regulator: rk808: Constify rk817 regulator_ops
PATCH 1/3 regulator: rk808: Constify rk817 regulator_ops
These regulator_ops variables never need to be modified, make them const so compiler can put them to .rodata.
--- drivers/regulator/rk808-regulator.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/regulator/rk808-regulator.c +5 -5
@@ -686,7 +686,7 @@ static const struct regulator_linear_range rk805_buck_1_2_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(2300000, 63, 63, 0), }; -static struct regulator_ops rk809_buck5_ops_range = { +static const struct regulator_ops rk809_buck5_ops_range = { .list_voltage = regulator_list_voltage_linear_range, .map_voltage = regulator_map_voltage_linear_range, .get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -700,7 +700,7 @@ static struct regulator_ops rk809_buck5_ops_range = { .set_suspend_disable = rk817_set_suspend_disable, }; -static struct regulator_ops rk817_reg_ops = { +static const struct regulator_ops rk817_reg_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, .get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -713,7 +713,7 @@ static struct regulator_ops rk817_reg_ops = { .set_suspend_disable = rk817_set_suspend_disable, }; -static struct regulator_ops rk817_boost_ops = { +static const struct regulator_ops rk817_boost_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, .get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -725,7 +725,7 @@ static struct regulator_ops rk817_boost_ops = { .set_suspend_disable = rk817_set_suspend_disable, }; -static struct regulator_ops rk817_buck_ops_range = { +static const struct regulator_ops rk817_buck_ops_range = { .list_voltage = regulator_list_voltage_linear_range, .map_voltage = regulator_map_voltage_linear_range, .get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -743,7 +743,7 @@ static struct regulator_ops rk817_buck_ops_range = { .set_suspend_disable = rk817_set_suspend_disable, }; -static struct regulator_ops rk817_switch_ops = { +static const struct regulator_ops rk817_switch_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = rk8xx_is_enabled_wmsk_regmap,
Signature · 1 line
2.20.1
PATCH 2/3 regulator: rk808: Fix warning message in rk817_set_ramp_delay
The default in rk817_set_ramp_delay is 25MV rather than 10MV.
--- drivers/regulator/rk808-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/regulator/rk808-regulator.c +1 -1
@@ -388,7 +388,7 @@ static int rk817_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)break ;default :dev_warn (&rdev->dev, -"%s ramp_delay: %d not supported, setting 10000\n" , +"%s ramp_delay: %d not supported, setting 25000\n" , rdev->desc->name, ramp_delay); }
Signature · 1 line
2.20.1
Mark Brown
maintainerApplied "regulator: rk808: Fix warning message in rk817_set_ramp_delay" to the regulator tree
The patch
regulator: rk808: Fix warning message in rk817_set_ramp_delay
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.5
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From cc37038fe344e6000d30879c27521ee47c534fc8 Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Tue, 8 Oct 2019 09:06:27 +0800
Subject: [PATCH] regulator: rk808: Fix warning message in rk817_set_ramp_delay
The default in rk817_set_ramp_delay is 25MV rather than 10MV.
--- drivers/regulator/rk808-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/regulator/rk808-regulator.c +1 -1
@@ -388,7 +388,7 @@ static int rk817_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)break ;default :dev_warn (&rdev->dev, -"%s ramp_delay: %d not supported, setting 10000\n" , +"%s ramp_delay: %d not supported, setting 25000\n" , rdev->desc->name, ramp_delay); }
Signature · 1 line
2.20.1
PATCH 3/3 regulator: rk808: Remove rk817_set_suspend_voltage function
In reply to Axel LinThe implement is exactly the same as rk808_set_suspend_voltage, so just use rk808_set_suspend_voltage instead.
--- drivers/regulator/rk808-regulator.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-)
drivers/regulator/rk808-regulator.c +1 -16
@@ -411,21 +411,6 @@ static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv) sel); } -static int rk817_set_suspend_voltage (struct regulator_dev *rdev,int uv) -{ -unsigned int reg; -int sel =regulator_map_voltage_linear (rdev, uv, uv); -/* only ldo1~ldo9 */ -if (sel <0 ) -return -EINVAL ; - - reg = rdev->desc->vsel_reg +RK808_SLP_REG_OFFSET ; - -return regmap_update_bits (rdev->regmap, reg, - rdev->desc->vsel_mask, - sel); -} -static int rk808_set_suspend_voltage_range (struct regulator_dev *rdev,int uv) {unsigned int reg;
@@ -708,7 +693,7 @@ static const struct regulator_ops rk817_reg_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = rk8xx_is_enabled_wmsk_regmap, - .set_suspend_voltage = rk817_set_suspend_voltage, + .set_suspend_voltage = rk808_set_suspend_voltage, .set_suspend_enable = rk817_set_suspend_enable, .set_suspend_disable = rk817_set_suspend_disable, };
Signature · 1 line
2.20.1
Mark Brown
maintainerApplied "regulator: rk808: Remove rk817_set_suspend_voltage function" to the regulator tree
The patch
regulator: rk808: Remove rk817_set_suspend_voltage function
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.5
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From 9306a733f8eac86400b9149db6d047dc371e46a2 Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Tue, 8 Oct 2019 09:06:28 +0800
Subject: [PATCH] regulator: rk808: Remove rk817_set_suspend_voltage function
The implement is exactly the same as rk808_set_suspend_voltage, so just use rk808_set_suspend_voltage instead.
--- drivers/regulator/rk808-regulator.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-)
drivers/regulator/rk808-regulator.c +1 -16
@@ -411,21 +411,6 @@ static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv) sel); } -static int rk817_set_suspend_voltage (struct regulator_dev *rdev,int uv) -{ -unsigned int reg; -int sel =regulator_map_voltage_linear (rdev, uv, uv); -/* only ldo1~ldo9 */ -if (sel <0 ) -return -EINVAL ; - - reg = rdev->desc->vsel_reg +RK808_SLP_REG_OFFSET ; - -return regmap_update_bits (rdev->regmap, reg, - rdev->desc->vsel_mask, - sel); -} -static int rk808_set_suspend_voltage_range (struct regulator_dev *rdev,int uv) {unsigned int reg;
@@ -708,7 +693,7 @@ static const struct regulator_ops rk817_reg_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = rk8xx_is_enabled_wmsk_regmap, - .set_suspend_voltage = rk817_set_suspend_voltage, + .set_suspend_voltage = rk808_set_suspend_voltage, .set_suspend_enable = rk817_set_suspend_enable, .set_suspend_disable = rk817_set_suspend_disable, };
Signature · 1 line
2.20.1
Mark Brown
maintainerApplied "regulator: rk808: Constify rk817 regulator_ops" to the regulator tree
In reply to Axel LinThe patch
regulator: rk808: Constify rk817 regulator_ops
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.5
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From 2e67f32296e3f1841793e36ce796f1497614c687 Mon Sep 17 00:00:00 2001
From: Axel Lin <[email protected]>
Date: Tue, 8 Oct 2019 09:06:26 +0800
Subject: [PATCH] regulator: rk808: Constify rk817 regulator_ops
These regulator_ops variables never need to be modified, make them const so compiler can put them to .rodata.
--- drivers/regulator/rk808-regulator.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/regulator/rk808-regulator.c +5 -5
@@ -686,7 +686,7 @@ static const struct regulator_linear_range rk805_buck_1_2_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(2300000, 63, 63, 0), }; -static struct regulator_ops rk809_buck5_ops_range = { +static const struct regulator_ops rk809_buck5_ops_range = { .list_voltage = regulator_list_voltage_linear_range, .map_voltage = regulator_map_voltage_linear_range, .get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -700,7 +700,7 @@ static struct regulator_ops rk809_buck5_ops_range = { .set_suspend_disable = rk817_set_suspend_disable, }; -static struct regulator_ops rk817_reg_ops = { +static const struct regulator_ops rk817_reg_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, .get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -713,7 +713,7 @@ static struct regulator_ops rk817_reg_ops = { .set_suspend_disable = rk817_set_suspend_disable, }; -static struct regulator_ops rk817_boost_ops = { +static const struct regulator_ops rk817_boost_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, .get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -725,7 +725,7 @@ static struct regulator_ops rk817_boost_ops = { .set_suspend_disable = rk817_set_suspend_disable, }; -static struct regulator_ops rk817_buck_ops_range = { +static const struct regulator_ops rk817_buck_ops_range = { .list_voltage = regulator_list_voltage_linear_range, .map_voltage = regulator_map_voltage_linear_range, .get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -743,7 +743,7 @@ static struct regulator_ops rk817_buck_ops_range = { .set_suspend_disable = rk817_set_suspend_disable, }; -static struct regulator_ops rk817_switch_ops = { +static const struct regulator_ops rk817_switch_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = rk8xx_is_enabled_wmsk_regmap,
Signature · 1 line
2.20.1