rtc: m41t80: set range
Alexandre Belloni
maintainerPATCH 1/1 rtc: m41t80: set range
This is a standard BCD RTC that will fail in 2100. The century bits don't help because 2100 will be considered a leap year while it is not.
Signed-off-by Alexandre Belloni <[email protected]>
--- drivers/rtc/rtc-m41t80.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/rtc/rtc-m41t80.c +2 -3
@@ -235,9 +235,6 @@ static int m41t80_rtc_set_time(struct device *dev, struct rtc_time *tm)unsigned char buf[8 ];int err, flags; -if (tm->tm_year <100 || tm->tm_year >199 ) -return -EINVAL ; - buf[M41T80_REG_SSEC ] =0 ; buf[M41T80_REG_SEC ] =bin2bcd (tm->tm_sec); buf[M41T80_REG_MIN ] =bin2bcd (tm->tm_min);
@@ -925,6 +922,8 @@ static int m41t80_probe(struct i2c_client *client, } m41t80_data->rtc->ops = &m41t80_rtc_ops; + m41t80_data->rtc->range_min =RTC_TIMESTAMP_BEGIN_2000 ; + m41t80_data->rtc->range_max =RTC_TIMESTAMP_END_2099 ;if (client->irq <=0 ) {/* We cannot support UIE mode if we do not have an IRQ line */
Signature · 1 line
2.21.0