Add support for Melfas MMS345L touchscreen
Subsystems (3)
cover Add support for Melfas MMS345L touchscreen
This patch series adds support for the Melfas MMS345L touchscreen to the mms114 driver.
MMS345L is used in the Samsung Galaxy A5 (2015) that has recently gained mainline support [1].
Stephan Gerhold (3):
Input: mms114 - use device_get_match_data
dt-bindings: mms114: document melfas,mms345l binding
Input: mms114 - add support for mms345l
.../bindings/input/touchscreen/mms114.txt | 3 +- drivers/input/touchscreen/mms114.c | 44 +++++++++++++------ 2 files changed, 33 insertions(+), 14 deletions(-)
Signature · 1 line
2.23.0
PATCH 1/3 Input: mms114 - use device_get_match_data
device_get_match_data is available now, so we can replace the call to of_device_get_match_data and remove the FIXME comment.
--- drivers/input/touchscreen/mms114.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/input/touchscreen/mms114.c +1 -2
@@ -446,8 +446,7 @@ static int mms114_probe(struct i2c_client *client, data->client = client; data->input_dev = input_dev; -/* FIXME: switch to device_get_match_data() when available */ - match_data =of_device_get_match_data (&client->dev); + match_data =device_get_match_data (&client->dev);if (!match_data)return -EINVAL ;
Signature · 1 line
2.23.0
Re: [PATCH 1/3] Input: mms114 - use device_get_match_data
Hi Stephan,
Quoted 4 lines
device_get_match_datais available now, so we can replace the call toof_device_get_match_dataand remove the FIXME comment.Signed-off-by Stephan Gerhold <[email protected]>
Thanks,
Andi
Re: [PATCH 1/3] Input: mms114 - use device_get_match_data
Quoted 8 lines · Andi Shyti
Hi Stephan,
Quoted 4 lines
device_get_match_datais available now, so we can replace the call toof_device_get_match_dataand remove the FIXME comment.Signed-off-by Stephan Gerhold <[email protected]>Reviewed-by Andi Shyti <[email protected]>
Applied, thank you.
Signature · 1 line
Dmitry
PATCH 2/3 dt-bindings: mms114: document melfas,mms345l binding
In reply to Stephan GerholdThe mms114 driver now supports MMS345L; document the melfas,mms345l binding that is used for it.
--- Documentation/devicetree/bindings/input/touchscreen/mms114.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/input/touchscreen/mms114.txt +2 -1
@@ -1,9 +1,10 @@ -* MELFAS MMS114/MMS152 touchscreen controller +* MELFAS MMS114/MMS152/MMS345L touchscreen controller Required properties: - compatible: should be one of: - "melfas,mms114" - "melfas,mms152" + - "melfas,mms345l" - reg: I2C address of the chip - interrupts: interrupt to which the chip is connected - touchscreen-size-x: See [1]
Signature · 1 line
2.23.0
Re: [PATCH 2/3] dt-bindings: mms114: document melfas,mms345l binding
Hi Stephan,
Quoted 4 lines · Stephan Gerhold
The mms114 driver now supports MMS345L; document the melfas,mms345l binding that is used for it.
Signed-off-by Stephan Gerhold <[email protected]>
Thanks,
Andi
Re: [PATCH 2/3] dt-bindings: mms114: document melfas,mms345l binding
In reply to Stephan GerholdQuoted 8 lines · Stephan Gerhold
The mms114 driver now supports MMS345L; document the melfas,mms345l binding that is used for it.
Signed-off-by Stephan Gerhold <[email protected]>--- Documentation/devicetree/bindings/input/touchscreen/mms114.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
PATCH 3/3 Input: mms114 - add support for mms345l
In reply to Stephan GerholdMMS345L is another first generation touch screen from Melfas, which uses the same registers as MMS152.
However, using I2C_M_NOSTART for it causes errors when reading:
i2c i2c-0: sendbytes: NAK bailout. mms114 0-0048: __mms114_read_reg: i2c transfer failed (-5)
The driver works fine as soon as I2C_M_NOSTART is removed.
Add a separate melfas,mms345l binding, and make use of I2C_M_NOSTART only for MMS114 and MMS152.
---
Note: I was not able to find a datasheet for any of the models, so this change is merely based on testing and comparison with the downstream driver [1].
There was a related patch [2] that removes I2C_M_NOSTART for all models, but it seems abandoned and I do not have any other model for testing. Therefore, this patch implements the least instrusive solution and only removes I2C_M_NOSTART for MMS345L.
[1]: https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/SM-A500FU/drivers/input/touchscreen/mms300_a.c
[2]: https://patchwork.kernel.org/patch/10189541/
--- drivers/input/touchscreen/mms114.c | 43 +++++++++++++++++++++--------- 1 file changed, 31 insertions(+), 12 deletions(-)
drivers/input/touchscreen/mms114.c +31 -12
@@ -54,6 +54,7 @@enum mms_type {TYPE_MMS114 =114 ,TYPE_MMS152 =152 , +TYPE_MMS345L =345 , };struct mms114_data {
@@ -91,9 +92,14 @@ static int __mms114_read_reg(struct mms114_data *data, unsigned int reg,if (reg <=MMS114_MODE_CONTROL && reg + len >MMS114_MODE_CONTROL )BUG (); -/* Write register: use repeated start */ +/* Write register */ xfer[0 ].addr = client->addr; - xfer[0 ].flags =I2C_M_TEN |I2C_M_NOSTART ; +if (data->type !=TYPE_MMS345L ) +/* use repeated start */ + xfer[0 ].flags =I2C_M_TEN |I2C_M_NOSTART ; +else + xfer[0 ].flags = client->flags &I2C_M_TEN ; + xfer[0 ].len =1 ; xfer[0 ].buf = &buf;
@@ -250,6 +256,15 @@ static int mms114_get_version(struct mms114_data *data)int error;switch (data->type) { +case TYPE_MMS345L : + error =__mms114_read_reg (data,MMS152_FW_REV ,3 , buf); +if (error) +return error; + +dev_info (dev,"TSP FW Rev: bootloader 0x%x / core 0x%x / config 0x%x\n" , + buf[0 ], buf[1 ], buf[2 ]); +break ; +case TYPE_MMS152 : error =__mms114_read_reg (data,MMS152_FW_REV ,3 , buf);if (error)
@@ -287,8 +302,8 @@ static int mms114_setup_regs(struct mms114_data *data)if (error <0 )return error; -/* MMS152 has no configuration or power on registers */ -if (data->type ==TYPE_MMS152 ) +/* Only MMS114 has configuration and power on registers */ +if (data->type !=TYPE_MMS114 )return 0 ; error =mms114_set_active (data, true);
@@ -425,11 +440,16 @@ static int mms114_probe(struct i2c_client *client, {struct mms114_data *data;struct input_dev *input_dev; -const void *match_data; +enum mms_type type;int error; -if (!i2c_check_functionality (client->adapter, -I2C_FUNC_PROTOCOL_MANGLING )) { + type = (enum mms_type )device_get_match_data (&client->dev); +if (!type) +return -EINVAL ; + +if (type !=TYPE_MMS345L && + !i2c_check_functionality (client->adapter, +I2C_FUNC_PROTOCOL_MANGLING )) {dev_err (&client->dev,"Need i2c bus that supports protocol mangling\n" );return -ENODEV ;
@@ -446,11 +466,7 @@ static int mms114_probe(struct i2c_client *client, data->client = client; data->input_dev = input_dev; - match_data =device_get_match_data (&client->dev); -if (!match_data) -return -EINVAL ; - - data->type = (enum mms_type )match_data; + data->type = type;input_set_capability (input_dev,EV_ABS ,ABS_MT_POSITION_X );input_set_capability (input_dev,EV_ABS ,ABS_MT_POSITION_Y );
@@ -599,6 +615,9 @@ static const struct of_device_id mms114_dt_match[] = { }, { .compatible = "melfas,mms152", .data = (void *)TYPE_MMS152, + }, { + .compatible = "melfas,mms345l", + .data = (void *)TYPE_MMS345L, }, { } };
Signature · 1 line
2.23.0
Re: [PATCH 3/3] Input: mms114 - add support for mms345l
Hi Stephan,
Quoted 8 lines · Stephan Gerhold
MMS345L is another first generation touch screen from Melfas, which uses the same registers as MMS152.
However, using
I2C_M_NOSTARTfor it causes errors when reading:i2c i2c-0: sendbytes: NAK bailout. mms114 0-0048: __mms114_read_reg: i2c transfer failed (-5)
Quoted 6 lines
The driver works fine as soon as
I2C_M_NOSTARTis removed.Add a separate melfas,mms345l binding, and make use of
I2C_M_NOSTARTonly for MMS114 and MMS152.Signed-off-by Stephan Gerhold <[email protected]>
just a nitpick in case you will resend it (but you don't need to).
drivers/input/touchscreen/mms114.c static int mms114_probe(struct i2c_client *client, · line 446
Quoted 3 lines
drivers/input/touchscreen/mms114.c +1
-2-if (!i2c_check_functionality (client->adapter, -I2C_FUNC_PROTOCOL_MANGLING )) { + type = (enum mms_type )device_get_match_data (&client->dev);
you don't need any cast here.
Thanks,
Andi
Re: [PATCH 3/3] Input: mms114 - add support for mms345l
Quoted 5 lines
drivers/input/touchscreen/mms114.c static int mms114_probe(struct i2c_client *client, · line 446
Quoted 3 lines
drivers/input/touchscreen/mms114.c +1
-2-if (!i2c_check_functionality (client->adapter, -I2C_FUNC_PROTOCOL_MANGLING )) { + type = (enum mms_type )device_get_match_data (&client->dev);you don't need any cast here.
sorry, please ignore :)
Andi
Dmitry Torokhov
maintainerRe: [PATCH 3/3] Input: mms114 - add support for mms345l
In reply to Stephan GerholdQuoted 19 lines · Stephan Gerhold
MMS345L is another first generation touch screen from Melfas, which uses the same registers as MMS152.
However, using
I2C_M_NOSTARTfor it causes errors when reading:i2c i2c-0: sendbytes: NAK bailout. mms114 0-0048: __mms114_read_reg: i2c transfer failed (-5)The driver works fine as soon as
I2C_M_NOSTARTis removed.Add a separate melfas,mms345l binding, and make use of
I2C_M_NOSTARTonly for MMS114 and MMS152.Signed-off-by Stephan Gerhold <[email protected]>---
Note: I was not able to find a datasheet for any of the models, so this change is merely based on testing and comparison with the downstream driver [1].
Quoted 4 lines
There was a related patch [2] that removes
I2C_M_NOSTARTfor all models, but it seems abandoned and I do not have any other model for testing. Therefore, this patch implements the least instrusive solution and only removesI2C_M_NOSTARTfor MMS345L.
Hmm, at this point I am inclined to pick up Andi's patch since it seems to work for you and him and it looks like Android drivers are not using I2C_M_NOSTART. I wonder if this was some quirk/big on the platform where it was originally developed.
Any objections?
Thanks.
Signature · 1 line
Dmitry
Re: [PATCH 3/3] Input: mms114 - add support for mms345l
Hi Dmitry,
Quoted 9 lines
Quoted 4 lines
There was a related patch [2] that removes
I2C_M_NOSTARTfor all models, but it seems abandoned and I do not have any other model for testing. Therefore, this patch implements the least instrusive solution and only removesI2C_M_NOSTARTfor MMS345L.Hmm, at this point I am inclined to pick up Andi's patch since it seems to work for you and him and it looks like Android drivers are not using
I2C_M_NOSTART. I wonder if this was some quirk/big on the platform where it was originally developed.
I completely forgot about that patch :)
I should refresh some old work on that device which was left undone.
Quoted 1 line
Any objections?
It's OK for me. If you can just update my e-mail, please, when applying the patch to "[email protected]". Thanks!
Thank you,
Andi
Dmitry Torokhov
maintainerRe: [PATCH 3/3] Input: mms114 - add support for mms345l
Quoted 14 lines · Andi Shyti
Hi Dmitry,
Quoted 9 lines
Quoted 4 lines
There was a related patch [2] that removes
I2C_M_NOSTARTfor all models, but it seems abandoned and I do not have any other model for testing. Therefore, this patch implements the least instrusive solution and only removesI2C_M_NOSTARTfor MMS345L.Hmm, at this point I am inclined to pick up Andi's patch since it seems to work for you and him and it looks like Android drivers are not using
I2C_M_NOSTART. I wonder if this was some quirk/big on the platform where it was originally developed.I completely forgot about that patch :)
Quoted 7 lines
I should refresh some old work on that device which was left undone.
Quoted 1 line
Any objections?
It's OK for me. If you can just update my e-mail, please, when applying the patch to "[email protected]". Thanks!
Andi, any chance you could resend it with the new email? One thing that I try to avoid modifying whenever I can is S-O-B strings...
Thanks.
Signature · 1 line
Dmitry
Re: [PATCH 3/3] Input: mms114 - add support for mms345l
Hi Dmitry,
Quoted 15 lines
Quoted 15 lines
Quoted 9 lines
Quoted 4 lines
There was a related patch [2] that removes
I2C_M_NOSTARTfor all models, but it seems abandoned and I do not have any other model for testing. Therefore, this patch implements the least instrusive solution and only removesI2C_M_NOSTARTfor MMS345L.Hmm, at this point I am inclined to pick up Andi's patch since it seems to work for you and him and it looks like Android drivers are not using
I2C_M_NOSTART. I wonder if this was some quirk/big on the platform where it was originally developed.I completely forgot about that patch :)
I should refresh some old work on that device which was left undone.
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
Any objections?
It's OK for me. If you can just update my e-mail, please, when applying the patch to "[email protected]". Thanks!
Andi, any chance you could resend it with the new email? One thing that I try to avoid modifying whenever I can is S-O-B strings...
sure, I will resend the patches, but it might take some time (a few days I hope) because I don't have the devices with me right now for testing (and I added some small fixes, as well)
Thanks,
Andi
Re: [PATCH 3/3] Input: mms114 - add support for mms345l
In reply to Dmitry TorokhovQuoted 25 lines · Dmitry Torokhov
Quoted 19 lines · Stephan Gerhold
MMS345L is another first generation touch screen from Melfas, which uses the same registers as MMS152.
However, using
I2C_M_NOSTARTfor it causes errors when reading:i2c i2c-0: sendbytes: NAK bailout. mms114 0-0048: __mms114_read_reg: i2c transfer failed (-5)The driver works fine as soon as
I2C_M_NOSTARTis removed.Add a separate melfas,mms345l binding, and make use of
I2C_M_NOSTARTonly for MMS114 and MMS152.Signed-off-by Stephan Gerhold <[email protected]>---
Note: I was not able to find a datasheet for any of the models, so this change is merely based on testing and comparison with the downstream driver [1].Quoted 4 lines
There was a related patch [2] that removes
I2C_M_NOSTARTfor all models, but it seems abandoned and I do not have any other model for testing. Therefore, this patch implements the least instrusive solution and only removesI2C_M_NOSTARTfor MMS345L.
Quoted 6 lines
Hmm, at this point I am inclined to pick up Andi's patch since it seems to work for you and him and it looks like Android drivers are not using
I2C_M_NOSTART. I wonder if this was some quirk/big on the platform where it was originally developed.Any objections?
I cannot really speak for any of the other models, but no objections for removing I2C_M_NOSTART from my side. I'm actually rather confused by it since it is used on the first partial message.
The documentation [1] says:
If you set the I2C_M_NOSTART variable for the first partial message, we do not generate Addr, but we do generate the startbit S. ** This will probably confuse all other clients on your bus, so don't try this. **
Yet, someone felt like trying this here. ;)
I have tested the following two patches from Andy on MMS345L:
- Input: mms114 - use smbus functions whenever possible [2]
- Input: mms114 - get read of custm i2c read/write functions [3]
Indeed, with I2C_M_NOSTART removed I can actually use "melfas,mms152" and the touchscreen appears to work without further changes. (The only weird thing is that it displays an empty "Compat group" in
"TSP FW Rev: bootloader 0x6 / core 0x26 / config 0x26, Compat group: ",
I suspect that register does not exist on MMS345L...)
But there is a limitation that won't let us take these two patches as-is:i2c_smbus_read_i2c_block_data() is limited to I2C_SMBUS_BLOCK_MAX, which is: 32 /* As specified in SMBus standard */
According to "Input: mms114 - use smbus functions whenever possible":
Quoted 3 lines
The exchange of data to and from the mms114 touchscreen never exceeds 256 bytes. In the worst case it goes up to 80 bytes in the interrupt handler while reading the events.
Since i2c_smbus_read_i2c_block_data() is limited to 32, larger packets won't be read correctly. For example, if you use more than 4 fingers you can easily trigger a situation where one of the fingers gets "stuck", together with: mms114 4-0048: Wrong touch type (0)
(It attempts to read uninitialized data in this case...)
So we still need the custom functions for reading the touch packet, or maybe change the driver to use regmap instead.
[1]: https://www.kernel.org/doc/html/latest/i2c/i2c-protocol.html
[2]: https://patchwork.kernel.org/patch/10189551/
[3]: https://patchwork.kernel.org/patch/10189541/
Re: [PATCH 3/3] Input: mms114 - add support for mms345l
Hi Stephan,
Quoted 16 lines
Quoted 11 lines
Quoted 4 lines
There was a related patch [2] that removes
I2C_M_NOSTARTfor all models, but it seems abandoned and I do not have any other model for testing. Therefore, this patch implements the least instrusive solution and only removesI2C_M_NOSTARTfor MMS345L.Hmm, at this point I am inclined to pick up Andi's patch since it seems to work for you and him and it looks like Android drivers are not using
I2C_M_NOSTART. I wonder if this was some quirk/big on the platform where it was originally developed.Any objections?
I cannot really speak for any of the other models, but no objections for removing
I2C_M_NOSTARTfrom my side. I'm actually rather confused by it since it is used on the first partial message.
Quoted 7 lines
The documentation [1] says:
If you set theI2C_M_NOSTARTvariable for the first partial message, we do not generate Addr, but we do generate the startbit S. ** This will probably confuse all other clients on your bus, so don't try this. **Yet, someone felt like trying this here. ;)
still it should be specified in the i2c protocol of the device, if it's not, then most probably it's not needed, I guess.
Andi