(), the kernel will crash with invalid opcode error instead of outputing warning message, because kernel can not find correct bug address.

---
 include/linux/bug.h | 5 +++++
 kernel/kprobes.c    | 3 ++-
 2 files changed, 7 insertions(+), 1 deletion(-)
include/linux/bug.h +5 -0
index 292d6a10b0c26..0faae96302bda 100644
@@ -114,6 +114,11 @@ int is_valid_bugaddr(unsigned long addr);
 
 #else	/* !CONFIG_GENERIC_BUG */
 
+static inline void *find_bug(unsigned long bugaddr)
+{
+	return NULL;
+}
+
 static inline enum bug_trap_type report_bug(unsigned long bug_addr,
 					    struct pt_regs *regs)
 {
kernel/kprobes.c +2 -1
index e2845dd53b30b..11863e2b01c25 100644
@@ -1454,7 +1454,8 @@ static int check_kprobe_address_safe(struct kprobe *p,
 	/* Ensure it is not in reserved area nor out of text */
 	if (!kernel_text_address((unsigned long) p->addr) ||
 	    within_kprobe_blacklist((unsigned long) p->addr) ||
-	    jump_label_text_reserved(p->addr, p->addr)) {
+	    jump_label_text_reserved(p->addr, p->addr) ||
+	    find_bug((unsigned long)p->addr)) {
 		ret = -EINVAL;
 		goto out;
 	}
Signature · 1 line
2.20.1
author maintainer
#87 lore raw

PATCH 87/129 s390/crypto: xts-aes-s390 fix extra run-time crypto self tests finding

In reply to Greg Kroah-Hartman

From: Harald Freudenberger <[email protected]>

[ Upstream commit 9e323d45ba94262620a073a3f9945ca927c07c71 ]

With 'extra run-time crypto self tests' enabled, the selftest for s390-xts fails with

alg: skcipher: xts-aes-s390 encryption unexpectedly succeeded on test vector "random: len=0 klen=64"; expected_error=-22, cfg="random: inplace use_digest nosimd src_divs=[2.61%@+4006, 84.44%@+21, 1.55%@+13, 4.50%@+344, 4.26%@+21, 2.64%@+27]"

This special case with nbytes=0 is not handled correctly and this fix now makes sure that -EINVAL is returned when there is en/decrypt called with 0 bytes to en/decrypt.

---
 arch/s390/crypto/aes_s390.c | 6 ++++++
 1 file changed, 6 insertions(+)
arch/s390/crypto/aes_s390.c +6 -0
index 591cbdf615af0..1a906dd7ca7d9 100644
@@ -572,6 +572,9 @@ static int xts_aes_encrypt(struct blkcipher_desc *desc,
 	struct s390_xts_ctx *xts_ctx = crypto_blkcipher_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 
+	if (!nbytes)
+		return -EINVAL;
+
 	if (unlikely(!xts_ctx->fc))
 		return xts_fallback_encrypt(desc, dst, src, nbytes);
 
@@ -586,6 +589,9 @@ static int xts_aes_decrypt(struct blkcipher_desc *desc,
 	struct s390_xts_ctx *xts_ctx = crypto_blkcipher_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 
+	if (!nbytes)
+		return -EINVAL;
+
 	if (unlikely(!xts_ctx->fc))
 		return xts_fallback_decrypt(desc, dst, src, nbytes);
 
Signature · 1 line
2.20.1
author maintainer
#88 lore raw

PATCH 88/129 ASoC: dmaengine: Make the pcm->name equal to pcm->id if the name is not set

In reply to Greg Kroah-Hartman

From: Peter Ujfalusi <[email protected]>

[ Upstream commit 2ec42f3147e1610716f184b02e65d7f493eed925 ]

Some tools use the snd_pcm_info_get_name() to try to identify PCMs or for other purposes.

Currently it is left empty with the dmaengine-pcm, in this case copy the pcm->id string as pcm->name.

For example IGT is using this to find the HDMI PCM for testing audio on it.

---
 sound/soc/soc-generic-dmaengine-pcm.c | 6 ++++++
 1 file changed, 6 insertions(+)
sound/soc/soc-generic-dmaengine-pcm.c +6 -0
index 6cef3977507ae..67d22b4baeb05 100644
@@ -312,6 +312,12 @@ static int dmaengine_pcm_new(struct snd_soc_pcm_runtime *rtd)
 
 		if (!dmaengine_pcm_can_report_residue(dev, pcm->chan[i]))
 			pcm->flags |= SND_DMAENGINE_PCM_FLAG_NO_RESIDUE;
+
+		if (rtd->pcm->streams[i].pcm->name[0] == '\0') {
+			strncpy(rtd->pcm->streams[i].pcm->name,
+				rtd->pcm->streams[i].pcm->id,
+				sizeof(rtd->pcm->streams[i].pcm->name));
+		}
 	}
 
 	return 0;
Signature · 1 line
2.20.1
author maintainer
#89 lore raw

PATCH 89/129 mmc: sdhci: Fix incorrect switch to HS mode

In reply to Greg Kroah-Hartman

From: Al Cooper <[email protected]>

[ Upstream commit c894e33ddc1910e14d6f2a2016f60ab613fd8b37 ]

When switching from any MMC speed mode that requires 1.8v (HS200, HS400 and HS400ES) to High Speed (HS) mode, the system ends up configured for SDR12 with a 50MHz clock which is an illegal mode.

This happens because the SDHCI_CTRL_VDD_180 bit in the SDHCI_HOST_CONTROL2 register is left set and when this bit is set, the speed mode is controlled by the SDHCI_CTRL_UHS field in the SDHCI_HOST_CONTROL2 register. The SDHCI_CTRL_UHS field will end up being set to 0 (SDR12) by sdhci_set_uhs_signaling() because there is no UHS mode being set.

The fix is to change sdhci_set_uhs_signaling() to set the SDHCI_CTRL_UHS field to SDR25 (which is the same as HS) for any switch to HS mode.

This was found on a new eMMC controller that does strict checking of the speed mode and the corresponding clock rate. It caused the switch to HS400 mode to fail because part of the sequence to switch to HS400 requires a switch from HS200 to HS before going to HS400.

---
 drivers/mmc/host/sdhci.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/mmc/host/sdhci.c +3 -1
index df306caba296a..0347742a495a6 100644
@@ -1557,7 +1557,9 @@ void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing)
 		ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
 	else if (timing == MMC_TIMING_UHS_SDR12)
 		ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
-	else if (timing == MMC_TIMING_UHS_SDR25)
+	else if (timing == MMC_TIMING_SD_HS ||
+		 timing == MMC_TIMING_MMC_HS ||
+		 timing == MMC_TIMING_UHS_SDR25)
 		ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
 	else if (timing == MMC_TIMING_UHS_SDR50)
 		ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
Signature · 1 line
2.20.1
author maintainer
#90 lore raw

PATCH 90/129 libertas: Add missing sentinel at end of if_usb.c fw_table

In reply to Greg Kroah-Hartman

From: Kevin Easton <[email protected]>

[ Upstream commit 764f3f1ecffc434096e0a2b02f1a6cc964a89df6 ]

This sentinel tells the firmware loading process when to stop.

---
 drivers/net/wireless/marvell/libertas/if_usb.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/wireless/marvell/libertas/if_usb.c +2 -1
index a605d569f663a..9d147b11ee516 100644
@@ -49,7 +49,8 @@ static const struct lbs_fw_table fw_table[] = {
 	{ MODEL_8388, "libertas/usb8388_v5.bin", NULL },
 	{ MODEL_8388, "libertas/usb8388.bin", NULL },
 	{ MODEL_8388, "usb8388.bin", NULL },
-	{ MODEL_8682, "libertas/usb8682.bin", NULL }
+	{ MODEL_8682, "libertas/usb8682.bin", NULL },
+	{ 0, NULL, NULL }
 };
 
 static struct usb_device_id if_usb_table[] = {
Signature · 1 line
2.20.1
author maintainer
#91 lore raw

PATCH 91/129 e1000e: add workaround for possible stalled packet

In reply to Greg Kroah-Hartman

From: Kai-Heng Feng <[email protected]>

[ Upstream commit e5e9a2ecfe780975820e157b922edee715710b66 ]

This works around a possible stalled packet issue, which may occur due to clock recovery from the PCH being too slow, when the LAN is transitioning from K1 at 1G link speed.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204057

---
 drivers/net/ethernet/intel/e1000e/ich8lan.c | 10 ++++++++++
 drivers/net/ethernet/intel/e1000e/ich8lan.h |  2 +-
 2 files changed, 11 insertions(+), 1 deletion(-)
drivers/net/ethernet/intel/e1000e/ich8lan.c +10 -0
index dc7d671b903c5..625008e8cb0df 100644
@@ -1447,6 +1447,16 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 			else
 				phy_reg |= 0xFA;
 			e1e_wphy_locked(hw, I217_PLL_CLOCK_GATE_REG, phy_reg);
+
+			if (speed == SPEED_1000) {
+				hw->phy.ops.read_reg_locked(hw, HV_PM_CTRL,
+							    &phy_reg);
+
+				phy_reg |= HV_PM_CTRL_K1_CLK_REQ;
+
+				hw->phy.ops.write_reg_locked(hw, HV_PM_CTRL,
+							     phy_reg);
+			}
 		}
 		hw->phy.ops.release(hw);
 
drivers/net/ethernet/intel/e1000e/ich8lan.h +1 -1
index 67163ca898ba2..6374c8fc76a8d 100644
@@ -227,7 +227,7 @@
 
 /* PHY Power Management Control */
 #define HV_PM_CTRL		PHY_REG(770, 17)
-#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA	0x100
+#define HV_PM_CTRL_K1_CLK_REQ		0x200
 #define HV_PM_CTRL_K1_ENABLE		0x4000
 
 #define I217_PLL_CLOCK_GATE_REG	PHY_REG(772, 28)
Signature · 1 line
2.20.1
author maintainer
#92 lore raw

PATCH 92/129 drm/amd/powerplay/smu7: enforce minimal VBITimeout (v2)

In reply to Greg Kroah-Hartman

From: Ahzo <[email protected]>

[ Upstream commit f659bb6dae58c113805f92822e4c16ddd3156b79 ]

This fixes screen corruption/flickering on 75 Hz displays.

v2: make print statement debug only (Alex)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102646

---
 drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +5 -0
index 3907439417e76..c0db3b57dfe58 100644
@@ -3739,6 +3739,11 @@ int smu7_program_display_gap(struct pp_hwmgr *hwmgr)
 
 	data->frame_time_x2 = frame_time_in_us * 2 / 100;
 
+	if (data->frame_time_x2 < 280) {
+		pr_debug("%s: enforce minimal VBITimeout: %d -> 280\n", __func__, data->frame_time_x2);
+		data->frame_time_x2 = 280;
+	}
+
 	display_gap2 = pre_vbi_time_in_us * (ref_clock / 100);
 
 	cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_DISPLAY_GAP_CNTL2, display_gap2);
Signature · 1 line
2.20.1
author maintainer
#93 lore raw

PATCH 93/129 media: ttusb-dec: Fix info-leak in ttusb_dec_send_command()

In reply to Greg Kroah-Hartman

From: Tomas Bortoli <[email protected]>

[ Upstream commit a10feaf8c464c3f9cfdd3a8a7ce17e1c0d498da1 ]

The function at issue does not always initialize each byte allocated for 'b' and can therefore leak uninitialized memory to a USB device in the call to usb_bulk_msg()

Use kzalloc() instead of kmalloc()

---
 drivers/media/usb/ttusb-dec/ttusb_dec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/usb/ttusb-dec/ttusb_dec.c +1 -1
index 4e7671a3a1e4a..d7397c0d7f869 100644
@@ -278,7 +278,7 @@ static int ttusb_dec_send_command(struct ttusb_dec *dec, const u8 command,
 
 	dprintk("%s\n", __func__);
 
-	b = kmalloc(COMMAND_PACKET_SIZE + 4, GFP_KERNEL);
+	b = kzalloc(COMMAND_PACKET_SIZE + 4, GFP_KERNEL);
 	if (!b)
 		return -ENOMEM;
 
Signature · 1 line
2.20.1
author maintainer
#94 lore raw

PATCH 94/129 ALSA: hda/realtek - Blacklist PC beep for Lenovo ThinkCentre M73/93

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

[ Upstream commit 051c78af14fcd74a22b5af45548ad9d588247cc7 ]

Lenovo ThinkCentre M73 and M93 don't seem to have a proper beep although the driver tries to probe and set up blindly. Blacklist these machines for suppressing the beep creation.

---
 sound/pci/hda/patch_realtek.c | 3 +++
 1 file changed, 3 insertions(+)
sound/pci/hda/patch_realtek.c +3 -0
index 31322aeebcff0..d45c85dcf9d9d 100644
@@ -969,6 +969,9 @@ static const struct snd_pci_quirk beep_white_list[] = {
 	SND_PCI_QUIRK(0x1043, 0x834a, "EeePC", 1),
 	SND_PCI_QUIRK(0x1458, 0xa002, "GA-MA790X", 1),
 	SND_PCI_QUIRK(0x8086, 0xd613, "Intel", 1),
+	/* blacklist -- no beep available */
+	SND_PCI_QUIRK(0x17aa, 0x309e, "Lenovo ThinkCentre M73", 0),
+	SND_PCI_QUIRK(0x17aa, 0x30a3, "Lenovo ThinkCentre M93", 0),
 	{}
 };
 
Signature · 1 line
2.20.1
author maintainer
#95 lore raw

PATCH 95/129 btrfs: extent-tree: Make sure we only allocate extents from block groups with the same type

In reply to Greg Kroah-Hartman

From: Qu Wenruo <[email protected]>

[ Upstream commit 2a28468e525f3924efed7f29f2bc5a2926e7e19a ]

[BUG]
With fuzzed image and MIXED_GROUPS super flag, we can hit the following BUG_ON():

kernel BUG at fs/btrfs/delayed-ref.c:491!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI

  CPU: 0 PID: 1849 Comm: sync Tainted: G           O      5.2.0-custom #27
  RIP: 0010:update_existing_head_ref.cold+0x44/0x46 [btrfs]
  Call Trace:
   add_delayed_ref_head+0x20c/0x2d0 [btrfs]
   btrfs_add_delayed_tree_ref+0x1fc/0x490 [btrfs]
   btrfs_free_tree_block+0x123/0x380 [btrfs]
   __btrfs_cow_block+0x435/0x500 [btrfs]
   btrfs_cow_block+0x110/0x240 [btrfs]
   btrfs_search_slot+0x230/0xa00 [btrfs]
   ? __lock_acquire+0x105e/0x1e20
   btrfs_insert_empty_items+0x67/0xc0 [btrfs]
   alloc_reserved_file_extent+0x9e/0x340 [btrfs]
   __btrfs_run_delayed_refs+0x78e/0x1240 [btrfs]
   ? kvm_clock_read+0x18/0x30
   ? __sched_clock_gtod_offset+0x21/0x50
   btrfs_run_delayed_refs.part.0+0x4e/0x180 [btrfs]
   btrfs_run_delayed_refs+0x23/0x30 [btrfs]
   btrfs_commit_transaction+0x53/0x9f0 [btrfs]
   btrfs_sync_fs+0x7c/0x1c0 [btrfs]
   ? __ia32_sys_fdatasync+0x20/0x20
   sync_fs_one_sb+0x23/0x30
   iterate_supers+0x95/0x100
   ksys_sync+0x62/0xb0
   __ia32_sys_sync+0xe/0x20
   do_syscall_64+0x65/0x240
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

[CAUSE]
This situation is caused by several factors:
- Fuzzed image
The extent tree of this fs missed one backref for extent tree root. So we can allocated space from that slot.

- MIXED_BG feature
Super block has MIXED_BG flag.

- No mixed block groups exists
All block groups are just regular ones.

This makes data space_info->block_groups[] contains metadata block groups. And when we reserve space for data, we can use space in metadata block group.

Then we hit the following file operations:

- fallocate
We need to allocate data extents.
find_free_extent() choose to use the metadata block to allocate space from, and choose the space of extent tree root, since its backref is missing.

This generate one delayed ref head with is_data = 1.

- extent tree update
We need to update extent tree at run_delayed_ref time.

This generate one delayed ref head with is_data = 0, for the same bytenr of old extent tree root.

Then we trigger the BUG_ON().

[FIX]
The quick fix here is to check block_group->flags before using it.

The problem can only happen for MIXED_GROUPS fs. Regular filesystems won't have space_info with DATA|METADATA flag, and no way to hit the bug.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203255

---
 fs/btrfs/extent-tree.c | 8 ++++++++
 1 file changed, 8 insertions(+)
fs/btrfs/extent-tree.c +8 -0
index 7938c48c72ff0..f3a2512344743 100644
@@ -7571,6 +7571,14 @@ static noinline int find_free_extent(struct btrfs_root *orig_root,
 			 */
 			if ((flags & extra) && !(block_group->flags & extra))
 				goto loop;
+
+			/*
+			 * This block group has different flags than we want.
+			 * It's possible that we have MIXED_GROUP flag but no
+			 * block group is mixed.  Just skip such block group.
+			 */
+			btrfs_release_block_group(block_group, delalloc);
+			continue;
 		}
 
 have_block_group:
Signature · 1 line
2.20.1
author maintainer
#96 lore raw

PATCH 96/129 media: omap3isp: Set device on omap3isp subdevs

In reply to Greg Kroah-Hartman

From: Sakari Ailus <[email protected]>

[ Upstream commit e9eb103f027725053a4b02f93d7f2858b56747ce ]

The omap3isp driver registered subdevs without the dev field being set. Do that now.

---
 drivers/media/platform/omap3isp/ispccdc.c    | 1 +
 drivers/media/platform/omap3isp/ispccp2.c    | 1 +
 drivers/media/platform/omap3isp/ispcsi2.c    | 1 +
 drivers/media/platform/omap3isp/isppreview.c | 1 +
 drivers/media/platform/omap3isp/ispresizer.c | 1 +
 drivers/media/platform/omap3isp/ispstat.c    | 2 ++
 6 files changed, 7 insertions(+)
drivers/media/platform/omap3isp/ispccdc.c +1 -0
index 882310eb45ccf..fe16fbd95221f 100644
@@ -2608,6 +2608,7 @@ int omap3isp_ccdc_register_entities(struct isp_ccdc_device *ccdc,
 	int ret;
 
 	/* Register the subdev and video node. */
+	ccdc->subdev.dev = vdev->mdev->dev;
 	ret = v4l2_device_register_subdev(vdev, &ccdc->subdev);
 	if (ret < 0)
 		goto error;
drivers/media/platform/omap3isp/ispccp2.c +1 -0
index ca095238510d5..b64e218eaea6e 100644
@@ -1030,6 +1030,7 @@ int omap3isp_ccp2_register_entities(struct isp_ccp2_device *ccp2,
 	int ret;
 
 	/* Register the subdev and video nodes. */
+	ccp2->subdev.dev = vdev->mdev->dev;
 	ret = v4l2_device_register_subdev(vdev, &ccp2->subdev);
 	if (ret < 0)
 		goto error;
drivers/media/platform/omap3isp/ispcsi2.c +1 -0
index f75a1be29d84a..27a2913363b62 100644
@@ -1206,6 +1206,7 @@ int omap3isp_csi2_register_entities(struct isp_csi2_device *csi2,
 	int ret;
 
 	/* Register the subdev and video nodes. */
+	csi2->subdev.dev = vdev->mdev->dev;
 	ret = v4l2_device_register_subdev(vdev, &csi2->subdev);
 	if (ret < 0)
 		goto error;
drivers/media/platform/omap3isp/isppreview.c +1 -0
index ac30a0f837801..e981eb2330f18 100644
@@ -2228,6 +2228,7 @@ int omap3isp_preview_register_entities(struct isp_prev_device *prev,
 	int ret;
 
 	/* Register the subdev and video nodes. */
+	prev->subdev.dev = vdev->mdev->dev;
 	ret = v4l2_device_register_subdev(vdev, &prev->subdev);
 	if (ret < 0)
 		goto error;
drivers/media/platform/omap3isp/ispresizer.c +1 -0
index 0b6a87508584f..2035e3c6a9dee 100644
@@ -1684,6 +1684,7 @@ int omap3isp_resizer_register_entities(struct isp_res_device *res,
 	int ret;
 
 	/* Register the subdev and video nodes. */
+	res->subdev.dev = vdev->mdev->dev;
 	ret = v4l2_device_register_subdev(vdev, &res->subdev);
 	if (ret < 0)
 		goto error;
drivers/media/platform/omap3isp/ispstat.c +2 -0
index 1b9217d3b1b6a..4a4ae637655ba 100644
@@ -1010,6 +1010,8 @@ void omap3isp_stat_unregister_entities(struct ispstat *stat)
 int omap3isp_stat_register_entities(struct ispstat *stat,
 				    struct v4l2_device *vdev)
 {
+	stat->subdev.dev = vdev->mdev->dev;
+
 	return v4l2_device_register_subdev(vdev, &stat->subdev);
 }
 
Signature · 1 line
2.20.1
author maintainer
#97 lore raw

PATCH 97/129 PM / devfreq: passive: fix compiler warning

In reply to Greg Kroah-Hartman

From: MyungJoo Ham <[email protected]>

[ Upstream commit 0465814831a926ce2f83e8f606d067d86745234e ]

The recent commit of
PM / devfreq: passive: Use non-devm notifiers had incurred compiler warning, "unused variable 'dev'".

---
 drivers/devfreq/governor_passive.c | 1 -
 1 file changed, 1 deletion(-)
drivers/devfreq/governor_passive.c +0 -1
index 8e889fd805b58..62c262fc2178d 100644
@@ -152,7 +152,6 @@ static int devfreq_passive_notifier_call(struct notifier_block *nb,
 static int devfreq_passive_event_handler(struct devfreq *devfreq,
 				unsigned int event, void *data)
 {
-	struct device *dev = devfreq->dev.parent;
 	struct devfreq_passive_data *p_data
 			= (struct devfreq_passive_data *)devfreq->data;
 	struct devfreq *parent = (struct devfreq *)p_data->parent;
Signature · 1 line
2.20.1
author maintainer
#98 lore raw

PATCH 98/129 ALSA: firewire-tascam: handle error code when getting current source of clock

In reply to Greg Kroah-Hartman

From: Takashi Sakamoto <[email protected]>

commit 2617120f4de6d0423384e0e86b14c78b9de84d5a upstream.

The return value of snd_tscm_stream_get_clock() is ignored. This commit checks the value and handle error.

Fixes e453df44f0d6 ("ALSA: firewire-tascam: add PCM functionality")
Cc <[email protected]> # v4.4+
---
 sound/firewire/tascam/tascam-pcm.c |    3 +++
 1 file changed, 3 insertions(+)
sound/firewire/tascam/tascam-pcm.c +3 -0
@@ -81,6 +81,9 @@ static int pcm_open(struct snd_pcm_subst
 		goto err_locked;
 
 	err = snd_tscm_stream_get_clock(tscm, &clock);
+	if (err < 0)
+		goto err_locked;
+
 	if (clock != SND_TSCM_CLOCK_INTERNAL ||
 	    amdtp_stream_pcm_running(&tscm->rx_stream) ||
 	    amdtp_stream_pcm_running(&tscm->tx_stream)) {
author maintainer
#99 lore raw

PATCH 99/129 ALSA: firewire-tascam: check intermediate state of clock status and retry

In reply to Greg Kroah-Hartman

From: Takashi Sakamoto <[email protected]>

commit e1a00b5b253a4f97216b9a33199a863987075162 upstream.

2 bytes in MSB of register for clock status is zero during intermediate state after changing status of sampling clock in models of TASCAM FireWire series. The duration of this state differs depending on cases. During the state, it's better to retry reading the register for current status of the clock.

In current implementation, the intermediate state is checked only when getting current sampling transmission frequency, then retry reading. This care is required for the other operations to read the register.

This commit moves the codes of check and retry into helper function commonly used for operations to read the register.

Fixes e453df44f0d6 ("ALSA: firewire-tascam: add PCM functionality")
Cc <[email protected]> # v4.4+
---
 sound/firewire/tascam/tascam-stream.c |   42 ++++++++++++++++++++++------------
 1 file changed, 28 insertions(+), 14 deletions(-)
sound/firewire/tascam/tascam-stream.c +28 -14
@@ -9,20 +9,37 @@
 #include <linux/delay.h>
 #include "tascam.h"
 
+#define CLOCK_STATUS_MASK      0xffff0000
+#define CLOCK_CONFIG_MASK      0x0000ffff
+
 #define CALLBACK_TIMEOUT 500
 
 static int get_clock(struct snd_tscm *tscm, u32 *data)
 {
+	int trial = 0;
 	__be32 reg;
 	int err;
 
-	err = snd_fw_transaction(tscm->unit, TCODE_READ_QUADLET_REQUEST,
-				 TSCM_ADDR_BASE + TSCM_OFFSET_CLOCK_STATUS,
-				 &reg, sizeof(reg), 0);
-	if (err >= 0)
+	while (trial++ < 5) {
+		err = snd_fw_transaction(tscm->unit, TCODE_READ_QUADLET_REQUEST,
+				TSCM_ADDR_BASE + TSCM_OFFSET_CLOCK_STATUS,
+				&reg, sizeof(reg), 0);
+		if (err < 0)
+			return err;
+
 		*data = be32_to_cpu(reg);
+		if (*data & CLOCK_STATUS_MASK)
+			break;
+
+		// In intermediate state after changing clock status.
+		msleep(50);
+	}
 
-	return err;
+	// Still in the intermediate state.
+	if (trial >= 5)
+		return -EAGAIN;
+
+	return 0;
 }
 
 static int set_clock(struct snd_tscm *tscm, unsigned int rate,
@@ -35,7 +52,7 @@ static int set_clock(struct snd_tscm *ts
 	err = get_clock(tscm, &data);
 	if (err < 0)
 		return err;
-	data &= 0x0000ffff;
+	data &= CLOCK_CONFIG_MASK;
 
 	if (rate > 0) {
 		data &= 0x000000ff;
@@ -80,17 +97,14 @@ static int set_clock(struct snd_tscm *ts
 
 int snd_tscm_stream_get_rate(struct snd_tscm *tscm, unsigned int *rate)
 {
-	u32 data = 0x0;
-	unsigned int trials = 0;
+	u32 data;
 	int err;
 
-	while (data == 0x0 || trials++ < 5) {
-		err = get_clock(tscm, &data);
-		if (err < 0)
-			return err;
+	err = get_clock(tscm, &data);
+	if (err < 0)
+		return err;
 
-		data = (data & 0xff000000) >> 24;
-	}
+	data = (data & 0xff000000) >> 24;
 
 	/* Check base rate. */
 	if ((data & 0x0f) == 0x01)
author maintainer
#100 lore raw

PATCH 100/129 IB/hfi1: Define variables as unsigned long to fix KASAN warning

In reply to Greg Kroah-Hartman

From: Ira Weiny <[email protected]>

commit f8659d68e2bee5b86a1beaf7be42d942e1fc81f4 upstream.

Define the working variables to be unsigned long to be compatible with for_each_set_bit and change types as needed.

While we are at it remove unused variables from a couple of functions.

This was found because of the following KASAN warning:
==================================================================

   BUG: KASAN: stack-out-of-bounds in find_first_bit+0x19/0x70
   Read of size 8 at addr ffff888362d778d0 by task kworker/u308:2/1889

   CPU: 21 PID: 1889 Comm: kworker/u308:2 Tainted: G W         5.3.0-rc2-mm1+ #2
   Hardware name: Intel Corporation W2600CR/W2600CR, BIOS SE5C600.86B.02.04.0003.102320141138 10/23/2014
   Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
   Call Trace:
    dump_stack+0x9a/0xf0
    ? find_first_bit+0x19/0x70
    print_address_description+0x6c/0x332
    ? find_first_bit+0x19/0x70
    ? find_first_bit+0x19/0x70
    __kasan_report.cold.6+0x1a/0x3b
    ? find_first_bit+0x19/0x70
    kasan_report+0xe/0x12
    find_first_bit+0x19/0x70
    pma_get_opa_portstatus+0x5cc/0xa80 [hfi1]
    ? ret_from_fork+0x3a/0x50
    ? pma_get_opa_port_ectrs+0x200/0x200 [hfi1]
    ? stack_trace_consume_entry+0x80/0x80
    hfi1_process_mad+0x39b/0x26c0 [hfi1]
    ? __lock_acquire+0x65e/0x21b0
    ? clear_linkup_counters+0xb0/0xb0 [hfi1]
    ? check_chain_key+0x1d7/0x2e0
    ? lock_downgrade+0x3a0/0x3a0
    ? match_held_lock+0x2e/0x250
    ib_mad_recv_done+0x698/0x15e0 [ib_core]
    ? clear_linkup_counters+0xb0/0xb0 [hfi1]
    ? ib_mad_send_done+0xc80/0xc80 [ib_core]
    ? mark_held_locks+0x79/0xa0
    ? _raw_spin_unlock_irqrestore+0x44/0x60
    ? rvt_poll_cq+0x1e1/0x340 [rdmavt]
    __ib_process_cq+0x97/0x100 [ib_core]
    ib_cq_poll_work+0x31/0xb0 [ib_core]
    process_one_work+0x4ee/0xa00
    ? pwq_dec_nr_in_flight+0x110/0x110
    ? do_raw_spin_lock+0x113/0x1d0
    worker_thread+0x57/0x5a0
    ? process_one_work+0xa00/0xa00
    kthread+0x1bb/0x1e0
    ? kthread_create_on_node+0xc0/0xc0
    ret_from_fork+0x3a/0x50

   The buggy address belongs to the page:
   page:ffffea000d8b5dc0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0
   flags: 0x17ffffc0000000()
   raw: 0017ffffc0000000 0000000000000000 ffffea000d8b5dc8 0000000000000000
   raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
   page dumped because: kasan: bad access detected

addr ffff888362d778d0 is located in stack of task kworker/u308:2/1889 at offset 32 in frame:

    pma_get_opa_portstatus+0x0/0xa80 [hfi1]

this frame has 1 object:

    [32, 36) 'vl_select_mask'
   Memory state around the buggy address:
    ffff888362d77780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    ffff888362d77800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   >ffff888362d77880: 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2 00 00
                                                    ^
    ffff888362d77900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    ffff888362d77980: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2

==================================================================

---
 drivers/infiniband/hw/hfi1/mad.c |   45 ++++++++++++++++-----------------------
 1 file changed, 19 insertions(+), 26 deletions(-)
drivers/infiniband/hw/hfi1/mad.c +19 -26
@@ -2016,7 +2016,7 @@ struct opa_port_status_req {
 	__be32 vl_select_mask;
 };
 
-#define VL_MASK_ALL		0x000080ff
+#define VL_MASK_ALL		0x00000000000080ffUL
 
 struct opa_port_status_rsp {
 	__u8 port_num;
@@ -2315,15 +2315,14 @@ static int pma_get_opa_classportinfo(str
 }
 
 static void a0_portstatus(struct hfi1_pportdata *ppd,
-			  struct opa_port_status_rsp *rsp, u32 vl_select_mask)
+			  struct opa_port_status_rsp *rsp)
 {
 	if (!is_bx(ppd->dd)) {
 		unsigned long vl;
 		u64 sum_vl_xmit_wait = 0;
-		u32 vl_all_mask = VL_MASK_ALL;
+		unsigned long vl_all_mask = VL_MASK_ALL;
 
-		for_each_set_bit(vl, (unsigned long *)&(vl_all_mask),
-				 8 * sizeof(vl_all_mask)) {
+		for_each_set_bit(vl, &vl_all_mask, BITS_PER_LONG) {
 			u64 tmp = sum_vl_xmit_wait +
 				  read_port_cntr(ppd, C_TX_WAIT_VL,
 						 idx_from_vl(vl));
@@ -2347,12 +2346,12 @@ static int pma_get_opa_portstatus(struct
 		(struct opa_port_status_req *)pmp->data;
 	struct hfi1_devdata *dd = dd_from_ibdev(ibdev);
 	struct opa_port_status_rsp *rsp;
-	u32 vl_select_mask = be32_to_cpu(req->vl_select_mask);
+	unsigned long vl_select_mask = be32_to_cpu(req->vl_select_mask);
 	unsigned long vl;
 	size_t response_data_size;
 	u32 nports = be32_to_cpu(pmp->mad_hdr.attr_mod) >> 24;
 	u8 port_num = req->port_num;
-	u8 num_vls = hweight32(vl_select_mask);
+	u8 num_vls = hweight64(vl_select_mask);
 	struct _vls_pctrs *vlinfo;
 	struct hfi1_ibport *ibp = to_iport(ibdev, port);
 	struct hfi1_pportdata *ppd = ppd_from_ibp(ibp);
@@ -2386,7 +2385,7 @@ static int pma_get_opa_portstatus(struct
 
 	hfi1_read_link_quality(dd, &rsp->link_quality_indicator);
 
-	rsp->vl_select_mask = cpu_to_be32(vl_select_mask);
+	rsp->vl_select_mask = cpu_to_be32((u32)vl_select_mask);
 	rsp->port_xmit_data = cpu_to_be64(read_dev_cntr(dd, C_DC_XMIT_FLITS,
 					  CNTR_INVALID_VL));
 	rsp->port_rcv_data = cpu_to_be64(read_dev_cntr(dd, C_DC_RCV_FLITS,
@@ -2449,8 +2448,7 @@ static int pma_get_opa_portstatus(struct
 	 * So in the for_each_set_bit() loop below, we don't need
 	 * any additional checks for vl.
 	 */
-	for_each_set_bit(vl, (unsigned long *)&(vl_select_mask),
-			 8 * sizeof(vl_select_mask)) {
+	for_each_set_bit(vl, &vl_select_mask, BITS_PER_LONG) {
 		memset(vlinfo, 0, sizeof(*vlinfo));
 
 		tmp = read_dev_cntr(dd, C_DC_RX_FLIT_VL, idx_from_vl(vl));
@@ -2487,7 +2485,7 @@ static int pma_get_opa_portstatus(struct
 		vfi++;
 	}
 
-	a0_portstatus(ppd, rsp, vl_select_mask);
+	a0_portstatus(ppd, rsp);
 
 	if (resp_len)
 		*resp_len += response_data_size;
@@ -2534,16 +2532,14 @@ static u64 get_error_counter_summary(str
 	return error_counter_summary;
 }
 
-static void a0_datacounters(struct hfi1_pportdata *ppd, struct _port_dctrs *rsp,
-			    u32 vl_select_mask)
+static void a0_datacounters(struct hfi1_pportdata *ppd, struct _port_dctrs *rsp)
 {
 	if (!is_bx(ppd->dd)) {
 		unsigned long vl;
 		u64 sum_vl_xmit_wait = 0;
-		u32 vl_all_mask = VL_MASK_ALL;
+		unsigned long vl_all_mask = VL_MASK_ALL;
 
-		for_each_set_bit(vl, (unsigned long *)&(vl_all_mask),
-				 8 * sizeof(vl_all_mask)) {
+		for_each_set_bit(vl, &vl_all_mask, BITS_PER_LONG) {
 			u64 tmp = sum_vl_xmit_wait +
 				  read_port_cntr(ppd, C_TX_WAIT_VL,
 						 idx_from_vl(vl));
@@ -2599,7 +2595,7 @@ static int pma_get_opa_datacounters(stru
 	u64 port_mask;
 	u8 port_num;
 	unsigned long vl;
-	u32 vl_select_mask;
+	unsigned long vl_select_mask;
 	int vfi;
 
 	num_ports = be32_to_cpu(pmp->mad_hdr.attr_mod) >> 24;
@@ -2668,8 +2664,7 @@ static int pma_get_opa_datacounters(stru
 	 * So in the for_each_set_bit() loop below, we don't need
 	 * any additional checks for vl.
 	 */
-	for_each_set_bit(vl, (unsigned long *)&(vl_select_mask),
-			 8 * sizeof(req->vl_select_mask)) {
+	for_each_set_bit(vl, &vl_select_mask, BITS_PER_LONG) {
 		memset(vlinfo, 0, sizeof(*vlinfo));
 
 		rsp->vls[vfi].port_vl_xmit_data =
@@ -2712,7 +2707,7 @@ static int pma_get_opa_datacounters(stru
 		vfi++;
 	}
 
-	a0_datacounters(ppd, rsp, vl_select_mask);
+	a0_datacounters(ppd, rsp);
 
 	if (resp_len)
 		*resp_len += response_data_size;
@@ -2807,7 +2802,7 @@ static int pma_get_opa_porterrors(struct
 	struct _vls_ectrs *vlinfo;
 	unsigned long vl;
 	u64 port_mask, tmp;
-	u32 vl_select_mask;
+	unsigned long vl_select_mask;
 	int vfi;
 
 	req = (struct opa_port_error_counters64_msg *)pmp->data;
@@ -2866,8 +2861,7 @@ static int pma_get_opa_porterrors(struct
 	vlinfo = &rsp->vls[0];
 	vfi = 0;
 	vl_select_mask = be32_to_cpu(req->vl_select_mask);
-	for_each_set_bit(vl, (unsigned long *)&(vl_select_mask),
-			 8 * sizeof(req->vl_select_mask)) {
+	for_each_set_bit(vl, &vl_select_mask, BITS_PER_LONG) {
 		memset(vlinfo, 0, sizeof(*vlinfo));
 		rsp->vls[vfi].port_vl_xmit_discards =
 			cpu_to_be64(read_port_cntr(ppd, C_SW_XMIT_DSCD_VL,
@@ -3077,7 +3071,7 @@ static int pma_set_opa_portstatus(struct
 	u32 nports = be32_to_cpu(pmp->mad_hdr.attr_mod) >> 24;
 	u64 portn = be64_to_cpu(req->port_select_mask[3]);
 	u32 counter_select = be32_to_cpu(req->counter_select_mask);
-	u32 vl_select_mask = VL_MASK_ALL; /* clear all per-vl cnts */
+	unsigned long vl_select_mask = VL_MASK_ALL; /* clear all per-vl cnts */
 	unsigned long vl;
 
 	if ((nports != 1) || (portn != 1 << port)) {
@@ -3169,8 +3163,7 @@ static int pma_set_opa_portstatus(struct
 	if (counter_select & CS_UNCORRECTABLE_ERRORS)
 		write_dev_cntr(dd, C_DC_UNC_ERR, CNTR_INVALID_VL, 0);
 
-	for_each_set_bit(vl, (unsigned long *)&(vl_select_mask),
-			 8 * sizeof(vl_select_mask)) {
+	for_each_set_bit(vl, &vl_select_mask, BITS_PER_LONG) {
 		if (counter_select & CS_PORT_XMIT_DATA)
 			write_port_cntr(ppd, C_TX_FLIT_VL, idx_from_vl(vl), 0);
 
author maintainer
#101 lore raw

PATCH 101/129 printk: remove games with previous record flags

In reply to Greg Kroah-Hartman

From: Linus Torvalds <[email protected]>

[ Upstream commit 5aa068ea4082b39eafc356c27c9ecd155b0895f6 ]

The record logging code looks at the previous record flags in various ways, and they are all wrong.

You can't use the previous record flags to determine anything about the next record, because they may simply not be related. In particular, the reason the previous record was a continuation record may well be exactly _because_ the new record was printed by a different process, which is why the previous record was flushed.

So all those games are simply wrong, and make the code hard to understand (because the code fundamentally cdoes not make sense).

So remove it.

---
 kernel/printk/printk.c | 109 +++++++++--------------------------------
 1 file changed, 24 insertions(+), 85 deletions(-)
kernel/printk/printk.c +24 -85
index 27adaaab96ba5..df348d4eeb265 100644
@@ -356,7 +356,6 @@ DECLARE_WAIT_QUEUE_HEAD(log_wait);
 /* the next printk record to read by syslog(READ) or /proc/kmsg */
 static u64 syslog_seq;
 static u32 syslog_idx;
-static enum log_flags syslog_prev;
 static size_t syslog_partial;
 
 /* index and sequence number of the first record stored in the buffer */
@@ -370,7 +369,6 @@ static u32 log_next_idx;
 /* the next printk record to write to the console */
 static u64 console_seq;
 static u32 console_idx;
-static enum log_flags console_prev;
 
 /* the next printk record to read after the last 'clear' command */
 static u64 clear_seq;
@@ -639,27 +637,15 @@ static void append_char(char **pp, char *e, char c)
 }
 
 static ssize_t msg_print_ext_header(char *buf, size_t size,
-				    struct printk_log *msg, u64 seq,
-				    enum log_flags prev_flags)
+				    struct printk_log *msg, u64 seq)
 {
 	u64 ts_usec = msg->ts_nsec;
-	char cont = '-';
 
 	do_div(ts_usec, 1000);
 
-	/*
-	 * If we couldn't merge continuation line fragments during the print,
-	 * export the stored flags to allow an optional external merge of the
-	 * records. Merging the records isn't always neccessarily correct, like
-	 * when we hit a race during printing. In most cases though, it produces
-	 * better readable output. 'c' in the record flags mark the first
-	 * fragment of a line, '+' the following.
-	 */
-	if (msg->flags & LOG_CONT)
-		cont = (prev_flags & LOG_CONT) ? '+' : 'c';
-
 	return scnprintf(buf, size, "%u,%llu,%llu,%c;",
-		       (msg->facility << 3) | msg->level, seq, ts_usec, cont);
+		       (msg->facility << 3) | msg->level, seq, ts_usec,
+		       msg->flags & LOG_CONT ? 'c' : '-');
 }
 
 static ssize_t msg_print_ext_body(char *buf, size_t size,
@@ -714,7 +700,6 @@ static ssize_t msg_print_ext_body(char *buf, size_t size,
 struct devkmsg_user {
 	u64 seq;
 	u32 idx;
-	enum log_flags prev;
 	struct ratelimit_state rs;
 	struct mutex lock;
 	char buf[CONSOLE_EXT_LOG_MAX];
@@ -824,12 +809,11 @@ static ssize_t devkmsg_read(struct file *file, char __user *buf,
 
 	msg = log_from_idx(user->idx);
 	len = msg_print_ext_header(user->buf, sizeof(user->buf),
-				   msg, user->seq, user->prev);
+				   msg, user->seq);
 	len += msg_print_ext_body(user->buf + len, sizeof(user->buf) - len,
 				  log_dict(msg), msg->dict_len,
 				  log_text(msg), msg->text_len);
 
-	user->prev = msg->flags;
 	user->idx = log_next(user->idx);
 	user->seq++;
 	raw_spin_unlock_irq(&logbuf_lock);
@@ -1215,26 +1199,12 @@ static size_t print_prefix(const struct printk_log *msg, bool syslog, char *buf)
 	return len;
 }
 
-static size_t msg_print_text(const struct printk_log *msg, enum log_flags prev,
-			     bool syslog, char *buf, size_t size)
+static size_t msg_print_text(const struct printk_log *msg, bool syslog, char *buf, size_t size)
 {
 	const char *text = log_text(msg);
 	size_t text_size = msg->text_len;
-	bool prefix = true;
-	bool newline = true;
 	size_t len = 0;
 
-	if ((prev & LOG_CONT) && !(msg->flags & LOG_PREFIX))
-		prefix = false;
-
-	if (msg->flags & LOG_CONT) {
-		if ((prev & LOG_CONT) && !(prev & LOG_NEWLINE))
-			prefix = false;
-
-		if (!(msg->flags & LOG_NEWLINE))
-			newline = false;
-	}
-
 	do {
 		const char *next = memchr(text, '\n', text_size);
 		size_t text_len;
@@ -1252,22 +1222,17 @@ static size_t msg_print_text(const struct printk_log *msg, enum log_flags prev,
 			    text_len + 1 >= size - len)
 				break;
 
-			if (prefix)
-				len += print_prefix(msg, syslog, buf + len);
+			len += print_prefix(msg, syslog, buf + len);
 			memcpy(buf + len, text, text_len);
 			len += text_len;
-			if (next || newline)
-				buf[len++] = '\n';
+			buf[len++] = '\n';
 		} else {
 			/* SYSLOG_ACTION_* buffer size only calculation */
-			if (prefix)
-				len += print_prefix(msg, syslog, NULL);
+			len += print_prefix(msg, syslog, NULL);
 			len += text_len;
-			if (next || newline)
-				len++;
+			len++;
 		}
 
-		prefix = true;
 		text = next;
 	} while (text);
 
@@ -1293,7 +1258,6 @@ static int syslog_print(char __user *buf, int size)
 			/* messages are gone, move to first one */
 			syslog_seq = log_first_seq;
 			syslog_idx = log_first_idx;
-			syslog_prev = 0;
 			syslog_partial = 0;
 		}
 		if (syslog_seq == log_next_seq) {
@@ -1303,13 +1267,11 @@ static int syslog_print(char __user *buf, int size)
 
 		skip = syslog_partial;
 		msg = log_from_idx(syslog_idx);
-		n = msg_print_text(msg, syslog_prev, true, text,
-				   LOG_LINE_MAX + PREFIX_MAX);
+		n = msg_print_text(msg, true, text, LOG_LINE_MAX + PREFIX_MAX);
 		if (n - syslog_partial <= size) {
 			/* message fits into buffer, move forward */
 			syslog_idx = log_next(syslog_idx);
 			syslog_seq++;
-			syslog_prev = msg->flags;
 			n -= syslog_partial;
 			syslog_partial = 0;
 		} else if (!len){
@@ -1352,7 +1314,6 @@ static int syslog_print_all(char __user *buf, int size, bool clear)
 		u64 next_seq;
 		u64 seq;
 		u32 idx;
-		enum log_flags prev;
 
 		/*
 		 * Find first record that fits, including all following records,
@@ -1360,12 +1321,10 @@ static int syslog_print_all(char __user *buf, int size, bool clear)
 		 */
 		seq = clear_seq;
 		idx = clear_idx;
-		prev = 0;
 		while (seq < log_next_seq) {
 			struct printk_log *msg = log_from_idx(idx);
 
-			len += msg_print_text(msg, prev, true, NULL, 0);
-			prev = msg->flags;
+			len += msg_print_text(msg, true, NULL, 0);
 			idx = log_next(idx);
 			seq++;
 		}
@@ -1373,12 +1332,10 @@ static int syslog_print_all(char __user *buf, int size, bool clear)
 		/* move first record forward until length fits into the buffer */
 		seq = clear_seq;
 		idx = clear_idx;
-		prev = 0;
 		while (len > size && seq < log_next_seq) {
 			struct printk_log *msg = log_from_idx(idx);
 
-			len -= msg_print_text(msg, prev, true, NULL, 0);
-			prev = msg->flags;
+			len -= msg_print_text(msg, true, NULL, 0);
 			idx = log_next(idx);
 			seq++;
 		}
@@ -1391,7 +1348,7 @@ static int syslog_print_all(char __user *buf, int size, bool clear)
 			struct printk_log *msg = log_from_idx(idx);
 			int textlen;
 
-			textlen = msg_print_text(msg, prev, true, text,
+			textlen = msg_print_text(msg, true, text,
 						 LOG_LINE_MAX + PREFIX_MAX);
 			if (textlen < 0) {
 				len = textlen;
@@ -1399,7 +1356,6 @@ static int syslog_print_all(char __user *buf, int size, bool clear)
 			}
 			idx = log_next(idx);
 			seq++;
-			prev = msg->flags;
 
 			raw_spin_unlock_irq(&logbuf_lock);
 			if (copy_to_user(buf + len, text, textlen))
@@ -1412,7 +1368,6 @@ static int syslog_print_all(char __user *buf, int size, bool clear)
 				/* messages are gone, move to next one */
 				seq = log_first_seq;
 				idx = log_first_idx;
-				prev = 0;
 			}
 		}
 	}
@@ -1513,7 +1468,6 @@ int do_syslog(int type, char __user *buf, int len, int source)
 			/* messages are gone, move to first one */
 			syslog_seq = log_first_seq;
 			syslog_idx = log_first_idx;
-			syslog_prev = 0;
 			syslog_partial = 0;
 		}
 		if (source == SYSLOG_FROM_PROC) {
@@ -1526,16 +1480,14 @@ int do_syslog(int type, char __user *buf, int len, int source)
 		} else {
 			u64 seq = syslog_seq;
 			u32 idx = syslog_idx;
-			enum log_flags prev = syslog_prev;
 
 			error = 0;
 			while (seq < log_next_seq) {
 				struct printk_log *msg = log_from_idx(idx);
 
-				error += msg_print_text(msg, prev, true, NULL, 0);
+				error += msg_print_text(msg, true, NULL, 0);
 				idx = log_next(idx);
 				seq++;
-				prev = msg->flags;
 			}
 			error -= syslog_partial;
 		}
@@ -1717,7 +1669,7 @@ static size_t cont_print_text(char *text, size_t size)
 	size_t textlen = 0;
 	size_t len;
 
-	if (cont.cons == 0 && (console_prev & LOG_NEWLINE)) {
+	if (cont.cons == 0) {
 		textlen += print_time(cont.ts_nsec, text);
 		size -= textlen;
 	}
@@ -1985,11 +1937,9 @@ static u64 syslog_seq;
 static u32 syslog_idx;
 static u64 console_seq;
 static u32 console_idx;
-static enum log_flags syslog_prev;
 static u64 log_first_seq;
 static u32 log_first_idx;
 static u64 log_next_seq;
-static enum log_flags console_prev;
 static struct cont {
 	size_t len;
 	size_t cons;
@@ -2001,15 +1951,15 @@ static char *log_dict(const struct printk_log *msg) { return NULL; }
 static struct printk_log *log_from_idx(u32 idx) { return NULL; }
 static u32 log_next(u32 idx) { return 0; }
 static ssize_t msg_print_ext_header(char *buf, size_t size,
-				    struct printk_log *msg, u64 seq,
-				    enum log_flags prev_flags) { return 0; }
+				    struct printk_log *msg,
+				    u64 seq) { return 0; }
 static ssize_t msg_print_ext_body(char *buf, size_t size,
 				  char *dict, size_t dict_len,
 				  char *text, size_t text_len) { return 0; }
 static void call_console_drivers(int level,
 				 const char *ext_text, size_t ext_len,
 				 const char *text, size_t len) {}
-static size_t msg_print_text(const struct printk_log *msg, enum log_flags prev,
+static size_t msg_print_text(const struct printk_log *msg,
 			     bool syslog, char *buf, size_t size) { return 0; }
 static size_t cont_print_text(char *text, size_t size) { return 0; }
 static bool suppress_message_printing(int level) { return false; }
@@ -2397,7 +2347,6 @@ void console_unlock(void)
 			/* messages are gone, move to first one */
 			console_seq = log_first_seq;
 			console_idx = log_first_idx;
-			console_prev = 0;
 		} else {
 			len = 0;
 		}
@@ -2422,16 +2371,14 @@ void console_unlock(void)
 			 * will properly dump everything later.
 			 */
 			msg->flags &= ~LOG_NOCONS;
-			console_prev = msg->flags;
 			goto skip;
 		}
 
-		len += msg_print_text(msg, console_prev, false,
-				      text + len, sizeof(text) - len);
+		len += msg_print_text(msg, false, text + len, sizeof(text) - len);
 		if (nr_ext_console_drivers) {
 			ext_len = msg_print_ext_header(ext_text,
 						sizeof(ext_text),
-						msg, console_seq, console_prev);
+						msg, console_seq);
 			ext_len += msg_print_ext_body(ext_text + ext_len,
 						sizeof(ext_text) - ext_len,
 						log_dict(msg), msg->dict_len,
@@ -2439,7 +2386,6 @@ void console_unlock(void)
 		}
 		console_idx = log_next(console_idx);
 		console_seq++;
-		console_prev = msg->flags;
 		raw_spin_unlock(&logbuf_lock);
 
 		stop_critical_timings();	/* don't trace print latency */
@@ -2734,7 +2680,6 @@ void register_console(struct console *newcon)
 		raw_spin_lock_irqsave(&logbuf_lock, flags);
 		console_seq = syslog_seq;
 		console_idx = syslog_idx;
-		console_prev = syslog_prev;
 		raw_spin_unlock_irqrestore(&logbuf_lock, flags);
 		/*
 		 * We're about to replay the log buffer.  Only do this to the
@@ -3084,7 +3029,7 @@ bool kmsg_dump_get_line_nolock(struct kmsg_dumper *dumper, bool syslog,
 		goto out;
 
 	msg = log_from_idx(dumper->cur_idx);
-	l = msg_print_text(msg, 0, syslog, line, size);
+	l = msg_print_text(msg, syslog, line, size);
 
 	dumper->cur_idx = log_next(dumper->cur_idx);
 	dumper->cur_seq++;
@@ -3153,7 +3098,6 @@ bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
 	u32 idx;
 	u64 next_seq;
 	u32 next_idx;
-	enum log_flags prev;
 	size_t l = 0;
 	bool ret = false;
 
@@ -3176,27 +3120,23 @@ bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
 	/* calculate length of entire buffer */
 	seq = dumper->cur_seq;
 	idx = dumper->cur_idx;
-	prev = 0;
 	while (seq < dumper->next_seq) {
 		struct printk_log *msg = log_from_idx(idx);
 
-		l += msg_print_text(msg, prev, true, NULL, 0);
+		l += msg_print_text(msg, true, NULL, 0);
 		idx = log_next(idx);
 		seq++;
-		prev = msg->flags;
 	}
 
 	/* move first record forward until length fits into the buffer */
 	seq = dumper->cur_seq;
 	idx = dumper->cur_idx;
-	prev = 0;
 	while (l > size && seq < dumper->next_seq) {
 		struct printk_log *msg = log_from_idx(idx);
 
-		l -= msg_print_text(msg, prev, true, NULL, 0);
+		l -= msg_print_text(msg, true, NULL, 0);
 		idx = log_next(idx);
 		seq++;
-		prev = msg->flags;
 	}
 
 	/* last message in next interation */
@@ -3207,10 +3147,9 @@ bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
 	while (seq < dumper->next_seq) {
 		struct printk_log *msg = log_from_idx(idx);
 
-		l += msg_print_text(msg, prev, syslog, buf + l, size - l);
+		l += msg_print_text(msg, syslog, buf + l, size - l);
 		idx = log_next(idx);
 		seq++;
-		prev = msg->flags;
 	}
 
 	dumper->next_seq = next_seq;
Signature · 1 line
2.20.1
author maintainer
#102 lore raw

PATCH 102/129 printk: Do not lose last line in kmsg buffer dump

In reply to Greg Kroah-Hartman

From: Vincent Whitchurch <[email protected]>

[ Upstream commit b46eff55ad5bd98e746c0a7022fe7ee071de5fee ]

kmsg_dump_get_buffer() is supposed to select all the youngest log messages which fit into the provided buffer. It determines the correct start index by using msg_print_text() with a NULL buffer to calculate the size of each entry. However, when performing the actual writes, msg_print_text() only writes the entry to the buffer if the written len is lesser than the size of the buffer. So if the lengths of the selected youngest log messages happen to precisely fill up the provided buffer, the last log message is not included.

We don't want to modify msg_print_text() to fill up the buffer and start returning a length which is equal to the size of the buffer, since callers of its other users, such as kmsg_dump_get_line(), depend upon the current behaviour.

Instead, fix kmsg_dump_get_buffer() to compensate for this.

For example, with the following two final prints:

[    6.427502] AAAAAAAAAAAAA
[    6.427769] BBBBBBBB12345

A dump of a 64-byte buffer filled by kmsg_dump_get_buffer(), before this patch:

 00000000: 3c 30 3e 5b 20 20 20 20 36 2e 35 32 32 31 39 37  <0>[    6.522197
 00000010: 5d 20 41 41 41 41 41 41 41 41 41 41 41 41 41 0a  ] AAAAAAAAAAAAA.
 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................

After this patch:

 00000000: 3c 30 3e 5b 20 20 20 20 36 2e 34 35 36 36 37 38  <0>[    6.456678
 00000010: 5d 20 42 42 42 42 42 42 42 42 31 32 33 34 35 0a  ] BBBBBBBB12345.
 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Fixes e2ae715d66bf4bec ("kmsg - kmsg_dump() use iterator to receive log buffer content")

To: [email protected]

---
 kernel/printk/printk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/printk/printk.c +1 -1
index df348d4eeb265..6607d77afe55a 100644
@@ -3131,7 +3131,7 @@ bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
 	/* move first record forward until length fits into the buffer */
 	seq = dumper->cur_seq;
 	idx = dumper->cur_idx;
-	while (l > size && seq < dumper->next_seq) {
+	while (l >= size && seq < dumper->next_seq) {
 		struct printk_log *msg = log_from_idx(idx);
 
 		l -= msg_print_text(msg, true, NULL, 0);
Signature · 1 line
2.20.1
author maintainer
#103 lore raw

PATCH 103/129 fuse: fix missing unlock_page in fuse_writepage()

In reply to Greg Kroah-Hartman

From: Vasily Averin <[email protected]>

commit d5880c7a8620290a6c90ced7a0e8bd0ad9419601 upstream.

unlock_page() was missing in case of an already in-flight write against the same page.

Fixes ff17be086477 ("fuse: writepage: skip already in flight")
Cc <[email protected]> # v3.13
---
 fs/fuse/file.c |    1 +
 1 file changed, 1 insertion(+)
fs/fuse/file.c +1 -0
@@ -1694,6 +1694,7 @@ static int fuse_writepage(struct page *p
 		WARN_ON(wbc->sync_mode == WB_SYNC_ALL);
 
 		redirty_page_for_writepage(wbc, page);
+		unlock_page(page);
 		return 0;
 	}
 
author maintainer
#104 lore raw

PATCH 104/129 parisc: Disable HP HSC-PCI Cards to prevent kernel crash

In reply to Greg Kroah-Hartman

From: Helge Deller <[email protected]>

commit 5fa1659105fac63e0f3c199b476025c2e04111ce upstream.

The HP Dino PCI controller chip can be used in two variants: as on-board controller (e.g. in B160L), or on an Add-On card ("Card-Mode") to bridge PCI components to systems without a PCI bus, e.g. to a HSC/GSC bus. One such Add-On card is the HP HSC-PCI Card which has one or more DEC Tulip PCI NIC chips connected to the on-card Dino PCI controller.

Dino in Card-Mode has a big disadvantage: All PCI memory accesses need to go through the DINO_MEM_DATA register, so Linux drivers will not be able to use the ioremap() function. Without ioremap() many drivers will not work, one example is the tulip driver which then simply crashes the kernel if it tries to access the ports on the HP HSC card.

This patch disables the HP HSC card if it finds one, and as such fixes the kernel crash on a HP D350/2 machine.

---
 drivers/parisc/dino.c |   24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
drivers/parisc/dino.c +24 -0
@@ -160,6 +160,15 @@ struct dino_device
 	(struct dino_device *)__pdata; })
 
 
+/* Check if PCI device is behind a Card-mode Dino. */
+static int pci_dev_is_behind_card_dino(struct pci_dev *dev)
+{
+	struct dino_device *dino_dev;
+
+	dino_dev = DINO_DEV(parisc_walk_tree(dev->bus->bridge));
+	return is_card_dino(&dino_dev->hba.dev->id);
+}
+
 /*
  * Dino Configuration Space Accessor Functions
  */
@@ -442,6 +451,21 @@ static void quirk_cirrus_cardbus(struct
 }
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_6832, quirk_cirrus_cardbus );
 
+#ifdef CONFIG_TULIP
+static void pci_fixup_tulip(struct pci_dev *dev)
+{
+	if (!pci_dev_is_behind_card_dino(dev))
+		return;
+	if (!(pci_resource_flags(dev, 1) & IORESOURCE_MEM))
+		return;
+	pr_warn("%s: HP HSC-PCI Cards with card-mode Dino not yet supported.\n",
+		pci_name(dev));
+	/* Disable this card by zeroing the PCI resources */
+	memset(&dev->resource[0], 0, sizeof(dev->resource[0]));
+	memset(&dev->resource[1], 0, sizeof(dev->resource[1]));
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_DEC, PCI_ANY_ID, pci_fixup_tulip);
+#endif /* CONFIG_TULIP */
 
 static void __init
 dino_bios_init(void)
author maintainer
#105 lore raw

PATCH 105/129 KVM: x86: always stop emulation on page fault

In reply to Greg Kroah-Hartman

From: Jan Dakinevich <[email protected]>

commit 8530a79c5a9f4e29e6ffb35ec1a79d81f4968ec8 upstream.

inject_emulated_exception() returns true if and only if nested page fault happens. However, page fault can come from guest page tables walk, either nested or not nested. In both cases we should stop an attempt to read under RIP and give guest to step over its own page fault handler.

This is also visible when an emulated instruction causes a #GP fault and the VMware backdoor is enabled. To handle the VMware backdoor, KVM intercepts #GP faults; with only the next patch applied, x86_emulate_instruction() injects a #GP but returns EMULATE_FAIL
instead of EMULATE_DONE. EMULATE_FAIL causes handle_exception_nmi()
(or gp_interception() for SVM) to re-inject the original #GP because it thinks emulation failed due to a non-VMware opcode. This patch prevents the issue as x86_emulate_instruction() will return EMULATE_DONE after injecting the #GP.

Fixes 6ea6e84309ca ("KVM: x86: inject exceptions produced by x86_decode_insn")
Cc Denis Lunev <[email protected]>
Cc Roman Kagan <[email protected]>
Cc Denis Plotnikov <[email protected]>
---
 arch/x86/kvm/x86.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
arch/x86/kvm/x86.c +3 -1
@@ -5764,8 +5764,10 @@ int x86_emulate_instruction(struct kvm_v
 			if (reexecute_instruction(vcpu, cr2, write_fault_to_spt,
 						emulation_type))
 				return EMULATE_DONE;
-			if (ctxt->have_exception && inject_emulated_exception(vcpu))
+			if (ctxt->have_exception) {
+				inject_emulated_exception(vcpu);
 				return EMULATE_DONE;
+			}
 			if (emulation_type & EMULTYPE_SKIP)
 				return EMULATE_FAIL;
 			return handle_emulation_failure(vcpu);
author maintainer
#106 lore raw

PATCH 106/129 KVM: x86: set ctxt->have_exception in x86_decode_insn()

In reply to Greg Kroah-Hartman

From: Jan Dakinevich <[email protected]>

commit c8848cee74ff05638e913582a476bde879c968ad upstream.

x86_emulate_instruction() takes into account ctxt->have_exception flag during instruction decoding, but in practice this flag is never set in x86_decode_insn().

Fixes 6ea6e84309ca ("KVM: x86: inject exceptions produced by x86_decode_insn")
Cc Denis Lunev <[email protected]>
Cc Roman Kagan <[email protected]>
Cc Denis Plotnikov <[email protected]>
---
 arch/x86/kvm/emulate.c |    2 ++
 arch/x86/kvm/x86.c     |    6 ++++++
 2 files changed, 8 insertions(+)
arch/x86/kvm/emulate.c +2 -0
@@ -5257,6 +5257,8 @@ done_prefixes:
 					ctxt->memopp->addr.mem.ea + ctxt->_eip);
 
 done:
+	if (rc == X86EMUL_PROPAGATE_FAULT)
+		ctxt->have_exception = true;
 	return (rc != X86EMUL_CONTINUE) ? EMULATION_FAILED : EMULATION_OK;
 }
 
arch/x86/kvm/x86.c +6 -0
@@ -5765,6 +5765,12 @@ int x86_emulate_instruction(struct kvm_v
 						emulation_type))
 				return EMULATE_DONE;
 			if (ctxt->have_exception) {
+				/*
+				 * #UD should result in just EMULATION_FAILED, and trap-like
+				 * exception should not be encountered during decode.
+				 */
+				WARN_ON_ONCE(ctxt->exception.vector == UD_VECTOR ||
+					     exception_type(ctxt->exception.vector) == EXCPT_TRAP);
 				inject_emulated_exception(vcpu);
 				return EMULATE_DONE;
 			}
author maintainer
#107 lore raw

PATCH 107/129 KVM: x86: Manually calculate reserved bits when loading PDPTRS

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

commit 16cfacc8085782dab8e365979356ce1ca87fd6cc upstream.

Manually generate the PDPTR reserved bit mask when explicitly loading PDPTRs. The reserved bits that are being tracked by the MMU reflect the current paging mode, which is unlikely to be PAE paging in the vast majority of flows that use load_pdptrs(), e.g. CR0 and CR4 emulation, __set_sregs(), etc... This can cause KVM to incorrectly signal a bad PDPTR, or more likely, miss a reserved bit check and subsequently fail a VM-Enter due to a bad VMCS.GUEST_PDPTR.

Add a one off helper to generate the reserved bits instead of sharing code across the MMU's calculations and the PDPTR emulation. The PDPTR reserved bits are basically set in stone, and pushing a helper into the MMU's calculation adds unnecessary complexity without improving readability.

Oppurtunistically fix/update the comment for load_pdptrs().

Note, the buggy commit also introduced a deliberate functional change, "Also remove bit 5-6 from rsvd_bits_mask per latest SDM.", which was effectively (and correctly) reverted by commit cd9ae5fe47df ("KVM: x86:
Fix page-tables reserved bits"). A bit of SDM archaeology shows that the SDM from late 2008 had a bug (likely a copy+paste error) where it listed bits 6:5 as AVL and A for PDPTEs used for 4k entries but reserved for 2mb entries. I.e. the SDM contradicted itself, and bits 6:5 are and always have been reserved.

Fixes 20c466b56168d ("KVM: Use rsvd_bits_mask in load_pdptrs()")
Cc Nadav Amit <[email protected]>
---
 arch/x86/kvm/x86.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
arch/x86/kvm/x86.c +8 -3
@@ -535,8 +535,14 @@ static int kvm_read_nested_guest_page(st
 				       data, offset, len, access);
 }
 
+static inline u64 pdptr_rsvd_bits(struct kvm_vcpu *vcpu)
+{
+	return rsvd_bits(cpuid_maxphyaddr(vcpu), 63) | rsvd_bits(5, 8) |
+	       rsvd_bits(1, 2);
+}
+
 /*
- * Load the pae pdptrs.  Return true is they are all valid.
+ * Load the pae pdptrs.  Return 1 if they are all valid, 0 otherwise.
  */
 int load_pdptrs(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu, unsigned long cr3)
 {
@@ -555,8 +561,7 @@ int load_pdptrs(struct kvm_vcpu *vcpu, s
 	}
 	for (i = 0; i < ARRAY_SIZE(pdpte); ++i) {
 		if ((pdpte[i] & PT_PRESENT_MASK) &&
-		    (pdpte[i] &
-		     vcpu->arch.mmu.guest_rsvd_check.rsvd_bits_mask[0][2])) {
+		    (pdpte[i] & pdptr_rsvd_bits(vcpu))) {
 			ret = 0;
 			goto out;
 		}
author maintainer
#108 lore raw

PATCH 108/129 media: sn9c20x: Add MSI MS-1039 laptop to flip_dmi_table

In reply to Greg Kroah-Hartman

From: Hans de Goede <[email protected]>

commit 7e0bb5828311f811309bed5749528ca04992af2f upstream.

Like a bunch of other MSI laptops the MS-1039 uses a 0c45:627b SN9C201 + OV7660 webcam which is mounted upside down.

Add it to the sn9c20x flip_dmi_table to deal with this.

---
 drivers/media/usb/gspca/sn9c20x.c |    7 +++++++
 1 file changed, 7 insertions(+)
drivers/media/usb/gspca/sn9c20x.c +7 -0
@@ -138,6 +138,13 @@ static const struct dmi_system_id flip_d
 		}
 	},
 	{
+		.ident = "MSI MS-1039",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MICRO-STAR INT'L CO.,LTD."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MS-1039"),
+		}
+	},
+	{
 		.ident = "MSI MS-1632",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "MSI"),
author maintainer
#109 lore raw

PATCH 109/129 ASoC: Intel: NHLT: Fix debug print format

In reply to Greg Kroah-Hartman

From: Amadeusz Sławiński <[email protected]>

commit 855a06da37a773fd073d51023ac9d07988c87da8 upstream.

oem_table_id is 8 chars long, so we need to limit it, otherwise it may print some unprintable characters into dmesg.

---
 sound/soc/intel/skylake/skl-nhlt.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/intel/skylake/skl-nhlt.c +1 -1
@@ -211,7 +211,7 @@ int skl_nhlt_update_topology_bin(struct
 	struct hdac_bus *bus = ebus_to_hbus(&skl->ebus);
 	struct device *dev = bus->dev;
 
-	dev_dbg(dev, "oem_id %.6s, oem_table_id %8s oem_revision %d\n",
+	dev_dbg(dev, "oem_id %.6s, oem_table_id %.8s oem_revision %d\n",
 		nhlt->header.oem_id, nhlt->header.oem_table_id,
 		nhlt->header.oem_revision);
 
author maintainer
#110 lore raw

PATCH 110/129 ASoC: Intel: Fix use of potentially uninitialized variable

In reply to Greg Kroah-Hartman

From: Amadeusz Sławiński <[email protected]>

commit 810f3b860850148788fc1ed8a6f5f807199fed65 upstream.

If ipc->ops.reply_msg_match is NULL, we may end up using uninitialized mask value.

reported by smatch:
sound/soc/intel/common/sst-ipc.c:266 sst_ipc_reply_find_msg() error: uninitialized symbol 'mask'.

---
 sound/soc/intel/common/sst-ipc.c |    2 ++
 1 file changed, 2 insertions(+)
sound/soc/intel/common/sst-ipc.c +2 -0
@@ -211,6 +211,8 @@ struct ipc_message *sst_ipc_reply_find_m
 
 	if (ipc->ops.reply_msg_match != NULL)
 		header = ipc->ops.reply_msg_match(header, &mask);
+	else
+		mask = (u64)-1;
 
 	if (list_empty(&ipc->rx_list)) {
 		dev_err(ipc->dev, "error: rx list empty but received 0x%llx\n",
author maintainer
#111 lore raw

PATCH 111/129 ARM: zynq: Use memcpy_toio instead of memcpy on smp bring-up

In reply to Greg Kroah-Hartman

From: Luis Araneda <[email protected]>

commit b7005d4ef4f3aa2dc24019ffba03a322557ac43d upstream.

This fixes a kernel panic on memcpy when
FORTIFY_SOURCE is enabled.

The initial smp implementation on commit aa7eb2bb4e4a ("arm: zynq: Add smp support")
used memcpy, which worked fine until commit ee333554fed5 ("ARM: 8749/1: Kconfig: Add ARCH_HAS_FORTIFY_SOURCE") enabled overflow checks at runtime, producing a read overflow panic.

The computed size of memcpy args are:
- p_size (dst): 4294967295 = (size_t) -1
- q_size (src): 1
- size (len): 8

Additionally, the memory is marked as __iomem, so one of the memcpy_* functions should be used for read/write.

Fixes aa7eb2bb4e4a ("arm: zynq: Add smp support")
---
 arch/arm/mach-zynq/platsmp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-zynq/platsmp.c +1 -1
@@ -65,7 +65,7 @@ int zynq_cpun_start(u32 address, int cpu
 			* 0x4: Jump by mov instruction
 			* 0x8: Jumping address
 			*/
-			memcpy((__force void *)zero, &zynq_secondary_trampoline,
+			memcpy_toio(zero, &zynq_secondary_trampoline,
 							trampoline_size);
 			writel(address, zero + trampoline_size);
 
author maintainer
#112 lore raw

PATCH 112/129 alarmtimer: Use EOPNOTSUPP instead of ENOTSUPP

In reply to Greg Kroah-Hartman

From: Thadeu Lima de Souza Cascardo <[email protected]>

commit f18ddc13af981ce3c7b7f26925f099e7c6929aba upstream.

ENOTSUPP is not supposed to be returned to userspace. This was found on an OpenPower machine, where the RTC does not support set_alarm.

On that system, a clock_nanosleep(CLOCK_REALTIME_ALARM, ...) results in "524 Unknown error 524"

Replace it with EOPNOTSUPP which results in the expected "95 Operation not supported" error.

---
 kernel/time/alarmtimer.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
kernel/time/alarmtimer.c +2 -2
@@ -544,7 +544,7 @@ static int alarm_timer_create(struct k_i
 	enum  alarmtimer_type type;
 
 	if (!alarmtimer_get_rtcdev())
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	if (!capable(CAP_WAKE_ALARM))
 		return -EPERM;
@@ -772,7 +772,7 @@ static int alarm_timer_nsleep(const cloc
 	struct restart_block *restart;
 
 	if (!alarmtimer_get_rtcdev())
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	if (flags & ~TIMER_ABSTIME)
 		return -EINVAL;
author maintainer
#113 lore raw

PATCH 113/129 regulator: Defer init completion for a while after late_initcall

In reply to Greg Kroah-Hartman

From: Mark Brown <[email protected]>

commit 55576cf1853798e86f620766e23b604c9224c19c upstream.

The kernel has no way of knowing when we have finished instantiating drivers, between deferred probe and systems that build key drivers as modules we might be doing this long after userspace has booted. This has always been a bit of an issue with regulator_init_complete since it can power off hardware that's not had it's driver loaded which can result in user visible effects, the main case is powering off displays. Practically speaking it's not been an issue in real systems since most systems that use the regulator API are embedded and build in key drivers anyway but with Arm laptops coming on the market it's becoming more of an issue so let's do something about it.

In the absence of any better idea just defer the powering off for 30s after late_initcall(), this is obviously a hack but it should mask the issue for now and it's no more arbitrary than late_initcall() itself. Ideally we'd have some heuristics to detect if we're on an affected system and tune or skip the delay appropriately, and there may be some need for a command line option to be added.

---
 drivers/regulator/core.c |   42 +++++++++++++++++++++++++++++++-----------
 1 file changed, 31 insertions(+), 11 deletions(-)
drivers/regulator/core.c +31 -11
@@ -4452,7 +4452,7 @@ static int __init regulator_init(void)
 /* init early to allow our consumers to complete system booting */
 core_initcall(regulator_init);
 
-static int __init regulator_late_cleanup(struct device *dev, void *data)
+static int regulator_late_cleanup(struct device *dev, void *data)
 {
 	struct regulator_dev *rdev = dev_to_rdev(dev);
 	const struct regulator_ops *ops = rdev->desc->ops;
@@ -4501,18 +4501,9 @@ unlock:
 	return 0;
 }
 
-static int __init regulator_init_complete(void)
+static void regulator_init_complete_work_function(struct work_struct *work)
 {
 	/*
-	 * Since DT doesn't provide an idiomatic mechanism for
-	 * enabling full constraints and since it's much more natural
-	 * with DT to provide them just assume that a DT enabled
-	 * system has full constraints.
-	 */
-	if (of_have_populated_dt())
-		has_full_constraints = true;
-
-	/*
 	 * Regulators may had failed to resolve their input supplies
 	 * when were registered, either because the input supply was
 	 * not registered yet or because its parent device was not
@@ -4529,6 +4520,35 @@ static int __init regulator_init_complet
 	 */
 	class_for_each_device(&regulator_class, NULL, NULL,
 			      regulator_late_cleanup);
+}
+
+static DECLARE_DELAYED_WORK(regulator_init_complete_work,
+			    regulator_init_complete_work_function);
+
+static int __init regulator_init_complete(void)
+{
+	/*
+	 * Since DT doesn't provide an idiomatic mechanism for
+	 * enabling full constraints and since it's much more natural
+	 * with DT to provide them just assume that a DT enabled
+	 * system has full constraints.
+	 */
+	if (of_have_populated_dt())
+		has_full_constraints = true;
+
+	/*
+	 * We punt completion for an arbitrary amount of time since
+	 * systems like distros will load many drivers from userspace
+	 * so consumers might not always be ready yet, this is
+	 * particularly an issue with laptops where this might bounce
+	 * the display off then on.  Ideally we'd get a notification
+	 * from userspace when this happens but we don't so just wait
+	 * a bit and hope we waited long enough.  It'd be better if
+	 * we'd only do this on systems that need it, and a kernel
+	 * command line option might be useful.
+	 */
+	schedule_delayed_work(&regulator_init_complete_work,
+			      msecs_to_jiffies(30000));
 
 	return 0;
 }
author maintainer
#114 lore raw

PATCH 114/129 memcg, kmem: do not fail __GFP_NOFAIL charges

In reply to Greg Kroah-Hartman

From: Michal Hocko <[email protected]>

commit e55d9d9bfb69405bd7615c0f8d229d8fafb3e9b8 upstream.

Thomas has noticed the following NULL ptr dereference when using cgroup v1 kmem limit:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
PGD 0
P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 16923 Comm: gtk-update-icon Not tainted 4.19.51 #42
Hardware name: Gigabyte Technology Co., Ltd. Z97X-Gaming G1/Z97X-Gaming G1, BIOS F9 07/31/2015
RIP: 0010:create_empty_buffers+0x24/0x100
Code: cd 0f 1f 44 00 00 0f 1f 44 00 00 41 54 49 89 d4 ba 01 00 00 00 55 53 48 89 fb e8 97 fe ff ff 48 89 c5 48 89 c2 eb 03 48 89 ca <48> 8b 4a 08 4c 09 22 48 85 c9 75 f1 48 89 6a 08 48 8b 43 18 48 8d
RSP: 0018:ffff927ac1b37bf8 EFLAGS: 00010286
RAX: 0000000000000000 RBX: fffff2d4429fd740 RCX: 0000000100097149
RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff9075a99fbe00
RBP: 0000000000000000 R08: fffff2d440949cc8 R09: 00000000000960c0
R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000000
R13: ffff907601f18360 R14: 0000000000002000 R15: 0000000000001000
FS:  00007fb55b288bc0(0000) GS:ffff90761f8c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 000000007aebc002 CR4: 00000000001606e0
Call Trace:
 create_page_buffers+0x4d/0x60
 __block_write_begin_int+0x8e/0x5a0
 ? ext4_inode_attach_jinode.part.82+0xb0/0xb0
 ? jbd2__journal_start+0xd7/0x1f0
 ext4_da_write_begin+0x112/0x3d0
 generic_perform_write+0xf1/0x1b0
 ? file_update_time+0x70/0x140
 __generic_file_write_iter+0x141/0x1a0
 ext4_file_write_iter+0xef/0x3b0
 __vfs_write+0x17e/0x1e0
 vfs_write+0xa5/0x1a0
 ksys_write+0x57/0xd0
 do_syscall_64+0x55/0x160
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Tetsuo then noticed that this is because the __memcg_kmem_charge_memcg fails __GFP_NOFAIL charge when the kmem limit is reached. This is a wrong behavior because nofail allocations are not allowed to fail. Normal charge path simply forces the charge even if that means to cross the limit. Kmem accounting should be doing the same.

---
 mm/memcontrol.c |   10 ++++++++++
 1 file changed, 10 insertions(+)
mm/memcontrol.c +10 -0
@@ -2325,6 +2325,16 @@ int memcg_kmem_charge_memcg(struct page
 
 	if (!cgroup_subsys_on_dfl(memory_cgrp_subsys) &&
 	    !page_counter_try_charge(&memcg->kmem, nr_pages, &counter)) {
+
+		/*
+		 * Enforce __GFP_NOFAIL allocation because callers are not
+		 * prepared to see failures and likely do not have any failure
+		 * handling code.
+		 */
+		if (gfp & __GFP_NOFAIL) {
+			page_counter_charge(&memcg->kmem, nr_pages);
+			return 0;
+		}
 		cancel_charge(memcg, nr_pages);
 		return -ENOMEM;
 	}
author maintainer
#115 lore raw

PATCH 115/129 ovl: filter of trusted xattr results in audit

In reply to Greg Kroah-Hartman

From: Mark Salyzyn <[email protected]>

commit 5c2e9f346b815841f9bed6029ebcb06415caf640 upstream.

When filtering xattr list for reading, presence of trusted xattr results in a security audit log. However, if there is other content no errno will be set, and if there isn't, the errno will be -ENODATA and not -EPERM as is usually associated with a lack of capability. The check does not block the request to list the xattrs present.

Switch to ns_capable_noaudit to reflect a more appropriate check.

Cc [email protected] # v3.18+
Fixes a082c6f680da ("ovl: filter trusted xattr for non-admin")
---
 fs/overlayfs/inode.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/overlayfs/inode.c +2 -1
@@ -234,7 +234,8 @@ static bool ovl_can_list(const char *s)
 		return true;
 
 	/* Never list trusted.overlay, list other trusted for superuser only */
-	return !ovl_is_private_xattr(s) && capable(CAP_SYS_ADMIN);
+	return !ovl_is_private_xattr(s) &&
+	       ns_capable_noaudit(&init_user_ns, CAP_SYS_ADMIN);
 }
 
 ssize_t ovl_listxattr(struct dentry *dentry, char *list, size_t size)
author maintainer
#116 lore raw

PATCH 116/129 Btrfs: fix use-after-free when using the tree modification log

In reply to Greg Kroah-Hartman

From: Filipe Manana <[email protected]>

commit efad8a853ad2057f96664328a0d327a05ce39c76 upstream.

At ctree.c:get_old_root(), we are accessing a root's header owner field after we have freed the respective extent buffer. This results in an use-after-free that can lead to crashes, and when CONFIG_DEBUG_PAGEALLOC is set, results in a stack trace like the following:

  [ 3876.799331] stack segment: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
  [ 3876.799363] CPU: 0 PID: 15436 Comm: pool Not tainted 5.3.0-rc3-btrfs-next-54 #1
  [ 3876.799385] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
  [ 3876.799433] RIP: 0010:btrfs_search_old_slot+0x652/0xd80 [btrfs]
  (...)
  [ 3876.799502] RSP: 0018:ffff9f08c1a2f9f0 EFLAGS: 00010286
  [ 3876.799518] RAX: ffff8dd300000000 RBX: ffff8dd85a7a9348 RCX: 000000038da26000
  [ 3876.799538] RDX: 0000000000000000 RSI: ffffe522ce368980 RDI: 0000000000000246
  [ 3876.799559] RBP: dae1922adadad000 R08: 0000000008020000 R09: ffffe522c0000000
  [ 3876.799579] R10: ffff8dd57fd788c8 R11: 000000007511b030 R12: ffff8dd781ddc000
  [ 3876.799599] R13: ffff8dd9e6240578 R14: ffff8dd6896f7a88 R15: ffff8dd688cf90b8
  [ 3876.799620] FS:  00007f23ddd97700(0000) GS:ffff8dda20200000(0000) knlGS:0000000000000000
  [ 3876.799643] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [ 3876.799660] CR2: 00007f23d4024000 CR3: 0000000710bb0005 CR4: 00000000003606f0
  [ 3876.799682] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [ 3876.799703] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [ 3876.799723] Call Trace:
  [ 3876.799735]  ? do_raw_spin_unlock+0x49/0xc0
  [ 3876.799749]  ? _raw_spin_unlock+0x24/0x30
  [ 3876.799779]  resolve_indirect_refs+0x1eb/0xc80 [btrfs]
  [ 3876.799810]  find_parent_nodes+0x38d/0x1180 [btrfs]
  [ 3876.799841]  btrfs_check_shared+0x11a/0x1d0 [btrfs]
  [ 3876.799870]  ? extent_fiemap+0x598/0x6e0 [btrfs]
  [ 3876.799895]  extent_fiemap+0x598/0x6e0 [btrfs]
  [ 3876.799913]  do_vfs_ioctl+0x45a/0x700
  [ 3876.799926]  ksys_ioctl+0x70/0x80
  [ 3876.799938]  ? trace_hardirqs_off_thunk+0x1a/0x20
  [ 3876.799953]  __x64_sys_ioctl+0x16/0x20
  [ 3876.799965]  do_syscall_64+0x62/0x220
  [ 3876.799977]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [ 3876.799993] RIP: 0033:0x7f23e0013dd7
  (...)
  [ 3876.800056] RSP: 002b:00007f23ddd96ca8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  [ 3876.800078] RAX: ffffffffffffffda RBX: 00007f23d80210f8 RCX: 00007f23e0013dd7
  [ 3876.800099] RDX: 00007f23d80210f8 RSI: 00000000c020660b RDI: 0000000000000003
  [ 3876.800626] RBP: 000055fa2a2a2440 R08: 0000000000000000 R09: 00007f23ddd96d7c
  [ 3876.801143] R10: 00007f23d8022000 R11: 0000000000000246 R12: 00007f23ddd96d80
  [ 3876.801662] R13: 00007f23ddd96d78 R14: 00007f23d80210f0 R15: 00007f23ddd96d80
  (...)
  [ 3876.805107] ---[ end trace e53161e179ef04f9 ]---

Fix that by saving the root's header owner field into a local variable before freeing the root's extent buffer, and then use that local variable when needed.

Fixes 30b0463a9394d9 ("Btrfs: fix accessing the root pointer in tree mod log functions")
---
 fs/btrfs/ctree.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
fs/btrfs/ctree.c +3 -1
@@ -1406,6 +1406,7 @@ get_old_root(struct btrfs_root *root, u6
 	struct tree_mod_elem *tm;
 	struct extent_buffer *eb = NULL;
 	struct extent_buffer *eb_root;
+	u64 eb_root_owner = 0;
 	struct extent_buffer *old;
 	struct tree_mod_root *old_root = NULL;
 	u64 old_generation = 0;
@@ -1439,6 +1440,7 @@ get_old_root(struct btrfs_root *root, u6
 			free_extent_buffer(old);
 		}
 	} else if (old_root) {
+		eb_root_owner = btrfs_header_owner(eb_root);
 		btrfs_tree_read_unlock(eb_root);
 		free_extent_buffer(eb_root);
 		eb = alloc_dummy_extent_buffer(root->fs_info, logical,
@@ -1457,7 +1459,7 @@ get_old_root(struct btrfs_root *root, u6
 	if (old_root) {
 		btrfs_set_header_bytenr(eb, eb->start);
 		btrfs_set_header_backref_rev(eb, BTRFS_MIXED_BACKREF_REV);
-		btrfs_set_header_owner(eb, btrfs_header_owner(eb_root));
+		btrfs_set_header_owner(eb, eb_root_owner);
 		btrfs_set_header_level(eb, old_root->level);
 		btrfs_set_header_generation(eb, old_generation);
 	}
author maintainer
#117 lore raw

PATCH 117/129 btrfs: Relinquish CPUs in btrfs_compare_trees

In reply to Greg Kroah-Hartman

From: Nikolay Borisov <[email protected]>

commit 6af112b11a4bc1b560f60a618ac9c1dcefe9836e upstream.

When doing any form of incremental send the parent and the child trees need to be compared via btrfs_compare_trees. This can result in long loop chains without ever relinquishing the CPU. This causes softlockup detector to trigger when comparing trees with a lot of items. Example report:

watchdog: BUG: soft lockup - CPU#0 stuck for 24s! [snapperd:16153]
CPU: 0 PID: 16153 Comm: snapperd Not tainted 5.2.9-1-default #1 openSUSE Tumbleweed (unreleased)
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 40000005 (nZcv daif -PAN -UAO)
pc : __ll_sc_arch_atomic_sub_return+0x14/0x20
lr : btrfs_release_extent_buffer_pages+0xe0/0x1e8 [btrfs]
sp : ffff00001273b7e0
Call trace:
 __ll_sc_arch_atomic_sub_return+0x14/0x20
 release_extent_buffer+0xdc/0x120 [btrfs]
 free_extent_buffer.part.0+0xb0/0x118 [btrfs]
 free_extent_buffer+0x24/0x30 [btrfs]
 btrfs_release_path+0x4c/0xa0 [btrfs]
 btrfs_free_path.part.0+0x20/0x40 [btrfs]
 btrfs_free_path+0x24/0x30 [btrfs]
 get_inode_info+0xa8/0xf8 [btrfs]
 finish_inode_if_needed+0xe0/0x6d8 [btrfs]
 changed_cb+0x9c/0x410 [btrfs]
 btrfs_compare_trees+0x284/0x648 [btrfs]
 send_subvol+0x33c/0x520 [btrfs]
 btrfs_ioctl_send+0x8a0/0xaf0 [btrfs]
 btrfs_ioctl+0x199c/0x2288 [btrfs]
 do_vfs_ioctl+0x4b0/0x820
 ksys_ioctl+0x84/0xb8
 __arm64_sys_ioctl+0x28/0x38
 el0_svc_common.constprop.0+0x7c/0x188
 el0_svc_handler+0x34/0x90
 el0_svc+0x8/0xc

Fix this by adding a call to cond_resched at the beginning of the main loop in btrfs_compare_trees.

Fixes 7069830a9e38 ("Btrfs: add btrfs_compare_trees function")
---
 fs/btrfs/ctree.c |    1 +
 1 file changed, 1 insertion(+)
fs/btrfs/ctree.c +1 -0
@@ -5467,6 +5467,7 @@ int btrfs_compare_trees(struct btrfs_roo
 	advance_left = advance_right = 0;
 
 	while (1) {
+		cond_resched();
 		if (advance_left && !left_end_reached) {
 			ret = tree_advance(left_root, left_path, &left_level,
 					left_root_level,
author maintainer
#118 lore raw

PATCH 118/129 md/raid6: Set R5_ReadError when there is read failure on parity disk

In reply to Greg Kroah-Hartman

From: Xiao Ni <[email protected]>

commit 143f6e733b73051cd22dcb80951c6c929da413ce upstream.

7471fb77ce4d ("md/raid6: Fix anomily when recovering a single device in RAID6.") avoids rereading P when it can be computed from other members. However, this misses the chance to re-write the right data to P. This patch sets R5_ReadError if the re-read fails.

Also, when re-read is skipped, we also missed the chance to reset rdev->read_errors to 0. It can fail the disk when there are many read errors on P member disk (other disks don't have read error)

V2: upper layer read request don't read parity/Q data. So there is no need to consider such situation.

This is Reported-by: kbuild test robot <[email protected]>

Fixes 7471fb77ce4d ("md/raid6: Fix anomily when recovering a single device in RAID6.")
---
 drivers/md/raid5.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/md/raid5.c +3 -1
@@ -2416,7 +2416,9 @@ static void raid5_end_read_request(struc
 		    && !test_bit(R5_ReadNoMerge, &sh->dev[i].flags))
 			retry = 1;
 		if (retry)
-			if (test_bit(R5_ReadNoMerge, &sh->dev[i].flags)) {
+			if (sh->qd_idx >= 0 && sh->pd_idx == i)
+				set_bit(R5_ReadError, &sh->dev[i].flags);
+			else if (test_bit(R5_ReadNoMerge, &sh->dev[i].flags)) {
 				set_bit(R5_ReadError, &sh->dev[i].flags);
 				clear_bit(R5_ReadNoMerge, &sh->dev[i].flags);
 			} else
author maintainer
#119 lore raw

PATCH 119/129 cfg80211: Purge frame registrations on iftype change

In reply to Greg Kroah-Hartman

From: Denis Kenzior <[email protected]>

commit c1d3ad84eae35414b6b334790048406bd6301b12 upstream.

Currently frame registrations are not purged, even when changing the interface type. This can lead to potentially weird situations where frames possibly not allowed on a given interface type remain registered due to the type switching happening after registration.

The kernel currently relies on userspace apps to actually purge the registrations themselves, this is not something that the kernel should rely on.

Add a call to cfg80211_mlme_purge_registrations() to forcefully remove any registrations left over prior to switching the iftype.

---
 net/wireless/util.c |    1 +
 1 file changed, 1 insertion(+)
net/wireless/util.c +1 -0
@@ -1051,6 +1051,7 @@ int cfg80211_change_iface(struct cfg8021
 		}
 
 		cfg80211_process_rdev_events(rdev);
+		cfg80211_mlme_purge_registrations(dev->ieee80211_ptr);
 	}
 
 	err = rdev_change_virtual_intf(rdev, dev, ntype, flags, params);
author maintainer
#120 lore raw

PATCH 120/129 /dev/mem: Bail out upon SIGKILL.

In reply to Greg Kroah-Hartman

From: Tetsuo Handa <[email protected]>

commit 8619e5bdeee8b2c685d686281f2d2a6017c4bc15 upstream.

syzbot found that a thread can stall for minutes inside read_mem() or write_mem() after that thread was killed by SIGKILL [1]. Reading from iomem areas of /dev/mem can be slow, depending on the hardware. While reading 2GB at one read() is legal, delaying termination of killed thread for minutes is bad. Thus, allow reading/writing /dev/mem and /dev/kmem to be preemptible and killable.

  [ 1335.912419][T20577] read_mem: sz=4096 count=2134565632
  [ 1335.943194][T20577] read_mem: sz=4096 count=2134561536
  [ 1335.978280][T20577] read_mem: sz=4096 count=2134557440
  [ 1336.011147][T20577] read_mem: sz=4096 count=2134553344
  [ 1336.041897][T20577] read_mem: sz=4096 count=2134549248

Theoretically, reading/writing /dev/mem and /dev/kmem can become "interruptible". But this patch chose "killable". Future patch will make them "interruptible" so that we can revert to "killable" if some program regressed.

[1] https://syzkaller.appspot.com/bug?id=a0e3436829698d5824231251fad9d8e998f94f5e

---
 drivers/char/mem.c |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
drivers/char/mem.c +21 -0
@@ -96,6 +96,13 @@ void __weak unxlate_dev_mem_ptr(phys_add
 }
 #endif
 
+static inline bool should_stop_iteration(void)
+{
+	if (need_resched())
+		cond_resched();
+	return fatal_signal_pending(current);
+}
+
 /*
  * This funcion reads the *physical* memory. The f_pos points directly to the
  * memory location.
@@ -162,6 +169,8 @@ static ssize_t read_mem(struct file *fil
 		p += sz;
 		count -= sz;
 		read += sz;
+		if (should_stop_iteration())
+			break;
 	}
 
 	*ppos += read;
@@ -233,6 +242,8 @@ static ssize_t write_mem(struct file *fi
 		p += sz;
 		count -= sz;
 		written += sz;
+		if (should_stop_iteration())
+			break;
 	}
 
 	*ppos += written;
@@ -446,6 +457,10 @@ static ssize_t read_kmem(struct file *fi
 			read += sz;
 			low_count -= sz;
 			count -= sz;
+			if (should_stop_iteration()) {
+				count = 0;
+				break;
+			}
 		}
 	}
 
@@ -470,6 +485,8 @@ static ssize_t read_kmem(struct file *fi
 			buf += sz;
 			read += sz;
 			p += sz;
+			if (should_stop_iteration())
+				break;
 		}
 		free_page((unsigned long)kbuf);
 	}
@@ -522,6 +539,8 @@ static ssize_t do_write_kmem(unsigned lo
 		p += sz;
 		count -= sz;
 		written += sz;
+		if (should_stop_iteration())
+			break;
 	}
 
 	*ppos += written;
@@ -573,6 +592,8 @@ static ssize_t write_kmem(struct file *f
 			buf += sz;
 			virtr += sz;
 			p += sz;
+			if (should_stop_iteration())
+				break;
 		}
 		free_page((unsigned long)kbuf);
 	}
author maintainer
#121 lore raw

PATCH 121/129 ext4: fix warning inside ext4_convert_unwritten_extents_endio

In reply to Greg Kroah-Hartman

From: Rakesh Pandit <[email protected]>

commit e3d550c2c4f2f3dba469bc3c4b83d9332b4e99e1 upstream.

Really enable warning when CONFIG_EXT4_DEBUG is set and fix missing first argument. This was introduced in commit ff95ec22cd7f ("ext4:
add warning to ext4_convert_unwritten_extents_endio") and splitting extents inside endio would trigger it.

Fixes ff95ec22cd7f ("ext4: add warning to ext4_convert_unwritten_extents_endio")
---
 fs/ext4/extents.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
fs/ext4/extents.c +2 -2
@@ -3755,8 +3755,8 @@ static int ext4_convert_unwritten_extent
 	 * illegal.
 	 */
 	if (ee_block != map->m_lblk || ee_len > map->m_len) {
-#ifdef EXT4_DEBUG
-		ext4_warning("Inode (%ld) finished: extent logical block %llu,"
+#ifdef CONFIG_EXT4_DEBUG
+		ext4_warning(inode->i_sb, "Inode (%ld) finished: extent logical block %llu,"
 			     " len %u; IO logical block %llu, len %u",
 			     inode->i_ino, (unsigned long long)ee_block, ee_len,
 			     (unsigned long long)map->m_lblk, map->m_len);
author maintainer
#122 lore raw

PATCH 122/129 ext4: fix punch hole for inline_data file systems

In reply to Greg Kroah-Hartman

From: Theodore Ts'o <[email protected]>

commit c1e8220bd316d8ae8e524df39534b8a412a45d5e upstream.

If a program attempts to punch a hole on an inline data file, we need to convert it to a normal file first.

This was detected using ext4/032 using the adv configuration. Simple reproducer:

mke2fs -Fq -t ext4 -O inline_data /dev/vdc
mount /vdc
echo "" > /vdc/testfile
xfs_io -c 'truncate 33554432' /vdc/testfile
xfs_io -c 'fpunch 0 1048576' /vdc/testfile
umount /vdc
e2fsck -fy /dev/vdc

---
 fs/ext4/inode.c |    9 +++++++++
 1 file changed, 9 insertions(+)
fs/ext4/inode.c +9 -0
@@ -3957,6 +3957,15 @@ int ext4_punch_hole(struct inode *inode,
 
 	trace_ext4_punch_hole(inode, offset, length, 0);
 
+	ext4_clear_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA);
+	if (ext4_has_inline_data(inode)) {
+		down_write(&EXT4_I(inode)->i_mmap_sem);
+		ret = ext4_convert_inline_data(inode);
+		up_write(&EXT4_I(inode)->i_mmap_sem);
+		if (ret)
+			return ret;
+	}
+
 	/*
 	 * Write out all dirty pages to avoid race conditions
 	 * Then release them.
author maintainer
#123 lore raw

PATCH 123/129 quota: fix wrong condition in is_quota_modification()

In reply to Greg Kroah-Hartman

From: Chao Yu <[email protected]>

commit 6565c182094f69e4ffdece337d395eb7ec760efc upstream.

Quoted from
commit 3da40c7b0898 ("ext4: only call ext4_truncate when size <= isize")

" At LSF we decided that if we truncate up from isize we shouldn't trim
fallocated blocks that were fallocated with KEEP_SIZE and are past the
new i_size. This patch fixes ext4 to do this. "

And generic/092 of fstest have covered this case for long time, however is_quota_modification() didn't adjust based on that rule, so that in below condition, we will lose to quota block change:
- fallocate blocks beyond EOF
- remount
- truncate(file_path, file_size)

Fix it.

Fixes 3da40c7b0898 ("ext4: only call ext4_truncate when size <= isize")
---
 include/linux/quotaops.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/quotaops.h +1 -1
@@ -21,7 +21,7 @@ static inline struct quota_info *sb_dqop
 /* i_mutex must being held */
 static inline bool is_quota_modification(struct inode *inode, struct iattr *ia)
 {
-	return (ia->ia_valid & ATTR_SIZE && ia->ia_size != inode->i_size) ||
+	return (ia->ia_valid & ATTR_SIZE) ||
 		(ia->ia_valid & ATTR_UID && !uid_eq(ia->ia_uid, inode->i_uid)) ||
 		(ia->ia_valid & ATTR_GID && !gid_eq(ia->ia_gid, inode->i_gid));
 }
author maintainer
#124 lore raw

PATCH 124/129 hwrng: core - dont wait on add_early_randomness()

In reply to Greg Kroah-Hartman

From: Laurent Vivier <[email protected]>

commit 78887832e76541f77169a24ac238fccb51059b63 upstream.

add_early_randomness() is called by hwrng_register() when the hardware is added. If this hardware and its module are present at boot, and if there is no data available the boot hangs until data are available and can't be interrupted.

For instance, in the case of virtio-rng, in some cases the host can be not able to provide enough entropy for all the guests.

We can have two easy ways to reproduce the problem but they rely on misconfiguration of the hypervisor or the egd daemon:

- if virtio-rng device is configured to connect to the egd daemon of the host but when the virtio-rng driver asks for data the daemon is not connected,

- if virtio-rng device is configured to connect to the egd daemon of the host but the egd daemon doesn't provide data.

The guest kernel will hang at boot until the virtio-rng driver provides enough data.

To avoid that, call rng_get_data() in non-blocking mode (wait=0) from add_early_randomness().

Fixes d9e797261933 ("hwrng: add randomness to system from rng...")
---
 drivers/char/hw_random/core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/char/hw_random/core.c +1 -1
@@ -88,7 +88,7 @@ static void add_early_randomness(struct
 	size_t size = min_t(size_t, 16, rng_buffer_size());
 
 	mutex_lock(&reading_mutex);
-	bytes_read = rng_get_data(rng, rng_buffer, size, 1);
+	bytes_read = rng_get_data(rng, rng_buffer, size, 0);
 	mutex_unlock(&reading_mutex);
 	if (bytes_read > 0)
 		add_device_randomness(rng_buffer, bytes_read);
author maintainer
#125 lore raw

PATCH 125/129 i2c: riic: Clear NACK in tend isr

In reply to Greg Kroah-Hartman

From: Chris Brandt <[email protected]>

commit a71e2ac1f32097fbb2beab098687a7a95c84543e upstream.

The NACKF flag should be cleared in INTRIICNAKI interrupt processing as description in HW manual.

This issue shows up quickly when PREEMPT_RT is applied and a device is probed that is not plugged in (like a touchscreen controller). The result is endless interrupts that halt system boot.

---
 drivers/i2c/busses/i2c-riic.c |    1 +
 1 file changed, 1 insertion(+)
drivers/i2c/busses/i2c-riic.c +1 -0
@@ -212,6 +212,7 @@ static irqreturn_t riic_tend_isr(int irq
 	if (readb(riic->base + RIIC_ICSR2) & ICSR2_NACKF) {
 		/* We got a NACKIE */
 		readb(riic->base + RIIC_ICDRR);	/* dummy read */
+		riic_clear_set_bit(riic, ICSR2_NACKF, 0, RIIC_ICSR2);
 		riic->err = -ENXIO;
 	} else if (riic->bytes_left) {
 		return IRQ_NONE;
author maintainer
#126 lore raw

PATCH 126/129 CIFS: fix max ea value size

In reply to Greg Kroah-Hartman

From: Murphy Zhou <[email protected]>

commit 63d37fb4ce5ae7bf1e58f906d1bf25f036fe79b2 upstream.

It should not be larger then the slab max buf size. If user specifies a larger size, it passes this check and goes straightly to SMB2_set_info_init performing an insecure memcpy.

---
 fs/cifs/xattr.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/cifs/xattr.c +1 -1
@@ -31,7 +31,7 @@
 #include "cifs_fs_sb.h"
 #include "cifs_unicode.h"
 
-#define MAX_EA_VALUE_SIZE 65535
+#define MAX_EA_VALUE_SIZE CIFSMaxBufSize
 #define CIFS_XATTR_CIFS_ACL "system.cifs_acl"
 #define CIFS_XATTR_ATTRIB "cifs.dosattrib"  /* full name: user.cifs.dosattrib */
 #define CIFS_XATTR_CREATETIME "cifs.creationtime"  /* user.cifs.creationtime */
author maintainer
#127 lore raw

PATCH 127/129 CIFS: Fix oplock handling for SMB 2.1+ protocols

In reply to Greg Kroah-Hartman

From: Pavel Shilovsky <[email protected]>

commit a016e2794fc3a245a91946038dd8f34d65e53cc3 upstream.

There may be situations when a server negotiates SMB 2.1 protocol version or higher but responds to a CREATE request with an oplock rather than a lease.

Currently the client doesn't handle such a case correctly:
when another CREATE comes in the server sends an oplock break to the initial CREATE and the client doesn't send an ack back due to a wrong caching level being set (READ instead of RWH). Missing an oplock break ack makes the server wait until the break times out which dramatically increases the latency of the second CREATE.

Fix this by properly detecting oplocks when using SMB 2.1 protocol version and higher.

---
 fs/cifs/smb2ops.c |    5 +++++
 1 file changed, 5 insertions(+)
fs/cifs/smb2ops.c +5 -0
@@ -1419,6 +1419,11 @@ smb21_set_oplock_level(struct cifsInodeI
 	if (oplock == SMB2_OPLOCK_LEVEL_NOCHANGE)
 		return;
 
+	/* Check if the server granted an oplock rather than a lease */
+	if (oplock & SMB2_OPLOCK_LEVEL_EXCLUSIVE)
+		return smb2_set_oplock_level(cinode, oplock, epoch,
+					     purge_cache);
+
 	if (oplock & SMB2_LEASE_READ_CACHING_HE) {
 		new_oplock |= CIFS_CACHE_READ_FLG;
 		strcat(message, "R");
author maintainer
#128 lore raw

PATCH 128/129 btrfs: qgroup: Drop quota_root and fs_info parameters from update_qgroup_status_item

In reply to Greg Kroah-Hartman

From: Lu Fengqi <[email protected]>

[ Upstream commit 2e980acdd829742966c6a7e565ef3382c0717295 ]

They can be fetched from the transaction handle.

---
 fs/btrfs/qgroup.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
fs/btrfs/qgroup.c +6 -6
index f25233093d68c..088dc7d38c136 100644
@@ -759,10 +759,10 @@ static int update_qgroup_info_item(struct btrfs_trans_handle *trans,
 	return ret;
 }
 
-static int update_qgroup_status_item(struct btrfs_trans_handle *trans,
-				     struct btrfs_fs_info *fs_info,
-				    struct btrfs_root *root)
+static int update_qgroup_status_item(struct btrfs_trans_handle *trans)
 {
+	struct btrfs_fs_info *fs_info = trans->fs_info;
+	struct btrfs_root *quota_root = fs_info->quota_root;
 	struct btrfs_path *path;
 	struct btrfs_key key;
 	struct extent_buffer *l;
@@ -778,7 +778,7 @@ static int update_qgroup_status_item(struct btrfs_trans_handle *trans,
 	if (!path)
 		return -ENOMEM;
 
-	ret = btrfs_search_slot(trans, root, &key, path, 0, 1);
+	ret = btrfs_search_slot(trans, quota_root, &key, path, 0, 1);
 	if (ret > 0)
 		ret = -ENOENT;
 
@@ -1863,7 +1863,7 @@ int btrfs_run_qgroups(struct btrfs_trans_handle *trans,
 		fs_info->qgroup_flags &= ~BTRFS_QGROUP_STATUS_FLAG_ON;
 	spin_unlock(&fs_info->qgroup_lock);
 
-	ret = update_qgroup_status_item(trans, fs_info, quota_root);
+	ret = update_qgroup_status_item(trans);
 	if (ret)
 		fs_info->qgroup_flags |= BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT;
 
@@ -2403,7 +2403,7 @@ static void btrfs_qgroup_rescan_worker(struct btrfs_work *work)
 			  err);
 		goto done;
 	}
-	ret = update_qgroup_status_item(trans, fs_info, fs_info->quota_root);
+	ret = update_qgroup_status_item(trans);
 	if (ret < 0) {
 		err = ret;
 		btrfs_err(fs_info, "fail to update qgroup status: %d", err);
Signature · 1 line
2.20.1
author maintainer
#129 lore raw

PATCH 129/129 Btrfs: fix race setting up and completing qgroup rescan workers

In reply to Greg Kroah-Hartman

From: Filipe Manana <[email protected]>

[ Upstream commit 13fc1d271a2e3ab8a02071e711add01fab9271f6 ]

There is a race between setting up a qgroup rescan worker and completing a qgroup rescan worker that can lead to callers of the qgroup rescan wait ioctl to either not wait for the rescan worker to complete or to hang forever due to missing wake ups. The following diagram shows a sequence of steps that illustrates the race.

CPU 1 CPU 2 CPU 3

btrfs_ioctl_quota_rescan()
btrfs_qgroup_rescan()
qgroup_rescan_init()

    mutex_lock(&fs_info->qgroup_rescan_lock)
    spin_lock(&fs_info->qgroup_lock)

    fs_info->qgroup_flags |=
      BTRFS_QGROUP_STATUS_FLAG_RESCAN

    init_completion(
      &fs_info->qgroup_rescan_completion)

    fs_info->qgroup_rescan_running = true

    mutex_unlock(&fs_info->qgroup_rescan_lock)
    spin_unlock(&fs_info->qgroup_lock)

    btrfs_init_work()
     --> starts the worker

                                                        btrfs_qgroup_rescan_worker()
                                                         mutex_lock(&fs_info->qgroup_rescan_lock)

                                                         fs_info->qgroup_flags &=
                                                           ~BTRFS_QGROUP_STATUS_FLAG_RESCAN

                                                         mutex_unlock(&fs_info->qgroup_rescan_lock)

                                                         starts transaction, updates qgroup status
                                                         item, etc

                                                                                                           btrfs_ioctl_quota_rescan()
                                                                                                            btrfs_qgroup_rescan()
                                                                                                             qgroup_rescan_init()
                                                                                                              mutex_lock(&fs_info->qgroup_rescan_lock)
                                                                                                              spin_lock(&fs_info->qgroup_lock)

                                                                                                              fs_info->qgroup_flags |=
                                                                                                                BTRFS_QGROUP_STATUS_FLAG_RESCAN

                                                                                                              init_completion(
                                                                                                                &fs_info->qgroup_rescan_completion)

                                                                                                              fs_info->qgroup_rescan_running = true

                                                                                                              mutex_unlock(&fs_info->qgroup_rescan_lock)
                                                                                                              spin_unlock(&fs_info->qgroup_lock)

                                                                                                              btrfs_init_work()
                                                                                                               --> starts another worker

                                                         mutex_lock(&fs_info->qgroup_rescan_lock)

                                                         fs_info->qgroup_rescan_running = false

                                                         mutex_unlock(&fs_info->qgroup_rescan_lock)

							 complete_all(&fs_info->qgroup_rescan_completion)

Before the rescan worker started by the task at CPU 3 completes, if another task calls btrfs_ioctl_quota_rescan(), it will get -EINPROGRESS because the flag BTRFS_QGROUP_STATUS_FLAG_RESCAN is set at fs_info->qgroup_flags, which is expected and correct behaviour.

However if other task calls btrfs_ioctl_quota_rescan_wait() before the rescan worker started by the task at CPU 3 completes, it will return immediately without waiting for the new rescan worker to complete, because fs_info->qgroup_rescan_running is set to false by CPU 2.

This race is making test case btrfs/171 (from fstests) to fail often:

btrfs/171 9s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//btrfs/171.out.bad)

#      --- tests/btrfs/171.out     2018-09-16 21:30:48.505104287 +0100
#      +++ /home/fdmanana/git/hub/xfstests/results//btrfs/171.out.bad      2019-09-19 02:01:36.938486039 +0100
#      @@ -1,2 +1,3 @@

# QA output created by 171
# +ERROR: quota rescan failed: Operation now in progress
# Silence is golden
# ...
# (Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/btrfs/171.out /home/fdmanana/git/hub/xfstests/results//btrfs/171.out.bad' to see the entire diff)

That is because the test calls the btrfs-progs commands "qgroup quota rescan -w", "qgroup assign" and "qgroup remove" in a sequence that makes calls to the rescan start ioctl fail with -EINPROGRESS (note the "btrfs" commands 'qgroup assign' and 'qgroup remove' often call the rescan start ioctl after calling the qgroup assign ioctl, btrfs_ioctl_qgroup_assign()), since previous waits didn't actually wait for a rescan worker to complete.

Another problem the race can cause is missing wake ups for waiters, since the call to complete_all() happens outside a critical section and after clearing the flag BTRFS_QGROUP_STATUS_FLAG_RESCAN. In the sequence diagram above, if we have a waiter for the first rescan task (executed by CPU 2), then fs_info->qgroup_rescan_completion.wait is not empty, and if after the rescan worker clears BTRFS_QGROUP_STATUS_FLAG_RESCAN and before it calls complete_all() against fs_info->qgroup_rescan_completion, the task at CPU 3 calls init_completion() against fs_info->qgroup_rescan_completion which re-initilizes its wait queue to an empty queue, therefore causing the rescan worker at CPU 2 to call complete_all() against an empty queue, never waking up the task waiting for that rescan worker.

Fix this by clearing BTRFS_QGROUP_STATUS_FLAG_RESCAN and setting fs_info->qgroup_rescan_running to false in the same critical section, delimited by the mutex fs_info->qgroup_rescan_lock, as well as doing the call to complete_all() in that same critical section. This gives the protection needed to avoid rescan wait ioctl callers not waiting for a running rescan worker and the lost wake ups problem, since setting that rescan flag and boolean as well as initializing the wait queue is done already in a critical section delimited by that mutex (at qgroup_rescan_init()).

Fixes 57254b6ebce4ce ("Btrfs: add ioctl to wait for qgroup rescan completion")
Fixes d2c609b834d62f ("btrfs: properly track when rescan worker is running")
---
 fs/btrfs/qgroup.c |   33 +++++++++++++++++++--------------
 1 file changed, 19 insertions(+), 14 deletions(-)
fs/btrfs/qgroup.c +19 -14
@@ -2380,9 +2380,6 @@ out:
 	btrfs_free_path(path);
 
 	mutex_lock(&fs_info->qgroup_rescan_lock);
-	if (!btrfs_fs_closing(fs_info))
-		fs_info->qgroup_flags &= ~BTRFS_QGROUP_STATUS_FLAG_RESCAN;
-
 	if (err > 0 &&
 	    fs_info->qgroup_flags & BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT) {
 		fs_info->qgroup_flags &= ~BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT;
@@ -2398,16 +2395,30 @@ out:
 	trans = btrfs_start_transaction(fs_info->quota_root, 1);
 	if (IS_ERR(trans)) {
 		err = PTR_ERR(trans);
+		trans = NULL;
 		btrfs_err(fs_info,
 			  "fail to start transaction for status update: %d\n",
 			  err);
-		goto done;
 	}
-	ret = update_qgroup_status_item(trans);
-	if (ret < 0) {
-		err = ret;
-		btrfs_err(fs_info, "fail to update qgroup status: %d", err);
+
+	mutex_lock(&fs_info->qgroup_rescan_lock);
+	if (!btrfs_fs_closing(fs_info))
+		fs_info->qgroup_flags &= ~BTRFS_QGROUP_STATUS_FLAG_RESCAN;
+	if (trans) {
+		ret = update_qgroup_status_item(trans);
+		if (ret < 0) {
+			err = ret;
+			btrfs_err(fs_info, "fail to update qgroup status: %d",
+				  err);
+		}
 	}
+	fs_info->qgroup_rescan_running = false;
+	complete_all(&fs_info->qgroup_rescan_completion);
+	mutex_unlock(&fs_info->qgroup_rescan_lock);
+
+	if (!trans)
+		return;
+
 	btrfs_end_transaction(trans, fs_info->quota_root);
 
 	if (btrfs_fs_closing(fs_info)) {
@@ -2418,12 +2429,6 @@ out:
 	} else {
 		btrfs_err(fs_info, "qgroup scan failed with %d", err);
 	}
-
-done:
-	mutex_lock(&fs_info->qgroup_rescan_lock);
-	fs_info->qgroup_rescan_running = false;
-	mutex_unlock(&fs_info->qgroup_rescan_lock);
-	complete_all(&fs_info->qgroup_rescan_completion);
 }
 
 /*
#130 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.9.195 release. There are 129 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat 05 Oct 2019 03:37:47 PM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.195-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

#131 lore raw
In reply to Greg Kroah-Hartman
stable-rc/linux-4.9.y boot: 99 boots: 0 failed, 86 passed with 13 offline (v4.9.194-130-gc1fc11455620)

stable-rc/linux-4.9.y boot: 99 boots: 0 failed, 86 passed with 13 offline (v4.9.194-130-gc1fc11455620)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.9.y/kernel/v4.9.194-130-gc1fc11455620/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.9.y/kernel/v4.9.194-130-gc1fc11455620/

Tree: stable-rc
Branch: linux-4.9.y
Git Describe: v4.9.194-130-gc1fc11455620
Git Commit: c1fc114556201dc059e2c202e99eac038af8495e
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 51 unique boards, 20 SoC families, 13 builds out of 197

Offline Platforms:

arm:

    qcom_defconfig:
        gcc-8
            qcom-apq8064-cm-qs600: 1 offline lab
            qcom-apq8064-ifc6410: 1 offline lab

    davinci_all_defconfig:
        gcc-8
            dm365evm,legacy: 1 offline lab

    sunxi_defconfig:
        gcc-8
            sun5i-r8-chip: 1 offline lab
            sun7i-a20-bananapi: 1 offline lab

    bcm2835_defconfig:
        gcc-8
            bcm2835-rpi-b: 1 offline lab

    multi_v7_defconfig:
        gcc-8
            alpine-db: 1 offline lab
            qcom-apq8064-cm-qs600: 1 offline lab
            qcom-apq8064-ifc6410: 1 offline lab
            sun5i-r8-chip: 1 offline lab
            sun7i-a20-bananapi: 1 offline lab

arm64:

    defconfig:
        gcc-8
            apq8016-sbc: 1 offline lab
            juno-r2: 1 offline lab

---
For more info write to <[email protected]>

maintainer
#132 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.9.195 release. There are 129 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat 05 Oct 2019 03:37:47 PM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.195-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

All tests are passing for Tegra ...

Test results for stable-v4.9:

    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    24 tests:	24 pass, 0 fail

Linux version: 4.9.195-rc1-gc1fc11455620
Boards tested: tegra124-jetson-tk1, tegra20-ventana,

                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

Signature · 1 line
nvpublic
#133 lore raw
In reply to Greg Kroah-Hartman
Quoted 7 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.9.195 release. There are 129 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat 05 Oct 2019 03:37:47 PM UTC. Anything received after that time might be too late.

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.9.195-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: c1fc114556201dc059e2c202e99eac038af8495e
git describe: v4.9.194-130-gc1fc11455620
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.194-130-gc1fc11455620

No regressions (compared to build v4.9.194)

No fixes (compared to build v4.9.194)

Ran 23331 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* ltp-fs-tests
* network-basic-tests
* ltp-open-posix-tests
* prep-tmp-disk
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
* ssuite

Signature · 2 lines
Linaro LKFT
https://lkft.linaro.org
#134 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.9.195 release. There are 129 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat 05 Oct 2019 03:37:47 PM UTC. Anything received after that time might be too late.

Build results:

	total: 172 pass: 172 fail: 0
Qemu test results:
	total: 356 pass: 356 fail: 0

Guenter