ARM: dts: imx6q-logicpd: Add missing imx6q-logicpd-u-boot for SPL
Subsystems (2)
PATCH v2 1/1 ARM: dts: imx6q-logicpd: Add missing imx6q-logicpd-u-boot for SPL
The SPL device tree is missing the entires for gpio1, uart1, usdhc1 and usdhc2. This creates the missing imx6q-logicpd-u-boot.dtsi file which will enable these functions so SPL can properly setup UART, detect microSD card, and startup.
remove MMC init")
---
V2: Update MAINTAINER
Remove unnecessary empty node.
Update subject to reflect this was missing to imply it should have been there before.
arch/arm/dts/imx6q-logicpd-u-boot.dtsi new file +18 -0
@@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Logic PD <[email protected]> + */ + +#include "imx6qdl-u-boot.dtsi" + +&uart1 { + u-boot,dm-spl; +}; + +&usdhc1 { + u-boot,dm-spl; +}; + +&usdhc2 { + u-boot,dm-spl; +};
board/logicpd/imx6/MAINTAINERS +1 -0
@@ -7,3 +7,4 @@ F: configs/imx6q_logic_defconfig F: arch/arm/dts/imx6-logicpd-baseboard.dtsi F: arch/arm/dts/imx6-logicpd-som.dtsi F: arch/arm/dts/imx6q-logicpd.dts +F: arch/arm/dts/imx6q-logicpd-u-boot.dtsi
Signature · 1 line
2.17.1
PATCH v2 1/1 ARM: dts: imx6q-logicpd: Add missing imx6q-logicpd-u-boot for SPL
Quoted 6 lines · Adam Ford
The SPL device tree is missing the entires for gpio1, uart1, usdhc1 and usdhc2. This creates the missing
imx6q-logicpd-u-boot.dtsifile which will enable these functions so SPL can properly setup UART, detect microSD card, and startup.
Stefano / Tom,
Is there any way we can pull this in for the next RC candidate? Without this patch, the imx6_logic boards are broken because I forgot to include this file in my original patch when I enabled SPL_OF_CONTROL.
We can disregard the original patch for this V2 if helps clean up the
to-do list in patchwork.
thank you,
adam
Quoted 45 lines
Fixes 8f4691e31a18 ("ARM: imx6q_logic: With SPL_OF_CONTROL enabled,remove MMC init")
Signed-off-by Adam Ford <[email protected]>---
V2: Update MAINTAINER
Remove unnecessary empty node.
Update subject to reflect this was missing to imply it should have been there before.arch/arm/dts/imx6q-logicpd-u-boot.dtsi new file +18
-0@@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Logic PD <[email protected]> + */ + +#include "imx6qdl-u-boot.dtsi" + +&uart1 { + u-boot,dm-spl; +}; + +&usdhc1 { + u-boot,dm-spl; +}; + +&usdhc2 { + u-boot,dm-spl; +};board/logicpd/imx6/MAINTAINERS +1
-1@@ -7,3 +7,4 @@ F: configs/imx6q_logic_defconfig F: arch/arm/dts/imx6-logicpd-baseboard.dtsi F: arch/arm/dts/imx6-logicpd-som.dtsi F: arch/arm/dts/imx6q-logicpd.dts +F: arch/arm/dts/imx6q-logicpd-u-boot.dtsi --2.17.1
PATCH v2 1/1 ARM: dts: imx6q-logicpd: Add missing imx6q-logicpd-u-boot for SPL
Quoted 9 lines · Adam Ford
Quoted 6 lines · Adam Ford
The SPL device tree is missing the entires for gpio1, uart1, usdhc1 and usdhc2. This creates the missing
imx6q-logicpd-u-boot.dtsifile which will enable these functions so SPL can properly setup UART, detect microSD card, and startup.
Quoted 9 lines
Stefano / Tom,
Is there any way we can pull this in for the next RC candidate? Without this patch, the
imx6_logicboards are broken because I forgot to include this file in my original patch when I enabledSPL_OF_CONTROL.
We can disregard the original patch for this V2 if helps clean up the
to-do list in patchwork.
Pretty please, with sugar on top, can this patch be applied?
My board does not start without it, because I forgot to include it when I converted to use SPL_OF_CONTROL
Quoted 49 lines
thank you,
adam
Quoted 45 lines
Fixes 8f4691e31a18 ("ARM: imx6q_logic: With SPL_OF_CONTROL enabled,remove MMC init")
Signed-off-by Adam Ford <[email protected]>---
V2: Update MAINTAINER
Remove unnecessary empty node.
Update subject to reflect this was missing to imply it should have been there before.arch/arm/dts/imx6q-logicpd-u-boot.dtsi new file +18
-0@@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Logic PD <[email protected]> + */ + +#include "imx6qdl-u-boot.dtsi" + +&uart1 { + u-boot,dm-spl; +}; + +&usdhc1 { + u-boot,dm-spl; +}; + +&usdhc2 { + u-boot,dm-spl; +};board/logicpd/imx6/MAINTAINERS +1
-1@@ -7,3 +7,4 @@ F: configs/imx6q_logic_defconfig F: arch/arm/dts/imx6-logicpd-baseboard.dtsi F: arch/arm/dts/imx6-logicpd-som.dtsi F: arch/arm/dts/imx6q-logicpd.dts +F: arch/arm/dts/imx6q-logicpd-u-boot.dtsi --2.17.1
PATCH v2 1/1 ARM: dts: imx6q-logicpd: Add missing imx6q-logicpd-u-boot for SPL
In reply to Adam FordQuoted 9 lines · Adam Ford
The SPL device tree is missing the entires for gpio1, uart1, usdhc1 and usdhc2. This creates the missing
imx6q-logicpd-u-boot.dtsifile which will enable these functions so SPL can properly setup UART, detect microSD card, and startup.Fixes 8f4691e31a18 ("ARM: imx6q_logic: With SPL_OF_CONTROL enabled,remove MMC init")
Signed-off-by Adam Ford <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20191005/9b2dc808/attachment.sig>