Skip to contentSkip to conversation

Optimize the u8500_hsem hwlock driver

PATCH Applied Baolin Wang 3 participants 8 messages Sep 27, 2019 – Oct 5, 2019 Hardware spinlock core

lore
Share & tools
lore
#0 lore raw

cover Optimize the u8500_hsem hwlock driver

This patch set did some Optimization with changing to use devm_xxx() APIs to simplify the code and make code more readable.

Baolin Wang (3):
hwspinlock: u8500_hsem: Change to use
devm_platform_ioremap_resource()
hwspinlock: u8500_hsem: Use devm_kzalloc() to allocate memory
hwspinlock: u8500_hsem: Use devm_hwspin_lock_register() to register
hwlock controller

 drivers/hwspinlock/u8500_hsem.c |   46 +++++++++++----------------------------
 1 file changed, 13 insertions(+), 33 deletions(-)
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH 1/3 hwspinlock: u8500_hsem: Change to use devm_platform_ioremap_resource()

Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together, which can simpify the code.

---
 drivers/hwspinlock/u8500_hsem.c |   20 +++++---------------
 1 file changed, 5 insertions(+), 15 deletions(-)
drivers/hwspinlock/u8500_hsem.c +5 -15
index 572ca79..c247a87 100644
@@ -88,7 +88,6 @@ static int u8500_hsem_probe(struct platform_device *pdev)
 	struct hwspinlock_pdata *pdata = pdev->dev.platform_data;
 	struct hwspinlock_device *bank;
 	struct hwspinlock *hwlock;
-	struct resource *res;
 	void __iomem *io_base;
 	int i, ret, num_locks = U8500_MAX_SEMAPHORE;
 	ulong val;
@@ -96,13 +95,9 @@ static int u8500_hsem_probe(struct platform_device *pdev)
 	if (!pdata)
 		return -ENODEV;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENODEV;
-
-	io_base = ioremap(res->start, resource_size(res));
-	if (!io_base)
-		return -ENOMEM;
+	io_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(io_base))
+		return PTR_ERR(io_base);
 
 	/* make sure protocol 1 is selected */
 	val = readl(io_base + HSEM_CTRL_REG);
@@ -112,10 +107,8 @@ static int u8500_hsem_probe(struct platform_device *pdev)
 	writel(0xFFFF, io_base + HSEM_ICRALL);
 
 	bank = kzalloc(struct_size(bank, lock, num_locks), GFP_KERNEL);
-	if (!bank) {
-		ret = -ENOMEM;
-		goto iounmap_base;
-	}
+	if (!bank)
+		return -ENOMEM;
 
 	platform_set_drvdata(pdev, bank);
 
@@ -135,8 +128,6 @@ static int u8500_hsem_probe(struct platform_device *pdev)
 reg_fail:
 	pm_runtime_disable(&pdev->dev);
 	kfree(bank);
-iounmap_base:
-	iounmap(io_base);
 	return ret;
 }
 
@@ -156,7 +147,6 @@ static int u8500_hsem_remove(struct platform_device *pdev)
 	}
 
 	pm_runtime_disable(&pdev->dev);
-	iounmap(io_base);
 	kfree(bank);
 
 	return 0;
Signature · 1 line
1.7.9.5
#3 lore raw

PATCH 2/3 hwspinlock: u8500_hsem: Use devm_kzalloc() to allocate memory

In reply to Baolin Wang

Use devm_kzalloc() to allocate memory.

---
 drivers/hwspinlock/u8500_hsem.c |   15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)
drivers/hwspinlock/u8500_hsem.c +6 -9
index c247a87..0e8d4ff 100644
@@ -106,7 +106,8 @@ static int u8500_hsem_probe(struct platform_device *pdev)
 	/* clear all interrupts */
 	writel(0xFFFF, io_base + HSEM_ICRALL);
 
-	bank = kzalloc(struct_size(bank, lock, num_locks), GFP_KERNEL);
+	bank = devm_kzalloc(&pdev->dev, struct_size(bank, lock, num_locks),
+			    GFP_KERNEL);
 	if (!bank)
 		return -ENOMEM;
 
@@ -120,15 +121,12 @@ static int u8500_hsem_probe(struct platform_device *pdev)
 
 	ret = hwspin_lock_register(bank, &pdev->dev, &u8500_hwspinlock_ops,
 						pdata->base_id, num_locks);
-	if (ret)
-		goto reg_fail;
+	if (ret) {
+		pm_runtime_disable(&pdev->dev);
+		return ret;
+	}
 
 	return 0;
-
-reg_fail:
-	pm_runtime_disable(&pdev->dev);
-	kfree(bank);
-	return ret;
 }
 
 static int u8500_hsem_remove(struct platform_device *pdev)
@@ -147,7 +145,6 @@ static int u8500_hsem_remove(struct platform_device *pdev)
 	}
 
 	pm_runtime_disable(&pdev->dev);
-	kfree(bank);
 
 	return 0;
 }
Signature · 1 line
1.7.9.5
#5 lore raw

PATCH 3/3 hwspinlock: u8500_hsem: Use devm_hwspin_lock_register() to register hwlock controller

In reply to Baolin Wang

Use devm_hwspin_lock_register() to register the hwlock controller instead of unregistering the hwlock controller explicitly when removing the device.

---
 drivers/hwspinlock/u8500_hsem.c |   11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)
drivers/hwspinlock/u8500_hsem.c +2 -9
index 0e8d4ff..b31141a 100644
@@ -119,8 +119,8 @@ static int u8500_hsem_probe(struct platform_device *pdev)
 	/* no pm needed for HSem but required to comply with hwspilock core */
 	pm_runtime_enable(&pdev->dev);
 
-	ret = hwspin_lock_register(bank, &pdev->dev, &u8500_hwspinlock_ops,
-						pdata->base_id, num_locks);
+	ret = devm_hwspin_lock_register(&pdev->dev, bank, &u8500_hwspinlock_ops,
+					pdata->base_id, num_locks);
 	if (ret) {
 		pm_runtime_disable(&pdev->dev);
 		return ret;
@@ -133,17 +133,10 @@ static int u8500_hsem_remove(struct platform_device *pdev)
 {
 	struct hwspinlock_device *bank = platform_get_drvdata(pdev);
 	void __iomem *io_base = bank->lock[0].priv - HSEM_REGISTER_OFFSET;
-	int ret;
 
 	/* clear all interrupts */
 	writel(0xFFFF, io_base + HSEM_ICRALL);
 
-	ret = hwspin_lock_unregister(bank);
-	if (ret) {
-		dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
-		return ret;
-	}
-
 	pm_runtime_disable(&pdev->dev);
 
 	return 0;
Signature · 1 line
1.7.9.5
Reviewed-by on v1 3/3
#6 lore raw

Re: [PATCH 3/3] hwspinlock: u8500_hsem: Use devm_hwspin_lock_register() to register hwlock controller

Quoted 4 lines · Baolin Wang

Use devm_hwspin_lock_register() to register the hwlock controller instead of unregistering the hwlock controller explicitly when removing the device.

Yours,
Linus Walleij

#7 lore raw
In reply to Baolin Wang
Quoted 3 lines · Baolin Wang

This patch set did some Optimization with changing to use devm_xxx() APIs to simplify the code and make code more readable.

Applied, with Linus' r-b

Thanks,
Bjorn

Quoted 13 lines

Baolin Wang (3):
hwspinlock: u8500_hsem: Change to use
devm_platform_ioremap_resource()
hwspinlock: u8500_hsem: Use devm_kzalloc() to allocate memory
hwspinlock: u8500_hsem: Use devm_hwspin_lock_register() to register
hwlock controller

 drivers/hwspinlock/u8500_hsem.c |   46 +++++++++++----------------------------
 1 file changed, 13 insertions(+), 33 deletions(-)
Signature · 1 line
1.7.9.5