Skip to contentSkip to conversation

ASoC: msm8916-wcd-digital: Remove broken MIX2 DAPM routes

PATCH In review Stephan Gerhold 2 participants 4 messages Oct 7, 2019 – Oct 9, 2019

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ASoC: msm8916-wcd-digital: Remove broken MIX2 DAPM routes

Since 5.3-rc1, the kernel (correctly) complains about missing widgets when loading msm8916-wcd-digital:

	ASoC: no sink widget found for RX1 MIX2 INP1
	ASoC: Failed to add route IIR1 -> IIR1 -> RX1 MIX2 INP1
	ASoC: no sink widget found for RX2 MIX2 INP1
	ASoC: Failed to add route IIR1 -> IIR1 -> RX2 MIX2 INP1
	ASoC: no sink widget found for RX1 MIX2 INP1
	ASoC: Failed to add route IIR2 -> IIR2 -> RX1 MIX2 INP1
	ASoC: no sink widget found for RX2 MIX2 INP1
	ASoC: Failed to add route IIR2 -> IIR2 -> RX2 MIX2 INP1

This happens because RX1/2 MIX2 INP1 is not actually supported by msm8916-wcd-digital for some reason. There were some traces of it in the initial patch, but the last remnants were removed in
commit fecd5c09ddf8 ("ASoC: msm8916-wcd-digital: remove few unused variables").

On 5.3 everything seemingly worked even with that error, but on 5.4-rc1 the sound card is no longer successfully registered:

	qcom-apq8016-sbc 7702000.sound: ASoC: failed to instantiate card -19

This happens because a check for the return code of snd_soc_dapm_add_routes() was added in
commit daa480bde6b3 ("ASoC: soc-core: tidyup for snd_soc_dapm_add_routes()").

Avoid the error by removing the routes that reference the missing widgets.

Fixes ef8a4757a6db ("ASoC: msm8916-wcd-digital: Add sidetone support")
---
 sound/soc/codecs/msm8916-wcd-digital.c | 5 -----
 1 file changed, 5 deletions(-)
sound/soc/codecs/msm8916-wcd-digital.c +0 -5
index 9fa5d44fdc79..36d8f619e298 100644
@@ -1022,11 +1022,6 @@ static const struct snd_soc_dapm_route msm8916_wcd_digital_audio_map[] = {
 	{"RX3 MIX1 INP2", "IIR1", "IIR1"},
 	{"RX3 MIX1 INP2", "IIR2", "IIR2"},
 
-	{"RX1 MIX2 INP1", "IIR1", "IIR1"},
-	{"RX2 MIX2 INP1", "IIR1", "IIR1"},
-	{"RX1 MIX2 INP1", "IIR2", "IIR2"},
-	{"RX2 MIX2 INP1", "IIR2", "IIR2"},
-
 	{"IIR1", NULL, "IIR1 INP1 MUX"},
 	{"IIR1 INP1 MUX", "DEC1", "DEC1 MUX"},
 	{"IIR1 INP1 MUX", "DEC2", "DEC2 MUX"},
Signature · 6 lines
2.23.0

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
#1 lore raw

Hi Stephan,
Thanks for testing and reporting this!

Quoted 12 lines · Stephan Gerhold

Since 5.3-rc1, the kernel (correctly) complains about missing widgets when loading msm8916-wcd-digital:

	ASoC: no sink widget found for RX1 MIX2 INP1
	ASoC: Failed to add route IIR1 -> IIR1 -> RX1 MIX2 INP1
	ASoC: no sink widget found for RX2 MIX2 INP1
	ASoC: Failed to add route IIR1 -> IIR1 -> RX2 MIX2 INP1
	ASoC: no sink widget found for RX1 MIX2 INP1
	ASoC: Failed to add route IIR2 -> IIR2 -> RX1 MIX2 INP1
	ASoC: no sink widget found for RX2 MIX2 INP1
	ASoC: Failed to add route IIR2 -> IIR2 -> RX2 MIX2 INP1
Quoted 2 lines

This happens because RX1/2 MIX2 INP1 is not actually supported by msm8916-wcd-digital for some reason. There were some traces of it

RX1/2 MIX2 path is supported by the codec with IIR1 and IIR2 inputs on INP1.

MIX2 path was not added when we added first codec support as there was no IIR support. I think I totally missed adding this while adding IIR support. Better fix here would be to add that missing path.

Can you try this patch?

------------------------------------->cut<-----------------------------

From c54cc63897794efdf3c9fa8886d8377f80c272f8 Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <[email protected]>
Date: Wed, 9 Oct 2019 10:10:09 +0100
Subject: [PATCH] ASoC: msm8916-wcd-digital: add missing MIX2 path for RX1/2

This patch adds missing MIX2 path on RX1/2 which take IIR1 and IIR2 as inputs.

Without this patch sound card fails to intialize with below warning:

ASoC: no sink widget found for RX1 MIX2 INP1
ASoC: Failed to add route IIR1 -> IIR1 -> RX1 MIX2 INP1
ASoC: no sink widget found for RX2 MIX2 INP1
ASoC: Failed to add route IIR1 -> IIR1 -> RX2 MIX2 INP1
ASoC: no sink widget found for RX1 MIX2 INP1
ASoC: Failed to add route IIR2 -> IIR2 -> RX1 MIX2 INP1
ASoC: no sink widget found for RX2 MIX2 INP1
ASoC: Failed to add route IIR2 -> IIR2 -> RX2 MIX2 INP1

---
 sound/soc/codecs/msm8916-wcd-digital.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
sound/soc/codecs/msm8916-wcd-digital.c +22 -0
index 9fa5d44fdc79..58b2468fb2a7 100644
@@ -243,6 +243,10 @@ static const char *const rx_mix1_text[] = {
 	"ZERO", "IIR1", "IIR2", "RX1", "RX2", "RX3"
 };
 
+static const char * const rx_mix2_text[] = {
+	"ZERO", "IIR1", "IIR2"
+};
+
 static const char *const dec_mux_text[] = {
 	"ZERO", "ADC1", "ADC2", "ADC3", "DMIC1", "DMIC2"
 };
@@ -270,6 +274,16 @@ static const struct soc_enum rx3_mix1_inp_enum[] = {
 	SOC_ENUM_SINGLE(LPASS_CDC_CONN_RX3_B2_CTL, 0, 6, rx_mix1_text),
 };
 
+/* RX1 MIX2 */
+static const struct soc_enum rx_mix2_inp1_chain_enum =
+	SOC_ENUM_SINGLE(LPASS_CDC_CONN_RX1_B3_CTL,
+		0, 3, rx_mix2_text);
+
+/* RX2 MIX2 */
+static const struct soc_enum rx2_mix2_inp1_chain_enum =
+	SOC_ENUM_SINGLE(LPASS_CDC_CONN_RX2_B3_CTL,
+		0, 3, rx_mix2_text);
+
 /* DEC */
 static const struct soc_enum dec1_mux_enum = SOC_ENUM_SINGLE(
 				LPASS_CDC_CONN_TX_B1_CTL, 0, 6, dec_mux_text);
@@ -309,6 +323,10 @@ static const struct snd_kcontrol_new rx3_mix1_inp2_mux = SOC_DAPM_ENUM(
 				"RX3 MIX1 INP2 Mux", rx3_mix1_inp_enum[1]);
 static const struct snd_kcontrol_new rx3_mix1_inp3_mux = SOC_DAPM_ENUM(
 				"RX3 MIX1 INP3 Mux", rx3_mix1_inp_enum[2]);
+static const struct snd_kcontrol_new rx1_mix2_inp1_mux = SOC_DAPM_ENUM(
+				"RX1 MIX2 INP1 Mux", rx_mix2_inp1_chain_enum);
+static const struct snd_kcontrol_new rx2_mix2_inp1_mux = SOC_DAPM_ENUM(
+				"RX2 MIX2 INP1 Mux", rx2_mix2_inp1_chain_enum);
 
 /* Digital Gain control -38.4 dB to +38.4 dB in 0.3 dB steps */
 static const DECLARE_TLV_DB_SCALE(digital_gain, -3840, 30, 0);
@@ -740,6 +758,10 @@ static const struct snd_soc_dapm_widget msm8916_wcd_digital_dapm_widgets[] = {
 			 &rx3_mix1_inp2_mux),
 	SND_SOC_DAPM_MUX("RX3 MIX1 INP3", SND_SOC_NOPM, 0, 0,
 			 &rx3_mix1_inp3_mux),
+	SND_SOC_DAPM_MUX("RX1 MIX2 INP1", SND_SOC_NOPM, 0, 0,
+			 &rx1_mix2_inp1_mux),
+	SND_SOC_DAPM_MUX("RX2 MIX2 INP1", SND_SOC_NOPM, 0, 0,
+			 &rx2_mix2_inp1_mux),
 
 	SND_SOC_DAPM_MUX("CIC1 MUX", SND_SOC_NOPM, 0, 0, &cic1_mux),
 	SND_SOC_DAPM_MUX("CIC2 MUX", SND_SOC_NOPM, 0, 0, &cic2_mux),
Signature · 3 lines
2.21.0

------------------------------------->cut<-----------------------------
Quoted 27 lines

in the initial patch, but the last remnants were removed in
commit fecd5c09ddf8 ("ASoC: msm8916-wcd-digital: remove few unused variables").

On 5.3 everything seemingly worked even with that error, but on 5.4-rc1 the sound card is no longer successfully registered:

	qcom-apq8016-sbc 7702000.sound: ASoC: failed to instantiate card -19

This happens because a check for the return code of snd_soc_dapm_add_routes() was added in
commit daa480bde6b3 ("ASoC: soc-core: tidyup for snd_soc_dapm_add_routes()").

Avoid the error by removing the routes that reference the missing widgets.

Fixes ef8a4757a6db ("ASoC: msm8916-wcd-digital: Add sidetone support")
---
  sound/soc/codecs/msm8916-wcd-digital.c | 5 -----
  1 file changed, 5 deletions(-)
sound/soc/codecs/msm8916-wcd-digital.c +0 -0
index 9fa5d44fdc79..36d8f619e298 100644
@@ -1022,11 +1022,6 @@ static const struct snd_soc_dapm_route msm8916_wcd_digital_audio_map[] = {
  	{"RX3 MIX1 INP2", "IIR1", "IIR1"},

sound/soc/codecs/msm8916-wcd-digital.c static const struct snd_soc_dapm_route msm8916_wcd_digital_audio_map[] = { · line 1027

Quoted 10 lines
sound/soc/codecs/msm8916-wcd-digital.c +0 -5
  	{"RX3 MIX1 INP2", "IIR2", "IIR2"},
 
-	{"RX1 MIX2 INP1", "IIR1", "IIR1"},
-	{"RX2 MIX2 INP1", "IIR1", "IIR1"},
-	{"RX1 MIX2 INP1", "IIR2", "IIR2"},
-	{"RX2 MIX2 INP1", "IIR2", "IIR2"},
-
  	{"IIR1", NULL, "IIR1 INP1 MUX"},
  	{"IIR1 INP1 MUX", "DEC1", "DEC1 MUX"},
  	{"IIR1 INP1 MUX", "DEC2", "DEC2 MUX"},

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

author Tested-by
#2 lore raw
Quoted 16 lines · Srinivas Kandagatla

Hi Stephan,
Thanks for testing and reporting this!

Quoted 12 lines · Stephan Gerhold

Since 5.3-rc1, the kernel (correctly) complains about missing widgets when loading msm8916-wcd-digital:

	ASoC: no sink widget found for RX1 MIX2 INP1
	ASoC: Failed to add route IIR1 -> IIR1 -> RX1 MIX2 INP1
	ASoC: no sink widget found for RX2 MIX2 INP1
	ASoC: Failed to add route IIR1 -> IIR1 -> RX2 MIX2 INP1
	ASoC: no sink widget found for RX1 MIX2 INP1
	ASoC: Failed to add route IIR2 -> IIR2 -> RX1 MIX2 INP1
	ASoC: no sink widget found for RX2 MIX2 INP1
	ASoC: Failed to add route IIR2 -> IIR2 -> RX2 MIX2 INP1
Quoted 9 lines
Quoted 2 lines

This happens because RX1/2 MIX2 INP1 is not actually supported by msm8916-wcd-digital for some reason. There were some traces of it

RX1/2 MIX2 path is supported by the codec with IIR1 and IIR2 inputs on INP1.

MIX2 path was not added when we added first codec support as there was no IIR support. I think I totally missed adding this while adding IIR support. Better fix here would be to add that missing path.

Either way is fine for me, as long as it gets fixed for 5.4 :)

Quoted 85 lines

Can you try this patch?

------------------------------------->cut<-----------------------------

From c54cc63897794efdf3c9fa8886d8377f80c272f8 Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <[email protected]>
Date: Wed, 9 Oct 2019 10:10:09 +0100
Subject: [PATCH] ASoC: msm8916-wcd-digital: add missing MIX2 path for RX1/2

This patch adds missing MIX2 path on RX1/2 which take IIR1 and IIR2 as inputs.

Without this patch sound card fails to intialize with below warning:

ASoC: no sink widget found for RX1 MIX2 INP1
ASoC: Failed to add route IIR1 -> IIR1 -> RX1 MIX2 INP1
ASoC: no sink widget found for RX2 MIX2 INP1
ASoC: Failed to add route IIR1 -> IIR1 -> RX2 MIX2 INP1
ASoC: no sink widget found for RX1 MIX2 INP1
ASoC: Failed to add route IIR2 -> IIR2 -> RX1 MIX2 INP1
ASoC: no sink widget found for RX2 MIX2 INP1
ASoC: Failed to add route IIR2 -> IIR2 -> RX2 MIX2 INP1

---
 sound/soc/codecs/msm8916-wcd-digital.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
sound/soc/codecs/msm8916-wcd-digital.c +14 -0
index 9fa5d44fdc79..58b2468fb2a7 100644
@@ -243,6 +243,10 @@ static const char *const rx_mix1_text[] = {
 	"ZERO", "IIR1", "IIR2", "RX1", "RX2", "RX3"
 };
 
+static const char * const rx_mix2_text[] = {
+	"ZERO", "IIR1", "IIR2"
+};
+
 static const char *const dec_mux_text[] = {
 	"ZERO", "ADC1", "ADC2", "ADC3", "DMIC1", "DMIC2"
 };
@@ -270,6 +274,16 @@ static const struct soc_enum rx3_mix1_inp_enum[] = {
 	SOC_ENUM_SINGLE(LPASS_CDC_CONN_RX3_B2_CTL, 0, 6, rx_mix1_text),
 };
 
+/* RX1 MIX2 */
+static const struct soc_enum rx_mix2_inp1_chain_enum =
+	SOC_ENUM_SINGLE(LPASS_CDC_CONN_RX1_B3_CTL,
+		0, 3, rx_mix2_text);
+
+/* RX2 MIX2 */
+static const struct soc_enum rx2_mix2_inp1_chain_enum =
+	SOC_ENUM_SINGLE(LPASS_CDC_CONN_RX2_B3_CTL,
+		0, 3, rx_mix2_text);
+
 /* DEC */
 static const struct soc_enum dec1_mux_enum = SOC_ENUM_SINGLE(
 				LPASS_CDC_CONN_TX_B1_CTL, 0, 6, dec_mux_text);
@@ -309,6 +323,10 @@ static const struct snd_kcontrol_new rx3_mix1_inp2_mux

= SOC_DAPM_ENUM(

sound/soc/codecs/msm8916-wcd-digital.c +8 -0
 				"RX3 MIX1 INP2 Mux", rx3_mix1_inp_enum[1]);
 static const struct snd_kcontrol_new rx3_mix1_inp3_mux = SOC_DAPM_ENUM(
 				"RX3 MIX1 INP3 Mux", rx3_mix1_inp_enum[2]);
+static const struct snd_kcontrol_new rx1_mix2_inp1_mux = SOC_DAPM_ENUM(
+				"RX1 MIX2 INP1 Mux", rx_mix2_inp1_chain_enum);
+static const struct snd_kcontrol_new rx2_mix2_inp1_mux = SOC_DAPM_ENUM(
+				"RX2 MIX2 INP1 Mux", rx2_mix2_inp1_chain_enum);
 
 /* Digital Gain control -38.4 dB to +38.4 dB in 0.3 dB steps */
 static const DECLARE_TLV_DB_SCALE(digital_gain, -3840, 30, 0);
@@ -740,6 +758,10 @@ static const struct snd_soc_dapm_widget
 msm8916_wcd_digital_dapm_widgets[] = {
 			 &rx3_mix1_inp2_mux),
 	SND_SOC_DAPM_MUX("RX3 MIX1 INP3", SND_SOC_NOPM, 0, 0,
 			 &rx3_mix1_inp3_mux),
+	SND_SOC_DAPM_MUX("RX1 MIX2 INP1", SND_SOC_NOPM, 0, 0,
+			 &rx1_mix2_inp1_mux),
+	SND_SOC_DAPM_MUX("RX2 MIX2 INP1", SND_SOC_NOPM, 0, 0,
+			 &rx2_mix2_inp1_mux),
 
 	SND_SOC_DAPM_MUX("CIC1 MUX", SND_SOC_NOPM, 0, 0, &cic1_mux),
Quoted 6 lines

SND_SOC_DAPM_MUX("CIC2 MUX", SND_SOC_NOPM, 0, 0, &cic2_mux),

Signature · 3 lines
2.21.0

------------------------------------->cut<-----------------------------

Thanks for the patch!

I think your mail client messed it up, but I managed to apply it with some manual fixes. It seems to work fine too:

Thanks,
Stephan
_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel